Problems with Complete Bi JSP Application.

Hello.
I can see perfectly my presentation, it connect with database perfectly, but when i creacte a complete bi Jsp Application to incorporate this Bi Bean Object , i have this problem.
It generate a exception in MetadataManager and cannot connect with database.
Could anybody help me?
Thanks a lot.
BIB-18007 Se ha producido una excepciÃ³n de MetadataManager. BIB-10100 No se puede conectar a la base de datos. (Motivo: Consulte el error oracle.i1) BIB-16601 No se puede conectar a la base de datos. (Motivo: Consulte el error oracle.i1) oracle.i18n.util.builder.UnicodeMapChar oracle.i18n.util.builder.UnicodeMapChar
Rastreo de pila
javax.servlet.jsp.JspException: BIB-18007 Se ha producido una excepciÃ³n de MetadataManager.
BIB-10100 No se puede conectar a la base de datos. (Motivo: Consulte el error oracle.i1)
BIB-16601 No se puede conectar a la base de datos. (Motivo: Consulte el error oracle.i1)
oracle.i18n.util.builder.UnicodeMapChar
oracle.i18n.util.builder.UnicodeMapChar
at oracle.dss.addins.jspTags.PresentationTag.doStartTag(PresentationTag.java:293)
at Analyze1.jspService(Analyze1.jsp:12)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:347)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:509)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:413)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(Unknown Source)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:649)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:322)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:790)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:270)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
at java.lang.Thread.run(Thread.java:534)

This usually implies the JSP application cannot connect to the database listed in your runtime configuration setting of your BIDesigner.
In the BIDesigner check to see how the runtime connection is configured. There are two options:
a) Use design settings - this will use the local catalog in your JDev project
b) you can create a specify a BIDesigner connection and a corresponding BI Catalog connection
If you are using option (b) then make sure your presentation is copied to the BI Catalog. Then test all the connections including the catalog connection listed on the runtime settings tab of the BIDesigner.
Hope this helps
Business Intelligence Beans Product Management Team
Oracle Corporation

Similar Messages

Problem with JavaBeans in JSP.IT'S URGENT!!!

Hi, i have problems with JavaBeans in JSP.
In a jsp file( locating in ROOT directory of tomcat 4.0.6 :jakarta-tomcat-4.0.6\webapps\root ) i have this code:
<jsp:useBean id="paramBean" class="licentza.ParamBean" />
<jsp:setProperty name="paramBean"
property="nume"
value='<%= request.getParameter("numeUser") %>' />
where ParamBean it's a "bean" class locating in jakarta-tomcat-4.0.6\webapps\examples\web-inf\classes\licentza (licentza is the package i'm using).
And i get this error:
Generated servlet error:
D:\jakarta-tomcat-4.0.6\work\Standalone\localhost\_\dora\intrare2$jsp.java:67: Class licentza.ParamBean not found.
ParamBean paramBean = null;
What is the problem?Thank you.

Hi,
Put the class file or the package under :jakarta-tomcat-4.0.6\webapps\root\WEB-INF\classes.
Rajesh

I suddenly have this error message on FireFoxthis message pops up: "Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no re

I suddenly encounter this error message from Fire Fox.
Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no read/write restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and fix the problem. If you continue to use this session, you might see incorrect application behaviour when accessing security features.
I uninstalled the browser and download a new version but it does not resolve the issue.
I know my hard disc has ample space. I do NOT know where to find the Profile directory to fix the read restriction box.
== This happened ==
Every time Firefox opened
== After something about security add-on of Norton pop up by itself. ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; MSN Optimized;US)

This link shows things to check - https://support.mozilla.com/kb/Could+not+initialize+the+browser+security+component

New WIN7 System, FFox gives error "Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory" - will not go to any site.

New Windows 7 computer. After installing Firefox, every time I bring it up I get the following message:
"Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no read/write restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and fix the problem. If you continue to use this session, you might see incorrect application behaviour when accessing security features."
Then Firefox comes up, but will not function at all - can enter url address, but will not respond to ANY clicks, so can not go to any site.

