Problem with Current Tab Image property of tabs
Hello. I am having trouble changing my tab entries to appear as images. When editing a standard tab I went to the section labeled "Images". Then I put values in for "Current Tab Image" and "Non Current Tab Image", and after running the page the images do not appear. The tabs still appear as text. Does anybody know what the problem is?
The paths that I tried to use for the images are:
button.gif
#WORKSPACE_IMAGES#button.gif
Any help would be greatly appreciated.
Thank you,
-Jason
Never mind, I figured out the solution.
I'll explain what needed to be done for those of you that come across the same problem.
I had to edit the Page Template, and go to the section "Standard Tab Attributes". All I had to do was change the text "#TAB_LABEL#" to "#TAB_IMAGE#"
Similar Messages
-
hi! i'm having a problem with my safari as unnecessary new tabs keeps opening overtime i open some link! is anyone experiencing something like this !
There is no need to download anything to solve this problem.
You may have installed one or more of the common types of ad-injection malware. Follow the instructions on this Apple Support page to remove it. It's been reported that some variants of the "VSearch" malware block access to the page. If that happens, start in safe mode by holding down the shift key at the startup chime, then try again.
Back up all data before making any changes.
One of the steps in the article is to remove malicious Safari extensions. Do the equivalent in the Chrome and Firefox browsers, if you use either of those. If Safari crashes on launch, skip that step and come back to it after you've done everything else.
If you don't find any of the files or extensions listed, or if removing them doesn't stop the ad injection, ask for further instructions.
Make sure you don't repeat the mistake that led you to install the malware. It may have come from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad would probably have included a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If you ever download a file that isn't obviously what you expected, delete it immediately.
Malware is also found on websites that traffic in pirated content such as video. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Still in System Preferences, open the App Store or Software Update pane and check the box marked
Install system data files and security updates (OS X 10.10 or later)
or
Download updates automatically (OS X 10.9 or earlier)
if it's not already checked. -
Problem with displaying BLOB images on JSP page using a servlet
hi. I have a big problem with displaying BLOB images using JSP. I have a servlet that connects to the oracle database, gets a BLOB image , reads it, and then displays it using a BinaryStream. The problem is , this works only when i directly call that servlet, that is http://localhost:8080/ImageServlet. It doesn't work when i try to use that servlet to display my image on my JSP page (my JSP page displays only a broken-image icon ) I tried several coding approaches with my servlet (used both Blob and BLOB objects), and they work just fine as long as i display images explicitly using only the servlet.
Here's what i use : ORACLE 10g XE , Eclipse 3.1.2, Tomcat 5.5.16 , JDK 1.5
here is one of my image servlet's working versions (the essential part of it) :
BLOB blob=null;
rset=st.executeQuery("SELECT * FROM IMAGES WHERE ID=1");
while (rset.next())
blob=((OracleResultSet)rset).getBLOB(2);
response.reset();
response.setContentType("image/jpeg");
response.addHeader("Content-Disposition","filename=42.jpeg");
ServletOutputStream ostr=response.getOutputStream();
InputStream istr=blob.getBinaryStream(1L);
int size=blob.getBufferSize();
int len=-1;
byte[] buff = new byte[size];
while ((len=istr.read( buff ))!=-1 ) {
ostr.write(buff,0,len);
response.flushBuffer();
ostr.close(); and my JSP page code :
<img src="/ImageServlet" border="0" > If you could just tell me what i'm doing wrong here , or if you could show me your own solutions to that problem , i would be very greatful ,cos i'm realy stuck here , and i'm rather pressed for time too. Hope someone can help.I turns out that it wasn't that big of a problem after all. All i had to do was to take the above code and place it into another JSP page instead of into a servlet like i did before. Then i just used that page as a source for my IMG tag in my first JSP. It works perfectly well. Why this doesn't work for servlets i still don't know, but it's not a problem form me anymore . Ofcourse if someone knows the answer , go ahead and write. I would still appriceatte it.
here's the magic tag : <img src="ImageJSP.jsp" border="0" > enjoy : ) -
DW CS3 problem with PNG-8 images in Design View?
DW CS3 (build 3481) on XP seems to have problems with PNG-8 images, specifically trying to display them in design view.
I had a very simple image that was able to be exported by Fireworks CS4 as PNG-8 using 4 colors (no transparency) for a tiny file size under 250 bytes.
