Problem with Controller Servlet in WAS 4.0

Hello guys,
          I am working on WPS over WAS 4.0. I have an Enterprise application
          with a servlet which acts as a Traffic Controller. Its job is to
          intercept every http request to the Portal Server and make some
          changes to the URL and redirect/forward the changed URL to the Portal
          server. I plan to map the servlet to "/" so as all the requests are
          handled by this servlet. I hope it will work this way.
          So, the user clicks on a URL like http://server_name/meeting, the
          servlet sees a mapping table for /meetinf, constructs a new URL and
          redirects it. I read the /meeting as "pathInfo" variable from the
          request object. Please note that "/" is mapped to the servlet. This
          works fine. But if I give a JSP file instead
          (http://server_name/meeting/m.jsp), it starts looking for the JSP file
          in the Servlet WAR file. So the question is if there's any any other
          way of achieving this effect or is there any way to make all the .jsp
          file requests to go to this servlet instead of being searched in the
          WAR file?
          I would be grateful if someone can put their thoughts over this
          problem.
          Thanks
          Kapil.
          ([email protected])

Sorry to hear that.
As far as I know the campus topology is based on CDP info. And since you see all the links in the CDP tables, so should campus.
I've seen campus getting it wrong a few times, especially when there was some repatching done, but until now, when I delete the devices and re-add these devices, the next data collection gets the links correct.
Cheers,
Michel

Similar Messages

I downloaded IOS6 earlier today and my 4S has died twice, it has gone from 45 to 32% in the last 5 minutes and i have icloud, internet, all apps closed with nothing running at all!! There is a serious problem with ios6, my phone was hot at charging time.

I downloaded IOS6 earlier today and my 4S has died twice, it has gone from 45 to 32% in the last 5 minutes and i have icloud, internet, all apps closed with nothing running at all!! There is a serious problem with ios6, my phone was working hot at chargering time. Apple need to address this asap!!!!

Hi Suzy Q,
I can send and receive calls.
I get "messaging stopped" when doing a lot of texts.
Texts come up "ghosted" meaning they have the text on the bottom and a transparent one overlaid on top. they then become one. But I get the ghosting most of the time when I go into a message from a contact to send a text.
When I go to call logs or text logs, the numbers come up first, and then then the names pop up randomly, meaning not in order down the page, until they are all shown. lots of lag time.
It runs slow.
I have 5 apps on here. I should be able to have a lot of apps on here, and play music, and have files, and...and....and.
I can get online but doing a Google search, when the page with the choices comes up, it is blurred and I have to tap on the screen for it to become clear and readable.
When online and scrolling, it hitches sometimes/lags/gets stuck then unstuck
I get VZWAVS has stopped. (not sure if those are the right letters)
The status bar that is supposed to be gray with the new update, goes back and forth between green--the old os--to gray. And I have found no continuity with when I get green or when I get gray.
I get a black screen on occasion.
sometimes the proximity sensor doesn't work.
sometimes when I have my bluetooth on and have "hands free mode" on, I get the a text message read through the headset and also through the handset.
I soft reboot often--turn it off wait a bit and

Hello. I have problem here can someone plz help. I have usb of 32 gb but i have problem with it while i was trying to partition of it and it fails and my usb disappear from finder and desktop i have tried every possible thing but nothing works .

Hello. I have problem here can someone plz help. I have usb of 32 gb but i have problem with it while i was trying to partition of it and it fails and my usb disappear from finder and desktop i have tried every possible thing but nothing works .

Yea i tried in disk utility and its got faiiled and the partitation has deleted and when i tried to replug the usb msg show up by saying usb not compaitnle. With this mac and take me to disk utility and thanks for replying

HI,had a problem with my iphone4,phone was reset@ Apple store now it will not sync with my itunes.Anyone know what i need to do please

Hi,had a problem with my iphone4, phone was reset at the Apple store BUT now it is not being recognised by my computer. Itunes is up to date & i have tried my usb with my ipod & everything is ok.Any idea what to do next please??

