Problem with Linux executable in solaris

Hello
I have a problem. We have sunblade workstation with OS solaris 2.8 version. I have downloaded a program which is developed under RedHat 5.1 and complied with Egcs-1.0.2. when i execute this program i am getting the message like bash: ./Al: cannot execute binary file
I would be thankfull if someone tell me how to solve the problem.
Thanks Raji

You need lxrun do be able to run Linux binaries on Solaris x86. You can get it at
http://soldc.sun.com/freeware/details/detail_lxrun_0.9.6.1_8_Intel.html
I've never used it, so please post your results here.

Similar Messages

HEAVY Problems with Linux x86_64 on K8T Neo

Hello, Community!
I experience *HEAVY* Problems with Linux on my MSI K8T Neo (FSR). Since the customer support of the german dependancy seems to ignore my call for help I'm in good hope that maybe you can help me out or give me some useful advise.
First some Hardware Specs of my system:
MSI K8T Neo FSR, Rev 1.1, BIOS 1.5
AMD Athlon 64 3000+
3x 512MB Kingston DDR400
Enermax EG365P-VE (350W) PSU (3.3V/5V 185W Combinded)
MSI GeForce FX5200 TDR 128
Adaptec ATA RAID AAR1200A (HPT370A) in PCI Slot 3
Hauppauge WinTV PCI in PCI Slot 5
Maxtor 4K040H2 (40GB) as Primary Master
JLMS XJ-HD166S DVD-ROM as Primary Slave
LiteOn LDW-411S DVD+/-RW as Secondary Master
LiteOn LTR-52327S CD-RW as Secondary Slave
2x Maxtor 6Y060L0 (60GB) on HPT370A as Primary Master/Slave
Seagate ST380020A (80GB) on HPT370A as Secondary Master
Maxtor 32049U3 on HPT370A as Secondary Slave
KeyTronic KT2001 USB Keyboard
Microsoft Optical Wheel Mouse Blue USB
I've downloaded Fedora Core 1 x86_64 as well as the lately released Fedora Core 2 test 3 x86_64 distribution. Both CD sets have been burnt ok.
If I try to install Core 1 x86_64 (Kernel 2.4.22-1.2179) the kernel crashes with a "attempted to kill idle task" panic. As far as I've learned the workaround is to give idle=poll as kernel parameter. This resolves the kernel panic, but the installer randomly crashes with segfaults at a random stage; sometimes while loading anaconda, sometimes during package install.
If I try to install Core2 test 3 x86_64 (Kernel 2.6.5) I get a, completely new, error message while the kernel does the PCI Scan:
******* Your BIOS seems to not contain a fix for K8 errata #93
******* Working around it, but it may cause SEGVs or burn power
******* Please consider a BIOS update
******* Disabling USB legacy in the BIOS may also help
I removed my USB keyboard, connected a PS/2 keyboard, disabled to USB Legacy option (I need it enabled in order to use Ghost) in the BIOS and booted again.
The error message is gone now, but as in Core 1 the installer still crashes randomly with segfaults. I'm still unable to go all the way through the installation routine.
I even tried to install Fedora Core 1 "i386": again there are segfaults during install.
Contrary to the problems I experience while trying to install Linux my Windows XP (32-Bit), as well as a test installation of Windows XP 64-Bit, run like a charm without any problems. Strange but true.
Since I already read trough several posts in this forum I already tried running my system with memory sticks from another manufacturers as well as with a more powerful PSU. I even removed my tv-card and raid-controller.
Nogo - Linux still crashes randomly and Windows still works without any flaws.
Has anyone a clue what I can/must do to successfully install Linux?
Might it be that the BIOS has some flaws that might cause the problems?
Has anyone managed to install Linux (what distribution) on this Mainboard?
I would greatly appreciate any help. If you need to know something I haven't provided here please feel free to ask. I'll answer ASAP.
Thank you in advance.
P.S.: The system is *NOT* overclocked in any way.

