Problem with IDoc filtering in the distribution model

Hello Experts,
We are using a distribution model in which we have set filters as like the following
Filter Group 1
Plant : XYZ
Sales Org: SAP1
As far as the documentation says this Condition should work with AND logic between Plant and Sales Org
(i.e ~ Plant XYZ and SO SAP1 ) but the IDoc gets created even if any one of the condition is met(looks like working in OR logic).
How to achieve the AND filtering between the different objects.
Would appreciate your kind help.
Thanks in advance.
RGds,
Vasanth.

> Jakub ~ Yes I checked the generated IDocs(classified pertaining to my Model)for my model alone and that's where we are facing this problem
So that's the filtering problem.
I would check in which segments are the "filtering objects" located (BD59) and whether it is a mandatory segment. If it is a mandatory segment - IDoc should not be created. If it is an optional segment - this segment and its subsegmets will be filtered out - but IDoc will be created.
> ~ Do we need to apply some SAP Notes to avoid this problem ?
> But why the filter should behave in OR fashion ? I do not understand.
I believe that Sachin meant that the logic is:
Filter Group1 OR Filter Group 2 OR ... Filter Group N
Filter Group 1 Object 1 AND Filter Group 1 Object 1 ... AND Filter Group 1 Object M
Filter Group 1 Object 1 Value 1 OR Filter Group 1 Object 1 Value 2 OR ... Filter Group 1 Object 1 Value L
regards,
Jakub

Similar Messages

How to transport the distribution model from devlopment to quality in idocs

Hi ,
I am developing settings for idocs for the basic idoc type 'MATMAS03'.
By using SM59 , I gave the connections of two logical systems.
I created the distribution model by using BD64. when I generate the partner profiles , automatically, port and partner profiles are created.
How to transport from DEV to QUALITY of RFC connections, Distribution model and automatically generate partner profils and port ?
Plz give me the answer in broad way
Regards
NTR

hi,
Refer to this link...
how to transport distribution model

Problems with ALE filters...

Hi I have a situation I need to send materials to a partner only the materials specific for a particular plant.The filter in the distribution model is based on E1MARCM-WERKS.
change pointers are enabled.When material is changed may be some other fields which are not relevant to plant data the idoc is created with message function '018'(resend) and the E1MARCM segment itself is missing.So the filters are not verified and the materials which belong to other plants are also sent to the partner...
How can this problem be rectified...?
Thanks for your help
Larry

Hi Aber,
I have an wague idea, can't we put a condition like if WERKS is not initial or if WERKS = 'your filter value'. If any of these case is correct, it will stop sending the idocs.
shylesh

Problem with IDoc scenario - IDocs do not aarive to XI

Hi guys!
I have a problem with IDoc->XI->File scenario. Colleagues send IDocs from R/3 and they are not in the XI. In R/3 they look like if they were correctly sent, however, I can not see them in sxmb monitor. BUT, when they send them again explicitly from R/3 (t-code WE19), they arrive...
REALLY strange...
Any suggestions?
IDX2 metadata loaded.. I think, all needed settings are done.
Question - do I need to set up LS in XI ABAP part?
Thanx, Olian!
P.

Hi Olian ,
just check if u have followed all the following steps
SAP XI
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (IDX1)
a) Select create new button
b) Enter the port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Load Meta Data for IDOC (IDX2) a) Create new
b) IDOC Message Type
c) Enter port created in IDX1.
SAP R/3
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (We21)
a) First Select Transactional RFC and then click create button
b) Enter the destination port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Create Partner Profile (WE20)
a) Create New
b) Create the Partner no. name as same the logical system name of the destination system.
c) Select Partner type LS
d) Enter details for Type: US/USER, Agent, and Lang.
e) Click on the + button to select the message type.
f) Select Partner no. and LS which ever create above.
g) Select Message type
h) Select Process code related to the Message type.
I) save.
In SLD System Landscape Directory
TS for R/3 (Logical system):-Assign the client name created in R/3 as Logical system Name.
Ts for Third Party (Logical system):-
BS for SAP R/3 (Logical system):- Assign the client name created in R/3 as Logical system Name.
BS for Third Party (Logical system):-Enter the XI logical system name.
In Transaction SALE
Define and Assign the logical system name
Regards,
AshwinM

Problem with idoc DEBMAS

Hi everybody.
We have a problem with idoc DEBMAS.
This idoc is sent from R3 to PI throw change pointers then the idoc is field only with the data modified in the master custumer.
We need the information fill it in the segment /IDOC/E1KNA1M/E1KNVVM to determine the receiver determination but this segment is not always sent.
What can be done in R3 to send always this segment.
We dont want to sent the whole data but always this segment.
Any idea???
Thanks a lot!!!!!

Hi,
As E1KNVVM segement is not mandatory, when you are triggering IDoc based on change poitner data might not populted in the E1KNVVM segment until some sales data is changed.
if you need that segement always just copy the Idoc type and make it mandaotry field.
otherwise yoy can populate some fields like STDVRS with the reruried constant and can use in your receiver determination.
Regards,
Suresh

A problem with PoE devices in the Topology view (LMS 3.1)

Hello,
the customer has a problem with PoE devices in the Topology View. :-( He doesn't see the 2960 PoE devices with the PoE filter enabled in the topology view:-( He uses LMS 3.1 on Windows.
In the NetPro discussion I found that the list of PoE devices is in the following file:
POECapableDeviceTypes.properties
but I cann't to find thid file in the campus directory. In the campus folder are following folders: bin, etc, lib and www.
Thank you
Roman

The file is in NMSROOT/campus/www/classpath/com/cisco/nm/ani/clients/campus/main/filters/POECapableDeviceTypes.properties.

