Time Capsule Connectivity Problem with Airport Utility and Mavericks

I have a Time Capsule from 2011 which worked perfectly with my IMac and Airport Utility 5.6.1 but since the upgrade to Mavericks, I cannot get it to work with Airport Utility. Any help much appreciated. Thanks.

When you say.....
I cannot get it to work with AirPort Utility....
What does not work? Can you open up AirPort Utility and take us through the steps? What happens after each step?

Similar Messages

Printer problem with Airport Utility and Epson CX5500

Hi,
I recently bought an iMac '24 2.66 Computer and was able to set up my internet through an airport. When it came to hooking up a wireless Epson CX5500 printer, the airport recognized it, but when it came to print in the printing queue it simply wont print. I was able to find a very helpful post that would possibly be my next step in fixing it (probably just a program error or hook up)
Here is that post:
ideapod
*Posts: 5*
*Registered: Jul 16, 2007*
*Re: Problem connecting a Epson USB Printer*
*Posted: Sep 29, 2008 5:42 AM in response to: tonys28661 *
+Hi there,+
+I had the same problem, but with an Epson CX5500.+
+Firstly, BTW - I found out there IS a list of supported printers: http://support.apple.com/kb/HT1370?viewlocale=en_US. Before you scream - "that's leopard you idiot"; in the table, if the printer is listed with a MODERN driver, then it will work with Airport Base Station - eg TimeCapsule.+
+Next. My problem was solved by deleting the spaces put into the printer name by timecapsule. When the printer is recognised it was called "Epson CX 5500". My Macbook printer service then set up a Queue which was mdns://...Epson%20CX%205500... Note - substitution of %20 for space in the name. I removed the spaces from the name via airport utility, manual set up, printers. Now the macbook could print to it.+
Cheers,
Mark
The problem that i have is the step by step process of altering this or finding it. As i made the name of the shared printer EPSONStylusCX5500 but could not acess the printer name one to change it. The url link still shows the 20%. If someone could please take the time to explain on how to do it, then maybe just maybe, i would be able to print wirelessly. Any other ideas or even cheap printers that would work without a problem as i would simply go out and buy one instead. Thanks.

When you say.....
I cannot get it to work with AirPort Utility....
What does not work? Can you open up AirPort Utility and take us through the steps? What happens after each step?

Can i set up my Time Capsule 1st generation with airport 5.5.3?

can i set up my Time Capsule 1st generation with airport 5.5.3?

Yes, if you are asking about AirPort Utility 5.5.3 for Windows.....and you are running XP SP3 on your PC.
AirPort Utility 5.5.3 for Windows
If you are running XP SP2 on the PC, then you will need to use AirPort Utility 5.4.2 for Windows
AirPort Utility 5.4.2 for Windows

Is there a fix for the connectivity problems with iPhone 5S and ISO 7.0.2?

Is there a fix for the bluetooth connectivity problems with iPhone 5S and ISO 7.0.4?
I am having problems connecting the BT Audio and the handsfree phone connectyion is unreliable in 2012 Mitsubishi Lancer XL.
All worked OK with ISO 6.

Hello CraigNicholson
You would need to sync with iTunes to get that process to work for you. Check out the article below for more information on how to resolve that issue to get the proper token to use Push Notifications again.
iPad and iPod touch: Unable to use YouTube or Push notifications
http://support.apple.com/kb/ts3305
Regards,
-Norm G.

Timecapsule and iMac Early 2008 - Problems with Airport Utility

I have bought a new iMac and a TimeCapsule. With *Leopard 10.5.5* i have some problems to change the configuration. The Assistant will not work. The changed settings will not send to theTime Capsule (Ethernet or and Wireless). The airport signal is _very low_ under OSX (-60 — -64 dB). When I use airport with Windows XP on Bootcamp partition it will work fine. No problems with changing settings and the signal is -1 db.
Who has the same problems or can help me!

Do the black bars drop also at these times?
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712

Time Capsule not responding in Airport Utility on setup after hard reset.

