Problem with creation of the jms event generator

hi,
I have set up a weblogic workshop instance on one of my machines. It has a queue call OUT.QUEUE. The application writes message to this queue. I have set up an integration instance on another machine. I have created a Foreign JMS server to point to the first machine. I have also configured a queue which points to the one on the first machine. However when my integration server starts up, I keep getting the error.
[EJB:010196]'weblogic.jms.common.JMSException: Error creating session' Linked exception = 'weblogic.jms.dispatcher.DispatcherException: could not find JMS Server portalServer'
weblogic.jms.common.JMSException: Error creating session
     at weblogic.jms.frontend.FESession.setUpBackEndSession(Lweblogic/jms/dispatcher/DispatcherId;)Lweblogic/jms/common/Sequencer;(FESession.java:809)
     at weblogic.jms.frontend.FESession.consumerCreate(Lweblogic/jms/frontend/FEConsumerCreateRequest;)I(FESession.java:1049)
     at weblogic.jms.frontend.FESession.invoke(Lweblogic/jms/dispatcher/Request;)I(FESession.java:2573)
     at weblogic.jms.dispatcher.Request.wrappedFiniteStateMachine()Lweblogic/jms/dispatcher/Response;(Request.java:643)
     at weblogic.jms.dispatcher.DispatcherImpl.dispatchSync(Lweblogic/jms/dispatcher/Request;)Lweblogic/jms/dispatcher/Response;(DispatcherImpl.java:179)
     at weblogic.jms.client.JMSSession.consumerCreate(Ljava/lang/String;Lweblogic/jms/common/DestinationImpl;Ljava/lang/String;ZI)Lweblogic/jms/frontend/FEConsumerCreateResponse;(JMSSession.java:1860)
     at weblogic.jms.client.JMSSession.createConsumer(Ljavax/jms/Destination;Ljava/lang/String;ZLjava/lang/String;B)Ljavax/jms/MessageConsumer;(JMSSession.java:1691)
     at weblogic.jms.client.JMSSession.createReceiver(Ljavax/jms/Queue;Ljava/lang/String;)Ljavax/jms/QueueReceiver;(JMSSession.java:1530)
     at weblogic.ejb20.internal.JMSConnectionPoller.setUpQueueSessions(Ljavax/jms/Destination;Ljava/lang/String;III)V(JMSConnectionPoller.java:1767)
     at weblogic.ejb20.internal.JMSConnectionPoller.createJMSConnection()V(JMSConnectionPoller.java:2119)
     at weblogic.ejb20.internal.JMSConnectionPoller.connectToJMS()V(JMSConnectionPoller.java:1192)
     at weblogic.ejb20.internal.JMSConnectionPoller.trigger(Lweblogic/time/common/Schedulable;)V(JMSConnectionPoller.java:984)
     at weblogic.time.common.internal.ScheduledTrigger.run()Ljava/lang/Object;(ScheduledTrigger.java:243)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(Lweblogic/security/subject/AbstractSubject;Ljava/security/PrivilegedAction;)Ljava/lang/Object;(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(Lweblogic/security/acl/internal/AuthenticatedSubject;Lweblogic/security/acl/internal/AuthenticatedSubject;Ljava/security/PrivilegedAction;)Ljava/lang/Object;(SecurityManager.java:121)
