Problem with Document Comparison In Adobe Pro 9

I have two similar documents that I need to compare. When I use the compare documents options, it only displays a "Compare Insert" box and does not show any text differences even though it is selected under options. Both documents are scanned pdf's. Please advise what could possibly be wrong. Thanks.

we have the same issue. i think the two documents have to be "tagged" PDFs. usually the program you create the PDF with will tag the document when it creates the PDF. but you can also try to add tags to the PDF from within Acrobat. We haven't had any luck, but that's the advice i got.

Similar Messages

Has anyone in this Forum had problems with installing and running Adobe apps on the new MacPro?

Has anyone in this Forum had problems with installing and running Adobe apps on the new MacPro?
I have been trying to install Photoshop CS6 & CC and Acrobat Pro XI on my Mac Pro (late 2013). I keep getting a 'configuration' error message and wondered if the problem was wide spread.
TIA,
Jerry

Thanks, Martin.
Good to hear someone has had success. The lack of it here is frustrating and depressing.
Thanks again,
Jerry

Problems with Dinamic Link between Premiere pro CC and After Effects CC

I'm having serious problems with dinamic link between premiere pro and after effects, really serious problems that have 2 big projects in trouble (a documentary and a video clip) and I had to redo all the work pipeline to the consumer.
The documentary for a spanish TV was made on CC 2014 and a video clip was made on CC. Both of them with a lot of after effects composition in the premiere pro timeline. Render freeze, a lot of playback issues, and many more problems... Until I decided to remove these links between premiere and after effects and render out all the after effects compositions one by one and insert as clips in premiere pro. 1 week working away with back and fourth.
I've got a huge workstation:
i7 4990
32Gb ram
GTX780 3gb
256 gb system ssd
2 Tb project storage
*All my hardware and software are update.
I know that a lot of folks are on the same huge problem and I want to ask everyone:
How do you save this?
What is your pipeline?
Are there any solution?
Best practice to use dinamic link in a huge project?
Thanks,
Ruben Gimenez.
R&D iceblink.es
www.rambot.es

Thank You, Jim -
Unfortunately that specifically did not work.
Based on another comment sent to me, here is what did.
In PProCC
File > Adobe Dynamic Link > New After Effects Composition
In AECC
From that composition created from PPro, I imported the project (aep) initially created in AECC from another team member. Saved the file.
Back in PProCC
File > Adobe Dynamic Link > Import After Effects Composition
Magic.

Problems with our copy of Adobe Acrobat 7 Professional.

We have two problems with our copy of Adobe Acrobat proffesional which we have recently re installed back on the same PC following so we thought the relevant transfer activation instructions.
The first is that when we first start the program with no file loaded Both Transfer Activation and Activate Acrobat are greyout out. This in tiself is not a problem but it may have a bearing on our real problem.
We have for a few years used Acrobat Proffesional successfully to sign released drawing files which have been 'printed' to a PDF file by a third party printer driver. Recently though when we try to load any of this type of file the Acrobat menu stays greyed out and both Adobe Acrobat and the PDF file are listed in Windows task manager. Acrobat is completely locked up and has to be exited via task manager. If I load PDF files from other sources the abot symptoms accur only briefly then the program menus re activate and the PDF file disappears from task manager. It is as thought our PDF drawing files are failing to complete loading.
Does anyone know how I can find out if our copy of Adobe Acrobat Pro 7.0 is actually activated?
Does anyone know what might have started to prevent out drawing files from loading.
Thanks
Chris

Good point but this one does require activation.
Our real issue is that if we load one of our own drawing filkes, even one previously edited or signed with no problems it now completely locks up Adobe acrobat and we cannot do anything at all in Acrobat.

Problem with documents on iCloud.

I have a problem with documents on iCloud, I can`t use it with Pages on Mac and iOS too, Pages not view any documents and can not approach to save documents and not save new documents to iCloud. Any idea?
Thank you for help.

Hello,
Winston and Shayari,
I have also faced this problem with document on iCloud, I couldn't saved the documents to iCloud,
But I found this article problem posted by Hindi love Shayari San and I found the solution this way:
I signed out, then singed in again renabled the iCloud and it works.
I could do this with the instructions of Winston told to Shayari.
Well, a big thanks from my side.
Veena

I have a problem with Mail on my Macbook Pro. It is configurated with a gmail account, and now I can't access the mail. Is it possible to reboot the account or..? Please help:)

I have a problem with Mail on my Macbook Pro. It is configurated with a gmail account, and now I can't access the mail. Is it possible to reboot the account or..? Please help:)

The question mark means the computer cannot find a bootable volumes so can;t do anything, That, combined with annoying sounds, strongly suggests a failed hard drive.
You can ask a "genius" at an Apple Rtail Store to test it but I'm pretty sure the drive is kaput. I'm hoping you had your data backed up.

I have problem with starting up my Mac Pro ?

Dear ,
I'have a problem with starting up my Mac Pro , please advice me how to start it

This may help.
http://support.apple.com/kb/TS1365
Note: Steps 5 and 6
Step 5
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Best.

Why are there so many problems with the early 2008 Mac Pro ???