I have been trying to set up my Time Capsule after a hard reset.
I am seeing the Time Capsule in Airport utility with default settings, however when I choose continue to setup or manual setup it tells me I need to switch networks to continue and then gives me the following message.
BASE STATION ERROR: AirPort Utility was unable to find your Apple wireless device.
The Time Capsule continues to work as a hub for devices connected to it but I am unable to see the hard disk or use the wireless functions. Any ideas?

Thank you. The computer is connected directly to the time capsule through ethernet and giving me those messages. I have tried resetting a couple of times to no avail. I guess I am starting to wonder if I have a problem with the Time Capsule which is only a year and a half old. As I mentioned I have number of devices connected through the LAN ports and they are all working fine. It is only the functionality of wirless and the hard disk that appears to be compromised.
Message was edited by: newkindofsoup
Message was edited by: newkindofsoup

Help! Time Capsule set up help: Airport Utility not cooperating

Hi Everyone,
I'm desperate for help with this issue. I have a Time Capsule, Base Station and Airport Express (all previous generation)at different points throughout the house. At first the issue was with the base station that refused to find my network so I called the helpdesk and got it fixed and all was well until the next day when the Time Capsule and Airport Express began to malfunction.
While everything connected to the network fine, our iphones couldn't find the network while downstairs. I tried to fix the issue but then I realized that while the base station wireless mode said 'extend network' the time capsule and airport express wireless mode said 'join network.'
I believed I overdid it on hitting the time capsule's reset button for a soft reset one too many times and now the slow flicker amber light will not steady itself or move to green and the computer is unable to successfully attach itself to our network. I've tried to restore the factory default settings but this only results in an error message 'there was an error trying to detect apple wireless devices, make sure network connection is valid and try again.'
All computers and phones have been updated with current firmwares etc. At this point, I'm stressed because I rely heavily on the internet for school and research and I don't know what else to do. Should I do a hard reset or just contact apple support?
Thanks,
Michelle

Trinifoto wrote:
I have a Time Capsule, Base Station and Airport Express
Welcome to Apple's discussion groups.
Please identify the "Base Station". Do you mean an AirPort Extreme Base Station? Are all those 802.11n-capable devices?
the base station wireless mode said 'extend network' the time capsule and airport express wireless mode said 'join network.'
That suggests to me that none of those devices is your "primary" router. If that's the case, what is the brand and model of the device that's connected to your Internet feed or Internet modem?
I believed I overdid it on hitting the time capsule's reset button for a soft reset one too many times and now the slow flicker amber light will not steady itself or move to green and the computer is unable to successfully attach itself to our network.
What does AirPort Utility say about the status of the Time Capsule? (If you have trouble connecting to the Time Capsule with AirPort Utility, try plugging an Ethernet cable from a LAN port of the Time Capsule to the Ethernet port of your MacBook Pro.)
I've tried to restore the factory default settings but this only results in an error message 'there was an error trying to detect apple wireless devices, make sure network connection is valid and try again.'
Did you do that reset by holding in the reset button until the status light flashed rapidly several times? Normally after a reset, you have to select the network for that device (usually named in the form "Apple Network xxxxxx") for AirPort Utility to "see" it. That's why an Ethernet cable can be useful.

How do i set up time capsule to work with airport extreme base to extend wireless network?

i have a airport extreme base, how do i set up a time machine to extend the wireless network i have with airport extreme? i have also 3 airport express's connected to the same network to extend my wifi all over my house. thanks in advance.