DW could not display it at all, or even recognize it, reporting it was 0 x 0 in size. I published the page anyway, and it looked fine in the browser.
I upped the number of colors to 32, and DW could then display it in design view in the page I was working on.
I'm still having problems with other PNG-8 images. The attached file "temp.jpg" is a screenshot showing part of the design view in DW.
The smaller image on the left of the banner is "58_certificate_of_discharge.png" (attached), and the larger image below is used as the background of the DIV containing the form,"compassbk.png" (also attached).
These images all look fine in the browser, but terrible in DW.
I'm stumped as to why.
Thanks in advance.According to a different discussion, the images that are stuck as "Queued" are showing a bug in the virus scanning on the forums.
Now trying the recommended 'camera icon' method...
Looks like it worked.
Now compare what it looks like in DW CS3 in the design view:
It's a 16 color PNG-8 made in Fireworks CS4 with no transparency, size is 113 x 58, ending up at 1.71K.
If this is a repeatable problem in CS3, is there any hope of it being resolved, or am I stuck with upgrading to CS4 as my only option (assuming it's fixed in CS4)?
Thanks. -
Problem with current scope forum
I have searched my computer for trojan downloader and it was found and removed however the search said having a problem with current scope.
Skin222Hello Skin222,
Your problem is beyond the scope of support. This forum is for feedback and questions related to the current versions of the ADO.NET Entity Framework and LINQ to Entities including object-relational mapping and entity data modeling.
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Hi
DECLARE @XMLA nvarchar(3000)
, @DateSerial nvarchar(35);
-- Change date to format YYYYMMDDHHMMSS
SET @DateSerial = CAST(GETDATE() AS DATE);
--SELECT @DateSerial
Set @XMLA =
N' <Batch xmlns="http://schemas.microsoft.com/analysis services/2003/engine">
<ErrorConfiguration xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddl2="http://schemas.microsoft.com/analysisservices/2003/engine/2"
xmlns:ddl2_2="http://schemas.microsoft.com/analysisservices/2003/engine/2/2" xmlns:ddl100_100="http://schemas.microsoft.com/analysisservices/2008/engine/100/100" xmlns:ddl200="http://schemas.microsoft.com/analysisservices/2010/engine/200"
xmlns:ddl200_200="http://schemas.microsoft.com/analysisservices/2010/engine/200/200">
<KeyErrorLimit>-1</KeyErrorLimit>
<KeyNotFound>IgnoreError</KeyNotFound>
<NullKeyNotAllowed>IgnoreError</NullKeyNotAllowed>
</ErrorConfiguration>
<Parallel>
<Process xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddl2="http://schemas.microsoft.com/analysisservices/2003/engine/2" xmlns:ddl2_2="http://schemas.microsoft.com/analysisservices/2003/engine/2/2"
xmlns:ddl100_100="http://schemas.microsoft.com/analysisservices/2008/engine/100/100" xmlns:ddl200="http://schemas.microsoft.com/analysisservices/2010/engine/200" xmlns:ddl200_200="http://schemas.microsoft.com/analysisservices/2010/engine/200/200"
xmlns:ddl300="http://schemas.microsoft.com/analysisservices/2011/engine/300" xmlns:ddl300_300="http://schemas.microsoft.com/analysisservices/2011/engine/300/300">
<Object>
<DatabaseID>MultidimensionalProject5</DatabaseID>
<CubeID>giri</CubeID>
<MeasureGroupID>Fact Internet Sales</MeasureGroupID>
</Object>
<Type>ProcessFull</Type>
<WriteBackTableCreation>UseExisting</WriteBackTableCreation>
</Process>
</Parallel>
</Batch>';
EXEC (@XMLA) At SHALL-PCAdventureWorksDw ;
iam executive the query when iam getting below error.
[Execute SQL Task] Error: Executing the query "DECLARE
@XMLA nvarchar(3000)
, @DateSerial nvarch..." failed with the following error: "Incorrect syntax near '-'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set
correctly, or connection not established correctly.
how to solve this error;
please help meWhat are you trying to do? What sort of data source is SHALL-PCAdventureWorksDw?
When you use EXEC() AT, I would execpt to see an SQL string to be passed to EXEC(), but you are passing an XML string????
If you explain why you think this would work in the first place, maybe we can help you.
