Problem with Generate a certificate and Key

I have a Cisco S370 and generated a certificate Key to block HTTPS pages.
I require a CA signs the certificate generated by the Cisco S370, but the CA returns me an error and asks the key is changed to 2048, but I have no option to do this in the GUI, look in the CLI but can not find any option to change the HTTPS certificate key 2048
You can change the certificate that was generated by the WSA S370 to 2048

In addtition to Kush's response, we had a similar thread in the past. Please refer to:
https://supportforums.cisco.com/message/3900340?referring_site=bss&channel=bdp#3900340
Also, please note it would be advisable to refer to this Feature Request using Cisco Bug ID CSCzv70884 instead of
86121.
You can search for Bug IDs using Cisco Bug Search Tool :
https://tools.cisco.com/bugsearch/
From this tool, you can not only obtain info about the bug but also open TAC cases and Save the bug so you can get updates.
Regards,
-Valter

Similar Messages

Problem with generating xml and nested cursor (ora-600)

I have a problem with generating xml (with dbms_xmlquery or xmlgen) and nested cursors.
When I execute the following command, I get a ORA-600 error:
select dbms_xmlquery.getxml('select mst_id
, mst_source
, cursor(select per.*
, cursor(select ftm_fdf_number
, ftm_value
from t_feature_master
where ftm_mstr_id = pers_master_id ) as features
from t_person per
where pers_master_id = mst_id ) as persons
from f_master
where mst_id = 3059435')
from dual;
<?xml version = '1.0'?>
<ERROR>oracle.xml.sql.OracleXMLSQLException: ORA-00600: internal error code, arguments: [kokbnp2], [1731], [], [], [], [], [], []
</ERROR>
The problem is the second cursor (t_feature_master).
I want to generate this:
<master>
<..>
<persons>
<..>
<features>
<..>
</features>
</persons>
<persons>
<..>
<features>
<..>
</features>
</persons>
</master>
If i execute the select-statement in sql-plus, then I get the next result.
MST_ID MST_SOURCE PERSONS
3059435 GG CURSOR STATEMENT : 3
CURSOR STATEMENT : 3
PERS_MASTER_ID PERS_TITLE PERS_INITI PERS_FIRSTNAME PERS_MIDDL PERS_LASTNAME
3059435 W. Name
CURSOR STATEMENT : 15
FTM_FDF_NUMBER FTM_VALUE
1 [email protected]
10 ....
I use Oracle 8.1.7.4 with Oracle XDK v9.2.0.5.0.
Is this a bug and do somebody know a workaround?

Very simple...Drop all type objects and nested tables and create them again. You will get no error. I'll explain the reason later.

There is a problem with the security certificate of the proxy server. Error code 18 and 38.

Hi All,
After several hours and a short night of sleep I'm out of ideas and hopefully someone here can help me trying to solve this one. First of all the situation:
Exchange 2013 on a remote location with a CA-certificate.
Outlook 2010 and 2013 on different locations, locally installed and on RDS.
When I open Outlook on my laptop all is fine, no errors, good sync, no problem. But when I open Outlook on our Remote Desktop Servers with Outlook 2013 I'm getting errors like "There is a problem with the security certificate of the proxy server. The
name on the security certificate is invalid or does not match the name of the site. Outlook is unable to connect to this server. (Error code 18)". Opening Outlook 2010 the message is the same, but the error code now is 38.
After this Outlook opens and is working, there's one more error though. After a while an security warning pops up with the message: "Information you exchange with this site cannot be viewed or changed by others. However, there is a problem with the
site's security certificate. * The security certificate was issued by a company you have not chosen to trust. View the certificate to determine whether you want to trust the certifying authority. * The security certificate is valid. * The name on the security
certificate is invalid or does not match the name of the site."
Strangest thing is, it is the certificate of my RDS! It isn't my valid en officially bought certificate from my mailserver. What's going on? I'm out of options, what I've tried so far (in random order):
- restarting mailserver and AD;
- restarting switches;
- restarting routers;
- restarting RDS, AD and all other servers;
- bypassed proxyserver for RDS;
- created a new profile;
- checked recently installed updates;
- checked certificate on mailserver;
- checked RDS on a different location, working fine.
Nothing helped, what can I do next? Please advice.
Regards.

