Problem with Epson WF600 and Mavericks printing

My Epson WF600 no longer is recognized wirelessly, by my Macbook Pro, when I go to Add Printers in my System Preferences. I installed the new Drivers for Epson (I think), but unless I connect the printer with a USB cable, my laptop wont print wirelessly from the Epson. Please help.

Try resetting the router (power off 15 secs, then back on), then reset the printer same way.
Also reset Printing System:
OS X Mavericks: Reset the printing system
How did you install new drivers?
The new driver paradigm for OS X is: manufacturers give Apple the current drivers to keep on their servers. It gets installed automatically when we add the printer in Print & Scan prefs. You can force OS X to re-find both installed and available drivers by resetting the printing system.
Find current version of drivers from this:
OS X: Printer and scanner software available for download

Similar Messages

Major printing problem with Epson R1800 and 1.5

I have an Epson R1800 and Aperture 1.5
Any page that I try to print borderless has a quarter inch border around 2 edges. I've tried to calibrate but the two borders are way outside what the calibrate option can deal with.
This happens on all paper sizes. There is no option that I can find anywhere to fix this.
Every other app prints just fine, including iPhoto. It seems limited to Aperture.
Thanks, Bill

Behold the power of asking a question.
It fixed itself.
I have no idea how or why. But after 3 hours of working, it fixed itself in less than 5 minutes.
Thanks, Bill

Who is having problems with old printers and Mavericks?

I am so frustrated!!! I cannot print in COLOR with my upgraded system (Mavericks). I have an older HP Printer and it is no longer supported.
I do not want to buy a new printer when it is just fine.
R. Johnson

I am so frustrated!!! I cannot print in COLOR with my upgraded system (Mavericks). I have an older HP Printer and it is no longer supported.
I do not want to buy a new printer when it is just fine.
R. Johnson

Time Capsule Connectivity Problem with Airport Utility and Mavericks

I have a Time Capsule from 2011 which worked perfectly with my IMac and Airport Utility 5.6.1 but since the upgrade to Mavericks, I cannot get it to work with Airport Utility. Any help much appreciated. Thanks.

When you say.....
I cannot get it to work with AirPort Utility....
What does not work? Can you open up AirPort Utility and take us through the steps? What happens after each step?

Print size problems with Epson R3000 and Mountain Lion

I am using Mountain Lion on a 2008 MBP and an Epson R3000 printer. I can not get prints to size to my paper. In aperture I am choosing custom since there is no option for 11.7X16.5. I have set the print size to the same and still it does not work. I tried both landscape and portrait but that did not work.

This forum is for troubleshooting Apple Software Update for Windows, a software package for Windows designed to update Apple products that run on Windows, and not related to Microsoft Office in any way. I suggest you post Office related questions on Microsoft's own forums for their Mac products.
http://www.officeformac.com/productforums

Problems with Epson R300 and my IMac

I have an iMac 24 Intel Duo Core running OS 10. 4.11
I've had my R300 since I bought the computer and it has been working beautifully until the last 4 months or so. When trying to print a dialog box popped up saying that the computer couldn't communicate with the printer.The printer works with my laptop running OS 10.4.11 as well as using CF card directly in printer. I checked the USB cable with another device in the same USB port on my iMac and it works fine too. I tried resetting the PRAM,repairing the disc permissions,restarting numerous times and eventually resetting the printer and reloading the Epson Software. Before reloading the Epson software I went to the library>printers and removed the old Epson software. I also went to Receipts in the Library and removed the Epson receipts as suggested else where on this forum. The new Epson software reload HANGS at "6 more items to load" . If I connect the printer to my IMac I can see it in the Systems profiler box as well as the print dialog box. I'd really like to use my printer. Please help!