This link shows how to fix this - https://support.mozilla.com/kb/Could+not+initialize+the+browser+security+component

This message [Ubuntu repositories or Mozilla download: " There is no Profile folder Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory....

Ubuntu 11.04: I have been getting this message whenever I install Firefox from the repositories and downloading the tar file. I cannot use Firefox! " There is no Profile folder Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no read/write restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and fix the problem. If you continue to use this session, you might see incorrect application behaviour when accessing security features."Firefox does not respond to any addresses or a google search. Indeed it responds to nothing. There is no Profile folder!

Uninstalling Firefox on Linux
* http://kb.mozillazine.org/Uninstalling_Firefox#On_Linux
* http://kb.mozillazine.org/Installation_directory#Linux
* Removing user profile data - http://kb.mozillazine.org/Uninstalling_Firefox#Removing_user_profile_data
After all is done, Restart your system.
Installing Firefox on Linux
* https://support.mozilla.com/en-US/kb/Installing%20Firefox%20on%20Linux
Check and tell if its working.

When I open Firefox the following alert appears: "Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory." There is a solution in the forum but only for Windows based

When I open the application the following alert appears: "Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory." There is a solution on the support site but only for Windows-based Firefox, and I'm a Mac user. I have plenty of room on my hard disk.
== This happened ==
Every time Firefox opened
== Two days ago, for no apparent reason.

In Mac OS X v10.7, the $HOME/Library folder is a hidden folder.
Open Finder and use one of these:
* Go > Go To Folder (Shift-Command-G) and in the dialog type: ~/Library
* Open the "Go" menu and hold down the Option key to make the Library appear
You can also use this command in a Terminal window to remove the hidden flag.
* Mac HD > Applications > Utilities > Terminal
* chflags nohidden ~/Library

Problem with complete task via email

Hello,
I have problem with complete task via email. I found this blog very useful (http://blogs.adobe.com/ADEP/2010/11/how-to-complete-a-task-via-email-using-reply-to-comple te.html), but...
I set up everything as it’s written in blog mentioned above. When a task is assigned to me, I received an email notification with actions (accept, deny). After that I replied with action “accept”. Then I received email with subject “Errors from LiveCycle ES”:
LiveCycle ES has tried to process your request and encountered the following error:
com.adobe.pof.POFRuntimeException: Transaction is not active: tx=TransactionImple ; – nested throwable: (javax.resource.ResourceException: Transaction is not active: tx=TransactionImple )
This response to your original email
Subject:RE:Task Assignment – Process: Test/Email_Test. Task 76 has been assigned to you.
Date Sent:Thursday, October 24, 2011 1:17 PM
Body:accept
DO-NOT-DELETE: MTMhMzE0ITMyOA==!
Attachments:
In log appeared this following error:
Caused by: ALC-DSC-215-000: com.adobe.idp.dsc.DSCRuntimeException: None of the Auth Provider could authenticate the user. Authentication Failed
at com.adobe.livecycle.notification.TaskNotificationServiceImpl.processEmailComplete(TaskNot ificationServiceImpl.java:1157)
Can you me please? I have no idea what to do to succesfully complete task via email endpoint. Thanks
Jan Petrla

Hi Diana, thanks for your reply.
You're probably right about 2 different error messages.
To the 1st one: I'm sure that status task is Assigned (to me). I received an email and I also reply on that email.
To error log: I found out that error log appears when I enable email endpoint on Complete Task service. But I managed to solve this problem. I set wrong user. Now I have here the same user as is written in login-config.xml so log seems to be ok.
So I created new task and tried to complete it via email. Now I receive email with another error:
LiveCycle ES has tried to process your request and encountered the following error:
com.adobe.idp.dsc.provider.service.email.impl.EmailProviderException: Error getting user context
This response to your original email
Subject:RE:Task Assignment - Process: WorkFlowClient/Test. Task 92 has been assigned to you.
Date Sent:Thursday, October 27, 2011 3:05 PM
Body:Complete
DO-NOT-DELETE: MTIxMSExNjAzITIwMTE=!
Attachments:
And to the last point: email endpoint is set up with TestPOP3@mydomain and user receiving email has jpetrla@mydomain. I use Lotus Notes as email client, I tried another account with gmail, but the result was same.
Now I really don't know to do...
Jan

URGENT : Problems with exporting a translated application

Hi ! I have a problem with exporting a translated application. Effectively, I exported both applications (The normal and the translated version). I want now to apply the translation XLIFF. I want to know if it is possible to apply my old XLIFF file. The problem is that I can't select the same ID for my application.
I really have problems!
Anyone can help me ?