Found a thread that solves half my problem (https://social.technet.microsoft.com/Forums/office/en-US/70d18244-889a-4d95-ac3f-e234672a82b2/there-is-a-problem-with-the-proxy-servers-security-certificate-error-when-starting-outlook?forum=exchangesvrclients).
The first message can be suppressed by adding this to the Exchange config:
set-outlookprovider -Identity EXCH -CertprincipalName msstd:webmail.domain.tld
set-outlookprovider -Identity EXPR -CertprincipalName msstd:webmail.domain.tld
Giving the command get-outlookprovider, gives me empty information regarding the certprinipalname. Filled
this and after recreating the profile or deleting the ost-file I still have the second alert with the local certificate of my RDS.
Not completely where I want to be, any help regarding the second alert is greatly appreciated!

""selected font failed during last operation." and " there is a problem with generator" application error

For PSDs I have created in older versions of Photoshop CC 2014 I am getting errors when opening / trying to save. They seem to be either Generator or font related. Interestingly, PSDs created in newer versions of PS CC 2014 have no issues, even when using same fonts.
I am getting the error messages:
When I open the older PSD files, (again created or saved in older versions of PS CC 2014) I am asked to update fonts. If I do I get the error.
'Selected font failed during last operation'
When I try to don't try to update fonts and then I try to play with the file I get the following error.
'There is a problem with Generator. Please quit Photoshop and try again. If the problem persists, remove any third-party plugins or try re-installing photoshop.
I don't have any third party plugins that I can see.
I have re-installed multiple times.
I need to use this program and I am paying for your services. I am actually on the phone now with 'help desk' and have been on hold for 22 minutes.
Please Help

When I installed the Apple programs, mobile device application did not uninstall by itself. I had to go to c://program files/common files/apple/mobile device application (or something like that) and manually delete the contents and the folders. I have a 64 bit version so I also had to visit c://program files (x86)/common files/apple/mobile application device (or similar) and also manually delete the files and folders. I had to delete the files before I could delete the folders. This manual part is probably tripping everyone up, because it's not as easy as simply hitting uninstall in the control panel. But the instructions are there. I hope this helps you.

I have been having problems with my iPod touch and my WRT...

I have been having problems with my iPod touch and my WRT54G router. I am so frustrated right now because after following the various steps mentioned in one of these threads, following Earthlink's prompts, and speaking with Apple, my iPod touch will still not work. It is connected to the internet but will not download the pages. It is quite frustrating. I have changed from WPA to WEP, I switched the 4th Generated key to the 1st. I've disabled this, enabled that. I've done just about everything. I updated the firmware. I made the switch from a partial bridge to a full bridge. Still nothing seems to work. Does anyone have any other suggestions? The one thing I have not done is enter the Apple code into the iPod which searches for website...-- I cannot access the internet with my iPod so this web address does not work. If anyone has been successful, will you please give me step by step instructions? Yesterday I was on the phone with Linksys for about an hour. Before that with Apple for about an hour and before that with Earthlink. How it is that I can walk into a Bread Co. or Apple Store and immediately connect to the internet with my iPod but I can't in my own house?? Everyone seems to think it is someone else's problem so I've gone around and around. Not one of the Linksys support personnel suggested I look here on this community forum. I had to pay the $9 fee to have advanced Linksys help but still my iPod does not work and when I called back, the man I spoke with seemed to think the case was closed because my PC, Laptop, and iPod are connected to the internet -- the iPod just won't download the webpages or get mail. My iPod's IP address begins with 192. I would appreciate any help on this matter
Message Edited by AlliW on 10-02-2008 02:06 PM

I had the same issues with my iPod touch & iPhone. It's a known issue with the touch & Linksys G routers. Go into settings on the touch & do the following.
1. Settings - wifi - linksys
2. Erase your DNS settings & input same numbers as in router
Settings.
3. Http proxy should be
in off position.
4. Close out & open safari you should now have a wireless
connection.