iOS: Device not recognized in iTunes for Windows

Problem with SOAP Servlet

Hi,
I have a SOAP servlet, but It is the fist SOAPServlet as I use.
I think that the vsd that developper of SOAP servlet provide is ok.
But, I do not understand which is the XML that I could provide to it.
It is posible that I have a problem with XML, SCHEMA and SOAP.
Could you help me , I attach the VSD, but I need a tool or a sample file in order to call my SOAP servlet.
<xsd:schema xmlns:xsd="http://schemas.xmlsoap.org/soap/encoding">
    <xsd:complexType name="STD_TRN1_I_PARM_V_TYPE">
      <xsd:sequence>
        <xsd:element name="COD_TX_DI">
            <xsd:simpleType base="xsd:string">
                <maxLength value="00004"/>
            </xsd:simpleType>
        </xsd:element>
        <xsd:element name="ID_INTERNO_TERM_TN">
            <xsd:simpleType base="xsd:string">
                <maxLength value="00008"/>
            </xsd:simpleType>
        </xsd:element>
        <xsd:element name="ID_EMPL_AUT">
            <xsd:simpleType base="xsd:string">
                <maxLength value="00008"/>
            </xsd:simpleType>
        </xsd:element>
        <xsd:element name="NUM_SEC">
            <xsd:simpleType base="xsd:decimal">
                <totalDigits value="00007"/>
                <fractionDigits value="00"/>
            </xsd:simpleType>
        </xsd:element>
        <xsd:element name="COD_TX">
            <xsd:simpleType base="xsd:string">
                <maxLength value="00008"/>
            </xsd:simpleType>
        </xsd:element>
      </xsd:sequence>
    </xsd:complexType>
    <xsd:complexType name="TR_CONS_SALDOS_VISTA_EVT_Y_TYPE">
      <xsd:sequence>
        <xsd:element name="COD_CENT_UO">
            <xsd:simpleType base="xsd:string">
                <maxLength value="00004"/>
            </xsd:simpleType>
        </xsd:element>
        <xsd:element name="NUM_SEC_AC">
            <xsd:simpleType base="xsd:decimal">
                <totalDigits value="00010"/>
                <fractionDigits value="00"/>
            </xsd:simpleType>
        </xsd:element>
        <xsd:element name="COD_NRBE_EN">
            <xsd:simpleType base="xsd:string">
                <maxLength value="00004"/>
            </xsd:simpleType>
        </xsd:element>
      </xsd:sequence>
    </xsd:complexType>
    <xsd:complexType name="STD_TRN1_O_PARM_V_TYPE">
      <xsd:sequence>
        <xsd:element name="HORA_OPRCN" type="xsd:time"/>
        <xsd:element name="FECHA_OPRCN" type="xsd:date"/>
      </xsd:sequence>
    </xsd:complexType>
    <xsd:complexType name="PSV_DISPO_V_TYPE">
      <xsd:sequence>
        <xsd:element name="STD_DEC_15Y2">
            <xsd:simpleType base="xsd:decimal">
                <totalDigits value="00015"/>
                <fractionDigits value="02"/>
            </xsd:simpleType>
        </xsd:element>
      </xsd:sequence>
    </xsd:complexType>
    <xsd:complexType name="PSV_SDO_CONTABLE_V_TYPE">
      <xsd:sequence>
        <xsd:element name="IMP_SDO">
            <xsd:simpleType base="xsd:decimal">
                <totalDigits value="00015"/>
                <fractionDigits value="02"/>
            </xsd:simpleType>
        </xsd:element>
      </xsd:sequence>
    </xsd:complexType>
    <xsd:complexType name="PSV_SDO_RETEN_V_TYPE">
      <xsd:sequence>
        <xsd:element name="IMP_SDO">
            <xsd:simpleType base="xsd:decimal">
                <totalDigits value="00015"/>
                <fractionDigits value="02"/>
            </xsd:simpleType>
        </xsd:element>
      </xsd:sequence>
    </xsd:complexType>
    <xsd:complexType name="PSV_SDO_AUT_V_TYPE">
      <xsd:sequence>
        <xsd:element name="IMP_SDO">
            <xsd:simpleType base="xsd:decimal">
                <totalDigits value="00015"/>
                <fractionDigits value="02"/>
            </xsd:simpleType>
        </xsd:element>
      </xsd:sequence>
    </xsd:complexType>
    <xsd:complexType name="PSV_SDO_INCID_V_TYPE">
      <xsd:sequence>
        <xsd:element name="IMP_SDO">
            <xsd:simpleType base="xsd:decimal">
                <totalDigits value="00015"/>
                <fractionDigits value="02"/>
