Problem with Custom idoc sending

Hi Experts,
We have created partner profile and port for receiver system, our idoc is Z (custom) idoc.
but the problem is here, when we are sending that idoc from R/3 system, it is in Yellow position with message number 30. How we can solve this problem.
Is there any other configuration required for Z (Custom) idoc.
Please help,
Regards,
Study SAP

hi check this...
http://www.****************/Tutorials/ALE/CustomIDOC/Create.htm
check the process followed or not if u miss any steps then it will give warning....that is not a problem..see one thing after creating the idoc u need to give the status back to the idoc_status. otherwise it will not show the green message 51...we have to do it if this is the custom idoc ...otherwise if it is a standard one there is nothing to do it will automatically catch the message back.

Similar Messages

PROBLEM IN CUSTOM IDOC CREATION

Hi Friends,
                I'm facing a problem in custom idoc creation plz try to assist me
1.As per the information i have i'm creating segment in we31
for cremas01 idoc.But when i enter the name for segment i'm getting message "Name range Voilation particular name which i had given is not permitted in customer system?
Plz clarify this,and are there any formalities which i should look for before creating custom idoc?
Good answers will be rewarded.
                                                                          Regards,
                                                                           Vinod.

The Problem might be.... with the naming of the segment.
Standard segments should be created with 'E1' and all the custom segments are created using 'Z1' and the name with 8 characters long only is permitted.
Reward Points if useful.

Problem with custom paper size on dot matrix printer

Hi All,
I'm using CR2008 with updated to SP2. I have a problem with custom paper size (W=21; H=14), the CR Viewer show report with custom paper size correctly but when I print it to a dot matrix printer (Epson LQ 300+) the content was rotated to landscape. If print to a laser printer the content was printed correctly. My report was printed correctly by CR10 or previous versions I got this issue when upgraded to CR2008. I aslo tested my computer and printer with orther application like MS Word the printing have no problem with custom paper size.
Thanks for any advice for me.
Han

Looking at the Epson LQ 300+ driver, I see that the latest update is from 2002. In my experience, most matrix printer drivers are not unicode. Crystal Reports is designed to only work with unicode printer drivers. See the [How Printer Driver Options Affect a Report|https://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/a09051e9-721e-2b10-11b6-f9c65c64ef29&overridelayout=true] article, page 6 for details. Also, see [this|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_dev/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do] note.
Finally, see if you can print from the CR designer to this printer and if you get the correct results here.
Ludek

TS3276 I receive a pop up from ICal saying the server does not recognize me user name and password. This started yesterday. I have no problems with receiving or sending emails through Mail

I receive a pop-up from ICal saying the server does not recognize my user name and password for my me.com email address. This started yesterday and occurs about every 5 minutes or so. There are no problems with receiving or sending email through Mail. I did change me email password several days ago but have no problems sending/receiving since then.

I fixed the problem. I opened Preferences in ICal and entered my new password. No more pop-ups

Problem with Delivery IDOC staus 51

Hi all,
I have problem with Delivery IDOC.
An IDOC is sent from the logistics provider with reference to a manually created delivery, which creates another IDOC & another partial delivery.
The second IDOC created then confirms the partial delivery created by the first IDOC.
When IDOC try to confirm this delivery, it goes to status 51 with error " Delivery does not exist".
In some case IDOC was correctly processed & confirmed the delivery.
In some cases it went wrong.
Any ideas regarding this?

Hi Suneel,
It seems there is timing issue between the first IDoc and second IDoc.
When the first IDoc has not yet commit to DB then the second IDoc tries to process with reference to the first IDoc.
Is there any that can distinguish between 1st and 2nd IDocs?
In other word, can you post the second IDoc within minutes delay?
Just my two cents.
Regards,
Ferry Lianto

Problems with multiple idocs in one file ( Inbound file )

HI,
Thanks in Advance for your suggestions.. Highly appreciated.
We have problems with multiple IDocs in one file.
We are using XIB ( Amtrix ) as Middleware to receive the files.
Curretenly When the file contains one IDoc then there is no problem. IDoc is created and everything is ok.
If file contains two IDocs ( for example two messages ORDERS and DELVERY ) then it is creating two IDocs but both IDocs contains ORDERS plus DELIVERY segements information. That is the problem. Some how SAP unable to differentiate the IDocs in the file.. But it knows that how many idocs are there in the file..because it is creating exact number of idocs.
We are using TRFC port ... Do I need to change it to File port..
When we have more than one idoc do we need set any parameter in the file ...

