Problém with call settings after upgrade to os 10.1.0.273

Dear, I Have really big issue after upgrade to new version of OS 10.1.0.273. I have set on my sim Card service CLIR. And i am not able to switch this service now, cause call settings menu are MISSING in application Phone. Item fór CLIR and Conference call etc are missing. And default service settings IS not show my caller ID, that all my caller are with hidden identity. Its BIG issue fór out business. Thanks in advance fór help Petr

After 2nd reboot is problém fixed.

Similar Messages

Z10 not able to call oversea after upgrade to version 10.1.0.273

I live in Thailand and I usually make call to Malaysia using 009 service from CAT. The full number will be 0096057163xxx and I have been using 009 services for more than 10 years. After upgraded to version 10.1.0.273, I'm not able to make oversea call with 009 services. The reply is "The number you are calling is not in service", I try call with other mobile phones and everything work as per normal. I doubt the the latest version are not able to read and dial the first 2 digits "00". Please help to provide a solutions.

Checked with BB call center Thailand and they have not received similar complain from other customer, no solutions neither. I try making oversea call with 001, 007 and 008 follow by country code, all having the same problem. Especially for 008 follow country code 60 (Malaysia), it ends up calling to China. It seems like the firmware do not recognized the 3rd digit as it read it as 'country code' instead of international call service offer by CAT Thailand. This is really PISS me off and I hope RIM can do something about it!!

Problems with video settings after upgrade to final cut 5.0

I upgraded my G5 to 10.4.10; and final cut to studio 5, and alkso tried studio 2 final cut 6
both times I get the message: cannot find firewire device. I am using a Sony DSR 25 dvcam deck, and it is recognized a such on the firewire buss in the About this Mac display..
also, when I boot final cut (ver. 5) by clicking continue; In View the external video is permanently Off - it will not allow me to click All Frames.
In av system settings: the video preference is: none, and this message :(missing) firewire ntsc 720x480..that is the message - "missing" ????
lastly, I un-installed all previous final cut versions.
any insight?
thanks
apple G5 Mac OS X (10.4.10) second HD/workdrive

You can try the tip described here (specially the terminal command):
http://gizmodo.com/5938452/a-trick-to-make-using-an-external-monitor-with-your-m acbook-way-better
Regards.

Cannot navigate in 3G with my IPAD after upgrading to firmaware 4.3.5(8L1)

All,
I have an issue with my ipad after upgrading the firmware to V 4.3.5 (BL1) : I cannot navigate in 3G any more even if I get a good signal.
After a while I get the message (Impossible to connect to the server)
I am using a microsim provided by an italian operator called "Tre" (http://www.tre.it/promozioni/internet-mobile/ricaricabile-per-ipad?gclid=CNXtxeD z3asCFRpggwodqCNTRw )
Note: i had no problem before of the upgrade
Reading some italian forum I saw this is a software bug and it will be apple resposability to fixing it in pacth and the issue might occurs with other operator as well
Xref http://www.iphoneitalia.com/forum/generale-iphone-3gs/75009-problema-con-rete-tr e.html
Xref http://www.iphoneitalia.com/problemi-in-3g-con-vodafone-dopo-laggiornamento-a-io s-4-3-218559.html
Anybody know anytyhing about this?
thx
tony

iPadCKQ-
You may have purchased a used iPad that someone had returned. Perhaps iOS 5 will allow you to operate it out-of-the-box, but in that past you had to activate it using iTunes on your computer.
Or maybe someone swapped iPads with you when you weren't looking?? Try running the Settings App. Go to Settings-General-About. Is the Name correct or someone elses? What version is listed there?
Fred
Message was edited by: Fred*M.