            </xsd:simpleType>
        </xsd:element>
      </xsd:sequence>
    </xsd:complexType>
    <xsd:complexType name="PSV_BLOQUEOS_V_TYPE">
      <xsd:sequence>
        <xsd:element name="STD_CHAR_01">
            <xsd:simpleType base="xsd:string">
                <maxLength value="00001"/>
            </xsd:simpleType>
        </xsd:element>
      </xsd:sequence>
    </xsd:complexType>
    <xsd:complexType name="PSV_SDO_CONECT_V_TYPE">
      <xsd:sequence>
        <xsd:element name="IMP_SDO">
            <xsd:simpleType base="xsd:decimal">
                <totalDigits value="00015"/>
                <fractionDigits value="02"/>
            </xsd:simpleType>
        </xsd:element>
      </xsd:sequence>
    </xsd:complexType>
    <xsd:complexType name="COD_IDIOMA_V_TYPE">
      <xsd:sequence>
        <xsd:element name="COD_IDIOMA">
            <xsd:simpleType base="xsd:string">
                <maxLength value="00002"/>
            </xsd:simpleType>
        </xsd:element>
      </xsd:sequence>
    </xsd:complexType>
    <xsd:complexType name="PSV_ANOTACIONES_V_TYPE">
      <xsd:sequence>
        <xsd:element name="STD_CHAR_01">
            <xsd:simpleType base="xsd:string">
                <maxLength value="00001"/>
            </xsd:simpleType>
        </xsd:element>
      </xsd:sequence>
    </xsd:complexType>
    <xsd:complexType name="TR_CONS_SALDOS_VISTA_EVT_Z_TYPE">
      <xsd:sequence>
        <xsd:element name="COD_NUMRCO_MONEDA">
            <xsd:simpleType base="xsd:string">
                <maxLength value="00003"/>
            </xsd:simpleType>
        </xsd:element>
        <xsd:element name="PSV_DISPO_V" type="PSV_DISPO_V_TYPE"/>
        <xsd:element name="PSV_SDO_CONTABLE_V" type="PSV_SDO_CONTABLE_V_TYPE"/>
        <xsd:element name="PSV_SDO_RETEN_V" type="PSV_SDO_RETEN_V_TYPE"/>
        <xsd:element name="PSV_SDO_AUT_V" type="PSV_SDO_AUT_V_TYPE"/>
        <xsd:element name="PSV_SDO_INCID_V" type="PSV_SDO_INCID_V_TYPE"/>
        <xsd:element name="PSV_BLOQUEOS_V" type="PSV_BLOQUEOS_V_TYPE"/>
        <xsd:element name="PSV_SDO_CONECT_V" type="PSV_SDO_CONECT_V_TYPE"/>
        <xsd:element name="COD_CSB_OF">
            <xsd:simpleType base="xsd:string">
                <maxLength value="00004"/>
            </xsd:simpleType>
        </xsd:element>
        <xsd:element name="NOMB_50">
            <xsd:simpleType base="xsd:string">
                <maxLength value="00050"/>
            </xsd:simpleType>
        </xsd:element>
        <xsd:element name="COD_INTERNO_UO">
            <xsd:simpleType base="xsd:string">
                <maxLength value="00004"/>
            </xsd:simpleType>
        </xsd:element>
        <xsd:element name="COD_IDIOMA_V" type="COD_IDIOMA_V_TYPE"/>
        <xsd:element name="PSV_ANOTACIONES_V" type="PSV_ANOTACIONES_V_TYPE"/>
      </xsd:sequence>
    </xsd:complexType>
    <xsd:complexType name="STD_TRN1_MSJ_PARM_V_TYPE">
      <xsd:sequence>
        <xsd:element name="TEXT_ARG1">
            <xsd:simpleType base="xsd:string">
                <maxLength value="00018"/>
            </xsd:simpleType>
        </xsd:element>
        <xsd:element name="TEXT_CODE" type="xsd:int"/>
      </xsd:sequence>
    </xsd:complexType>
<xsd:complexType name="TR_CONS_SALDOS_VISTA_TRN1">
    <xsd:complexType name="TR_CONS_SALDOS_VISTA_TRN1_O_TYPE">
      <xsd:sequence>
        <xsd:element name="RTRN_CD" type="xsd:int"/>
        <xsd:element name="STD_TRN1_O_PARM_V" type="STD_TRN1_O_PARM_V_TYPE"/>
        <xsd:element name="TR_CONS_SALDOS_VISTA_EVT_Z" type="TR_CONS_SALDOS_VISTA_EVT_Z_TYPE"/>
        <xsd:complexType name="STD_TRN1_MSJ_PARM_V_OCCURS">
            <xsd:element name="STD_TRN1_MSJ_PARM_V" type="STD_TRN1_MSJ_PARM_V_TYPE" maxOccurs="000005"/>
        </xsd:complexType>
      </xsd:sequence>
    </xsd:complexType>
    <xsd:complexType name="TR_CONS_SALDOS_VISTA_TRN1_I_TYPE">
      <xsd:sequence>
        <xsd:element name="STD_TRN1_I_PARM_V" type="STD_TRN1_I_PARM_V_TYPE"/>
        <xsd:element name="TR_CONS_SALDOS_VISTA_EVT_Y" type="TR_CONS_SALDOS_VISTA_EVT_Y_TYPE"/>
      </xsd:sequence>
    </xsd:complexType>
</xsd:complexType>
</xsd:schema>Thanks you