When I import the translated version, the translation works a little bit. Effectively, all my reports appear but there is no item that appears.

Problem with ClassCastException in web application

Hello,
          I'm trying to deploy a web application in WLS 5.1 and I'm getting the
          "dreaded" ClassCastException every time when JSP tries to read a bean
          from the request or session. Under my architecture (actually it's just
          the regular "model 2" ) bean is populated by a servlet, set on the
          request and then retrieved by JSP (servlet forwards to JSP). Everything
          work fine when I register servlets in weblogic.properties, but
          ClassCastException is thrown on any attempt to read from the request if
          the same JSPs and servlets are deployed as web application.
          Has anybody come across the same problem?
          Thanks in advance for help.
          Alexander


Hello,
          This is all well and good as a temporary bug, but it's totally unrealistic for
          the future. Two points:
          * The ClassLoader doesn't need to be discarded, it just needs to be cleared.
          * Other servlet engines seem to be able to handle this.
          Hope it's on its way to resolution!
          TDoan wrote:
          > Alexander:
          >
          > I had some problem with ClassCastException, and recently I found out what it
          > was that causing it. I'm sure if this is the same problem you are having,
          > but please read the following paragraph.
          >
          > I cutted this from http://www.weblogic.com/docs51/classdocs/API_servlet.html
          > ClassCastException and HTTP Sessions
          >
          > You might encounter a ClassCastException while developing servlets that use
          > HTTP sessions. This could happen as a result of the following set of events:
          >
          > a.. You store a reference to a custom class, myFoo, in an HTTP session.
          >
          > b.. While in mid-session, you change your servlet (or JSP or JHTML),
          > causing it to be reloaded. In fact, it is necessary for it to be reloaded by
          > a completely new class loader, and the old class loader that had previously
          > loaded it must be discarded.
          >
          > c.. Because your custom class myFoo is also located under the servlet
          > classpath, it too is reloaded by the new class loader.
          >
          > d.. Now, when you retrieve myFoo from the HTTP session, you cast it to the
          > expected type, but you recieve a ClassCastException. The exception is thrown
          > even if class myFoo has not changed. Because it has been loaded by a
          > different class loader, it is regarded by the JVM as incompatible.
          > Note: If you are using session persistence, the class contents must be
          > serialized, and you will not encounter this exception.
          >
          > Here are some suggested work-arounds to this problem:
          >
          > a.. Do not place your class myFoo in the servlet classpath. Instead, place
          > it in the system classpath or the weblogic.class.path, which are accessible
          > by WebLogic Server. The class will not be reloaded when the servlet is
          > modified. This drawback to this solution is that you cannot prototype the
          > myFoo class, because you must restart the server in order to reload the
          > class after it is modified.
          >
          > b.. If you need to prototype the class, you can write a wrapper method
          > within it to store and retrieve its contents to and from the session. You do
          > not access the class directly from the session, but instead call it is
          > wrapper methods to store or populate it is contents from the session. As
          > long as you use standard Java class types to store the class contents, they
          > will not be reloaded when the servlet is reloaded. This approach has
          > performance drawbacks because your wrapper methods would need to set or get
          > multiple name=value pairs for each class's attributes.
          >
          > c.. Another work-around is to catch the ClassCastException, and replace
          > the old class that is stored in the session with a newly instantiated class,
          > or remove it from the session. Unfortunately, you lose the session data that
          > was previously stored in the class, so you must write your application to
          > handle this scenario. This is the easiest solution to the problem-remember
          > that you should not be storing critical information in an HTTP session, but
          > rather storing it in a database.
          > Note: The ClassCastException generally occurs while you are developing
          > your servlets, and should not be an issue in a stable production system. If
          > you are upgrading your system online, you might wish to warn your customer
          > base.
          >
          > Hope it helps,
          > Tin
          >
          > "Alexander Ananiev" <[email protected]> wrote in message
          > news:[email protected]...
          > > Hello,
          > >
          > > I'm trying to deploy a web application in WLS 5.1 and I'm getting the
          > > "dreaded" ClassCastException every time when JSP tries to read a bean
          > > from the request or session. Under my architecture (actually it's just
          > > the regular "model 2" ) bean is populated by a servlet, set on the
          > > request and then retrieved by JSP (servlet forwards to JSP). Everything
          > > work fine when I register servlets in weblogic.properties, but
          > > ClassCastException is thrown on any attempt to read from the request if
          > > the same JSPs and servlets are deployed as web application.
          > > Has anybody come across the same problem?
          > >
          > > Thanks in advance for help.
          > > Alexander
          > >

