Problem with forms/app server

Hi,
I have a problem which is as below;
I am opening a forms 10g application by putting my application server ip address in the browser.I can log in and go to the menu ,click and open a form in the application (there is no problem till this point).
I generate a document and the form is saved(it gets saved and there is no problem).
Problem
There is a print generate button after that which is pressed (Its for printing).
Its supposed to send the report (in MS word format) to the printer.When that button is pressed,the application gets hang.Its not responding at all.
Its a packaged application and i dont have the source.
Could it be an application server issue or a forms issue??.
Because these forms were in 9i before and recompiled to 10g recently.
Could any one suggest me which could be the problem area?
Thanks and regards
Ajith

Dear Ajith,
if u r using Forms 10g then and not using webutil functionality and trying to do something on client side (eg. printing) then forms 10g tries to do it on application server and not on client. That's why your application is getting hanged up.
Regards,
Manish
India

Similar Messages

Problem with sun app server startup

hi,
i am getting problem with sun app server default start.the error is::
[#|2006-03-01T13:54:35.121+0530|WARNING|sun-appserver-pe8.2|javax.enterprise.tools.launcher|_ThreadID=10;|LAUNCHER005:Spaces in your PATH have been detected. The PATH must be consistently formated (e.g. C:\Program Files\Java\jdk1.5.0\bin; ) or the Appserver may not be able to start and/or stop. Mixed quoted spaces in your PATH can cause problems, so the launcher will remove all double quotes before invoking the process. The most reliable solution would be to remove all spaces from your path before starting the Appservers components. |#]
now i am useing Win Xp operating system,
show me a solution.
Regs..
Narasimha

You haven;t specified the exceptions you r getting ........while starting your default server.
if u r getting exception about InetClass then connect your system with LAN/Internet then your problem will be solved becoz i m using same location address as you specified, space doesn't matter at all - i think so, it is running fine........

Problem : App works with Sun App server 8.0 but fails with 8.1

Hi All
     I am experiencing some strange problem with executing my JSF application with Sun App Server.
     I have an EAR deployed on Sun Application Server 8.0 and 8.1.
     Strangely it works quite fine with 8.0 but fails with 8.1.
     In my JSP page ..I have a dummy component whose getter method is used as a "FormLoad" event of the page.
     <h:form id="imageForm" enctype="multipart/form-data">
     <h:messages showDetail="true" />
     <table width="980" border="1" cellpadding="0" cellspacing="0" bordercolor="#A9B8C2">
          <tr>
<td>
               <h:inputHidden value="#{Screen1.initializeService}"/>
          <h:selectOneListbox styleClass="style2" id="cmbMiddleArea" immediate="true" value="#{Screen1.selectedMiddleArea}">
          <f:selectItems value="#{Screen1.middleAreaList}" />
     </h:selectOneListbox>
     In my backing bean i have ..
     public String getInitializeService() {
          ..... Retrieve all the data from DB to initialize all the components on the JSP page
          .......setMiddleAreaList......
          .......setSelectedMiddleArea.....
          ........set the values of the individal component...
     I am retrieving all the data from DB in this getter method and intializing the components on the JSP page.
     I have also checked the code generated for JSP by both the servers.I am posting the code here for reference although
     i did not find any significant difference between the two...
     For Server 8.0
     private boolean jspxmeth_h_inputHidden_0(javax.servlet.jsp.tagext.JspTag jspxth_h_form_0, PageContext jspxpage_context)
     throws Throwable {
     JspWriter out = jspxpage_context.getOut();
     // h:inputHidden
     com.sun.faces.taglib.html_basic.InputHiddenTag jspxth_h_inputHidden_0 = (com.sun.faces.taglib.html_basic.InputHiddenTag) jspxtagPool_h_inputHidden_value.get(com.sun.faces.taglib.html_basic.InputHiddenTag.class);
     jspxth_h_inputHidden_0.setPageContext(_jspx_page_context);
     jspxth_h_inputHidden_0.setParent((javax.servlet.jsp.tagext.Tag) jspxth_h_form_0);
     jspxth_h_inputHidden_0.setValue("#{searchBean.initializeService}");
     int jspxeval_h_inputHidden_0 = jspxth_h_inputHidden_0.doStartTag();
     if (_jspx_th_h_inputHidden_0.doEndTag() == javax.servlet.jsp.tagext.Tag.SKIP_PAGE)
     return true;
     jspxtagPool_h_inputHidden_value.reuse(_jspx_th_h_inputHidden_0);
     return false;
     For Server 8.1
     private boolean jspxmeth_h_inputHidden_0(javax.servlet.jsp.tagext.JspTag jspxth_h_form_0, PageContext jspxpage_context)
     throws Throwable {
     PageContext pageContext = jspxpage_context;
     JspWriter out = jspxpage_context.getOut();
     // h:inputHidden
     com.sun.faces.taglib.html_basic.InputHiddenTag jspxth_h_inputHidden_0 = (com.sun.faces.taglib.html_basic.InputHiddenTag) jspxtagPool_h_inputHidden_value_nobody.get(com.sun.faces.taglib.html_basic.InputHiddenTag.class);
     jspxth_h_inputHidden_0.setPageContext(_jspx_page_context);
     jspxth_h_inputHidden_0.setParent((javax.servlet.jsp.tagext.Tag) jspxth_h_form_0);
     jspxth_h_inputHidden_0.setValue("#{searchBean.initializeService}");
     int jspxeval_h_inputHidden_0 = jspxth_h_inputHidden_0.doStartTag();
     if (_jspx_th_h_inputHidden_0.doEndTag() == javax.servlet.jsp.tagext.Tag.SKIP_PAGE)
     return true;
     jspxtagPool_h_inputHidden_value_nobody.reuse(_jspx_th_h_inputHidden_0);
     return false;
     Now the actual problem is "getInitializeService" method never gets called when i deploy and run the application on Sun App Server8.1
     However with Sun App Server 8.0 it woeks perfectly fine.
     Can anybody help me in resolving these issues ?