Hi,
I have a SOAP servlet, but It is the fist SOAPServlet as I use.
I think that the vsd that developper of SOAP servlet provide is ok.
But, I do not understand which is the XML that I could provide to it.
It is posible that I have a problem with XML, SCHEMA and SOAP.
Could you help me , I attach the VSD, but I need a tool or a sample file in order to call my SOAP servlet.
<xsd:schema xmlns:xsd="http://schemas.xmlsoap.org/soap/encoding">
    <xsd:complexType name="STD_TRN1_I_PARM_V_TYPE">
      <xsd:sequence>
        <xsd:element name="COD_TX_DI">
            <xsd:simpleType base="xsd:string">
                <maxLength value="00004"/>
            </xsd:simpleType>
        </xsd:element>
        <xsd:element name="ID_INTERNO_TERM_TN">
            <xsd:simpleType base="xsd:string">
                <maxLength value="00008"/>
            </xsd:simpleType>
        </xsd:element>
        <xsd:element name="ID_EMPL_AUT">
            <xsd:simpleType base="xsd:string">
                <maxLength value="00008"/>
            </xsd:simpleType>
        </xsd:element>
        <xsd:element name="NUM_SEC">
            <xsd:simpleType base="xsd:decimal">
                <totalDigits value="00007"/>
                <fractionDigits value="00"/>
            </xsd:simpleType>
        </xsd:element>
        <xsd:element name="COD_TX">
            <xsd:simpleType base="xsd:string">
                <maxLength value="00008"/>
            </xsd:simpleType>
        </xsd:element>
      </xsd:sequence>
    </xsd:complexType>
    <xsd:complexType name="TR_CONS_SALDOS_VISTA_EVT_Y_TYPE">
      <xsd:sequence>
        <xsd:element name="COD_CENT_UO">
            <xsd:simpleType base="xsd:string">
                <maxLength value="00004"/>
            </xsd:simpleType>
        </xsd:element>
        <xsd:element name="NUM_SEC_AC">
            <xsd:simpleType base="xsd:decimal">
                <totalDigits value="00010"/>
                <fractionDigits value="00"/>
            </xsd:simpleType>
        </xsd:element>
        <xsd:element name="COD_NRBE_EN">
            <xsd:simpleType base="xsd:string">
                <maxLength value="00004"/>
            </xsd:simpleType>
        </xsd:element>
      </xsd:sequence>
    </xsd:complexType>
    <xsd:complexType name="STD_TRN1_O_PARM_V_TYPE">
      <xsd:sequence>
        <xsd:element name="HORA_OPRCN" type="xsd:time"/>
        <xsd:element name="FECHA_OPRCN" type="xsd:date"/>
      </xsd:sequence>
    </xsd:complexType>
    <xsd:complexType name="PSV_DISPO_V_TYPE">
      <xsd:sequence>
        <xsd:element name="STD_DEC_15Y2">
            <xsd:simpleType base="xsd:decimal">
                <totalDigits value="00015"/>
                <fractionDigits value="02"/>
            </xsd:simpleType>
        </xsd:element>
      </xsd:sequence>
    </xsd:complexType>
    <xsd:complexType name="PSV_SDO_CONTABLE_V_TYPE">
      <xsd:sequence>
        <xsd:element name="IMP_SDO">
            <xsd:simpleType base="xsd:decimal">
                <totalDigits value="00015"/>
                <fractionDigits value="02"/>
            </xsd:simpleType>
        </xsd:element>
      </xsd:sequence>
    </xsd:complexType>
    <xsd:complexType name="PSV_SDO_RETEN_V_TYPE">
      <xsd:sequence>
        <xsd:element name="IMP_SDO">
            <xsd:simpleType base="xsd:decimal">
                <totalDigits value="00015"/>
                <fractionDigits value="02"/>
            </xsd:simpleType>
        </xsd:element>
      </xsd:sequence>
    </xsd:complexType>
    <xsd:complexType name="PSV_SDO_AUT_V_TYPE">
      <xsd:sequence>
        <xsd:element name="IMP_SDO">
            <xsd:simpleType base="xsd:decimal">
                <totalDigits value="00015"/>
                <fractionDigits value="02"/>
            </xsd:simpleType>
        </xsd:element>
      </xsd:sequence>
    </xsd:complexType>
    <xsd:complexType name="PSV_SDO_INCID_V_TYPE">
      <xsd:sequence>
        <xsd:element name="IMP_SDO">
            <xsd:simpleType base="xsd:decimal">
                <totalDigits value="00015"/>
                <fractionDigits value="02"/>
            </xsd:simpleType>
        </xsd:element>
      </xsd:sequence>
    </xsd:complexType>
    <xsd:complexType name="PSV_BLOQUEOS_V_TYPE">
      <xsd:sequence>
        <xsd:element name="STD_CHAR_01">
            <xsd:simpleType base="xsd:string">
                <maxLength value="00001"/>
            </xsd:simpleType>
        </xsd:element>
      </xsd:sequence>
    </xsd:complexType>
    <xsd:complexType name="PSV_SDO_CONECT_V_TYPE">
      <xsd:sequence>
        <xsd:element name="IMP_SDO">
            <xsd:simpleType base="xsd:decimal">
                <totalDigits value="00015"/>
                <fractionDigits value="02"/>
            </xsd:simpleType>
        </xsd:element>
      </xsd:sequence>
    </xsd:complexType>
    <xsd:complexType name="COD_IDIOMA_V_TYPE">
      <xsd:sequence>
        <xsd:element name="COD_IDIOMA">
            <xsd:simpleType base="xsd:string">
                <maxLength value="00002"/>
            </xsd:simpleType>
        </xsd:element>
      </xsd:sequence>
    </xsd:complexType>
    <xsd:complexType name="PSV_ANOTACIONES_V_TYPE">
      <xsd:sequence>
        <xsd:element name="STD_CHAR_01">
            <xsd:simpleType base="xsd:string">
                <maxLength value="00001"/>
            </xsd:simpleType>
        </xsd:element>
      </xsd:sequence>
    </xsd:complexType>
    <xsd:complexType name="TR_CONS_SALDOS_VISTA_EVT_Z_TYPE">
      <xsd:sequence>
        <xsd:element name="COD_NUMRCO_MONEDA">
            <xsd:simpleType base="xsd:string">
                <maxLength value="00003"/>
            </xsd:simpleType>
        </xsd:element>
        <xsd:element name="PSV_DISPO_V" type="PSV_DISPO_V_TYPE"/>
        <xsd:element name="PSV_SDO_CONTABLE_V" type="PSV_SDO_CONTABLE_V_TYPE"/>
        <xsd:element name="PSV_SDO_RETEN_V" type="PSV_SDO_RETEN_V_TYPE"/>
        <xsd:element name="PSV_SDO_AUT_V" type="PSV_SDO_AUT_V_TYPE"/>
        <xsd:element name="PSV_SDO_INCID_V" type="PSV_SDO_INCID_V_TYPE"/>
        <xsd:element name="PSV_BLOQUEOS_V" type="PSV_BLOQUEOS_V_TYPE"/>
        <xsd:element name="PSV_SDO_CONECT_V" type="PSV_SDO_CONECT_V_TYPE"/>
        <xsd:element name="COD_CSB_OF">
            <xsd:simpleType base="xsd:string">
                <maxLength value="00004"/>
            </xsd:simpleType>
        </xsd:element>
        <xsd:element name="NOMB_50">
            <xsd:simpleType base="xsd:string">
                <maxLength value="00050"/>
            </xsd:simpleType>
        </xsd:element>
        <xsd:element name="COD_INTERNO_UO">
            <xsd:simpleType base="xsd:string">
                <maxLength value="00004"/>
            </xsd:simpleType>
        </xsd:element>
        <xsd:element name="COD_IDIOMA_V" type="COD_IDIOMA_V_TYPE"/>
        <xsd:element name="PSV_ANOTACIONES_V" type="PSV_ANOTACIONES_V_TYPE"/>
      </xsd:sequence>
    </xsd:complexType>
    <xsd:complexType name="STD_TRN1_MSJ_PARM_V_TYPE">
      <xsd:sequence>
        <xsd:element name="TEXT_ARG1">
            <xsd:simpleType base="xsd:string">
                <maxLength value="00018"/>
            </xsd:simpleType>
        </xsd:element>
        <xsd:element name="TEXT_CODE" type="xsd:int"/>
      </xsd:sequence>
    </xsd:complexType>
<xsd:complexType name="TR_CONS_SALDOS_VISTA_TRN1">
    <xsd:complexType name="TR_CONS_SALDOS_VISTA_TRN1_O_TYPE">
      <xsd:sequence>
        <xsd:element name="RTRN_CD" type="xsd:int"/>
        <xsd:element name="STD_TRN1_O_PARM_V" type="STD_TRN1_O_PARM_V_TYPE"/>
        <xsd:element name="TR_CONS_SALDOS_VISTA_EVT_Z" type="TR_CONS_SALDOS_VISTA_EVT_Z_TYPE"/>
        <xsd:complexType name="STD_TRN1_MSJ_PARM_V_OCCURS">
            <xsd:element name="STD_TRN1_MSJ_PARM_V" type="STD_TRN1_MSJ_PARM_V_TYPE" maxOccurs="000005"/>
        </xsd:complexType>
      </xsd:sequence>
    </xsd:complexType>
    <xsd:complexType name="TR_CONS_SALDOS_VISTA_TRN1_I_TYPE">
      <xsd:sequence>
        <xsd:element name="STD_TRN1_I_PARM_V" type="STD_TRN1_I_PARM_V_TYPE"/>
        <xsd:element name="TR_CONS_SALDOS_VISTA_EVT_Y" type="TR_CONS_SALDOS_VISTA_EVT_Y_TYPE"/>
      </xsd:sequence>
    </xsd:complexType>
</xsd:complexType>
</xsd:schema>Thanks you

