Problem with I pod and new computer

When I connect my I pod classic to my new computer I get the message
Theres a problem with this drive - scan the drive now to fix it
What does this mean - I don't know what to do - HELP!!!!!

Sync using the manual method
Managing content manually on iPhone, iPad, and iPod

Similar Messages

No internet, "PPPoE Server Not Found" message. Same problem with both old and new modems.

Help please!
My internet connection with my old Westell 6100 modem was working fine, then quit all of the sudden and would not restart. The DSL and Data lights on the Westell modem were both green. The Internet light alternated between red and off.
I tried every troubleshooting thing I could think of:
Powering down and re-starting the modem and computer.
Resetting the modem.
Checking all of the wire and jack connections.
I plugged my computer ethernet cable straight into the modem, bypassing my router.
I tried both Windows and Mac computers.
I plugged the modem directly into the network interface on the outside of my house to bypass all of my house wiring.
I checked all my phone jacks with a telephone tester to make sure both phone lines were working and not reverse-wired.
I made sure I did not have a DSL filter installed on the modem line.
Verizon Tech Support did a line test and told me the line was fine but that there might be a problem with either my modem or something at the "central office" (not sure what that means). Verizon also sent me a new router as well -- a D-Link DSL-2750B.
The new D-Link router also does not connect to the internet (same problem). The DSL, Data, and Internet lights are all green on the D-Link. I have the computer directly connected to the modem with a new ethernet cable. I repeated the above troubleshooting steps. I went into the router configuration 192.168.1.1 and ran the modem's "Internet Troubleshooting" tests.
There were two error messages on the router configuration screens:
1."PPPoE Server not found" error message is shown on the summary screen.
2."No internet infrastructure present. Please call your infrastructure provider." is shown in the "internet troubleshooting" test results.
Verizon had me change some settings inside the router configuration -- no dice. Verizon ran another line test. A "Level 2 Tech" took over the call and told me that he thinks that the cause of the problem is that the outside wiring coming to my house is reverse-wired. How can this be true since my DSL worked for 2 years before this, my phone line tester indicates my phone lines are wired the right way, and my router reports "PPPoE Server Not Found?"
Verizon is sending out a repair tech to check the outside wiring but I don't think that is the problem at all.
HELP!
Solved!
Go to Solution.

If you're getting DSL sync (solid DSL light), this sounds like a case of a bad line card to me. I've seen it happen before where it wasn't an account or route issue to the network.
========
The first to bring me 1Gbps Fiber for $30/m wins!

Still having problems with loading cs6 onto new computer. adobe won't contact me?

I have posted this before and I did what was suggested, but have not had any luck with adobe support.
Problem: Mac laptop died. I have cs3 and upgrade to cs6 on the laptop, backed up to external hard drive. i'm trying to install now onto my new computer, but can't load it from the external hard drive, so downloaded cs6 upgrade from adobe from my products. i know i purchased and downloaded cs3 from adobe website, but it doesn't show up on my page. so when i download cs6 and it asks for my serial number, i put it in, but then it won't unlock the software because it's not detecting any other software (cs3) on my new computer. i was told that i had to contact adobe tech support, which i have done multiple times, but have not gotten any response back.
any suggestions?

Oh that's awesome!
Yeah, I have done similar things, that's why it came to mind lol
You're welcome, even though I wasn't a whole lot of help on this issue...
Have a great evening and feel free to return to the forums if you need any other assistance.
Benjamin

Problem with moving itunes to new computer

I recently bought a new computer and when i downloaded Itunes some of my songs did not come through complete. About 50 songs in my library will randomly stop playing in the middle of the song and move on to the next song. I downloaded the latest version of itunes. When I go to my library and play a defective song if i force it to fast forward it will play the remaining part of the song so the music is there. So far the only solution to my problems is an expensive one. only thing I can think of to do is delete the affected songs and pay to redownload them. Is there another way to resolve this issue? When I first noticed the problem itunes did let me redownload 3 songs for free then when I went to do it again ( because I have alot a music and haven't discovered ALL the defective songs yet. I cant find them till they play and I notice it) but when I went to redownload song I already paid for they wanted to charge me again.

