Problem with Indian Languges

hello every body
Iam mohan.Iam a developing a tool using which databse application can be developed in any Indian languages.
all the GUI and resource bundles part is over.
the problem is with the orcale databse.Iam using orcale 9i.when I store Hindi data in oracle Database, it is getting stored as ?????.
java String is utf-16 format and my oracle character set is utf-8 encoding.
Please help in this.as my project submission date is getting closer.

Bathina,
I don't have an answer for you, but I believe the "Database Globalization Support Guide" may help you. It is available from:
http://tahiti.oracle.com
Also, you may need to use the JAR files that support international character sets. Try the following Web page for more details:
http://www.oracle.com/technology/tech/java/sqlj_jdbc/index.html
Good Luck,
Avi.

Similar Messages

Problem with iTunes languge , how can i fix it ?

i want to use on my mac with my languge but i want that iTunes will be in english how can i do it ?
sorry about my english...

You have a 3G iPod and those can go as high as 5.1.1. What exactly happens when you connect the iPod to your computer and try to update via iTunes? You need iTunes 10,5 or higher on the computer.
After you get it updated see if syncs.

I am going to buy unlocked iphone 5.. i will be going to india nxt months and will stay there for a while... so my question is will i get warrenty in india.. and will there be any problem with using indian sims..?? thnx for the help..

i am going to buy unlocked iphone 5.. i will be going to india nxt months and will stay there for a while... so my question is will i get warrenty in india.. and will there be any problem with using indian sims..?? thnx for the help..

The warranty for the iPhone is not and has never been International.
Warranty and support are ONLY valid in the country of origin. The only exception is the EU where the entire EU is treated as one country.
If the device will be used in India, buy it in India.
An unlocked iPhone will work on any supported GSM carrier world wide. The LTE portion of a US purchased, unlocked iPhone is unlikely to work outside North America as it does not support the appropriate bands used in other countries.

Problems with PDF on Internet site for Indian visitors

Hello,
I'm administrator of a website with German und English contens (made with typo3). When I check my English sites online, everything is okay.
But a visitor from India told me, he is not able to open the linked PDF-files.
I checked the links and the PDF-files, but they are okay. It seems to be an "Indian problem".
The visitor get's the message "Internet Explorer can not display the webpage". May be a problem with the integrated Reader in the IE?
With best regards,
Lille.

What Reader version is that Indian visitor using?
Also, can you post a link so that someone can test it?

Problem with navigation and masthead by changing languages with Anonymous

Hi All,
i have a problem with navigation and masthead by changin the language when accessing as anonymous user.
Ive created two additional users anon_de (with language german )and anon_en (for english).
I've created also two links in the in masthead:
/irj/portal/anonymous?guest_user=anon_en and /irj/portal/anonymous?guest_user=anon_de
When i choose "de" for the first time it works fine, but when i choose "en" again the language in the content are is changing to english again, but not in navigation and masthead. When i click again on link for "en" the languge is set to english. Strange thing is that when i click on "de" instead the portal content change to german but masthead and navigation are in english now, as it should be before....
It seems that masthead and navigation have always prevoius language selected.
Do you know, what could be the reason of that strange behavior?
Thanks for help
Karol

Hi Detlev,
you are right. the user is not "updated" fast enough... the strange thing is, that it works by the first time i change the language...
well.. i can implement that workaround as you suposed, but it would be a really workaround as the same page will be requestes second time, causing requests number to be double..
Thanks for help
ps. i forgot to mark this message as question to give points.. if you tell me how i can change that ill reward your answer..