And now even the last problem is solved ...
Since I was successful in installing a basic Gentoo system but still failed to install Fedora I reflashed BIOS 1.5. This time I cleared the CMOS by unplugging the PSU, setting the jumper and removing the backup battery.
Yesterday I only flashed it with the /a switch, which should have cleared the CMOS as well - so far for the theory. However, it once went fine as I upgraded from BIOS 1.1 to 1.4.
After setting up the BIOS options again I gave it another try and booted from Fedora (Core 2 test 3) install CD: No more complains about the CPU errata, although USB legacy is enabled, and I even went through the installation without any problems.
It seems as I will stick with Gentoo as my primary distribution since the kernel makes a more "mature" impression than the one from Fedora (i.e. the K8 PowerNOW! Driver seems to be missing in Fedora's Kernel 2.6.5).
By using an spare Athlon XP Mainboard I worked out that only one of my three Kingston memory sticks had errors - I'm going to replace the faulty stick tomorrow.
Now for the conclusio:
Thanks, especially you JLP, for helping me with my issue. Without the advise to use Gentoo, and the included MemTest86, I wouldn't have been able to track down the error to a faulty memory stick that fast since Windows always ran fine.

Problem with cl_gui_frontend_services execute method

Halo experts ,
I am facing a peculiar problem with cl_gui_frontend_services execute .
I am trying to open documents using the method execute of cl_gui_frontend_services
. But the problem is it is not opening file with space in its name .
ie it is able to open 'for_example.pdf' but not 'for example.pdf'
Any one has idea why it is happening?
Regards
Arshad

HI Arshad...
This does not seems to be a problem of GUI...
bad parameter exceptions is coming ... mean you are passing an incorrect parameter ...mean incorrect file name ...or the filename you are passing does not exits in you my documents folder ...
I have executed the same code ... and it is perfectly working fine ... you have to pass the file name exactly ... that means if
you are passing L11527110.pdf then the file name should be L11527110.pdf...
if you are passing the parameter as L 11527110.pdf (* with space ) then the file name has to be exactly same ... other wise ...
the application ACRORD32.EXE opens but gives as error ...
please check the file name in my docs and passing parameter value ....
I am giving my code which i did .....
CALL METHOD cl_gui_frontend_services=>execute
EXPORTING
application ='ACRORD32.EXE'
parameter = 'B CDWBDIC.pdf'
default_directory = 'C:\Documents and Settings\Ritamadmin\My Documents\'
maximized = 'X'
operation = 'OPEN'
EXCEPTIONS
cntl_error = 1
error_no_gui = 2
bad_parameter = 3
file_not_found = 4
path_not_found = 5
file_extension_unknown = 6
error_execute_failed = 7
synchronous_failed = 8
not_supported_by_gui = 9
OTHERS = 10.

