Problem with cropped WPF content in an ElementHost

I am displaying a WPF control inside an ElementHost. It works on most systems but on SOME the content gets cropped. Can anyone help me in the right direction with this?

Thank you for your suggestions. As it turned out there are some rendering problems in some systems with WPF content hosted in WinForms. It can be solved by setting rendering mode to software only:
public partial class App
protected override void OnStartup(StartupEventArgs e)
base.OnStartup(e);
RenderOptions.ProcessRenderMode = RenderMode.SoftwareOnly;

Similar Messages

After update 8.1.2 i had problem with sync my content from ITunes with IPod

After update 8.1.2 i had problem with sync my content from ITunes with IPod. It stucks on moment when its waiting for implementing changes (step 5 of 5) Hours and hours i'm waiting but still the same. So i cant use my Ipod at all. I restarted Ipod and delete and download Itunes again. Still stuck in the same moment. Help please. Someone has some problems like that?

I have an error message saying that "An unknown error occurred (-54)"

If I change the nation setting of my iTunes in order to buy a song from the American iTunes store, then change my setting back to the Korean store (where you cannot buy music) will that create any problems with my downloaded content?

If I change the nation setting of my iTunes in order to buy a song from the American iTunes store, then change my setting back to the Korean store (where you cannot buy music) will that create any problems with my downloaded content? I want to buy an album that I cannot get hold of in Korea, but it is available in the US iTunes store. However since most of my apps are downloaded from the Korean store I'll need to switch back in order to update them. Does anyone know if there are any issues in doing this. I'd rather find out before I spend money, change my store setting back to Korea, and then get told I can't listen to the music because I bought it from the US store and my iTunes is set to the Korean store.
Cheers.

You canot easily change your country settings. The iTunes Store in a country is intended only for use by that country's residents, and only while they are in the country. To use the iTunes Store in a country you need a credit card (or other card type if acceptable in a country) issued in that country, billed to an address in that country, and also be physically present in that country when using the store. You are also restricted to waiting 90 days between country changes.
E.g., "The iTunes Service is available to you only in the United States, its territories, and possessions. You agree not to use or attempt to use the iTunes Service from outside these locations. Apple may use technologies to verify your compliance." - http://www.apple.com/legal/itunes/us/terms.html#SERVICE

Problem with cropping photo

I have a problem with cropping photos in iPhoto and Pictures on my iPad. It makes me strange pixels. I have same problem in iPhoto when processing journals.
Some photo of problem
https://imtransfer.shapeservices.net/uploads/1931133603126172713/Image.jpg
https://imtransfer.shapeservices.net/uploads/4532133603143641081/Image.jpg
Thanks.

I face the same problem.
Cropping my pictures now with PS Express and PS Touch.

Aperture 2.1.3 Export Problems with Cropped Photos

I ran into an odd problem after updating to 2.1.3. I was trying to upload to a Picasa album via "aperture-picasa-plugin", which I had used before without problems. The resulting export had problems with two photos I had cropped from landscape to portrait size. The resulting exports had the entire uncropped/original content "squeezed" into a photo matching the cropped size, so the exported pics were squished making everything look tall and skinny. (I found it especially odd that stuff I had cropped out was back in, but the size was cropped.)
I assumed it was a problem with the plugin, so I exported to a file straight from Aperture and had the same problem. I had other crops that worked OK, but they appear to all be landscape to landscape with no change in aspect ratio.
Is anyone else having this problem?

YES!
I have seen this show up as well. I'm also using Aperture 2.1.3. I too thought it was the fault of the picasa plugin... but when I, like you, started doing my exports directly to files I noticed that they still had the same problem.
The horizontal 16x9 seems to be particularly vulnerable... And, yes, it almost looks as if the (pre-crop) master has been "squished" into the aspect ratio of the (post-crop) version. It is very strange, very annoying, and very intermittent. Although, I found that if I quit aperture, restart then re-export... I have better luck.
Boy, am I relieved to find somebody else who is having this problem. For a while there I thought I was going nuts.
-C.

Problem with buttons in Content Viewer iPad app

Hi,
I'm having a problem with my navigation once my app is viewed on the iPad. All pages in all of my articles are using the same master page for a menu button, and they all work when I view the app through the Content Viewer on my desktop. Once I log in to the Content Viewer on my iPad, however, the menu button on the first page of every article doesn't work. I did a test of swapping the first page with the second page in one of the articles, and the original page's menu button then worked while the second page's (now located at the beginning) wasn't being read. Other buttons on the first page work (which are also from the master page), it's just the menu button that makes my table of contents box appear. I have eleven articles in my folio and it's happening on the first page of every single one. Not too sure what's going on here, any help is appreciated.
Thanks.

I also figured out after playing around with it a bit more that this only happens when "Horizontal swipe only" is checked in the properties.

