Problem with editing Editable Region - HELP!

My website is www.yucholian.com
I have created a template and have assigned a main body to be
an Editable Region. However, I can't seem to use different fonts,
sizes or styles as I wish. If I go to Text drop down, go to size,
all options are greyed out. Can anyone help?
BTW, I'm using 30 day trial.
I find Dreamweaver to be very finicky. Even something simple
as applying a template that I created, view doesn't update, showing
doubles...
Thanks in advance.

> I find Dreamweaver to be very finicky. Even something
simple as applying
> a
> template that I created, view doesn't update, showing
doubles...
The more you know about HTML, the less you will run into such
things - but I
have to say, I have no idea what you are describing here. It
sounds to me
like user error, but I can't say for sure.
> However, I can't seem to use different fonts, sizes or
styles as I
> wish.
Show me your template, tell me what you are trying to change,
and I'll
explain to you what is happening.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"yucholian" <[email protected]> wrote in
message
news:edk7lr$73m$[email protected]..
> My website is www.yucholian.com
> I have created a template and have assigned a main body
to be an Editable
> Region. However, I can't seem to use different fonts,
sizes or styles as
> I
> wish. If I go to Text drop down, go to size, all options
are greyed out.
> Can
> anyone help?
> BTW, I'm using 30 day trial.
> I find Dreamweaver to be very finicky. Even something
simple as applying
> a
> template that I created, view doesn't update, showing
doubles...
>
> Thanks in advance.
>

Similar Messages

Problem with local editing after update to SP13

Hallo,
we have updated our Enterprise Portla 7.00 to SP13. Now many user have Problem with local editing. The error message is "The download of the document fail".
I know that every PC needs the "Docservice" Active X component installed. The "Docservice" is also installed.
At my PC theres only this problem with "html" documents.
What could be the problem. ?
Please help.
Many thanks
Ronald

We found that there is a problem with the Docservice Active X Component.
If we work in a deeper folder there is a problem with the length of the url. I changed the TEMP Setting
"Setting a different TEMP directory:
In cases that it is problematic to use the standard %TEMP% directory,
setting the environment variable SAPKM_USER_TEMP pinpointing to a
corresponding directory path (e.g.
X:\SHARES\USERS\xxx\CheckedOutDocuments) will be also supported. If the
access to that directory fails the standard %TEMP% directory will be
used as fallback."
I used "C:\TEMP" and now it works....... but this cant be the solution....
thans Ronald

I have a problem with external editing preferences where Photoshop will not launch when I choose "Edit In"...

Hi. I have a problem with external editing preferences. If I add Photoshop as an external editor, it won't launch when selected, if I add it as an additional external editor it will. Why? How can I fix this as I need to use Photoshop and another program as the additional external editor.
I use a Mac running OS X (10.8.5) and PS CS4 and LR 5.7. Any ideas on a fix? Thanks in advance.

I don't know why Photoshop won't start. However, it's possible to create external editor presets using the additional external editor tools. There are instructions on how to do this in the Lightroom help. You could assign Photoshop and create one preset, and then assign another program and create another preset.
I don't know if deleting your preferences would fix the problem or not. It can sometimes fix other problems.
Preference and other file locations in Lightroom 5

Problems with saving edited photos using Photoshop Elements 5.0 on WIndows 8.

Since a week I can not save the edited photos - when I try the communicate: "Caould not complete your request because of a program error" appeares. I had no problem with saving edited photos before, with the same software. My computer runs on Windows 8, 64 bit version. My Photoshop Elements is version 5.0. Where is the problem?

W dniu 2013-06-16 15:36, dj_paige pisze:
>
Yes, I did it long ago.