Erland Sommarskog, SQL Server MVP, [email protected] -
Problems with current version of AIR. Won't load and also can't uninstall
I have recently purchased a new Mac and loaded the most recent version of AIR but now when I try to run it I keep getting the following message
This application requires a version of Adobe AIR which cannot be found.
Please download the latest version of the runtime from
http://www.adobe.com/go/getair,
or contact the application author for an updated version.
I am also getting this message when I try and run the uninstaller so I can I can try and re-install.
Does anyone have any suggestions?
Thanks.I had AIR 3 on my MacBook Pro before I updated it to Lion. I use AIR 3 to run McMillan Study guides Master your CDCs. when I updated my mac to lion and tried to run the application the application couldn't find AIR 3 on my mac. So I uninstalled it and tried to install it again. when I tried to install it the installer program doesn't open. please help me this program is crucial for my upgrade training.
From: lisachao <[email protected]>
To: A1C PD <[email protected]>
Sent: Monday, October 24, 2011 12:35 PM
Subject: Problems with current version of AIR. Won't load and also can't uninstall
Re: Problems with current version of AIR. Won't load and also can't uninstall created by lisachao in Installation Issues - View the full discussion
Is this the error you are getting when you are installing AIR 3.0? Or is this the error you are getting after you've already installed AIR 3.0 and attempting to run AIR applications? If it's the latter, which applications are you trying to run? Can you please send us your logs so that we can investigate further? Thanks!
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/3987820#3987820
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/3987820#3987820. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Installation Issues by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746. -
Hi .
I was creating the pass the values t in temp tables though s sis package vs2012 .
First I was taken on executive SQL TASK.
IN EXCUTIVE SQL TASK . I was write the stored proce:
Sp;
reate procedure USP_GETEMP2333
AS
begin
Select eid,ename,dept,salary from emp
end;
create table #temp(eid int,ename varchar(20),dept varchar(20),salary int)
insert into #temp
exec USP_GETMP02333
go.
It was executive correctly.
I was taken another sequence container. In the sequence container iam creating one executive sql
In 2<sup>nd</sup> excutive sql task: sql statements is
if object_id('emp_fact_sal') is not null
drop table emp_fact_sal
select eid,ename as emp_name,sal_bar=
case when salary<=5000 then 'l'
when salary >5000 and salary<=7000 then 'm'
else
'h'
end
into emp_fact_sal from #temp.
and one falt flies it was taken to designation .
iam changing all connection properties:
in oldeb connection:
in excutive sal task properties .
delay validation is true,
and retain connection maner is also true,
and package mode is 64 bit is false.
But iwas excutive in 2<sup>nd</sup> excutive ql task .
Iam getting this type of errors,
[Execute SQL Task] Error: Executing the query " if object_id('emp_fact_sal') is not null
drop ta..." failed with the following error: "Invalid object name '#Temp'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established
correctly.
Please help meArthur suggestion works but you shouldnt even be doing this on a SQL Task.
Use a data flow task. You'll have better control over the data that is being transfered and get better performance because no staging table will be used.
Just because there are clouds in the sky it doesn't mean it isn't blue. But someone will come and argue that in addition to clouds, birds, airplanes, pollution, sunsets, daltonism and nuclear bombs, all adding different colours to the sky, this
is an undocumented behavior and should not be relied upon. -
Another problem with using canvases and scrollviewers in tab
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Windows;