Span columns problem with Table of Contents order

Hello,
I'm having a strange issue with headings that span columns and Table of contents order. My document has a heading paragraph in a coloured box, which is then inserted in-line into a 2-column text box. The paragraph style for the box (set to in-line) is set to span all columns, so that the 2-columned text doesn't get messed up.
When I create a table of contents, the Heading style that is inside the coloured box is being picked up fine, but even though it is inserted before the headings below it, it is showing up after the level 2 headings, instead of before.
I have confirmed that the insertion of the blue bar is before the text below it, as when I remove the span columns option, the TOC works as it is supposed to. Is this a bug?

Hi there, thanks for the reply.
The only way I could move the inline box to the left was to make a custom anchor and change the X value, this did not affect the TOC unfortunately. I also checked the location of the invisible marker indicating the location of the inline text box, and it is definitely before the heading that follows. I confirmed this by removing the span columns option for that paragraph, and the TOC displayed properly after doing that, meaning there is likely some problem with the span columns option not properly recognizing the order of content.
Regards,

Problem with images in content management portlet

Hi all,
I'm trying to use the content management portlet provided with Bea WLP 8.1 SP4, but I've a problem with the images (they're not displayed at all, only a lot of red "X"s). Some how it seems to be a problem with the Taglib render. It tries to get the resourceRootPath to post it in front of the src path in the image tag and it always includes the parameter that are in the URL.
I followed the instructions in the help of workshop, so I think I've imported every needed files. Moreover, the images are in the right folder tree. The wired thing is, that the My Content Portlet works fine.
Any help for a newbie???
Cheers,
Cord

Hi Cord,
I was having that same problem, and I couldn't find anything on this website either. I tried creating a new portal project and following the directions exactly again, but it didn't work there either. It works in the sample portal.
So I contacted BEA Support, and they were able to provide me with a solution:
The file url-template-config.xml (in the WEB-INF directory) has to be modified and have the {url:currentPage} parameter removed in order to get the images working for the content management portlet. For now, do this only in the section . Leave the other places like in WSRP etc as it is.
I actually took it out of the WSRP places too, by accident, but I don't use WSRP anyway, and everything else seems to be working fine. And the images show up!
Hope this works for you too,
Beth

Strange problem with cropping a PDF

Hello,
I am having an issue with cropping PDFs. I have tried various versions of Acrobat as well as an application called Nitro PDF Professional.
Here is the situation. I can crop the PDF without any problem but the file size remains just about the same as the original and if I use other software to convert the cropped PDF to JPG, the entire original, uncropped PDF page reappears in the JPG.
I believe what I am experiencing is described at this link
http://groups.google.com/group/alt.graphics.illustrator/browse_thread/thread/7660de2cf9888 9b1
My question is, does anyone know a way to really crop a PDF, where the uncropped part of the page is really gone and not just "hidden"?
Thanks in advance for all replies.

I had mentioned Reduce File Size since I think that in earlier versions it was supposed to delete the cropped out area, though that may be my memory of a different application than AA. When I tried that with AA8.1.2, the crop could still be removed. The same happened with the PDF Optimizer. One sure way to remove the unwanted part is to print to a new PDF. However, you will lose any bookmarks and such.

Problems with the Spry Content Slider Widget in DW6

Hello there,
I have been wrestling with a problem I'm having with the Spry Content Slider Widget that I hope someone has an answer for.
I have 2 widgets on a page, but the problem I'm having occurs whether there is 1 or 2 on the page.
No matter how many slides I have in the widget, it only shows the first 3. The 2 widgets per page occurs on every html page (9 in total.)
In there a setting in the inline or linked .js code limiting the number of slides to 3?
In addition to these widgets, I also use a DWUser_EasyRotator Slider on the pages, and both the easyRotator and Spry Widgets launch a fancyBox jQuery Gallery. Tho it's a possibility, I don't think the mixing of sliders/js is the problem, as I was having the problem with the Spry Widget showing only the first 3 upon the first insert of the Widget.
Any suggestions on settings I should be aware of, as regards the Widget, would be greatly appreciated… (;

On line 66 of your code, you have an extra </head> tag that doesn't belong. Remove that and validate your code again.
http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Fwww.gallerynumber9.com.au%2Findex ---778.html
Nancy O.

PSE7 Problem with cropping

Seems lately that when I try to crop a photo the first time after opening PSE7, it works fine. But subsequent attempts will not let me specify a width and length. When I click in those areas it's as if they are "grayed-out". Menu items associated with cropping are also "grayed-out". My only option is to exit PSE and then re-open. It works fine for the first attempt but then the problem occurs again. Any idea what may be causing this? It just started doing this the past month or so - previously worked fine. Thanks.
Denny Riffert

When this occurs, everything to do with cropping is greyed-out. I am not able to change any options on cropping so I have to close PSE and re-open. If it only happened infrequently, I wouldn't worry about it but it happens every thime I have PSE open and try to crop an image onte the sencond or thrid attempt. Do you think that reinstalling PSE would fix this problem? Thanks.
Denny

Problem with some Video Content not able to be shown. no Plug in for it

I am getting a Problem with some News Sites Articles Video Content not being able to be shown, BBC, YAHOO,etc I am getting the message/has content of Mime type Audio/x -pn-RealAudio-Plug in Because you dont have plug in for this mime type it cant be displayed. Also I am getting a Message Url not Valid
Help Please. Thanking You
I .Mac 17 Mac OS X (10.4.8) intel core 2 duo