Problem with Sessions in JSP

Hi,
I am working on a JSP based website, where I am facing problem with sessions. The user is asked to login by providing her id and password. If found correct, a bean is created and populated with all her details and placed in session scope. I plan to use the information stored in the bean on other related pages until she logs out.
<jsp:useBean id="validUser" scope="session" class="UserBean" >
<c:set target="${validUser}" property="userId" value="${fn:trim(dbValues.UserId)}" />
<c:set target="${validUser}" property="userName" value="${fn:trim(dbValues.UserName)}" />
</jsp:useBean>
<c:redirect url="userHome.jsp" /> The user is presented her homepage - 'userHome.jsp', where she can find various links, like 'Update Profile', 'Pay Registration Fees', 'Book Room' etc. The information stored in the bean is available on 'userHome.jsp'page.
<A HREF='userHome.jsp'>Home</A>
<A HREF='editPersonal.jsp'>Update Profile</A>
<A HREF='registrationFee.jsp'>Pay Registration Fees</A>
<A HREF='bookRoom.jsp'>Book Room</A>
<A HREF='logout.jsp'>Logout</A> The problems are:
1. Whenever user clicks on any of the above mentioned links and moves to any page, the bean comes out as null.
<%-- Verify that the user is logged in --%>
<c:if test="${validUser == null}">
<jsp:forward page="loginForm.jsp">
<jsp:param name="origURL" value="${pageContext.request.requestURL}" />
<jsp:param name="errorMsg" value="You must be logged in to access this site." />
</jsp:forward>
</c:if> 2. The URL shows an additional jsessionid, which my client doesn't want to see.
3. On every click on any link, the value of this jsessionid changes.
What I presume, when I am clicking on different links, my session changes, and so I am seeing a different jsessionid. And since session is changing, therefore the bean is not available in a different session.
All this works fine with localhost, problem comes into picture, when I upload my pages to the server.
Puzzled, can anyone help, where am I going wrong? Let me add here, I am new to JSP and hence don't have much resources with me.

There are several ways sessions can be exchanged between the browser and the server in a j2ee web application.
1. The default is through cookies. However when the client does not accept cookies, the server appends the session id to the url.
2. Some servers also facilitate session information exchange using session id in the url even if the client does accept cookies. This is usually ahieved through a setting in some server configuration file.
You will have to find out why the server in your application is appending the session id to the url.
Whatever be the case, the server should be able to look up the session from the incoming request (be it from the session id in the url or a session cookie).
When session information is exchanged through the JSESSIONID in the url, you should ensure that each and every url that goes to the server has this input parameter. To do that all links and form post urls in your servlet/jsp should be treated with a call to encodeURL().
For example, in a jsp
   <a href = "<%=response.encodeURL("/nextJsp.jsp")%>">Click here </a>
or
   <form action = "<%=response.encodeURL("/nextJsp.jsp")%>">
   </form>etc.
ram.