Thanks for the swift response. Always ideas are useful.
As of now , Middleware cannot split the file.
Thing is SAP is creating two Idocs with different message types. Problem is First IDoc contains ORDERS message type but also DELIVERY segments as well. Second IDoc with DELIVERY message tyoe but ORDERS segments as well... This is the problem... I think we are missing some field activation in file for EDIDC record.
As far as I know file port supports the number of IDocs in one file.. Hope TRFC port also supports that

Problems with Custom Paper Size and Address Book

I'm having some trouble printing from Address Book onto a custom paper size. I'm attempting to set up a notecard, and only print one at a time, rather than multiple columns as in the Labels option. The trouble is that when creating this small size, Address Book doesn't recognize it as anything other than a regular sheet of US Letter, and thus prints the address in the middle of the page.
I have no problem printing envelopes, though, which seems odd because they too go in the manual feed for my printer. The notecards are similar width to the envelopes, but only about half the length.
Has anyone else experienced problems with custom paper sizes printing improperly? I'm using an HP 4515 LaserJet, but have access to a few other laser printers. Thanks for any insight

I have had the same problem, and with the same result; Adobe Tech Support can't help or fix, after 15 hours on phone, Level 2 support. It is a software bug Adobe has, and can't seem to fix. I just upgraded to Lightroom CC, and my problem migrated with the upgrade. I print in Photoshop fine.
If you found an answer, I would appreciate knowing how to do it!
Thanks

Problems with custom buttons

I have problems with custom buttons in Captivate 5. The button is not switching from the _up stage to _over stage, but when I click on it the _down stage works fine. It is not a problem with the naming of the buttons. They are all with the same name and in lower case. I have tried with various custom buttons and the problem is the same. There is no problems with the standard buttons from the Adobe Gallery, so it is a bit strange, also strange that it is only the _over stage that causes problems.
The buttons I have made in Adobe Illustrator. Have tried both exporting in png and bmp format. It is the same problem.
Hope someone has some idea as to what can be wrong.

Hi Manish,
I have uploaded the zip file with the button files to Acrobat and mailed you the link.
Look forward to hear if you find a reason or more importantly a solution :-)
Kind regards
Rene

Im having problems with Photobucket..sending my customized photos to friends on myspace. They claim it works for them But the albums freeze and i cannot send HELP...

problem with photobucket..When i get ready to send out comments to myspace from my customized albums..it freezes and im not able to send. They say it works for them and gave me a long line of things to do..I have attempted that..it still doesnt work..Im aggravaded beyond belief..

THANK YOU SO MUCH stussaar!
My Mother did what you said for the Spam and my number was in there about 100 times. She deleted all them. Deleted me as a contact and then rebooted, then she text me and I text her back and I went right into the Spam again. I told her to tell TMobile this so then can maybe help and remove my number from Spam on their end.\
Thanks you so much! you got us 99.999 % the way there!!
I appreciate your help!!!! I hope this worked also for your problem!!
Thanks again!!!
Mike

Problems with Customer Service AND unexplained charges!