Did you install Real Player (free version)?
<https://order.real.com/pt/order.html?country=US&langu
age=EN&mppi=0&mppos_list=0&mpst=0&ppath=cpmacpl060204a
&pageregion=playerbutton&pcode=rn&opage=realhomespma
cbb&src=realhome_spmac_bb_0_1_1_0_0_20>
Okay, so here's a question from a new to mac guy. Many issues on old PC with real player and Media Player not getting along. Eventually had to delete real player and had to reinstall windows. I would like to avoid third party software if possible and stick with Quicktime. How do I install the mime plug in without installing Real Player?
17" iMac Mac OS X (10.4.8) intel duo
17" iMac Mac OS X (10.4.8) intel duo

Problems with Clone Tool / Content Aware Scaling in CS4 Mac

I've been using PS for about 1 year and a half. Sort of an Advanced beginner. One of the things I love is the clone tool. Since I've upgraded to CS4 I've had nothing but problems with the Clone tool. When I go over an area it doesn't show anything and the either makes the adjustments after a long delay or it goes black and then comes back with the adjustment. Sometimes when I'm dragging the brush the whole picture goes away replaced by a smear of color noise. It really makes the tool unusable. In many cases I've gone back to CS3.
I also have similar problems with the content aware scaling. Never been able to get it to work. Basically some of the nicest new features of CS4 are worthless for me. Tried looking at Adobe solution and searching the forums but I haven't seen any exactly similar problems of solutions.
Any help appreciated. I have a white 24' Intel Mac with a 2.33 GHz Intel Core 2 Dual with 3GB RAM.
Alan

As always the various User Forums are fantastic. Adobe (and other) get everyone to do their Tech Service for them. Thanks for the help.
So, two new pieces of info. When I disable Open GL everything works fine. (Sorry about the TIFF, I just didn't catch it) So in essence this solves my problem.
Also PS CS4 works perfectly on my new Aluminum MacBook. So clearly it is an issue with the video board on my iMac.
This brings me to the wrap-up question. Should PS CS4 theoretically work with Open GL on my iMac or is it a know problem with CS4 and older graphics boards? I'm assuming my board supports Open GL.
This is the Profiler data on the Graphics Card
Chipset Model: NVIDIA GeForce 7600 GT
Type: Display
Bus: PCIe
PCIe Lane Width: x16
VRAM (Total): 256 MB
Vendor: NVIDIA (0x10de)
Device ID: 0x0391
Revision ID: 0x00a1
ROM Revision: 3021
Displays:
iMac:
Resolution: 1920 x 1200
Depth: 32-bit Color
Core Image: Hardware Accelerated
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Built-In: Yes
Some of the Open GL features are nice and wouldn't mind having them but not worth buying a new Mac for. So the questions is: Is the some kind of upgrade / driver I can load to solve this problem.
Again Thanks for the help

Problems with http header "Content-Location"

Does anyone know how to override the
"Content-Location" http header. We are having issues with search engines and this header being returned from Apache/oc4j. In a nutshell, I have a site that uses the
Struts framework, where the actual urls submitted would be for example
(http://mysite/home.do), where ".do" is just a servlet mapping. When we have
tried to follow the one link that has been spidered, it actually contains
the full path that appears in the "Content-Location" header (i.e.
http://mysite/web-inf/jsps/bogus.jsp) which in this case can't even be
accessed. The feedback we get from third-party utilities that try to spider
the site is that it is stopping because it has already indexed "bogus.jsp",
which in reality will always appear since it is a template, where the actual
urls will be different as is above.
Because the "Content-Location" header is being returned to any
client hitting the site, search engine spiders stop indexing at the first page because the value in "Content-Location" is the same.
Solutions tried:
mod_headers in Apache - have tried "Header unset"
HttpServletResponse.setHeader()
Any help would be appreciated

Hi there,
i'm having a similar problem to this when trying to run some web page speed optimisation software...
i think the issue also causes problems with the Opera browser (although this may have been fixed in the latest version).
anybody any ideas how to stop the header being sent in the response?
many thanks,
Andy

I have problem with safari web content show up that not responding

Hi apple support and other member
My name is Oliver ..I using MacBook Pro (15-inch, Mid 2012) | Processor 2.6 GHz Intel Core i7 | 8 GB 1600 MHz DDR3 | and update to OS X yosemite version 10.10.2
I have a problem with my safari it show up that web content is not responding..What should i do because it happen all most every time in open up safari ? Pls help and give a advice ?
Thank you
Oliver Chu

Hello, Oliver Chu.
Thank you for visiting Apple Support Communities.
I understand that you are experiencing an issue with the performance of Safari. I would start with clearing Safari History and Website Data. If the issue persists, you may need to take a look at the troubleshooting steps in the second article.
Reset Safari
Unsupported third-party add-ons may cause Safari to unexpectedly quit or have performance issues
Cheers,
Jason H.

Problem with cropped WPF content in an ElementHost

Similar Messages

Maybe you are looking for