Problem with Legend

Post Author: usamaalam
CA Forum: General
Hello everybody,I am showing up answers for each question in the form of a pie chart. The pie chart shows what percentage of each answer was selected by different users. I am showing up the percentage of count of AnswerID, but in the legend it also shows AnswerID. Is there a way to format the Legend so that it shows Answers instead of AnswerID [I already have Answer field in the stored procedure I am using to get the data for the chart].I have attached a snapshot of the chart, there are two answers available in database table with AnswerID 29 and 30. I need to show actual Answers in Legend instead of 29 and 30.Thanks.

Hi All,
any idea on this issue...??
Edited by: N R Pradeep Reddy on Oct 23, 2008 3:05 PM

Similar Messages

Problems with Legend

Hi, all
I want to write a custom legend control or wirte a custom
legendItem with more lables and textInput to disply data read from
the corresponding chart. But I do not know how to position these
new added controls. When I just use addChild in constructor, all
children overlapped.
I know the Legend Control extends from Tile, but I do not
know how to use it in my custom Legend control.
I am a absolute newbie to Flex. Please help me.
Thank you very much.

Yes, there are a lot of problems with that.
Tip: LabVIEW is not for advanced user interface, especially in resizing. Fonts do not resize, some elements can not be controlled independently, manual change is not smooth, etc. Limit the designer imagination.
Workaround: Remove autosize plot. Capture event This VI -> Panel resize and recalculate property Plot Area -> Size

Problem with Legend Representation.

Dear All,
any inputs on this issue ....
We have a Pie Chart which represents the data in categories and a LEGEND for understanding the ranges for categories .
We have provided navigation block for further data analysis.
Quoting an example which gives you an idea of issue.
I am categorizing all students in a school into 3 categories as
S grade, M grade and A grade.
At legend level I m representing as
GREEN    - S marks > =90
YELLOW - M marks >= 80 and <90
RED         - A marks < 80
But now when we restricting the data with the fields in the navigation block, say by Department of a Student.
The colors of the legends are varying...not as the defaultu2026
which I mean to say is that it is not accepting the Color
Constraints which I have mentioned for each grade separately,
In a department XYZ, I had 5 students only ,all with S rating
Now we should get a pie chart represented with Green with a count of 5.(we are able to achieve this)
and the default legend should be
GREEN    - S marks > =90
YELLOW - M marks >= 80 and <90
RED         - A marks < 80
but the we are not able to achieve the legend with is defined
but the legend is showing 3 different green shades for 3 categories S grade, M grade and A grade (other than standard defined colours),which actually should be GREEN for - S grade YELLOW for - M grade and RED for - A grade.
Can you help me in achieving the 3 different(Green,Yellow,Green) colors in Legend and suggest me how to overcome this issue.
Please do the needful..
Regards,
Pradeep.

Hi All,
any idea on this issue...??
Edited by: N R Pradeep Reddy on Oct 23, 2008 3:05 PM

Problem with an update page.

I have a problem with an update page on my website
Here's how it work
values are defualted in from the advert table - this works fine
I should then be able to change the fields and click on the update button
This works fine but ONLY when the O_year field is populated.
There doesn't seem to be anything special about the O_year field
I thought spry text validation would of been causing the issues, but I removed them and have the same problem.
For some reason the POST_MMupdate value is not being set to 'form4', which it is doing if O_year is set.
Please can someone have a look at this, code,
Also, is there a way of 'stepping through' dreamweaver code to debug it?
Thanks
Adam
$colname_Advert = "-1";
if (isset($_GET['advert_id'])) {
$colname_Advert = $_GET['advert_id'];
mysql_select_db($database_guitarswap_db, $guitarswap_db);
$query_Advert = sprintf("SELECT * FROM advert WHERE advert_id = %s", GetSQLValueString($colname_Advert, "int"));
$Advert = mysql_query($query_Advert, $guitarswap_db) or die(mysql_error());
$row_Advert = mysql_fetch_assoc($Advert);
$totalRows_Advert = mysql_num_rows($Advert);
if ((isset($_POST["MM_update"])) && ($_POST["MM_update"] == "form4"))
    //Сheck that we have a file
if((!empty($_FILES["PictureLocation"])) && ($_FILES['PictureLocation']['error'] == 0))
      //Check if the file is JPEG image and it's size is less than 350Kb
      $filename = basename($_FILES["PictureLocation"]["name"]);
      $ext = substr($filename, strrpos($filename, '.') + 1);
      if (($ext == "jpg") && ($_FILES["PictureLocation"]["type"] == "image/jpeg") &&
    ($_FILES["PictureLocation"]["size"] < 350000))
        //Determine the path to which we want to save this file
          $newname = dirname(__FILE__).'/upload/'.$filename;
          //Check if the file with the same name is already exists on the server
          if (!file_exists($newname))
            //Attempt to move the uploaded file to it's new place
            if ((move_uploaded_file($_FILES['PictureLocation']['tmp_name'],$newname)))
                   // echo "It's done! The file has been saved as: ".$newname;
            else
                   // echo "Error: A problem occurred during file upload!";
        else
             // echo "Error: File ".$_FILES["PictureLocation"]["name"]." already exists";
      else
         // echo "Error: Only .jpg images under 350Kb are accepted for upload";
    else
     // echo "Error: No file uploaded";
    $filename=$row_Advert['PictureLocation'];
    // set default opentoalloffers
if (!isset($_POST['checkopentoalloffers']))
    $_POST['checkopentoalloffers'] = 'n';
$updateSQL = sprintf("UPDATE advert SET PictureLocation=%s, O_Make=%s, O_Model=%s, O_Country=%s, O_Year=%s, O_Colour=%s, O_Body=%s, O_Neck=%s, O_Fingerboard=%s, O_Pickups=%s, `value`=%s, `condition`=%s, W_Make=%s, W_Model=%s, W_Country=%s, W_Year=%s, W_Colour=%s, W_Body=%s, W_Neck=%s, W_Fingerboard=%s, W_Pickups=%s, Comments=%s, opentoalloffers=%s, ChangeFlg = %s WHERE advert_id=%s",
                       GetSQLValueString($filename, "text"),
                       GetSQLValueString($_POST['O_Make'], "text"),
                       GetSQLValueString($_POST['O_Model'], "text"),
                       GetSQLValueString($_POST['O_Country'], "text"),
                       GetSQLValueString($_POST['O_Year'], "date"),
                       GetSQLValueString($_POST['O_Colour'], "text"),
                       GetSQLValueString($_POST['O_Body'], "text"),
                       GetSQLValueString($_POST['O_Neck'], "text"),
                       GetSQLValueString($_POST['O_Fingerboard'], "text"),
                       GetSQLValueString($_POST['O_Pickups'], "text"),
                       GetSQLValueString($_POST['value'], "int"),
                       GetSQLValueString($_POST['condition'], "text"),
                       GetSQLValueString($_POST['W_Make'], "text"),
                       GetSQLValueString($_POST['W_Model'], "text"),
                       GetSQLValueString($_POST['W_Country'], "text"),
                       GetSQLValueString($_POST['W_Year'], "date"),
                       GetSQLValueString($_POST['W_Colour'], "text"),
                       GetSQLValueString($_POST['W_Body'], "text"),
                       GetSQLValueString($_POST['W_Neck'], "text"),
                       GetSQLValueString($_POST['W_Fingerboard'], "text"),
                       GetSQLValueString($_POST['W_Pickups'], "text"),
                       GetSQLValueString($_POST['Comments'], "text"),
                       GetSQLValueString($_POST['checkopentoalloffers'], "text"),
                       GetSQLValueString('y', "text"),
                       GetSQLValueString($_POST['advert_id'], "int"));
mysql_select_db($database_guitarswap_db, $guitarswap_db);
$Result1 = mysql_query($updateSQL, $guitarswap_db) or die(mysql_error());
    $updateGoTo = "Member2.php";
     if (isset($_SERVER['QUERY_STRING'])) {
       $updateGoTo .= (strpos($updateGoTo, '?')) ? "&" : "?";
       $updateGoTo .= $_SERVER['QUERY_STRING'];
     header(sprintf("Location: %s", $updateGoTo));
?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Untitled Document</title>
<link href="Layout3.css" rel="stylesheet" type="text/css" />
<script src="SpryAssets/SpryMenuBar.js" type="text/javascript"></script>
<script src="SpryAssets/SpryValidationTextField.js" type="text/javascript"></script>
<link href="SpryAssets/SpryMenuBarHorizontal.css" rel="stylesheet" type="text/css" />
<link href="SpryAssets/SpryMenuBarVertical.css" rel="stylesheet" type="text/css" />
<style type="text/css">

