Problem with hda-intel

Hi!
I'm posting a new topic because i'm sure anyone ever had this problem
I have a notebook amilo m1437 and i'm going to talk about the integrated subwoofer.. i noticed that it works only if the headphones are plugged in at boot.. seems that headphones work like a "switch" and turn on subwoofer
does anyone know how i can turn on subwoofer without this trick with headphones?!?! maybe settings something in /proc..
thanks for help in advance!!
Last edited by baghera (2007-08-26 18:56:55)

bump...

Similar Messages

Problem with i915 Intel driver panic..

Hello,
I just recently reinstalled Arch on my laptop. I have a problem with my laptop. When I went to install the Nvidia Optimus stuff and configure my Xorg.conf I was met with problems with the Intel Driver timing out. When I boot up I get the normal post screen, then grub, I then go to see the GDM login and instead of getting it I just get a black screen. When I remove the /etc/X11/xorg.conf.d/10-monitor.conf I can boot into Gnome Shell, else I have to switch run levels and login that way. I have every package up-to-date. And I haven't seen an /var/log/Xorg.0.log either else I would have posted it. One other thing is I have added my user account to the Bumblebee account. One other thing is when I move my web browser around my video flickers.. Any help I can receive with this would be greatly appreciated.
uname -a
Linux tux 3.17.1-1-ARCH #1 SMP PREEMPT Wed Oct 15 15:04:35 CEST 2014 x86_64 GNU/Linux
pacman -q xf86-video-intel:
xf86-video-intel 2.99.916-3
pacman -Q xorg-server
xorg-server 1.16.1-1
pacman -Q primus
primus 20131226-1
pacman -Q mesa
mesa 10.3.1-1
pacman -Q lib32-primus
lib32-primus 20131226-1
pacman -Q bbswitch
bbswitch 0.8-18
pacman -Q gdm
gdm 3.14.1-1
pacman -q systemd
systemd 216-3
dmesg | grep i915
[ 1.982842] i915 0000:00:02.0: irq 36 for MSI/MSI-X
[ 2.099424] [drm] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2
[ 2.127859] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 2.127862] i915 0000:00:02.0: registered panic notifier
[ 2.147795] [drm] Initialized i915 1.6.0 20140725 for 0000:00:02.0 on minor 0
/etc/X11/xorg.conf.d/20-intel.conf
Section "Device"
Identifier "Intel"
Driver "intel"
Option "AccelMethod" "sna"
Option "TearFree" "true"
Option "monitor-LVDS" "Monitor0"
BusID "PCI:0:2:0"
EndSection
/etc/X11/xorg.conf.d/10-keyboard.conf
Section "InputClass"
Identifier "Keyboard0"
MatchIsKeyboard "on"
Option "XkbLayout" "us"
Option "XkbModel" "pc104"
Option "XkbVariant" ",qwerty"
EndSection
/etc/X11/xorg.conf.d/50-synaptic.conf
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
/etc/X11/xorg.conf.d/10-monitor.conf
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Monitor"
Identifier "Monitor0"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Intel"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
sudo lspci -v
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) (prog-if 00 [VGA controller])
Subsystem: Dell Device 04c8
Flags: bus master, fast devsel, latency 0, IRQ 36
Memory at d1400000 (64-bit, non-prefetchable) [size=4M]
Memory at c0000000 (64-bit, prefetchable) [size=256M]
I/O ports at 7000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [d0] Power Management version 2
Capabilities: [a4] PCI Advanced Features
Kernel driver in use: i915
Kernel modules: i915