     at weblogic.time.common.internal.ScheduledTrigger.executeLocally()V(ScheduledTrigger.java:229)
     at weblogic.time.common.internal.ScheduledTrigger.execute(Lweblogic/kernel/ExecuteThread;)V(ScheduledTrigger.java:223)
     at weblogic.time.server.ScheduledTrigger.execute(Lweblogic/kernel/ExecuteThread;)V(ScheduledTrigger.java:50)
     at weblogic.kernel.ExecuteThread.execute(Lweblogic/kernel/ExecuteRequest;)V(ExecuteThread.java:224)
     at weblogic.kernel.ExecuteThread.run()V(ExecuteThread.java:183)
     at java.lang.Thread.startThreadFromVM(Ljava/lang/Thread;)V(Unknown Source)
Caused by: weblogic.jms.dispatcher.DispatcherException: could not find JMS Server portalServer
     at weblogic.jms.dispatcher.DispatcherManager.dispatcherCreate(Lweblogic/jms/dispatcher/DispatcherId;)Lweblogic/jms/dispatcher/Dispatcher;(DispatcherManager.java:318)
     at weblogic.jms.dispatcher.DispatcherManager.dispatcherFindOrCreate(Lweblogic/jms/dispatcher/DispatcherId;)Lweblogic/jms/dispatcher/Dispatcher;(DispatcherManager.java:368)
     at weblogic.jms.frontend.FESession.setUpBackEndSession(Lweblogic/jms/dispatcher/DispatcherId;)Lweblogic/jms/common/Sequencer;(FESession.java:807)
     ... 20 more
Caused by: javax.naming.NameNotFoundException: Unable to resolve 'weblogic.jms.S:portalServer' Resolved weblogic.jms; remaining name 'S:portalServer'
     at weblogic.jndi.internal.BasicNamingNode.newNameNotFoundException(Ljava/lang/String;Ljava/lang/String;Ljava/util/Hashtable;)Ljavax/naming/NameNotFoundException;(BasicNamingNode.java:924)
     at weblogic.jndi.internal.BasicNamingNode.lookupHere(Ljava/lang/String;Ljava/util/Hashtable;Ljava/lang/String;)Ljava/lang/Object;(BasicNamingNode.java:230)
     at weblogic.jndi.internal.ServerNamingNode.lookupHere(Ljava/lang/String;Ljava/util/Hashtable;Ljava/lang/String;)Ljava/lang/Object;(ServerNamingNode.java:154)
     at weblogic.jndi.internal.BasicNamingNode.lookup(Ljava/lang/String;Ljava/util/Hashtable;)Ljava/lang/Object;(BasicNamingNode.java:188)
     at weblogic.jndi.internal.BasicNamingNode.lookup(Ljava/lang/String;Ljava/util/Hashtable;)Ljava/lang/Object;(BasicNamingNode.java:196)
     at weblogic.jndi.internal.BasicNamingNode.lookup(Ljava/lang/String;Ljava/util/Hashtable;)Ljava/lang/Object;(BasicNamingNode.java:196)
     at weblogic.jndi.internal.WLEventContextImpl.lookup(Ljavax/naming/Name;Ljava/lang/String;)Ljava/lang/Object;(WLEventContextImpl.java:256)
     at weblogic.jndi.internal.WLContextImpl.lookup(Ljava/lang/String;)Ljava/lang/Object;(WLContextImpl.java:363)
     at javax.naming.InitialContext.lookup(Ljava/lang/String;)Ljava/lang/Object;(InitialContext.java:347)
     at weblogic.jms.dispatcher.DispatcherManager.dispatcherCreate(Lweblogic/jms/dispatcher/DispatcherId;)Lweblogic/jms/dispatcher/Dispatcher;(DispatcherManager.java:314)
     ... 22 more
Any ideas?