Issues with deploying BC4J/JSP applications on OC4J

To everyone who's been having problems deploying BC4J/JSP applications to OC4J.
We are aware that you're having problems deploying to OC4J, and we're working on them. OC4J was not available in time for us to add support for OC4J deployment to the JDeveloper 3.2.3 release. In addition there are some bugs in the first release of OC4J that have an impact on BC4J applications. This note describes the issues, and how we plan to address them.
Issue 1: Classpath problems
People have been getting "class not found" or "properties file not found" errors when they try to run their JSP. The answer is to make sure that all relevant archives and your JSP's .properties file are in the OC4J classpath - there's a note addressing the .properties file problem at http://technet.oracle.com:89/ubb/Forum99/HTML/000028.html. In general though, setting up the classpath can be tricky.
Issue 2: JSP TAG NOT RELEASED ON END TAG. SAME TAG IS REUSED.
This issue affects JSP pages whose behaviour relies on a tag instance being cleaned up as a result of release() being called.
Your tag will not be released, and subsequent instances of the tag will reuse the first instance, rather than instantiating a new
one.
Issue 3:JSP SCRIPTABLE VARIABLE NULL
A scriptable variable set in a tag cannot be accessed by a scriptlet. For example, this JSP code will throw a
NullPointerException, because the scriptlet cannot access the value of resultRow:
<jbo:Row id="resultRow" action="CURRENT" datasource="customer_vo1" />
<%
session.putValue("FIRSTNAME", resultRow.getAttribute("Firstname").toString());
%>Workaround: Add a line of code at the beginning of the scriptlet to explicitly get the variable's value from the page context, for
example:
<jbo:Row id="resultRow" action="CURRENT" datasource="customer_vo1" />
<%
resultRow = (oracle.jbo.Row)pageContext.findAttribute("resultRow");
session.putValue("FIRSTNAME", resultRow.getAttribute("Firstname").toString());
%>
What we plan to do
To address issue 1, we're currently testing a utility that installs the BC4J runtime libraries to OC4J, and provides a script to start OC4J with the correct classpath. We plan to post this by the end of this week, along with instructions for deploying a BC4J application to OC4J; deployment will be a lot simpler after running the utility.
To address issues 2 and 3, we're working on a second utility that installs BC4J runtime and provides a fix to the JSP compiler. We plan to post this second utility by the end of next week.
We do apologise for the problems you're having; please bear with us as we work on making it easier for you to deploy BC4J applications to OC4J.
Thanks
Blaise