Trying to set up encrypted mails but I'm confused about certificates and keys

Hello all,
My first foray into encrypted emails and I'm already confused! To begin with, I'm trying to exchange mails with one other person, who I believe uses Outlook. So far:
He's sent me his certificate (although I thought I would receive his public key) which is a file called smime.p7m. I don't know what to do with this.
I've successfully followed the instructions at https://support.mozilla.org/en-US/kb/digitally-signing-and-encrypting-messages. When I start a new mail, I can either go to the Enigmail menu and switch on encryption / digital signing and it seems fine, or I can go to the dropdown on the S/MIME button and it says "You need to set up one or more personal certificates before you can use this security feature." Are these two different ways of doing the same thing (in which case I'll use the one that works!) or not?
As you can see, I'm getting confused between keys and certificates! If some kind person could take a minute to explain what my next steps are, that would be much appreciated. I couldn't find anything on the Thunderbird support pages, though I know I need to send him my public key.
Thanks in advance.
Stuart.

Stuart8, good find, that article.
I found the main disincentive to using the built-in S/MIME capability is that it's not immediately obvious where to get your certificate and keys. Most providers want $$$ for them, which is natural enough if they are actually going to validate you in some way. I did at one time have a Thawte certificate and even enough WOT vouches to be a low-grade WOT Attorney.
Once you have your key, it's a bit of a pfaff to install it into Thunderbird. You'll probably find that S/MIME is the default in business correspondence, since many businesses operate their own mail servers, ftp servers and so on and probably have an arrangement to generate self-issued certificates or to buy them on a commercial basis from a CA.
Enigmail/OpenPGP doesn't require any financial outlay on your part, but is harder to get your keys properly validated since there's not much of a formal WOT nor a reliable central registry. You generate your own keys and it's pretty much all based on mutual trust.
Since the two systems are incompatible, you need to have set up the same as whatever your correspondent is using.
I suspect that you have discovered that it's a two-way process. In order for a correspondent to send you an encrypted message, you must both be using the same system, and he must have your public key to encrypt his message, and you'll need his in order to reply with encryption. So yes, he needs to send you his public key for you to send to him, but what he sends to you needs YOUR public key.
Obviously, signing messages is a useful halfway house. I believe that you sign with your private key, and the recipient will have to download your public key to validate your signature. Whilst a signature doesn't safeguard your privacy, it goes some way to proving that the message came from who it says it came from and that it hasn't been altered in transit. (I really can't understand why banks, lawyers, insurance companies haven't picked up on these encryption and signing schemes. Perhaps they actually prefer all those awful phone calls where you need to struggle to recall supposedly unforgettable names and dates! ;-) )
In practice, I find that if you sign a message to an outfit who don't know what to do with it, their numpty anti-virus system will probably barf on the signature which it thinks is executable code and therefore must be a virus or worm. :-(

There is a problem with this connection's security certificate The remote computer cannot be authenticated due to problems with its security certificate. Security certificate problems might indicate an attempt to fool you or intercept any data you send

Hi,
I have this Windows 2008 R2 on which I installed remoteapp some years ago.
Now the certificate expired and I get the message
"There is a problem with this connection's security certificate
The remote computer cannot be authenticated due to problems with its security certificate.
Security certificate problems might indicate an attempt to fool you or intercept any data you send to the remote computer."
How should I renew the certificate? I already went to certification store and tried to renew certificate with same key but then it says "the request contains nor certificate template information".
Please advise.
J.
J.
Jan Hoedt

Does the computer account have Enroll permission to the certificate template?
From the Server running your CA, run mmc, click File then Add/Remove Snap-in...
Add Certificate Templates and click OK.
Find the certificate template, then right click and select properties. On my CA its call ed RemoteDesktopComputers but might be called something different depending on what what template your certificate is based on.
On the security tab, click Oblect types, check Computers then OK. Enter the Computername and click OK. Then give your computer account Enroll permisssion.
HTH,
JB

How to display data with the same text and key in the drop down list?