</style>
<script type="text/javascript">

</script>
<link href="SpryAssets/SpryValidationTextField.css" rel="stylesheet" type="text/css" />
</head>
<body class="twoColFixLtHdr">
<div id="container">
<div id="header">
    <div id="Righty">
      <ul id="MenuBar2" class="MenuBarHorizontal">
    <li><a href="index.php">Search</a>      </li>
    <li><a href="Member2.php">Members</a></li>
</ul>
<p> </p>
</div>
<span id="LoginDiv">
    <?php
      if (isset($_SESSION['MM_Username']))
        echo "hello ". $_SESSION['MM_Username']. "";
        echo " <a href='Logout.php'>Log out</a> ";
    else
        echo "
            <a href='Login.php'>Login</a> / <a href='Register.php'>Register</a>
    ?>
    </a></span>
<div id="Middle">
<h1 align="center">GuitarSwap</h1>
</div>
</div>
<div id="sidebar1">
    <h4>Members Area</h4>
    <ul id="MenuBar1" class="MenuBarVertical">
      <li><a href="Member2.php">My Adverts</a></li>
      <li><a href="NewAdvert.php">Create new Advert</a></li>
      <li><a href="UpdateUserDets.php">My Account</a></li>
    </ul>
    <h3> </h3>
</div>
<div id="mainContent">
    <h4>Update Advert</h4>
    
