Problem with completed tasks
Hello
I'm having some doubts about the tasks already completed in a WF. In a concrete case, we have a document checking in one of our WF tasks, sending an UWL notification to the designated agent; in some point of the WF, if the processed info is not satisfactory, a loop returns the flow to the document checking task, but the notification in the UWL is not received by the agent, and if we check the WF log, the task appears as completed. is that because the WF registers a task as completed and even the task is executed again the completed status is not changed and this causes the problem?
Thanks in advance.
Hi,
I think in a workflow a dialog task can be executed once ...
pelase try by creating a new task by copying the task and calling it .
For background task loop works fine . Lets wait if some one has a better solution, because in the solution which i am giving a n-times loop is not possible ..... (you cant go on creating tasks :-D ) .
regards,
Naval Bhatt
Similar Messages
-
Problem with complete task via email
Hello,
I have problem with complete task via email. I found this blog very useful (http://blogs.adobe.com/ADEP/2010/11/how-to-complete-a-task-via-email-using-reply-to-comple te.html), but...
I set up everything as it’s written in blog mentioned above. When a task is assigned to me, I received an email notification with actions (accept, deny). After that I replied with action “accept”. Then I received email with subject “Errors from LiveCycle ES”:
LiveCycle ES has tried to process your request and encountered the following error:
com.adobe.pof.POFRuntimeException: Transaction is not active: tx=TransactionImple ; – nested throwable: (javax.resource.ResourceException: Transaction is not active: tx=TransactionImple )
This response to your original email
Subject:RE:Task Assignment – Process: Test/Email_Test. Task 76 has been assigned to you.
Date Sent:Thursday, October 24, 2011 1:17 PM
Body:accept
DO-NOT-DELETE: MTMhMzE0ITMyOA==!
Attachments:
In log appeared this following error:
Caused by: ALC-DSC-215-000: com.adobe.idp.dsc.DSCRuntimeException: None of the Auth Provider could authenticate the user. Authentication Failed
at com.adobe.livecycle.notification.TaskNotificationServiceImpl.processEmailComplete(TaskNot ificationServiceImpl.java:1157)
Can you me please? I have no idea what to do to succesfully complete task via email endpoint. Thanks
Jan PetrlaHi Diana, thanks for your reply.
You're probably right about 2 different error messages.
To the 1st one: I'm sure that status task is Assigned (to me). I received an email and I also reply on that email.
To error log: I found out that error log appears when I enable email endpoint on Complete Task service. But I managed to solve this problem. I set wrong user. Now I have here the same user as is written in login-config.xml so log seems to be ok.
So I created new task and tried to complete it via email. Now I receive email with another error:
LiveCycle ES has tried to process your request and encountered the following error:
com.adobe.idp.dsc.provider.service.email.impl.EmailProviderException: Error getting user context
This response to your original email
Subject:RE:Task Assignment - Process: WorkFlowClient/Test. Task 92 has been assigned to you.
Date Sent:Thursday, October 27, 2011 3:05 PM
Body:Complete
DO-NOT-DELETE: MTIxMSExNjAzITIwMTE=!
Attachments:
And to the last point: email endpoint is set up with TestPOP3@mydomain and user receiving email has jpetrla@mydomain. I use Lotus Notes as email client, I tried another account with gmail, but the result was same.
Now I really don't know to do...
Jan -
Problem with remove task from schedule in PWA
In our environment problem with remove task from schedule by PWA.
Problem is only when I want to remove few task in the same time, but the operation one by one is correct.
In my opinion problem is with calculation schedule after remove tasks, column ID include wrong value it means that Number ID does not generate in the correct order same of numer
disappear. Click Calculate button on ribbon causes problem with finshed operation and save project.
Problem occurs only machine with IE 11.0 browser without compability mode, on other machine for example on the same project with IE 8,9,10 everything is correct.
Problem appeared recently, earlier everything was OK.
Txn, Dariusz MoczyńskiHi Darius,
I'm a bit confused. You are now talking about 2 issues.