using System.Windows.Controls;
using System.Windows.Data;
using System.Windows.Documents;
using System.Windows.Input;
using System.Windows.Media;
using System.Windows.Media.Imaging;
using System.Windows.Navigation;
using System.Windows.Shapes;
namespace WPFDynamicTab
/// <summary>
/// Interaction logic for MainWindow.xaml
/// </summary>
public partial class MainWindow : Window
private List<TabItem> _tabItems;
private TabItem _tabAdd;
// private Canvas canvas1;
public MainWindow()
try
InitializeComponent();
// initialize tabItem array
_tabItems = new List<TabItem>();
// add a tabItem with + in header
_tabAdd = new TabItem();
// canvas1= new Canvas();
_tabAdd.Header = "+";
_tabAdd.MouseLeftButtonUp += _tabAdd_MouseLeftButtonUp;
_tabItems.Add(_tabAdd);
this.AddTabItem(); // add first tab
// bind tab control
tabDynamic.DataContext = _tabItems;
tabDynamic.SelectedIndex = 0;
catch (Exception ex)
MessageBox.Show(ex.Message);
private TabItem AddTabItem()
int count = _tabItems.Count;
// create new tab item
TabItem tab = new TabItem();
tab.Header = string.Format("Tab {0}", count);
tab.Name = string.Format("tab{0}", count);
tab.HeaderTemplate = tabDynamic.FindResource("TabHeader") as DataTemplate;
// add controls to tab item, this case I added just a canvas
ScrollViewer scrollview1 = new ScrollViewer();
Canvas canvas1 = new Canvas();
canvas1.Name = "canvas1";
// XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Canvas_Paint(ref canvas1); // Canvas_Paint defines the background color of "canvas1"
scrollview1.Height=200;
scrollview1.VerticalAlignment = VerticalAlignment.Center;
canvas1.Height=400+400*count;
scrollview1.Content = canvas1;
tab.Content = scrollview1;
//YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY
// insert tab item right before the last (+) tab item
_tabItems.Insert(count - 1, tab);
return tab;
private void _tabAdd_MouseLeftButtonUp(object sender, MouseButtonEventArgs e)
TabItem newTab = this.AddTabItem();
// clear tab control binding
tabDynamic.DataContext = null;
// bind tab control
tabDynamic.DataContext = _tabItems;
tabDynamic.SelectedItem = newTab;
private void Canvas_Paint(ref Canvas canvas1)
int count = _tabItems.Count;
switch (count)
case 0:
canvas1.Background = Brushes.Green;
break;
case 1:
canvas1.Background = Brushes.Red;
break;
case 2:
canvas1.Background = Brushes.Blue;
break;
case 3:
canvas1.Background = Brushes.Yellow;
break;
case 4:
canvas1.Background = Brushes.Brown;
break;
case 5:
canvas1.Background = Brushes.Orange;
break;
case 6:
canvas1.Background = Brushes.Olive;
break;
default:
break;
private void tabDynamic_SelectionChanged(object sender, SelectionChangedEventArgs e)
// this is a dummy method
and the xaml
<Window x:Class="WPFDynamicTab.MainWindow"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
Title="Dynamic Tab" Height="300" Width="527" WindowStartupLocation="CenterScreen">
<Grid>
<TabControl Name="tabDynamic" ItemsSource="{Binding}" SelectionChanged="tabDynamic_SelectionChanged">
<TabControl.Resources>
<DataTemplate x:Key="TabHeader" DataType="TabItem">
<DockPanel>
<TextBlock Text="{Binding RelativeSource={RelativeSource AncestorType=TabItem }, Path=Header}" />
</DockPanel>
</DataTemplate>
</TabControl.Resources>
</TabControl>
</Grid>
</Window>
The program does the job but there are 2 questions. I am using a scrollviewer and each time the tab increases the canvas size increases and this is reflected in the scrollview bar getting shorter.
Question 1)
I set the scrollview1 height to 200 ,which was obtained by trial and error, increasing causes the extents to go outside the box etc,
the window height was 300 , is it possible to automatically set the scrollviewer height.
Question 2)
Is it possible to put the canvas and scrollviewer into the XAML I tried but failed
Note: the relevent code to the above questeions is between XXXXX... and YYYY...>>the window height was 300 , is it possible to automatically set the scrollviewer height.
