Problem with GTX 560Ti Twin Frozr II OC SLI

Hi. I just bought another GTX 560 Ti Twin Frozr for SLI and when I ran BF 3, the images are shaky. Here's my specs:
i7 920 2.66GHz
Asus P6T
6 x 2GB Corsair 1600 DDR3
2 x GTX 560Ti Twin Frozr II
1TB Seagate Barracuda 7200
Windows 7 Pro 64bit
Cooler Master Silent ProM 850W
I'm using the 290.36 beta driver (the others failed as well).
My motherboard BIOS is the latest version (1408). My GPUs have different BIOS (I bought the first in Feb and the new one today), is that the issue? The problem isn't just in BF 3, I also have it in Skyrim.
Thanks!

Quote from: Keno117 on 12-December-11, 03:15:23
hi svet. yeah, the problem doesn't appear with fraps screen shots.
this mean that issue is caused by your monitor. [or sli brigde issue]
have you tested each vga alone?

Similar Messages

GTX 560Ti Twin Frozr II Artifacts problem

Hey guys,
i am getting weird artifacts with my card i have flashed all two bios provided by svet but still no good, it happens randomly but it happens most when i turn off the game or decrease load on graphic card.I have already sended my card to msi earlier but they sent me the same card again and told me it will work now but it is not working. any helps please
My specs
Core i7 3770K
Asus Maximus Gene V
8gb 1866 gskill ddr3 ram
MSI GTX 560ti Twin frozr II oc
I have CM 600watt power plus psu but i changed the psu to cm thunder 600w and still getting this problem.
Tried Everything different drivers,different bios, but i borrowed Sapphir ATi 4870 from my friend and it worked perfectly but this card is giving a real hard time.
This is what i am getting all the time and sometimes bsod Plz help me

flobelix
The artifacts are at random time sometimes it even shows on when i am just on desktop doing nothing, but these days it normally comes up when the card is on full load or about to get more load.Tested on 1333 mhz as well same result and i7 is running on default frequency 3.5 normal and 3.9 Turbo.
Svet
I have got this maximus gene V mobo 2 days ago its new brand i am also having this same problem in my previous mobo.Tried like 10-15 drivers ranging from msi site to nvidia offical site and still got this same problem.
and btw thank u so much svet for giving me your valuable time.its really good to have u in msi ^^

MSI GeForce GTX 560Ti "Twin Frozr II" crash at 50 degrees Celsius

I get artifacts (pink squares all over screen) in heaven benchmark, fluid benchmark and gta 4, a few seconds later I get a black screen and then an error message there windows tell me the driver has crash but praise msi it was successfully recovered. All this then the card is nearing 50 degrees Celsius.
I have:
MSI GeForce GTX 560Ti "Twin Frozr II", (BIOS: 70.24.0a.00.00)
Gigabyte GA-890GPA-UD3H, Socket-AM3
AMD Phenom II X4 965 Black Edition
Corsair Powersupply 650W Black,ATX/EPS
Corsair XMS3 DDR3 1600MHz 4GB CL9
Windows 7 64bit (with sp1)
DC OUTPUT +3.3V +5V +12V -12V +5Vsb
MAX LOAD 24A 30A 52A 0.8A 3A
I tested driver on msi site and the latest nvidia driver, even tested some beta driver. All give the same result as stated above. I also tested to set the clocks at reference speed but no go. Also tested voltage at 1025.

Got a new card today, same card but new.
No problems now, seem the new card has newer bios and lower core voltage. Maybe that is a way to fix it, just upgrade bios.