For the first one, you cannot edit anymore tasks in PWA, with any browser versions? Is it happenonog for any users on any projects? Try the following solutions publish the project from Project Pro and see if it helps. Press CTRL F5 to delete IE cache. Ensure
that your PWA URL is added to the trusted site and/or compatibility sites. Check for the ULS logs or javascript errors.
For the second issue, please refer to my previous reply, this obviously cannot be considered as a bug since it is happening with a non supported browser version and working properly on supported versions of IE.
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller | -
Hello all,
we're working with Oracle BPEL Process Manager 10.1.2 (JBoss 3.2.6) on Windows XP (jdk 1.4.2_03).
I've successfully run many examples provided with this distribution (e.g LoanFlowPlus demo).
However when we try to build a BPEL process with user tasks defined, we are able to launch task, but when we complete such tasks nothing happens, and onTaskResult method is never called.
This is the code we use to complete a task (Task are completed from web pages):
String _taskId = request.getParameter("TaskId");
IWorklistService worklist = (IWorklistService) locator.lookupService(IWorklistService.SERVICENAME);
ITask task = worklist.lookupTask(_taskId);
// getResponse returns a String
_task.setConclusion(getResponse());
// getAttachment returns a XML Document
_task.setAttachment(getAttachment());
worklist.completeTask(task);
After these sentences are performed such task is not returned when _worklist.listTasksByAssignee("[email protected]") is performed, but onTaskResult is never called. No error messages are shown.
Any idea?
Thanks.
JaviI've found a possible cause for this weird problem.
It only happens when completeTask is called and somebody has the flow view page on the BPEL Console open.
If nobody is browsing through the BPELConsole web environment task are completed successfully...
¿? -
Problem with clientgen task in weblogic 9.0
hi,
While developing webservices for our project, we used the clientgen ant task for generating the artifacts on the client side. I'm getting trouble in returning a collection of objects (list, vector) from the server to the client. When i try to do so, the clientgen task tries to create a java.util package on the client side in which it creates a List class which basically contains an object array with getter-setter. What i want is for the sun java collections classes to be used instead. The above problem applies to both user-defined as well as built-in objects i.e. say a list of objects of type T or a list of Strings. If someone, has any pointers regarding the same plz help...
tia,
cyrilTry limiting the length of the session id.
This is in either the weblogic.xml/web.xml
files. You can get the dtd in the 6.0 doc.
"Thierry Cools" <[email protected]> wrote:
>Hi I have a problem with the session id that is generated in tha address bar
>of my brower
>When I start my application the following link appears
>
>http://127.0.0.1:7001/ebpp_beans/enterLogonInformation.do;jsessionid=Olw9VMc
>0I1Z52YMgycyD23c8L4Ch2FurHLwbV2WhZw731dR3mBtJ|8186718416288373359/-140823374
>1/7001/7002
>
>It seems that Weblogic 6.0 generates '/' characters in the session id.
>This has for consequences that the servlet engine is taking the session id
>in its context path, so that none of my links are working anymore.
>
>Could someone give me a clue to solve this problem
>Thanks,
>Thierry
>
>--
>
>Thierry Cools
>
>Senior Java Developer
>S1 Brussels
>Kleine Kloosterstraat, 23
>1932 st. Stevens-Woluwe
>Belgium
>Tel : +32 2 200 43 82
>Email : [email protected]
>
>
>
-
Problems with Assign Task operation
I'm having a problem with the Assign Task operation. When I export an application of the LiveCycle ES2 environment and import into another environment LiveCycle ES2, my process get stalled in the all Assign Task operations, and the only way to solve the problem I found is to redo all the Assign Task operations. But in an application with many Assign Task operations, this solution becomes very complicated.
Anyone who has encountered this problem could help me better to fix it?
Thanks for any help!