Hi All,
Would like so to seek for you advice on the above mention topic. How to display the data with the same text and key using function module 'VRM_SET_VALUES'. From my testing by writing a program, this function module will only show the text and key if both have different data. Please find the coding as below. Is the normal behaviour of this function module? How to overcome this problem? Thanks in advance.
REPORT ZTESTING.
TYPE-POOLS: VRM.
DATA: NAME TYPE VRM_ID,
      LIST TYPE VRM_VALUES,
      VALUE LIKE LINE OF LIST,
      c(20) type c.
*      c = 'select any'.
data:begin of itab occurs 0,
      kunnr like kna1-kunnr,
      name1 like kna1-name1,
     end of itab.
data:begin of jtab occurs 0,
      kunnr like kna1-kunnr,
      land1 like kna1-land1,
     end of jtab.
PARAMETERS: p_list(20) AS LISTBOX VISIBLE LENGTH 20
                          default 'SELECT'.
AT SELECTION-SCREEN OUTPUT.
NAME = 'p_list'.
VALUE-KEY = 'Name'.     "---> Data for key is the same with text
VALUE-TEXT = 'Name'.    "--> Data for text is the same with key
APPEND VALUE TO LIST.
VALUE-KEY = '2'.
VALUE-TEXT = 'Country'.
APPEND VALUE TO LIST.
CALL FUNCTION 'VRM_SET_VALUES' EXPORTING ID = NAME VALUES = LIST.
start-of-selection.
select kunnr name1 up to 20 rows from kna1 into table itab.
select kunnr land1 up to 20 rows from kna1 into table jtab.
case p_list.
when '1'.
loop at itab.
write:/ itab-kunnr,itab-name1.
endloop.
when '2'.
loop at jtab.
write:/ jtab-kunnr,jtab-land1.
endloop.
endcase.
<Added code tags>
Moderator Message: Please use the "code" tags to format your code snippet.
Edited by: Suhas Saha on Nov 17, 2011 11:19 AM

shawnTan wrote:
Hi All,
>
> Would like so to seek for you advice on the above mention topic. How to display the data with the same text and key using function module 'VRM_SET_VALUES'. From my testing by writing a program, this function module will only show the text and key if both have different data. Please find the coding as below. Is the normal behaviour of this function module? How to overcome this problem? Thanks in advance.
>
>
REPORT ZTESTING.
>
> TYPE-POOLS: VRM.
>
> DATA: NAME TYPE VRM_ID,
>       LIST TYPE VRM_VALUES,
>       VALUE LIKE LINE OF LIST,
>       c(20) type c.
>
> *      c = 'select any'.
>
> data:begin of itab occurs 0,
>       kunnr like kna1-kunnr,
>       name1 like kna1-name1,
>      end of itab.
>
> data:begin of jtab occurs 0,
>       kunnr like kna1-kunnr,
>       land1 like kna1-land1,
>      end of jtab.
>
> PARAMETERS: p_list(20) AS LISTBOX VISIBLE LENGTH 20
>                           default 'SELECT'.
>
> AT SELECTION-SCREEN OUTPUT.
>
> NAME = 'p_list'.
>
> VALUE-KEY = 'Name'.     "---> Data for key is the same with text
> VALUE-TEXT = 'Name'.    "--> Data for text is the same with key
> APPEND VALUE TO LIST.
>
> VALUE-KEY = '2'.
> VALUE-TEXT = 'Country'.
> APPEND VALUE TO LIST.
>
> CALL FUNCTION 'VRM_SET_VALUES' EXPORTING ID = NAME VALUES = LIST.
>
> start-of-selection.
> select kunnr name1 up to 20 rows from kna1 into table itab.
> select kunnr land1 up to 20 rows from kna1 into table jtab.
>
> case p_list.
> when '1'.
> loop at itab.
> write:/ itab-kunnr,itab-name1.
> endloop.
>
> when '2'.
> loop at jtab.
> write:/ jtab-kunnr,jtab-land1.
> endloop.
> endcase.
>
> <Added code tags>
>
> Moderator Message: Please use the "code" tags to format your code snippet.
>
> Edited by: Suhas Saha on Nov 17, 2011 11:19 AM
This surely seems to be a bug to me(if not by design), did you check for any SAP notes? Perhaps a front end trace can help(Note 407743) !
-Rajesh.

Problem with generate sine 50 Hz

I have a problem with generate sine voltage with freq 50 Hz.
I form waveform with this frequency and sent in to the "AO Write" with update rate equal waveform lenght*frequency. And so I have a cycle of my program 20 ms, but I need a cylce 5 ms.
How I can make it right?
I forming my waveform "Basic Function Generator" with sampling Info equal my waveform lenght.
Message Edited by Unk on 09-28-2005 02:36 PM

The
amplitude
phase
frequency
of the signal are independent parameters.
You can generate the relevant signal using Basic Function Generator VI, then supply this waveform to your AO operation (DAQmx write is polymorphic and allows you to use a waveform directly as the input - those guys at NI are clever )

