Problem with CN41 Info Profile

Hi experts,
i have added two customer specific fields in STRUCR structure.
In CJ20n its displaying properly.( Added those fields in AFVU. Designed in the screen also)
i have created PS Info profile with the same two fields. its showing zero after execution.
Please let me know what need to be done?
i want values from AFVU to CN41 Info profile .
Regards,
Malai.

To understand my issue better explaining in detail.
Added two zfields in AFVU( Planned cost field).
Mapped those fields with Screen . CJ20n show pucca.
Added same fields in STRUCR structure.
In CN41-> created info profile :
For a given getwork , the two fields shows zero value. But Actually for that network/ Activity values present in AFVU.
do i need to regenerate any program to get required value?
please help me out of this.
Regards,
Malai.

Similar Messages

Problem with *serial no. profile* in work sheduling view of material master

Hi ! !
I am here with a problem with serial no. profile in work sheduling view of material master.
By mistake for some FHMI type ( PRODUCTION RESOURCE TOOLS )materials, serial no profile exist in 'work sheduling' view. Due to that we are facing problem in GRN.
when I am trying to remove that with MM02. i m getting a message as Serial numbers already assigned to this material
Please suggest how to remove serial no. profile.
Thanks in advance,
Prab

Hi,
go to MMBE and check the Current Serial number...for FHMI type
and go to IQ02 and close the Serial number range at the Current number range...
Now you can assign this serial number range to another material type...
Thx
Raju

Problem with Creating Info Record

Hello Gurus,
I've problem with Creating Info Record
i tried to create info record for Plant Specific/Purchase Org
The first Screen General Data is OK
i entered all the data in the next screen ie
Purchase Organization Data screen but i'm getting error
Make an entry in all required fields
but there is Mandatory Textbox ie "VALID TO" which im unable to select Bcos its Disabled
pls help me regarding this
thanks in advance

Hi
Have u given the net price. VALID TO is the date until which the price shown in the info record is valid.
If there is no price that is valid on the current date, the last-valid price is displayed and the date field contains the day before the start of the next validity period (this may be 12.31.9999 if there is no further validity date). If all validit periods lie beyond the current date, the price of the next period is displayed. The date field then contains the end date of this period.
These validity periods we will maintain Purchse data CONDITIONS while creating info record. Check the validity period for the conditions.
Hope this will helps u
Ravi
Ravikumar Bolla

Problem with lion server - profile, wiki , postgresql

I have problem with lion server:
- Profile Manager Error Reading Setting
- Wiki Error Reading Setting
org.postgresql.postgres[3163]: postgres_real cannot access the server configuration file "/var/pgsql/postgresql.conf": No such file or directory

I have problem with lion server:
- Profile Manager Error Reading Setting
- Wiki Error Reading Setting
org.postgresql.postgres[3163]: postgres_real cannot access the server configuration file "/var/pgsql/postgresql.conf": No such file or directory

Problems with RWD Info Pak 5.5 and SAP 7.2

Hi, since the new SAP GUI was installed, I've been having problems with RWD Info Pak 5.5. I start to record Event step in SAP and when I stop and go back to the word document, Info Pak will not record any of the steps but might record pieces of snapshots.
Is anyone else having this problem or know if there is a fix?
Thanks!

Similar problem here, after updating xorg and nvidia driver the system freezes with nvidia logo on display and caps lock and scroll lock leds blinking.
I got nvidia geforce 7300.
Any solution to this besides downgrading?

Problem with DNG Color Profiles in Lightroom 5.4

Hello folks,
I recently updated from LR 5.3 to Lightroom 5.4 and since then I am having problem when using dng color profiles which were created with Colorchecker Passport. Every time I use such a profile which was created for my Nikon D 800 I get very greenish tones in the pictures.
I use Windows 7 Pro on a HP Z 210 Workstation. The monitor is a hardware-calibrated Quato which was recently calibrated.
Does anyone have this problem too and - if yes - know how to fix it?
Thanks!
Yours, Albert
PS: As English isn't my mother tongue I apologize for any mistakes in the text above.

Hello Andrew,
I do have a Nikon D 800 and a Fuji X-E1. I haven's noticed a problem with the Fuji so far. I think I will recalibrate my monitor tomorrow and see if the problem still exists.
I can supply raws and DNG profiles but I don't know where I should upload them - I suggest I could do it on my own webspace. Would that be ok?