Actually generated JSP code can be referred as ...
For Server 8.0
     private boolean jspxmeth_h_inputHidden_0(javax.servlet.jsp.tagext.JspTag jspxth_h_form_0, PageContext jspxpage_context)
     throws Throwable {
     JspWriter out = jspxpage_context.getOut();
     // h:inputHidden
     com.sun.faces.taglib.html_basic.InputHiddenTag jspxth_h_inputHidden_0 = (com.sun.faces.taglib.html_basic.InputHiddenTag) jspxtagPool_h_inputHidden_value.get(com.sun.faces.taglib.html_basic.InputHiddenTag.class);
     jspxth_h_inputHidden_0.setPageContext(_jspx_page_context);
     jspxth_h_inputHidden_0.setParent((javax.servlet.jsp.tagext.Tag) jspxth_h_form_0);
     jspxth_h_inputHidden_0.setValue("#{Screen1.initializeService}");
     int jspxeval_h_inputHidden_0 = jspxth_h_inputHidden_0.doStartTag();
     if (_jspx_th_h_inputHidden_0.doEndTag() == javax.servlet.jsp.tagext.Tag.SKIP_PAGE)
     return true;
     jspxtagPool_h_inputHidden_value.reuse(_jspx_th_h_inputHidden_0);
     return false;
     For Server 8.1
     private boolean jspxmeth_h_inputHidden_0(javax.servlet.jsp.tagext.JspTag jspxth_h_form_0, PageContext jspxpage_context)
     throws Throwable {
     PageContext pageContext = jspxpage_context;
     JspWriter out = jspxpage_context.getOut();
     // h:inputHidden
     com.sun.faces.taglib.html_basic.InputHiddenTag jspxth_h_inputHidden_0 = (com.sun.faces.taglib.html_basic.InputHiddenTag) jspxtagPool_h_inputHidden_value_nobody.get(com.sun.faces.taglib.html_basic.InputHiddenTag.class);
     jspxth_h_inputHidden_0.setPageContext(_jspx_page_context);
     jspxth_h_inputHidden_0.setParent((javax.servlet.jsp.tagext.Tag) jspxth_h_form_0);
     jspxth_h_inputHidden_0.setValue("#{Screen1.initializeService}");
     int jspxeval_h_inputHidden_0 = jspxth_h_inputHidden_0.doStartTag();
     if (_jspx_th_h_inputHidden_0.doEndTag() == javax.servlet.jsp.tagext.Tag.SKIP_PAGE)
     return true;
     jspxtagPool_h_inputHidden_value_nobody.reuse(_jspx_th_h_inputHidden_0);
     return false;
     }