I've been with Verizon for I-don't-know-how-many years, and through the years you are bound to have a few problems here and there but some of the problems are just ridiculous! It's also the same reocurring problem!!!!!!!!!!!!!!!! I was with Alltel first, before it was bought out by Verizon. The years I was with Alltel, I didn't have near as many problems. It seems EVERY time I do the smallest change or something to my phone or bill, I get a ridiculous amount of charges that I was NOT aware of, nor told about... EVEN IF I ask "So this isn't going to change my bill, or there will not be any unexpected/unexplained charges that I don't know about?"... BUT not matter how many times I ask... and NO matter how many times I am told "no"... there always is. For example.... last year, I updated and signed a new 2 year contract and purchased the first Driod. Before, my 30 day warranty was up, I was having problems with my Driod, and decided to send it in and get a new one. Before I did this.. I called customer service to make sure there would be no interuption in my bill, and there wouldn't be any unexpect charges, and there would be no difference in anything. I was told there was not, and once I recieved my new phone, just send it in and nothing would be changed. Of course, when I get my bill.. I see I was charged $500 for the new phone. It was explained to me that my credit card was reimbursed (which I never check that card, because I never used it expect to purchase the phone) and that I was recharged for the new phone, since it was a new phone. So I had to fork out the $500 (on top of my bill) and then wait months to get the $100 rebate card. Months after that, I "assumed liablity of my line" because I was on a plan with my family. I decided to have my own line, so I "assumed liability." I was not told that when I did that, I "renewed" my contract date. So I just added 6 more months to my 2 year contract. Was NOT told about that! Then again...... I was recently having problems with my Driod (the screen went black and would not come back on.) I had to turn on an OLD motorola razor, so I would not be without a phone for two days while I was waiting on my phone to come in. As soon as my phone came in, I had my Droid turned back on. I recieved my bill recently, and my bill was $200 over what it normally should be.... so I called in... apparently, when I had my phone replaced, they dropped off my data package and when I recieved my replacement driod, they never put it back on. So I was being charged for alllll my data usage... again I was NOT told about this. I wasn't even aware that they had dropped off my data package, and when/where did they get the authority to do that??? These are just a FEW of the problems that I have had.................................
Does anyone have these reoccuring problems!?

I understand that my bill can be viewed online, and I do view it fairly regularly, so if there are any unexplained charges, I can call Verizon asap. The problem does not come from me not understanding my bill, but from customer service. I have been with Verizon for a very long time, and it is a continuing problem. Where did Verizon get the 'OK' to drop my data package off my plan? Who authorized that?
After calling Verizon and trying to find out the problem, the gentleman told me that when I activated on old phone while I was waiting on my new Droid to arrive, my data package was dropped off and I "should" have been told about that. When I reactiviated my new Droid, I "should" have called and had them restart my data package. I was not aware that when you activate an old phone that data plan is taken off your plan. In all my years of having cell phones, I never make two years with one phone. I have always, at one point, had to turn on an old phone, and my data package has NEVER changed. Why would I have my data package dropped and why would I have to call Verizon to have it restarted. I would never know to do that unless I was TOLD that my data packaged HAD to be re-added when I recieved my new phone, but I was never told of that.
All of that is beside the point, the point is, Verizon was never given the authorization to change my plan. Never. My bill was taken care of and readjusted, and I am thankful for that. It does not change the fact it is always a hassle with Verizon Customer Service and I am always the one having to PROVE that I am not at fault, or that I was NEVER told of certian things. EVERY TIME I HAVE CALLED CUSTOMER SERVICE, I AM TOLD "I'M SORRY, THEY SHOULD HAVE TOLD YOU THAT."
"they should" does not help my bill with the extra armount of charges.

Error with Custom Idoc

Hi All,
I have created a custom idoc for creation of master data in the system. This custom idoc is using a custom function module to process the idocs. In the FM i have used Call transaction method to upload the master data in the sap system. Everything seems to be working fine.
But the problem is that whenever any external system creates more than one idoc, first idoc is posted successfully while others fail with an error message "No status record was passed to ALE by the application.". Please let us know how we can resolve it.
Correct Answers will be rewarded.
Regards,
Sridhar.

