Problem with hidding Search fields used to pass IDs to the table

Hello,
I have a problem which may be trivial but I cannot find the solution for quite a long time.
Please help
I have created a standard Search Panel with CustomSimpleSearch
I have LOVs to search for manager and organizations. You simply choose the a manager of an organization from the list.
Then I would like to put the values back on the original form
in two fields (in case of manager)
Manager name - visible for users so they know what they selected
Manager ID - to use to search the records in the table I have
SO I have defined mappings and the values are passed and then
the records are found based on Manager ID. The only problem is
I don;t want the ID to be displayed on the screen. I would like to hide this
messageTextInput
but I cannot
I tried setting the following attributes:
Rendered = false -> searching does not work
Secret = true -> searching does not work
Length = 0 - > lenght does not change
How to hide this field so that the ID is passed to it transparently and then the value is used for searching ?
Thank You in advance for Your help
This forum is great
Michael

Use formValue bean instead of messageTextInput. It is used for the very same purpose which you are looking for.
--Shiv

Similar Messages

Problem with JMS migration when using Ctrl+C to stop the managed server in cluster

          Hi,
          I am having a clustered weblogic application running on Weblogic 7.0 SP5. My application
          uses JMS as a asynchrous communication. We have MDB which listens to these JMS
          messages.
          If something is being processed on Managed Server 1 and while the request is in
          process, i am stopping the the MAnaged SErver 1 using Ctrl+C.
          After this, i go to admin console and migrate teh JTA and JMS. After this, i am
          expecting other running Managed Server should restart the incomplete transaction.
          But this is not happening. The Managed Serve2 doesn't process the requst.
          But when i restart teh MAnaged SErver 1 again, it takes up the same request and
          processes it.
          Is this a known problem with Weblogic that it doesn't support Ctlr+C case?
          Please note that the same thing is working fine when i stop the server using Admin
          console(Normal shutdown OR forced shutdown).
          Any comments in this regards are apprecciated.
          Thanks,
          Naresh


          Hi,
          I am having a clustered weblogic application running on Weblogic 7.0 SP5. My application
          uses JMS as a asynchrous communication. We have MDB which listens to these JMS
          messages.
          If something is being processed on Managed Server 1 and while the request is in
          process, i am stopping the the MAnaged SErver 1 using Ctrl+C.
          After this, i go to admin console and migrate teh JTA and JMS. After this, i am
          expecting other running Managed Server should restart the incomplete transaction.
          But this is not happening. The Managed Serve2 doesn't process the requst.
          But when i restart teh MAnaged SErver 1 again, it takes up the same request and
          processes it.
          Is this a known problem with Weblogic that it doesn't support Ctlr+C case?
          Please note that the same thing is working fine when i stop the server using Admin
          console(Normal shutdown OR forced shutdown).
          Any comments in this regards are apprecciated.
          Thanks,
          Naresh

Problem with ALV search help Dictionary Search Help

Hello experts
I have a problem with ALV search help.
I use DDIC table ZXXX with text table ZXXX_T. I created DDIC search help form table ZXXX. In my WD application, in context on COMPONENTCONTROLLER i set on attribute: 'Input help mode' as 'Dictionary Search Help' and in 'Dictionary Search Help' I pass name of new created DDIC search help.
I create a input field from that atrribute and search help works fine (there was a value and description for value from text table). So I created ALV witch contains that attribute too.
Next I set column for this attribute in ALV as editable but on Serch help for this collumn I have only value. I DON'T HAVE TEXT DESCRIPTION FOR VALUE.
Please help me and tell me what I do wrong?
Miko

Hello,
Thank's for your help. I create DDic Search help for all fields from my ALV. Next I changed 'TYPE' for all ALV fields in COMPONENTCONTROLLER from ZXXX-Zfield to Zfield, and I changed 'Input help mode' from 'Automatic' to 'Dictionary Search Help'. Now I see Value and Description for value in Search Help in my ALV.
Regards
Miko

Problem with S001 - Key field Sequence in table

Hi,
We want to use the extractor 2LIS_01_S001 with Delta. But delta is not working with these extractor. When I checked LBW0, I am getting error "The LIS environment is setup incorrectly".
According to note 115192, the key fields in tables S001, S001BIW1 and S001BIW2 have to be in the same sequence.
But we are on 4.7 with following Support Packs:
SAP_APPL 470 0025 SAPKH47025 Logistics and Accounting
PI 2004_1_470 0007 SAPKIPZI57 R/3 Plug-In (PI) 2004.1 for
R/3 Enterpri
PI_BASIS 2004_1_620 0010 SAPKIPYI5A Basis Plug-In
(PI_BASIS) 2004_1_620
And according to this note, solution is delivered with this Support Packs.
Can you please tell me that if this note is mandatory for all the releases..?
Did any one encounter this issue before..?
Thanks & Regards,
Samay Mehta