Hi, I have been trying desparately to deploy
a simple example JDeveloper application for months and months.
I HAVE NEVER BEEN SUCCESSFUL IN DEPLOYING ANYTHING.
I don't know much about webservers and I am relying
on the instructions from JDeveloper help and this website.
I have already tried Apache, and WebLogic
because there are instructions in the JDev help.
No luck.
Now I am trying to use OC4J on 9ias because there are instructions.
I have read the instructions about how to install a BC4J
app on OC4J about 25 times, but I can't get this thing to work.
It works fine inside of JDeveloper.
I create a BC4J project using the scott
schema (just the dept and emp tables).
Then I create an empty project for my JSP client.
I choose JSP Application from the web
objects and it connects to my BC4J project.
As I say, when I run it in JDeveloper, there is no problem.
In the instructions for installing BC4J
in OC4J, it first says install JDev 3.2.3 and OC4J.
This is done, and it tested fine.
Then it says to install the deployment software.
No problem.
But when I deploy the app according to the instructions,
it just hangs (like Rick Wang's program did).
The main.jsp page loads and displays correctly,
but when I click on the links to the DeptView.jsp
or EmpView.jsp it just hangs.
Here is the entire batch file I'm using
to start OC4J: cd c:\oracle_9ias\j2ee\home
set CLASSPATH=%CLASSPATH%;c:\oracle_9ias\j2ee\home
set CLASSPATH=%CLASSPATH%;c:\oracle_9ias\j2ee\home\lib
set CLASSPATH=%CLASSPATH%;c:\oracle_9ias\j2ee\home\default-web-app\lib
set CLASSPATH=%CLASSPATH%;c:\oracle_9ias\j2ee\home\classes
set CLASSPATH=%CLASSPATH%;c:\oracle_9ias\j2ee\home\lib\classes12.jar
set CLASSPATH=%CLASSPATH%;c:\oracle_9ias\j2ee\home\lib\xmlparserv2.jar
set CLASSPATH=%CLASSPATH%;c:\oracle_9ias\j2ee\home\lib\jdev-rt.zip
set CLASSPATH=%CLASSPATH%;c:\oracle_9ias\j2ee\home\lib\jbojdbcpatch.zip
set CLASSPATH=%CLASSPATH%;c:\oracle_9ias\j2ee\home\lib\connectionmanager.zip
set CLASSPATH=%CLASSPATH%;c:\oracle_9ias\j2ee\home\lib\jbohtml.zip
set CLASSPATH=%CLASSPATH%;c:\oracle_9ias\j2ee\home\lib\jboimdomains.zip
set CLASSPATH=%CLASSPATH%;c:\oracle_9ias\j2ee\home\lib\ordim817.zip
set CLASSPATH=%CLASSPATH%;c:\oracle_9ias\j2ee\home\lib\ordvir817.zip
set CLASSPATH=%CLASSPATH%;c:\oracle_9ias\j2ee\home\lib\ordhttp.zip
set CLASSPATH=%CLASSPATH%;c:\oracle_9ias\j2ee\home\lib\jbomt.zip
set CLASSPATH=%CLASSPATH%;c:\oracle_9ias\j2ee\home\lib\jbodomorcl.zip
set CLASSPATH=%CLASSPATH%;c:\oracle_9ias\j2ee\home\lib\jboremote.zip
set CLASSPATH=%CLASSPATH%;c:\oracle_9ias\j2ee\home\lib\jndi.jar
set CLASSPATH=%CLASSPATH%;c:\oracle_9ias\j2ee\home\lib\jbodatum12.zip
set CLASSPATH=%CLASSPATH%;c:\oracle_9ias\j2ee\home\lib\al_BC4J.jar
java -cp C:\oracle_9ias\j2ee\home\orion.jar;%CLASSPATH%
com.evermind.server.ApplicationServer
pause
The file al_BC4J.jar contains my application.properties file
and my connections.properties file, as well as my business components.
All of the files referenced in my classpath are
present in my c:\oracle_9ias\j2ee\home\lib directory.
I noticed that Raghu's classpath contains a file called jdev.jar
So does the classpath of another fellow who says
he was successful in deployment (his name is Jeffrey Jackson).
I searched my JDev_3.2.3 for this file and found it nowhere.
I also searched my OC4J home and my 9iAS for this file and
found it nowhere.
It is nowhere on my C:\.
Is this file necessary?
I will also try removing my application.properties file
and my connections.properties file from my BC4J .jar file
and put them in a separate .jar file at the root level (as Raghu did).
However, Jeffery Jackson did not do this and says he was
successfull in deployment.
***DO I NEED TO JAR UP ANY OF MY THE FILES FROM the JSP
FOLDER IN JDevHome\myhtml???***
***or place them in the classpath?***
I have read over all of the discussions at: http://technet.oracle.com:89/ubb/Forum2/HTML/008232.html
and http://technet.oracle.com:89/ubb/Forum99/HTML/000028.html
many, many times.
Can anyone help me?