Hi experts/Sriram...
Thanks for the reply.
The -
>showing the line....
QS80_TAB-DEDMT=QS80_TAB-DEDMT+S80-DEDMT
Where should we change to get rid of this runtime error.
Here in my quality everthing is fine and we have uploaded patches in quality upto recent one sp80.But in prod. the patchlevel is sp71.Will it be the reason.
Please advice me on this as i have to complete the issue of F16.
Thanks and Regards,
V Sai.

Similar Messages

Problems with body email using Email Event Generator

Hi I need to start a workflow when an email is received by a email account. In
order to do that, I built a Email Event Generator that uses the next channel:
<?xml version="1.0"?>
<channels xmlns="http://www.bea.com/wli/broker/channelfile"
          channelPrefix="/cgr"
          xmlns:eg="http://www.bea.com/wli/eventGenerator"
          xmlns:dp="http://www.bea.com/wli/control/dynamicProperties"
          xmlns:oagpo="http://www.openapplications.org/003_process_po_007">
     <channel name ="Rendicion" messageType="none">
          <channel name ="RendicionEmail" messageType="xml"
          qualifiedMessageType="oagpo:PROCESS_PO_007"
          qualifiedMetadataType="eg:EmailEventGenerator"/>
     </channel>
</channels>
I'm using "Suscribe to a Message Broker" oprtion to start my work flow. That option
uses two input variables: com.bea.xml.XmlObject and com.bea.wli.eventGenerator.EmailEventGeneratorDocument.
* @jpd:mb-static-subscription message-metadata="{x1}" message-body="{x0}"
channel-name="/cgr/Rendicion/RendicionEmail"
public void subscription(com.bea.xml.XmlObject x0, com.bea.wli.eventGenerator.EmailEventGeneratorDocument
x1)
//#START: CODE GENERATED - PROTECTED SECTION - you can safely add code
above this comment in this method. #//
// input transform
// parameter assignment
this.body = x0;
this.emailXML = x1;
//#END : CODE GENERATED - PROTECTED SECTION - you can safely add code
below this comment in this method. #//
That configuration only functions when the email has plain text body containing
a xml structure. Other waise that error is showed by the server:
<Oct 24, 2003 4:16:26 PM GMT-05:00> <Error> <WLI-Core> <BEA-530203> <Error while
publishing message: com.bea.wli.mbconnector.
MBConnMDBBase$MBConnectorException: Can't create process variable: com.bea.wli.mbconnector.MBConnMDBBase$MBConnectorException
: Can't read XML (no root element)>
<Oct 24, 2003 4:17:26 PM GMT-05:00> <Error> <WLW> <000000> <Error publishing email:
com.bea.wli.mbconnector.MBConnMDBBase$MBC
onnectorException: Can't create process variable: com.bea.xml.XmlException: error:
Unexpected element: TAG_END>
<Oct 24, 2003 4:17:26 PM GMT-05:00> <Error> <WLI-Core> <BEA-530203> <Error while
publishing message: com.bea.wli.mbconnector.
MBConnMDBBase$MBConnectorException: Can't create process variable: com.bea.xml.XmlException:
error: Unexpected element: TAG_E
ND>
Is it a Bug?, or Is the configuration wrong?
Thank you very much
David

I've got the same issue going on here... I also posted the problem to this newsgroup
earlier today.... please check your log files or server output window to see if
you're also getting the encoding error...
"David Uribe" <[email protected]> wrote:
>
Hi I need to start a workflow when an email is received by a email account.
In
order to do that, I built a Email Event Generator that uses the next
channel:
<?xml version="1.0"?>
<channels xmlns="http://www.bea.com/wli/broker/channelfile"
          channelPrefix="/cgr"
          xmlns:eg="http://www.bea.com/wli/eventGenerator"
          xmlns:dp="http://www.bea.com/wli/control/dynamicProperties"
          xmlns:oagpo="http://www.openapplications.org/003_process_po_007">
     <channel name ="Rendicion" messageType="none">
          <channel name ="RendicionEmail" messageType="xml"
          qualifiedMessageType="oagpo:PROCESS_PO_007"
          qualifiedMetadataType="eg:EmailEventGenerator"/>
     </channel>
</channels>
I'm using "Suscribe to a Message Broker" oprtion to start my work flow.
That option
uses two input variables: com.bea.xml.XmlObject and com.bea.wli.eventGenerator.EmailEventGeneratorDocument.
* @jpd:mb-static-subscription message-metadata="{x1}" message-body="{x0}"
channel-name="/cgr/Rendicion/RendicionEmail"
public void subscription(com.bea.xml.XmlObject x0, com.bea.wli.eventGenerator.EmailEventGeneratorDocument
x1)
//#START: CODE GENERATED - PROTECTED SECTION - you can safely
add code
above this comment in this method. #//
// input transform
// parameter assignment
this.body = x0;
this.emailXML = x1;
//#END : CODE GENERATED - PROTECTED SECTION - you can safely
add code
below this comment in this method. #//
That configuration only functions when the email has plain text body
containing
a xml structure. Other waise that error is showed by the server:
<Oct 24, 2003 4:16:26 PM GMT-05:00> <Error> <WLI-Core> <BEA-530203> <Error
while
publishing message: com.bea.wli.mbconnector.
MBConnMDBBase$MBConnectorException: Can't create process variable: com.bea.wli.mbconnector.MBConnMDBBase$MBConnectorException
: Can't read XML (no root element)>
<Oct 24, 2003 4:17:26 PM GMT-05:00> <Error> <WLW> <000000> <Error publishing
email:
com.bea.wli.mbconnector.MBConnMDBBase$MBC
onnectorException: Can't create process variable: com.bea.xml.XmlException:
error:
Unexpected element: TAG_END>
<Oct 24, 2003 4:17:26 PM GMT-05:00> <Error> <WLI-Core> <BEA-530203> <Error
while
publishing message: com.bea.wli.mbconnector.
MBConnMDBBase$MBConnectorException: Can't create process variable: com.bea.xml.XmlException:
error: Unexpected element: TAG_E
ND>
Is it a Bug?, or Is the configuration wrong?
Thank you very much
David