HT204088 I have a problem with billing info.....

After the last purchase, it said that was a problem with billing the last purchase and need to verify my billing info, i put the password, trying to load and after few sec asks me again,i put again...the same....i tried at least 10 times and does that.....i check if my creditcard didnt have money and it has......i check the password it works (i tried a wrong pass and corrected me)......WHat is going on??? Please help....

I think iPhone is jus a bloody rip off I downloaded a app now I can't download another app I called customer service more then 10 times today they took away 15 pounds of my call time so I would recommend everyone not to use I phone they don't give much help but they love ripping poor customers like myself

A problem with the wireless profile

[nikos@dell ~]$ sudo netctl stop Nexus
[nikos@dell ~]$ sudo netctl start Nexus
Job for [email protected] failed. See 'systemctl status [email protected]' and 'journalctl -xn' for details.
[nikos@dell ~]$ journalctl -xn
-- Logs begin at Sun 2014-08-24 18:22:31 EEST, end at Wed 2014-08-27 15:55:28 EEST. --
Aug 27 15:55:23 dell sudo[4263]: pam_unix(sudo:session): session closed for user root
Aug 27 15:55:28 dell sudo[4269]: nikos : TTY=pts/0 ; PWD=/home/nikos ; USER=root ; COMMAND=/usr/bin/netctl start Nexus
Aug 27 15:55:28 dell sudo[4269]: pam_unix(sudo:session): session opened for user root by nikos(uid=0)
Aug 27 15:55:28 dell systemd[1]: Starting Automatically generated profile by wifi-menu...
-- Subject: Unit [email protected] has begun with start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit [email protected] has begun starting up.
Aug 27 15:55:28 dell network[4275]: Starting network profile 'Nexus'...
Aug 27 15:55:28 dell network[4275]: The interface of network profile 'Nexus' is already up
Aug 27 15:55:28 dell systemd[1]: [email protected]: main process exited, code=exited, status=1/FAILURE
Aug 27 15:55:28 dell systemd[1]: Failed to start Automatically generated profile by wifi-menu.
-- Subject: Unit [email protected] has failed
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit [email protected] has failed.
-- The result is failed.
Aug 27 15:55:28 dell systemd[1]: Unit [email protected] entered failed state.
Aug 27 15:55:28 dell sudo[4269]: pam_unix(sudo:session): session closed for user root
[nikos@dell ~]$ netctl list
* wlp2s0-Nexus
[nikos@dell ~]$ sudo ip link set down wlp2s0
[nikos@dell ~]$ sudo netctl start wlp2s0-Nexus
the above solved the problem but i dont understand why this probelem emerges after each reboot forcing me to regive these commands each time.
How can i entirely fix it and what is causing it?
and a 2nd issue is the 'pacman -Syy/u' fails each time to find a sinle one workin g mirror so i cannot update/upgrade

Change your router channel. Sometimes this is all you will have to do.
Power cycling the router. Read the router's user manual or contact their tech support for instructions.
System Preferences/Internet & Network/Network
Unlock the padlock
Locations: Automatic
Highlight Airport
Click the Assist Me button
In the popup window click the Diagnostic button.
System Preferences/Network- Unlock padlock. Highlight Airport. Network Name-select your name. Click on the Advanced button. Airport/Preferred Networks-delete all that is not your network.
Place a check mark next to "Remember networks this computer has joined." Click the OK button and lock the padlock. Restart your computer.
http://support.apple.com/kb/TS1920 Mac OS: How to release and renew a DHCP lease
No internet connection (wireless)
Check to see if an extra entry is present in the DNS Tab for your wireless connection (System Preferences/Network/Airport/Advanced/DNS).
Delete all extra entries that you find.
Place a check mark next to "Remember networks this computer has joined."
Other resources to check into:
How to diagnose and resolve Wi-Fi slow-downs
Pv6 troubleshooting
Mac OS X 10.6 Help: Solving problems with connecting to the Internet
What Affects Wireless Internet?
Solutions for connecting to the Internet, setting up a small network, and troubleshooting

Problems with 'Get Info' in movies and TV Shows

Hey all,
Very Recently I have acquired a problem with my iTunes application and specifically the 'Get info' option in movies and TV Shows. For some reason I when I use apple + I or go to file then 'get info' the information box for the item in question does not appear.I have tried restarting iTunes and also restarting my machine but the problem still persists. any help would be appreciated, thanks.

bump

Problems With Syncing Info To New Device

I have tried to sync info from my previous palm to my new palm. The sync is from the PC to the palm. The sync stalls when it gets to the calendar. It is just stuck there and I can't seem to get past it. Does anyone have any suggestions for me?