PROBLEM WITH DIGITAL EDITIONS

Hi,
I've always encountered this problem with digital editions: Adobe Digital Editions 2.0 has encountered a problem and needs to close. We are sorry for the inconvenience.
I'm using Windows XP pro 2002, service pack2 on an old computer AMD Duron 901 Mhz , 384 mb RAM.
is there a solution ?
Thanks

Hi
I had the same problem, ADE 2 won't work with older AMD computers. See http://forums.adobe.com/thread/1081859
Older version that does work at: http://kb2.adobe.com/cps/403/kb403051/attachments/setup.exe
good luck

Encore CS4 (version 4.0.0.258) will not finish burning to blu-ray disc when using a menu template. DVD burning works fine. Anyone know the problem with blu-ray? HELP!

Encore CS4 (version 4.0.0.258) will not finish burning to blu-ray disc when using a menu template. DVD burning works fine with menu template. Anyone know the problem with blu-ray? HELP!

For CS4 you must update the Roxio component, especially with Win8
http://forums.adobe.com/thread/1309029 http://docs.roxio.com/patches/pxengine4_18_16a.zip
http://corel.force.com/roxio/articles/en_US/Master_Article/000012592-PX-Engine-Description -and-Download

Problem with 'Word edit cell.vi' , Inputs transduced with the value of every row repeated

Hello,
Im using LV2013 with office 2013 report tool kit. I am trying to use Word edit cell to input values in table previously created in template .doc.
Indeed, i trying the example Generate report from template and didnt works well. I search for solution and I see it was a problem with previous version but it seems not solve totally in this version for word office 2010.
http://digital.ni.com/public.nsf/allkb/4041ECB5D02BA57D862579A00002FE8D
I checked this thread but i didnt get it to works. http://forums.ni.com/t5/LabVIEW/Problem-with-append-table-and-Word-2010/m-p/2190960#M702610
Any way to solve it?.
Thanks for help.
Fred
Attachments:
error.png ‏32 KB
Untitled 1.vi ‏19 KB
exampleTemplate.doc ‏37 KB

Hello, I solve it adding this to Word_insert_Table.
http://forums.ni.com/t5/LabVIEW/Report-Generation-MS-Word-Table-Bug/td-p/1605170
Thanks.
Open [LabVIEW installation folder]\vi.lib\addons\_office\_wordsub.llb\Word_Insert_Table.vi
There is a nested for loop that interprets the provided string array data and reformats it into a long ASCII string for the copy buffer. It should look like this:
Change the nested loop to look like this:
The changes I've made are twofold:
1. Within the inner loop, replace the "\n" char with a Tab character
2. Just after the inner loop, add a new "concatenate strings" function that adds "\n".

Problem with single edition App v32

I'm trying to create a single edition App using v32, but when I download the ".ipa" and transfer to my iPad the app opens in blank.
It seams that there is no folio inside it, but I have already tried with different folios and zips, and the same problems occurred.
Can anyone help me?
I already have an App and I'm editing the App with the new folio to update it.
I'm testing in an iPad air with iOS8.
I don't know what can I do to fix it.

hi Bob,
Thanks for response. It is so frustrating.
This is the rejection message i got. I am only trying to update an existing iPad only app.
Have latest version of everything. And i did a complete rebuild but have re-linked them all and then done the build (viewer version 32).
Get no errors when i build and the development and distribution app are put onto my mac.
when i look in my adobe viewer on iPad it is fine. but when i try and look at the loaded .ipa ..i get splash screen then blank screen...

Problem with Digital Editions page view

I used Digital Editions on two books just recently and was able to fit each page of the ebook to it's full height from top to bottom.
I just downloaded my third book to DE, and I can't seem to find the button to fit each page to their full heights (top/bottom). Instead, it's stuck on dual-page view. The single-page view button option isn't even there on the third book, but IS there on the first two books. I downloaded a fourth book and it's experiencing the same problem; stuck in dual-page view with no single-page option.
If I try to re-size the DE window to force it into a single page view, the page numbers are all messed up appearing at random spots of each page rather than at the top right where they are suppose to be.
I re-installed DE but the problem still persists. Is this a problem with the books in specific? Or something else?
Thanks

http://visguy.com/vgforum/index.php?topic=5849.15
Paul Herber, Sandrila Ltd. Engineering and software shapes for Visio
Sandrila Ltd