01:00.0 VGA compatible controller: NVIDIA Corporation GF108M [GeForce GT 540M] (rev a1) (prog-if 00 [VGA controller])
Subsystem: Dell Device 04c8
Flags: bus master, fast devsel, latency 0, IRQ 7
Memory at d0000000 (32-bit, non-prefetchable) [size=16M]
Memory at a0000000 (64-bit, prefetchable) [size=256M]
Memory at b0000000 (64-bit, prefetchable) [size=32M]
I/O ports at 6000 [disabled] [size=128]
Expansion ROM at d1000000 [disabled] [size=512K]
Capabilities: [60] Power Management version 3
Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [78] Express Endpoint, MSI 00
Capabilities: [b4] Vendor Specific Information: Len=14 <?>
Capabilities: [100] Virtual Channel
Capabilities: [128] Power Budgeting <?>
Capabilities: [600] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?>
Kernel modules: nouveau, nvidia
xrandr -q
[adramalech@tux log]$ xrandr
Screen 0: minimum 8 x 8, current 1366 x 768, maximum 32767 x 32767
LVDS1 connected primary 1366x768+0+0 (normal left inverted right x axis y axis) 256mm x 144mm
1366x768 60.05*+
1024x768 60.00
800x600 60.32 56.25
640x480 59.94
VGA1 disconnected (normal left inverted right x axis y axis)
VIRTUAL1 disconnected (normal left inverted right x axis y axis)
cat /proc/bus/input/devices
I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
N: Name="AT Translated Set 2 keyboard"
P: Phys=isa0060/serio0/input0
S: Sysfs=/devices/platform/i8042/serio0/input/input0
U: Uniq=
H: Handlers=sysrq kbd event0
B: PROP=0
B: EV=120013
B: KEY=402000000 380307af800d001 feffffdfffefffff fffffffffffffffe
B: MSC=10
B: LED=7
I: Bus=0019 Vendor=0000 Product=0005 Version=0000
N: Name="Lid Switch"
P: Phys=PNP0C0D/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
U: Uniq=
H: Handlers=event1
B: PROP=0
B: EV=21
B: SW=1
I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=LNXPWRBN/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
U: Uniq=
H: Handlers=kbd event2
B: PROP=0
B: EV=3
B: KEY=10000000000000 0
I: Bus=0010 Vendor=001f Product=0001 Version=0100
N: Name="PC Speaker"
P: Phys=isa0061/input0
S: Sysfs=/devices/platform/pcspkr/input/input4
U: Uniq=
H: Handlers=kbd event3
B: PROP=0
B: EV=40001
B: SND=6
I: Bus=0001 Vendor=10ec Product=0665 Version=0001
N: Name="HDA Digital PCBeep"
P: Phys=card0/codec#0/beep0
S: Sysfs=/devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input6
U: Uniq=
H: Handlers=kbd event4
B: PROP=0
B: EV=40001
B: SND=6
I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel PCH Mic"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1b.0/sound/card0/input7
U: Uniq=
H: Handlers=event5
B: PROP=0
B: EV=21
B: SW=10
I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel PCH Headphone"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1b.0/sound/card0/input8
U: Uniq=
H: Handlers=event6
B: PROP=0
B: EV=21
B: SW=4
I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel PCH Headphone"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1b.0/sound/card0/input9
U: Uniq=
H: Handlers=event7
B: PROP=0
B: EV=21
B: SW=4
I: Bus=0019 Vendor=0000 Product=0000 Version=0000
N: Name="Dell WMI hotkeys"
P: Phys=wmi/input0
S: Sysfs=/devices/virtual/input/input10
U: Uniq=
H: Handlers=kbd rfkill event8
B: PROP=0
B: EV=13
B: KEY=1500b00000000 200300000 0 0
B: MSC=10
I: Bus=0019 Vendor=0000 Product=0006 Version=0000
N: Name="Video Bus"