JMS event generator extract custom jms property

[cross posted from integration.interest - this seems the correct place to post]
Hi, I was looking for a way to enable a workflow/process to extact a custom jms property that is send with a jms message to the jms event generator.
So the client inserts name/value pair inside the jms message, the event generator picks up the message and starts a workflow. How can I extract that custom name/value pair once inside the workflow/process ?
TIA

Hey can u tell me the solution for this problem.....I am also facing similar problems......Help is appericiated....

JMS event generator accepts messages, but won't push out to channels

I am monitoring the JMS event generator through the WLIconsole, and I can see the
messages coming in. I have a channel rule defined for this particular event generator
- it just allows everything through (by leaving the name and value fields blank).
I can see that there is a channel listed under the channel count.
However, when I go under the Message Broker window, and check the channel, there
are zero subscribers. This is probably why the messages that are going into
the generator aren't being recieved by anyone.
I'm trying to use this channel to kick off a workflow - so the event choice start
node is set to listen to a channel, but I don't think it actually subscribes to
the channel - if it did, why wouldn't it be listed under the WLI console as a
subscriber? How do I get the start node to listen to the channel? How do I get
the messages from the event generator into the channel?

Hello MS, Question: Do any of the LED lights on the keyboard turn on when the computer doesn’t boot? Here’s an HP troubleshooting document for notebooks that won’t start, along with some info about LED error codes: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c01732674 If that doesn’t help, it is probably a hardware issue. Since you've only had the notebook for 10 months it’s probably still under warranty. You can contact HP: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html Please let me know if any of these suggestions helped. If not, I will try to investigate further. TobindoHP Representative

Using a Foreign JMS Destination as a JMS Event Generator Subscription

NOTE THIS IS BUMPED UP FROM ROBERT NORTON'S POST. I am having the same
problem here. From the wliconsole, the only queues listed to have events
generated from are local ones.
Hello,
I'm trying to create a workflow that is started by a JMS message queue
event.
I'm trying to use the WLIJMSEventGenTool in WebLogic 8.1 to listen to a
queue
on a remote WebLogic 8.1 installation, publish the incoming messages to
a channel,
then initiate a workflow by subscribing to that channel. Here's a copy
of my configuration
file for the tool:
<message-broker-jms-event-generator-def
source-jndi-name="SearchInputQueue"> <channel
name="/srm/sInput/sInput" /> </message-broker-jms-event-generator-def >
I tried to tackle this by configuring a foreign JMS Server, Connection
Factory,
and Destination using the Weblogic Admin Console. Below are the
parameters I used
to define the remote connection
Foreign JMS Server:
jndi initial context factory: weblogic.jndi.WLInitialContextFactory jndi
connection
url: //OPER1090:7001
Foreign connection factory:
local jndi name: FtsFactory remote jndi name:
weblogic.jws.jms.QueueConnectionFactory
(Are username and password required?)
Foreign JMS Destination:
local jndi name: SearchInputQueue remote jndi name:
InternalSearchInputQueue
After I try to deploy my generated JMS Event jar, I receive the
following error:
<Jun 6, 2003 10:31:50 AM EDT> <Warning> <EJB> <BEA-010061> <The
Message-Driven
E JB: SearchInputQueue-UnorderedMessageListener is unable to connect to
the JMS
de stination: SearchInputQueue. The Error was: [EJB:011010]The JMS
destination
with the JNDI name: SearchInputQueue could not b e found. Please ensure
that the
JNDI name in the weblogic-ejb-jar.xml is correct , and the JMS
destination has
been deployed.>
I'm pretty sure the problem is simply that my syntax is off somewhere in
my configuration.
I found the existing BEA documentation to be a bit too generic,
containing no
specific examples of the proper syntax to use for this task. Can anyone
offer
any advice or better, a working example? Any BEA reps out there?