Problems with guided edit mode in PSE 13

I'm having problems with some of the guided modes in PSE 13.
The simple method for changing the the depth of field does put a blur on my photos but the add focus area doesn't work- leaving my photos a blurry mess. The custom mode using the quick selection tool works fine.
The zoom burst behaves in a similar fashion - it gives a zoom burst to the whole photo but trying to add focus doesn't work. I've seen a few other people commenting about this in various forums but haven't seen anyone post a solution.

murieston a écrit:
I'm having problems with some of the guided modes in PSE 13.
The simple method for changing the the depth of field does put a blur on my photos but the add focus area doesn't work- leaving my photos a blurry mess. The custom mode using the quick selection tool works fine.
The zoom burst behaves in a similar fashion - it gives a zoom burst to the whole photo but trying to add focus doesn't work. I've seen a few other people commenting about this in various forums but haven't seen anyone post a solution.
Both effects are based on the same principle: you have a blurred layer copy over the original. The step you are missing is how to use the gradient tool to show or mask the blurred layer. To better understand, switch to 'expert' view and look at your layers panel and especially at the mask in the blurred layer. You'll see that it's much easier and more flexible to do the steps in expert mode.
- 1 - duplicate the layer
- 2 - apply the effect (blur or zoom burst)
- 3 - add a mask to the blurred layer
- 4 - select the mask (Alt click in the mask icon, this makes the blank mask visible in the display area)
- 5 - use the gradient tool (or any other painting tool) to show/reveal what should be blurred or not.
Your problem may be due to the use of the gradient tool. Be sure the default background/colors are set to default (Click D for white on black)

Problems with Boot Camp - PLEASE HELP!

I'm having problems with Boot Camp. Here's what's happening. I ran Boot Camp Assistant, partitioning a 32GB BOOTCAMP drive. I insert my copy of XP and start the installation. My MBP restarts and boots into the Windows Setup. I let it run through the initial actions. I press ENTER to proceed, F8 to accept the license agreement, then when I get to the part where I should be able to select the Partition 3 BOOTCAMP drive (as it says in the Apple Boot Camp Manual) there is only a Partition 1 Unknown drive. It is the only drive to choose from and its a C: drive. I can't figure out why after I run boot camp the partitioned drive doesn't appear as an option in the windows installation. Please help!!!
Message was edited by: CarlConti08

Boot into Leo, start Disk Utility and you should see two partitions, your Leo partition and a Fat32 partition of 32GB at the end of the drive.
If not, boot camp didn't create it for some reason. If it is there then check it with DU and make sure its OK.
While your in there give it a name so you can easily identify it in your windows installer.
If there is no partition, create one using Disk Utility at the END if the drive. make sure you create it as a msdos (Fat32) partition and give it a name. The name cannot be more than 11 characters must be comprised of numbers and/or letters (no special characters).
Verify it before exiting DU.
Put in windows install disk, reboot - hold option key after the chime until you see the boot screen - select windows CD to begin install.
Don't forget to install Leo windows drivers after installing windows.
Kj

Multiple Problems with N93! Please Help!