At the top of each section of the Forum are special posts that have a dark background. They are answers to questions that get asked repetitively - over and over and over again!
Yours is of this type. Please look at the top of the section for "problems with syncing contacts and calendar".
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Problem with data entry profile ESS ?

Hey All,
My problem is i have a data entry profile "ESS".
In CAT2 transaction i see the ESS data entry profile as follows (suppose)
A1 A2 A3 Mon Tue Wed .... Sat Sun A4
I assigned CVR parameter to this profile
Now in ESS i see the data entry section as
A1 A2 A3 A4 Mon Tue Wed ......Sat Sun
The order of the fields is getting sorted.
Is it anything to do with the settings you referred earlier?
Sriram

Hello all,
can anyone help me on this , iam being stuck on this for a quite a long time
Regards
sriram

Help: Problem with video driver/profile???

This is an unusual problem. I work on a Mac running OSX (10.3.9). I have InDesign CS installed. I downloaded the Adobe InDesign CS2 compatibility update and installed that. Once I did that my computer screen became unusually contrasty to the point where all my icons were blown out and the type became very faded and sketchy. I believe my video driver/profile has been affected. It goes away when I create a new user, so it isn't my monitor. Don't know if the download has anything to do with my problem, but that is when it started. Any ideas?
G-4 Mac OS X (10.3.9)
G-4 Mac OS X (10.3.9)
G-4 Mac OS X (10.3.9)
G-4 Mac OS X (10.3.9)

Thanks Niel. You hit the nail right on the head. I opened the System Preferences and adjusted the contrast in the Universal Access pane. Everything is back to normal. I had accidentally hit the short cut keys to adjust the contrast in my search for short cut keys in In Design. Thank you so much. Your help is greatly appreciated.
G-4 Mac OS X (10.3.9)

Problems with File Info Option

I've been getting completely frustrated adding specific information under the "description" table listed under File>File Info option in Bridge CS4.
Everything is greyed out and I cannot add information. I have to go through each of the 100s of images to find out that some of the images will not allow information added even though they were all taken with the same freaking camera.
Please help!!!!! I have 1000s of images and cannot go through each one to add copyright information etc...the files are not locked when I look under the finder option.
Is anyone else having this problem????

Thx!!!! It worked!!!!
Daniel K. Lee
Commercial Photographer
tel: 415.225.3289
email: [email protected]
www.DKLImages.com
2009/6/14 Ramón G Castañeda <[email protected]>
As for your problem, first purge the cache for the offending folder(s)
through the Tools menu in Bridge, as Omke says.
>
>
http://forums.adobe.com/servlet/JiveServlet/showImage/5441/Bridge_CS4_cache_prefs.jpg
>
If that doesn't do it, the trash your preferences by holding down the
Option key as you relaunch Bridge.
>
I will mention the obvious just in case: make sure you have full read and
write permissions to each file (do a Get Info on the file icon in the
Finder). Sometimes files get their permissions changed when copied over to
your drive, especially from a CD or DVD.
>
You cannot add metadata to an image that resides on a CD or DVD, and it
would be the same if the permissions are wrong.
>

Problems With Billing Info On iTunes...