</div>

<div id="main3">
    <div id="main">
      <fieldset>
        <legend>Please update advert details and confirm</legend>
        <form action="<?php echo $editFormAction; ?>" enctype="multipart/form-data" method="post" name="form4" id="form4">
          <input type="hidden" name="advert_id" value="<?php echo $row_Advert['advert_id']; ?>" />
          <p></p>
          <table width="650" align="center">
            <tr valign="baseline">
              <td width="17" rowspan="15" valign="middle" nowrap="nowrap"><?php echo "<img src='upload/" .$row_Advert['PictureLocation']."' width='64' height='180'/>" ?></td>
              <td width="133" align="right" nowrap="nowrap"> </td>
              <td width="240" align="center" bgcolor="#CCCCCC"><strong>Offered</strong></td>
              <td width="240" align="center" bgcolor="#CCCCCC"><strong>Wanted</strong></td>
            </tr>
            <tr valign="baseline">
              <td nowrap="nowrap" align="right"><strong>Make:</strong></td>
              <td bgcolor="#CCFFCC"><input name="O_Make" type="text" value="<?php echo $row_Advert['O_Make']; ?>" size="30" maxlength="15" /></td>
              <td bgcolor="#CCFFFF"><input name="W_Make" type="text" value="<?php echo $row_Advert['W_Make']; ?>" size="30" maxlength="15" /></td>
            </tr>
            <tr valign="baseline">
              <td nowrap="nowrap" align="right"><strong>Model:</strong></td>
              <td bgcolor="#CCFFCC"><input name="O_Model" type="text" value="<?php echo $row_Advert['O_Model']; ?>" size="30" maxlength="30" /></td>
              <td bgcolor="#CCFFFF"><input name="W_Model" type="text" value="<?php echo $row_Advert['W_Model']; ?>" size="30" maxlength="30" /></td>
            </tr>
            <tr valign="baseline">
              <td nowrap="nowrap" align="right"><strong>Country:</strong></td>
              <td bgcolor="#CCFFCC"><input name="O_Country" type="text" value="<?php echo $row_Advert['O_Country']; ?>" size="30" maxlength="15" /></td>
              <td bgcolor="#CCFFFF"><input name="W_Country" type="text" value="<?php echo $row_Advert['W_Country']; ?>" size="30" maxlength="15" /></td>
            </tr>
            <tr valign="baseline">
              <td nowrap="nowrap" align="right"><strong>Year:</strong></td>
              <td bgcolor="#CCFFCC"><span id="sprytextfield1">
              <input name="O_Year" type="text" value="<?php echo $row_Advert['O_Year']; ?>" size="4" maxlength="4" />
<span class="textfieldInvalidFormatMsg">Invalid format.</span><span class="textfieldMinValueMsg">The entered value is less than the minimum required.</span><span class="textfieldMaxValueMsg">The entered value is greater than the maximum allowed.</span></span></td>
              <td bgcolor="#CCFFFF"><span id="sprytextfield2">
              <input name="W_Year" type="text" value="<?php echo $row_Advert['W_Year']; ?>" size="4" maxlength="4" />
<span class="textfieldInvalidFormatMsg">Invalid format.</span><span class="textfieldMinValueMsg">The entered value is less than the minimum required.</span><span class="textfieldMaxValueMsg">The entered value is greater than the maximum allowed.</span></span></td>
            </tr>
            <tr valign="baseline">
              <td nowrap="nowrap" align="right"><strong>Colour:</strong></td>
              <td bgcolor="#CCFFCC"><input name="O_Colour" type="text" value="<?php echo $row_Advert['O_Colour']; ?>" size="30" maxlength="15" /></td>
              <td bgcolor="#CCFFFF"><input name="W_Colour" type="text" value="<?php echo $row_Advert['W_Colour']; ?>" size="30" maxlength="15" /></td>
            </tr>
            <tr valign="baseline">
              <td nowrap="nowrap" align="right"><strong>Body:</strong></td>
              <td bgcolor="#CCFFCC"><input name="O_Body" type="text" value="<?php echo $row_Advert['O_Body']; ?>" size="30" maxlength="15" /></td>
              <td bgcolor="#CCFFFF"><input name="W_Body" type="text" value="<?php echo $row_Advert['W_Body']; ?>" size="30" maxlength="15" /></td>
            </tr>
            <tr valign="baseline">
              <td nowrap="nowrap" align="right"><strong>Neck:</strong></td>
              <td bgcolor="#CCFFCC"><input name="O_Neck" type="text" value="<?php echo $row_Advert['O_Neck']; ?>" size="30" maxlength="15" /></td>
              <td bgcolor="#CCFFFF"><input name="W_Neck" type="text" value="<?php echo $row_Advert['W_Neck']; ?>" size="30" maxlength="15" /></td>
            </tr>
            <tr valign="baseline">
              <td nowrap="nowrap" align="right"><strong>Fingerboard:</strong></td>
              <td bgcolor="#CCFFCC"><input name="O_Fingerboard" type="text" value="<?php echo $row_Advert['O_Fingerboard']; ?>" size="30" maxlength="15" /></td>
              <td bgcolor="#CCFFFF"><input name="W_Fingerboard" type="text" value="<?php echo $row_Advert['W_Fingerboard']; ?>" size="30" maxlength="15" /></td>
            </tr>
            <tr valign="baseline">
              <td nowrap="nowrap" align="right"><strong>Pickups:</strong></td>
              <td bgcolor="#CCFFCC"><input name="O_Pickups" type="text" value="<?php echo $row_Advert['O_Pickups']; ?>" size="30" maxlength="15" /></td>
              <td bgcolor="#CCFFFF"><input name="W_Pickups" type="text" value="<?php echo $row_Advert['W_Pickups']; ?>" size="30" maxlength="15" /></td>
            </tr>
            <tr valign="baseline">
              <td nowrap="nowrap" align="right"><strong>Condition:</strong></td>
              <td bgcolor="#CCFFCC"><label for="condition">
                <select name="condition" size="1" id="condition">
                  <option selected="selected" value="" <?php if (!(strcmp("", $row_Advert['condition']))) {echo "selected=\"selected\"";} ?>>---select---</option>
                  <option value="immaculate" <?php if (!(strcmp("immaculate", $row_Advert['condition']))) {echo "selected=\"selected\"";} ?>>immaculate</option>
                  <option value="excellent" <?php if (!(strcmp("excellent", $row_Advert['condition']))) {echo "selected=\"selected\"";} ?>>excellent</option>
                  <option value="good" <?php if (!(strcmp("good", $row_Advert['condition']))) {echo "selected=\"selected\"";} ?>>good</option>
                  <option value="well used" <?php if (!(strcmp("well used", $row_Advert['condition']))) {echo "selected=\"selected\"";} ?>>well used</option>
                  <option value="poor" <?php if (!(strcmp("poor", $row_Advert['condition']))) {echo "selected=\"selected\"";} ?>>poor</option>
              </select>
              </label></td>
              <td bgcolor="#FFFFFF"> </td>
            </tr>
            <tr valign="baseline">
              <td nowrap="nowrap" align="right"><strong>Value:</strong></td>
              <td bgcolor="#CCFFCC"><span id="sprytextfield3">
              <input name="value" type="text" value="<?php echo $row_Advert['value']; ?>" size="11" maxlength="11" />
<span class="textfieldInvalidFormatMsg">Invalid format.</span></span></td>
              <td bgcolor="#FFFFFF"> </td>
            </tr>
            <tr valign="baseline">
              <td align="right" valign="top" nowrap="nowrap"><strong>Comments:</strong></td>
              <td bgcolor="#CCFFCC"><textarea name="Comments" cols="25" rows="3"><?php echo $row_Advert['Comments']; ?></textarea></td>
              <td bgcolor="#FFFFFF"> </td>
            </tr>
            <tr valign="baseline">
              <td nowrap="nowrap" align="right"><strong>Picture location</strong></td>
              <td bgcolor="#CCFFCC"><label for="checkopentoalloffers"></label>                <input type="file" name="PictureLocation" value="<?php echo $row_Advert['PictureLocation']; ?>" size="20" /></td>
              <td bgcolor="#FFFFFF"> </td>
            </tr>
            <tr valign="baseline">
              <td height="26" align="right" nowrap="nowrap"><strong>Open to all offers:</strong></td>
              <td bgcolor="#CCFFCC"><input name="checkopentoalloffers" type="checkbox" id="checkopentoalloffers" value="y" <?php if (!(strcmp($row_Advert['opentoalloffers'],"y"))) {echo "checked=\"checked\"";} ?> /></td>
              <td bgcolor="#FFFFFF"> </td>
            </tr>
          </table>
          <p> </p>
          <div id="submitdiv">
            <input type="hidden" name="MM_update" value="form4" />
            <input name="submit button" type="submit" id="submit button" value="Update Advert" />
          </div>
          <div id="exitdiv">
            <label for="button15"></label>
            <input name="button" type="button" id="button15" onclick="MM_goToURL('parent','Member2.php');return document.MM_returnValue" value="Exit" />
            <label for="button16"></label>
          </div>
          <p> </p>
        </form>
      </fieldset>
      <script type="text/javascript">
var sprytextfield1 = new Spry.Widget.ValidationTextField("sprytextfield1", "integer", {validateOn:["blur"], minValue:1900, maxValue:2010, isRequired:false});
var sprytextfield1 = new Spry.Widget.ValidationTextField("sprytextfield1", "integer", {validateOn:["blur"], minValue:1900, maxValue:2010});
var sprytextfield2 = new Spry.Widget.ValidationTextField("sprytextfield2", "integer", {minValue:1900, maxValue:2010, validateOn:["blur"], isRequired:false});
var sprytextfield3 = new Spry.Widget.ValidationTextField("sprytextfield3", "currency", {validateOn:["blur"], isRequired:false});
      </script>
      <br class="clearfloat" />