I changed my entity: unchecked the X column to be primary key added RowID as a primary key. Now it works.
What's wrong with my CHAR(1) as a primary key ?
I also tried to add a Refresh button:
<af:commandButton text="Refresh" id="cb3"/>and in the table add a partialTarget to the button. Now when I add new row and press the Refresh button - then it works.
So it seems that the problem is when I add new row and enter data, the table is not refreshed and the row is missing it's primary key.
Any solutions?
Edited by: a.gruev on Nov 26, 2009 4:18 PM

Cannot generate a reports region with a search field in an existing app.

I have not found a way of generating a reports region with a search field on an existing page in an existing application.
Can anyone help?
n.b. I am using htmldb with Oracle XE

If it's DPS no. There is no native search available.
You'd have to do the entire thing in HTML.
Bob

Problems with collective search help

Hello SDNers,
I was working with collective search help.
Ex : zc_srch1 (Collective)
In the 'Include search help' i have included 2 search elementary search
help
Ex : zsrc1 and zsrc2 (both elementary)
I have also assigned the parameter assignment for each included search help.
I have also mentioned the search help parameter under definition tab
Ex field form zsrch1 and field1 from zsrch2
and also checked the import and export checkboxes.
Now i have used the search help in the abap program
ex: tmp type field1 matchcode object zc_srch1.
Now when i execute the program the collective search help is getting populated. when i try to choose a value it is not getting selected to the parameter box.
Regards,
Ranjith N

Hi,
Once again check back your seach help creation by following the link below.
http://help.sap.com/saphelp_erp2005/helpdata/en/cf/21ee86446011d189700000e8322d00/content.htm
Cheers!!
VEnk@

Problem with Bridge search

Am I doing something wrong?
I title my folders with model names.
I put names, first, last, nothing works, no folders come up with Bridge search. help. thanks!

no folders come up with Bridge search.
Using both the search field top right in Bridge window and the Find Command under edit does give me the folder I searched for, so it should work.

Problem with formatted search on UDO Form

Hi,
I've created an UDO and in the lines I have the fields ItemCode and ItemName. In the ItemName field I have a formatted search configured the next way:
       -Search by Saved Query
           -QueryName
       -Auto refresh when existing altered column
           -ItemCode
       -Refresh regularly
This formatted search works fine when I do <shift> + F2 in the field. But when I change the field ItemCode and get out of the field it doesn't execute the formatted search.
Any ideas?
Thanks in advance, regards
Vanesa

Hi Vanessa,
Firstly (and I'm not giving lessons on sucking eggs) does this work when run as a query with the $ field replaced with a litteral value that you know exists in the table you're searching (surrounded by single quotes)?
The reason I say this is that I have had a few where as opposed to giving an error I've been hitting shift+f2 with absolutely NO feedback via error messages.
Which form is this within? How have you used the variable element in the query?
Is it possible for you to show the query? Along with details on which form you're using it in?
Hopefully be able to help with more info,
Julian

Proxy problem with Yahoo search returned links

We have two BM servers here. Older one Netware 6 sp5 w/ BM 3.7 sp3 that works well. A replacement that I have had up but not currently using much Netware 6.5 SP8 w/ BM 3.8 sp5. The latter one has a problem with Yahoo search results. If I point a workstation to the older NW6 BM it works fine in Bing, Google & Yahoo. If I point it to the NW6.5 BM then it will work fine in Bing and Google but in Yahoo it will return the results but when you click on any link there I get this message:
Yahoo!
Yahoo! - Help
The requested URL was not found on this server.
Please check the URL for proper spelling and capitalization. If you're having trouble locating a destination on Yahoo!, try visiting the Yahoo! home page or look through a list of Yahoo!'s online services. Also, you may find what you're looking for if you try searching below.
Any ideas? I have no access rules enforced. Anything that might be of help would be greatly appreciated.....Thank you!