Airport problem with iMAC 27" and serious service support for indonesia

Hi all,
i can't seem to get any help from anywhere else. so i try to post it here.
i tried to call the apple store (indonesia) which i bought this imac 27" from. got transfered 4 times and i had to explain it to them all over. in the end i got to speak to the technician and i asked whether i can get a replacement and they don't think it's the correct solution and leave me hanging here.
the apple store is listed as an apple authorized service provider (AASP) or apple authorized distributor (AAD):
iBox by Padang Digital Indonesia - Apple Authorised Service Provider
Puri Imperium Office Plaza, (Belakang Menara Imperium)
Jl. Kuningan Madya Kav. 5-6, Jakarta
12980
Tel: 62 21 8370-iBox (4269); 830 6763
Fax: 62 21 830 6730
Email: [email protected]
Web: http://www.ibox.co.id
i called the apple support on the apple.com (0018 03061 2009 for indonesia) today wednesday 19 may 2010, time 1:12pm indonesia local time (GMT +7) i didn't get the guy's name but i can tell he's Indian from the accent, i told him what the problem is, he told me to wait, i waited for 10 minutes and he hung up on me at 1:24pm. please check on the record, because i was told the whole conversation was recorded.
so, let's go to the problem:
i can't share my internet with airport built-in in my imac 27".
I'm using ZTE usb hsdpa modem connected to the imac. (fyi, my friend is using the same exact modem and internet provider and don't have any problems with internet sharing using his macbook)
i tried to share the internet through the airport express simply with these steps:
1. open the system preferences, internet sharing,
2. connection with "ZTE usb modem", and the box next to "Airport" is ticked
3. turn on the internet sharing
4. press start
5. yes the firewall is off.
and these are what i'm having right now:
1. the airport symbol wont turn into an arrow
2. when i open the network preferences, it says: AirPort is turned on but is not connected to a network. (color is orange not green)
3. i searched the wireless network with my ipod touch and i found nothing
4. if i try to "create a network" here's what it says "There was an error creating your computer-to-computer network."
5. this are the details on the airport card:
Software Versions:
Menu Extra: 6.2 (620.24)
configd plug-in: 6.2 (620.15.1)
System Profiler: 6.0 (600.9)
Network Preference: 6.2 (620.24)
AirPort Utility: 5.5.1 (551.19)
IO80211 Family: 3.1 (310.6)
Interfaces:
en1:
Card Type: AirPort Extreme (0x168C, 0x8F)
Firmware Version: Atheros 9280: 2.1.9.5
Locale: RoW
Country Code:
Supported PHY Modes: 802.11 a/b/g/n
Supported Channels: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165
Wake On Wireless: Supported
Status: Not Associated
and yes, i've updated all the airport software and i stick on the 10.6.2 os.
It seems like people who has this latest imac 27" also having problems with the airport express. and they somehow got a replacement.
http://discussions.apple.com/thread.jspa?threadID=2261196&tstart=0&messageID=109 80828
so, i really really appreciate if i can get help here.
many thanks and best regards,
irene

If you have anything configured in System Preferences/Network/Airport then you have conflicts configured into the network. I suggest that you start from the beginning. Do not assume anything. Do not take any short cuts. Start fresh.
Go to Sys Prefs/Sharing turn off Internet Sharing. Go to Sys Prefs/Network, highlight AirPort and press the - symbol below to remove the AirPort interface. Now press the + symbol and create a new AirPort Interface. In the new AirPort interface do not turn on AirPort. You should only select the box to show AirPort Status in the menu bar. Now press Apply.
Go to Sys Prefs/Sharing and follow the steps 1 through 11 in my first post.
In step 11 Sys Prefs should ask you to turn on AirPort. Turn it on. It should next ask you to start Internet Sharing. Start Internet Sharing.
The AirPort Status in the menu bar should show AirPort is on and have an arrow pointing up. In the AirPort Status dropdown menu it should show AirPort is ON, Internet Sharing is ON and it should show the name of the Internet Sharing network that you created.

Problem with Photoshop CS 6 install

I have a CS6 academic license. I installed it on my laptop without difficulty. But when i installed it on the MacPro I got two error messages "Could not load actions because an unexpected end-of-file was encountered" and "could not initialize Photoshop because the preference file was invalid (it has been deleted). This sounds like a bad download but it has occurred on several different downloads.

I got a call today Akash of Adobe, in Indiana is suspect, calling about another problem with an Adobe product, Lightroom, that I was having. I'd solved that one myself so I presented my problem with PS6 installation. At this point I had uninstalled PS6 but had the application installation file was sitting on my desktop. So he had me reinstall just PS6 (all the other apps in the Wed Design Suite we already installed). After entering the suite license number, which Adobe accepted, we procedure with a standard installation procedure EXCEPT just prior to the actual installation he had me hold down Command Shift Option keys. This led to a question about deleting a file with a YES-NO option being presented. Akash had me delete it and the rest of the application was successful! I asked exactly what we had deleted and I think that he explained that it was a corrupted "Preference" file. What I realized afterwards was I was unclear if this corrupted file was from a previous attempt to install PS6 or was a corrupted file from an earlier edition of PS (my PS5 is working fine and I haven't opened PS4 in quite some time since PS5 was fine). So the problem is solved and I thank you for you efforts. Cheers Reed