I've had the N93 for about 2 weeks and have come across many problems. Any help will be greatly appreciated!
1. Cannot remove themes - I used to own a 7610 and to delete themes from that phone you just went into themes/options and deleted it. The N93 does not have that option in Themes - it only has Preview, Apply, Edit, Help & Exit. I tried deleting/removing themes from Application Manager but it does not list all my themes - at the moment I have 17 themes but only 10 of them are showing up in App. Manager. I have tried removing some of the ones that are there to see if the others will show up but they don't. I have searched the entire phone for the theme files and cannot find them anywhere, so I have no way of removing them.
2. I cannot install any games or applications with .sis extension (I can however install .jar games and themes). I get the following error: "Installation of file.sis not supported". I have tried via cable/pc suite and have also tried copy/pasting the installer to the phone and installing from there and it doesn’t work - I have also tried installing these games/apps on a 7610 and they work fine. My apps. manager settings on N93 are to set to install all and check online cert. is off.
3. Sometimes when installing new themes my previous themes completely disappear. Shortly after the first time I noticed this happen I tried to reinstall the previous themes, it would accept the files, ask where to save, installation progress would go all the way to the end then an error msg came up saying Unable to Install (or something like that). I tried installing on both memory and phone and also tried copy/pasting the file to phone and installing from there but nothing worked. I then formatted the memory card but still could not install anything. And so I ended up formatting the phone using *#7370# (as found on the discussion boards) and then I could install themes again. BUT I still cannot remove themes from themes/options.. and as before not all themes appear in apps. manager so I cannot remove them from there either, and I still cannot install any games or apps with .sis extension.
Are these general problem/glitches with the N93 or is mine just a faulty one? Also does anyone know if the option of delete is indeed supposed to be in Themes/Options/Delete? Anyone with an Nseries phone please check and see if yours does or if you’re supposed to delete from apps. Manager? And if so do all your themes appear in apps. Manager? And also I’m sure the N93 is supposed to be able to install .sis games and apps right??
Please please please any and all help appreciated!!

Thanks for reply rufao,
No the themes I'm trying to remove are the ones I installed. Once in themes I scroll to the one I want to remove but when i press options Delete is not there, for any of the themes. I don't mind the themes that come with the phone and have no intention of uninstalling them, but I want to be able to uninstall the ones I've downloaded and installed myself. But I'm sure the delete option is supposed to be there, unless you are supposed to uninstall all themes from apps. manager but then there is still a problem/glitch as it does not list them all.
The themes that disappear are random (some are for N93, some for N92), when it first happened i formatted phone and memory card then installed themes again, this time different ones disappeared that didn't before.
As far as the sis files perhaps not all but at least some of the games/apps I have tried to install were for latest version of s60. I can't remember which right now as I tried so many (to be sure there was a problem).
Does anyone know of any .sis apps for N93 (latest s60 version) that definitely do work? So I can try them and see whether or not there is a problem?Message Edited by mjm2685 on 24-Aug-2006
04:06 PM

Serious problems with El7/8: please help!

Hello all,
I really hope someone can help me-I've had no luck whatsoever with the customer support team.
I have been using El 3 very successfully for a couple of years. I recently upgraded to El 7 in order to be able to edit HD video and SD video together. The software works fine, however if I come to move multiple clips at once along the timeline, I get the black circle with a line through, and a small white box. This means I cannot move multiple clips. For me, this makes the product unusable.
I downloaded the trial for El8 and was please that this bug was not present. I have since ordered El 8 and installed it (a fresh install ith El 7 gone), however I have discovered that with this I cannot play any video in the monitor window! Again, this renderes the produce useless. I now have two pieces of software that are unusable, and I am receiving no help whatsoever from technical support. Please, can anyone assist?
James

James
First thing to try...with Premiere Elements 8, Edit Menu/Preferences/General and uncheck "Enable GPU Playback". If that does not help, then check out the AdobeTech Note:
http://kb2.adobe.com/cps/515/cpsid_51526.html
Now, in the case of Premiere Elements 7, could you please go into detail about how you are "moving multiple clips along the Timeline"? Are you working on one track or mutiple tracks? How are you grouping these clips prior to the move? Where are you moving them to and from? Etc.
ATR
Hi there,
Thanks for your help. The GPU settings was the first thing I tried-to no avail. Alas, no such luck either with theTechNote.
RE: el 7, I have been filming several scenes for a short film with the drama group I work with. Due to outside circumstances I have been editing back to front (so the last scene is currently at the beginning of the timeline etc.) What I am trying to do is select the clips and shift them to the correct sequential order on the timeline. I have tried highlighting all of them and clicking group, and simply tried dragging them as one big highlighted block. The clips are on seperate tracks, but I have never had any such problems with El 3 which I have used extensively in the past.
What is of particular interest, is that if I select sauy 6 tracks there's not a problem, it's when i select ALOT of tracks I run into difficulty.
I have also tried updating the graphics drivers recently for my GTX 285, which seemed to solve the problem on EL 8, only for it to then go back to what it was doing?!?
Any help would be appreciated