Problems with Http-servlet : UTF-8

I am having some difficulty with UTF-8 encoded
chracaters in a Java servlet.
My servlet accepts an XML file conteining a question and returns an HTM page. The XML has cyrillic characters encoded as utf-8.. The rendering
servelt copes with this fine, and the HTML produced
displays OK in the browser (the response type on the
Java servelet has to be set to "text/html;
charset=UTF-8" for this to work).
I have to send cyrillic characters back in the
response to the question in a text field in the HTML form.The browser is
correctly sending back the byte stream (which I am
printing here as hex): d0b3d0bed180d0bed0b4 (this is a
cyrillic word correctly coded as utf-8).
However, on collecting the response (using
request.getParameterValues(fieldname)) the servlet
returns the byte stream: d0b3d0bed13fd0bed0b4.
A mistake in the fifth byte.
Can anyone help with this problem? Is there a known problem with the JAVA UTF-8 converter?
Regards
Graham

I now know the answer to this problem thanks to Bruno Van Haetsdaele .
Before calling request.getParameterValues(fieldname));
one should call request.setCharacterEncoding("UTF-8");
Hope that helps somebody else!

JRE/JDK Problem with Applet/Servlet scenario

Hi there!
I'am forced by my company to upgrade an old Java application. The situation is, that an signed applet calls several servlets (running on Tomcat 4.x or 5.x) over http(s).
In former times both, servlet container and applet, were using jre 1.4.1.x
(The servlet container was ServletExec, so a jre was sufficient).
Everything was working fine, if the client was using the 1.4.1 jre.
But on later versions (1.4.2.x) the whole Applet-jar was downloaded from the server per user interaction, whats definitly not acceptable as customers still using isdn or nowadays umts.
Any sugesstions?
Thanks
Buzz

Double Posted:
http://forum.java.sun.com/thread.jsp?thread=553517&forum=33&message=2709389
And the answer is the same. You will have to open multiple connections. One for each time want to send data to the Servlet, because that is how HTTP works.
Try a simple case, where you want to send a single object through to the Servlet, then read the response.
When that works, repeat it for every subsequent time you want to send or recieve data.
If you want to have continuous communication between the server and the client, you do not want to use HTTP.

A problem with RDP when WAEs was connected to the network

The customer has a problem with RDP sessions on one Microsoft cluster server. The problem started when the WAEs (management and acceleration WAEs) are connected to a network (where a cluster is connected). Did anybody have the similar problem? The sessions are connected, but after some different times these sessions are frozen. This problem is only with this Microsoft cluster, the RDP on other servers are good. The WAAS is 4.0.17b14.

Hi,
I have the same problem as I write. RDP seems to get slower when I connect the WAEs and the login timesout before the user can type the username and password.
I have ensured that "EPM Classification" is disbled.
Check and see if Term-services are well configured on the TS server side. Maybe some config is conflicting with WAAS TS optimization.
What happens when you set TS to passthrough?
Also try this for your case;
" HOW-TO: Configuring RDP and Terminal Services for Full WAAS Optimization
Microsoft RDP and Terminal Services are, by default, compressed and encrypted. As such, the default Cisco WAAS policy for these applications is to apply TCP optimizations only. RDP and Terminal Services can be configured to allow Cisco WAAS to provide full optimization (DRE, LZ, TFO) which is a 2X-10X improvement over native WAN and 2X-3X improvement over the compression provided by Microsoft.
Configuring Microsoft RDP and Terminal Services to support Cisco WAAS full optimization requires a change to the client and a change to the server.
On the client, disable compression by editing the .RDP file for the connection using Notepad or a similar text editor. Identify a line in the file that shows "compression:i:1". Modify this line to say "compression:i:0". This disables compression for the RDP/TS connection.
On the server, open the Terminal Services Configuration found under Start > Programs > Administrative Tools. From here, expand Terminal Services Configuration to Connections. Double-click the "RDP-Tcp" entry found in the workspace. Change the encryption level to "Low", which specifies that only login will be encrypted. Then, click "Ok" and close Terminal Services Configuration.
Then, modify the Cisco WAAS policy on the configured device group (or explicitly on each of the WAEs) called "MS-Terminal-Services". Set this policy to "Optimize Full". "
Anyone out there with a clue why RDP gets disconnected?