Problem with Javascript in JSP

Hi Guys,
I have this problem with my JSP page. I am using a javascript function
which calls a function within a bean. The problem that I have is that I get an error when trying to call the following function :
function refDataTypes_onchange()
Vector empNames = DBQuery.getResult();
I get a runtime error at the line Vector empNames = DBQuery.getResult;
Any ideas would be much appreciated.
Below is the whole code:
Thanks in advance
FRank
<%@ page contentType="text/html;charset=WINDOWS-1252"%>
<%@ page import="java.util.*, java.lang.*" %>
<%-- Declare the java bean for the countries to be queried --%>
<jsp:useBean id="DBQuery" class="DBQuery" scope="page" />
<%-- Bean property searchCondition is not set to query countries --%>
<jsp:setProperty name="DBQuery" property="searchCondition" />
<%
Vector empNames = DBQuery.getResult();
%>
<HTML>
<BODY BGCOLOR="GREY">
<SCRIPT LANGUAGE="JavaScript1.1">
function refDataTypes_onchange()
Vector empNames = DBQuery.getResult();
</SCRIPT>
<FORM NAME = form1>
Please enter in the following details
<p>
Reference Type :::====
<select name="refDataTypes" onchange="refDataTypes_onchange()">
<option value ="1"></option>
<% for(Enumeration enum = empNames.elements();enum.hasMoreElements();)
String nextEmpName = (String)enum.nextElement();
%>
<option value =<%=nextEmpName%>><%=nextEmpName%></option>
<%
%>
</select>
<BR>
<BR>
Emp No
<INPUT TYPE="text" NAME=txtAge >
<BR>
<BR>
<INPUT TYPE="button" VALUE="Check Details" NAME=butCheckForm >
</FORM>
</BODY>
</HTML>

Thanks dimadoo
I need my JSP to do the following :
When a user selects a option from a select list. There is a textfield which I want to populate based on the option that thas been selected from the list.
I tried the following :
<% Vector empNames = DBQuery.getResult(); %>
and it does not even go into the bean.
Will this work if I refresh the page?

Problem with layout in Web Application Designer

Hi all,
I am working with the BEx Web Application Designer. Well, I execute a web template in the browser, click on right button and choose enhanced menu, query properties and mark the check box Display Rows as Hierarchy and Expand to and from the list of values (combo-box) choose the last field that can be expanded.
Once all the lines have been expanded and the layout of the template is longer than a page, we look for a line that is not in the first page and contract it. The problem is that when we contract the line, the layout shows the first page, instead of the page where the line had been contracted. I have tried to solve this changing the properties that appear when the template is designed, but I haven´t found the solution. Is there any way so that i can solve it?
Thanks in advance,
Mª del Mar Bonilla.

Bonilla,
Welcome to SDN...
Try this out...
In the Query designer view , right click on the rows structure and select display as hierarchy. In case this option works fine , the behavior pointed out by you could be a possible bug.
Just update the result of what I have mentioned above...
Hope it helps..
Arun
P.S Assigning points is a way fo saying thank you in SDN

Problem with installFolder in air application

hi! happy new year !!! enjoy for 2011!!!
so i have 1 little problem with <installFolder>
i need to install my app in documents directory...
is possible?
i put my path: <installFolder> C:/Documents and Settings/Utente/Documenti\</installFolder>
but nothing . . . why??
help.....

It seems you are doing right thing. But what could possible is , on Siteminder Policy Server, there is Parameter called ACO that will have a definition for Logging off url . Its LogoffURI parameter. Unless it is set , though you clean up the session in browser when user click on logoff url, the session is still available on siteminder policy server cache. Thats why when user access the application url within the same browser window he is getting application pages. So check with siteminder administrator on your end...

Problem with icons in the application bar (Photoshop CS4)

My computer's OS is WinXP Pro SP3.
I just now noticed a problem with all icons in the application bar in PS CS4 (v. 11.0.1).
When I bring mouse over icons (except for zoom level icon), all icons turn into blank (white) boxes.
For "Arrange Documents" bar, when I click on its blank icon, the top two columns are empty but show the the rest of three columns.
Please advise me how to fix this problem. I hope to avoid uninstalling -reinstallinlg. Thanks.

ATI no longer supports your card so I don't think you will see any updated drivers from them to correct your problem. You might want to look into investing in a newer card.
http://support.amd.com/us/gpudownload/windows/Legacy/Pages/radeonaiw_xp.aspx?type=2.4.1&pr oduct=2.4.1.3.23&lang=English

Problems with Complete Bi JSP Application.

Similar Messages

Maybe you are looking for