Problem with Broadcasting Web query

I am able to broadcast the web query and I recieve the email in MS Outlook, but the report is unreadable. It has the proper header info (from, to, subject, ...), but the report itself shows up as garbled text ("Q29udGVudC1UeXBlOiBtdWx0aXBhcnQvcmVsYXRlZDsNCiBib3VuZG").
I tried the different output formats in Broadcaster, but no luck. Anyone else experience this?
Thanks in advance.

Check the o/p of the sent mail from tcode SOST. if the o/ format looks fine in SOST, the problem could be on the Mail server (Exchange or Lotus notes).
What version of MS Outlook/ MSExchange server are you using? I have seen issues with MS Exchange 2002>.
Thanks.

Similar Messages

Problems with Input Ready Query

Hello All,
I'm facing problems with input ready query for BI IP.
I've created the input query on aggregation level and maintianed all the planning settings. It is not allowing me to edit, when i'm attaching in the web template.
I also attached a button copy function, and i'm able to execute it and save it, but it not allowing me to change manually.
I also enabled the 3rd option for keyfigures...data can be changed with planning functions and user input.
Please help me in this regard.
We have just started the development of BI-IP, please suggest me if there are any notes to be applied.
Regards
Kumar

Hello Johannes,
Yes I've set to the finest granularity...even if it is Only one characteristic and one key figure without any restrictions...
I've checked even planning tab page under properties...it is also fine..
But still it is not allaowing me to go to edit mode...this is a fresh instalation and the query i'm working is the first one...
Please suggest me if there are any notes to be applied, we are on Support Pack 10.
Regards
Jeevan Kumar

List of Problems with new Web Mail

List of Problems with NEW Web Mail :
- At first doesn't open full page message list or retain full page as default setting, have to drag down bar
- Only shows 20 message lines after “pulling down” the divider, screen partially empty until I scroll down. It should show at least 26, preferably all available
- After moving bar, bar moves back up after going back to inbox (not delete message) after reading a message, have to move it down again, and again...
- Doesn't go to next message when delete message on screen is selected, no setting option for default to do this.
- There is a drop down to select which folder to move a selected email to. The initial display shows 7 usable choices, with the usual slider and arrow to show more choices. The space on the slider clearly shows more choices are present (actually about 20 or so are there), but any attempt to use the slider or arrow to see more choices causes the drop-down to instantly disappear. I can't move the selected field with arrow keys either. I can select any of the visible 7 choices, and move an email to only one of the 7. NOTE: This one works in both IE and Firefox, but if Verizon Webmail was fully web standard (see http://en.wikipedia.org/wiki/Web_standards) compliant it would also work in my preferred browser, Mozilla Seamonkey, the direct descendant of the original Mozilla browser. Webmail should be FULLY web standard.
- Occasionally a message will move from inbox to trash, without NO indication or command to move them.
- Emails occasionally flash an error message and simply disappear - not to trash or other findable place, just disappear. No time to read the error message either.
- No way to set a whitelist for supposed spam emails, unless the whitelist for “Blocking” is the same. Very unclear.
- How can I switch my service back to the original, basic, email which works ok? I know it’s still there, since some of my other accounts still access it!!!
This seems my only way of getting this info direclty to the programming staff. If it doesn't actually do this, will SOMEONE PLEASE FORWARD THIS MESSAGE TO THEM !?!
Thanks!

vz_ric wrote:
The majority of websites are set up the same way for all browsers. It's the software manufacturers responsibility to make their software compatible with websites, not the other way around. Otherwise everyone who has a website will have to make 10 different sites to work multiple browsers.
Contrarily, it is Verizon's, as well as other companies like Verizon whose customer base uses a wide variety of web browsers, web page designers' responsibility to use only standard W3C-recognized code and not to use non-standard non-W3C-recognized code, e.g., Microsoft's Internet Explorer specific code, when designing their web pages. In my opinion based on my observations, Verizon's web page designers are too often guilty of using IE-specific code.