Problem with Localization of Crystal Reports

Post Author: raj20007
CA Forum: Crystal Reports
Hi everyone..I am having a problem with crystal Reports. I need Malayalam unicode( INDIAN Language) to be displayed in the reports, this data will be binded from database.And the problem is : After applying this unicode font to the labels of my reports, some labels in the reports are going invisible.Also, previously if I increase the font size beyond 22, I used to get "A Generic error occured in GDI+". But after changing the textformat property of the field to "crRtfText" from "crstandardText" , I could resolve this Generic Error.
And, I could also observe that the last char of the fields in the "details" section is repeating.This is the code I am using to apply local font to the labels.
Private Sub assignfont()
Dim Mfont As New Font("kartika", 20, FontStyle.Regular,GraphicsUnit.Document)
CType(Report.Section8.ReportObjects("Field45"), CrystalDecisions.CrystalReports.Engine.FieldObject).ApplyFont(Mfont)
CType(Report.Section8.ReportObjects("Field48"), CrystalDecisions.CrystalReports.Engine.FieldObject).ApplyFont(Mfont)
End SubAnd I am calling this function in the form load event of that report.Any suggestion on this is greatly appreciated........Thanks in advance..

Thanks for replying.
Yes I am trying to move the 15mb of template files which are located in the Users Profile to a different location. I have modified the key in the Registry which defines this location: HKEY_CURRENT_USER\Software
Business Objects\Suite 12.0\Crystal Reports\ChartSupportPath=My Defined Location
I have done this prior to installtion and prepulated the registry and the templates in my defined location, but the installation over looks this and writes over the reg key. Even after modifying the reg key post installation, the application writes over this key and ignores what's in there. Does this mean that the Install.EXE is hard coded to always over write that location, and therefore the crw32.exe is hard coded to look in the User's Profile for the templates, and if they are not there it will create a copy for the User specific??
Thanks

Appalling customer service. Problem with Infinity ...

Placed order for upgrade from Bt Broadband to Infinity 1 on Tuesday 19th March. Was given installation date of Tuesday 26th March (Today). All started well when engineer arrived at 9am. He had already done the necessarys in the cabinet up the road so fitted the new master socket and connected the new modem to my existing BT Home Hub 3 (installed last march and been working OK ever since). Well all the lights on the modem came on OK but the hub would not connect to the internet, the 'B' was orange. Nothing he did would make it work. He went away after 2 hours, most of wich he had been on the phone to BT trying to sort out the problem to no avail. He came back a little later and sid that he needed to reconnect my old copper connection as another department needed to come out to sort it out. The impression I got was that they would be back later today or maybe tomorrow. How wrong could I be. Despite my landline being registered as my preferred contact number I later received a text message saying BT had tried to call me to tell me that my new installation date is Thursday 11th April!!!!! That's over 2 weeks away. I was fuming at this delay and not even being consulted as to whether this was convenient.
I phoned the 'helpline' number (laughably misnamed) and after going through the usual Indian call centre finally got through to a guy in UK who said that he could offer me a better date of next Tuesday, 2/4/13. Obviously I was still unhappy with this offer since as far as I was concerned they hadn't finished what they started today so my existing installation was still outstanding. Wrong again - BT has closed todays installation (how can they do that when they haven't finish????) and I have to wait for the next available date for a NEW installation.
Well, after a prolonged discussion and much banging of head against a brick wall I had no option but to accept the next tuesday date.
Why should I have to wait another week? I would expect them to prioritise my installation and sort out the problem ASAP not just push me to the back of the queue. I feel that now they have my money they don't care that I don't have what I ordered when I expected it and what can I do - NOTHING.
My thoughts are that there could be a problem with the fibre socket on my hub but as the engineer doesn't supply the hubs he couldn't try another to eliminate this. If I have to wait a week only to get someone turn up with a new hub, try it and it works, I will be absolutely livid. That could/should be done NOW.