Problem with Upload PEM certificate

Dear Mister
I tried today to upload certificates and keys, from FTP server toward ACE LB. This was the show:
CL-LB-ACE-02/C1#
CL-LB-ACE-02/C1# crypto import ftp 172.23.107.5 admin dicom.cl.pem dicom.cl.pem
Password:
Passive mode on.
Hash mark printing on (1024 bytes/hash mark).
Successfully imported file from remote server.
Error: File not of recognized types - PEM, DER or PKCS12, import failed
Well. I have a little question.
a) The file is .PEM. Why is the reason for failed import?
b) I have a doubt. In this case we need to migrate certificates and key from the server toward the ACE.
The server is AIX IPLanet. The repository are key3.db / cert8.db
In this case, what need to do the customer, in order to can migrate in PEM type toward the ACE.
Best Regards

Hi Rodrigo,
I think you again need to generate CSR & Key on ACE.
1. We need to provide CSR & key to CA.
2. CA provides us the certicate and that we need to upload on ACE.
Please go through the below URL
http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/ace/v3.00_A2/configuration/ssl/guide/aceSSLgd.pdf
Regards

Problems with Apple ProRes 4444 and alpha channels in Motion 4 after upgrade to Snow Leopard. Has anyone seen this?

We've just now upgraded from Leopard to Snow Leopard and are having a problem with Apple ProRes 4444 and alpha channels in Motion 4. A clip with an alpha which keyed perfectly before the upgrade, now will not key. If I convert the clip to the Animation codec, it keys perfectly. If I export the Motion project as a ProRes 4444 self contained movie, it will key when brought into FCP 7 but if I import the project into FCP 7, it will show the key in the viewer but not the canvas. Has anyone seen this or have any suggestions on how to correct this? Is it a bug?
Thanks,

Motion 4.0.3
It just doesn't seem to recognize the alpha at all.

Very big problem with JSF about FORM and "id=" for HTML form's elements and

I have discovered a very big problem with JSF about FORM and "id=" for HTML form's elements and java instruction "request.getParameterNames()".
Suppose you have something like this, to render some datas form a Java Beans :
<h:dataTable value="#{TablesDb2Bean.myDataDb2ListSelection}" var="current" border="2" width="50%" cellpadding="2" cellspacing="2" style="text-align: center">
<h:column>
<f:facet name="header">
<h:outputText value="Name"/>
</f:facet>
<h:outputText id="nameTableDb2" value="#{current.db2_name_table}"/>
</h:column>
</h:dataTable>
Everything works fine...
Suppose you want to get the name/value pairs for id="nameTableDb2" and #{current.db2_name_table} to process them in a servlet. Here is the HTML generated :
<td><span <span class="attribute-name">id=<span class="attribute-value">"j_id_jsp_1715189495_22:0:nameTableDb2">my-table-db2-xxxxx</span></td>
You think you can use the java instructions :
Enumeration NamesParam = request.getParameterNames();
while (NomsParam.hasMoreElements()) {
String NameParam = (String) NamesParam.nextElement();
out.println("<h4>"++NameParam+ "+</h4>);
YOU ARE WRONG : request.getParameterNames() wants the syntax *name="nameTableDb2" but JSF must use id="nameTableDb2" for "<h:outputText"... So, you can't process datas in a FORM generated with JSF in a Servlet ! Perhaps I have made an error, but really, I wonder which ?
Edited by: ungars on Jul 18, 2010 12:43 AM
Edited by: ungars on Jul 18, 2010 12:45 AM

While I certainly appreciate ejb's helpful responses, this thread shows up a difference in perspective between how I read the forum and how others do. Author ejb is correct in advising you to stay inside JSF for form processing if form processing is what you want to do.
However, I detect another aspect to this post which reminds me of something Marc Andreesen once said when he was trying to get Netscape off the ground: "there's no such thing as bad HTML."
In this case, I interpret ungar's request as a new feature request. Can I phrase it like this?
"Wouldn't it be nice if I could render my nice form with JSF but, in certain cases, when I REALLY know what I'm doing" just post out to a separate servlet? I know that in this case I'll be missing out on all the nice validation, conversion, l10n, i18n, ajax, portlet and other features provided by JSF".
If this is the case, because it really misses the point of JSF, we don't allow it, but we do have an issue filed for it
https://javaserverfaces-spec-public.dev.java.net/issues/show_bug.cgi?id=127
If you can't wait for it to be fixed, you could decorate the FormRenderer to fix what you want.
I have an example in my JSF book that shows how to do this decoration. http://bit.ly/edburnsjsf2
Ed