Problem with RESTful web service

I am running into a problem with Flex Web Services (REST) in trying to get the proper format returned. I can see that the HTTP header is set to
Accept: */*;
rather than
Accept: application/xml
when sending the request. The web service was generated via the web services HTTP data services wizard. I edited it to set the resultFormat to xml
    // Constructor
    public function _Super_UsersService()
        // initialize service control
        _serviceControl = new mx.rpc.http.HTTPMultiService();
         var operations:Array = new Array();
         var operation:mx.rpc.http.Operation;
         var argsArray:Array;
         operation = new mx.rpc.http.Operation(null, "getUsers");
         operation.url = "http://localhost:8888/users";
         operation.contentType = "";
         operation.method = "GET";
         operation.resultFormat = "xml";
         //operation.serializationFilter = serializer0;
         operation.properties = new Object();
         operation.properties["xPath"] = "/";
         operation.resultType = valueObjects.Users;
         operations.push(operation);
         _serviceControl.operationList = operations;
         model_internal::initialize();
How does one configure the accept header?

Hi,
I have posted a simple application with the RESTful reference:
http://apex.oracle.com/pls/apex/f?p=13758
I can give you full privileges on this so you can look at the WEB service reference. Shall I send to you separately for login user?
It is using the RESTful service: http://apex.oracle.com/pls/apex/nd_pat_miller/demo/employee/{deptno}
This RESTful service tests fine when I test from within the RESTful web service module of the Workspace.
I based this on the Video demo tutorial for RESTful web service that Oracle published for 4.2 release. The video seemed to exclude the {deptno} in the URL but when I try that, it doesn't work either.
This is the error I am getting when I run this on my Apex environment: (it, of course, will not run the web service in the apex.oracle.com environment)
class="statusMessage">Bad Request</span>
</h3>
</div>
</div>
<div id="xWhiteContentContainer" class="xContentWide">
<div class="xWhiteContent">
<div class="errorPage">
<p>
<ul class="reasons"><li class="badRequestReason"><span class="target" style="display:none;">uri</span><span class="reason">Request path contains unbound parameters: deptno</span></li>
</ul>Thanks,
Pat
Edited by: patfmnd on May 8, 2013 3:33 AM

Problems with Java web start

Hi All,
I am facing a problem with Java Web Start. Which is the most appropriate version of JDK recommended for SAP XI? I tried
JDK 1.4.2_04
JDK 1.4.2_09
JDK1.4.2_11
JDK1.5.0_01
When I click on Integration repository or Directory for the first time, it loads the jar files and while loading, I get an error msg "Unable to launch Integration Builder". After a lot of retries I get sucess. But still we are facing this issue in some machines. Can you pls let me know if there is any pre configuration or some thing I am missing...
Regards,
Jai Shankar

Did you check the proxy settings in JAVA Web start. Please follow the below instructions.
This could be set to None or to specific for values HTTP Proxy and HTTP Port .
Contact your network administrator for the correct settings.
To change the Proxy Settings:
Select Windows Start menu -> All Programs -> Java Web Start -> Java Web Start
Choose File -> Preferences -> General
Choose None to switch off the proxy settings or Manual to set the HTTP Proxy and HTTP Port.
ChooseOK
Close Java Webstart

Firefox is having problems with certain web sites, but IE is ok

Top of page is present in IE but not in latest Firefox.

Is it a safe assumption that website is your's? <br />
What difference does it make which browser '''''you''''' use? Isn't your website for client's or potential clients?
That said, I don't have a problem with that web page on Firefox 2.0.0.20, 3.0.19, 3.5.16, 3.6.13, or the 4.0b9 nightly - it looks the same as in IE8 on 32-bit WinXP SP3, with an AMD 64-bit processor.
The problem shown in your screenshot is with your own Firefox installation. It's like all the "styling" is turned off.
''''' "I infer Firefox needs a 64 bit version." ''''' <br />
What good is a 64-bit browser without 64-bit plugins? <br />
Adobe still hasn't released a 64-bit version of Flash, although they do have a "preview" version available. <br />
http://kb2.adobe.com/cps/000/6b3af6c9.html
''BTW, Mozilla does have a Windows 64-bit version of the Firefox 4.0 betas that is being tested now, but it is not going to be released in Jan / Feb when Firefox 4.0 is released. It will probably be released later in 2011 with one of the 4.# versions, I suspect right after Adobe has a 64-bit Flash release version.''

Problem with iPlanet Web Server 6

We are getting an intermittent problem with our web server, the users start to get problems connecting to the web site.
I have found the following message in the error log -
failure ( 2390): Error accepting connection -5928, oserr=130 (Connect aborted)
can anybody help???