Thanks for your advice.
Unfortunately it did not solve the problem.
I’m now convinced that my problem is related to the Intel Viiv Technology.
In an article at tweakdown.com, http://www.tweaktown.com/articles/937/index.html , they proclaim that if you have a computer with Intel Viiv Technology "you’re locked out of iTunes".

Problem With PSE-2 and New 1.5 TB Drive

Hi all. First of all, I've been using my registered PSE-2 for several years with no problem. AMD Athalon 7750 dual core at 2.7 Ghz, 2.0 G Memory. WD 1.5 TB primary and WD 500 GB secondary drive.Win XP SP3. I recently had a drive fail and installed a new freshly formatted WD 1.5 TB as my boot drive. Fresh install of WinXP and updates. Now when I install Elements, it appears to install fine. The problem comes when I attempt to start it the first time I get "Could not initialize Photoshop Elements because the scratch discs are full". Then Elements closes, thus not allowing me to do anything with the internal configuration of the program. I have tried unistalling and installing to the 500 GB drive, but still get the same error. I have increased my page file memory Does anyone know of a problem with installing Elements on a large drive or can anyone offer a possible solution to what I am seeing? Thanks in advance for suggestions...
JohnR.

I think Barbara meant photoshop 7, which was out a little before pse2.
If you hold down the Alt+Ctrl keys just after you start pse2, a dialog
should appear allowing you to choose the scratch disk (keep holding
the keys until the dialog appears)
If you have a recovery partition on your hard drive, try choosing this for
the scratch disk and then exit pse2. Then restart pse2 and from
Preferences>Plug-ins and Scratch Disks choose your regular hard drive for the scratch disk.
Newer versions of pse, at least newer than 3 or 4 don't seem to have this problem.
MTSTUNER

Migration Problems with Time Capsule and New MacBook Pro

Hopefully someone on here can help with with this problem I'm having. I just bought the new 13' MacBook Pro this week from the store and I no longer have my old MacBook Pro. I have a Time Capsule with complete backups of my old MacBook Pro and I also have the internal hard drive from it as well.
I had installed the beta version of Mountain Lion on the old MacBook Pro and the new one still has Lion.
The problem is that every time I have tried to use the Migration Assistant (and I've tried 3 times now) my files and applications are getting messed up.
iPhoto won't open. It says that it needs to be updated but when I check to update it it says that there is no update needed.
I'm seriously about to beat my head against the wall because every time I migrate the data it takes about 12 hours. I'm thinking at this point that it might be easier for me to just swap out the internal hard drives in the units because it is possibly an issue with the OS' and wait until next month to try migrating to the new drive again after Mountain Lion is officially launched.

Bob,
I appreciate your honest and prompt response. I was VERY SPECIFIC when I told the sales rep I was hoping to use the Time Capsule with two different MacBook Pro's on different subnets (one is behind a firewall on a router, one is directly connect to a WAN side IP with no firewall) and the sales rep made a point of saying that the dual band feature would facilitate this connectivity which left me with the impression (obviously wrong) that the WiFi features of the time capsule could be used to communicate with multiple Macs regardless of their own networking configurations. (I have been configuring fairly complicated networks for 20 years and only bought my first Mac two and a half years ago; the second Mac is only six months old; the third will be bought next month.)
This isn't the end of the world for me... it does require reconfiguring my network and doing a lot of port tunneling for the box outside of the firewall in order to bring it inside as well as giving up some remote access redundancies (which were based on the ability to connect to both machines using VNC software which is port specific which means that it needed separate WAN side IP addresses).
Overall I love the Mac approach compared to the nightmare that was (is) Windows (although I do also run an Ubuntu Linux box just to keep me honest). That said, your sales reps do your products a HUGE disservice when they give glib and incorrect answer to what was, I believe in my case, a very specific and precise question.
Bill Wood
Watertown, Mass.