NOTE THIS IS BUMPED UP FROM ROBERT NORTON'S POST. I am having the same
problem here. From the wliconsole, the only queues listed to have events
generated from are local ones.
Hello,
I'm trying to create a workflow that is started by a JMS message queue
event.
I'm trying to use the WLIJMSEventGenTool in WebLogic 8.1 to listen to a
queue
on a remote WebLogic 8.1 installation, publish the incoming messages to
a channel,
then initiate a workflow by subscribing to that channel. Here's a copy
of my configuration
file for the tool:
<message-broker-jms-event-generator-def
source-jndi-name="SearchInputQueue"> <channel
name="/srm/sInput/sInput" /> </message-broker-jms-event-generator-def >
I tried to tackle this by configuring a foreign JMS Server, Connection
Factory,
and Destination using the Weblogic Admin Console. Below are the
parameters I used
to define the remote connection
Foreign JMS Server:
jndi initial context factory: weblogic.jndi.WLInitialContextFactory jndi
connection
url: //OPER1090:7001
Foreign connection factory:
local jndi name: FtsFactory remote jndi name:
weblogic.jws.jms.QueueConnectionFactory
(Are username and password required?)
Foreign JMS Destination:
local jndi name: SearchInputQueue remote jndi name:
InternalSearchInputQueue
After I try to deploy my generated JMS Event jar, I receive the
following error:
<Jun 6, 2003 10:31:50 AM EDT> <Warning> <EJB> <BEA-010061> <The
Message-Driven
E JB: SearchInputQueue-UnorderedMessageListener is unable to connect to
the JMS
de stination: SearchInputQueue. The Error was: [EJB:011010]The JMS
destination
with the JNDI name: SearchInputQueue could not b e found. Please ensure
that the
JNDI name in the weblogic-ejb-jar.xml is correct , and the JMS
destination has
been deployed.>
I'm pretty sure the problem is simply that my syntax is off somewhere in
my configuration.
I found the existing BEA documentation to be a bit too generic,
containing no
specific examples of the proper syntax to use for this task. Can anyone
offer
any advice or better, a working example? Any BEA reps out there?

Using JMS Event Generator w/ remote WebLogic 8.1 queue

Hello,
I'm trying to create a workflow that is started by a JMS message queue event.
I'm trying to use the WLIJMSEventGenTool in WebLogic 8.1 to listen to a queue
on a remote WebLogic 8.1 installation, publish the incoming messages to a channel,
then initiate a workflow by subscribing to that channel. Here's a copy of my configuration
file for the tool:
<message-broker-jms-event-generator-def source-jndi-name="SearchInputQueue"> <channel
name="/srm/sInput/sInput" /> </message-broker-jms-event-generator-def >
I tried to tackle this by configuring a foreign JMS Server, Connection Factory,
and Destination using the Weblogic Admin Console. Below are the parameters I used
to define the remote connection
Foreign JMS Server:
jndi initial context factory: weblogic.jndi.WLInitialContextFactory jndi connection
url: //OPER1090:7001
Foreign connection factory:
local jndi name: FtsFactory remote jndi name: weblogic.jws.jms.QueueConnectionFactory
(Are username and password required?)
Foreign JMS Destination:
local jndi name: SearchInputQueue remote jndi name: InternalSearchInputQueue
After I try to deploy my generated JMS Event jar, I receive the following error:
<Jun 6, 2003 10:31:50 AM EDT> <Warning> <EJB> <BEA-010061> <The Message-Driven
E JB: SearchInputQueue-UnorderedMessageListener is unable to connect to the JMS
de stination: SearchInputQueue. The Error was: [EJB:011010]The JMS destination
with the JNDI name: SearchInputQueue could not b e found. Please ensure that the
JNDI name in the weblogic-ejb-jar.xml is correct , and the JMS destination has
been deployed.>
I'm pretty sure the problem is simply that my syntax is off somewhere in my configuration.
I found the existing BEA documentation to be a bit too generic, containing no
specific examples of the proper syntax to use for this task. Can anyone offer
any advice or better, a working example? Any BEA reps out there?