MSI GTX 560Ti TWIN FROZR II 1GB GDDR5

Currently I'm experiencing a problem where no matter what I'm doing, whether it is gaming or browsing, green/orange chequered squares appear exactly as in the picture below:
The problem lasts for a matter of seconds and then windows informs me that the drivers have recovered from a failure. This is very remininsant, but not identical, to when I had a 9800GT that died. This issue has only started within the last month and the card is over 6 months old. Is this likely to be a GPU issue?
M4N72-E Windows 7 64 Bit Phenom II X4 950 3.0Ghz
Kingston Hyper-X 1066Mhz CL5 8GB @ 800Mhz CL4
MSI GTX 560Ti TWIN FROZR II 1GB GDDR5
Inno3D GT240 512MB GDDR5 iChill
Sony AD-7240S 24x DVD±RW DL & RAM SATA Optical Drive - OEM Black
Seagate ST3500418AS 500GB Hard Drive SATAII 7200rpm 16MB Cache - OEM
Thermaltake 500W PSU

Sadly I've no way of testing the card in another PC or a different PSU.
What is the likelihood that it is the PSU even though the card has been performing flawlessly for almost a year? Also I could understand if it was causing artifacts just when gaming due to power load, but it happened when I was merely surfing the net, where power draw doesn't even reach 300W.
Is a known solution to this issue an increase in Watts or is there a chance that it is a problem with the GPU?

MSI nVidia GTX 560ti Twin frozr III loss of output

Hi folks,
I recently needed my monitor to test another rig and upon plugging it back in I discovered my MSI nVidia GTX 560ti Twin frozr III no longer has video output, I have tried different outputs, different cables, different displays and different motherboard slots to no avail. Had a search around and couldn't find any other instances of this. The card is 2 years old now but has always functioned perfectly (apart from the well publicised memory temperature problem). Any ideas what might be causing this issue?
Regards,
hotrats
Specs:
Windows 7 PRO SP1 64bit
AMD FX-8350 8 Core Black Edition Processor 4.57gHz OC
ASUS M5A99X EVO Motherboard R2
MSI nVidia GTX 560ti Twin frozr III
Corsair Vengeance 2x4GB DDR3
Thermatake 750W Evo_blue 2.0
I'm assuming drives and case aren't the issue so not listing them.

The card is 2 years old, but how long wasn't it used for and did you ever had any problems with it?
First of all, I would reset CMOS >>Clear CMOS Guide<< so all the OC is removed (write down settings of CPU OC if you want to use it later on).
Then (I don't know Asus boards) would look through the BIOS if it recognises the card. Possible you should get rid of the possible dust in PCIe slot?
Also: while card is plugged in, run computer and: try all the video ports, even those on motherboard (maybe board doesn't recognise the card and wants to run integrated gpu if there is any).
Last but not least: ask a friend/colleague if you can test your card in their computer. Best if it would be different brand of motherboard, and power supply. Possibly power supply is screwed up somewhere (broken connection)and doesn't deliver enough power to give output.
Does the card start up when you run the PC (fans of the card)?

A Few Questions About The GTX 580 Twin Frozr/OC in SLI

Hi everyone!
I have a few questions if you guys don't mind answering them, first thing though to make it clear this system is not built yet but the build will start soon.
My first question is whether or not this PSU is capable of running two GTX 580 Twin Frozr/OC in SLI:
http://www.newegg.com/Product/Product.aspx?Item=N82E16817139015&Tpk=AX850
+3.3V@25A, +5V@25A, +12V1@70A, [email protected], +5VSB@3A
My second question is whether or not the GTX 580 Twin Frozr/OC will come with a SLI bridge connector long enough to accomplish a connection over this distance:
If not where can I buy a bridge capable of accomplishing this?, the reason for this distance is to keep the bottom card from pushing air onto the top one.
The above is a normal ATX form factor motherboard or to be more specific a ASRock P67 EXTREME6.
http://www.newegg.com/Product/Product.aspx?Item=N82E16813157231

Quote
EDIT-
I'm looking at the picture right now and it looks like the bridge that comes with the motherboard is not long enough, any suggestions on where to buy one?
nope no idea, ask your reseller
Quote
I didn't mean the Watts I mean the Amps, from other threads in this board it seems that some PSU's aren't up to the task of supplying the card with enough Amps, I was wondering if that PSU could supply enough for both.
Well you can figure from the graph
With one VGA it drains total 447W, where single 580GTX need 40A-42A,
adding second the same VGA to the system drains total 719W
So 719-447=272W, 272W/12=23A, 42A+23A=65A
or simple 719/12=60A
Quote
BTW, I would also like to say I'm currently using a MSI board in my current build and I love it!

