Problem with iADcore.dll not found

If anyone can help me with this issue I would really appreiciate it. I can not get itunes to load, and it is therefore usless. I miss all my music, and I have not been able to get Apple to help me with the problem. Very frustrating.

See Troubleshooting issues with iTunes for Windows updates.
Try the repair tip in the third box first.
tt2

Similar Messages

  • Problems with MSVCR80.dll not found, cannot install itunes

    tt2,  I'm using your instructions given earlier about removing 5 apps and downloading iTunes.  I got lost at 're-installing' using run as administrator or administrator rights.  How do I do that?  I assume its ok to see the error message that the system can't find AppleApp Support.  Can you help me?

    Follow the instructions of tt2 in https://discussions.apple.com/thread/5822086

  • RS480M2-IL - problems with "PS2 Mouse not found"

    Hello!
    I bought RS480M2-IL motherboard. The first strange thing was the post about "not know processor", but i have fixed by upgrading it to the 1.4 version. You should to know also that I have USB mouse. When I am starting my computer I can see the post which says: "PS2 Mouse not found". It is a very big problem for me, because I wanted to run a Jabber server on it. After restart it won't get up. Is there any clue or something which will fix it? Don't tell me, that I must wait for new BIOS version. 
    Thanks for help  :azn:
    Regards.
    kapsel03

    RS480M-IL = s754
    RS480M2-IL = s939
    I assume you have the s754 version because s939 bioses start with 3.x.
    I have the same problem using bios 1.4.
    This is a bios issue that hopefully will be fixed in the next bios version.
    I found a temporary workaround though. Go into the bios --> Standard CMOS Features --> Halt On --> [No Errors].

  • Problem with kfmclient (command not found)

    Today, I tried to run the CUPS web configuration tool, but it failed to run (ie. open the page in Firefox).  I executed the command in the terminal to check for errors, and it said "kfmclient: command not found".
    When I checked pacman for kfmclient, no such package exists.  How do I install kfmclient?

    Just an additional information,
    for 'command not found' problems, pkgtools in community should be helpful. It also have a bash hook to find the package automatically on that error.
    Thanks, regards,

  • Problems with Safari - server not found  - for no reason!

    Just in the last week when I go to a webpage (and it can be any random page and its intermittent) it will come up blank saying "Safari cannot open the page because the server cannot be found" HOWEVER there is nothing wrong with my internet connection or with the website I am trying to navigate to.
    Example, I wanted to go to mailcall couriers. I click on the link on my favourites bar, I get the above error message. I got to google and try access it, same thing. I go to google and click on a sub page link (like contact us) and it is fine and I can then navigate to their working home page from there.
    Safari seems to do this routinely with some pages but not all, and not always the same ones. Sometimes the pages will open sometimes I will get this error - but if I try opening that same page at teh same time on my ipad its fine! So it is not the website or the internet.
    I have tried resetting safari, clearing cache etc... to no avail.
    NOW, on a similar note, I have numerous open pages in safari on my iphone 5S - as of today - all thos pages are coming up witht eh same above error message and wont open
    Safari 7.0.1
    Any help is much appreciated as this is driving me insane.

    What would cause this is just what I mentioned above.
    You MUST be using a valid Domain Name Server to look up your symbolic addresses into IP addresses so that sites can be contacted. It is easy to get a bad DNS Server, and the information sometimes comes from bad info entered into your Router. Bad DNS references can also be caused by certain malware.
    You must use one of:
    • The EXACT numbers provided by your ISP.
    • The numbers provided by a Public DNS server such as (in the USA) Google DNS  or Open DNS

  • Avfoundationcf.dll "Not Found" [FIX]

    I discovered how to fix the problem of  "avfoundationcf.dll Not Found" in windows xp 32 bit
    You just need to Uninstall and Re-Install the 'AppleApplicationSupport"
    Just go to this directory "C:\Documents and Settings\All Users\Application Data\Apple\Installer Cache\" and chose the directory "AppleApplicationSupport" with the higher version, my directory is "AppleApplicationSupport 2.1.6" Inside of this directory just run "AppleApplicationSupport.msi" and chose "Remove" when it finish run this file again and chose "Install"
    It worked for me
    Hope it help :]

    This procedure might work or might not work:
    Download the free Ccleaner and repair your Registry (repeat until clear)
    http://www.piriform.com/ccleaner/download/standard
    Uninstall iTunes according to Apple's directions here
    http://support.apple.com/kb/HT1925
    Use Ccleaner and repair your Registry again just in case.
    Then download/install iTunes again from the Apple website
    http://www.apple.com/itunes/
    Your iTunes content will not be removed,
    Please regularly backup your iTunes content to external medium (hard drive, cd/dvd's) using the File>Backup Library in iTunes. Apple will not reissue new copies of content.
    (Notice: this post is a copy/paste in a hope that a uninstall/reinstall and repair of your Registry may solve your particular issue, Windows issues are particular difficult to resolve due to multiple factors, so my advice is to be taken into advisement with others recommendations which may be more specific or experienced in resolving your issue. If it or others recommendations solve your issue, please respond back with a "Correct" or "Helpful" or not resolved responses so we can further refine our efforts in trying to successfully assist others. I receive no compensation for product mention.)

