Problem With External Mic
Hi,
Im useing Hp Pavilion Dv9000 , recentlly i bought Philips PC Headset SHM1900 for using skype ...when i pluged both the mic and speaker pins in the slot,i can hear music and others but mic not working...i tried all the options in control pannel for sound....should i install any drivers to make the mic work??? please let me know
Thanks...
This question was solved.
View Solution.
hi ,
you won't be able to hear your MIC untill you check in this
but if you mean by not working that it's not working on skype
so i will ask you please to check your setting in Skype
then try to make the new MIC as default
then try using Windows Recorder
if windows recorder can detect sound so there is no reason for fear
but if the problem remained i will ask you to try another MIC
** Don't forget to check your Sound Drivers
>>>>
Did this reply resolve your post or question?
If yes, then share the good news! Let others know this reply was helpful by accepting this solution.
You can also show your appreciation by giving kudos
Mark Th. Antonio
Faculty Of Engineering Alexandria University
Similar Messages
-
Problems with external context mapping
Hi ,
I am having the following problems with external context mapping from one WD component to another.
Problem description:
In the <i>Component Interfaces</i> I have defined a WD interface "InfA".
In the <i>interface controller</i> of this compoenent,I have ContextA and attributeA(cardinality 1..1).The contextA is marked as an "Input Element".
Now my webdynpro componentB adds InfA as used component.In componentB I decalre a contextB with attributeB and map it to contextA to set up the external context mapping.
Now I expect that if any webdynpro component implements this WD interface InfA ,he has access to contextA with the data getting filled from contextB.
After i have created the component for the used component I try to fill values in the source node contextB thru this code:
wdContext.currentContextB.setB(value);
But in the runtime I keep getting error nullPointerException for nodeContextB,suggesting that the mapping has not been completed.
Can anyone suggest due to what the error can come ,and, if its a webdynpro bug ,is there a workaround??
Thanks in advance for your help.
Best regards
SouravHI,
Valery : I personally checked by doing the example, if the names of value attribute are different in the child's interface and parents component controller then it throws the exception.
Sourav: NullPointer Exception is thrown when something is not properly initialised, if in the main component the cardinality of mapped origin is 1.1 then you need to access it element directly like:
wdContext.currentParentNodeElement().setFname("Abhijeet");
wdContext.currentParentNodeElement().setLname("M");
i will suggest just check out if you are declaring some element of value node and without initialising taking its use or what?
if this doesnt solve your problem, please post the expanded exception.
hope it helps
let me know if you face nay problem
regards -
Problem with external punchout in SRM Server 713
Hello,
We upgrade from SRM_SERVER 701 SP 04 to SRM_SERVER 713 SP 02, now we have a problem with external catalog, we did not change anything in standard call structure, however now when the user access to external catalog, select a product and "checkout", SRM returns to shopping cart screen without products and no message are register in log in transaction code SLG1.
Our parameters in structure are:
10 https://xxxxxxxxx URL
20 VIEW_ID NAME Fixed value
30 VIEW_PASSWD XXXXXX Fixed value
40 USER_ID SY-UNAME SAP field
50 BRANDING search5 Fixed value
60 LANGUAGE ES Fixed value
70 COUNTRY MX Fixed value
75 EASYORDER 1 Fixed value
80 target _top Fixed value
85 ~caller CTLG Fixed value
90 OCI_VERSION 4.0 Fixed value
91 FILTER Fixed value
92 OPI_VERSION 1.0 Fixed value
100 HOOK_URL return URL
110 returntarget _top Fixed value
we made some test with parameter BYPASS_INB_HANDLER, set as 'X' but this not solve our issue.
We have an implementation in badi BBP_CATALOG_TRANSFER to map product category, even if I set an external breakpoint in this implementation, system does not pass through it, also we test with this implementation inactive and behavior is the same, nothing transfer to shopping cart
Does anyone know what's missing?
Thanks in advance.
Best regards,
José Luis D.Hello Jason,
Thank you for your answer, but as I told, If I set an external breakpoint it does not stop for debugging, so I can't see table as you recomended. This process (debugging) is familiar to me, in last version I can do it.
Any suggestion?
Thanks in advance, best regards
José Luis D -
Hi. I have a problem with external editing preferences. If I add Photoshop as an external editor, it won't launch when selected, if I add it as an additional external editor it will. Why? How can I fix this as I need to use Photoshop and another program as the additional external editor.