MSI GTX 560Ti twin frozr II OC high Temperature after RMA

Hey guys,
I have an MSI GTX 560ti Twin Froz II OC card which was giving me weird artifacts on desktop and many random places so i send the card to rma.They replaced it with a same model MSI GTX 560ti Twin Froz II OC card but since i got this card i am getting very high temperatures like it reaches 90-95 C in 10 minutes and keep rising with fan speed 100% in games like Dota 2,Grid 2 and many other games so is there anything i can do to solve this problem.
My Nvidia Driver Version- 320.14 i have even tried 320 but the same result.
My Gpu Screenshot
My bios file https://hotfile.com/dl/225315714/b7fd67b/GF1.html
Any bios upgrade might help?

its showing me the same version i have checked using nbitor.What do u think can be the problem of temperature rising so fast nearly 90+ in 1 min any guesses? cause my old 560 was working perfectly should i go and rma again?

GTX 560ti Twin Frozr II - Dual Screen Issue + Silent fan speed

Hi, sorry for my bad english :p
CPU : Intel 2500k
Ram : 2x2go Ripjaws 1600mhz
Mb : Asus P8P67-M Pro
GPU : 560 gtx ti twin frozr II
EPU : Corsair 520w
1 - DUAL SCREEN
My first problem is that i can't use a true extended monitor configuration (1 dvi + 1 vga, 1920*1080 + 1280*1024).
Dual monitor work in CLONE MODE but not in extended.
Extended mode use 1 monitor or turn to clone mode automatically :/
EXCEPT after a NEW driver installation. So if i want to use dual screen extended mode, i have to reinstall driver each time i boot...
I have use DriverSweeper in safe-mode but this trick don't work for me. I have the last nvidia driver 270 and i have try the 270 beta driver too.
Into game? That work fine (except some artifacts who appear occasionnaly (one time in metro 2033 and one time in battlefield bad company 2) but it's not fine for a new gpu i think :/)
Can you help me to fix that dual screen problem?
2 - SILENCE
My second problem is that i want a silent computer but the fan are too noisy.
Live Update don't find update for my vga bios (currently at 70.24.0A.00.00)
The SN is : 602-V238-16SB1101159115
Here is a link to my BIOS version extract with GPU-Z : http://skarzag.free.fr/bazar/GF114.bin
I don't know if it can help you :p
Thanks for you're help!

there will be a Tool for it avaiable on donation soon at: https://forum-en.msi.com/index.php?topic=148273.0

GTX 580 Twin Frozr 2 tri sli heat problem

Hi all,
I ordered 3 GTx 580 Twin frozr 2 OC from amazon and while i was checking on the card i found servral people saying these cards can run pretty hot in SLI or Tri SLI and the top card temp reach 100c!!! is it true should i be worried i already bought them im waiting for them to arrive with reset of my build. my PC case is Lian Li P80B.

Of course they are hot.
Each of them has 244 tdp. It's 750 wt from graphic cards alone.
Even some electric heaters consume less.
If you are planning to have this kind of setup (with no space left for the upper card to "breathe"):
http://www.dvhardware.net/news/nvidia_geforce_gtx_280_3_sli.jpg
http://www.pcgameshardware.com/screenshots/original/2008/11/X58_3-Way-SLI.jpg
http://www.xard.ru/post/16312/SLI3.jpg
No doubt you will get 90+ C in heavy loads.
PS: What is your motherboard? You should also know that p67/z68 chipsets offer maximum 8/8/4 PCI-E lines for 3 sli. 8 is ok, but 4 is

Problem with hd R7850 twin frozr 2gd5

when gaming sometimes my pc locks up with a black screen and sound stuck in a very small loop and cant do anything apart from manually resetting my pc or killing the power. It was happening occasionally with sleeping dogs (although after lowering the quality settings well below the recommended its fine now) and has also happened on a couple of rare occasions with Black ops 2. I recently installed Far Cry 3 and literally every time i play it after around 5 min i get this issue. I have the latest beta drivers from ati installed and the game is fully updated. I tried lowering the resolution and quality settings but after aroun 20 mins of play it happend again i only purchased the card in sept and am very disgruntled to say the least. What would be the best method to identify the cause of the problem and more importantly fix it or avoid it happening to me again?