Well thought I'd give you an update on my Infinity installation.
Quinn engineer arrived this morning about 10:30.
He had no knowledge of the previous aborted attempt to install Infinity last Tuesday. I had to fill him in on the story and the problems as I understood them.
He disappeared off to the cabinet to reconnect the fibre.
He returned. Connected everything up. Home Hub still showing orange light.
Looks like the fibre socket on your Home Hub may be faulty he says. Goes out to van, comes back with new Home Hub. Connects it and hey presto all is working wonderfully.
He left less than 30 mins after he arrived.
Of course I am delighted to finally be connected to Infinity but I am outraged that it was so simple to put right. I even suggested to the original engineer last week that it could be the hub faulty but he didn't carry a spare one to test it. He was going to try to get a spare hub but was told by someone at BT not to as it was unlikely to be the problem.
So I have had to wait a week for someone to fit a new hub when it could have easily been done last week.
My questions are:
1 - Why don't your engineers carry a spare home hub?
2 - Why was the original installation appointment closed when the job was not completed?
3 - Why did I have to have a new appointment (originally 16 days after original date), effectively putting my unfinished installation to the back of the queue when a 30 min visit the same day or the following day would have sorted it out?
4 - Why was the first engineer not allowed to get a replacement hub to see if that would help?
5 - Why when today's engineer arrived did he have no prior knowledge of the 'problem'?
6 - Why is the online order checker not updated? It has shown my 'new' appointment as Thursday 11th April right up to today. Wrong information is worse that no information.
I'm sure you can understand that I am far from impressed with the utter shambles that BT has created over this installation and think, at the very least, they should consider refunding my installation charge as a gesture of goodwill.
As I feel at the moment I am very unlikely to recommend any of my friends and family to commit themselves to a contract with BT.

Problems with a non-BT product or service

I have just contacted BT as my down IP Profile has become 30% less than it should be over an approximately 6 month period. This is despite the fact that my line is surprising stable with an average up time of around 14 days and the main disconnection being BT induced profile resets.
I have had this issue three times before. The solution is 1 to 3 Openreach Engineer visits that find no fault and end up with a line reset to up the profile.
This time the Indian call centre rang me, tested the line and found no fault (as expected). They said because of this they could not do anything and suggested I contacted second line support.
I then received the following email
"Problems with a non-BT product or service
Hi,
You recently contacted us regarding a non-BT product or service. We confirmed that your BT Broadband service and equipment were working ok but we were unable to help you with your product/service as it's non-BT.
We recommend that you check your user guide or contact your manufacturer regarding the product/service. Before you do that, check out these links below as they may help you further.
Happy to pay for technical support from BT?
BT has a team of technical experts. For a monthly fee they can help you with a range of problems. Go to www.bt.com/techexperts to find out more and sign up.
I am using a BT supplied OpenReach modem and HomeHub 4 A so other than devices connected to the HH4 all kit is BT supplied.
Can I have some (preferably Moderator) help on this please ?
Solved!
Go to Solution.

DavidM wrote:
Hi vofsanity2,
Thanks for posting. I can look into this for you. Drop me an email with the details. You'll find the "contact us" form in the about me section of my profile. Once I have the details we'll take it from there.
Cheers
David
I am pleased to say that thanks to moderator intervention I was contacted by Kevin who arranged for an OR Engineer visit.
As expected no fault was found and after a line reset to restore my profile to what it should be (actually slightly better) my 30% drop was corrected.
It is fairly clear that if you have FTTC and a connection to the cabinet of 1200-1400metres then the DLM is happy to reduce your line speed but reluctant (if at all) to increase it. This means your profile decreases over time and has to have a manual reset.
The worrying development this time is that now when the helpdesk tests your line and finds line speed and profile match they assume you have a problem with a non-BT product or service where as previously they accepted that a 30% drop in profile was a BT Fault.