...Not alone with problems on "Mail" app server connection, iMap!!!! I believe Apple is strengthening their server farm. Has been out for over a week; they were wise to have the iCloud also in the cloud.

Not alone with problems on "Mail" app server connection, iMap!!!! I believe Apple is strengthening their server farm. Has been out for over a week; they were wise to have the iCloud also in the cloud. Be patient!

Have you considered the possibility that the third party fan software might itself be implicated in the issue, theosib (or perhaps something else introduced at about that time?).
My inclination in a situation like this would be to back up your drive to an external, wipe the drive, and do a clean installation. At the very least I'd try an archive and install.
Do you have plenty of free space on the drive? Once you get things down below the last 10 to 20% things can get hairy at times, and may not be fixed as a result of simply freeing up some room, as free space fragmentation is likely to have set in.
As far as RAM goes, either "Rember" - http://www.kelleycomputing.net:16080/rember/ or, better still, but less user friendly, "memtest" - http://www.memtestosx.org/ does a much better job of checking your RAM than the AHT. Still takes a while to run for a thorough test, but much quicker than the approach you are planning on using.
You might also want to use "Activity Monitor" to check for any applications with progressive "memory leaks" or that are acting as CPU hogs, given your symptoms
Cheers
Rod

JMS problem with Sun Application Server 8.2

Hi!
I've just started trying JMS and found a problem.
I set a connection factory called "QueueConnectionFactory" in the Sun Application Server Admin Consol.
After this I test this code:
import javax.jms.*;
import javax.naming.*;
public class Sun_JNDI
public static void main(String args[]) throws Exception
Context jndiContext = null;
System.setProperty("java.naming.factory.initial","com.sun.enterprise.naming.SerialInitContextFactory" );
System.setProperty("java.naming.factory.url.pkgs","=com.sun.enterprise.naming");
System.setProperty("java.naming.provider.url","localhost:1024");
jndiContext = new InitialContext();
Object O = jndiContext.lookup("QueueConnectionFactory");
System.out.println(jndiContext);
in result I got this long Exception message:
2006.02.12. 10:52:59 com.sun.corba.ee.spi.logging.LogWrapperBase doLog
INFO: "IOP00710299: (INTERNAL) Successfully created IIOP listener on the specified host/port: all interfaces/1356"
2006.02.12. 10:53:00 com.sun.enterprise.connectors.ActiveRAFactory createActiveResourceAdapter
SEVERE: RAR6001 : Class Not found : com.sun.messaging.jms.ra.ResourceAdapter
2006.02.12. 10:53:00 com.sun.enterprise.connectors.ActiveRAFactory createActiveResourceAdapter
SEVERE:
com.sun.enterprise.connectors.ConnectorRuntimeException: Error in creating active RAR
at com.sun.enterprise.connectors.ActiveRAFactory.createActiveResourceAdapter(ActiveRAFactory.java:76)
at com.sun.enterprise.connectors.ResourceAdapterAdminServiceImpl.createActiveResourceAdapter(ResourceAdapterAdminServiceImpl.java:267)
at com.sun.enterprise.connectors.ConnectorRuntime.createActiveResourceAdapter(ConnectorRuntime.java:189)
at com.sun.enterprise.naming.factory.ConnectorObjectFactory.getObjectInstance(ConnectorObjectFactory.java:71)
at javax.naming.spi.NamingManager.getObjectInstance(NamingManager.java:304)
at com.sun.enterprise.naming.SerialContext.lookup(SerialContext.java:293)
at javax.naming.InitialContext.lookup(InitialContext.java:351)
at Sun_JNDI.main(Sun_JNDI.java:40)
Caused by: java.lang.ClassNotFoundException: com.sun.messaging.jms.ra.ResourceAdapter
at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:268)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:164)