>>Posting Guide<<

Msi GTX 560 Twin Frozr II - Problem

Hey folks,
Im having a problem with my Msi GTX 560 Twin Frozr II video card.
I can't make it work with my monitor, all I get is "No signal detected"
I know the monitor is fine, because I used it as it worked all good when I plugged it into
my laptop. It's a BenQ G2222HDL monitor btw. It has one VGA (D-sub) and one Dvi-D input.
So i've tried all types of cables (VGA, Dvi-D and even Hdmi cables), and
still, can't get no signal. What can I possibly do to make things work?
Also, my computer acts a bit wierd when it's starting up. Usually, I would turn it on, then it would turn itself off really quick. Then I turn it on again,
and it goes just fine and runs smoothly. After I changed the position of some RAM modules
and such, it changed. Now when I turn it on, the fans spin for 1 and there's just a tiny bit of noise until
it turns itself off. Then I turn it on again, and it goes just fine with all fans and stuff spinning.
So, I really need some help!

Cpu - Intel i5 2500k, 3,3GHz, Socket LGA1155, 6MB with Noctua DH-14 CPU Cooler
Motherboard - ASUS P8P67 PRO, Socket-1155, ATX, P67, DDR3, 3xPCIe(2.0)x16, CFX& SLI, SATA 6Gb/s, USB 3.0, FW, BT, EF
Memory - Corsair XMS3 DDR3 4GB 1600MHz CL 9 (2x2GB kit)
Video card - MSI GeForce GTX 560Ti 1GB PhysX, PCI-Express 2.0,"Twin Frozr II", GDDR5, 2xDVI, native-miniHDMI, CUDA, 256bit (GF 114, overclocked to 880 Mhz on the core), (Marketing name; N560GTX-Ti Twin Frozr II/OC)
Harddrive 1 - Crucial Real C300 (64GB - 355/75 Mb/s read/write) SSD
Harddrive 2 - Samsung Spinpoint F3 7200RPM, SATA 3.0 Gbps, 3,5", 16MB Cache, 8.9ms
Chassis - Fractal Define R3 Black Pearl Mid tower chassis (ATX, mATX, mITX) with two 120mm fans
Power Supply - Corsair HX Series 750 Watt Modular 80 plus silver (ATX 12v 63 amp)
Haven't got a chance to install os, but will install Windows 7 64Bit.
The monitor is a BenQ 21,5" LED G2222HDL (1920 x 1080, 5000000:1, 5ms, VGA/DVI-D)
More background info; I build the computer myself. Everything went mostly fine, except for that I had to spend quite a long time to get everything right.
I started the machine, and it all went just fine (except for rebooting and then running smoothly, as it has done ever since). I did the MemOK! test and everything seemed to be fine. But when using the VGA cable that came with the monitor, I couldn't get any signal detected (I used a VGA to DVI adapter to plug the VGA cable into the Msi 560 TI videocard). I used 2 different adapters, but nothing happened. I tried with a HDMI cable, just to test, and that did not work either. Then, I figured out I should order a DVI-D cable.
So I ordered the cable, and went on to plug it into my monitor and my video card, no adapters needed. Still, no signal at all! Tried a different monitor to check if it was the monitor's fault. Nope, still no signal. Frustrated, I used the VGA cable again and tried to plug the monitor into the laptop, which worked just fine. A clear, bright image appeared. But not with my desktop computer with the Msi GTX 560 Twin Frozr II. Nothing works when I plug in the cables etc. No signal at all, although the computer itself seems to run just fine with fans spinning up and the different components making noise etc. Thus, I figured out there probably was something wrong with my Msi Geforce GTX 560 TI Twin Frozr II. Now I dont really know what to do.
Does anyone have an answer/advice/possible solution to my problem? I'm getting a tad frustrated now, seeing as I bought this computer 2 weeks ago and still haven't got to use it yet.