Much better graphics, thanks.
You can leave the Time Capsule connected by Ethernet from the Linksys and configure for a "roaming" network as mentioned previously.
To do this, open AirPort Utility - Manual Setup
Click the Wireless tab below the icons
Wireless Mode = Create a wireless network
Wireless Network Name = Same name as the AirPort Extreme
No check mark needed next to Allow this network to be extended
Radio Mode = Same setting as the AirPort Extreme
Channel = Automatic
Wireless Security = Same setting as the AirPort Extreme
Wireless Password = Same password as the AirPort Extreme
Confirm Password
Click the Internet icon, then the Internet Connection tab
Connect Using = Ethernet
Connection Sharing = Off (Bridge Mode)
Update to save settings and allow the Time Capsue to restart
Then power down the entire network
Wait a minute or two
Start the modem first and let it run a full minute
Start the AirPort Extreme the same way
Power up the switch
Power up the Time Capsule for a minute
Keep starting devices one at a time about a minute apart
Now, your computer will automatically pick up a wireless signal from either the AirPort Extreme or Time Capsule, whichever device is closer and providing the stronger signal.

Time Capsule not Showing in Airport Utility

I decided to re-set my Time Capsule this afternoon. The green light is on but it is not showing in the Airport Utility and Time Machine says there is no back up disc available.
What can I do?

Temporarily, connect a spare Ethernet cable from your Mac to one of the LAN <-> ports on the Time Capsule.
Restart both your Mac and the Time Capsule and then open AirPort Utility to see if your Time Capsule has been found.
If the Time Capsule is still lost, disconnect the Ethernet cable and perform a Factory Default Reset on the Time Capsule as follows:
Pulll the power cord from the back of the Time Capsule
Wait a few minutes
Hold in the reset button and keep holding it in while you plug the power cord back in to the Time Capsule
Keep holding the reset button an additional 8-10 seconds and then release the button
Allow 30-40 seconds for the Time Capsule to restart to a slow, blinking amber light
Connect the spare Ethernet cable from your computer to one of the LAN <-> ports and open AirPort Utility to reconfigure the device

Time capsule not recognized by airport utility?

I just connected my new TC to try to backup my macbook for the first time. Installed the airport utility and conected the TC, but the amber light won't stop flashing even though I connected it directly to the macbook or to de the modem.
How can I fix this?
WMF

I did nothing seems to work.
I installed AU and when I try to update and it tells me that I alredy have the latest version. I also have 10.5.8 OS.
Then I plug in the Ethernet cable to port (marked with the circle on top of ii) on the TC. Then to my MacBook's ethernet port then I turn-on the AU and then my TC. However, the TC never stops blinking amber.
What else should I do?
Thanks

Setup problems with airport extreme and cable.

I am trying to install a new airportextreme 802.11n with cable (comcast) using a Motorola SURFboard eXtreme. The airport extreme keeps blinking amber. Any suggestions?

Should I connect the modem to the AEBS before I power it up?
Yes, all devices that normally are interconnected by Ethernet, should be connected during the power recycle.
If it continues to flash amber, should I still go through the set up with Airport Utility? If so, manual or let it guide me?
Yes. The following Apple Support article describes the flashing amber status light in more detail.
By default, your AEBS will broadcast an unsecured wireless network with a network name of something like: Apple Network NNNNNN. You would then use the AirPort Utility to make any required configuration changes. The Utility has two basic modes: 1) Assist-me (aka Automatic) and 2) Manual Setup. The latter is used to fine-tune any settings. The assisted mode, should take you through the steps to get the AEBS up and running properly for most common configurations.
Please feel free to post back if you have any questions on setting your AEBS up.

Why did I see many airport and time capsule devices in iPhones AirPort Utility?

I had this problem with my Airport utility that I saw three devices(an AirPort Express and Time Capsule and my own AiPort Express) in my airport utility for iPhone. Were they connected to my wifi network which was created by my own AirPort Express? There were two devices that I think shouldn't have been there. I changed my AirPort Express from bridge mode to DHCP and NAT. Those two other devices disappeared. Could other people somehow have used my wifi network and extended it? It was password protected.

I had this problem with my Airport utility that I saw three devices(an AirPort Express and Time Capsule and my own AiPort Express) in my airport utility for iPhone. Were they connected to my wifi network which was created by my own AirPort Express? There were two devices that I think shouldn't have been there. I changed my AirPort Express from bridge mode to DHCP and NAT. Those two other devices disappeared. Could other people somehow have used my wifi network and extended it? It was password protected.