  • Error on boot: "STOP c0000135 unable to locate component csrsrv.dll not found reinstalling the application may fix the problem"

    I am running Windows Server 2003 R2 (I know it's old, I'm in the process of upgrading it now to 2012) on an old HP ProLiant server. It's worked for ages, but yesterday morning it booted up with the blue screen of death, saying:
    STOP c0000135 unable to locate component csrsrv.dll not found. Reinstalling the application may fix the problem.
    I have tried coping the file from C:\WINDOWS\ServicePackFiles\i386\csrsrv.dll to C:\WINDOWS\system32\ using a WS2003R2 recovery disk, but it still doesn't work. I'm not sure what to do now...
    I do have backups, but I'd prefer just to get this server back up and running so that I can continue to migration so that I can decommission it permanently and put it out to pasture...
    Any help and guidance is greatly appreciated.
    Thanks in advance!

    If copying the DLL does not help then I would recommend doing a system state restore from a backup.
    This posting is provided AS IS with no warranties or guarantees , and confers no rights.
    Ahmed MALEK
    My Website Link
    My Linkedin Profile
    My MVP Profile

  • I am now getting an error message from Elementsautoanalyzer.exe, extendscript.dll not found. reinstalling the application may fix this problem.  is there a fix for this?

    I am now getting an error message from Elementsautoanalyzer.exe, extendscript.dll not found. reinstalling the application may fix this problem.  is there a fix for this?

    TomCT60,
    Is your MacBook using Mac OS X 10.6.8 as indicated in your post? If so you will not be able to fully integrate with iCloud.
    iCloud and Snow Leopard, by Roger Wilmut describes what iCloud options are available for Snow Leopard.
    If you are using Lion, go to iCal>Preferences...>Accounts, and delete/re-add your iCloud CalDAV server.

  • I have an HP Pavilion zv6000 laptop with which I have used iTunes for years. I downloaded iTunes version 11.1.4.62 and rcvd error msgs (Apple Mobile Device failed to start. Verify sufficient privileges to start system svc. Then a MSVCR80.dll not found.???

    I have an HP Pavilion zv6000 laptop with which I have used iTunes for years. I downloaded iTunes version 11.1.4.62 and rcvd error msgs (Apple Mobile Device failed to start. Verify sufficient privileges to start system svc. Then a MSVCR80.dll not found.???

    Hello Don,
    Thank you for the details of the issue you are experiencing with iTunes.  I suggest removing iTunes and all related components and reinstalling iTunes for the issue you described.  The following article has steps to do this(it is important to remove all components in the order listed):
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/HT1923
    I recommend continuing with these articles if you continue to experience issues with iTunes:
    How to restart the Apple Mobile Device Service (AMDS) on Windows
    http://support.apple.com/kb/TS1567
    Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • HT201253 Sync problems x2 - duplicates and SyncUICoreLocalized.dll not found

    I have sync 2 issues:
    On my work computer, I typically only sync Outlook contacts with my iPod Touch.
    1 - I get an error but it seems to sync anyway... Resource not found   SyncUICoreLocalized.dll not found
    2 - iTunes does a less-than-stellar job of dealing with duplicates when syncing contacts with Outlook. I'll get some conflicts but have to search and clear out many more, despite using 'overwrite'.
    WinTel machine, Win7
    iTunes v11.x so far
    iPod Touch 64gb 5gen

    Bump!
    Now, after following usual App support procedures, I've all my OLD notes but none of the NEW ones.
    PLUS - Notes isn't uploading to my Mac.

  • Installing update resulted in error message MS VCR80.dll not found, Apple mobile device failed to start

    Can you help with error message on installing itunes on Windows XP: error message MSVCR80.dll not found.  Apple Mobile Device failed to start.  Error 7 Windows error 126.
    Deleting itunes and reinstalling does not fix it.

    Solving the iTunes Installation Problems in Windows
    1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
    2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80.

  • After new itunes upgrade getting Windows error 126 that identifies MSVCR80.dll not found.  itunes unable to open. Anyone have cause and resolution.

    After installing new itunes upgrade on Windows Vista PC, itunes does not open. Getting error boxes identfiying Windows error 126 (error 7) plus; MSVCR80.dll not found.
    Anyone have casue and resolution?
    Apple support did not have file or process available to backoff to previous itunes version v11.1.3 to allow recovery so itunes could continue use with no problems as before this new upgrade.