Gtx 580 twin frozr II/oc problem

I'm having problem with my gtx 580 twin frozr II/OC. everything is running fine but it crushes or video card lose focus when I run 3dmark 11 or try to play crysis. video output works fine, it plays metro 2033, star craft 2, dead space 2 just fine. It passed 1 hour of furmark stability test fine, 1 hour of OCCT test fine, passed OCCT memory test fine too. I didn't overclock it so it's at factory overclocked speed of 823mhz and idle temp is at 35c, gaming max temp during metro 2033 is 77c, OCCT test max temp was 88c. so I know it's not overheating problem. I have used both nvidia driver or 263.09 and 266.58, same result. it crushes during cutscene or after cutscene of crysis(i hear sound but no visual) and lose focus after initial loading on 3dmark11. vga bio is 70.10.17.00.01 and i am running on windows 7 64 bit ultimate edition. yes, i have updated to latest version of crysis and 3dmark11 too. still, the same. Is something wrong with this card during manufacturer place or what? I don't think this is just my problem coz according to newegg review, there were customers complain about this card gets crush during crysis. I also own gtx 570 from other brand and I was using it b4 I've got msi gtx 580 twin frozr II/oc. It didn't have any problem like this. Anyone know what's causing this? any help? I don't think RMA would help this problem at all coz card is not broken and works fine on everything just fine with no error or artifacts besides those two(3dmark11 and crysis).

Quote from: shin777 on 13-February-11, 11:36:38
send serial # to who? to msi or u? i thought u are not from msi though(u said u aren't msi). i appreciate ur help either way though.
i did OCCT test too and it passed without error. i sent email to u about serial #. also what's max voltage i can use in overclocking this
gpu without frying? will i still covered in warranty if my gpu gets fried in long term use of 1.025v bio u are going to send me? thx.
Quote from: shin777 on 13-February-11, 14:53:04
602-V255-01SB1101008765
Quote
also what's max voltage i can use in overclocking this
gpu without frying?
OC is always risky and done at own risk.
Basically the max allowed from AB
We are not going to OC your card further,
but just to make it stable at default HW-OC speed
Quote
will i still covered in warranty if my gpu gets fried in long term use of 1.025v bio u are going to send me? thx.
Yes, should not be issue.
Get attached file, then check PM

MSI GTX 580 Twin Frozr 2/OC Problems

Hey guys, I just build my second new(er) computer (specs below, system 2), with this MSI GTX 580 Twin Frozr 2/OC, and I am having several problems. The first problem I noticed was was in Starcraft 2, I was having major texture stretching (looked like units were stretched across the map, exc.), so I tried a new driver to no avail. I delt with that problem and played for several hours to find that the screen turned black, then recovered (happened several times), which I was able to continue playing after. I went ahead and tried Battlefield Bad Company 2, and noticed the same texture stretching, but with big black shapes (almost looked like large artifacts), so I checked the temps, 74c, so that was not the problem. I continued playing for about 5 minutes before the screen went black, turned white, and the game became unresponsive. Thinking it was a possible PSU problem, I moved the card to my first system (specs below, system 1), and produced the same results.
Does anyone have any ideas, or is it time to RMA the card. Sad thing is, I am seeing alot of people having problems with this card, I hope MSI didn't do me wrong here.... :(
P.s. I flashed the newest BIOS for the VGA and the MoBo.