HT1325 Problems with purchased songs and new computers

I have a new computer; my first mac. I am an apple convert, previously owning a toshiba. Some of the songs from an album I purchased through itunes will not play. What do I do? They have an ! with a circle around it next to them. I do not have a hardcopy or backup to revert back to. I just want to know how to be able to play these songs and listen to them as I have purchased the right to do so.

Depending upon what country that you are in (music can't be redownloaded in all countries) then you might be able to redownoad it via the Purchased link under Quicklinks on the right-hand side of the iTunes store homepage.
If it shows there but doesn't have the cloud symbol against it then try deleting it from the Music part of your library (where you are getting the exclamation mark) and it should then get the cloud symbol in Purchased for redownloading.
If music shows there but not that album then is it still in your country's store ? If it is then check to see if it's hidden : http://support.apple.com/kb/HT4919
If you aren't in a country where music can be redownloaded or if it'sno longer in your country's store then you won't be able to redownload it.
But you should be keeping and maintaining a backup copy of all of your downloads, an item can be removed from the store at any time - you are only guaranteed one download of each item.

Problems With Transferring To A New Computer...PLEASE READ

I recently had problems with my Powerbook G4 and called Apple about it. Long story short, I had to erase and install Mac OSX thus erasing everything from my hard drive. I have around 2,000 songs and 1,300 pictures on my iPod that I need on my computer. Is there any way of doing this?
powerbook g4 15 Mac OS X (10.4.1)

Sorry I can't help with photos however there are a number of third party utilities that you can use to retrieve song files from your iPod, this is just a selection. Have a look at the web pages and documentation for these, they are generally quite straightforward. I use Senuti but check the others out particularly if you need to move videos for which you' d need iPod Copy.
Senuti Mac Only
iPodRip Mac Only
PodWorks Mac Only
iPod.iTunes Mac Only
iPod Access Mac and Windows Versions
YamiPod Mac and Windows Versions
PodUtil Mac and Windows Versions
iPodCopy Mac and Windows Versions

Serious problem with base station and/or computer internet connection

Hi,
my powerbook does not detect my base station (another computer at home does, so the base station seems to be working) but it does detect other networks.
I have allready tried to reset the basse station (many times) but it doesen't help. Have tried to re-configure in Airport Admin Utility there is no base station (I cannot push configure) - when I push "Other" - it does not accept the base station password (have also tried "public" as they suggest in "help").
The same thing happens in Airport Setup Assistant: it does not detect my base station. It has happened before that the base station "disapears" and I could fix it now it seems to be unfixable. Can anyone out there help me???

Agnes,
the one computer connects wirelessly to the base
station and
works alright? Also the Mac can connect to the
base
station with ethernet and works alright?
Yes, thats correct
Then you should be able to access the base station two ways, from the Mac via ethernet or from the pc. I am assuming that your "pc at home" is a pc running windows (if the 2nd computer is also a Mac it would be even better).
Anyway, you can administer the base station from the dark side, you may want to check out the following:
AirPort 4.2 for Windows
http://www.apple.com/support/downloads/airport42forwindows.html
Check also:
XP users need to have WZC installed to administer:
http://docs.info.apple.com/article.html?artnum=108049
If you haven't upgraded your pc to XP Service Pack 2.
As far as running the admin utility from the Mac, connect to the base via ethernet. You have indicated that you can do that and get to the internet, therefore you should be able to see the base station with the admin utility. If you are seeing your neigbor's that is wirelessly. But the wired connection Mac->Ethernet->Base-LAN-Port should allow the base to show up with a Name and an IP Adress.
Once in the admin utility for the base station (either by pc wirelessly or by Mac via ethernet) you can then make changes. You should be able to see the Base Station Name and the Airport network name. You can then change the channel: 1, 4, 7, 11 (try three apart from each other). Is your base set up to configure TCP/IP using ethernet, configure using DHCP (select the Internet tab at the top to get to this page)? On the Network tab page, is the base configured to Distribute IP addresses, Sharing a single IP address using DHCP and NAT?
As far as your Mac's System Network Preferences, you are not selected to Connect using PPoE are you? Are you set to "Automatically join an open network"? Are you configured for Using DHCP? To join a specific network (your airport network name and password)?
By the way, if RF interference is a possible problem, you can check out:
AirPort: Potential sources of interference
http://docs.info.apple.com/article.html?artnum=58543
Gino
-