On 03/10/2014 09:56 PM, jpeteet wrote:
>
> Mysterious;2310138 Wrote:
>> On 03/07/2014 09:06 PM, jpeteet wrote:
>>>
>>> We have two BM servers here. Older one Netware 6 sp5 w/ BM 3.7 sp3
>> that
>>> works well. A replacement that I have had up but not currently using
>>> much Netware 6.5 SP8 w/ BM 3.8 sp5. The latter one has a problem with
>>> Yahoo search results. If I point a workstation to the older NW6 BM it
>>> works fine in Bing, Google & Yahoo. If I point it to the NW6.5 BM
>> then
>>> it will work fine in Bing and Google but in Yahoo it will return the
>>> results but when you click on any link there I get this message:
>>>
>>>
>>> Yahoo!
>>> Yahoo! - Help
>>>
>>>
>>> The requested URL was not found on this server.
>>>
>>> Please check the URL for proper spelling and capitalization. If
>> you're
>>> having trouble locating a destination on Yahoo!, try visiting the
>> Yahoo!
>>> home page or look through a list of Yahoo!'s online services. Also,
>> you
>>> may find what you're looking for if you try searching below.
>>>
>>>
>>> Any ideas? I have no access rules enforced. Anything that might be of
>>> help would be greatly appreciated.....Thank you!
>>>
>>>
>>
>> 1. Verify that you use the same proxy.cfg on both servers and the same
>> settings like persistent connections.
>> 2. Take a lan trace on the 3.7 when hitting the yahoo url and a lan
>> trace on the 3.8 doing the same action and compare the differences.
>
> I am still trying to make sense of the Wireshark output. I can see where
> I get the HTTP/1.0 403 Forbidden. What is happening upon further
> inspection is when I click on a link returned from a yahoo search it
> actually takes me to a link that always starts
> "http://r.search.yahoo.com/.......blah blah blah. But If I go to the
> newly opened tab (in IE) and add 's' to the HTTP address and hit enter
> - the link works. Maybe that will help. This happens whether or not I
> have "enforce access rules" checked.....
>
>
1. Verify that you use the same proxy.cfg on both servers and the same
settings like persistent connections.
2. Compare both traces, the working one and the non working one. See if
the returned link from yahoo is the same on both traces and it is coming
from the same server. You may have another firewall/router up in the
path causing the issue.
3. Before taking the lan traces on the netware server using pktscan.nlm,
unload proxy, load proxy -cc to clear cache. Then take the traces and
see at what point the non working one differs from the working one.
check that info is coming from the same up server

TS3899 With Yahoo Mail, and anotare account (Inacap Mail), I can only receive mails but I can't send emails. I don't know if this is a problem of the iPad or it is a problem with yahoo mail, because using Gmail and the email of my job I don' have this pro

With Yahoo Mail, and anotare account (Inacap Mail), I can only receive mails but I can't send emails. I don't know if this is a problem of the iPad or it is a problem with yahoo mail, because using Gmail and the email of my job I don' have this problem.

Google them to confirm the settings that you need for the outgoing server, then check the setting you entered on the pad. Pay real close attention to the outgoing server name, and port. You may need to change in on the pad.

Problems with a shared calendar using Outlook 2007 and Exchange 2010

Hello all,
We are having a problem with sharing a calendar using Outlook 2007 and Exchange 2010.
I will start with some background. I have just started my position with this company. I have been working with networks for awhile at the small business level. I have not had much production experience with exchange. There is only myself and my supervisor
who has inherited a midsized network which was built by five previous techs that are no longer with the company. Of course, the previous techs did not leave much documentation, so the original hows and whys for our system setup has been lost.
One of the managers has a calendar she shares with some of our users. I believe this calendar has been in use since sometime in 2006. A mailbox was created to hold this calendar to keep it separate from the managers calendar. I am not sure what version
of exchange they were using at that time, but I assume there was one or two migrations of it getting to its current state on our exchange 2010 server. At some point it was observed that the other workers she was sharing with were not able to access it correctly.
I am not fully sure what the original problem was (possibly some people not being able to see or connect to the calendar), but it was decided to give everyone who needed access to this calendar full access permissions through exchange. Correct me if I
am wrong, but I believe that gave everyone connected the ability to do anything with the calendar. Of course the manager was not happy about that. This is where I started working on the problem.
I removed everyone, except the manager who wants to control the calendar, from having "Full Access Permissions". This did have the effect of making some people just able to see the calendar and not make changes. Though there were others that were
able to connect to the calendar who I thought would not be able to. The manager that originally created the calendar did try to manage access to it through the Outlook interface, though it currently does not seem to be fully in effect.
So, to get to the point of what we are trying to do, is there a way to get the original manager back into control of the calendar though Outlook? It would be preferred to be able to keep the history of what they tracked of this calendar, so starting a new
one would be something we would rather avoid. After that, getting all of the users that need to connect to the calendar reconnected with the correct access permissions and making sure they are all synchronized.
I realize this is a big mess, and your help would be greatly appreciated.