I'm Having problems with the video freezing and the sound carrying on since I up graded my iPad to ios8 BBC IPLAYER

I Am having problems with the video freezing and the sound carrying on whilst watching BBC IPLAYER ITV PLAYER until I reboot video and the problem acures again

Your Mac runs maintenance in the background for you.
Command + R gives you access to restore, repair, or reformat the drive using OS X Recovery
No idea why that was suggested.
You may have a third party video player installed that's causing an incompatibility issue.
Check these folders:
/Library/Internet Plug-Ins/
/Library/Input Methods/
/Library/InputManagers/
/Library/ScriptingAdditions
~/Library/Internet Plug-Ins/
~/Library/Input Methods/
~/Library/InputManagers/
~/Library/ScriptingAdditions
The first four locations listed are in the root-level Library on your hard disk, not the user-level Library in your Home folder.The tilde (~) represents your Home folder.
To access the Home folder in OS X Lion or Mountain Lion, open the Finder, hold the Option key, and chooseGo > Library.

Problems with Cocoon 2.03 and Weblogic 6.1 SP3

I am having problems with Cocoon 2.03 and Weblogic 6.1 SP3, when I try to deploy
the cocoon.war.
Cocoon works fine when I unpack the cocoon.war into ...\mydomain\applications
(after I changed cocoon.xconf to use the following transformer factory: org.apache.xalan.processor.TransformerFactoryImpl).
However, when I deploy the cocoon.war through the weblogic console and try to
invoke cocoon (http://localhost:7001/cocoon/) I get the following error:
ERROR (2002-09-26) 11:28.40:859 [sitemap] (/cocoon/) ExecuteThread: '7' for
queue: 'default'/Handler: Error compiling sitemap
java.util.zip.ZipException: The system cannot find the file specified
     at java.util.zip.ZipFile.open(Native Method)
     at java.util.zip.ZipFile.<init>(ZipFile.java:110)
     at java.util.zip.ZipFile.<init>(ZipFile.java:125)
     at weblogic.utils.zip.ZipURLConnection.getInputStream(Handler.java:49)
     at org.apache.cocoon.components.source.URLSource.getInputStream(URLSource.java:151)
     at org.apache.cocoon.components.source.URLSource.getInputSource(URLSource.java:223)
     at org.apache.cocoon.components.language.generator.ProgramGeneratorImpl.generateResource(ProgramGeneratorImpl.java:318)
     at org.apache.cocoon.components.language.generator.ProgramGeneratorImpl.createResource(ProgramGeneratorImpl.java:282)
     at org.apache.cocoon.components.language.generator.ProgramGeneratorImpl.load(ProgramGeneratorImpl.java:196)
     at org.apache.cocoon.sitemap.Handler.run(Handler.java:228)
     at java.lang.Thread.run(Thread.java:484)
I understood that there were problems when the cocoon.war file that did occur
when you unpacked the war, but I believed that these problems did not occur with
WLS6.1 SP3.
Has anyone else encountered this problem and solved it? Any help would be greatly
appreciated.
Thanks in advance.
Paul