Hi again!
At this point I think you should get Applejack...
http://www.versiontracker.com/dyn/moreinfo/macosx/19596
After installing, reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
applejack AUTO
Then let it do all 5 of it's things.
At least it'll eliminate some questions if it doesn't fix it.
The 5 things it does are...
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start.
First reboot will be slower, sometimes 2 or 3 restarts will be required for full benefit... my guess is files relying upon other files relying upon other files!
Disconnect the USB cable from any UPS so the system doesn't shut down in the middle of the process.
Alternate method...
"Try Disk Utility
1. Insert the Mac OS X Tiger Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
The usual reason why updates fail or mess things up, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions.
Some people get away without Repairing Permissions for years, some for only days.
Message was edited by: BDAqua

Problems with new iMac and Maverick: ITunes and Time Machine

Just upgraded from an old to new iMac, migrated my data from my old machine and installed Maverick. Couple of major problems.
1. My iTunes library won't open. I've been into the library folders but can't work out how to get the old library to load. Decided to try a sync back from my iPhone but while the phone tells me that it has synced with my Mac, the music hasn't moved across.
2. Time Machine doesn't work. On my old machine I was using an external Omega hard drive but when I plug it into the new Mac it isn't even showing up on the desktop. Clearly there's a connection of some sort as the disc is powering from the Mac. Prior to upgrade, I was getting messages that Time Machine couldn't be updated but I put that down to my failing elderly Mac, which kept crashing, freezing and needed replacing. Perhaps the external drive was dying too.
Any suggestions welcome.
Thanks,
Mike

I dragged the installer from the install disk to my desktop and was more successful in installing problem CS2 apps. Make sure to update everything as well. Some times it takes a restart to get the finickiness out of PS.

Find filter problem with Adobe CS6 and Mavericks

Hi to all!
I've 2 new MacPro with OSX 10.9 (is no possible to downgrade) with Adobe Illustrator CS6 and all software are full updated at the last version.
Firs of all I've found a problem after a last firmware update of my 2 MacPro, in samba connection, solved by AFP implement; in detail:
I've a Qnap storage with samba and afp shares, so when I connect the samba share the search function in finder not find any, but if I connect the same share via AFP protocol, all works good.
Ok, it's a problem but no so bad for me because I've the possibility to use AFP ;-)
Ok, now the big problem:
when I use the CS5 Illustrator and I execute the "insert" command, the search window show blank screen in the search area if I select a qnap sared folder (AFP or SAMBA shared get the same result, 0 element found)
After many and many tests I've solved with a workaround: I've forced the Finder to index the shared folder (from the command line in the console) and in this case I've no more problem...
The problem affect only the afp and samba share, with the local folder (volumes) I don't have any problem.
So, I can't downgrade Maveriks, and I'm sure the problem is not of CS6... then my only solution is to wait a future update of Mavericks?! or anyone can suggest me a solution?
Thank you for any reply.
Paolo

Go here to check out compatibility:
http://roaringapps.com/apps?index=a
As for Photoshop CS6 itself, I have no issues running
it on Mavericks on my 2011 Mini Server.
Also, before upgrading, make sure any drivers for third
party hardware are up to date and compatible with Mavericks.

Problem with Time Capsule and Wireless Printing (Mac+PC Mixed)

I have a time capsule that is the wireless router for the house and my iMac and laptops use the wireless network beautifully. I installed a Dell 1320C color laser printer by connecting it to the usb port on the time capsule. The airport express utility did NOT recognize any USB printer connected to the time capsule. I was however able to wireless print from my iMac by asking the printer utility to find all available printers which it did and then installing the printer drivers (thanks google). So, while i cannot find my printer as being connected to the time capsule through the airport utility, i can find it through the print utility as a connection through bonjour and i can print just fine to it.
Now i installed bonjour on my laptops and found and selected the 1320c just fine. When i try to print through the laptops (pc), nothing happens and the file stays in the print queue.
I am willing to live with the first quirk as I can print wirelessly from the iMac. I however need help to print from the laptops.
Any suggestions?
thank you so much in advance
Mukund

Mukund SRINIVASAN wrote:
Once I connect the printer via ethernet to the time capsule, how do I
1) see the printer on my iMAC - what utility do I run etc?
It is connected to your network. Check your printer setup manual on how to set it up. Or go the the Dell website for printer support if you can't find your manual.
2) can i then run bonjour from my windows laptops and see the printer through the network?
Via ethernet, it shouldn't need Bonjour to set up.