P: Phys=LNXVIDEO/video/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2f/LNXVIDEO:00/input/input11
U: Uniq=
H: Handlers=kbd event9
B: PROP=0
B: EV=3
B: KEY=3e000b00000000 0 0 0
I: Bus=0019 Vendor=0000 Product=0006 Version=0000
N: Name="Video Bus"
P: Phys=LNXVIDEO/video/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input12
U: Uniq=
H: Handlers=kbd event10
B: PROP=0
B: EV=3
B: KEY=3e000b00000000 0 0 0
I: Bus=0003 Vendor=0c45 Product=6430 Version=1208
N: Name="Laptop_Integrated_Webcam_2M"
P: Phys=usb-0000:00:1d.0-1.4/button
S: Sysfs=/devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input13
U: Uniq=
H: Handlers=kbd event11
B: PROP=0
B: EV=3
B: KEY=100000 0 0 0
I: Bus=0011 Vendor=0002 Product=0007 Version=01b1
N: Name="SynPS/2 Synaptics TouchPad"
P: Phys=isa0060/serio1/input0
S: Sysfs=/devices/platform/i8042/serio1/input/input5
U: Uniq=
H: Handlers=event12 mouse0
B: PROP=9
B: EV=b
B: KEY=6420 30000 0 0 0 0
B: ABS=260800011000003
glxinfo | grep OpenGL
OpenGL vendor string: Intel Open Source Technology Center
OpenGL renderer string: Mesa DRI Intel(R) Sandybridge Mobile
OpenGL core profile version string: 3.1 (Core Profile) Mesa 10.3.1
OpenGL core profile shading language version string: 1.40
OpenGL core profile context flags: (none)
OpenGL core profile extensions:
OpenGL version string: 3.0 Mesa 10.3.1
OpenGL shading language version string: 1.30
OpenGL context flags: (none)
OpenGL extensions:
OpenGL ES profile version string: OpenGL ES 3.0 Mesa 10.3.1
OpenGL ES profile shading language version string: OpenGL ES GLSL ES 3.0
OpenGL ES profile extensions:
sudo glxgears -info
Running synchronized to the vertical refresh. The framerate should be
approximately the same as the monitor refresh rate.
GL_RENDERER = Mesa DRI Intel(R) Sandybridge Mobile
GL_VERSION = 3.0 Mesa 10.3.1
GL_VENDOR = Intel Open Source Technology Center
GL_EXTENSIONS = GL_ARB_multisample GL_EXT_abgr GL_EXT_bgra GL_EXT_blend_color GL_EXT_blend_minmax GL_EXT_blend_subtract GL_EXT_copy_texture GL_EXT_polygon_offset GL_EXT_subtexture GL_EXT_texture_object GL_EXT_vertex_array GL_EXT_compiled_vertex_array GL_EXT_texture GL_EXT_texture3D GL_IBM_rasterpos_clip GL_ARB_point_parameters GL_EXT_draw_range_elements GL_EXT_packed_pixels GL_EXT_point_parameters GL_EXT_rescale_normal GL_EXT_separate_specular_color GL_EXT_texture_edge_clamp GL_SGIS_generate_mipmap GL_SGIS_texture_border_clamp GL_SGIS_texture_edge_clamp GL_SGIS_texture_lod GL_ARB_framebuffer_sRGB GL_ARB_multitexture GL_EXT_framebuffer_sRGB GL_IBM_multimode_draw_arrays GL_IBM_texture_mirrored_repeat GL_3DFX_texture_compression_FXT1 GL_ARB_texture_cube_map GL_ARB_texture_env_add GL_ARB_transpose_matrix GL_EXT_blend_func_separate GL_EXT_fog_coord GL_EXT_multi_draw_arrays GL_EXT_secondary_color GL_EXT_texture_env_add GL_EXT_texture_filter_anisotropic GL_EXT_texture_lod_bias GL_INGR_blend_func_separate GL_NV_blend_square GL_NV_light_max_exponent GL_NV_texgen_reflection GL_NV_texture_env_combine4 GL_S3_s3tc GL_SUN_multi_draw_arrays GL_ARB_texture_border_clamp GL_ARB_texture_compression GL_EXT_framebuffer_object GL_EXT_texture_compression_s3tc GL_EXT_texture_env_combine GL_EXT_texture_env_dot3 GL_MESA_window_pos GL_NV_packed_depth_stencil GL_NV_texture_rectangle GL_ARB_depth_texture GL_ARB_occlusion_query GL_ARB_shadow GL_ARB_texture_env_combine GL_ARB_texture_env_crossbar GL_ARB_texture_env_dot3 GL_ARB_texture_mirrored_repeat