Planning problems with russian language during refresh application

Hello all ))
I have problems with Planning during refresh my Application with Essbase.
I intsalled Essbase on RHEL4 and set ESSLANG=Russian_Russia.ISO-8859-5@Default also I set locale on ru_RU.iso88595
Ater that I installed Planning on Solaris 9 which uses Oracle RDBMS with NLS_CHARACTERSET=AL32UTF8 and set locale on server to ru_RU.iso88595
Now I can create dementions, members on russion language in Essbase without problems also I can create dementions,members,etc on russian language in Planning. But if I create demention or member in Planning on Russian languge and ) try refresh my Application with Essbase I give follow error
"=====(HspCubeCreation.java)sQueryString:?Application=Test1
com.hyperion.planning.olap.EssbaseException: (1060010)
at com.hyperion.planning.olap.HspEssbaseOutlineAPI.EssAddMemberEx(Native Method)
at com.hyperion.planning.olap.HspCubeRefreshTask.addChildren(Unknown Source)
at com.hyperion.planning.olap.HspCubeRefreshTask.addMembers(Unknown Source)
at com.hyperion.planning.olap.HspCubeRefreshTask.addDimensionsAndMembers(Unknown Source)
at com.hyperion.planning.olap.HspCubeRefreshTask.buildOutlines(Unknown Source)
at com.hyperion.planning.olap.HspCubeRefreshTask.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)"
Why it's happened?
Please anybody help me

since march 5 we are on planning 9.3.1.1 and also having problems with refreshing:
com.hyperion.planning.HspCubeRefreshInProgressException: Cannot complete your request because the database is being refreshed.
     at com.hyperion.planning.HspJSImpl.lockApp(I)V(Unknown Source)
     at com.hyperion.planning.HyperionPlanningBean.lockApp()V(Unknown Source)
     at HspSecurityFilter.Handle(Ljavax.servlet.http.HttpServletRequest;Ljavax.servlet.http.HttpServletResponse;)V(Unknown Source)
     at HspSecurityFilter.doPost(Ljavax.servlet.http.HttpServletRequest;Ljavax.servlet.http.HttpServletResponse;)V(Unknown Source)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:225)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:127)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:272)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:165)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3150)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:1973)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:1880)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1310)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:179)
com.hyperion.planning.HspCubeRefreshInProgressException: Cannot complete your request because the database is being refreshed.
     at com.hyperion.planning.olap.HspCubeRefreshTask.run()V(Unknown Source)
     at java.lang.Thread.run()V(Unknown Source)
anyone a idea?

Problem with N8

I am facing one problem with Nokia N8. I brought this New Nokia N8 phone from US to India so it is not at all functioning nor responding anything. When I tried to Switch ON this phone it is not responding anything. Can anybody suggest me what should I do to make this phone functions. Please anybody help me out of this issue.
I am now in India, when I contacted Nokia care here...they told me that the software of US version will not function in India...so its better to have the software of Indian version...Is this correct? Please provide me with a better solution.

Xenon flash cannot be used continually, so only applies to taking photographs; you'll have to provide your own illumination here!
Happy to have helped forum with a Support Ratio = 42.5

Travel management - problem with post a trip for an employee in India

Hi,
I am configure travel management for a customer, in there SAP system. I have already made the configuration for countries like Sweden, Finland, Italy, Germany etc, but when I should do it for India I can not save a trip in PR05. I have copied the configuration (schema) from Sweden to India (India has no schema in standard) and that is no problem, but when I should enter a trip and save in PR05 I have the following problem:
1. It seems like I am in US because travelling country is per default USA (it should be India when I have linked the employee to the company code for India in transaction code PO13 and PA40). I can change the country to IN (India).
2. When I enter an expense type and amount, the system have a tax code for USA per default (I have configured that this expense type should choose a tax code in India but the system choose one for USA). I can change it to an Indian tax code.
3. The system also ask for a tax jurisdiction code on the row for expense type. Here I can choose 9999 as a dummy. But I have no idea why I have to specify that. I think that is typical for USA?
4. When I have changed the country to IN, the tax code to an indian tax code and specified the jurisdiction tax code to 9999 and then save I have got the following error message:
" Customization for 1600 j_1iindcus missing in table
Message no. 8I303" and when I have googled on that error message I found that I should go to:
IMG-Logistics General-Tax on Goods movement -India-Basic Settings-Maintain COmpany code settings
but that is according to logistics and everything else in the system as purchase etc is working fine with no problem with tax jurisdiction code so I don´t guess that I should change anything there if I destroy anything else.
5. If I change the country to IN and not register any trip expense but instead register trip segment, that the employee should have compensation for travelling with its own car and then save I have got the message that I have not maintained the currency USD/rupie which is a sign of that the systém beleives that we are in USA.
Please help. I have no idea how to come around this.
Best regards Lisa