Hello
Refer to following thread:
The specified item was not found.
Thanks
Amol Lohade

Problems with posting iDocs from MDM in SAP R3

Hi,
I am an MDM consultant, with limited knowledge about SAP R3.
We send material master data from MDM, via PI to R3 using iDocs.
We are having problems with posting MATMAS, and it seems the problems are with updating already existing materials.
In BD87 we get the following warnings:
The field MARA-ERVOE is not ready for input and was therefore not initialized
The field MARA-ERVOL is not ready for input and was therefore not initialized
The field MARA-FERTH is not ready for input and was therefore not initialized
The field MARA-KZGVH is not ready for input and was therefore not initialized
The field MARA-XCHPF is not ready for input and was therefore not initialized
With the last message being:
No changes made
I have checked the MDM syndicator, and none of these idoc-fields are linked to the MDM repository.
So they are syndicated blank.
If we try to resend the material, it is again stopped and in BD87 I see the same messages.
Please help me understanding how to solve these issues.
Thanks,
Thomas

Hi,
Please refer the below threads which talks about the similar problem
http://scn.sap.com/thread/3180116
http://scn.sap.com/thread/1374222
Generally the basic view of the material to be created first. Then the sales, purchasing and other views to be created.
There are few fields in the other views which gets values from the basic data view.
Regards,
Antony

Problem with HRMD_A06 idoc

Dear All,
I am using the IDOC HRMD_A06 for carrying out various operation on the available HR infotypes.Kindly go thru the below mentioned details for further insight of the problem
1.Scenario:
a.An interface to SAP HR system needs to be built
b.The interface will supply incremental master-data in
form of flat-files
c.An integration broker ,SAP XI will then convert the
flat-files to I-Docs and send I-Docs to SAP HR system
d.The I-Doc chosen for this purpose is HRMD_A.HRMD_A06
e.However this I-Doc is not supporting different
operations on incremental data like modify, delete etc
f.Further validations are also not being supported
g.Also segments for certain info-type records are missing
Example for Delete Operation mode:
Operation Delete: Delete existing infotype record
Expected Result: Only the particular info-type record, as supplied in the I-Doc should be deleted and not the entire personal number with all the info-types
Actual Result: The entire personal Number is deleted.
Is it that the Idoc behaves in this fashion or there is some other flag apart from OPERATION, which needs to be set.
Regards
Vinay

Hi Vinay,
Have you found a solution ?
Because I'm a similar problem by using IDoc HRMD_A06. I have not a segment E1P0021 when I delete the infotype 0021 on an employee. I have only its segment E1PITYP.
Regards
Mickael

Problem with interface - when send the data for PA0002

Hi Gurus,
I am interfacing employees data from one system to another system with all the PA infotypes.
we are using the fuction module " HR_MAINTAIN_MASTERDATA " to upload the master data. Here the problem is, when we send the data - in destination system all the segments have the data correctly . But middle name is not loaded in to the system. Problem with only middle name.
But, here strange thing is, when i resend the idocs it is laoded correctly all the fields with middle name also.
I am unable to figure out the problem .. Please let me know if you have any advise on this ..
Thanking you.
Regards,
Giridhar Pujari

Hi Sikindar,
Technical name is corrent .. and once you resend the idoc, you can't see the problem again.
Regards,
Giridhar Pujari.

Problem with mass IDoc for Material Master

Hi All,
Can anyone suggest a solution to work with mass IDocs for Material master?
We have DEBMDM and CREMDM as mass capable IDocs for Customer and Vendor. How do we get mass Material Master IDocs from R/3 in a single XML file?
Also the standard Material repository supplied with SAP MDM 5.5 SP3 doesn't have any XSD definition for MATMDM. Can anyone throw some light on this problem?
Regards
Pooja

Hello Pooja:
The standard way to do it is to generate a single file containing multiple idocs (And for the sake of performance, I suggest you stick to this technique).
In the case of material master, everything is straight forward. In the case of customer and vendor master, when data flows from R/3 to MDM no idoc conversion needs to be performed by XI.
However, for the case of customer and vendor master, when data flows from MDM to R/3, XI needs to separate the data in CREMDM to CREMAS and ADRMAS in order for R/3 to be able to process the idocs; as well as separate the data in DEBMDM to DEBMAS and ADRMAS.
The good thing is that you do not need to worry about all this mappings and conversions in XI. The only thing you need to do in XI is to import the standard business content for SAP MDM 5.5 into XI.
Hope this helps.
Regards,
Jorge.

Problem with Custom idoc sending

Similar Messages

Maybe you are looking for