GL_ARB_window_pos GL_EXT_stencil_two_side GL_EXT_texture_cube_map GL_NV_depth_clamp GL_APPLE_packed_pixels GL_APPLE_vertex_array_object GL_ARB_draw_buffers GL_ARB_fragment_program GL_ARB_fragment_shader GL_ARB_shader_objects GL_ARB_vertex_program GL_ARB_vertex_shader GL_ATI_draw_buffers GL_ATI_texture_env_combine3 GL_ATI_texture_float GL_EXT_shadow_funcs GL_EXT_stencil_wrap GL_MESA_pack_invert GL_NV_primitive_restart GL_ARB_depth_clamp GL_ARB_fragment_program_shadow GL_ARB_half_float_pixel GL_ARB_occlusion_query2 GL_ARB_point_sprite GL_ARB_shading_language_100 GL_ARB_sync GL_ARB_texture_non_power_of_two GL_ARB_vertex_buffer_object GL_ATI_blend_equation_separate GL_EXT_blend_equation_separate GL_OES_read_format GL_ARB_color_buffer_float GL_ARB_pixel_buffer_object GL_ARB_texture_compression_rgtc GL_ARB_texture_float GL_ARB_texture_rectangle GL_EXT_packed_float GL_EXT_pixel_buffer_object GL_EXT_texture_compression_dxt1 GL_EXT_texture_compression_rgtc GL_EXT_texture_rectangle GL_EXT_texture_sRGB GL_EXT_texture_shared_exponent GL_ARB_framebuffer_object GL_EXT_framebuffer_blit GL_EXT_framebuffer_multisample GL_EXT_packed_depth_stencil GL_APPLE_object_purgeable GL_ARB_vertex_array_object GL_ATI_separate_stencil GL_EXT_draw_buffers2 GL_EXT_draw_instanced GL_EXT_gpu_program_parameters GL_EXT_texture_array GL_EXT_texture_integer GL_EXT_texture_sRGB_decode GL_EXT_timer_query GL_OES_EGL_image GL_AMD_performance_monitor GL_ARB_copy_buffer GL_ARB_depth_buffer_float GL_ARB_draw_instanced GL_ARB_half_float_vertex GL_ARB_instanced_arrays GL_ARB_map_buffer_range GL_ARB_texture_rg GL_ARB_texture_swizzle GL_ARB_vertex_array_bgra GL_EXT_texture_swizzle GL_EXT_vertex_array_bgra GL_NV_conditional_render GL_AMD_draw_buffers_blend GL_AMD_seamless_cubemap_per_texture GL_ARB_ES2_compatibility GL_ARB_blend_func_extended GL_ARB_debug_output GL_ARB_draw_buffers_blend GL_ARB_draw_elements_base_vertex GL_ARB_explicit_attrib_location GL_ARB_fragment_coord_conventions GL_ARB_provoking_vertex GL_ARB_sample_shading GL_ARB_sampler_objects GL_ARB_seamless_cube_map GL_ARB_shader_texture_lod GL_ARB_texture_cube_map_array GL_ARB_texture_gather GL_ARB_texture_multisample GL_ARB_texture_query_lod GL_ARB_texture_rgb10_a2ui GL_ARB_uniform_buffer_object GL_ARB_vertex_type_2_10_10_10_rev GL_EXT_provoking_vertex GL_EXT_texture_snorm GL_MESA_texture_signed_rgba GL_ARB_get_program_binary GL_ARB_robustness GL_ARB_separate_shader_objects GL_ARB_shader_bit_encoding GL_ARB_timer_query GL_ANGLE_texture_compression_dxt3 GL_ANGLE_texture_compression_dxt5 GL_ARB_compressed_texture_pixel_storage GL_ARB_internalformat_query GL_ARB_map_buffer_alignment GL_ARB_shading_language_420pack GL_ARB_shading_language_packing GL_ARB_texture_storage GL_EXT_framebuffer_multisample_blit_scaled GL_EXT_transform_feedback GL_AMD_shader_trinary_minmax GL_ARB_ES3_compatibility GL_ARB_clear_buffer_object GL_ARB_copy_image GL_ARB_explicit_uniform_location GL_ARB_invalidate_subdata GL_ARB_texture_query_levels GL_ARB_texture_storage_multisample GL_ARB_vertex_attrib_binding GL_KHR_debug GL_ARB_buffer_storage GL_ARB_clear_texture GL_ARB_multi_bind GL_ARB_seamless_cubemap_per_texture GL_ARB_texture_mirror_clamp_to_edge GL_ARB_vertex_type_10f_11f_11f_rev GL_EXT_shader_integer_mix GL_INTEL_performance_query GL_ARB_conditional_render_inverted
VisualID 32, 0x20