Hi Nigel,
How is the impact, just one user or all users, Outlook or OWA?
If just one user, it seems like an issue on the Outlook Client side.
Please trying to re-create new profile to fresh the caches.
Please runing Outlook under safe mode to avoid some AVs, add-ins and firewall.
Found a similar thread for your reference:
Calendar Sharing not available error message
http://social.technet.microsoft.com/Forums/exchange/en-US/d9b33281-d7bb-4608-8025-16fb26643d0d/calendar-sharing-not-available-error-message?forum=exchangesvrclientslegacy
Hope it is helpful
Thanks
Mavis
Mavis Huang
TechNet Community Support

Both xp and windows 7 have video problems with my VGA connection using TV

both xp and windows 7 have video problems with my VGA connection using TV as my monitor when it gets to starting up windows no matter what version it will not I have let my mac on all night and still says starting windows or the windows 7 logo and nothing else will happen also when I use a 3rd patty software like peraills or other it works like a charm how to fix it?

To map the drive on your computer click on Start - RUN - type "\\192.168.1.1" and click ok... When prompted for Username and Password type "admin" and click ok... Now you will be able to see the folder which you have shared on your router, right click on it and select "Map network drive" and click on finish.
Now it will map the drive on your computer and you should be able to transfer the file from your computer to the USB drive.

Is it possible to create a editable pdf with validation(required field) using Adobe Acrobat pro version?

Hi,
the subject says it all. I have downloaded the trail version to see if its possible to create a editable pdf with validation(required field) using Adobe Acrobat pro version?
Basically, I will have to create a pdf form where users fill it and send it back to me. there will be required fields (the textbox and check box) that user need to fill before saving the editable pdf?
Is it possible. if so, can someone kind enough to point to me right directions?
Thanks in advance.

Thanks for reply. What I am trying to achieve is to give an option for the user to download the pdf form and once the user tries to save the pdf, it validates with the required field. I managed to create the editable pdf with required fields option. I just need that validation to be done when user click on save file. How can I achieve this? thanks so much for your help.

Problems with a VBA Userform using Multipage (2) and DTPicker.

Hi
Problems with a VBA Userform using Multipage (2) and DTPicker (4)
On Page1 I've got 2 DTPicker, one for the date and the second for the time.
Same thing on Page 2.
Problem:
Only one set will work, if I close the Userform with" MultiPage"on page2, only that set will work.
Same thing if I close on Page 1 then just the set on Page 1 will work.
As anyone seen this problem and any work around you may think would help.
I'm using Windows 7 , Ms Office Pro. 2003
same problem on Windows Vista , XL2003
Cimjet

There are a number of issues relating to the way that date pickers are handled, but the most important is that their output is text. In order to get the values into Excel, you need to format the Excel columns as Date and Custom (time format) and convert
the output to the worksheet from text to date values.
Date pickers also display a few anomalies on multi-page forms, so you need a belt and braces approach. Personally I would put the code to call the form and enter the values in a standard module (as now in the example) and use a belt and braces approach to
maintaining the format.
I think you will find the example now works.
Revised Example
Graham Mayor - Word MVP
www.gmayor.com

Problem with Progress DB while using to connect using JDBC Adapter

Hi,
I am facing Problem with Progress DB while using to connect using JDBC Adapter. I am getting the following error in auditlog file like,
Error during database connection to the database URL jdbc:JdbcProgress:T:156.5.31.65:2545:/mfgprodev/devbadb
/devsche/i_apoext.db using the JDBC driver "com.progress.sql.jdbc.JdbcProgressDriver" : com.sap.aii.adapter.jdbc.sql.DriverManagerException: Unable to locate a suitable JDBC driver to establish a connection to URL " jdbc:JdbcProgress:T:156.5.31.65:2545:/mfgprodev/devbadb
/devsche/i_apoext.db "
I tried using the following all URLs,
1. jdbc:JdbcProgress:T:156.5.31.65:2545:i_apoext.
2. jdbc:JdbcProgress:T:156.5.31.65:2545:i_apoext.db
3.
jdbc:JdbcProgress:T:156.5.31.65:2545:/mfgprodev/devbadb
/devsche/i_apoext.
4.
jdbc:JdbcProgress:T:156.5.31.65:2545:/mfgprodev/devbadb
/devsche/i_apoext.db.
Can anyone please help me out in solving this issue.
May be the cause for this is :
1) The Wrong URL format
2) CLASSPATH is not setted properly..
Can you look more into this stuff.
Thanks,
Soorya.

Hi,
To access any database fromm XI, using the JDBC adapter, the corresponding drivers have to be installed on the XI server.
Just check this note 831162.
Also, check this PDF to install Drivers in XI,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3867a582-0401-0010-6cbf-9644e49f1a10

Problem with hidding Search fields used to pass IDs to the table

Similar Messages

Maybe you are looking for