Ok, I've read SEVERAL people on here complaining of the same exact thing that just happened to me last night. Here's the story: apparently, i had purchased 5 songs on iTunes and put them on my iPod with the same debit card I've been using for the past 2 years I've been using it (on iTunes, among other places). This was on 5/25. Yesterday, I logged onto iTunes to purchase another song and it kept telling me that my security code for my card was invalid. I kept re-entering the number several times to no avail. Then, it went from saying my security code was invalid to saying that they cannot process my request at this time. So I went to the support "express" lane and e-mailed a technical guy. While waiting for a response, I figured I'd give my bank a call to see what was happening. Apparently, they put a hold on my card because they noticed something "fishy" (a $1.00 charge and then a $1.00 credit) without notifying me. Because my card was on this "hold", Apple/iTunes was unable to bill me for the five songs I purchased on 5/25. So my bank then cleared the hold, and said there should be no problems after that...like I've said I've used the same card/same address everything for the past two years now without modifying or changing anything. So I went back in, and tried entering the same card again, and this time I got the dreaded, "Please contact iTunes support to complete this transaction." And that's the same message I kept getting. I've called three different numbers (no one helped), and I've e-mailed the support express lane from two different e-mail accounts.
Here's the response I got from both:
"After reviewing your account, I have contacted a supervisor for assistance. They told me that they fixed the problem. Please wait at least thirty minutes before accessing your account. This is necessary to prevent the error message from returning."
Guess what? I waited well over an hour, and am still getting the same **** message. Just so I didn't have some outstanding charges, I went back and entered my credit card information (to just pay for the five songs that had yet to be billed on 5/25) and it worked and the bill went through. So I went back in and tried to change it back to my debit card (who wants to pay interest, when you have never had to for the past 2 years??!) and I'm still receiving the same **** message. I've read all of these horror stories of how people went back and forth with this "support" over 30 times...that is ridiculous! Why the **** isn't there some number you can call to complain on this *** backwards "wait 24 hours before we give you a scripted response" nonsense?

And before this problem existed, there was never an option for "NONE" at the Billing Info menu for my iTunes account. When I logged on after the support allegedly corrected the problem, the "NONE" feature randomly appeared! I've even tried clicking NONE and then DONE to update it, and even that gives me the "Please contact iTunes support to complete this transaction." message.

Problem with Composer info/Album Artist/ tags & duplicate albums

I recently re-organized my iTunes library, which is on a network drive in my home. Since everything had gotten moved to new directories, I deleted all the songs from my iTunes library and re-imported everything. I've never been much of a playlist person, nor did I do any ratings of songs, so I saw this as a reasonable solution.
Everything seemed fine -- Some artwork went missing after I imported everything, probably because iTunes no longer sells a few of the albums I have? Not really sure, but I fixed that, and then noticed that a few of my albums were showing up with duplicates in Cover flow & Grid view. More specifically, I found several albums with "Album Artist" info for the first two tracks of the album, and then nothing in that field for the rest of the tracks. Likewise, there would be composer info for ONLY the first two songs, and none for the rest.
What would cause this? Does iTunes supply composer info? I'm not even sure where it's coming from, but now that I notice it, it's bugging me that several of my albums don't have any info in this field. Album Artist is easy enough to fix, but I'm not sure how to fix the composer field. Does Genius change or import any info for these fields? I did notice this right after I ran Genius, and when I ran Genius, I did lose my internet connection in the middle of it downloading info, and had to restore it.
Most of my CD's were ripped using Exact Audio Copy, and track info came from it's built-in freeDB utility. I just find it really odd that I've got a couple dozen albums like this, out of about 12,000 songs, and only the first 2 tracks of each album have Composer and Album Artist info.
Any ideas how to fix this?

Welcome to AD!
I think WMP did this to random tracks in my library. Nicely filling in Album Artist & Compser on some tracks, and removing the track x of y info (the y went missing) and putting weird '0000 0A540 0000 ....'comments in the comment field.
Interesting that it only happened on the first 2 tracks of these albums - it was completely random on my files.
iTunes doesn't update track info from the internet, but WMP does. I rarely use WMP and it happened right after a WMP update. I have since turned off the option for WMP to get info from the internet.
Anyway....to fix the Cover flow & Grid views in iTunes, you have to make the Album Artist field match.
Select all the tracks from a CD, right-click > Get Info.
Answer yes , you want to edit multiple items.
Type in the Album Artist field. You can do the Composer field while you're at it, assuming you like having that info there.
Maybe there is some MP3 tag editor that would be faster, but that's the only way to do it in itunes.
Or perhaps you have backups that don't have this mess in the tags.

Problem with CN41 Info Profile

Similar Messages

Maybe you are looking for