Problem with Java Script after upgrade from BW 3.5 to BI7

Dear Colleagues,
We're facing the issue with Java Script after upgrade of BW 3.5 to BI7.
Just after update we checked the basic functionality and it occured that some of web templates that use Java Script don't work. They generate seelction screen, but after selection the screen becomes blank without any error messages.
We're currently stucked since web templates weren't converted to BI7 version so they should work exactly as before the upgrade.
We compared the Java code with other environment that was not upgraded - it's perfectly the same.
The only explanation that comes to my mind is that some Java Script settings on the server level were changed during the upgrade but I have no idea where I can check that.
Thanks in advance for any suggestions,
Andrzej Bobula

Hi Deepu,
Thanks, it was great to read your reply and then few minutes later talk to you live on SDN Day!
Unfortunately, http cache clean-up did not help. But there is another funny thing I found - for exactly the same 3.5 webtemplate html code returned from WebAS 3.5 was different then from 7.0.
Unfortunately, this editor does not allow to paste complete code, even in CODE brackets, but here are main differences:
<b>3.5</b>
if (navigator.appName == "Microsoft Internet Explorer")
<frame src="/sap/bw/BEx?SAP-LANGUAGE=E&PAGENO=1&REQUEST_NO=1&CMD=GET_TEMPLATE"
name="Content">
and
<b>7.0</b>
if (navigator.appName.indexOf("Microsoft Internet Explorer")!=-1)
<frame src="/sap/bw/BEx?SAP-LANGUAGE=E&PAGENO=8&REQUEST_NO=0&CMD=GET_TEMPLATE"
name="Content" 0nLoad="javascript:loadTitle()">
(I intentionaly put 0 i/o o in 0nLoad, otherwise Forum's editor does not accept the text.
How about SAP's claim that technical upgrade from 3.x to 7.0 changes nothing?
Regards,
Vitaliy

Anyone else having trouble with missing ringtones after upgrading to 8.1.1

Anyone else having trouble with missing ringtones after upgrading to 8.1.1?

Try resetting the keyboard dictionary
Settings>General>Reset>Reset Keyboard Dictionary

Reception / Battery problems with iPhone 3GS after upgrading to iOS 4.2.1

There are major reception and battery problems with iPhone 3GS after upgrading to iOS 4.2.1.
I can not believe that Apple did not test this for major bugs like this one is.
I am a business user and can not effort to have bad reception. Apple wants to gain in the business clients... I never had this with my former BlackBerrys!
I need a reliable phone not a play thing like this is right now, it just needs it to work propely. And if a major bug like this comes along, fix it immediately. After the iPhone4 story, now this...incredible! Going back to my reliable BlackBerry! It just ain't reliable and takes forever to fix a problem.

I have the same issue after iOS 4.2.1 update. I am using iPhone 3GS officially unlocked by Apple. I tried using different SIM cards and both carriers show same problem when using phone in 3G mode. Phone falls back to EDGE mode showing 'E' from '3G' at start. I have reset the phone and rebooted several times and moved to different cell areas in the city just to verify the problem.
I had no such issues earlier. I also have Nokia E71 which shows full signal and has no such issues.
I have posted the bug on apple iphone feedback page. I hope they Apple will fix the problem and test the release properly on all models before releasing to public.

Command, Control, and Option keys no longer works with Citrix Receiver after upgrading to OSX 10.9.5

At first my keyboard did not work with Citrix Receiver after upgrading to OSX 10.9.5 and I found the workaround by using "cmd + tab," however, once my keyboard work within Citrix, the "command, control, and option" keys no longer work. Does anyone have a remedy for this?

Keyboard no longer works with Citrix Receiver after upgrading to OSX 10.9.5

Issue with VO extension after upgrading from 11i to R12

Hi All,
We are facing issue with VO extension after upgrading from 11i to R12(12.1.3).
Most of the cases we are facing issue as given below,
oracle.apps.fnd.framework.OAException: oracle.jbo.AttributeLoadException: JBO-27022: Failed to load value at index 21 with java object of type java.lang.Boolean due to java.sql.SQLException.
Please help me out to resolve this issue.
Any help/suggestion will highly appreciate.
Thanks & Regards,
Sunita

Hi Gyan,
Thanks for the response.
There is one attribute has added in VO query.
In VO.xml file ViewAttribute definition is as given below,
<ViewAttribute
Name="DisplayApproveButton"
IsUpdateable="false"
IsQueriable="true"
IsPersistent="false"
Type="java.lang.Boolean"
ColumnType="NUMBER"
AliasName="DisplayApproveButton"
Expression="xxh_invoice_approval_pkg.check approval(invoice_id)"
SQLType="BIT" >
</ViewAttribute>
Thanks & Regards,
Sunita

I have a problem with my iphone,after upgrade software ios 6.0.1, is not possible to use the wi-fi, used until now, because is not possible to have the login, i find this message " the requested URL was not found

I have a problem with my iphone,after upgrade software ios 6.0.1, is not possible to use the wi-fi, used until now, because is not possible to have the login, i find this message " the requested URL was not found

You have to go to autherized iPhone agent.