Check out the below.
Problem 4680491. CSS causes oserr=130 in iWS 6.0 logs.
Workaround
If you are using the Cisco Content Services Switch (CSS) with Sun ONE Web Server and have set the value of the sticky bit setting in CSS to on, the following error is logged periodically in the error logs:
failure ( 2210): Error accepting connection -5928, oserr=130 (Connect aborted)
This is caused not by a defect in Sun ONE Web Server but by the setting of the sticky bit in CSS. To avoid the error logging, set the value of the sticky bit in CSS to off.
Which as been fixed in iWS 6.0 SP5.
For more info check the below link.
http://docs.sun.com/source/816-6434-10/rn60sp5.html
Dakshin.

Problem with a Bex Query Report with Web Intelligence

Hello!
I have a Bex query (with query Bex version 7.0) I'm connecting with Web Intelligence (4.0) but one of the attributes instead of displaying the description shows only the key, and it is strange because other cubes if given by the conversion.
I wonder if there is a solution for this or if it is a problem of version 4.0 of Web Intelligence.
I await your response,
Greetings!

Hi,
Whereabouts in the application are you seing this problem? (in the query panel conditions, in the prompt list of values, or in the table block? )
also, what do you mean by "and it is strange because other cubes if given by the conversion" ?
it's worth noting that the "key and text display properties" in the Bex Query Designer do not influence webi. WebI consumes the global infoobject property from BW RSH1.
Regards,
H
p.s. if you need to understand which features are or are not supported with BI 4.0 tools, please look here: http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d056e1bc-2794-2e10-959e-8779c5623cc5

Problem with CFMX web service function return

I made a post yesterday about a web service function I was
writing, as it turns out my post was extremly incorrect for my
problem. With this web service function I can return an array just
fine, I can return one instance of an object just fine, however,
when I try to return an array of the object I keep getting the
error:
Could not perform web service invocation "SelectGames"
because AxisFault faultCode: {
http://schemas.xmlsoap.org/soap/envelope/}Server.generalException
faultSubcode: faultString: [org.apache.axis.AxisFault : ; nested
exception is: coldfusion.xml.rpc.CFCInvocationException:
[java.lang.IncompatibleClassChangeError : Dependent CFC type(s)
have been modified. Please refresh your web service client.]];
nested exception is: coldfusion.xml.rpc.CFCInvocationException:
[org.apache.axis.AxisFault : ; nested exception is:
coldfusion.xml.rpc.CFCInvocationException:
[java.lang.IncompatibleClassChangeError : Dependent CFC type(s)
have been modified. Please refresh your web service client.]]
faultActor: faultNode: faultDetail: {
http://xml.apache.org/axis/}stackTrace:
AxisFault faultCode: {
http://schemas.xmlsoap.org/soap/envelope/}Server.generalException
faultSubcode: faultString: [org.apache.axis.AxisFault : ; nested
exception is: coldfusion.xml.rpc.CFCInvocationException:
[java.lang.IncompatibleClassChangeError : Dependent CFC type(s)
have been modifie..
which basically means that the CF server needs restarted.
However if I restart the CF server, no matter how many times I am
still getting this error. If I change up my web service function to
return just a normal array of integers or strings, or I change it
to return one instance of the arbritrary complex type it all works
just fine. I am still a little new on this subject and any
enlightenment would be great. If anyone has found a way around this
please let me know.
Here is my complex type:
<cfcomponent>
<cfproperty name="Game_id" type="numeric">
<cfproperty name="gameDate" type="date">
<cfproperty name="Starttime" type="string">
<cfproperty name="Place" type="string">
<cfproperty name="Level" type="string">
<cfproperty name="Sport" type="string">
<cfproperty name="Gender" type="string">
<cfproperty name="Opponent" type="string">
<cfproperty name="Type" type="string">
<cfproperty name="Link" type="string">
</cfcomponent>
I loop trhough a query and set a cfobject of the types above,
then I append that object to an array and try t o return the array.
Here is the basics of the loop:
<cfset theArray = arrayNew(1)>
<cfobject component = "games" name = "test>
<cfloop query ...>

<cfset arrayApend(theArray, test)>
</cfquery>
<cfreturn theArray>
my return type is array, I think the problem is I need to
specify the return type to be an array of arbritray complex types
which is impossible to do in CF. Anyone find a way to get around
this?? Any feed back at all would be greatly appreciated.