at com.sun.enterprise.connectors.ActiveRAFactory.createActiveResourceAdapter(ActiveRAFactory.java:50)
... 7 more
2006.02.12. 10:53:00 com.sun.enterprise.naming.SerialContext lookup
SEVERE: NAM0004: Exception during name lookup : {0}
com.sun.enterprise.connectors.ConnectorRuntimeException: Error in creating active RAR
at com.sun.enterprise.connectors.ActiveRAFactory.createActiveResourceAdapter(ActiveRAFactory.java:76)
at com.sun.enterprise.connectors.ResourceAdapterAdminServiceImpl.createActiveResourceAdapter(ResourceAdapterAdminServiceImpl.java:267)
at com.sun.enterprise.connectors.ConnectorRuntime.createActiveResourceAdapter(ConnectorRuntime.java:189)
at com.sun.enterprise.naming.factory.ConnectorObjectFactory.getObjectInstance(ConnectorObjectFactory.java:71)
at javax.naming.spi.NamingManager.getObjectInstance(NamingManager.java:304)
at com.sun.enterprise.naming.SerialContext.lookup(SerialContext.java:293)
at javax.naming.InitialContext.lookup(InitialContext.java:351)
at Sun_JNDI.main(Sun_JNDI.java:40)
Caused by: java.lang.ClassNotFoundException: com.sun.messaging.jms.ra.ResourceAdapter
at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:268)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:164)
at com.sun.enterprise.connectors.ActiveRAFactory.createActiveResourceAdapter(ActiveRAFactory.java:50)
... 7 more
Exception in thread "main" javax.naming.CommunicationException: serial context communication ex [Root exception is com.sun.enterprise.connectors.ConnectorRuntimeException: Error in creating active RAR]
at com.sun.enterprise.naming.SerialContext.lookup(SerialContext.java:317)
at javax.naming.InitialContext.lookup(InitialContext.java:351)
at Sun_JNDI.main(Sun_JNDI.java:40)
Caused by: com.sun.enterprise.connectors.ConnectorRuntimeException: Error in creating active RAR
at com.sun.enterprise.connectors.ActiveRAFactory.createActiveResourceAdapter(ActiveRAFactory.java:76)
at com.sun.enterprise.connectors.ResourceAdapterAdminServiceImpl.createActiveResourceAdapter(ResourceAdapterAdminServiceImpl.java:267)
at com.sun.enterprise.connectors.ConnectorRuntime.createActiveResourceAdapter(ConnectorRuntime.java:189)
at com.sun.enterprise.naming.factory.ConnectorObjectFactory.getObjectInstance(ConnectorObjectFactory.java:71)
at javax.naming.spi.NamingManager.getObjectInstance(NamingManager.java:304)
at com.sun.enterprise.naming.SerialContext.lookup(SerialContext.java:293)
... 2 more
Caused by: java.lang.ClassNotFoundException: com.sun.messaging.jms.ra.ResourceAdapter
at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:268)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:164)
at com.sun.enterprise.connectors.ActiveRAFactory.createActiveResourceAdapter(ActiveRAFactory.java:50)
... 7 more
So I tested this code under Netbeans5 and I don't where to find jar file contains the class: com.sun.messaging.jms.ra.ResourceAdapter
Other time I tryied to lookup this URL: "java:comp/env/jms/QueueConnectionFactory"
The result was: javax.naming.NameNotFoundException
I know it is a small code example but if I'm not able to solve this problem I can't go on with JMS.
I would be glad by any help.
Regards:
Sandor

Hello
In my code it looks like that:
1: System.setProperty("com.sun.jndi.ldap.LdapCtxFactory", "iiop://localhost:3700");
2: Context ctx = new InitialContext();
3: TopicConnectionFactory factory = (TopicConnectionFactory)ctx.lookup("jms/DailyDestinationFactory");
4: TopicConnection connection = factory.createTopicConnection();
5: TopicSession session = connection.createTopicSession(false, Session.AUTO_ACKNOWLEDGE);
6: Topic topic = (Topic)ctx.lookup("jms/DailyBean");
7: TopicPublisher pub = session.createPublisher(topic);
8: TextMessage msg = session.createTextMessage();
9: msg.setText("NewMessage");
10: pub.send(msg);
and it work with Sun App Server 8.2.