Hello,
I'm trying to create a workflow that is started by a JMS message queue event.
I'm trying to use the WLIJMSEventGenTool in WebLogic 8.1 to listen to a queue
on a remote WebLogic 8.1 installation, publish the incoming messages to a channel,
then initiate a workflow by subscribing to that channel. Here's a copy of my configuration
file for the tool:
<message-broker-jms-event-generator-def source-jndi-name="SearchInputQueue"> <channel
name="/srm/sInput/sInput" /> </message-broker-jms-event-generator-def >
I tried to tackle this by configuring a foreign JMS Server, Connection Factory,
and Destination using the Weblogic Admin Console. Below are the parameters I used
to define the remote connection
Foreign JMS Server:
jndi initial context factory: weblogic.jndi.WLInitialContextFactory jndi connection
url: //OPER1090:7001
Foreign connection factory:
local jndi name: FtsFactory remote jndi name: weblogic.jws.jms.QueueConnectionFactory
(Are username and password required?)
Foreign JMS Destination:
local jndi name: SearchInputQueue remote jndi name: InternalSearchInputQueue
After I try to deploy my generated JMS Event jar, I receive the following error:
<Jun 6, 2003 10:31:50 AM EDT> <Warning> <EJB> <BEA-010061> <The Message-Driven
E JB: SearchInputQueue-UnorderedMessageListener is unable to connect to the JMS
de stination: SearchInputQueue. The Error was: [EJB:011010]The JMS destination
with the JNDI name: SearchInputQueue could not b e found. Please ensure that the
JNDI name in the weblogic-ejb-jar.xml is correct , and the JMS destination has
been deployed.>
I'm pretty sure the problem is simply that my syntax is off somewhere in my configuration.
I found the existing BEA documentation to be a bit too generic, containing no
specific examples of the proper syntax to use for this task. Can anyone offer
any advice or better, a working example? Any BEA reps out there?

Suspending JMS event generator

Hi,
How do I suspend a jms event dynamically?
I know that this can be done with WLI Admin Console but is there another way to do this without user intervention?
Help appreciated.

Hello,
event generators are in most cases EJBs (the HTTP event generator may be the only exeption).
Suspending is actually equal to undeploying.
I do not know, if you can use the event generator MBeans, but you can always use the weblogic.Admin command to undeploy/redeploy a JMS event generator.
-Kai

WLI 10g3 JMS Event Generator for Foreign Queues

Hi,
Our requirement is to listen to messages on a remote destination on another weblogic instance (8.1).
One option we are trying is create a foreign JMS Module on local server (10g3) to connect to the remote destination
and use JMS Event Generator to poll for messages on the local Foreign JMS Module and fetch the message and publish this
message into a message channel.
This works fine when I have a local JMS Queue and JMS Event Generator tries to listen to it.
But while trying to use JMS Event Generator against foreign JMS module we are getting stuck with error failed to establish JMS Session :
<Jul 8, 2009 12:26:29 PM IST> <Warning> <EJB> <BEA-010096> <The Message-Driven EJB: foreignGenEventName is unable to connect to the JMS destination or bind to JCA resource adapter: test.mydestination. Connection failed after 64 attempts. The MDB will attempt to reconnect/rebind every 10 seconds. This log message will repeat every 600 seconds until the condition clears.>
<Jul 8, 2009 12:26:29 PM IST> <Warning> <EJB> <BEA-010061> <The Message-Driven EJB: foreignGenEventName is unable to connect to the JMS destination: test.mydestination. The Error was:
weblogic.jms.common.JMSException: Error creating session
Nested exception: weblogic.jms.common.JMSException: Error creating session
Nested exception: weblogic.jms.common.JMSException: Error creating session
Nested exception: weblogic.messaging.dispatcher.DispatcherException: could not find Server AdminServer
Nested exception: javax.naming.NameNotFoundException: Unable to resolve 'weblogic.messaging.dispatcher.S:AdminServer'. Resolved 'weblogic.messaging.dispatcher'; remaining name 'S:AdminServer'>
Any pointers to a possible issue will eb really helpful.
Thanks,
CA