Problems with drill filters

Post Author: srinath
CA Forum: Publishing
In BO XI, I am facing problems with drill filters. I have a report with eight tabs and each tab has data corresponding to a particular value in the drill filter. A particular value is selected from the drill filter and the corresponding data is displayed in each tab. I need to select a value from the drill filter and display the corresponding data in the tab; while doing so when i save the report and open it again, the data corresponding to the particular filter value is not present instead it displays all the data. The only other way i could solve this problem was by creating a report level filter in each tab but this doesnt seem to work in other reports. What is the proper way of using the drill filter in this case?

How did you configure the filter?

TS3694 good evening i have an problem with my iphone 4 the wif and network cant on now if i tray is showing iTunes i tray to reload the ios is showing an error -1 can you help me

good evening i have an problem with my iphone 4 the wif and network cant on now if i tray is showing iTunes i tray to reload the ios is showing an error -1 can you help me

No problem, glad to help!
Update: my PC USB hub was connected to a USB 3 port, I connected the 30 pin cable directly to my PC, And the restore worked just fine. Restored phone from iCloud backup and seems to be working fine.

TS5376 I'm having a problem with downloading and installing the new version of itunes for windows (11.1.4) I have done everything the troubleshooting article has said and it is still not working properly.

'm having a problem with downloading and installing the new version of itunes for windows (11.1.4) I have done everything the troubleshooting article has said and it is still not working properly. I have even done a repair to see if that works and it has not. Has anyone else found a new way to get it working?

Try Troubleshooting issues with iTunes for Windows updates.
tt2

HT1222 I am trying to update my phone so I can save my info on my old phone & get a new phone, but I get a error that says "There was a problem with downloading teh software, the network connection timed out.." HELP! Not sure what my settings shoud be..

I am trying to update my phone so I can save my info on my old phone & get a new phone, but I get a error that says "There was a problem with downloading teh software, the network connection timed out.." HELP! Not sure what my settings shoud be...
I never updated anything until now...I want o update my iPhone to the newest version, but i do not want ot loose all that I have on this phone. I was told I needed to update the operating systems so i can put things into the cloud for transport to new phone, but I am just not sure how to do this..Can you help out here??

Dear Jody..jone5
Good for you that can't update your iphone because I did it and my iphone dosen't work for example I can't download any app like Wecaht or Twitter..
Goodluck
Atousa

Hello , please am having a problem with my iphone 5 , the battery runs out quickly , also if i turn on 3G it will run faster , 15 minutes and the iphone battery will be out , and my final problem is that is "no service " appears a lot can you help ?

Hello , please am having a problem with my iphone 5 , the battery runs out quickly ,another problem also if i turn on 3G it will run faster , 15 minutes and the iphone battery will be out . My final problem is that "no service " appears a lot especially when opening wifi or 3G , can you help ?

Your battery is running quickly because your cellular data connection is weak.
Is your phone carrier a supported carrier: Wireless carrier support and features for iPhone in the United States and Canada - Apple Support
For your no service issues: If you see No Service in the status bar of your iPhone or iPad - Apple Support

HT1665 i have an apple IPhone4. I am experiencing certain problem with my iphone4. The problems are as follows a. my ear piece and proximity sensor is not working while making a call. 2. It cannot reproduce sound without earphone but rings if gets any cal

Hi folks,
i have an apple IPhone4. I am experiencing certain problem with my iphone4. The problems are as follows a. my ear piece and proximity sensor is not working while making a call. 2. It cannot reproduce sound without earphone but rings normally if gets any call.
Can any one help me in this regard??

Try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose data by resetting, but it can cure some glitches after installing new software or apps.

MacBook Pro 15 with Windows 8.1 installed via Boot Camp problem with keys "@" and " " of the keyboard

Hello,
I have a MacBook Pro Retina Maverick in 2013 on which I installed Windows via Boot Camp 8.1.
The installation went well but when I am running Windows 8.1, I have a problem with "@" and "<" keys on the keyboard.
When I type the "@" key, I get "<"
When I type the "<" button, I get "@"
I have reinstall Boot Camp from Windows 8.1 for reinstall the drivers and see if it would solve the problem but it was not the case.
Someone of you has he encountered the same problem?
Thank you.

The language of my Keyboard is French

Problem with iWeb 09, after the publication in a local file.

*Subject: problem with iWeb 09, after the publication in a local file, i can't see my blog, nor my photos, but before that all was working fine.*
After the publication in the local file, I see all my pages, but there is a mistake on the page "Blog" where I just can see the top of my page, it's cut and I can't see it entirely, so I can't see the inputs while I should see 3 news or 3 inputs. And it's the same for the "Photos" page where the page is cut, I can't see the photos, and it's just written : "Put the slide show and subscribe".To finish, when I want to activate the comments, it doesn't work neither.
Please help me.

I want to activate the comments, it doesn't work neither.
The comments feature is only available when you publish to the MobileMe server, so I don't think you can use it when you publish to a local file.

I've had a Samsung network extender for over a year and it's been great. About a week ago, my iPhone 5 stopped connecting to it. I've never had problems with this. All the lights on the extender are blue, so it seems it's working fine. Any suggestions

I've had a Samsung network extender for over a year and it's been great. About a week ago, my iPhone 5 stopped connecting to it. I've never had problems with this. All the lights on the extender are blue, so it seems it's working fine. Any suggestions?

Oh no! Lets ensure that you are connected. Have you tried to reset the Network Extender? Are other devices able to connect to the Extender? Is your Internet service up and running?
Share details so that we can help!
Thank you,
LenaA_VZW
Follow us on Twitter @VZWSupport

Problem with IDoc filtering in the distribution model

Similar Messages

Maybe you are looking for