</div></div></div>
<script type="text/javascript">

</script>
</body>
</html>
<?php
mysql_free_result($Advert);
if (is_resource($Result1)) mysql_free_result($Result1);
?>

Please note,
Removing I investigated spry a little more, in the end I settled for removing spry altogether,
Maybe it was because the text field in a $GET (for the default) AND a $PUT (for the update)

Problem with FTE in DataTips of PlotChart (missing texts)

Hi @all,
we have decided to use the Flex 4.1 and Flash text engine in our projects.
Now I have the following problem with the dataTips: the texts are appearing only partly if datatips of more than one point are showing. The behavior is not regularly.
Here is my code for testing (compiler options: hook at "Use Flash Text engine in MX components":
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
xmlns:s="library://ns.adobe.com/flex/spark"
xmlns:mx="library://ns.adobe.com/flex/mx"
minWidth="955"
minHeight="600"
creationComplete="init()">
<fx:Declarations>
    <mx:SolidColor id="sc1" color="#EC6605" alpha=".3"/>
    <mx:SolidColorStroke id="s1" color="#EC6605" weight="1"/>
</fx:Declarations>
<fx:Script>
    <![CDATA[
      import mx.charts.HitData;
      import mx.collections.ArrayCollection;
      [Bindable]
      private var seriesAverageScores:ArrayCollection = new ArrayCollection(new Array());
      private static const tipDataString:String = "zeile 1 zeile 1 zeile 1\nzeile 2 zeile 2 zeile 2\nzeile 3 zeile 3 zeile 3\nzeile 4 zeile 4 zeile 4\n -\n -\n -";
      private function init():void {
        seriesAverageScores.addItem({x: 1, y: 2, dataTip: tipDataString});
        seriesAverageScores.addItem({x: 2, y: 2, dataTip: tipDataString});
        seriesAverageScores.addItem({x: 3, y: 2, dataTip: tipDataString});
        seriesAverageScores.addItem({x: 1.1, y: 2, dataTip: tipDataString});
        seriesAverageScores.addItem({x: 2, y: 2, dataTip: tipDataString});
        seriesAverageScores.addItem({x: 3, y: 2, dataTip: tipDataString});
        seriesAverageScores.addItem({x: 1.05, y: 2, dataTip: tipDataString});
        seriesAverageScores.addItem({x: 2, y: 2, dataTip: tipDataString});
        seriesAverageScores.addItem({x: 3, y: 2, dataTip: tipDataString});
        seriesAverageScores.addItem({x: 0.95, y: 2, dataTip: tipDataString});
        seriesAverageScores.addItem({x: 2, y: 2, dataTip: tipDataString});
        seriesAverageScores.addItem({x: 3, y: 2, dataTip: tipDataString});
        seriesAverageScores.addItem({x: 1.2, y: 2, dataTip: tipDataString});
        seriesAverageScores.addItem({x: 2, y: 2, dataTip: tipDataString});
        seriesAverageScores.addItem({x: 3, y: 2, dataTip: tipDataString});
        seriesAverageScores.addItem({x: 1.15, y: 2, dataTip: tipDataString});
        seriesAverageScores.addItem({x: 2, y: 2, dataTip: tipDataString});
        seriesAverageScores.addItem({x: 3, y: 2, dataTip: tipDataString});
        seriesAverageScores.addItem({x: 1.12, y: 2, dataTip: tipDataString});
        seriesAverageScores.addItem({x: 2, y: 2, dataTip: tipDataString});
      private function dataTipFunction_average(hd:HitData):String {
        var val:String;
        var d:Object = hd.item as Object;
        return d.dataTip;
    ]]>
</fx:Script>
<s:VGroup width="100%"
    height="100%">
    <mx:PlotChart id="myChart1" width="100%" height="100%"
      dataTipFunction="dataTipFunction_average" showDataTips="true">
      <mx:verticalAxis>
        <mx:LinearAxis title="TurnOvers" padding="0.1" minimum="0" maximum="50"/>
      </mx:verticalAxis>
      <mx:horizontalAxis>
      <mx:LinearAxis title="Scores" padding="0.1" minimum="0" maximum="10"/>
      </mx:horizontalAxis>
      <mx:series>
        <mx:PlotSeries dataProvider="{seriesAverageScores}"
          name="series 1" fill="{sc1}" stroke="{s1}"
          displayName="Average Scores per customer"
          xField="x"
          yField="y">
        </mx:PlotSeries>
      </mx:series>
    </mx:PlotChart>
</s:VGroup>
</s:Application>
Has anyone an idea how to solve this ?
Thanks, Lutz

Has noone an idea?
The same problem exists with Legends. For this there was a help from Adobe with a style.
Isn't there a comparable solution for this malfunction?

Can't start laptop - problems with automatic repair, need acces to admin account but there is none. HELP! :(