Hi everybody out there using Mac Pro's early 2008,
I found out there is a lot of problems with the early 2008 Mac Pro.
My early 2008 Mac Pro has been repaired ones under warranty and now it stopped working again ! Also see under: Mac Pro early 2008 no chime and does not start up. Why is this ????
It worked well for about 2 years and then it just fails and i had this failing issue twice already !!! Is this just a BAD Apple product or how do you think I need to approach this. Let’s face it, these machine don’t come cheap and you at least expect them to work without problems for 4-5 years. What is happening here ???
Cheers, Kavango

go to a black screen after 15 minutes or a couple hours
That is probably an indication that you need to find a new graphics card.
RE: Mac Pro Replacement Graphics cards
1) Apple brand cards,
2) "sold in the Apple store" cards, and
3) "Mac Edition" cards ...
... show all the screens, including Boot up screens, Safe Mode, Installer, Recovery, debug screens, and Alt/Option boot screens. At this writing, these choices include:
1) Apple brand cards:
• Apple-firmware 5770, about US$250** works near full speed in every model Mac Pro, Drivers in 10.6.5
• Apple-firmware 5870, about US$450
2) "sold in the Apple store" cards
• NVIDIA Quadro 4000, about US$1200
• NVIDIA Quadro 5000, about US$2500
3) "Mac Edition" cards -- REQUIRE 10.8.3 or later:
• SAPPHIRE HD 7950 3GB GDDR5 MAC Edition, about US$480** Vendor recommends Mac Pro 4,1
• EVGA GTX 680 Mac Edition, about US$600
The cards above require no more than the provided two 6-pin aux power connectors provided in the Mac Pro through 2012 model. Aux cables may not be provided for third-party cards, but are readily available.
If you are Meet ALL of these:
• running 10.8.3 or later AND
• don't care about "no boot screens" etc AND
• can re-wire or otherwise "work out" the power cabling, THEN:
You can use many more cards, even most "PC-only cards"

Problems with my printer HP Officejet pro 8600 Plus + Yosemite

Hi got problems with my printer HP Officejet pro 8600 Plus till I installed Yosemite it is not recognized so what can I do now.. No new drivers found by HP

Thanks for this AnnRT!
I've spent the best part of a day trying to figure this out. Everything was fine and then one day nothing worked! I have narrowed the issue down to Bonjour via WiFi as everything worked fine via USB, and via IP over WiFi.
I've now set a static IP for the printer and things seem to be working fine again
Thanks!
Chris

Problem with the product activation adobe acrobat 9 standard.

I have a problem with the product activation adobe acrobat 9 standard.
It is a failed hard disk to the pc and was not able to deactivate the license adobe.
Now I replaced the hard drive and reinstalled the software but it tells me that all licenses are used.
Is it possible to unlock the licenses in use?
Thank you.

Adobe can unlock licenses, this is a normal thing for them to do. You must contact them directly, there is no trick or other way.

Problem with document splitting

Hi,
I am encountering a problem with document splitting, where in while doing clearing of down payment against miro invoice profit center of first line item is over ridding profit center of second line item (line items are two different materials in purchase order).

Hi Milind,
Thanks for the reply.
I've done the below configuration and assigned cost/profit center update. It now works for profit center split. It still does not split accordingly per cost center though.
SAP Customizing Implementation Guide > Financial Accounting (New) > Financial Accounting Global Settings (New) > Ledgers >Ledger > Assign Scenarios and Customer Fields to Ledgers
In the below configuration, cost center is not an available option. Unlike the profit center which is available here.
SAP Customizing Implementation Guide > Financial Accounting (New) > General Ledger Accounting (New) > Business Transactions > Document Splitting > Define Document Splitting Characteristics for General Ledger Accounting
The profit center split looks fine now, however the cost center split still is only reflected in the expense items and not on the AP item.
Any ideas on how to actually split the AP line items according to the cost center assignments ?
Edited by: Patrick on May 9, 2011 7:46 AM

Problems with Document Connect

I have a problem with Document Connect. I am unable access office live workspace.
I have been on the help line with microsoft but they were unable to help.
Then I went to an apple store and was informed by one of the sales assistance that Document Connect never worked with the apple. Well what was the point in having it then?

I wish I knew what Document Connect is. I'd bet I could fix it. Not really, but what is it?

What is the problem with fonts changing to myriad pro? Is this problem ever going to be resolved? Its driving me mad!

What is the problem with fonts changing to myriad pro? Is this problem ever going to be resolved? Its driving me mad!

Browser Dog, Amy,
The default font remains Myriad Pro until you change it, either in the RGB/CMYK Startup files or in the preferences, options depending on versions.
Concerning missing font names, I believe this may solve it:
Open System Preferences and go to Accessibility. Next, select Display from the source list along the left, then check the box labelled Reduce transparency.
It was first presented in this post #15 by TheUlser:

I have two problems with my 2012 13" MacBook Pro. 1. Gray screen shows at startup 2. Randomly disconnects from network. Any help will be greatly appreciated.

I have two problems with my 2012 13” MacBook Pro.
Gray screen shows at startup
Randomly disconnects from network.
Any help will be greatly appreciated.

First, open Terminal in your Utilities folder and paste this into the prompt line:
sudo update_dyld_shared_cache
Press RETURN. You will be prompted to enter your admin password which will not be echoed to the screen. Press RETURN again.
Next, boot the computer into Safe Mode.
Next, do the following:
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Problem with an application running Adobe Flex. Tech people say they cannot monitor, track or catch the problem.

Problem with an application running Adobe Flex. tech people say they cannot monitor, track or catch the problem. Application shuts down and give the following erre:
Failure of server APACHE bridge:
No backend server available for connection: timed out after 10 seconds or idempotent set to OFF or method not idempotent.

<moved from Downloading, Installing, Setting Up to Flex>

Problem with Document Comparison In Adobe Pro 9

Similar Messages

Maybe you are looking for