Hi again,
In transaction code FITVFELD I have IN as default country but if I change that country to another I still have US as trip country in PR05. In that transaction code (FITVFELD) I have domestic trip, international etc (like configuration in Sweden), but when I initialize a new trip for India I can not change trip type, if there is a domestic or international. When I do the same for Sweden I can choose so I wonder if the system get the information from USA from anywhere else.
I have also read about jurisdiction code and that is special for USA and Canada and then not for India?
Regards Lisa

Problem with Character set

Hi,
I am facing some problems with Oracle character sets.
I have set the database character set as UTF8.
I have set the environment variable NLS_CHAR to Portuguese_Portugal.UTF8.
I insert a Portuguese text for varchar and clob columns in a table.
However when I select the text from that table, I get some junk values for the clob.
Any help is appriciated. Thanx in advance.
Yash
null

Hi Yash,
Can u tell me how to insert values in a nchar/nvarchar column in
Indian language scripts?
I have set database characterset to 'IN8ISCII'? But while
inserting values in the table I am getting error as characterset
mismatch'
I have tried it using UTF8 chracterset also??
As fa as your problem is concerened, I think u have to set the
nls_ characterset value$ in props$ table
and same for nls_nchar_characterset column also..
Thanks in advance
Manoj mehta

Problems with verifying email address and SMTP set...

I have recently moved over to BT Infinity Broadband and regularly work from home. Recently I have been unable to send work emails (provided by 123 Reg) and having searched the forums I found a solution by using ny btinternet login details and verifying my email address.
However I have been able to verify two of my work email addresses but not the main and most important one. Each time I try I get an "invalid email address" error message. This is not causing too many problems with Outlook 2010 as I can still send and receive emails at present, hopefully this will remain.
However I do also use a case management software which sends emails. It requires a SMTP server details and port number. I have replicated these with the ones from Outlook, mail.btinternet.com and port number 465 but I am unable to send any emails.
I would be grateful if anybody could help me to verify my email address and also suggest what settings I would need for my case management software.
Many Thanks,
Will

I am a BT Premium Mail customer for my BT Talk21 e-mail account.
All was working fine on my PC and on my Mobile when I left the UK on 18t Sept.
In Greece, I was accessing e-mails, and responding to them, via the COSMOTE mobile network.
The problem started around 1st October, when I found that I could not reply to e-mails via my phone ("Sending Failed") - it would sometimes work if I switched my phone off an back on again, but I just couldn't send e-mails from my Android phone.
On my return to the UK, on 3rd Oct, I found that I couldn't send e-mails via my Outlook 2010 client on my Windows 7 Computer, directly connected to my router- getting error message 522 (account set up as POP3)
Test message returns:
"Send test e-mail message: Your outgoing (SMTP) e-mail server has reported an internal error. If you continue to receive this message, contact your server administrator or Internet service provider (ISP). The server responded: 522 Your message has not been sent as you are accessin"
So, 2 separate devices, connected differently, where experiencing the same problem - the commonality BT E-mail severs.
I spent 2 days of absolute hell with BT's Indian call centres who were worse than useless - refusing to accept that this was a BT sever-related issue.
VOL 012-*********** – 4th Oct
VOL 012-*********** – 4th Oct
On my Mobile, as a test, I deleted my (POP3) mobile account on my phone, the idea to re-instate it.
On trying to set it up again, the BT mails servers wouldn't allow me to set it up as POP3 (even though up until the point of the problem it was POP3).
However, it eventually allowed me to set it up as SMTP/IMAP - and I can now send and recieve e-mails on my Talk21 account on my mobile. Although, being IMAP/SMTP it now deletes mails off the server if I delete them on my phone - which I found out the hard way.
My Outlook client on my computer still cannot send e-mails - returning the error code 522.
I have also accessed my account via webmail (which seems to work both ways) and have changed and verified my passwords, but the problem still exists.
In addition, my daughter also has a Talk21 Premium Mail account, and accessing via a different computer Microsoft Mail on a Vista machine, and she is experiencing the same problem.
I find out today that BT is withdrawing from Yahoo and is changing/has changed it's e-mail systems.
The problems I and my daughter are experiencing appear to be general BT Mail Server problems that need to addressed centrally, and not a single-user level as the likelihood is that many are affected.
I would like BT to look into this as a matter of urgency.

Problem with Indian Languges

Similar Messages

Maybe you are looking for