You should not specify an explicit height if you want an element to fill the available space. Just set the VerticalAlignment property to Strecth (which is the default value for a ScrollViewer:
Canvas_Paint(ref canvas1); // Canvas_Paint defines the background color of "canvas1"
scrollview1.VerticalAlignment = VerticalAlignment.Stretch;
canvas1.Height = 400 + 400 * count;
scrollview1.Content = canvas1;
tab.Content = scrollview1;
//YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY
// insert tab item right before the last (+) tab item
_tabItems.Insert(count - 1, tab);
return tab;
>>Is it possible to put the canvas and scrollviewer into the XAML I tried but failed
Well, you could define the ScrollViewer, i.e. the root element, as a resource and then add access it from the AddTabItem() method like this:
<Window x:Class="WPFDynamicTab.MainWindow"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
Title="Dynamic Tab" Height="300" Width="527" WindowStartupLocation="CenterScreen">
<Window.Resources>
<ScrollViewer x:Key="sv" x:Shared="false">
<Canvas Height="800">
</Canvas>
</ScrollViewer>
</Window.Resources>
<Grid>
<TabControl Name="tabDynamic" ItemsSource="{Binding}" SelectionChanged="tabDynamic_SelectionChanged">
<TabControl.Resources>
<DataTemplate x:Key="TabHeader" DataType="TabItem">
<DockPanel>
<TextBlock Text="{Binding RelativeSource={RelativeSource AncestorType=TabItem }, Path=Header}" />
</DockPanel>
</DataTemplate>
</TabControl.Resources>
</TabControl>
</Grid>
</Window>
private TabItem AddTabItem()
int count = _tabItems.Count;
// create new tab item
TabItem tab = new TabItem();
tab.Header = string.Format("Tab {0}", count);
tab.Name = string.Format("tab{0}", count);
tab.HeaderTemplate = tabDynamic.FindResource("TabHeader") as DataTemplate;
// add controls to tab item, this case I added just a canvas
ScrollViewer scrollview1 = this.Resources["sv"] as ScrollViewer;
Canvas canvas1 = scrollview1.Content as Canvas;
canvas1.Name = "canvas1";
Canvas_Paint(ref canvas1); // Canvas_Paint defines the background color of "canvas1"
scrollview1.VerticalAlignment = VerticalAlignment.Stretch;
canvas1.Height = 400 + 400 * count;
scrollview1.Content = canvas1;
tab.Content = scrollview1;
// insert tab item right before the last (+) tab item
_tabItems.Insert(count - 1, tab);
return tab;
It may not provide that much benefits in this scenario though since you are setting the height and the background of the Canvas dynamically but it is indeed possible.
Hope that helps.
Please remember to close your threads by marking helpful posts as answer and then start a new thread if you have a new question. -
how can I fix this problem ? I cant close the safari with command Q anymore and the tabs don't have the exit botton that used to be on left corner !
Use cmnd+w to close the tab.
-
Firefox remembers history but doesn't remember closed tabs, sessions.
It happened after updating Fox to v. 19.0.2 on one computer.
In Firefox Options is set Use Custom Settings For History, everything is checked except Always Use Private Browsing Mode. So I am not in private browsing.
When I press on Undo Closed Button nothing happens & in session manager Save Session Button is greyed out. I've tried installing other add-ons that can remember tabs. tried to disable/reinstall these 2 add-ons. Did't help. On my 2nd computer I have same add-ons, same settings and they are working normally. on 3rd computer undo closed tabs works also. How to fix this? I decided to ask before doing Firefox Reset...
Sync is a separate problem. It works, but quite often it logs me out of Sync account. Then I can log in only using long recovery key and password (choosing option I don't have device with me because it does not accept keys for pairing device.)
Thanks for reading.I have exactly the same settings in Options (in both computers)
for history, these 2 add-ons and all other stuff in Options. The only difference is that on 1 pc sessions can be saved and closed tabs can be reopened, on other main pc they stopped to work. + no any other add-on that does similar things works on this pc.
It is also interesting that I can reopen closed visited sites from History Panel, but not by pressing the Button. For now I only manually bookmark links to a temporary folder.
Recently (some 2 month ago) I pressed x and Firefox closed all tabs without saving them without displaying save & quit pop up.
so I changed 4 settings in about.config
browser.tabs.warn on close true
browser.warn on quit true
browser.warn on restart true
browser.show.quit warning true
but the problem with sessions appeared only 1 week ago.
So I guess the problem is not with the History settings or other settings. Seems that something responsible for button or for storing info about tabs/sessions got corrupted. :( -
Had problem with DSL, now have only one tab with favicon matching that tab.
After a storm I had a problem with my U-Verse DSL. I lost access and got a message that it may be due to a problem with the filters on my phones, fax or satellite box. I disconnected all the items that had filters. I was then able to click on a link that AT&T had sent on the message and I got a response, I previously could not get a response because I had no connection. I got pack to the pages on all my tabs by hitting the back arrow on each one. I now have only one tab with favicon matching this WEB site for that tab, the rest all have the AT&T globe. I tried refresh and also opening a new tab and then going to one of the sites.
This problem is on a different PC that the one I am on now. It has version 21, and is Window 7 Home Premium. I have pasted the trouble shooting info from that PC.Hello,
Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us!
Thank you. -
Problem with placing dynamic images.
I have a 800x600 file. It is being used for a PhotoSlide
show.
The images are displayed dynamically, as external files.
Some of the photos will be taken 1 hour before the
presentation, so I have
it set up to display img001.jpg, img002.jpg, img003.jpg as
external files.