Problems with iphoto '08 and maverick

After upgrading on Mavericks I tried to create a fotobook with my old iphoto 08 (7.1.5), but iphoto doesn't find any theme and so it doesn't work.
What can I do?
Is is necessary to buy a new version of iphoto or can I update something for free?
Thanks for your help.

if I try to get the new version of iphoto he tells me that I have a version of iphoto but that I have to buy the new one. Is this correct?

Printing Problem with EPSON LX 300+

Dear all,
I have met a problem with Epson LX 300+. After I set up printing on PLD, the result printing is bad. Font and setting are not the same as preview in SBO. How to solve this matter..? I used SBO 2005A PL 43.
Thanks for your help....
Regards,
agung
Edited by: Agung Adrianto on Aug 28, 2008 8:17 AM

Hi Agung,
Here is a way out for the issue you have submitted. I can't guarantee that this wayout work perfectly:
Question:
As we know that the dos matrix printer supports dos prompt and thus printing speed and
life of the printing head is comparatively more than what we print the same in graphical format.
So when I tried to print from SAP Bone in dot matrix printer, the printing speed is very slow and quality of printout is not good enough.
Any clarifications on this regard would prove very helpful to me.
Regards,
xxxxx
Consultant Business solutions.
Solution:
Do you use one of this printer types:
Dot Matrix, Printer, Needle Printer, Citizen ProDot 300 , Oki Microline, Epson FX880, Epson FX890 ?
Here the stepwise I have tried :
In order to print using Dot Matrix printers, follow the below
instructions:
1. Run SAP Business One.
2. Click the upper menu 'File' and select 'Page Setup'.
3. The Print Setup window opens. Under 'Paper', in the field 'Size', select 'Letter' from the drop down menu.
4. Click OK to confirm your selection.
5. On your desktop, click Start => Settings => Printers.
6. Right click on the required Dot Matrix printer and select 'Printing Preferences...'.
7. Click the 'Paper/Quality' tab page and click the 'Advanced' pushbutton.
8. Under'Paper/Output'=> 'Paper Size', click on the underlined paper size(e.g. A4) and select 'Letter' from the drop down menu.
Note that if you leave the value 'A4', each page will be spreaded over 2 pages when printing using Dot Matrix printers.
9. Under 'Graphic'=> 'Print Quality', click on the underlined value (e.g. 230X250 dots per inch) and select '120X144 dots per inch' from thedrop down menu.
Note that in case the value '120X144' is not available you should select a similar value from the list.
I did not test it yet and I am not so sure about the result but you could test it.
Rgds,

I have a problem with indesign cs6 and my epson 3880 on mac

I have a problem with indesign cs6 and my epson 3880 on mac. I need an older version of indesign but do not have a serial number....any suggestions?

I see then I believe Kglad's advice is on track with starting with updating your printer drivers. I have also moved this discussion over to the InDesign forum as the Users in this forum likely have additional suggestions.
Also if you can please turn off your e-mail signature if you want to respond via e-mail. Your responses are going to a public forum where the information is accessible by anyone. I have edited your previous response to remove the signature.

Elements 9 printing problems with epson 3880

HI All:
Elements was working fine with epson 3880.
Problems developed:
1. Would print color pics in black and white only while in Editor; color pics printed ok in Organizer
2. Now Print Preview does not work in either Editor or Organizer
3. Now cannot print in either Editor or Organizer
I purchased Elements online. I do not have a CD for reinstall.
Any help would be appreciated.