Problems in Sunjava App Server

hi frnds,
Whenever i start the deploy tool that is there in Sun Java App Server i get an error message stating that the main class file is not found. How do i rectify this problem. I have the latest App server which i downloaded from the sun site. I hvent installed J2ee seperately as such. I remember to c tht it comes bundled with the app server.Is there any problem in tht. Please do reply to my mail
With Regards
Ajay

There is no special PATH/CLASSPATH setting required to start the deploytool. One possible reason for your problem could be that the environment was not defined properly in <install_dir>/config/asenv.conf during install time (possibly due to some error during install time). This can lead to the deploytool not being able to find the main class. Was there any error during installation of the app server ? You might want to check the asenv.conf file to see if it has been set properly. If not, you might have to uninstall and do a fresh installation of the app server again.

Integrating iPlanet Web Server 6.0 with SunOne App Server 7.0

I am experiencing problems integrating iPlanet Web Server 6.0 with SunOne App Server 7.0
My magnus.conf is
#ServerRoot /usr/iplanet/servers/https-test
ServerID https-test
ServerName sulev016.eur.gep.ge.com
ErrorLog /usr/iplanet/servers/https-test/logs/errors
PidLog /usr/iplanet/servers/https-test/logs/pid
User root
MtaHost localhost
DNS off
Security off
ClientLanguage en
AdminLanguage en
DefaultLanguage en
RqThrottle 128
StackSize 131072
CGIWaitPid on
TempDir /tmp/https-test-ab0d7966
Init fn=flex-init access="$accesslog" format.access="%Ses->client.ip% - %Req->vars.auth-user% [%SYSDATE%] \"%Req->reqpb.clf-request%\" %Req->srvhdrs.clf-status% %Req->srvhdrs.content-length%"
Init fn=load-types mime-types=mime.types
Init fn="load-modules" shlib="/usr/iplanet/servers/bin/https/lib/libNSServletPlugin.so" funcs="NSServletEarlyInit,NSServletLateInit,NSServletNameTrans,NSServletService" shlib_flags="(global|now)"
Init fn="NSServletEarlyInit" EarlyInit=yes
Init fn="NSServletLateInit" LateInit=yes
Init fn="load-modules" shlib="/usr/iplanet/servers/plugins/passthrough/bin/libpassthrough.so" funcs="init-passthrough,auth-passthrough,check-passthrough,service-passthrough" NativeThread="no"
Init fn="init-passthrough"
==========================================
my obj.conf is
<Object name=default>
NameTrans fn="assign-name" from="(/OMS|/OMS/*)" name="passthrough"
NameTrans fn="NSServletNameTrans" name="servlet"
NameTrans fn="pfx2dir" from="/servlet" dir="/usr/iplanet/servers/docs/servlet" name="ServletByExt"
NameTrans fn=pfx2dir from=/mc-icons dir="/usr/iplanet/servers/ns-icons" name="es-internal"
NameTrans fn="pfx2dir" from="/manual" dir="/usr/iplanet/servers/manual/https" name="es-internal"
NameTrans fn=document-root root="$docroot"
PathCheck fn=unix-uri-clean
PathCheck fn="check-acl" acl="default"
PathCheck fn=find-pathinfo
PathCheck fn=find-index index-names="index.html,home.html"
ObjectType fn=type-by-extension
ObjectType fn=force-type type=text/plain
Service type="magnus-internal/jsp" fn="NSServletService"
Service method=(GET|HEAD) type=magnus-internal/imagemap fn=imagemap
Service method=(GET|HEAD) type=magnus-internal/directory fn=index-common
Service method=(GET|HEAD) type=*~magnus-internal/* fn=send-file
AddLog fn=flex-log name="access"
</Object>
<Object name=cgi>
ObjectType fn=force-type type=magnus-internal/cgi
Service fn=send-cgi user="$user" group="$group" chroot="$chroot" dir="$dir" nice="$nice"
</Object>
<Object name="servlet">
ObjectType fn=force-type type=text/html
Service fn="NSServletService"
</Object>
<Object name="jsp092">
ObjectType fn="type-by-extension"
ObjectType fn="change-type" type="magnus-internal/jsp092" if-type="magnus-internal/jsp"
Service fn="NSServletService" type="magnus-internal/jsp092"
</Object>
<Object name="ServletByExt">
ObjectType fn=force-type type=magnus-internal/servlet
Service type="magnus-internal/servlet" fn="NSServletService"
</Object>
<Object name="es-internal">
PathCheck fn="check-acl" acl="es-internal"
</Object>
<Object name="passthrough">
ObjectType fn="force-type" type="magnus-internal/passthrough" Service type="magnus-internal/passthrough" fn="service-passthrough" servers="http://3.224.68.131:81"
Error reason="Bad Gateway" fn="send-error" uri="$docroot/badgateway.html"
</Object>
The requests are not passing through to the app server when i try to access it through port 80.
Presently I am testing my appln over port 81 on the app server.
Thanks and Regards
Vineet Guliani