Why won't Apple fix the wifi connectivity problem with the iMac and new OS instead of just havin us go through hours of useless mock fixes!

I have spent hours with apple care about this problem with wifi connectivity. According to all the posts I'm not alone. I love my new IMAC
but i'll be glad to go back to my PC just so I can get my email without all the headaches. It seems that Apple has lost interest in
the IMAC and all of the problems associated with the new OS.

Keep in mind that ASC is where people go to get help, so yes, you are seeing reports of people who are having WiFi connection issues. But while it might seem like there are lots of people having trouble, given the sheer number of iMacs in use, it is a very small number. Also keep in mind that WiFi isn't totally under Apple's control. There are dozens of WiFi routers. Even worse, the manufacturers of WiFi routers often release firmware upgrades to fix flaws without ever informing the consumer. And just to add to the confusion, while WiFi 801.2 n routers have been sold for several years, for most of that time there was no agreed upon standard!
So if you'd like help, first, what router do you have and have you checked the vendor site to see that it has the latest firmware?

Problem with Ipod Touch and new software (2.2.1)

After upgrading to the 2.2.1 I have been unable to listen to it using my car stereo. It will only recognize my ipod sometimes and when it does a majority of the time there will be no sound at all. On my car stereo it shows my playlists and everything but no sound. I never once had a problem with my ipod or stereo until I did this upgrade. I tried switching out the usb cord but that did not help. I then restored my Ipod. I also tried to wipe out the battery completely and then charge (heard on a different message board that that could possibly help). Still having the problem though. I have an Ipod touch and a Pioneer stereo with the USB cable hook up.

yeah i'm having the same problem i have a pioneer navigation system and it will not play my ipod touch after upgrading to 2.2 i called apple to try to find a way to downgrade and they never gave me an answer

Problem with USB speakers and new Mac Mini

I have a USB sound system consisting of a pair of Harman Kardon soundsticks and a woofer from probably 10 years ago (bought and used originally with a Mac). I have tried driving it my new Mac Mini. It works fine for about a minute; then the music stops. Here's what I've tried to diagnose the problem:
1. The problem does not occur when these speakers are driven from my Macbook Air (about 3 years old).
2. The OS and iTunes software is up to date on both machines (10.9.5 and 12.0.1.26).
3. It does not depend on which USB port I use on the Mac Mini.
4. Using a port on a USB extender on the Mac Mini does not solve the problem.
5. The iTunes Preference settings are the same on both machines.

Sorry, no actual experience with USB Audio devices.
I found this in the Pro forum, but the outlook doesn't seem good:
http://discussions.apple.com/thread.jspa?messageID=1739084&#1739084

Problem with MAC Pinning and new VLAN

[Cross posting to Nexus 1000V and UCS forums]
Hi all, I have a working setup of UCS 1.4 (3i) and Nexus 1000V 1.4 and as per the best practice guide am using 'channel-group auto mode on mac-pinning' on the Nexus uplinks. I am having trouble when adding a new VLAN into this environment, and it is a reproducable problem across two different installations.
I go through the usual VLAN creating process on the Nexus, the upstream network and within UCS itself. I create the new vethernet port profile and set it as an access port in the new VLAN. However when I attach a VM (either existing or new) to this new vethernet port profile within vCentre the VM cannot communicate with anything. However, if I disable MAC pinning with 'no channel-group auto mode on mac-pinning', the VM instantly starts to talk to the outside world and the new VLAN is up and running. I can then turn MAC pinning back on again and everything continues to work.
So the question is, is this behaviour normal or is there a problem? Disabling MAC pinning does have a brief interruption to the uplink so is not a viable long-term solution for the customer when they want to add new VLANs. Is there a way to add new VLANs in this scenario without any network downtime, however brief?
Thanks