Yes, I have tried it and return type any does not work in
this situation since this function is being consumed by a web
service. It needs to be in the form of an array of arbritrary type
that is defined in a cfc file. Since this is WSDL the returntype
has to be specified to every last bit.

Problem with timestamp in query

I have problem with timestamp in JPA query.
I wonna select all data from database where difference between two timestamps is more than 3 month.
Database:
ID timestamp1 timestamp2
1 20008-11-19 15:02000 20008-08-19 15:02000
2 20008-11-19 15:02000 20008-11-14 15:02000
@Column(name = "timestamp1", nullable = false)
@Temporal(TemporalType.TIMESTAMP)
public Date timestamp1;
@Column(name = "timestamp2", nullable = false)
@Temporal(TemporalType.TIMESTAMP)
public Date timestamp2;
sql query works:
select id from table where
MONTH( DATE(timestamp1) - DATE(timestamp2) ) > 3
but how I can write in Java?
I't doesnt wrk:
Query query = em.createQuery("SELECT f.id FROM Foo f WHERE MONTH( DATE(f.timestamp1) - DATE(f.timestamp2) ) > 3 ")
error:
ExceptionUtil E CNTR0020E: EJB threw an unexpected (non-declared) exception during invocation of method .
Exception data: <openjpa-1.0.2-r420667:627158 nonfatal user error> org.apache.openjpa.persistence.ArgumentException: An error occurred while parsing the query filter 'SELECT f.id FROM Foo f WHERE MONTH( DATE(f.timestamp1) - DATE(f.timestamp2) ) > 3'.
Error message: <openjpa-1.0.2-r420667:627158 nonfatal user error> org.apache.openjpa.kernel.jpql.ParseException: Encountered "MONTH (" at character 438, but expected: ["(", "+", "-", ".", ":", "", "=", "?", "ABS", "ALL", "AND", "ANY", "AS", "ASC", "AVG", "BETWEEN", "BOTH", "BY", "CONCAT", "COUNT", "CURRENT_DATE", "CURRENT_TIME", "CURRENT_TIMESTAMP", "DELETE", "DESC", "DISTINCT", "EMPTY", "ESCAPE", "EXISTS", "FETCH", "FROM", "GROUP", "HAVING", "IN", "INNER", "IS", "JOIN", "LEADING", "LEFT", "LENGTH", "LIKE", "LOCATE", "LOWER", "MAX", "MEMBER", "MIN", "MOD", "NEW", "NOT", "NULL", "OBJECT", "OF", "OR", "ORDER", "OUTER", "SELECT", "SET", "SIZE", "SOME", "SQRT", "SUBSTRING", "SUM", "TRAILING", "TRIM", "UPDATE", "UPPER", "WHERE", <BOOLEAN_LITERAL>, <DECIMAL_LITERAL>, <IDENTIFIER>, <INTEGER_LITERAL>, <STRING_LITERAL>].
at org.apache.openjpa.kernel.jpql.JPQLExpressionBuilder$ParsedJPQL.parse(JPQLExpressionBuilder.java:1665)
at org.apache.openjpa.kernel.jpql.JPQLExpressionBuilder$ParsedJPQL.<init>(JPQLExpressionBuilder.java:1645)

The error is indocating improper formatting of your JPQL string. MONTH is not understood. I would recommend using your SQL string in a createNativeQuery(...) call instead.
Doug

Problem with unit in Query

Hallo Experts,
We encounter a problem with unit in our Query.
Szenario:
We use the Unit like PC, SET in Query.
In Table T006 those Units have value 0 in the field ANDEC, so they will be rounded up and rounded down in Query.
Our Problem is some Queries need the rounding up and down but others don't need this function.
Where and how should we change to solve the problem.
thanks & Best regards

hi,
if you want to control the rounding off while unit conversion you can do it from SPRO
In the BW system, goto SPRO -> SAP NetWeaver -> General Settings -> Check Units of Measurement -> Units of Measurement -> Choose the unit corresponding to 'KM' -> Click on 'Details' button in the toolbar.
Look the field 'Decimal Pl rounding'. Change this to 3 or whatever value you choose and see if it works.
in above link i have taken example of KM, you need need to select the required unit.
let us know if this is solves your problem. I am not sure if this can be done for individual queries but this is controlled by UOM wise as mentioned above.
Regards,
Rk.