Following is the error message:
StackTrace:
java.lang.NullPointerException
at com.adobe.idp.taskmanager.dsc.util.UserManagerUtils.getUserOID(UserManagerUtils.java:959)
at com.adobe.idp.taskmanager.dsc.userservicev2.UserServiceImpl.createTaskFromDialogPropertie s(UserServiceImpl.java:941)
at com.adobe.idp.taskmanager.dsc.userservicev2.UserServiceImpl.createLongLivedTask(UserServi ceImpl.java:1631)
at com.adobe.idp.taskmanager.dsc.userservicev2.UserServiceImpl.createLongLivedTask(UserServi ceImpl.java:1506)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.adobe.idp.dsc.component.impl.DefaultPOJOInvokerImpl.invoke(DefaultPOJOInvokerImpl.jav a:118)
at com.adobe.idp.dsc.interceptor.impl.InvocationInterceptor.intercept(InvocationInterceptor. java:140)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
at com.adobe.idp.dsc.interceptor.impl.DocumentPassivationInterceptor.intercept(DocumentPassi vationInterceptor.java:53)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
at com.adobe.idp.dsc.transaction.interceptor.TransactionInterceptor$1.doInTransaction(Transa ctionInterceptor.java:74)
at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionCMTAdapterBean.execute(EjbTr ansactionCMTAdapterBean.java:357)
at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionCMTAdapterBean.doSupports(Ej bTransactionCMTAdapterBean.java:227)
at sun.reflect.GeneratedMethodAccessor643.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.jboss.invocation.Invocation.performCall(Invocation.java:359)
at org.jboss.ejb.StatelessSessionContainer$ContainerInterceptor.invoke(StatelessSessionConta iner.java:237)
at org.jboss.resource.connectionmanager.CachedConnectionInterceptor.invoke(CachedConnectionI nterceptor.java:158)
at org.jboss.ejb.plugins.StatelessSessionInstanceInterceptor.invoke(StatelessSessionInstance Interceptor.java:169)
at org.jboss.ejb.plugins.CallValidationInterceptor.invoke(CallValidationInterceptor.java:63)
at org.jboss.ejb.plugins.AbstractTxInterceptor.invokeNext(AbstractTxInterceptor.java:121)
at org.jboss.ejb.plugins.TxInterceptorCMT.runWithTransactions(TxInterceptorCMT.java:378)
at org.jboss.ejb.plugins.TxInterceptorCMT.invoke(TxInterceptorCMT.java:181)
at org.jboss.ejb.plugins.SecurityInterceptor.invoke(SecurityInterceptor.java:168)
at org.jboss.ejb.plugins.LogInterceptor.invoke(LogInterceptor.java:205)
at org.jboss.ejb.plugins.ProxyFactoryFinderInterceptor.invoke(ProxyFactoryFinderInterceptor. java:138)
at org.jboss.ejb.SessionContainer.internalInvoke(SessionContainer.java:648)
at org.jboss.ejb.Container.invoke(Container.java:960)
at org.jboss.ejb.plugins.local.BaseLocalProxyFactory.invoke(BaseLocalProxyFactory.java:430)
at org.jboss.ejb.plugins.local.StatelessSessionProxy.invoke(StatelessSessionProxy.java:103)
at $Proxy378.doSupports(Unknown Source)
at com.adobe.idp.dsc.transaction.impl.ejb.EjbTransactionProvider.execute(EjbTransactionProvi der.java:104)
at com.adobe.idp.dsc.transaction.interceptor.TransactionInterceptor.intercept(TransactionInt erceptor.java:72)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
at com.adobe.idp.dsc.interceptor.impl.InvocationStrategyInterceptor.intercept(InvocationStra tegyInterceptor.java:55)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
at com.adobe.idp.dsc.interceptor.impl.InvalidStateInterceptor.intercept(InvalidStateIntercep tor.java:37)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
at com.adobe.idp.dsc.interceptor.impl.AuthorizationInterceptor.intercept(AuthorizationInterc eptor.java:165)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
at com.adobe.idp.dsc.interceptor.impl.JMXInterceptor.intercept(JMXInterceptor.java:48)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
at com.adobe.idp.dsc.engine.impl.ServiceEngineImpl.invoke(ServiceEngineImpl.java:121)
at com.adobe.idp.dsc.routing.Router.routeRequest(Router.java:129)