This how I got Cocoon 2.04 up and running on WLS 6.1.4
Download the Cocoon source from http://xml.apache.org/cocoon/dist/
Remove all but the following JARs from lib/optional:
commons-jxpath-1.0.jar
jing-20020724.jar
resolver-20020130.jar
servlet_2_2.jar
commons-logging-1.0.jar
jtidy-04aug2000r7-dev.jar
rhino-1.5r3.jar
xt-19991105.jar
Update lib/jars.xml to reflect these changes
Issue build commands:
./build.sh clean (Note: Always clean first!)
./build.sh -Dinclude.webapp.libs=yes -Dexclude.webapp.samples=yes -Dexclude.webapp.documenation=yes
-Dexclude.webapp.javadocs=yes webapp
Copy the following JARs to your WLS instance’s lib directory:
xercesImpl-2.0.0.jar
xml-apis.jar
xalan-2.3.1.jar
xt-19991105.jar
java/lib/tools.jar
Sample of config/SERVER_NAME.setenv
LIB=/path/to/lib
JARS=$LIB/xercesImpl-2.0.0.jar:$LIB/xml-apis.jar:$LIB/xalan-2.3.1.jar:$LIB/xt-19991105.jar:/opt/java1.3/lib/tools.jar
JAVACLASSPATH=$JARS:.:$JAVACLASSPATH
JAVA_HOME=/opt/java1.3
Deploy the resluting cocoon.war and you should have a Cocoon up and running that
can do the XML->HTML Hello World sample. The status page works fine too.
My advice is to launch this stripped configuration first and if needed add more
features later by adding the JARs of your choice to the class path (or add the
to your webapp-build if you are confident that WLS are capable of handling their
manifests).
Good luck
/Peter
"Paul Petley" <[email protected]> wrote:
>
>
I am having problems with Cocoon 2.03 and Weblogic 6.1 SP3, when I try
to deploy
the cocoon.war.
Cocoon works fine when I unpack the cocoon.war into ...\mydomain\applications
(after I changed cocoon.xconf to use the following transformer factory:
org.apache.xalan.processor.TransformerFactoryImpl).
However, when I deploy the cocoon.war through the weblogic console and
try to
invoke cocoon (http://localhost:7001/cocoon/) I get the following error:
ERROR (2002-09-26) 11:28.40:859 [sitemap] (/cocoon/) ExecuteThread:
'7' for
queue: 'default'/Handler: Error compiling sitemap
java.util.zip.ZipException: The system cannot find the file specified
     at java.util.zip.ZipFile.open(Native Method)
     at java.util.zip.ZipFile.<init>(ZipFile.java:110)
     at java.util.zip.ZipFile.<init>(ZipFile.java:125)
     at weblogic.utils.zip.ZipURLConnection.getInputStream(Handler.java:49)
     at org.apache.cocoon.components.source.URLSource.getInputStream(URLSource.java:151)
     at org.apache.cocoon.components.source.URLSource.getInputSource(URLSource.java:223)
     at org.apache.cocoon.components.language.generator.ProgramGeneratorImpl.generateResource(ProgramGeneratorImpl.java:318)
     at org.apache.cocoon.components.language.generator.ProgramGeneratorImpl.createResource(ProgramGeneratorImpl.java:282)
     at org.apache.cocoon.components.language.generator.ProgramGeneratorImpl.load(ProgramGeneratorImpl.java:196)
     at org.apache.cocoon.sitemap.Handler.run(Handler.java:228)
     at java.lang.Thread.run(Thread.java:484)
I understood that there were problems when the cocoon.war file that did
occur
when you unpacked the war, but I believed that these problems did not
occur with
WLS6.1 SP3.
Has anyone else encountered this problem and solved it? Any help would
be greatly
appreciated.
Thanks in advance.
Paul

Certificate and Key Expiration information regarding your Access Control Service (ACS) 2.0 Namespace

I've received an email from Windows Azure Team ([email protected]) with the above title. It suggests
I
We are writing to inform you that certificates or keys related to one or more of your Namespaces are about to expire between July 8, 2012-November 8, 2012.
Please find below the list of your Namespaces that need Certificate or Key rollover:
fiftyeggs-cache
These namespaces can be viewed by signing in to your Windows
Azure portal subscription. After you have signed in you are redirected to the Management Portal page. On the lower left-hand side of this page, click Service Bus, Access Control & Caching. To see
the registered namespaces under your subscription, under Services click Access Control/Service Bus/Caching.
However, this is a cache-namespace which appears to be a Managed Namespace
http://msdn.microsoft.com/en-us/library/gg185943.aspx and I don't believe there is any way of managing keys. Can anyone help or point me to the relevant article. I don't want the cache keys to expire (the site will die) but there doesn't appear to
be any actions for me to take.

Did you add a X509/Symmetric Key/Password based "Service Identities" (Re Carson Wa above). If not, my year
is up on the 27th so I'll schedule for random failures! That will not keep my clients happy.
Can you keep us informed of the progress of your ticket here please :-)
I got an email from MS yesterday...
We inadvertently sent an email message to you between June 12 and June 18, 2012, that
described updating expiring certificates and keys in the Access Control Service (ACS) namespaces used by your Service Bus or Cache namespaces. The message referred to the following namespaces:
fiftyeggs-cache
The message was sent in error, and we sincerely apologize. No action is required.
Did you get that?
Andrew

Problem with Generate a certificate and Key

Similar Messages

Maybe you are looking for