Hi
I assume you have installed the graphic card driver from the Intel website and you use NOT a Toshiba graphic driver which was designed especially for the notebook usage.
Well, Toshiba recommend using the Toshiba drivers. In this case you should try to use the recommended graphic driver which you can download from the Toshiba driver page.

Right, MacBook Pro 17" early 2011(Built March) and my new OCZ sata III 6G not working, when is Apple going to admit there is a problem with the Intel's 6 Series Chipset. In System Information it says "Link Speed: 6 Gigabit" which is sata III.

My MacBook Pro 17" early 2011(built March) and my new OCZ sata III 6G are not working together, when is Apple going to admit there is a problem with the Intel's 6 Series Chipset. In System Information it says "Link Speed: 6 Gigabit" which is sata III and in my MacBook Pro it does not work.
Now MacBook Pro 17" early 2011 built May onward do not have this problem it was fixed in the Intel's 6 Series Chipset. (So there is a problem). Cam I have my MacBook Pro fixed please.

After biting the bullet and ordering more RAM, my computer now is working a ton better. So that must have been the main issue. With 8 GB RAM, I can now even run Parallels fluidly (better than my work PC!) where before simple things like logging in to my MBP after reboot could take forever.
The place I went to had several other people getting RAM upgrades at the same time as me, so between this and other comments I've seen in discussions here and elsewhere on the Internets, I take it to mean that either Apple should bump up the base RAM on its new machines, and/or stop charging so much for additional RAM.
I refused to believe a Pro machine bought with Lion installed would come with too little RAM for light to medium usage, but it was apparently the case. I'll mark this as a correct answer and hope some other poor soul will come across this thread and be helped by it.

No sound with HDA Intel HDMI

I've got no sound with the Intel HDMI (work only with headphone)
Here are some hardware informations :
I've run the alsa-info.sh and my informations are there --> http://www.alsa-project.org/db/?f=82540 … 847ccaaccc
[root@archeee ~]# aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC662 rev1 Analog [ALC662 rev1 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 1: ALC662 rev1 Digital [ALC662 rev1 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: HDMI [HDA ATI HDMI], device 3: ATI HDMI [ATI HDMI]
Subdevices: 1/1
Subdevice #0: subdevice #0
[root@archeee ~]# lsmod | grep snd
snd_seq_dummy 1099 0
snd_hda_codec_atihdmi 2051 1
snd_seq_oss 25304 0
snd_seq_midi_event 4452 1 snd_seq_oss
snd_hda_codec_realtek 179443 1
snd_seq 42628 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device 4313 3 snd_seq_dummy,snd_seq_oss,snd_seq
snd_pcm_oss 33693 0
snd_mixer_oss 14810 1 snd_pcm_oss
snd_hda_intel 18921 0
snd_hda_codec 56728 3 snd_hda_codec_atihdmi,snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 5102 1 snd_hda_codec
snd_pcm 57479 3 snd_pcm_oss,snd_hda_intel,snd_hda_codec
snd_timer 16117 2 snd_seq,snd_pcm
snd 43847 11 snd_seq_oss,snd_hda_codec_realtek,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
soundcore 5007 1 snd
snd_page_alloc 5809 2 snd_hda_intel,snd_pcm
DAEMONS Section in rc.conf :
DAEMONS=(syslog-ng network netfs crond hal alsa)
The PC is an eeebox EB1006
http://www.productwiki.com/asus-eeebox-pc-eb1006/
Things I checked :
done a alsamixer and seleted HDA ATI HDMI, enabled sound with the m key
┌───────────────────────────── AlsaMixer v1.0.22 ────────
│ Card: HDA ATI HDMI F1: Help
│ Chip: ATI R6xx HDMI F2: System information
│ View: F3:[Playback] F4: Capture F5: All F6: Select sound card
│ Item: S/PDIF Esc: Exit
│
│
│
│
│
│
│
│ ┌──┐
│ │OO│
│ └──┘
│ < S/PDIF >
│
I've readed a lot of thread with the ATI HDMI sound probleme, and my config seems good, but still there is no sound.
Last edited by drev (2010-02-26 17:17:10)

I seem to be having the same problem playing HDMI audio. Do you happen to remember how you got this resolved?
For any interested parties, my alsa mixer screen looks something like this as well:
──────────────────────────── AlsaMixer v1.0.24.2 ─────────────────────────────
Card: HD-Audio Generic F1: Help
Chip: ATI R6xx HDMI F2: System information
View: F3:[Playback] F4: Capture F5: All F6: Select sound card
Item: S/PDIF Esc: Exit
┌──┐
│OO│
└──┘
< S/PDIF >
Audio works fine through the Realtek chip (HDA ATI SB card). Just not through HDMI.

ALSA: Recording Playback Audio with HDA-Intel

Hello,
My alsa-info. I only use analog output.
Alsamixer looks like this: http://ompldr.org/vYmE4Mw http://ompldr.org/vYmE4NA
I would like to record audio which is being played back on my computer. I need it for recording of gameplay videos. I want to use only ALSA for this and want to avoid PulseAudio, if possible.
Recording audio playing on the computer with Alsamixer tells me that I should use the "Mix" control of the Capture device. However, HDA-Intel appears not to provide such a control.
Does anyone know how I can create such control? Or perhaps I can somehow fake a capture device, that in fact simply plays back the hw:0,0 playback device?
Perhaps the snd-aloop module is a solution.
I will now start reading about .asoundrc files but wanted to leave this question here, because I feel that I'm likely to fail in my search for knowledge.
Cheers

I can't see a straightforward way to configure icecast to do this on the Arch Wiki.
I tried alsaloop, but it blocks devices when in use. Maybe I'm doing it wrong.
alsaloop -C hw:0,0 -P hw:0,0 -t 10000
I'm not the first to have this problem (thread of 2010-05-22)
I managed to get play-to-file working but ffmpeg doesn't seem to be able to handle the raw output and I'd have to make "default" play to file, as most games don't allow to set what alsa device to use for sound.