Simon,
Let's gather some further outputs if you're able to recreate this (if this is prod, let me know and I'll whip this up in my lab).
Go through the process of setting up the new VLAN. Once you confirmed your VM has no connectivity when using a PP tied to the new VLAN, gather the following outputs into a text file and attach to this thread:
From the VSM:
show vlan
show int trunk
show log last 15
module vem x execute vemcmd show vlan y (x = module of VEM where VM is running, y is the VLAN ID)
module vem x execute vemcmd show bd y (y = VLAN ID)
module vem x execute vemcmd show pc
module vem x execute vemcmd show port
module vem x execute vemcmd show pinning
module vem x execute vemcmd show trunk
From the CLI of UCS Interconnect:
connect NXOS
show vlan
show int trunk
Also please highlight or Identify:
- Problem VLAN ID #
- VM veth # in question (1000v)
- vEth # for each Service Profile vNIC used for your VEM uplinks (UCS)
We'll start with this and work from here. Once I have these outputs I'll let you know if I need anything else.
Regards,
Robert
(I'll keep this as the main thread, and update the 1000v forum once we resolve)

HT4847 problem with i pod and mac

hi i have got a little problem ; i d like to add some music on my ipod from my mac , but there're already some music on my ipod and i dont want to delete them i just would like to add other music on my i pod without delete all my music from my ipod ? thanks for helping

Sync using the manual method
Managing content manually on iPhone, iPad, and iPod

CP5: Problems with Execute Javascript and New/Current window setting

Hello everyone,
I am at my wits' end trying to set this up properly, and I was hoping for some help.
I have inserted a series of buttons designed to open other captivate-created HTM files. I wanted the files to be opened in a controlled window, so I used Execute_Javascript function on the buttons. Here is the code I am using:
void window.open('filename.htm','name','height=680,width=906,left=0,top=0');
I enter that code in the script window. I also want to set it to open in a new window (not reuse the current window), so I used the arrow to the right of the Script_Window button and set it to "New."
When I publish and put it all up on a SharePoint server, it works fine. But then I had to correct a typo on one of my slides (unrelated to this functionality), so I corrected it and republished. The buttons which were working moments before now no longer function. It seems that the "New" setting I had set in the drop-down had reverted to "Current" without me touching it. The Javascript also stopped working. Clicking the button sometimes launches the file in the current window, sometimes in a new window, and sometimes the launch itself fails.
Captivate just seems to forget the New/Current setting all by itself. And for some reason, the actual launching of the file via Javascript also just stops working.
As a test to fix the non-functioning Javascript, I deleted the word "void" then saved the CPTX. Then I added the word "void" back in, saved it again, and published, and now it works. I can't make heads or tails of this, and it is very frustrating, especially since it will delay the delivery of my files.The javascript reads the exact same and yet sometimes it works and sometimes it doesn't.
Has anybody seen this before? How on earth do I fix it?
Thanks!

Hi Jim,
Thanks for the feedback. It's good to know that the New/Current issue is a bug and it's not just me.
I tried your suggestion, and I am still having the same problem. I also tried switching to Open File or URL and entering this:
javascript:void window.open('filename.htm','name','height=680,width=906,left=0,top=0' );
Same problem. Sometimes it works and sometimes it doesn't. Code is exactly the same. I can literally put the code in and publish, it works fine, then I can go back into the project, change something completely unrelated (i.e., not touch the javascript), publish again, and now it doesn't work.
Thanks for any additional feedback.

Problem with I pod and new computer

Similar Messages

Maybe you are looking for