Problem with enabling Web Services on LaserJet Pro MFP M127fw

12:25 AM
I have a problem with enabling the HP Web Services. When I push the application button on the printer, the monitor shows "connecting..." and then nothing is happen or an error apear thet my device could not connect to servers. I can't print information sheet on web services panel to get the claim code and add my device in www.hpconnected.com . My device is connected to the internet with no problem by a wireless Dlink Router. I also changed my device IP from 192.168.1.11 to 192.168.1.55 manually, and I change Preferred DNS Address to 8.8.8.8 and Alternate DNS Address to 8.8.4.4 and nothings happen. I can see the menu but I can not enable the HP Web Services in there. no proxy. no firewall. I do not know what can I do for solveing this problem. Please help me.

Hi @AlirezaP
Welcome to the HP Support Forums. I gather that you are getting a connection error message when trying to enable the web services for your Laserjet Pro M172fw printer.
As you have already tried setting the manual IP address and manual DNS servers, please call HP’s Cloud Services at 1-855-785-2777 if you live in the USA/Canada region. If you live outside the USA/Canada region please click here to find the Technical Support number for your country/region.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Printing problem with my web pages

Hi all-
I noticed a funny problem with one of my web pages. When I go to print, it only prints one page length of a webpage that should be two pages long (assuming you choose the shrink width to fit one page wide option in your print command).
I post messages with training schedules and people sometimes want to print the page, I'm not looking for pdf or anything, just a simple print the whole web page. When I print, the second half of the webpage comes out blank. I tried saving at a pdf from the print window, and the same thing happens.
The page I'm trying to print out is at:
http://web.mac.com/gdefrancis/FSNordic/FSTeam_News/Entries/2008/12/22_JNT_Holiday_Training_and_PracticeSchedule.html
Note that is stops printing (or leaves a pdf converted from the webpage blank) after the 12.21 entry.
any suggestions?
thanks!
Greg

Greg ~ On a now archived thread, you wrote:
I would love people to look at my various sites and let me know what you think!
Looking at your Nordic Ski site, it occurred to me that it could benefit from some Social Networking features. Take a look at this site:
http://my.steamboat.com
...built with this free, web-based tool:
http://www.ning.com
Each Network's "look" is fully customizable — click on the thumbnail for their product overview:

Caching problem with iFS web server / index.html

There seems to be a problem with the iFS Java web server serving cached index.html documents after they have been modified.
This only happens when the document is referenced by the folder name (e.g. /home/kennu/). If you reference it by the full name (/home/kennu/index.html), the new modified version comes up alright.
I wonder if this is a bug or some kind of a feature? Is there an quick and easy workaround?
Byt the way, is this the correct place to post bug reports? I didn't see iFS mentioned in the OTN Bug Database.
null

well, this is certainly not an intended effect. i'll look into it. in the meantime, the workaround already posted should pull you through.
sorry about the inconvenience.
-ilya
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Kenneth Falck ([email protected]):
There seems to be a problem with the iFS Java web server serving cached index.html documents after they have been modified.
This only happens when the document is referenced by the folder name (e.g. /home/kennu/). If you reference it by the full name (/home/kennu/index.html), the new modified version comes up alright.
I wonder if this is a bug or some kind of a feature? Is there an quick and easy workaround?
Byt the way, is this the correct place to post bug reports? I didn't see iFS mentioned in the OTN Bug Database.<HR></BLOCKQUOTE>
null

RSRT1 problem with JAVA WEB

Hello Gurus,
I have serious problem with my Java stack (or BI configuration). I have sample report which I have tested with transaction rsrt1. When I choose [Abap WEB] button - web page opens showing table filled with data. When I choose [Java WEB] button - web page opens with message "no applicable data found". What's wrong?
I'm wainting for your hints, because I have no idea what and where I did wrong.
Regs,
FS

Hello,
you have to redo your report. Try to design very simple one, without any filters, many fields etc. It worked for me ... then I extended it step by step and it works.
Regs,
FS

Problem with Broadcasting Web query

Similar Messages

Maybe you are looking for