Safari load image problem with iMac Intel core

I got my new iMac 20" Intel core and system updated everything. I found that Safari cannot load image in my web photo album ( http://fotop.net/nicknick ), all image became "?".
I can load this page correctly with FireFox and Opera Browser. I also try the iMac 17" PowerPC in my office with the latest version Safari, it also load the album correctly. And I know this web is created and store in a Linux server, the web page coding not written or optimized to IE.
I've try to reinstall the whole OS X, nothing else installed, the same problem occurred.
Is it the problem on Intel core? or any setting I can do to overcome it?
Hope the problem could be solve, I like to use Safari except this problem.
iMac 20" Intel core Mac OS X (10.4.5)

Well... no - except to ask if your intel imac is connected to the internet in exactly the same way as the ppc imac. If it is, then that's puzzling
You're right, I'm puzzled by the imac.
Intel imac is at my home, ppc imac is at my office;
both using same ISP but different service plan,
(home:) PPPoE, ADSL modem -> buffalo MIMO wireless router -> intel imac (both direct wire or wireless connect have same result)
(office:) fixed-ip, ADSL modem -> firewall -> Linksys wireless router -> ppc imac (wireless)
both network setting with manual assigned IP, gateway and same DNS
Same result occurred when (1)open box new machine, (2)after updated system, (3)reinstall whole OS with preserve the old setting, (4)reinstall whole OS with erase the whole harddisk option, (5)updated system after the reinstallation.
I firstly think may be some security setting in imac that blocked the images, but can't found out. I secondly think some html code at this web not work on Safari.
May someone with same machine help to open this web to see if all intel imac get the same result?

Problem with T500 Intel Wifi Link 5300 adapter connectivity

I upgraded my T500 to Windows 7 Professional from Vista Business. Since upgrading, I have been unable to obtain satisfactory WiFi connectivity. Symptoms are that I cannot stream from either the internet or my local server without experiencing periodic interruptions and/or total drops. I've tried reinstalling the driver, replacing the WiFi card itself, and adjusting the parameters associated with the adapter card. Nothing seems to help. I also own a T61 laptop which I also upgraded from Vista Business to Windows 7 Professional, and I have had no problems with WiFi connectivity on that machine. It also has an Intel Wifi adapter but a different model. Both laptops connect to my LAN and the internet through the same D-Link wireless access router.
I'm beginning to suspect that the Windows 7 driver for this particular WiFi adapter is flawed. Has anyone in this forum had a similar experience?
Thanks in advance for your comments/assistance.

(speaking french)
try to use your laptop without 'energy star'. setup full speed processor to maximum.
I thinks the problem turn around win7 and 'energy saving driver'
regards

[SOLVED] ALSA no sound interrnal speaker with HDA Intel PCH

Hi, i have no sound from the internal speaker of my laptop but the headphones work.
configuration : http://www.alsa-project.org/db/?f=68a08 … 6d1a1242ae
i have tried to install the driver from realtek and to add the option "model=auto", "model=generic", "model=3stack" to the snd-hda-intel" module without success.
the command "aplay -vv -D hw:0,0 /usr/share/sounds/alsa/test.wav" plays a sound only through the headphones.
have you any idea to help me ?
thanks
Last edited by walkyrie (2012-06-02 13:22:49)