Hello,
I'm having problems with my windows 8 laptop.
This afternoon I shut it down, and went to work. A few hours later when I came back home I noticed the little blue lights on the keyboard (showing me that the pc was charging and that my wifi is on) were still on. Normally these are off when the pc is turned
off.
I tried starting the laptop but nothing happened, the screen stayed black. I held down the 'on' button to force it to turn off, and turned it on again.
I then got a textmessage on the startup loading screen that there were problems with my C drive (only drive the laptop has), so it went to automatic repair.
*my laptop's language is set to Dutch so I'm translating everything :)*
It gave me 2 options:
1: Restart computer
2: Advanced options.
I tried option 1, didnt work ofcourse, it just restarted and I got back to this screen, so I checked what option 2 had to offer.
I got to a screen with 3 options:
1: Continue to windows 8
2: Solve Problems
3: Shut down
When I tried option 1 the computer just restarted and went back to the same screen.
When I tried option 3 it shut down as it should.
Option 2 gave me 3 other options:
1: Renew PC
2: Factory reset
3: advanced options
Option 1 just restarted my pc and took me back to screen 1.
Option 2 I havent tried yet, because it erases all of my files. This is a last resort.
Option 3 gave me 6 other options:
1: Systemrepair
2: Repair with installationcopy
3: Startuprepair
4: CMD
5: UEFI firmware settings
6. Startupsettings.
I can't use option 1,2,3,4 because I need to log in to an administratoraccount.
The bad part is: the laptop doesn't have an administratoraccount.
It was my parents laptop, and theyve set it up. I always assumed the account was an admin because
I had acces to everything and didn't need a password to run things as admin and such.
Turns out it isn't.
I get this message (translated) when I try to acces one of these:
'You have to log in as administrator to continue, but this pc doesn't have an administratoraccount'.
I can't believe microsoft added a check to see if the pc has an admin account on it, and even added a specific message to show when it doesn't, but they didnt add the option to just use these tools when there is no admin account present? What were they thinking!
Option 5 I havent tried yet, when I click it it says I have to restart to acces these settings, but I dont want to mess with something I know nothing about.
Option 6 gives me a few options like run the pc in safety mode, run windows repair and disable auto-restart after something has gone wrong with windows. But when I select one of these options it doesnt work. It just takes me back to auto repair. It just doesn't
doe anything.
There are no other options. Nothing I can do. My pc is stuck like this. The only thing I *might* be able to do is a factory reset, but I havent tried, and that could also just give me an error about me not being admin.
Some backstory of what I think caused this problem:
I believe the problems started a week ago, last friday.
I'm using a program called 'AVG TuneUp'. This program gave me a message telling me it was 3 months since it had checked my C drive for defects or anything. And it asked me if I wanted it to do so. Unknowing of the problems that would follow, I pressed 'ok'
(or whatever it was).
I had to restart my pc for it to begin, because it could only check the drive during startup. It went to 12% and stayed there for like half an hour, after which I decided to google (on my phone) if that was normal. It turned out that that option doesn't work
well with windows 8 and that lots of people's computers got ruined after using it. I stressed and I tried to shut it down, but since I was still in startup the only thing I could do was force the pc to shut down, so I held down the power button and it shut
down. I restarted and managed to abort the proces. The laptop started fine and everything worked.
A few days later a game/program I use called League of Legends started to act weird, because I could not log in on my account (for the game) anymore. Some error with IE settings, which I was unable to fix. For more info about that go to http://boards.eune.leagueoflegends.com/en/c/help-support-en/8Eoz315J-cant-log-in-to-lol-and-cant-log-in-to-steam-either-weird-coincidence.
Although I doubt it will help.
That forum post also contains a link to a post I made on the Steam forum about not being able to log into steam anymore. (Steam is another program I used). I wasn't able to log into steam anymore about 1-2 days after I wasn't able to log into LoL.
Also at the same time my Norton sortof stopped working. It showed up as active in my task manager and AVG TuneUp program manager, but it wasn't in my task bar and I couldnt acces the control panel.
Then yesterday I checked my pc for errors with AVG TuneUp's 1-click maintenance tool, and it told me my C drive was fragmented badly, so I defragmented it using the tool. Laptop still worked fine after that.
And then today I got the error on startup about my C drive having errors.
Long story shot: Problem is probably caused because I stopped the repair of my C drive with the avg tuneup tool before it was done, however its weird that I'm only experiencing (big) problems a week after that happened.
Hardware info:
It's a Samsung Ativ book 6 (google it for all the specs :) )
RAM: 8 GB DDR3
CPU: intel 3230M @ 2.60 gHz
GPU: AMD Radeon HD 8850M
HDD: 1 TB S-ATAII hard disc
I've found this page:
http://answers.microsoft.com/en-us/windows/forum/windows_8-system/windows-8-taking-me-to-automatic-repair-but-no/6cbc995e-9ecb-4e28-8d6c-adabdecb8374?rtAction=1424369231072
But I don't really understand what the answering person is saying, and my laptop doesn't have a CD drive..
I really, REALLY hope someone can help me with this, because my laptop is basically 100% 'destroyed'.
Kind regards,
Christian Collaert

Hello,
Perhaps the operating system is incorrectly powering down or shifting the wireless adapter to a low power state in order to improve run time while on battery?
Try going into the Device Manager (filename: DEVMGMT.MSC), locate the wireless adapter under the Network Adapters tree, view its Properties, and on the Power Management tab, disable (un-check) the Allow the computer to turn off this device to save power option.
Please let us know if that makes any difference (or not).
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

Problem with Stacked Bar Chart

I have a problem with a stacked bar chart in Numbers 09. My chart is a single series with 6 categories. All of the categories have different values. The first 5 categories display correctly. However, the last category does not display in the color its supposed to, but rather shows up as white/background instead of the grey color shown on the legend. However, the value label is displayed in the proper place.
When I select other chart types (pie, regular bar, or regular column) the category shows up like it's supposed to.
This is kind of annoying since I would rather use stacked bar instead of a pie chart. Is there an upper limit on the number of values it can display as a stacked bar chart? Is this just a bug? Thanks!

Here's my result with six values in a single series. I double clicked the last bar to change its colour from the default grey (which was visible) to magenta.
Numbers 2.0.3, iBook G4, OS X v10.4.11
(Shot in the dark:) Try double clicking the value label, then changing the order position of this item.
Regards,
Barry

Chart - problem with stack

Hello,
Ive got 3 problems with stack plots:
1. In the legend, the first value of table is the last one, why?
2. Always when i remove one value(in this case i turn off button), the last chart is remove
3. When I turn off the second button(rest is on), the plot name in legend is doubled.
Does anyone have an idea what i can do with this?
thanks for any answers.
Solved!
Go to Solution.
Attachments:
Desktop.zip ‏24 KB

Well, you simply need to code it differently.
Try this:
LabVIEW Champion . Do more with less code and in less time .
Attachments:
top-levelMOD2.vi ‏13 KB

Nokia Lumia 1520 having problems with Voyager Lege...