I have major problem with my SL. HELP!

Hello I'm newbie here. I need HELP! When SL first time restart and when it start up... I notice that my clock on top right corner the ":" didn't flash. It shows like 12 34 56 not 12:34:56.
So I look up the system preferences and the checkmark is still there beside "flash between the time separators. I tried to uncheckmark it then checkmark, nothing success.
Also I notice that the network / internet disconnected often not like the Leopard. I had to turn the AirPort off and then turn it back on. I check on Network Diagnostics and the Internet / Server failed sometime. I have no problem with that when I was on Leopard in the same spot (wireless shows full bar) before I upgraded to Snow Leopard.
Sorry for my horrible english grammar. I'm deaf that's why.
Any help? I would be great appreciate your help. thanks!
Message was edited by: TexDeafy

When I upgrade, it remaining in English nothing changed. But the network connection still have issue and the suggestion in other thread still don't work. The flash of ":" won't flashing. It still off even the checkmark is still there. UGH I need HELP since no body respond to my help!

I'm having multiple problems with my MacBook Pro, HELP!

I'm having quite a few problems with my macbook, such as:
-when I click on something from the dock it opens up the applications folder
-my keyboard is acting strange, when on safari the buttons act like shortcuts eg while typing it highlight file or edit print options come up or bookmarks
-when I click on a link on safari it opens up in a new tab
Please help, much appreciated
Charles

. Try to put the iPod into Disk Mode if it fails to appear on the desktop
http://docs.info.apple.com/article.html?artnum=93651
Then restore your iPod to factory settings.
http://docs.info.apple.com/article.html?artnum=60983

I have a problem with my microphone, please help if you can

Hello everyone.
I have a problem with my microphone. After i bougth Creative's sound card "Sound blaster X-Fi Xtreme Audio" and installed it, everything was allright and my microphone was working great, but this was when I used Windows XP, when i started to use Windows 7, it suddenly was very weak and i almost didn't heard it.
Currently, I have bouth Windows XP and Windows 7 installed, so I know the microphone is working when I am switching up between the OS, because it still works good on Windows XP.
If you can help please tell me.
I am using Windows 7 64 bit, I made sure the flexijack settings in the Audio controll panel are set to microphone and not line in, in the Windows 7 audio controll I have set the microphone volum to maximum and made sure it is configured properly.
Thank you for helping.

Originally Posted by tav2000
Hello everyone.
I have a problem with my microphone. After i bougth Creative's sound card "Sound blaster X-Fi Xtreme Audio" and installed it, everything was allright and my microphone was working great, but this was when I used Windows XP, when i started to use Windows 7, it suddenly was very weak and i almost didn't heard it.
Currently, I have bouth Windows XP and Windows 7 installed, so I know the microphone is working when I am switching up between the OS, because it still works good on Windows XP.
If you can help please tell me.
I am using Windows 7 64 bit, I made sure the flexijack settings in the Audio controll panel are set to microphone and not line in, in the Windows 7 audio controll I have set the microphone volum to maximum and made sure it is configured properly.
Thank you for helping.
Hi tav,
While waiting for other forum members to post..
Perhaps you havent installed the latest drivers yet? (link HERE)
Cheers!

Problem with editing Editable Region - HELP!

Similar Messages

Maybe you are looking for