Metadata problem with JSP/servlet application

Hi,
I developed a JSP/servlet test application that makes
use of kodo 2.2.3 STANDARD EDITION for its persitence.
I successfully compile and annotate the application.
I am also able to successfully generate the db
schema with schematool.
Unfortunately, when I run the application using
Resin 2.0.2, Kodo is unable to initialize properly.
Initially it was not able to find "system.prefs" file.
I fixed that by putting "system.prefs" in WEB-INF\classes.
Unfortunately, Kodo is still unable to initialize and
gives the following message:
The system could not initialize; the following registered
persistent types are missing metadata
or have not been enhanced:
[class com.dpov.purchaseorder.PurchaseOrder,
class com.dpov.catalog.Product,
class com.dpov.uidgen.counter.Counter,
class com.dpov.catalog.dao.jdo.CategoryHierarchyEntry,
class com.dpov.catalog.dao.jdo.CategoryHierarchyDAO,
class com.dpov.pricelist.PriceInfo,
class com.dpov.pricelist.PriceList,
class com.dpov.catalog.Category,
class com.dpov.lineitem.LineItem,
class com.dpov.dealer.Dealer,
class com.dpov.user.User,
class com.dpov.customer.Customer].
I use "system.jdo" to describe metadata for the enhancer.
I tried to put it both in WEB-INF\lib and WEB-INF\classes but
it still fails.
Please note that:
1) my classpath variable is not set
2) my application's class file are in WEB-INF\classes
3) kodo jars are in WEB-INF\lib
4) mysql jdbc driver is in WEB-INF\lib
5) system.prefs is in WEB-INF\classes
6) system.jdo is in WEB-INF\classes
Thanks in advance,
Andrea
system.prefs
<?xml version="1.0"?>
<prefs>
<kodo-license-key>VALID KEY!</kodo-license-key>
<db>
<username></username>
<password></password>
<url>jdbc:mysql://localhost/kodo</url>
<driver>org.gjt.mm.mysql.Driver</driver>
<dictionary>
com.solarmetric.kodo.impl.jdbc.schema.dict.MySQLDictionary
</dictionary>
<warn-on-persistent-type-failure>true</warn-on-persistent-type-failure>
</db>
<tm-location>java:/TransactionManager</tm-location>
</prefs>
system.jdo
<?xml version="1.0"?>
<jdo>
<package name="com.dpov.uidgen.counter">
<class name="Counter" />
</package>
<package name="com.dpov.customer">
<class name="Customer" />
</package>
<package name="com.dpov.user">
<class name="User" />
</package>
<package name="com.dpov.dealer">
<class name="Dealer" />
</package>
<package name="com.dpov.catalog">
<class name="Product" />
</package>
<package name="com.dpov.catalog">
<class name="Category" />
</package>
<package name="com.dpov.catalog.dao.jdo">
<class name="CategoryHierarchyDAO">
<field name="categories">
<collection element-type="com.dpov.catalog.Category"/>
</field>
</class>
</package>
<package name="com.dpov.catalog.dao.jdo">
<class name="CategoryHierarchyEntry">
<field name="attributeValues">
<map key-type="String" value-type="CategoryHierarchyEntry"/>
</field>
<field name="productIds">
<collection element-type="String"/>
</field>
</class>
</package>
<package name="com.dpov.lineitem">
<class name="LineItem" />
</package>
<package name="com.dpov.purchaseorder">
<class name="PurchaseOrder">
<field name="lineItems">
<collection element-type="com.dpov.lineitem.LineItem"/>
</field>
</class>
</package>
<package name="com.dpov.pricelist">
<class name="PriceInfo" />
</package>
<package name="com.dpov.pricelist">
<class name="PriceList">
<field name="priceInfos">
<map key-type="String" value-type="PriceInfo"/>
</field>
</class>
</package>
</jdo>

Hi,
I fixed my problem by setting the system wide variable (WindowsXP)
CLASSPATH to r:\\dealershop\\WEB-INF\\classes.
Thanks,
Andrea
andrea costantinis wrote:
Hi,
I developed a JSP/servlet test application that makes
use of kodo 2.2.3 STANDARD EDITION for its persitence.
I successfully compile and annotate the application.
I am also able to successfully generate the db
schema with schematool.
Unfortunately, when I run the application using
Resin 2.0.2, Kodo is unable to initialize properly.
Initially it was not able to find \"system.prefs\" file.
I fixed that by putting \"system.prefs\" in WEB-INF\\classes.
Unfortunately, Kodo is still unable to initialize and
gives the following message:
The system could not initialize; the following registered
persistent types are missing metadata
or have not been enhanced:
[class com.dpov.purchaseorder.PurchaseOrder,
class com.dpov.catalog.Product,
class com.dpov.uidgen.counter.Counter,
class com.dpov.catalog.dao.jdo.CategoryHierarchyEntry,
class com.dpov.catalog.dao.jdo.CategoryHierarchyDAO,
class com.dpov.pricelist.PriceInfo,
class com.dpov.pricelist.PriceList,
class com.dpov.catalog.Category,
class com.dpov.lineitem.LineItem,
class com.dpov.dealer.Dealer,
class com.dpov.user.User,
class com.dpov.customer.Customer].
I use \"system.jdo\" to describe metadata for the enhancer.
I tried to put it both in WEB-INF\\lib and WEB-INF\\classes but
it still fails.
Please note that:
1) my classpath variable is not set
2) my application\'s class file are in WEB-INF\\classes
3) kodo jars are in WEB-INF\\lib
4) mysql jdbc driver is in WEB-INF\\lib
5) system.prefs is in WEB-INF\\classes
6) system.jdo is in WEB-INF\\classes
Thanks in advance,
Andrea

Problem with a Servlet - URGENT help

Hello
i really need your help. here i uploaded my web project: http://www.2shared.com/file/4450238/aaa4d9cd/JMSTest.html
it's about 2 servlets, one Test servlet sending a message, and another one, Receiver, to receive the message sent via JMS (i use ActiveMQ)
i didn't know what's wrong, if i call http://localhost:8080/JMSTest , then i enter something into that textfield, then i press the button(form action is http://localhost:8080/test ). it writes that "Mesaj trimis" (message sent - written by me in Romanian), and when i call http://localhost:8080/receiver i did not receive the message. Why?
I use queue, so i think the send message is stored in a queue until a receiver receives it.
Please download the project, isn't complicated.
I did not know what's the problem.
here is the server.xml file from Tomcat conf folder:
<?xml version="1.0" encoding="UTF-8"?>
<Server port="8005" shutdown="SHUTDOWN">
<Listener className="org.apache.catalina.mbeans.ServerLifecycleListener"/>
<Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener"/>