I use a Mac running OS X (10.8.5) and PS CS4 and LR 5.7. Any ideas on a fix? Thanks in advance.I don't know why Photoshop won't start. However, it's possible to create external editor presets using the additional external editor tools. There are instructions on how to do this in the Lightroom help. You could assign Photoshop and create one preset, and then assign another program and create another preset.
I don't know if deleting your preferences would fix the problem or not. It can sometimes fix other problems.
Preference and other file locations in Lightroom 5 -
I have problem with my mic when i make call the others cannot hear me but the mic is ok
i have problem with my mic when i make call the others cannot hear me but the mic is ok i checked it out and it works dont know what to do help me !!
Hello Sabbir Khan,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Can't hear through the receiver or through speaker, and can't be heard
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
Best of luck,
Mario -
i have problem with the mic....sometimes others can hear me and other times not at all
can anybody provide me with the solution
-
im having a problem with my mic on my ipod 5th gen it works but it douse not pick up any sound unless I talk right next to the mic but it sounds low . how can i fix this
- Make sure the mic hole is clear and unobstructed. It is the little hole on the back by the camera lens(if has back camera). For the 16 GB one without the back camera the mic hole is on the top edge near the center.
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
Problem with External 2.1 digital speakers
Anybody have any problems with external digital speakers connected to the SPDIF connection? I have a 1215-600XT, and I tried connecting my old DELL Boston Acoustic 2.1 speakers. They worked, but any time a "sound" played, a loud pop would follow the end of the sound track. If its multiuple sounds (i.e. an application that is making numerous alert sounds) I get multiple pops. It even happens at the endf of music tracks. It was so annoying, I stopped using the speakers. before I invest in another set of speakers, want to know I am not wasting my time.
Also, anyway of getting the soundcard to support digital 2.1 or other sound? The set-up screen only shows stereo for external speakers and no way of adding more.
Sincerely
Scottpmoney,
If you need a RMA, you will need to contact Customer Support either via email or phone. Also, it may be a fault with the sub and not just the cable alone, anyway contact Customer Support and they will be able to assist further.
Jason -
Problem with audio/mic combo jack on MS GS70 Stealth Pro
Hello, i have a problem with the mic/audio plug, when i plug my mic/headphones (Razer Electra / iPhone headset / HTC Headset) in to the plug, i get sound from the headphones, but the mic isn't recognized, i've tried uninstalling the drivers and installing them again, nothing works. Please, help me
Quote from: Mirri;113498
Aaand problem still exists. It just turns out that my laptop mic has taken over from the mic port for some reason. Not sure why it won't recognize that anything is plugged in in the mixer despite stating in the little task bar window that an audio device was plugged in whenever I do it.
Try to use the 4 pin to 3 pin headphone adapter and see if the problem still remains.
Quote
Try to use the 4 pin to 3 pin headphone adapter.
http://www.msi.com/faq/nb-1094.html -
Problem using external mic with imovie
My internal mic does not work; Ihave bought a logitech external mic that shows up as working but imovie does not record my voice.
Save the files that you want on the external hard drive to a data DVD or CD and then reformat.
See http://discussions.apple.com/message.jspa?messageID=11045569#11045569 -
Audio problems using external mic
Hi,
I'm having problems hearing audio that was recorded using an external mic - both wireless and wired handhelds.
I can hear the audio through the camera (Canon GL2 dv)
but not during importing into IMovie HD 5.02.
After import I still can't hear audio. All volumes are up and on and boxes are checked. Is there an audio patch?
Please help!Hi Sue,
No that didn't solve the problem either.
It seems to be a problem with IMovie.
You can hear the audio using Final Cut Pro. -
Audio recording with external mic
Hi,
I have a problem that's become a real issue for me. I record meetings from the end of a conference table and have used a Dell in the past. I have a great little external mic called Sound Grabber. However, when I try to use it on my Mac, the volume quality is not adequate. I feel like the Mac really doesn't recognize the external mic and wants to default to the internal mic all the time, and that doesn't cover a conference room by any means. I've tried other mics and had the same issue, so I'm sure it's not the mic. I've also seen similar complaints from other users, but no one has come up with an explanation or solution.