Quote from: doubleohseven on 12-September-11, 06:45:32
Unfortunately it has, and the artifacting only seems to get worse as time goes on (if the card/game doesn't crash right away that is...). I guess RMA'ing is my only option at this point, thanks for your help.
I'll chock it up to a defective card this time, but seeing all the problems with these similar cards from MSI is making me worried... I only hope MSI didn't do me dirty with this product.
No worries, call msi at +1.626.271.1004 within regular business days and they will take care of it

VBIOS with GOP/UEFI support for Geforce GTX 760 TWIN FROZR

Hi,
please provide a GOP/UEFI VBios for the GTX 760 TWIN FROZR
S/N: 602-V284-300B1309103551
NVFlash report:
NVIDIA Firmware Update Utility (Version 5.165)
Adapter: GeForce GTX 760 (10DE,1187,1462,2847) H:--:NRM B:01,PCI,D:00,F:00
The display may go *BLANK* on and off for up to 10 seconds during access to the EEPROM depending on your display adapter and output device.
Identifying EEPROM...
EEPROM ID (EF,3012) : WBond W25X20A 2.7-3.6V 2048Kx1S, page
Reading adapter firmware image...
IFR Data Size : 1112 bytes
IFR CRC32 : 8B7DF729
IFR Image Size : 1536 bytes
IFR Image CRC32 : 114B182D
IFR Subsystem ID : 1462-2847
Image Size : 99328 bytes
Version : 80.04.C4.00.30
~CRC32 : 1A372C64
OEM String : NVIDIA
Vendor Name : NVIDIA Corporation
Product Name : GK104 Board - 20040010
Product Revision : Chip Rev
Device Name(s) : GeForce GTX 760
Board ID : E115
PCI ID : 10DE-1187
Subsystem ID : 1462-2847
Hierarchy ID : Normal Board
Chip SKU : 225-0
Project : 2004-0010
CDP : N/A
Build Date : 06/04/13
Modification Date : 07/30/13
UEFI Support : No
UEFI Version : N/A
UEFI Variant Id : N/A
UEFI Signer(s) : Unsigned
Sign-On Message : GK104 P2004 SKU 0010 VGA BIOS (HWDIAG)
MSINV284MS.350
Thanks

Use the attached vbios.
Decompress the provided .rar archive with Winrar: http://www.rarlab.com/download.htm
Then flash the included file with Nvflash for dos: http://www.guru3d.com/files_details/nvflash_download.html
To do so rename the included file to .rom and create a dos bootstick (https://forum-en.msi.com/index.php?topic=165175.0)
Put nvflash and the vbios file on it and boot from the stick. Then type nvflash -4 -5 -6 gop.rom (if renamed vbios that way) and hit enter. Confirm the questions and let the tool flash.

Geforce GTX 570 Twin Frozr III PE/OC and BSOD

Hi,
I have an MSI Geforce GTX 570 Twin Frozr III PE/OC which appears to be causing system instability (graphical corruption upon boot i.e before windows), and BSOD. It typically occurs from a cold boot resulting in BSOD after the Windows logo. This will occur 2-3 times. The system then runs stably.
I have tracked this problem down to this card when running at x16 mode in my primary PCIe slot (slot 2, x16_1) on my motherboard. It does not occur if the card is in slot 5 (x16_2) where it only runs at x8 speed (2.5Gb/s rather than 5Gb/s). This does not occur if I place a borrowed Geforce GTX 260 in the primary PCIe slot (it runs at x16 fine and causes no such system instability).
I have tried out various mobo BIOS updates, checked all my system files, updated (and rolled back) my NVIDIA drivers, and checked my memory for errors with Memtest 86+. I cannot find any updates to my video card BIOS.
Can I assume the card is faulty, or does anyone have any other possible solutions?
Spec is:
Windows 7 64-bit
Intel I5-2500K
Asus P8Z68V-Gen 3 mobo
8Gb Corsair DDR3 1800 mem
MSI Geforce GTX Twin Frozr III PE/OC
Cheers!

Quote
Its a Corsair 750TX V2 (750 watt). I am also running 1 SSD, 2 hard drives and a blue-ray optical drive. You don't think its too much for the PSU do you?
The PSU its plenty enough
Quote
No I haven't tried it on another computer and I don't think its very likely I'll get the chance.
there is not much options then, except to RMA the card and to hope the problem to be there.
[else the problem will remain]

Problem with GTX 560Ti Twin Frozr II OC SLI

Similar Messages

Maybe you are looking for