I recently purchased Nokia Lumia 1520 and I am having some problems with Plantronics Voyager Legend. Before 1520 I was using HTC Radar 4G with Plantronics Voyager Legend and I don't have any problems. The problems that I am having are, when I am on a call using the Plantronics Voyager Legend the voice of the person will automatically switched between Plantronics Voyager Legend and 1520 through out the entire conversation back and forth. It does read all my text messages without any problems. Another problem is on my HTC Radar 4G once I turn on the Bluetooth under setting Bluetooth stays on even after I reboots the phone. On 1520 after rebooting the phone Bluetooth is off automatically by the Windows 8. Why does it do that? Are there any workaround or fixes for my issues

My Voyager Legend firmware is up to date. This Voyager Legend works with all my others electronics without any problems. Problem with Nokia Lumia 1520 only. I think the problem is 1520 Windows 8 OS. I am waiting on Plantronics to contact me but looks like I am at the bottom of the list. Does anyone know why after rebooting the 1520, Nokia Windows 8 OS automatically turn the Bluetooth off in setting, under Bluetooth everytime?

SSRS 2008: how to show an empty chart with legend and x and y axis when no data available

Hi,
I am using SSRS 2008, I generated one chart in report designer with the data from Analysis Services (Cube).
According to the dataset, there is no data returned when I run the query. so when I preview the chart, there is nothing but "no data available" showing on the chart.
Here I want to know is there any possible to show an empty chart with legend and x and y axis?
If it is possible, can you tell me how can I make it?
Best Regards.
Connie Zhu

Hi,
When there is no data, the chart displays the message "no data available". But using a little work around, you can display an empty chart.
Please find the below steps given to achieve this
1. Create a new dataset using TSQL to return 1 row of data having the category field and value field set to 0. Add the fields that are necessary for the category fields, series fields and datafields.
   A simple example would be like
   SELECT 'abc' as Category, 0 as Amount
2. Add a new chart, set the category field to 'Category' and set the data field to Amount from above dataset created in step 1.
3. In the new chart, right click the category axis and select axis properties, Click on the labels tab, check on
'Hide axis labels' and then click ok
4. Now set the Visibility property of both the charts depending on the rows returned from your main dataset
   a. click on your main chart and set its Hidden property to :
=iif(CountRows("MainDataSet"),false,true)
   b. click on the new blank chart added and set its Hidden proprety to (the opposite) :
=iif(CountRows("MainDataSet"),true,false)
   Note : Please change the dataset name in above expression "MainDataset" to the name of your chart's dataset
5. Resize the new chart to the same size as your main chart, then position the new chart on the place as the main chart.
   (Note : You can set the position of new chart to be same by copying the location property from the main chart)
6. Now run and observe the result. When there are no rows returned by your main dataset, the new chart (the blank chart) should be displayed.
I've added a working sample of this kind of a report
here.
Hope this helps. Please feel free to discuss if you have any questions.
Please click "Mark as Answer" if this resolves your problem or "Vote as Helpful" if you find it helpful.
BH

Stacked 100% bar chart - Problem with datatips for zero value data points

I have a stacked 100% bar chart that shows datatips in Flex 4.   However, I don't want it to show datatips for
data points with zero values.   Flex 4 shows the datatip for a zero value data point on the left side of a bar if the data point is not the first in the series.
Here's the code that illustrates this problem.    Of particular concern is the July bar.    Because of the zero value data point problem, it's not possible to see the datatip for "aaa".
Any ideas on how we can hide/remove the datatips for zero value data points ?        Thanks.
<?xml version="1.0"?>
<s:Application
xmlns:fx="
http://ns.adobe.com/mxml/2009"xmlns:mx="
library://ns.adobe.com/flex/mx"xmlns:s="
library://ns.adobe.com/flex/spark"creationComplete="initApp()"
height="
1050" width="600">
<s:layout>
<s:VerticalLayout/>
</s:layout>
<fx:Script><![CDATA[
import mx.collections.ArrayCollection;[
Bindable]
private var yearlyData:ArrayCollection = new ArrayCollection([{month:
"Aug", a:1, b:10, c:1, d:10, e:0},{month:
"July", a:1, b:10, c:10, d:10, e:0},{month:
"June", a:10, b:10, c:10, d:10, e:0},{month:
"May", a:10, b:10, c:10, d:0, e:10},{month:
"April", a:10, b:10, c:0, d:10, e:10},{month:
"March", a:10, b:0, c:10, d:10, e:10},{month:
"February", a:0, b:10, c:10, d:10, e:10},{month:
"January", a:10, b:10, c:10, d:10, e:10}]);
private function initApp():void {}
]]>
</fx:Script>
<s:Panel title="Stacked Bar Chart - Problems with DataTips for Zero Value Items" id="panel1">
<s:layout>
<s:HorizontalLayout/>
</s:layout>
<mx:BarChart id="myChart" type="stacked"dataProvider="
{yearlyData}" showDataTips="true">
<mx:verticalAxis>
<mx:CategoryAxis categoryField="month"/>
</mx:verticalAxis>
<mx:series>
<mx:BarSeries
xField="a"displayName="
aaa"/>
<mx:BarSeries
xField="b"displayName="
bbb"/>
<mx:BarSeries
xField="c"displayName="
ccc"/>
<mx:BarSeries
xField="d"displayName="
ddd"/>
<mx:BarSeries
xField="e"displayName="
eee"/>
</mx:series>
</mx:BarChart>
<mx:Legend dataProvider="{myChart}"/>
</s:Panel>
<s:RichText width="700">
<s:br></s:br>
<s:p fontWeight="bold">The problem:</s:p>
<s:p>Datatips for zero value data points appear on left side of bar (if data point is not the first point in series).</s:p>
<s:br></s:br>
<s:p fontWeight="bold">For example:</s:p>
<s:p>1) For "June", eee = 0, mouse over the left side of the bar to see a datatip for "eee". Not good.</s:p>
<s:br></s:br>
<s:p>2) For "July", eee = 0 and aaa = 1, can't see the datatip for "aaa", instead "eee" shows. Real bad.</s:p>
<s:br></s:br>
<s:p>3) For "Feb", aaa = 0, datatip for "aaa" (first point) does not show. This is good.</s:p>
<s:br></s:br>
<s:p>4) For "Mar", bbb = 0, datatip for "bbb" shows on the left side of the bar. Not good.</s:p>
<s:br></s:br>
<s:p fontWeight="bold">Challenge:</s:p>
<s:p>How can we hide/remove datatips for zero value data points?</s:p>
<s:br></s:br>
</s:RichText></s:Application>