<GlobalNamingResources>
    
    <Resource auth="Container" description="User database that can be updated and saved" factory="org.apache.catalina.users.MemoryUserDatabaseFactory" name="UserDatabase" pathname="conf/tomcat-users.xml" type="org.apache.catalina.UserDatabase"/>
</GlobalNamingResources>
<Service name="Catalina">
    <Connector connectionTimeout="20000" port="8080" protocol="HTTP/1.1" redirectPort="8443"/>
    <Connector port="8009" protocol="AJP/1.3" redirectPort="8443"/>
    <Engine defaultHost="localhost" name="Catalina">
      <Realm className="org.apache.catalina.realm.UserDatabaseRealm" resourceName="UserDatabase"/>
      
      <Host appBase="webapps" autoDeploy="true" name="localhost" unpackWARs="true" xmlNamespaceAware="false" xmlValidation="false">
        
        
        
        
       <Context path="/JMSTest" docBase="JMSTest"
        debug="5" reloadable="true" crossContext="true">
    <Resource name="jms/ConnectionFactory" auth="Container"
                 type="org.apache.activemq.ActiveMQConnectionFactory"
                 description="JMS Connection Factory"
                 factory="org.apache.activemq.jndi.JNDIReferenceFactory"
                 brokerURL="vm://localhost"
                 brokerName="LocalActiveMQBroker"
                 userName="activemq" password="activemq"
                 useEmbeddedBroker="false"
                 clientID="TomcatClientID" />
    <Resource name="jms/myQueue" auth="Container"
                 type="org.apache.activemq.command.ActiveMQQueue"
                 description="JMS Queue"
                 factory="org.apache.activemq.jndi.JNDIReferenceFactory"
                 physicalName="TEST.FOO" />
    <Resource name="jms/myTopic" auth="Container"
                 type="org.apache.activemq.command.ActiveMQTopic"
                 description="JMS Topic"
                 factory="org.apache.activemq.jndi.JNDIReferenceFactory"
                 physicalName="TEST.BAR"/>
</Context>
       </Host>
    </Engine>
</Service>
</Server>or, how should i do this, but using Sun Message Queue? my way is using Apache MQ
Thanks
Edited by: Talkabout on Dec 13, 2008 7:15 AM

I didn't go all through your code, but I'd say you should make sure that the Receiver servlet is up and running BEFORE your access the Sender servlet.

Problem with Sessions, Servlets, Netscape and Solaris

We are experiencing a problem that is confounding and frustrating us (I have
          a felling that it is something exremely minor that we are overlooking).
          Here goes:
          Context:
          The problem only occurs when using a netscape browser against weblogic
          4.51running on our Solaris 7 box (Everything works fine through IE, and
          through both browsers against our development machines which are on NT)
          Problem:
          We have a bunch of JSP pages and servlets that are used togehter throughout
          our site. They both manage session information for the user. What is
          happening is that there is no problem maintaining session information among
          all the JSP pages, but when we hit a servlet that we use to stream graphs
          back to the browser, it gets the session but it has no contents all of a
          sudden. What seems to be even more strange is that the session is not
          tagged as new (by checking isNew()), it is just empty of the contents that
          were placed it by the JSP pages. Again, this is only occurring from
          Netscape browsers against our Solaris server.
          If anyone can provide any help it would be greatly appreciated. I can
          provide more details if need be.
          Jeremy


There is a property in the weblogic.properties file that lets you set
          the cookie name. If this isn't set, the port will be appended as part of
          the name. I've had a similar problem switching between http and https
          and losing sessions.
          Carles
          Jeremy wrote:
          >
          > in the link tothe servlet the URL had a :80 in it. This was because the url
          > was generated by a JSP page so that when it was moved from server to server
          > and port to port the code wouldn't have to be changed. Unfortuneately,
          > Netscape sucks and takes this to mean that x.x.x.x and x.x.x.x:80 are
          > different and won't acknowledge the cookie from the JSP pages (x.x.x.x) to
          > the servlet (x.x.x.x:80). Thanks fpr your help.
          >
          > Jeremy <[email protected]> wrote in message
          > news:[email protected]...
          > > my mistake, it appears to always happen on port 80 regardless of the
          > server
          > > it is on.
          > >
          > > Jeff Martin <[email protected]> wrote in message
          > > news:[email protected]...
          > > > It really sounds like your servlet is making a new session, even though
          > > > isNew() doesn't say so. What you might try to do is use session.getId()
          > > > to print out the session ID from your jsp pages as well as your servlets
          > > > to determine if it really is a new session.
          > > >
          > > > Do your servlets and JSPs both use the same scheme (http or https) or
          > > > cookie.setSecure()? Do your cookies use domains or paths in either
          > > > servlets or jsps (cookies can be restricted to certain subdirectories
          > > > which might be different between jsps and servlets)? Are you testing
          > > > through a proxy or firewall, or does either browser have different proxy
          > > > settings than the others?
          > > >
          > > > Jeff
          > > >
          > > > Jeremy wrote:
          > > > >
          > > > > We are experiencing a problem that is confounding and frustrating us
          > (I
          > > have
          > > > > a felling that it is something exremely minor that we are
          > overlooking).
          > > > > Here goes:
          > > > >
          > > > > Context:
          > > > > The problem only occurs when using a netscape browser against weblogic
          > > > > 4.51running on our Solaris 7 box (Everything works fine through IE,
          > and
          > > > > through both browsers against our development machines which are on
          > NT)
          > > > >
          > > > > Problem:
          > > > > We have a bunch of JSP pages and servlets that are used togehter
          > > throughout
          > > > > our site. They both manage session information for the user. What is
          > > > > happening is that there is no problem maintaining session information
          > > among
          > > > > all the JSP pages, but when we hit a servlet that we use to stream
          > > graphs
          > > > > back to the browser, it gets the session but it has no contents all of
          > a
          > > > > sudden. What seems to be even more strange is that the session is not
          > > > > tagged as new (by checking isNew()), it is just empty of the contents
          > > that
          > > > > were placed it by the JSP pages. Again, this is only occurring from
          > > > > Netscape browsers against our Solaris server.
          > > > >
          > > > > If anyone can provide any help it would be greatly appreciated. I can
          > > > > provide more details if need be.
          > > > >
          > > > > Jeremy
          > >
          > >

PathInfo Problem with unregisterd servlets!