This function is vital to my job and lack of quality recording forces me back to the Dell every time. Can anyone help me get this figured out so I can stick with the Mac?MBP = MacBookPro
I use a MicFlex (http://www.mac-pro.com/s.nl/it.A/id.1896/.f $39.95) for most personal voice uses on OSX and an mVox MV100 for desktop conference/group calls (http://www.mvox.com/index.asp?PageAction=VIEWPROD&ProdID=2 $9.99) on my PC (used to be Mac compatible but not since 10.3) -
Error code 36 (problems with external hard drive)
I have just upgraded to Yosemite and am now having major problem with my external western digital hard drive. I cannot create new folders and when I hit command N I get error code 36. I also cannot move files from one folder to the next. When I try to move them I get the error message: "The operation cannot be completed because a file of that name already exists" and that simply isn't true. None of the files' names exist in the other folder.
Ok, It appears to be the fault of Western Digital. I ejected the hard drive and then plugged it back in and it said that the drive was broken but I could still read the files and it told me to save the files on another disk and reformat. So it was just a coincidence that I upgraded to Yosemite at the same time that my external hard drive broke.
-
Problems with External Monitor In XP
Ok, I've got a huge problem with XP on Bootcamp.
I've recently got a Samsung TV which I can use as an external monitor. This works absolutely fine when I'm using OSX, recognizes the TV and can use it as a second screen.
When I try to use the same monitor in Windows under Bootcamp, it works as an extension of my desktop, but not able to mirror my desktop. I want to do this so I can play my games on a large screen instead of a small one.
I've trawled the forums on this kind of problem and found a few answers. However, many of them talk about the ATI graphics drivers. I've downloaded the appropriate drivers and the control center from the website, but to no avail.
People have also said about going into display properties: settings: advanced and selecting the ATI tab. I have no ATI tab.
Also with the Catalyst Control Center, when I try to run it, it tells me that I dont have permission to change the settings and to contact my administrator, even though I am the administrator.
Does anyone have any ideas how I can solve this?
By the way. I'm connecting the external monitor via the DVI on my Macbook Pro to the HDMI connection on the TV.
Many thanks
ChrisMy logic tells me, if you are using a new MBP the way it's designed is that even if you are plugged in at times it will go in battery mode for a few minutes in order to prevent battery damage, than it will recharge. This happens in the background without notice. However, within this couple of minutes you might notice your display screen to sleep because it is setup to sleep in 1 minute or less in the preference under battery mode. So within that window you might have your screen go blank since the entire process takes a lot more than a minute. I hope this helps.
-
Inkscape/X11 Problems with external Monitor
Hello,
I´m using Inkscape to create vector art on my MacBook Pro.
Since my update to Mavericks I´m having problems with X11. I have the version 2.7.5 of XQuartz installed currently.
After some troubles, Inkscape opens up just fine.
But I cannot drag Inkscape over to my external monitor, which is based to the right of my notebook.
Inkscape simply disappears.
I´m quite the DAU ;-) with Computers and Software, so it would be nice, if you can help me.
Thanks a lot in advance!
Best,
SonjaHow about trying a native Mac app like iDraw http://www.indeeo.com/idraw/
Maybe you are looking for
-
Is it possible to get JobLog for the series of tasks ???
Hi Experts, I am new to Workflow, can u tell me the following is possible thru Workflow.. My requirement is such.. step 1 : Call a program with varaint in background step 2: Get the status of the job above Step 3 : depending on the Status send mail
-
How to use "Auto increment" in temp table Oracle
Pleas tell me yaar, In MS Sql for Auto increment i am using like this "seqid int identity" for temp table t_seq_tbl table(seqid int identity,EVENT_SEQ_NO varchar(30)) In oracle how to use....
-
___IMPORT WEB SITE IN DREAMWEAVER
Hello I made a web site with FrontPage 8 years ago I would like today import it in dreamweaver to change it How can I do please? thank you for your help Marcu972
-
Does anyone know if the logitech tablet keyboard (standalone) works with the iPad air? Can't find the answer on the logitech website
-
Releasing Objects in Guided Procedures
Hi.. I have my <b>sda</b> file created on one server and if i deploy it on another server, the first time it releases only some of the objects in the folder. I am using automatic release of objects by setting devobj.processing property to false of <b