Each ObjectType and Service directive should begin on a new line. You appear to have placed two directives on a single line.

Need help, oracle xml db jar conflicts with sup app server v9

I am trying to create a web service on sun app v9 that will work with calls to oracle xml db on oracle 10gr2. I have successfully created a web service on other application servers (weblogic and websphere) but sun was the app server of choice. The oracle jar xmlparserv2.jar is causing problems with the sun server as it seems to have bundled some java classes from the javax.xml.parsers, javax\xml\transform (and even from dom, sax and streams sub folders) packages.
If I put the oracle jar in my war the error I get in the log file when accessing my webservice tester is:
[#|2007-08-13T08:37:48.691-0400|INFO|sun-appserver-pe9.0|javax.enterprise.system.stream.out|_ThreadID=15;_ThreadName=httpWorkerThread-8080-0;|error: http://www.w3.org/TR/html4/loose.dtd<Line 31, Column 3>: XML-20100: (Fatal Error) Expected '>'.
line 31 of http://www.w3.org/TR/html4/loose.dtd|#]
[#|2007-08-13T08:37:48.738-0400|INFO|sun-appserver-pe9.0|javax.enterprise.system.stream.out|_ThreadID=15;_ThreadName=httpWorkerThread-8080-0;|
error: Expected '>'.
line ? of http://ann-griffithlap.jsc-eses.com:8080/TestWS/TestWSService?WSDL#types?schema1|#]
And the UI error from the tester call is:
javax.servlet.ServletException: java.lang.RuntimeException: Service Class not generated as expected at com.sun.enterprise.webservice.monitoring.WebServiceTesterServlet.initializePort(WebServiceTesterServlet.java:546) at com.sun.enterprise.webservice.monitoring.WebServiceTesterServlet.doGet(WebServiceTesterServlet.java:158) at com.sun.enterprise.webservice.monitoring.WebServiceTesterServlet.invoke(WebServiceTesterServlet.java:104) at
I had attempted to move the xmlparserv2.jar elsewhere in the classpath for classloading and one error I got while trying different spots was:
[#|2007-07-16T14:16:57.982-0400|SEVERE|sun-appserver-pe9.0|javax.enterprise.system.tools.deployment|_ThreadID=10;_ThreadName=main;_RequestID=c9ffb261-2b6d-4dd2-bd8f-362e6b2af1a0;|INFO: JAXP SAXParser property not recognized: http://java.sun.com/xml/jaxp/properties/schemaLanguage|#]
[#|2007-07-16T14:16:57.982-0400|SEVERE|sun-appserver-pe9.0|javax.enterprise.system.tools.deployment|_ThreadID=10;_ThreadName=main;_RequestID=c9ffb261-2b6d-4dd2-bd8f-362e6b2af1a0;|Check to see if parser conforms to JAXP 1.2 spec.|#]
which gets repeated for each deployment and then the server would not start up.
Is there any suggestions of where I can put the oracle jar to get sun to still start up as well as the jar to be available for use by the classes in my war that also contains the webservice that will call my underlying class? I have not found a way to eliminate the oracle jar if I want to do an xquery against oracle xml db.
Thanks,
D.Griffith