Am running Firefox 3.6.10. Am having problems with Firefox crashing after upgrading to Kaspersky Internet Security 2011. Anyone else having same problem. Oh, BTW am still using Windows XP operating system.

Am running Firefox 3.6.10. Am having problems with Firefox crashing after upgrading to Kaspersky Internet Security 2011. Anyone else having same problem. Oh, BTW am still using Windows XP operating system.

The latest flash player release is 11,0,1,152.
Can you upgrade to this version and see whether the crash stil exists?
Go to get.adobe.com/flashplayer to download and install flash player.
In case you need direct link to installer/uninstaller, please go to http://forums.adobe.com/message/3952360#3952360 to find them.
saranlee wrote:
My computer crashes repeatedly and I get the message pages are not responding do you want to stop, and/or shockwave is not responding do you want to stop. I have Windows XP Service Pack 3, I am having the same issues whether I use Internet Explorer, Google Chrome, or Mozilla Firefox. My HP Pavilion Desktop has 504 MB of Ram and I am using high speed internet connection. Because it was crashing so much, I used the uninstall program for Flash player to uninstall Flash, I checked my registry and removed anything I saw that was Flash. I then uninstalled Google Chrome and Mozilla Firefox, then I reinstalled the most recent versions from their websites. I did the same for FlashPlayer and Shockwave Flash. I went to the Adobe website and had them check to see if it was working and it shows I have FlashPlayer 10.3.181.36. The page that shows which version of flash player goes with Windows XP states that I should have 10.3.181.34 (This is what I thought I had before I updated, I was having the same problems). When I went into my computer to see what version I have, it shows 11.5.9.620 Activex and both Flash Player and Flash Player Object is listed as 10.3.181.34. My firewall for Windows is set to medium. I also am running Norton Internet Security. It takes anywhere from 3-6minutes for some of my games to load, and I have to refresh at least 3-4 times in order to play. When I do start to play it freezes frequently and I use escape to free it up. This has been going on for a month. I have no idea what to do. I am not very computer savy and I have been learning as I go.

How long does verifying iPad restore with Apple take after upgrading?

How long does verifying iPad restore with Apple take after upgrading iTunes? It's been hours & my pc won't let me close because of it.

Should happen immediately...are your firewalls & anti-virus software turned off? If not, turn all of that stuff of & try again.

HT201250 How to restore all my mac book pro (mid 2009) files, data, Mavericks and settings after upgrading HD (250 to 500GB) from my Time Capsule?

Hi everyone!
Please, I need a big help from you!
Do you know how to restore from Time Capsule all my mac book pro (mid 2009) files, data, Mavericks and settings after upgrading HD (250 to 500GB)?
Thank you very much!
Best regards,
Marcio

Recover your entire system
See 14.
Time Machine FAQ

Problems with IMAQ Vision after upgrading from Labview 6i to Labview 6.1

Hi,
We just upgraded from Labview 6i to 6.1.To do this,we uninstalled the 6i version as was suggested by NI and then installed the 6.1 version.Later when we tried to run the old vi's written using Imaq vision, we ran into different problems.Has anyone experienced any similar problems with IMaq vision after upgrading?If so please help me solve this issue.
Thanx
deepak

What kind of problems?
I would strongly suggest that you uninstall IMAQ (all elements) and reinstall them. They register with Windows, probably docked to 6i, and also must be recompiled, which I believe is done in installation.
This is your best bet.
If you still have problems, contact NI and ni.com/ask and start a support inquiry.

Is anyone having trouble with accessing email after upgrading to iOS 6?

Is anyone having trouble with accessing email after upgrading to iOS 6?

Is anyone having trouble with accessing email after upgrading to iOS 6?

Problém with call settings after upgrade to os 10.1.0.273

Similar Messages

Maybe you are looking for