I am having a similar problem that seems the reverse of yours in a way, though it may be related. Mine occurred only with the disk-installed version, not the downloaded trial version, and it was present from the start on my iMac. Everything worked fine with the 3880 and 2400 printing from the trial version of PSE9 (downloaded), just as it had with PSE8. CS5 and Apple Aperture are also installed and had been working normally. Then I received the install disk for PSE9 and installed it. After that, Preview did not produce a preview, PDF did not produce a PDF, and Print did not produce a print. CS5 also would not preview or print after that. Aperture, however, was unaffected. Some experimentation revealed that the problem occurred only with "Photoshop Elements Manages Color" selected and printer color management turned off. With "Printer Manages Color" selected, it printed.
I uninstalled both CS5 and PSE9 and reinstalled 8, which once again worked properly. Hoping there had been an install error as the cause of the problem with the original installation of 9, I then uninstalled 8 and reinstalled 9, and the problem recurred. So it's back to PSE8, and try to figure out how to call the problem to Adobe's attention without paying for a tech support session. Interesting that a glitch that causes a problem with PSE's printing can also affect PS's printing.
I suspect your problem is related to mine. Do you use a Mac? I think the reason the problem didn't occur at first with my system is that the trial installation is not the same as the paid one, if only because the trial version doesn't have the user sign up with Photoshop.com or whatever it is, which I had never done until I installed 9 from the disk. So it seems that something in the full, purchased version is causing the glitch. I have no idea why your version should have worked at first, then crumped.
Two more things I'm going to do now: reinstall CS5 on the iMac (should be OK, as it was before I got 9), and install 9 on my laptop to see what happens.
My advice for now is to download the trial version of 9, uninstall the current installation of 9, install the downloaded trial version, and (without entering the serial # from your downloaded version) see if it works properly. Then contact tech support. Especially if you have a Mac, tell them you have heard from others who have related the same problem to you.
—howard

Trouble printing with Epson 2880 and SL

Installed SL on my MBP but not my iMac yet as it is my main computer for printing with Aperture. I have been very happy with the 2880 and how well the prints match what I see on the screen (calibrated with i1d2). Well with SL I downloaded rosetta and the new 2880 drivers (as instructed by Epson), but whenever I choose a paper profile e.g., Premium Photo Glossy, the picture in Aperture Print Pane turns a purple hue. I, of course, have color management turned off in the Print Settings dialog. Anyone have any idea what is going on? As far as I can tell I'm not doing anything differently. More importantly, has anyone been able to get good photo printing with SL, Aperture and the new Epson drivers for the 2880 or similar Epson printer?
Thanks, Jim

That KB article just saved me from going back to 10.5. I was having the same purple problem with all Ilford and Hahnemuhle profiles.
That problem is now gone (by just disabling Black Point Compensation) but: when trying to print from Aperture (2.1.4) with my R2880, any paper I choose is apparently stuck at +roll paper+, giving a +wrong source+ error when it reaches the printer. I now have to hit preview, select the correct page setup and profile and print from there. So far this seems to work. But it's a pain and not what I want to be stuck doing for very long.
I had this problem before but only when printing to Manual-Roll. Now even Sheet Feeder options don't work. This would all be fixed if we only had a proper Page Setup option in Aperture as in every other OS X application...
At least that convoluted method gives me the right colors - which I was definitely not getting by going the system managed route.
Growing pains anyone?

I can't print using airprint from my iPhone 4. Everything with the phone and the printer and router are up to date. I can print from my iPad 2 with no problems. What's wrong with the iPhone 4?

I can't print using airprint from my iPhone 4. Everything with the phone and the printer and router are up to date. I can print from my iPad 2 with no problems. What's wrong with the iPhone 4?

I just wanted to leave a note that it's working now. I'm not sure if it was the latest iTunes update that got it working or that i decided to start a new library instead of using the one i had backed up on Windows 8 (it didn't occur to me to check using the old library when i re-installed iTunes). But if anyone is having this problem, it might be worth trying again with a new installation of iTunes to see if the latest update works for you, and if not, try using a fresh library instead of a backup (by fresh library i mean discard your old library completely and start a new library, not just restore as new iPhone, a whole new library).

Problem with Epson WF600 and Mavericks printing

Similar Messages

Maybe you are looking for