at com.adobe.idp.dsc.provider.impl.base.AbstractMessageReceiver.routeMessage(AbstractMessage Receiver.java:93)
at com.adobe.idp.dsc.provider.impl.vm.VMMessageDispatcher.doSend(VMMessageDispatcher.java:22 5)
at com.adobe.idp.dsc.provider.impl.base.AbstractMessageDispatcher.send(AbstractMessageDispat cher.java:66)
at com.adobe.idp.dsc.clientsdk.ServiceClient.invoke(ServiceClient.java:208)
at com.adobe.idp.jobmanager.execution.workadapter.AbstractExecutableJob.invokeRequest(Abstra ctExecutableJob.java:127)
at com.adobe.idp.jobmanager.execution.workadapter.PersistentExecutableJob.execute(Persistent ExecutableJob.java:60)
at com.adobe.idp.dsc.workmanager.adapter.UnManagedAsynchronousWorkAdapter.run(UnManagedAsync hronousWorkAdapter.java:39)
at org.jboss.resource.work.WorkWrapper.execute(WorkWrapper.java:204)
at org.jboss.util.threadpool.BasicTaskWrapper.run(BasicTaskWrapper.java:275)
at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:743)
at java.lang.Thread.run(Thread.java:619)Hi javier,
1. record = <DATOS>
If possible, try to use
a pre-defined strucure of type P9069
for putting data into this infotype.
2. Avoid using field symbols.
3. Try with P9069
regards,
amit m. -
Problem with Human Task(hw_services)
Hi,
We are facing a problem using the Human Task in a BPEL process.
When we add a human task and for any BPEL process in Jdeveloper and tried to add a new user to it no Realm is getting selected.
And when we try to lookup for users getting an error message
' Identity Service Client Error
BPMIdentityService has client error
Contact oracle support if error is not fixable'
We're using the default settings for security on dev server.
Our SOA suite configured on HP-UX machine and using Oracle XE DB which is on Windows XP machine.
This is working fine with other configurations working on Windows machines.
And other interesting thing we found is,When we open the em console we didn't find any webservices unders 'hw_services'
( IdentityConfigServicePort,IdentityServicePort IdentityService, TaskMetadataServicePort TaskMetadataService,TaskQueryServicePort TaskQueryService,TaskServicePort are not there)
seems our hw_services are not configured properly. Everything else is working fine.
Please help advice as it is very urgent...
Thanks in advance...
-SriHi Marc,
Thank you very much for the reply.
WorkList Application's URL mentioned in the wf_config.xml is working fine and we are getting the login page.
But the SOAP endpoints mentioned in wf_client_config.xml for other webservices like Identity Services are not working. Getting HTTP 404 Not Found error message
We didn't face any other problems with the config.
Please help advice whether any other details are needed to solve this issue....
Thanks again...
-Sri -
Hi people,
After I upgraded my curve 8900 to 5.0 anything (tried two so far) .461 & .411 I noticed that my tasks from Outlook that are recurring when I mark them completed the next occurance has a strange reminder time.
i.e.
I have a recurring task Morning Vitamins set to be reminded daily at 8:00 AM. When I complete the task in version 4 the next task was created no problems. However, with version 5 when I complete the task, the next task has a reminder time of 1:00 AM sometimes 2:00 AM. I can't figure out the rhyme or reason of this.
I have tried several battery pulls no change still same wierd reminder time.
Has anyone else noticed this? Anyone have any ideas to fix this?Hello Robin, and thanks for the answer.
The QA team is testing with a special account created to this purpose. We the development team are viewing these tasks wuth that account without a problem, that's the odd thing. We've checked the IE version, the security configuration of IE and everything matches. The problem began when we changed from VC to WebDynpro.