This seems pretty similar to my issue... No sound from my from headphone output at all... I do get sound from the rear output BUT it stops when I plug in the front one!
Ran the monitor option on the python script and see the following...
PLUG HEADPHONES IN:
======================================
Diff for codec 0/2 (0x11060441):
+++
@@ -220,17 +220,16 @@
Control: name="Line-Out Jack", index=0, device=0
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x0001001c: OUT HP EAPD Detect
EAPD 0x2: EAPD
Pin Default 0x01014010: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = Green
DefAssociation = 0x1, Sequence = 0x0
- Pin-ctls: 0x40: OUT
Unsolicited: tag=0x02, enabled=1
Power: setting=D0, actual=D0
Connection: 1
0x18
Node 0x25 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x0000001c: OUT HP Detect
======================================
PULL HEADPHONES OUT:
======================================
Diff for codec 0/2 (0x11060441):
+++
@@ -220,16 +220,17 @@
Control: name="Line-Out Jack", index=0, device=0
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x0001001c: OUT HP EAPD Detect
EAPD 0x2: EAPD
Pin Default 0x01014010: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = Green
DefAssociation = 0x1, Sequence = 0x0
+ Pin-ctls: 0x40: OUT
Unsolicited: tag=0x02, enabled=1
Power: setting=D0, actual=D0
Connection: 1
0x18
Node 0x25 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x0000001c: OUT HP Detect
======================================
Not a lot of difference, but enough to see that the system sees the event...
Now I need to know what to do to make sure the sound starts on the front headphone output when the rear one is disconnected, or if they are parallel, not have the sound stop ;-)

Z77A-GD65 Problems with Ethernet (Intel 82579V) Code 10 and 55 error

it is just a day with disaster. I bought Z77A-GD65 yesterday, and now it almost driver me crazy , i have two most famous problem of the board ,the CODE10 and ERROR 55!!!
after i bought this board to home ,i spend few hour to figure out the reason why the system can not be booted.
the DIMM SLOT 3&4 of my board is malfunction,no matter what combination i use (1&3,2&3, 3&4...etc),but it works for 1 and 2(i have 4 ram sticks,all of them is fine)
i do upgrade to BIOS 10.5(thx god ,i have two computer ,otherwise i cant even do it because of following issue)
after i solve the problem by only plug in 2 ram (DIMM1&2), succeed to boot up, a new problem occurred to me ,the CODE10!
latest driver , clean system install ,cmos cleaned, does not help.
i have read this thread for code10
https://forum-en.msi.com/index.php?topic=158591.msg1167303#msg1167303
and for error55
https://forum-en.msi.com/index.php?topic=158224.0
it seems the best way to solve it is RMA.
I notice that there is an Authorized Motherboard Repair Center (East Coast):
361 Alden Road
Markham, Ontario, L3R 3L
i live in Toronto, can i just go there and give the board to them to fix it or i can only mail it?
If i need to mail it ,what should i do?

Code 10 means the device cannot start. You have the right driver for the Intel 82579V is shorted by either a motherboard screw or a raiser under it. The ethernet adapter has lights which light up id driver is installed (even though code 10 is in effect).
Solution: Remove 1 or 2 motherboard screws and turn the pc on. Repeat until you find out which screw caused the issue. For me it was the screw closest to the ethernet controller.
The wa i fixed it was I was used a plastic washer and I was still able to have the motherboard screw in and at the same time not get code 10 anymore and my Intel 82579V worked fine since.

Problem with SOLARIS INTEL SOFTWARE 2

I can't install software from the second CD of intel software. When I use WebStart, it says that
/usr/bin/bzcat is not present so pkgadd can't work and if I try to install with Admintool, it cannot find
/usr/bin/bzcat too.
Any suggestion ???

Just to let you know you are not allone: We have a similar problem here. I have no idea what they mean with the file: itmpt-x86-XXX-itu.dd
Its just not there. Did you solve the problem in the meanwhile?
Greetings Andreas

Printing problem with new Intel iMac and Indesign CS3

Hi there,
this might not be the right place to ask for, but has anybody here experienced printing problems in Indesign CS3 with Tiger?
I just installed the software and tried to print out of Indesign, but nothing. I can see on the panel that data is beeing received but no printing action. And this is just out of the new Indesing CS3.
Any suggestions?
Best
Rolf

Our office is printing fine from ID & PS CS3. This is from Intel & PPC Mac's running 10.4.9.
What is your printer and how is it configured for printing, ie USB or IP.
Also, have a look at the cups error log. You can find this via System Profiler > Software > Logs. This will show which process is failing for the spooled job. You can post it back here for more help.

Z77A-GD65 Problems with Ethernet (Intel 82579V) Code 10

Hi,
on a fresh install of Windows 7 64bit i cannot make the Ethernet port on the motherboard work. It installs fine, but when i check device manager i see this message:
This device cannot start. (Code 10)
I downloaded the latest driver, but still no change.
Looking in device manager, i noticed that the driver Windows had selected was Intel 82579LM, so i reinstalled the driver, and forced 82579V driver, but still no change. I assumed this must be a defect motherboard, so i rma'd it, and got a new one....with the same problem!!!
So any ideas with to do ?