Here's more information on the machines.
Machine where the Oracle Database 11g Express Edition: IP Address is 10.162.128.67
Machine where the SQL Server database: IP Address is 142.120.51.30.
I've modified the tnsnames.ora to the following:
XE =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 10.162.128.67)(PORT = 1521))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = XE)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
    (CONNECT_DATA =
      (SID = PLSExtProc)
      (PRESENTATION = RO)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
    (CONNECT_DATA =
      (SID = CLRExtProc)
      (PRESENTATION = RO)
SQLSERVER =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = TCP)(HOST = 142.120.51.30)(PORT=1433))
    (CONNECT_DATA =
      (SID = SQLSERVER)
(HS = OK)
)But now I'm getting the following error:
C:\>tnsping sqlserver
TNS Ping Utility for 32-bit Windows: Version 11.2.0.2.0 - Production on 18-SEP-2
012 14:52:59
Copyright (c) 1997, 2010, Oracle. All rights reserved.
Used parameter files:
C:\oraclexe\app\oracle\product\11.2.0\server\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)
(HOST = 142.120.51.30)(PORT=1434))) (CONNECT_DATA = (SID = SQLSERVER)) (HS = OK)
TNS-12541: TNS:no listener
C:\>Regards,
Allen

SP2013: Scaling search with multiple app server

Hi Team,
I am scaling a new SP environment with multiple App Server.
I have used AutoSPINstaller to install SP2013 and Search. My search components are spread across all servers. All Search components on all servers and I have a blank publishing site as part of my content source.
My issue is when i start full/Incremental crawl. It keeps on crawling for the whole day and do not produce any crawl error neither it stops. We waited for even 2 das but the crawl kept on going on.
Any help will be really appreciated.
Thanks Ba$va

Hi Basva ,
Follow these steps (one at the time) to reset the Content Source crawl:
Start -> Run -> Services.msc -> Restart the “SharePoint Server Search 15”.
Make sure the Application Server Administration Service Timer Job working .
Navigate to Central Administration-> Manage service application->
Search Service Application,
Reset Index and see if that fixes the problems.
Go into the Services.msc on each server and change the "RECOVERY" method of the “SharePoint Server Search 15” from "FIRST FAILURE" to "TAKE NO ACTION" so that the service did not restart before
all the servers had their "SharePoint Server Search 14" stopped.
Best Regards,
Eric
Eric Tao
TechNet Community Support

..i reported a problem with a App but nothing happend! What i must do now to get my money back?

Dear Community!
I have a problem with a App i purchased. These App was to buggy and crashes to often!
Yep, u know. I reported this problem to itunes-Store-Support over "Purchase History" and "Report Problem" for weeks.
And now? I cant report this problem again! What is with my money?
greetz
Stephan form Germany

You'll want to contact iTunes through http://expresslane.apple.com. When there just choose the right categories and send off an email. There you can make a request for a refund. Best of luck!!!

Problems with n97 apps connecting to network (Voda...

Problems with n97 apps connecting to network (Vodafone UK – 3G)
Recently a number of my apps which used to connect automatically to the internet (which ever was available – known wi-fi or 3g) have stopped doing this. They now only connect to one known wi-fi.
I’ve tried uninstalling and reinstalling each app, but this hasn’t solved the problem. I’ve checked for software updates and do not believe any have been applied or are available. All apps have been downloaded via Ovi on the phone. I still am able to access the internet by the web browser which was installed on the phone and via google maps (which also still manages GPS position, search, etc).
The apps which I notice causing a problem are:
Sainsbury’s/nectar
Tesco
Map my tracks
Snaptu
Opera Mini
Any one got any ideas???

I have the same problem since i updated my mac to 10.5.6.
Each time I have to do a diagnostic and retype the WEP password to have the internet connection.