Regards -
Hi all,
At this moment I'm testing a cartridge deployed in OSM7 that is installed in Solaris Spark. The cartridge contains processes that include Automated Tasks with XQuery Sender Automator Internal to send a message to a queue JMS. In some of the Automated Task, when try to execute de XQuery Sender doesn't occur anything, the message is not putted in the queue and in the log doesn't appear any error.
I created 3 orders in OSM, and checking all the WebLogic console I can see the next:
1. In the worklist of OSM appear the 3 orders with column "State=Received" and doesn't have anything in the column "User", (I think this mean that the automator has not started).
2. In the WebLogic console -> JMSModules -> "oms_jms_module" -> "oms_events" ->Monitoring, I can see 3 messages "Pending" that correspond to each order created.
3. The Orchestration Plan "Seen in the osmwebui" is OK.
Note1: When I test the same cartridge deployed in OSM7 installed in Windows I don't have the problem.
Note2: This doesn't occur always, sometimes the JMS Message is putted in the queue and the flow of the order continues in the right way.
Thanks a lot for any suggestion.
Edited by: user2926753 on 17-nov-2011 9:24Ramiro;
From what you are describing, it sounds as if the automation plugin is not deployed - hence the reason why the task you are intending to automate just stays in the received state.
I would suggest you start by undeploying and then redeploying your cartridge.
Of course this doesn't explain your Note2, but worth trying the above in any case.
Can you tell me how you are submitting the order and what release of OSM you are on?
Thanks,
Brian. -
Problems with Complete Bi JSP Application.
Hello.
I can see perfectly my presentation, it connect with database perfectly, but when i creacte a complete bi Jsp Application to incorporate this Bi Bean Object , i have this problem.
It generate a exception in MetadataManager and cannot connect with database.
Could anybody help me?
Thanks a lot.
BIB-18007 Se ha producido una excepción de MetadataManager. BIB-10100 No se puede conectar a la base de datos. (Motivo: Consulte el error oracle.i1) BIB-16601 No se puede conectar a la base de datos. (Motivo: Consulte el error oracle.i1) oracle.i18n.util.builder.UnicodeMapChar oracle.i18n.util.builder.UnicodeMapChar
Rastreo de pila
javax.servlet.jsp.JspException: BIB-18007 Se ha producido una excepción de MetadataManager.
BIB-10100 No se puede conectar a la base de datos. (Motivo: Consulte el error oracle.i1)
BIB-16601 No se puede conectar a la base de datos. (Motivo: Consulte el error oracle.i1)
oracle.i18n.util.builder.UnicodeMapChar
oracle.i18n.util.builder.UnicodeMapChar
at oracle.dss.addins.jspTags.PresentationTag.doStartTag(PresentationTag.java:293)
at Analyze1.jspService(Analyze1.jsp:12)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:347)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:509)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:413)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(Unknown Source)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:649)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:322)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:790)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:270)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
at java.lang.Thread.run(Thread.java:534)This usually implies the JSP application cannot connect to the database listed in your runtime configuration setting of your BIDesigner.
In the BIDesigner check to see how the runtime connection is configured. There are two options:
a) Use design settings - this will use the local catalog in your JDev project
b) you can create a specify a BIDesigner connection and a corresponding BI Catalog connection
If you are using option (b) then make sure your presentation is copied to the BI Catalog. Then test all the connections including the catalog connection listed on the runtime settings tab of the BIDesigner.