Once the photos are taken, they'll be renamed, and placed in
the appropriate
folder, so that they'll appear in the presentation, without
having to
republish the authorware file.
I have the display icons for the images set to display the
image at 400,300,
which will center the image on-screen.
The problem is that when i change the images out, from a
verticle to a
horizontal picture, then run the piece, but image's placement
on screen
changes.
So how can I set the linked external file to ALWAYS display
centered on
screen, no matter the orientation, or size of the picture.That doesn't change anything from when I had X = 400 and
Y=300.
The images are linked externally.
This is going to be a photo slideshow to be shown after a
wedding, during
the reception. I will NOT be there to administer this, or to
republish the
authorware files. So at the final segment of the slideshow,
we'll be showing
several photos taken earlier, at the wedding.
I have it set up to display 5 photos from the wedding. They
are grabbed
externally, but Authorware looking for img01.jpg - img05.jpg.
The problem is that the image's placement on-screen changes
when a different
size image is put in place.
For example, if i publish the authorware file, and i was
using a 720 x 480
image, everything works fine. But if i replace the external
image with a 480
x 720 image, the placement on screen is no longer set for the
center of the
image to appear at the dead center of the screen (400,300). I
need it to
work like this, since I don't know if the wedding photos
being added will be
set to portrait or landscape.
"Steve Howard **AdobeCommunityExpert**"
<steve@$NoSpam$tomorrows-key.com>
wrote in message news:e4t1rv$iv1$[email protected]..
>
>> So how can I set the linked external file to ALWAYS
display centered on
>> screen, no matter the orientation, or size of the
picture.
>
>
>
> Set the display icon Positioning property to On Screen.
Set the Initial X
> location to WindowWidth/2
> Set the Initial Y location to WindowHeight/2
>
>
> Steve
>
>
> --
> ACE - Adobe Community Expert, Authorware
> My blog -
http://stevehoward.blogspot.com/
> Authorware tips -
http://www.tomorrows-key.com -
I am having problems with a YTD style measure and I don't know how to deal with it.
I need to sum from one date - the same day each year - 1st april - to the current week. The current week is defined as the last data build date. For previous years, the cumulative is from the 1st april to the parallel week to the current week.
There is an indicator in the database table that shows what week is the current week.
How should I store an attribute in a hierarchy that indicates it is the current week ? As a property ?
How would I sum from the 01st april to a current week using an attribute stored in a property in the Date dimension ?
My Date dimension is daily and based on calendar weeks and calendar months.Hi ,
Does the week is part of the hierarchy ? if so, you want to have range between two days, the 01/04 and the last day for that relevant week . Something like ..
{[Date].[Calendar].[Day].&[20130401]:ClosingPeriod([Date].[Calendar].[Day], MyRelevantWeek)}
You can achieve the relevant week by filtering the weeks without the right property : Filter([Date].[Week].[Week] , [Date].[Week].CurrentMember.properties("RelevantWeek") = 1) .
If you want to have a dynamic 1st to April for the relevant year, you'll need to build this member with the current year : strtomember("[Date].[Calendar].[Day].&["+str([Date].[Year].Currentmember.properties("key"))+"0401]")
Hope it helps :)
Regards, David . -
Problems with the background image in IE
Hi I've been optimizing some pages for the different browsers in Dreamweaver CS4. They all work fine in Safari, Firefox and Opera, Internet Explorer is, however not showing the background image I have selected. I can't for the life of me see what's going wrong! Any help wopuld be appreciated. here is the code on my index page which I built from a template. I don't know if it's the editable areas that are going wrong!