Varun,
Thanks for your inputs. Regarding the possibility of misconfiguring the ForeignJMSServer , we are able to view the remote destinationname (also the jndi binding name) in the jndi tree of the local server console, which in my opinion translates to a valid configuration.
Can anyone let me know if this issue is fixed in 10.3 as there is a CR raised in the 10.0 version as well for this?
CR332983
CR326377 It was not possible to deploy an MDB while connecting to a foreign JMS provider through WLS foreign server resources configured in a JMS module.
Thanks,
CA
Edited by: user1549937 on Jul 9, 2009 4:26 AM

JMS event generator only gets non-transactional queue msg

Hi,
I have created a JMS event generator to listen to a particular queue. It seems to work perfectly fine if, when posting a message to the queue that the JMS EG is listening to, the queue created is a non-transactional queue, i.e. queueConnection.createQueueSession(false, ...).
However if I created a transactional queue to post message to the JMS EG, i.e. queueConnection.createQueueSession(true, ...), then the JMS EG can't seem to see the message. I checked in the WLI Admin console, JMS EG section, and there are no messages read by the particular JMS EG after I have posted the msg to the queue.
My question is: is there a known limitation on the JMS EG that it can only read from a non-transactional JMS queue, or is this a bug? (I am using weblogic 8.1 sp2).
Thanks
Regards,
xlfhk

Hi,
sorry, just discovered it's my mistake. Instead of using the transaction created when calling queueConnection.createQueueSession(true, ...), and committing that, I created a JTA transaction artificially wrapping the entire chunk of code.
As a result, I ended up with a pair of transactions that are nested (I think ...), and the external transaction's commit was called when the nested JMS transaction hasn't been committed yet. As a result, no commit ever took place (I think again ...).
I have now tried calling queueSession.commit() after sending the message. It seems to work fine. Thanks for the help.
Regards,
xlfhk.

MapMessage and JMS Event Generator

Hello
I need to set up a WLI JMS event generator that will consume a JMS MapMessage. It appears that the only message types supported by a JMS event generator are xml, rawData, string and none.
I've already tried each of these and for each I get a message saying "Cannot publish non-TextMessage to channel of type String" or "Cannot publish non-ByteMessage to channel of type ...".
I have sent MapMessage types using WLI's JMS controls. Is there a way to consume a MapMessage type via an event generator?
Thanks
Tom

Bishu thanks, Channel type is defined as String, Message on JMS queue are of type String. Also can you elaborate on "JMS event generator check the type of message you want to process." that you mentioned. I have not found this option while configuring JMS EG. (We are using ver. 8.1 sp 5)
This was working fine in local env. But when we configured message bridge between MQ queue and JMS queue, we startted getting error messages. I am trying to find out how does MQ stores messages. Doing integrations with MQ has been real headache for us.

Problems with creation of catalogue XPGrpwise and temporary

Problems with creation of catalogue XPGrpwise and temporary files.
I use GroupWise 8.01 and WinXP (SP2), OpenOffice 3.1.
Why at opening files in Library, temporary files are not created in catalogue C:\Documents and Settings\Jon Smith\Local Settings\Temp\XPGrpwise, and created in catalogue C:\Documents and Settings\Jon Smith\My Documents. That causes problems. How to change a situation that worked as it is necessary.
Catalogue XPGrpWise is created and leaves duly in catalogue C:\Documents and Settings\Jon Smith\Local Settings\Temp\.

Cvetaev,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Problem with Creation of TemSe file...