Since latest update to airport extreme im getting 10 unknown base station and time capsule items showing in airport utility as a network. when able to "forget" them they initially drop off but soon return. how do i get them deleted and stay that way

since latest update to airport extreme im getting 10 unknown base stations and time caps showing up as though they are a part of my network. sometimes i can "forget" them and they will disappear initially but soon return. i need and want only my connection inside my home . any ideas. i have done a factory reset and set up a new network but they continue to show up.

I'm not convinced that the problem lies in Airport Utility. This same thing was happening to me, nearly exactly as you describe it. The thing is that with me, the problems clearly started when I updated the firmware in my Airport Express (n). That's when all the wacky stuff started happening. Sometimes it would show up in AU, sometimes it didn't and even if it didn't, I could still access the internet through it.
But as you said, the problems got really bad when another Express (b/g) was put on the network with it. Even when it did work, the (b/g) would make it impossibly slow.
You know more about this than me, and clearly have more patience if you've restarted the network fifty times. I gave up at about ten.
In any case, your solution is more of a work around and if you're still having that slow connection problem, I'm not sure you've got it. But thanks for your reporting of this. At least I know I'm not crazy.

Airport Time Capsule 2TB - Problem with Backups

Hello everybody,
I´m from Germany but I hope you understand my english. I have got a problem with my new Airport Time Capsule 2TB. I want to use it as a data storage, where all my pictures and videos are accessible via WIFI.
Copying the datas was no problem but now I want to make a backup of all the datas. For this purpose i created a RAID 0 out of two 1TB external hard drives. I connected the bay with these two hard drives in it with the Time Capsules USB interface. The problem is that no drives were displayed in the airport-programm ... Also non of my other USB hard drives were found. Only the Time Capsule´s partition "data" got found...
In the time machine program I can´t see the Time Capsule, so I can´t do a backup on the normal way... Even the "hard drive - program" from OS X didn´t show the Time Capsule.
It looks like they don´t want to know anything about each other ...
So, how can I realize to do a backup of the datas saved on my Time Capsule?
Thank you for your answers and sorry if my english is bad in some cases.

Ok.. can understand..
You have two problems.. maybe 3.
1. Time Machine (TM) does not work on network drives which includes Time Capsule.. so you simply cannot backup your pictures from a TC to a backup location using TM. It only works on locally connected drives.. you can use an alternative software like Carbon Copy Cloner .. I did check superduper but in the past it was not able to backup network source drives. You will need to check if the situation has improved.
2. The Time Capsule will not accept raid array disks.. it must be a standard hard disk on a USB drive that it has drivers for.. and that is far from every model out there. So not all plain single USB disk works.. almost no array disks work.
3. Your iphoto library if that is what you mean by pictures should not be on a network drive.. apple says it is going to be corrupted.
YMMV.. it is dangerous and only a matter of time.. if the pictures and videos are raw from camera that is fine.. it is only the iphoto (or aperture) library that is at risk.

Time capsule not showing in airport utility? recently moved house and new internet set up!

Hi
I had a time capsule set up and working perfectly then we moved house, changed ISP and now time capsule light is flashing amber. When I open the Airport Utility only the internet (i.e. a globe) shows, no time capsule. My Macbook Pro has no ethernet port or I would have tried hardwiring! I can enter the time machine but back up history is red.
I read that latest OS may require a rename of the capsule if the original name was long (29 characters including spaces at present) but to change it the support says to access it via the airport utiltiy which I can't do!
Help anyone?!
Sam

Simply factory reset the TC and start over.
Any time you move the network configuration the TC will require a new configuration.
The Factory Reset universal
Unplug your TC/AE. Hold in reset. and power the TC/AE back on.. all without releasing reset and keep holding in for about 10sec. The time is not important.. it is the front LED rapid flashing that indicates you are in factory mode.
Release reset.
If it doesn’t flash rapidly you have released reset at some point and try again.
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.

Time Capsule Connectivity Problem with Airport Utility and Mavericks

Similar Messages

Maybe you are looking for