FYI.
Still have the issue after upgrading to the latest Flex Builder 4.0.1 with SDK 4.1.0 build 16076.
Posted this as a bug in the Adobe Flex Bug and Issue Management system.     JIRA
http://bugs.adobe.com/jira/browse/FLEXDMV-2478
Which is a clone of a similar issue with Flex 3 ...
http://bugs.adobe.com/jira/browse/FLEXDMV-1984

Chart - problem with realize one of the function under CR XI

Post Author: mrowa
CA Forum: Charts and Graphs
Hello,
I have
problem with realize one of the function under CR XI. I would be persuade if
any of us would like to help me.
1)
1) From
database (basically from one table), I take data to make report. Each of record
have appropriate fields:
dteData
intYear
intMonth
intDate
2)
2) I
want to realized comparison data from two or more periods of time on one chart
and in one table. For easily explanation I will describe problem on two
periods.For instance, user want to display and compare
on chart date (type monthly -sum data of each month) from 2007.02 u2013 2007.05
with date from 2006.03 u2013 2006.06. So we compare month 2007.02 with 2006.03;
2007.03 with 2006.04; 2007.04 with 2006.05; 2007.05 with 2006.06
On char I would like to display bars with comparison
of months.
Problem is that I donu2019t know how to write
something similar. I can use one period without any problems, but two and mores
I canu2019t realized.
Detail description:
I passed
two parameters two report:
{?from}, {?to} u2013for first period
{?offset}, it means {?from}+{?offset},
{?to}+{?offset} - for second period
On axis Y I have Sum(intDate);On
X (year + month). But on each value x( example 20007.02) I need to have
two values (bars). Value for standard period and offset.
For example for x=2007.02, I need
two bars one equal 2007.02 and second with offset u2013 2006.03
Movement to next value (bar) is
persuade by fields {data.rok}&{data.month} first or second period. This is
combination of two elements year&month defined under Formula. Problem
persist in that both period has different year.month and here problem starts once
again. I donu2019t know how to solve it. I have found out one solution but it
limits user only for two periods (I want to compare more).
My idea for compare only two
periods:
I make one query in CR for one
period and second query for second period.
Firs query:
"SELECT
       year ,
      month
Second query
"SELECT
       year + FLOOR({month + offset} % 13),
      {month + offset} % 13
Then in CR I connect two periods and
make u201Ctableu201D (results of queries) with JOIN on fields year and month.
This solution is not functional,
because I need to make reports for days and hours as well. In this solution I
canu2019t use (%31), because not all months has 31 days.
I use CR in WEB app made in Visual
Studio 2005. Maybe from aspx we can manipulate with date to get exact solution,
and solve problem with SELECT.
Hope my description clearly
describe problem and someone will be able to help me. I would be thankful.

I have had similar problem before.
Because I had too many data, the legend would not display all the data. Also the chart would not display all the data. But I was able to find a work around.
In your case, Right click on the Legend text and click on Format Legend Entry.
Change the font of the legend to 4 (which is the minimum). This may work.
If you are also having problem with data labels, you could change the font size of the data labels.
Hope this helps.
Thank you.

Bubble Chart with legend changes axis dimensions according to labels length

I have a Bubble Chart with legend on the right. Data are by series and the series are set dynamically with a drop down combo which replace the content of each series from time to time. Every time the series changes, also the name of the series changes and the legend on the right shows the new series names. The problem is that also the x axis dimension changes according to the new labels size, so the bubble chart changes its axis width in relation to the labels length in the legend. Is its possible to make somehow the bubble chart axis of a fixed lenght?
Xcelsius 2008, SP4, Windows XP
Thanks in advance

Hi Matt,
I just got a chance to try out your suggestions, and the
chart that is right in the main application renders the labels
fine, but the exact same code loaded in as a module doesn't. And it
never does, not even if the scale changes. Do you know why that
would be?
Mukul

Pie Chart with Legend

Hey Experts,
I have a small issue but cannot seem to find the solution. I have a pie chart with legends which I want to show side by side (horizontally). First pie chart and then legends. My requirement is that when the window is resized, the pie chart should also resize. I am able to show the chart and legends horizontally but when the legends list is long, the pie chart is always aligned in the center vertically. I tried setting all properties such as verticalAlign = "top", verticalCenter = "false", tried putting pie chart and legends in a separate VBox but nothing seems to work. Below is the code snippet.
I believe others would have faced this problem. Can someone help?
<mx:HBox width="100%" height="100%" verticalAlign="top" verticalCenter="false">
     <mx:VBox width="100%" verticalAlign="top" verticalCenter="false">
          <mx:PieChart id="pieChart" width="100%" height="100%" showDataTips="true" minWidth="200" minHeight="200" verticalCenter="false"/>
     </mx:VBox>
     <mx:VBox width="100%" verticalAlign="top" verticalCenter="false">
          <mx:Legend width="100%" height="100%" dataProvider="{pieChart}"/>
     </mx:VBox>
</mx:HBox>

Hi Dajji,
Here is the code which resolves the problem...
Note: In the code below I have removed the percentage width and height for PieChart.....that resolves the problem.....but the thing here is as you resize
your browser window the piechart width and height will not change accordingly...? Do you need PieChart to change its dimensions as your browser window
resizes...???
However if you specify width="100%" and height="100%" for PieChart you never gonna acheive the PieChart to be vertically alined to top.....why because
as you specified width="100%" and height="100%" for PieChart it occupies the total dimensions of the VBox but the actual visible portion dimensions are
less... because within the VBox you also have the legends so Flex will assign the sizes proportionately....for PieChart and Legends..
Hope you got my point...So you should remove the width="100%" and height="100%" for PieChart then you can acheive what you needed...
<?xml version="1.0"?>