Quote from: Warner on 11-May-12, 04:10:22
Hello kaizerman,
Are you in the US?
Can you send the motherboard to me directly for analysis?
If needed, I will replace the board for you through RMA service.
Please email me at [email protected] but be sure to put my name in the subject field and your board model so it will come to me correctly.
Sincerely,
Warner
Hi Warner
Thanks for the reply. Unfortunately i'm not not in the US, i'm in In South Africa. Ive tried pro17 with no success... currently its showing the 82579V driver. but no still has the cannot start error code 10. I cant understand why it was working for a few days. then suddenly stopped. i made no hardware or software changes.
regards
Utterly perturbed

X240 problem with Bluetooth (Intel 7260) on Windows 10

My problem:Bluetooth sets up and appears to work fine for a few minutes, then stops working. It doesn't work until either the system is restarted or the Bluetooth adapter is disabled and then re-enabled, but in any case stops working again after a short while).When it stops working, the Bluetooth device status in device manager shows as "Windows has stopped this device because it has reported problems. (Code 43)"This problem started after upgrading to Windows 10 Pro 64-bit this week from 8.1. I upgraded from 8.1, and then did a clean re-install. Never had issues in 8.1.I currently using a Logitech Bluetooth mouse.Tried so far and did not work:Updated drivers using the newest version of Lenovo System Update for Windows 10Installed the newest version of Intel PROSet Bluetooth drivers (released only two days ago on 7/29/15) for the AC7260Uninstalled Intel drivers and rolled back to default Windows driversTried Windows 10 troubleshooting to no avail.Thanks in advance for a solution.

I found this same problem on my brand-new, out of the box MacBook last Friday, and then the same solution you found. It's not ideal, since this also hoses the network settings, but it did get BT back working again.
However, today, almost a week later, the problem is back. I do sleep this little machine frequently, which may have something to do with the problem. I have seen other threads mention the same problem.
What unfortunately I have not seen yet from anybody is a more substantial fix to the problem. Then again, I haven't scoured this forum completely yet.
Thanks in advance for any more clues!
-Will
MacBook Mac OS X (10.4.9)
MacBook Mac OS X (10.4.9)

Any problem with imac intel-based -power supply?

I just took possesion of an IMAC intel-based with 10.8 os. It is good so far but I'm not sure if alot of on/off power button usage is recommended.Is it better to put it to sleep for 1 hourish, or keep popping the power button. Thanks for reading. Double Thanks for an answer.

Welcome to the Apple Support Communities
You should turn off the iMac only when you aren't going to use it for some days

Two problems with new Intel mini

Got me a new Intel Core solo mini a week ago - using it as a media center / fileserver. To that end I have disabled the screensaver (set to 'never') and all other energysavers (also set to 'never'). After some time, the screensaver does start however, which is really annoying as the remote doesn't work well when the screensaver is active. Any ideas why this might be, or more importantly, how I can make sure the screensaver doesn't kick in?
Another thing: OOTB the mini doensn't display the grey startup screen but only the text-mode Unix prompts. Same on shutdown. It works fine, no problems there, but still... I'd like the complete Apple experience. Is there a setting that can be changed to get the cuddly, not-so-frightening grey Apple screen instead of the intimidating Unix messages?
MacBook Pro / Mac Mini Mac OS X (10.4.7)

Hello,
For the screen-saver, go into your settings and make sure that "Hot Corners" are not enabled. And, double-check that the "Never" setting was retained for the screen-saver.
As for the text at startup and shut-down, that is "Verbose" mode.
Go in to Terminal (the command line) by going to:
Applications --> Utilities --> Terminal
at the command line, type in the following exactly as it appears:
sudo /usr/sbin/nvram boot-args=""
Then, close terminal, and restart.
Verbose mode is simply a mode that shows you everything that is happening as you start-up. This is useful for figuring out where a system is locking-up during startup, etc.
To see verbose mode, you can also hold down the Command (Apple Key) and the letter "V" while starting up.
Or, you could go into the Terminal again, and type in the following:
sudo /usr/sbin/nvram boot-args="-v"
hope this fixes it for you.
Let me know how it works out.
I hope this helps.
Let us know if you have other questions.
P.S., if you'd like, go ahead and click the "Helpful" or "Solved" buttons on any of the posts / replies above if you feel they were helpful or adequately answered your question.

Problem with hda-intel

Similar Messages

Maybe you are looking for