Hope this helps
Business Intelligence Beans Product Management Team
Oracle Corporation -
Problem with Script Task formatting excel
Hi Experts,
I am creating a package and using Script task to format one excel dimension file, now the problem is if I execute the package from BIDS designer with static values then the package executes fine with excel file formatted perfectly fine but if I execute same package in BPC via Data manager with values used from variables it gives error on script task message:
"Description = System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.Runtime.InteropServices.COMException (0x800A03EC): Microsoft Office Excel cannot access the file 'E:\PC_MS\Data\Webfolders\CDNPLAN\AdminApp\Stage\Employee.xls'. There are several possible reasons:
u2022 The file name or path does not exist.
u2022 The file is being used by another program.
u2022 The workbook you are trying to save has the same name as a currently open workbook.
at Microsoft.VisualBasic.CompilerServices.LateBinding.LateGet(Object o, Type objType, String name, Object[] args, String[] paramnames, Boolean[] CopyBack)
at Microsoft.VisualBasic.CompilerServices.NewLateBinding.LateGet(Object Instance, Type Type, String MemberName, Object[] Arguments, String[] ArgumentNames, Type[] TypeArguments, Boolean[] CopyBack)
at ScriptTask_2921447fa19c44dfae73d5370828ba94.vbproj.ScriptMain.Main()
Now to crosscheck I commented the dynamic variables from the code and used same static values with Data manager as they are in BIDS but it didn't help, please find the code below and help me in solving this problem or just give me some clue to come out if this:
Thanks & Regards,
Rohit
Code
Public Sub Main()
' Add your code here
'Dim FileName As String = Dts.Variables("MYWEBFOLDERS").Value & Dts.Variables("MYAPPSET").Value & "\AdminApp\Stage\" & Dts.Variables("MYDIMNAME").Value & ".xls" This I commented as it was using dynamic variables
Dim FileName As String = "E:\PC_MS\Data\Webfolders\CDNPLAN\AdminApp\Stage\Employee.xls"
Dim WB As Object ' Workbook
Dim WS As Object 'Worksheet
Dim W As Object 'Window
Dim XL As Object 'Application
XL = CreateObject("Excel.Application")
XL.DisplayAlerts = False
' Open the workbook
WB = XL.Workbooks.Open(FileName)
' WB = GetObject(FileName)
' XL = WB.Parent
' XL.DisplayAlerts = False
WS = WB.Worksheets(1)
W = WB.Windows(WB.Name)
' Change the name of the worksheet to MEMBERS
WS.Name = "MEMBERS"
' Set up the split and freeze the panes
W.SplitRow = 1
W.SplitColumn = 1
W.Split = True
W.FreezePanes = True
' Make it visible
W.Visible = True
' Replace *ID column header with ID
Dim Row1 As Object
Row1 = WS.UsedRange.Rows("1:1")
Dim I As Integer
For I = 1 To Row1.Columns.Count
If Row1.Cells(I, 1).Value = "*ID" Then
Row1.Cells(I, 1).value = "ID"
Exit For
End If
Next
' Paste Values
WS.UsedRange.NumberFormat = "@"
WS.UsedRange.Value = WS.UsedRange.Value
' Change the font of everything to Arial,9
With WS.Cells.Font
.Name = "Arial"
.Size = 9
End With
' Format the top row to be bold and orange
With WS.Rows("1:1")
.Font.Bold = True
.Interior.ColorIndex = 44 'orange
End With
' Auto-fit all the columns
WS.Cells.EntireColumn.AutoFit()
' Convert to Excel format
Const xlNormal = -4143
WB.Parent.DisplayAlerts = False
WB.SaveAs(FileName:=FileName, FileFormat:=xlNormal, Password:="", WriteResPassword:="", ReadOnlyRecommended:=False, CreateBackup:=False)
' Close and save changes
WS = Nothing
WB.Close()
W = Nothing
' Quit Excel
XL.Quit()
XL = Nothing
Dts.TaskResult = ScriptResults.Success
End SubHi,
If you do not define GLOBAL VARIABLE in your BPC package and BIDS, why don't you try to have it? you should specify the webfolder and file name in advanced script, then you also need to create global variable as text type in BIDS.
I saw many cases BPC does not pass the dynamic variable to BIDS, therefore I changed the type of variable as the Global variable and it works for me.