<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" height="100%" width="100%">
    <mx:Script>
        <![CDATA[
        import mx.collections.ArrayCollection;
        [Bindable]
        private var medalsAC:ArrayCollection = new ArrayCollection( [
            { Country: "USA", Gold: 35, Silver:39, Bronze: 29 },
            { Country: "China", Gold: 32, Silver:17, Bronze: 14 },
            { Country: "Russia", Gold: 27, Silver:27, Bronze: 38 },
            { Country: "USA", Gold: 35, Silver:39, Bronze: 29 },
            { Country: "China", Gold: 32, Silver:17, Bronze: 14 },
            { Country: "Russia", Gold: 27, Silver:27, Bronze: 38 },
            { Country: "USA", Gold: 35, Silver:39, Bronze: 29 },
            { Country: "China", Gold: 32, Silver:17, Bronze: 14 },
            { Country: "Russia", Gold: 27, Silver:27, Bronze: 38 },
            { Country: "USA", Gold: 35, Silver:39, Bronze: 29 },
            { Country: "China", Gold: 32, Silver:17, Bronze: 14 },
            { Country: "Russia", Gold: 27, Silver:27, Bronze: 38 },
            { Country: "USA", Gold: 35, Silver:39, Bronze: 29 },
            { Country: "China", Gold: 32, Silver:17, Bronze: 14 },
            { Country: "Russia", Gold: 27, Silver:27, Bronze: 38 },
            { Country: "USA", Gold: 35, Silver:39, Bronze: 29 },
            { Country: "China", Gold: 32, Silver:17, Bronze: 14 },
            { Country: "Russia", Gold: 27, Silver:27, Bronze: 38 },
            { Country: "USA", Gold: 35, Silver:39, Bronze: 29 },
            { Country: "China", Gold: 32, Silver:17, Bronze: 14 },
            { Country: "Russia", Gold: 27, Silver:27, Bronze: 38 },
            { Country: "USA", Gold: 35, Silver:39, Bronze: 29 },
            { Country: "China", Gold: 32, Silver:17, Bronze: 14 },
            { Country: "Russia", Gold: 27, Silver:27, Bronze: 38 },
            { Country: "USA", Gold: 35, Silver:39, Bronze: 29 },
            { Country: "China", Gold: 32, Silver:17, Bronze: 14 },
            { Country: "Russia", Gold: 27, Silver:27, Bronze: 38 },
            { Country: "USA", Gold: 35, Silver:39, Bronze: 29 },
            { Country: "China", Gold: 32, Silver:17, Bronze: 14 },
            { Country: "Russia", Gold: 27, Silver:27, Bronze: 38 },
            { Country: "USA", Gold: 35, Silver:39, Bronze: 29 },
            { Country: "China", Gold: 32, Silver:17, Bronze: 14 },
            { Country: "Russia", Gold: 27, Silver:27, Bronze: 38 },
            { Country: "USA", Gold: 35, Silver:39, Bronze: 29 },
            { Country: "China", Gold: 32, Silver:17, Bronze: 14 },
            { Country: "Russia", Gold: 27, Silver:27, Bronze: 38 },
            { Country: "USA", Gold: 35, Silver:39, Bronze: 29 },
            { Country: "China", Gold: 32, Silver:17, Bronze: 14 },
            { Country: "Russia", Gold: 27, Silver:27, Bronze: 38 },
            { Country: "USA", Gold: 35, Silver:39, Bronze: 29 },
            { Country: "China", Gold: 32, Silver:17, Bronze: 14 },
            { Country: "Russia", Gold: 27, Silver:27, Bronze: 38 },
            { Country: "USA", Gold: 35, Silver:39, Bronze: 29 },
            { Country: "China", Gold: 32, Silver:17, Bronze: 14 },
            { Country: "Russia", Gold: 27, Silver:27, Bronze: 38 },
            { Country: "USA", Gold: 35, Silver:39, Bronze: 29 },
            { Country: "China", Gold: 32, Silver:17, Bronze: 14 },
            { Country: "Russia", Gold: 27, Silver:27, Bronze: 38 },
            { Country: "USA", Gold: 35, Silver:39, Bronze: 29 },
            { Country: "China", Gold: 32, Silver:17, Bronze: 14 },
            { Country: "Russia", Gold: 27, Silver:27, Bronze: 38 },
            { Country: "USA", Gold: 35, Silver:39, Bronze: 29 },
            { Country: "China", Gold: 32, Silver:17, Bronze: 14 },
            { Country: "Russia", Gold: 27, Silver:27, Bronze: 38 },
            { Country: "USA", Gold: 35, Silver:39, Bronze: 29 },
            { Country: "China", Gold: 32, Silver:17, Bronze: 14 },
            { Country: "Russia", Gold: 27, Silver:27, Bronze: 38 },
            { Country: "USA", Gold: 35, Silver:39, Bronze: 29 },
            { Country: "China", Gold: 32, Silver:17, Bronze: 14 },
            { Country: "Russia", Gold: 27, Silver:27, Bronze: 38 } ]);
        private function displayGold(data:Object, field:String, index:Number, percentValue:Number):String {
            var temp:String= (" " + percentValue).substr(0,6);
            return data.Country + ": " + '\n' + "Total Gold: " + data.Gold + '\n' + temp + "%";
        ]]>
    </mx:Script>
    <mx:Panel title="Olympics 2004 Medals Tally Panel" height="100%" width="100%" layout="horizontal" verticalAlign="top">
           <mx:VBox verticalAlign="top" height="100%" width="100%">
             <mx:PieChart id="chart"
                 showDataTips="true"
                 dataProvider="{medalsAC}">
                 <mx:series>
                     <mx:PieSeries
                         nameField="Country"
                         field="Gold"
                         labelFunction="displayGold">
                     </mx:PieSeries>
                 </mx:series>
             </mx:PieChart>
           </mx:VBox>
         <mx:Legend dataProvider="{chart}"/>
    </mx:Panel>
</mx:Application>
Thanks,
Bhasker Chari

Problem with one game

I have a problem with the league
of legend, after theirs update the game just die(only in win10) , no
work anymore, go
only 5-6 seconds and stops.
what can i do?

Christian
If it only happens in their game it is their problem. They need to make it compatible with win 10 not the other way around.
If you would care to investigate it upload your event viewer logs. If not I suggest you contact them again
Please provide us with your Event Viewer administrative logs by following these steps:
Click Start Menu
Type eventvwr into Search programs and files (do not hit enter)
Right click eventvwr.exe and click Run as administrator
Expand Custom Views
Click Administrative Events
Right click Administrative Events
Save all Events in Custom View As...
Save them in a folder where you will remember which folder and save as Errors.evtx
Go to where you saved Errors.evtx
Right click Errors.evtx -> send to -> compressed (zipped) folder
Upload the .zip file to Onedrive or a file sharing service and put a link to it in your next post
If you have updated to win 8.1 and you get the error message "the system cannot find the file specified" it is a known problem.
The work around is to edit the registry. If you are not comfortable doing this DONT. If you are, backup the key before you do
Press Win+"R" and input regedit
Navigate to:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WINEVT\Channels. Delete "Microsoft-Windows-DxpTaskRingtone/Analytic"
Wanikiya and Dyami--Team Zigzag

Problem with Legend

Similar Messages

Maybe you are looking for