    Solving MSVCR80 issue and Windows iTunes install issues.
    Thanks to user turingtest2 for this solution.
    Solving MSVCR80 issue and Windows iTunes install issues.
    If the above doesn’t do the trick entirely, then use the instructions in the following as it applies to the version of Windows you are using:
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    You may be required to boot into safe mode to complete the folder deletion process.

  • Tecra M9 - TPSMain.exe cannot start because CpePerf.dll not found

    Hi and help,
    have searched the web and found other forum threads with similar issues.
    Tried all the suggestions to no avail. I am not great on the computer but can find my way around. Anyway....
    After login messge following messages pop up in succession, along the lines of : TPSMain.exe cannot start because CpePerf.dll not found then: TPSoddctl.exe cannot start because CpuPerf.dll not found
    Computer works fine but Power Saver does not auto start and neither can i select it to from control panel.."toshiba power saver is not running",
    so select it from Power options..."failed to start as CpuPerf.dll is not running"
    Did all the searching on net and followed all advice... i.e. unistall power saver in safe mode, unistall toshiba common utilities neither can unistall fatal error 0x7e
    So download Ccleaner, run checks, unistall with Ccleaner same fatal error.
    Been on Toshiba support and tried to install Power Saver......same problem won't install .
    So help help help if possible.
    Computer is working fine but messages popping up are annoying and i would love power saver to prolong battery.
    Tried system restore, though i doubt this affects the files...another problem "system restore could not complete"...tried this several times and cannot system restore either....what is going on???????
    any help please
    Tim

    Cheers for the advice Andrei,
    so you suggest there is nothing i can do other than restore from Toshiba recovery disc. Do you think somebody with a bit more knowledge could do sort it out with a less drastic approach..i.e is it worth taking it into a shop? Or do you think they will just have to go down the same route?
    If i follow your plan is it just a simple case of downloading all my docs, photos, bookmarks to an external hd and then inserting the recovery disc and following intructions.?? I guess this disc then formats the HD and then reinstalls all the components the laptop came with??? is it infact a drastic approach, or quite simple as a procedure...what do i stand to looose?
    Also how do i save xp as this is a version i installed when working/ using my laptop for my previous employer and i no longer have access to the discs/product key.
    also could you confirm if this procedure would sort out system restore. I have tried restoring again to several restore points and the procedure will not complete, so this function is definitely not working anymore.
    Sorry for more questions but as you can see this is not familair territory for me!!
    many many thanks
    Tim

  • Dgz.dll not found worked fine till today. Loaded 4.11 bata and still same error

    Question should read VGJ.dll not found. Then said reloading the program may correct.
    I downloade the bata verion of 4.11 and still get the same error with both 3.6 and 4.11?

    Hi schützenkönig:
    Many thanks for posting!  As you can see, I made my initial post over a week ago, and since there were no responses, I thought perhaps I was the only one this was happening to!
    In any event, disabling Protected Mode is the only way I've found to prevent the crashes from happening.
    I posted about this on the mozillazine forum -- http://forums.mozillazine.org/viewtopic.php?f=38&t=2551745&sid=7e877237158ffdc560789fb668c 858c0 -- but didn't get very far.  Apparently, Firefox is blaming Adobe and has no plans to do anything about it.  I was given some reassurance, however, by the comment that adblock plus offers protection from harmful flash content.
    By the way, I made a follow on post when I downloaded the latest version of Flash Player -- 11.4.402.278  -- http://forums.adobe.com/message/4708561#4708561
    Unfortunately, it did nothing to fix the problem.
    Ortho_Fan

  • Mxsxport.dll not found

    Hi,
    when starting a TestStand Operator Interface or the Sequence Editor I sometimes have the following problem: mxsxport.dll not found!
    This seems to be a dll belonging to MAX. I've already added the directory of this dll to the search directories but the failure still happens sometimes.
    Any suggestions?
    Thanks
    Steffen
    P.S: I'm using Win2000 on one machine and Win XP on another, both have the problem. TS 3.1, MAX 3.1.1, NI-DAQ 7.4

    Hi Scott,
    regarding your questions I can tell you the following:
    1) I'm using a OI that was modified out of a simple OI shipped with TS. The development environment is CVI 7.1.
    2) I attached the error message. Unfortunately it's in German because of German Win2K. But it says that the dll was not found in the listed directories.
    3) The OI starts the sequence correctly but stops/hangs when it reaches the first step that uses DAQmx. The DAQmx functions are implemented in a CVI dll (dioclass.dll). I think that the error occurs when the TS Engine tries to load all necessary code modules because the error message pops up after the login screen of the TS Engine. I attach the section of the log window of dependency walker.
    4) see #1 and #3 - there are no MAX or DAQ calls in the OI directly. Only my dioclass.dll which is called by TS steps uses DAQ.
    I haven't tried to add MAX directory to PATH variable yet but I will do so soon. But I'm not sure if I can make a statement about it because the error is not really repeatable.
    Regards
    Steffen
    Attachments:
    mxsxportdll.zip ‏27 KB

Maybe you are looking for