Regards,
YH Seo -
Problem with completing reminders
I have a reminders calendar set up using icloud that syncs to my Mac Mini, MacBook Air, ipad, and iphone. When I create a reminder on either my mini or Air, I am unable to set up the reminder as a repeating reminder. When I edit the reminder on my ipad or iphone, I can make the reminder a repeating one. The change then syncs back to the mini and air. But I am unable to complete or check off the reminder on the mini or air, although I can check it off on my iphone or ipad.
Anyone have any ideas about what is going on?
Thanks,
BramStop TimeMachine before you start converting your movie.
If that doesn't help, delete all titles made with the organic-theme.
if that doesn't help, delete all titles.
Thousands of users do have that problem, but Apple seems to be asleep... -
Hi we are looking at using MDT to deploy to around 1000s machines across the school and have been tasked with testing it. I have got our image captured and deploy-able but not quite how we need it yet.
We want to be able to deploy the image to a system that currently as windows installed but also format the drive in the process. I have setup a domain account that maps the deployment share and runs the vbs script. That all works fine the machine reboots
in to the WIN PE formats the drive and then errors out saying no drive to install to check drivers.
The other way we want to install is by network boot I cant test this yet. To get round it I have uploaded the boot wim on to a usb stick. When I boot from that the task runs through start to finish no issue. Formats the drive installs runs through and I
end up with a fully installed machine ready for naming and domain joining.
I can't understand why when they both run the exact same task with both boot wim being exactly the same that one works and one doesn't.
Any advice much apprenticed Andrew HoyThat's because you're not allowing MDT to format the device. When you omit the MDT diskpart solution, you often run into OS target drive issues because you're not configuring the proper MDT variables with target partition information. ZTIDiskpart along
with ZTIGather handle this information. I recommend you create a format step in your image sequence and use the MDT construct to format the devices. This will handle all of the variable dependencies that MDT relies on for deployment. Good luck.
Ryan -
I have a problem with a Task school
i have a problem https://onedrive.live.com/redir?resid=16106437D5EF76FF%21107
I want to set the start button so that when you click exchange positions, Please Help Me!!!var printArray:Array = [];
var mcs:Array = [n1, n2, n3, n4, n5, n6, n7, n8, n9, n9,n10];
for(var n:int = 1; n <= 28; n++)
var randNo:int = int(Math.random() * 10);
printArray.push(randNo);
for(var p:int = 0; p < printArray.length; p++)
trace(printArray[p]);
var mc:MovieClip = new mcs[printArray[p]];
addChild(mc);
I am very confused with the code, help please! need to work -
I have a problem with karnel task.
I have the option frm the you tube of removing a folder from the resourses but the file with the name of my model is not there file name is "imac13.1"
Do you have any suggestions. I'm sure it is not normal. my mac was much faster before and now it takes about a minute to open safari.
Kernal task takes lot of my memory around 900MB.