HI Experts...
Here im facing the problem with creation of # 3 rd Quarters
Temse file.when ever i use the tcode pc00_m40_f24 and entering the details of quater 3 ...here im showing up the ABAP Runtime error."""Overflow for arthimitic operation Type P in program HINCF240"".
What could be done to overcome the problem.Please advice.
Regards,
V Sai.

Hi experts/Sriram...
Thanks for the reply.
The -
>showing the line....
QS80_TAB-DEDMT=QS80_TAB-DEDMT+S80-DEDMT
Where should we change to get rid of this runtime error.
Here in my quality everthing is fine and we have uploaded patches in quality upto recent one sp80.But in prod. the patchlevel is sp71.Will it be the reason.
Please advice me on this as i have to complete the issue of F16.
Thanks and Regards,
V Sai.

There is any Performance problem with Creation of many Y or Z Programs.

HI,
There is any Performance problem with Creation of many Y or Z Programs. plz give clarity regarding this to me......
regards
ganesh

Ganesh,
Can you please mention the context and the purpose of creating these custom program. And application are you referring to?
Regards,
Rohit

Problem with creation of jar with external libraries

hi guys, I've no problem with creation of jar,i use this command:
jar -mcf MANIFEST.MF NameFile.jar *.class
my file manifest is this:
Manifest-Version: 1.0
Created-By: Me
Main-Class: NameFile
Now,I've to make a jar file,but i have to use some external libraries in jar format.
I've read on sun tutorial and i've added to manifest this line:
Class-Path: dt.jar formshelp.jar formsrt.jar jh.jar looks-1.3.1.jar substance.jar TableLayout.jar
But the jar file doesn't work, neither with a double click nor with console...
Someone can help me?Thanks!:)

Darkweb wrote:
sorry but,the external libraries that i use are in .jar,what i've to do to include these libraries in my jar?One of 3 things
1) Take them out of the jar, and put them in a folder, preferably a folder in the same folder as the jar
2) Write a custom classloader to load classes from nested jars
3) Extract the contents of all the dependency jars, and jar them all up with your own code
The first is almost always the most preferable, the second one is doable but brittle and resistent to updating dependencies ( you have to release everything for any changes you need, even if it's not a change in your own code ) and the third one is tedious and suffers from the same robustness problems of the second, not to mention that a lot of software licences prohibit you from actually doing it. Do the first one, it's by far the most common and easiest to maintain. I really wouldn't advise the third option, ever, though. Any activity that reduces the modularity of your application is ill-advised

Problem with variable in the woorkbook selection screen.

Hi All,
I have Problem with Variable in the selection screen. I have four variable in the report in this sequence
<b>Plant (optional), calendar month (mandatory), material (optional), Customer (mandatory). </b>
In Development system, I changed the query to fix the problem for a formula. saved and executed the query. In the selection screen appeared four variables and executed. after executing the query and I saved the work book also. I logged out of the Bex Analyzer. In the RSRT I generated the report by clicking the Generated Report push button. and again logged into the Bex analyzer and ran the work book, now in the selection screen, appeared three Variables only, I am missing the variable <b>Customer</b>.
The old report which is already in the Production system is working fine. What could be the mistake I did in the development system.
It is very urgent, I need to deliver this object as soon as possible.
Can I anybody help on the same.
Thanks in advance
Narendra

Yunus,
I did what you said. I removed the variable from characteristic restrictions, saved the query and executed the query, appeared three variables Plant, Calender month and material. executed and saved the work book. disconeted from Bex analyzer, in RSRT Generated Report and logged into Bex analyzer ran the work book for selection Plant, calender month and material and went into change query definition and added the variable for customer which was removed earlier and and ran the query for selections Plant, Calender monmth, Material and customer. saved the work book. disconnected from Bex analyzer and closed all excel sheets and work books. In RSRT Generated Report and again connected to Bex analyzer and ran the work book, now appeared only three variables again missed variable customer.
Yunus does any missed n the procedure what i did.
It is helped what Chris was answered.
Many Many Thaks for your time and replies.
Thaks in advance
Narendra

Problem with creation of the jms event generator

Similar Messages

Maybe you are looking for