Problems with AOL IMAP server connection on my BlackBerry Z10 STL100-3, and BB PlayBook 64GB WiFi

Problems with AOL IMAP server connection on my BlackBerry Z10 STL100-3, and BB PlayBook 64GB WiFi
Thursday 4:20am EST, 02-19-2015
Hi, My connection to the AOL IMAP server has suddenly failed - Says "Not Connected" on Accounts page
I haven't changed anything and this just started failing this morning.
I've saw same issue on my Blackberry PlayBook 64GB.
Is anyone else recently experiencing AOL IMAP Errors?
Solved!
Go to Solution.

Yes! Same thing happened suddenly to my Z10 this morning. No AOL.

HT4864 I am getting a triangle with an exclamation point next to my inbox...it says: There may be a problem with the mail server or network. Verify the settings for account "MobileMe" or try again. The server returned the error: Mail was unable to log in

I can send but cannot recieve email
This is the messege I am gewtting:
There may be a problem with the mail server or network. Verify the settings for account “MobileMe” or try again.
The server returned the error: Mail was unable to log in to the IMAP server “p02-imap.mail.me.com” using “Password” authentication. Verify that your account settings are correct.
The server returned the error: Service temporarily unavailable

Also if I go to system preferences accounts and re-enter the password it fixes the glitch sometimes.

Problems with Remote App on iOS 4?

I have a new iPhone 4 and tried to use the Remote App in Connection with Apple TV. While I'am able to pair the remote app with Apple TV, I cannot use it properly. It works for a while, then it get's disconnected with a message that maybe a Firewall might be activated in the Router.
I have no problems with Remote App connected to my iTunes Library. I also tried it with a iPod Touch which is still on iOS 3.1.3, no problems to connect to the Apple TV from there as well.
Are there any known problems with iOS 4 and Apple TV?

Chenks wrote:
maybe for you, but isn't for me.
i have the remote app on my iphone4 and it's connected to 2 appletv's.
i don't experience any dropping of connection etc.
May I ask what wifi hardware you use? It might be an wifi issue, but one which is only related with the "Bonjour" protocol which seems to be used for the Remote App. I found this thread which is older (iOS 3) but describing exactly the same problems:
http://discussions.apple.com/thread.jspa?threadID=2048555&start=0&tstart=0
bear in mind that the iphone4 is now "n" wifi compatible (2.4Ghz), so could it be that the "n" part of your network is poor and thus why you only see the problem on the iphone4 ?
At least it is not poor when using it from other devices or moving a lot of data in other Apps. It is all Apple Hardware (nothing older than 2 years), and maybe that's the problem. I never had network hardware which made so much trouble, as Apples Airport series. I wouldn't wonder if it is an incompatibility between a new wifi chip in the iPhone 4 and a older Revision of an Airport device. But I don't know how to check - is there a system.log on the iPhone which I can access somehow?

Problem with the new server UCS C220 for set IP to CIMC

Hi
We’ve a problem with the new server UCS C220.
We bought two servers UCS C220 M3 for CallManager 8.6 with High Availability.
When we turn on the server during the boot and when it tells us, oppress F8 to enter at the CIMC and set the IP. But it never enters at the CIMC.
Then, we configure our DHCP server and our switch, we connect the three gigabyte ports to our switch to give him an IP to the CIMC, so and then can enter via browser, but neither works.
Note. The dedicated management NIC does not link, the other two ports do make link.
What do you suggest to put an IP to CIMC and start installing our applications?
regards

You may have noticed that there is no DVD rom on the c220. What you need to do is:
Login into the CIMC from your browser
Luanch the KVM
Insert the VMware DVD in your machines drive
On the KVM pop up there should be a tab to mount the drive, after mounting it click on Macros and choose ctrl_alt+delete to restart.
After the VMware OS installs press F2 to enter IP.
Browse to the VMware ip to download the Vsphere client
Open the Vsphere client, enter the ip of the vmware and the username will be root and no password if you did not set one.
You can now upload OVA templates or manually create virtua machine from this enviroment.
Hope this help

Problem with forms/app server

Similar Messages

Maybe you are looking for