Thank you for help.EtreCheck version: 1.9.11 (43) - report generated 10 June 2014 22:42:02 BST
Hardware Information:
iMac (21.5-inch, Late 2012)
iMac - model: iMac13,1
1 2.7 GHz Intel Core i5 CPU: 4 cores
8 GB RAM
Video Information:
NVIDIA GeForce GT 640M - VRAM: 512 MB
System Software:
OS X 10.9.3 (13D65) - Uptime: 0 days 4:18:50
Disk Information:
APPLE HDD HTS541010A9E662 disk0 : (1 TB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 999.35 GB (682.13 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
USB Information:
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. FaceTime HD Camera (Built-in)
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Gatekeeper:
Mac App Store and identified developers
Kernel Extensions:
[not loaded] arcana.PRAM (6.1) Support
[not loaded] com.driver.JRDMassStorageDriverType05 (1.0.0) Support
[not loaded] com.driver.JRDUSBModemCDC (1.0.0) Support
[not loaded] com.driver.JRDUSBModemData (1.0.0) Support
[not loaded] com.driver.JRDUSBModemData_MO (1.0.0) Support
Startup Items:
ArcanaStartupSound: Path: /Library/StartupItems/ArcanaStartupSound
Parallels: Path: /Library/StartupItems/Parallels
Launch Daemons:
[loaded] com.adobe.fpsaud.plist Support
[invalid] com.oracle.java.Helper-Tool.plist
[running] com.teamviewer.teamviewer_service.plist Support
[running] com.trusteer.rooks.rooksd.plist Support
Launch Agents:
[invalid] com.oracle.java.Java-Updater.plist
[running] com.teamviewer.teamviewer.plist Support
[running] com.teamviewer.teamviewer_desktop.plist Support
[running] com.trusteer.rapport.rapportd.plist Support
User Launch Agents:
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.google.keystone.agent.plist Support
User Login Items:
Dropbox
AdobeResourceSynchronizer
CrossOver CD Helper
Internet Plug-ins:
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 2.4.4.2 Support
OfficeLiveBrowserPlugin: Version: 12.3.6 Support
NP2020Player: Version: 4.5.2.0 Support
AdobePDFViewerNPAPI: Version: 11.0.07 - SDK 10.6 Support
FlashPlayer-10.6: Version: 13.0.0.214 - SDK 10.6 Support
DivXBrowserPlugin: Version: 1.4 Support
Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
Flash Player: Version: 13.0.0.214 - SDK 10.6 Outdated! Update
QuickTime Plugin: Version: 7.7.3
iPhotoPhotocast: Version: 7.0
webplugin: Version: 1.1.0 - SDK 10.7
AdobePDFViewer: Version: 11.0.07 - SDK 10.6 Support
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins:
CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 Support
Google Earth Web Plug-in: Version: 7.1 Support
3rd Party Preference Panes:
DivX Support
Flash Player Support
Flip4Mac WMV Support
MacFUSE Support
ArcanaStartupSound Support
Trusteer Endpoint Protection Support
Time Machine:
Skip System Files: NO
Mobile backups: OFF
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 930.71 GB Disk used: 295.43 GB
Destinations:
Data [Network] (Last used)
Total size: 2
Total number of backups: 86
Oldest backup: 2013-07-29 22:28:37 +0000
Last backup: 2014-06-10 14:53:06 +0000
Size of backup disk: Adequate
Backup size 2 > (Disk used 295.43 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
9% mds
1% WindowServer
0% Safari
0% fontd
0% dpd
Top Processes by Memory:
410 MB iTunes
393 MB com.apple.WebKit.WebContent
295 MB com.apple.MediaLibraryService
246 MB mds_stores
213 MB Safari
Virtual Memory Information:
2.35 GB Free RAM
4.37 GB Active RAM
324 MB Inactive RAM
987 MB Wired RAM
673 MB Page-ins
0 B Page-outs
Maybe you are looking for
-
Apex_util.prepare_url from PL/SQL (outside APEX)
Hello there, I have to create a job that sends emails with a link to a page with SSP actived and that requires authentification. I've read those threads from Dan and Omar and I wonder if this is still possible in APEX 4.2.1? Re: apex_util.prepare_url
-
Cannot print pdf files with 9.3.1, cannot remove patch
does anyone know how to fix msi problems ? updater says 9.3.1 is more functional than 9.4 what does that mean? does that mean I need to remove 9.3.1 in order to install 9.4 ? All i want out of this is the ability to control what stays and want goes
-
BAPI for clearing vendor invoice
Dear SAP Guru's, I need to make clearing of the invoice made for particular vendors on daily basis, i have tried to look in the forum but i find regarding the posting of vendor invoice but --- My requirement is to schedul
-
Post Author: despec CA Forum: General Hello to the forum once more,I am trying to use a shared variable as a "switch" in a sub report to either turn on/off suppression of a text label and the associated field. If the user selects a "summary" report,
-
Hi There, I can't save my file with this output method. but it works for other programs. Why is that? Thanks, Lei Attachments: Quadrature detection_finite_mean.vi 40 KB