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
<!-- InstanceBeginEditable name="doctitle" -->
<title>test site</title>
<!-- InstanceEndEditable -->
<link href="oneColFixCtrHdr.css" rel="stylesheet" type="text/css" />
<style type="text/css">
<!--
body {
background-repeat: repeat-x;
background-image:url(file:///Macintosh HD/Users/me/Documents/websites/face_divorce/test/images/test_back.png);
.oneColFixCtrHdr #container {
width: 770px;
margin: 0 auto;
border: 0;
padding: 0;
.oneColFixCtrHdr #header {
text-align: centre;
border: 0;
padding: 0;
.oneColFixCtrHdr #header h1 {
<img src="../images/test_logo.png"
margin: 0; /* zeroing the margin of the last element in the #header div will avoid margin collapse - an unexplainable space between divs. If the div has a border around it, this is not necessary as that also avoids the margin collapse */
padding: 10px 0; /* using padding instead of margin will allow you to keep the element away from the edges of the div */
font-size: x-large;
text-align: right;
.oneColFixCtrHdr #mainContent {
padding: 0;
.oneColFixCtrHdr #footer p {
margin: 0; /* zeroing the margins of the first element in the footer will avoid the possibility of margin collapse - a space between divs */
padding: 10px 0; /* padding on this element will create space, just as the the margin would have, without the margin collapse issue */
font-family: Verdana, Geneva, sans-serif;
color: #6699cc;
font-size: 9px;
font-style: normal;
line-height: normal;
font-weight: lighter;
text-align: center;
-->
</style>
<!-- InstanceBeginEditable name="head" -->
<meta name="Description" content="facedivorce.com.com is an online resource tool to help guide you through the various stages of divorce. Simply click on before, during or after divorce to find everything you could ever need to do with divorce.
" />
</head><meta name="keywords" content="test
" />
<!-- InstanceEndEditable -->
<body class="oneColFixCtrHdr">
<div id="container">
<div class="oneColFixCtrHdr" id="header">
<table width="740" border="0" align="center">
<tr>
<td border="0" height="38" ></td>
<td align="right" valign="bottom"><!-- InstanceBeginEditable name="HeaderLinks" -->
<p class="TextButtons"><a href="index.html" class="TextButtons">Home</a> <a href="featuredcompany.html" class="TextButtons">Featured Company</a> <a href="youngpeople.html" class="TextButtons">Young People</a> <a href="andmore.html" class="TextButtons">And More</a> <a href="blog/index.html" class="TextButtons">Blog</a></p>
<!-- InstanceEndEditable --></td>
</tr>
<tr>
<th height="48" align="left" valign="bottom">
<h1><a href="index.html" title="test"><img src="images/test_logo.png" alt="test" width="245" height="46" border="0" align="left" /></a></h1>
</th>
<td align="right" valign="bottom"><!-- InstanceBeginEditable name="HeaderButtons" --><a href="#"><img src="images/facebook-logo.png" alt="FaceBook Button" width="48" height="48" border="0" align="bottom" /></a> <a href="#"><img src="images/twitter_square.png" alt="Twitter Button" width="48" height="48" border="0" align="bottom" /></a><a href="#"><img src="images/blogbutton.png" alt="Blog Button" width="49" height="47" border="0" align="bottom" /></a> <!-- InstanceEndEditable --></td>
</tr>
</table>
<!-- end #header -->Hi
The fact you are using a Mac is why both myself and JCellini assumed you where using a pre IE7 version.
But the code you are using to test in IE will cause a problem with any 'virtual machine' such as crossover, because it cannot reference anything outside its own assigned section of the drive, and referencing the png in the way you are would be for it an invalid reference, it also would not work in any browser when you uploaded the site.
Change - background-image:url(file:///Macintosh HD/Users/myname/Documents/websites/test/Test/images/test_back.png);
To - background-image:url(images/test_back.png);
But if the region is not editable I would suggest you temporarily make it so, externalize your css to a css file, insert a link to the external css file in your head content, then lock the region once again. This way you will always be able to edit your css without worrying about 'locked regions'.
PZ
www.pziecina.com
Maybe you are looking for
-
ABAP Dump and JOb cancelled in BW
Hi to all, I do have one job cancelled in BW: BI_SAGR45WPN8MGGSB8EPABT8U5K3B6B Job Log: DROP INDEX "/BIC/F100300~090" SQL-END: 01.06.2007 05:02:07 00:00:00 ABAP/4 processor: SAPSQL_INVALID_TABLENAME Job cancelled I think this is an aggregation job.
-
TO clarify...When I open ITunes, my acct info in the menu of options on the left can be accessed even without signing in
-
Purchased storage not available
I just purchased more iCloud storage (the 10GB plan) but it's still reading that I only have 5GB available. Do I have to activate this plan in some way?
-
IPad video storage usage does not match what iTunes displays
When viewing the storage usage for my iPad mini through iTunes, I noticed "Other" was at 19.45 GB. I thought this was a little strange since I am somewhat familiar with the type of data that is categorized under "Other". When I checked the storage us
-
my pc with windows 7 was working up until just before x-mas now i can not use firefox to get my email or any thing else that requires a password. the screen that comes up does not allow or have a place to put in the password most other pages are ok