Hi!
          When accessing unregistered servlets (with the ServletServlet), the
          pathinfo is not correct in WL 5.1.
          With BETA 2 this problem didn't exist.
          The falling call is made:
          registered:
          http://server/com.servlet.TestServlet/0/frame/test
          -> PathInfo: /0/frame/test
          ServletServlet:
          http://server/servlet/com.servlet.TestServlet/0/frame/test
          -> PathInfo: /com.servlet.TestServlet/0/frame/test
          When will this bug be fixed?
          Dipl. Ing. Alexander Sommer
          Software Development Manager
          http://www.TIScover.com
          TIS
          Tourismus Informations Systeme GmbH
          Softwarepark Hagenberg, Hauptstr. 99
          A-4232 Hagenberg, Austria
          Tel: +43(7236)3343-777
          Fax: +43(7236)3343-782
          e-mail: [email protected]


There is a 'major' difference in the Web server provided in Jdev 3.2.3 and Jdev 9i. The Jdev 3.2.3 web server is a simple 'tes server' ( a light version of WebToGo) to allow for running servlets and JSP pages. In Jdev 9i, we use OC4J which is a J2EE application server for WEB and EJB applications. The Jdev 9i server configuration information cannot be used in Jdev 3.2.3. I dont recommend developing under JDev 9i and running inde Jdev 3.2.3. Since Jdev 9i is now released, I highly recommend that you move up to this release.

LV Version/Runtime Question (working with LV 8.2.1 -- problems with a VI that was original build with LV 7.1)

Hi there,
currently i have a strange problem and i hope some of you can help me.
Ok first i explain my situation:
My task is to expand a old testsystem that was written with LV 7.1.
During the time they began to work with LV 8.2.1 and saved the testsystem-VI with the new LV version.
Ok now my problem:
I have added some SubVIs (build with LV 8.2.1) to the testsystem which open a connection to a DUT (device under test) via fbus, usb or bluetooth (the drivers are designed for .net). But i always get a strange error message when the subVIs try to open the connection ("...Please check your connection string..").
First i checked the handover of the variables in the testsystem but found no mistakes. I also tested all SubVIs seperatly with TestVIs and they worked perfectly!!!
My question:
The main VI was original build with LV 7.1. Could it be possible that LV uses an old or several runtime engines to execute my testsystem which causes such strange problems (For me its the only logical explanation why it works with my Test-VIs but not with the testsystem)?
But maybe you know more about such problems
Greetings, wonx

Hi wonx,
it's really hard to say what might be the problem without knowing your project.
Have you already performed a mass compile in LV8.2? If not, I would suggest to do so. Please see following link for an explanation of how the mass compile option in LabVIIEW works.

Problem with debug servlet Eclipse 3 tomcat 5

I have configured Eclipse 3 with Tomcat 5.0.28 and tomcatPulginV3
but, I have problem to debug my servlet
I have error message
help me it is urgent
Failed to connect to remote VM. Connection refused.
java.net.ConnectException: Connection refused: connect
java.net.PlainSocketImpl.socketConnect(Native Method)
java.net.PlainSocketImpl.doConnect(Unknown Source)
java.net.PlainSocketImpl.connectToAddress(Unknown Source)
java.net.PlainSocketImpl.connect(Unknown Source)
java.net.Socket.connect(Unknown Source)
java.net.Socket.connect(Unknown Source)
java.net.Socket.<init>(Unknown Source)
java.net.Socket.<init>(Unknown Source)
org.eclipse.jdi.internal.connect.SocketTransportImpl.attach(SocketTransportImpl.java:47)
org.eclipse.jdi.internal.connect.SocketAttachingConnectorImpl.attach(SocketAttachingConnectorImpl.java:103)
org.eclipse.jdt.internal.launching.SocketAttachConnector.connect(SocketAttachConnector.java:131)
org.eclipse.jdt.internal.launching.JavaRemoteApplicationLaunchConfigurationDelegate.launch(JavaRemoteApplicationLaunchConfigurationDelegate.java:75)
org.eclipse.debug.internal.core.LaunchConfiguration.launch(LaunchConfiguration.java:569)
org.eclipse.debug.internal.ui.DebugUIPlugin.buildAndLaunch(DebugUIPlugin.java:788)
org.eclipse.debug.internal.ui.DebugUIPlugin$6.run(DebugUIPlugin.java:955)
org.eclipse.core.internal.jobs.Worker.run(Worker.java:66)Thanks

Check your packages which you are importing....

Problem with instaling servlet -Tomcat 4.01 -Win98

Problem is in web.xml fajl
I use
<servlet>
<servlet-name>name</servlet-name>
<servlet-class>package.name</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>name</servlet-name>
<url-pattern>/*</url-pattern>
</servlet-mapping>
Fajl are in webapps/xxx folder Then I start aplication it's work but there is no pictures. (I put them in webapps/xxx/pictures folder, and call them in servlet with img src=\"/xxx/pictures/picture1.gif"\)
Thanks

Hi,
if I understand, you generate img tag from your servlet.
But the img tag is evaluate by client (navigator), so the path must be relative to the servlet root :
img src="pictures/xxx.jpg"
if don't work, try ./pictures/xxx.jpg, but I think it work for Websphere, the first path should work under tomCat.
Regards.

Problem with Controller Servlet in WAS 4.0

Similar Messages

Maybe you are looking for