Problem with JNI in a Solaris shared library

Hi,
I have a problem.
I have used JNI in my .dll on Windows & .so on Solaris . I have also used the same JNI code in a .exe on Windows & an executable on Solaris. 3 out of the above 4 combinations work & 1 doesen't. When I use JNI from a .so on Solaris 8(with/without the J2SE recommended patch), the JVM seems to have some exception & dumps core when I invoke CreateJavaVM(). See Below - I've included the output on the screen & the output from 'pstack core' :
Unexpected Signal : 11 occurred at PC=0xFED29D44
Function=[Unknown. Nearest: JVM_GetMethodIxExceptionIndexes+0x1994]
Library=/usr/java/jre/lib/sparc/libjvm.so
Current Java thread:
Dynamic libraries:
0x10000 SblSim
0xff280000 /usr/lib/libnsl.so.1
0xfec00000 /usr/java/jre/lib/sparc/libjvm.so
0xff370000 /usr/lib/libpthread.so.1
0xff350000 /usr/lib/librt.so.1
0xff260000 /usr/lib/libsocket.so.1
0xff390000 /usr/lib/libdl.so.1
0xff230000 /usr/lib/libCrun.so.1
0xff200000 /usr/lib/libm.so.1
0xff340000 /usr/lib/libw.so.1
0xff1b0000 /usr/lib/libthread.so.1
0xff080000 /usr/lib/libc.so.1
0xff180000 /usr/lib/libmp.so.2
0xff160000 /usr/lib/libaio.so.1
0xff1f0000 /usr/platform/SUNW,Sun-Blade-1000/lib/libc_psr.so.1
0xfebd0000 /usr/j2se/jre/lib/sparc/native_threads/libhpi.so
0xfeba0000 /usr/j2se/jre/lib/sparc/libverify.so
0xfeb60000 /usr/j2se/jre/lib/sparc/libjava.so
0xfeb40000 /usr/j2se/jre/lib/sparc/libzip.so
0xfe920000 /usr/lib/locale/en_US.ISO8859-1/en_US.ISO8859-1.so.2
0xf1400000 ./libaicd.so
0xfc480000 ./libmttoolkit.so
0xfdfe0000 ./libmttlogger.so
0xfdfb0000 /usr/j2se/jre/lib/sparc/libnet.so
Local Time = Tue Nov 12 09:51:37 2002
Elapsed Time = 29
# HotSpot Virtual Machine Error : 11
# Error ID : 4F530E43505002D5 01
# Please report this error at
# http://java.sun.com/cgi-bin/bugreport.cgi
# Java VM: Java HotSpot(TM) Client VM (1.4.0_01-b03 mixed mode)
# An error report file has been saved as hs_err_pid3120.log.
# Please refer to the file for further information.
Abort(coredump)
Below is the output of 'pstack core'
$ pstack core
core 'core' of 3120: SblSim libaicd.so 127.0.0.1 9999
----------------- lwp# 1 / thread# 1 --------------------
ff1c9764 __sigprocmask (ff1cbf60, 0, 0, 565f8, ff1de000, 0) + 8
ff1be110 _sigon   (565f8, ff1e5930, 6, ffbedba4, 565f8, 6) + d0
ff1c1150 thrpkill (0, 1, 6, ff1de000, 1, ff140450) + f8
ff0cb900 raise (6, 0, 0, ffffffff, ff1403bc, 4) + 40
ff0b58ec abort (ff13c000, ffbedcf8, 0, fffffff8, 4, ffbedd19) + 100
feee2700 ???????? (1, fef98e50, ffbedd98, 0, feffc130, feee1258)
feee12c8 ???????? (60650, b, fed29d44, ffbeeab8, b, 0)
fede77c0 ???????? (fed29d44, ffbeeab8, ffbee800, fed29d44, fed03744, 0)
ff1cb824 __sighndlr (b, ffbeeab8, ffbee800, fede6f38, 5669c, 5668c) + c
ff1c84d8 sigacthandler (b, 565f8, 0, 0, 0, ff1de000) + 708
--- called from signal handler with signal 11 (SIGSEGV) ---
fed29d44 ???????? (0, 60650, 0, 0, 0, 0)
fed2d7d4 ???????? (606e4, 0, 0, ffbeed00, 0, 0)
f172e818 __1cHJNIEnv_JNewObject6MpnH_jclass_pnK_jmethodID_E_pnI_jobject__ (606e4, 0, 0, ffbeed70, 39, 107f90) + 70
f172dbf8 __1cGJEvent2t5B6M_v_ (107f60, f1a877f4, db088, ff0c1c44, 107f48, 0) + 80
f16f2864 __1cGCEvent2t6Mii_v_ (107f60, 0, 1, ff13c000, 107f48, 0) + 7c
f16e62e8 __1cVCISCHelperThreadMutex2t6M_v_ (107f50, 0, 560ac, 30f68, fefe4000, 0) + c0
f16ddc34 __1cLinitGlobals6F_v_ (0, 1, 19a, f1a198ec, f1a198ec, 0) + 5c
f16de4e4 CreateISCDriverInstance (0, 5cc40, 0, 57608, 565e8, 0) + 554
00034f08 __1cJRunSblSim6F_v_ (1, ffbef322, ffbef32c, ff13fc70, 100d4, 0) + 320
00035588 main (4, ffbef1dc, ffbef1f0, 55c00, 0, 0) + 1a8
00018460 _start   (0, 0, 0, 0, 0, 0) + 108
----------------- lwp# 2 / thread# 2 --------------------
ff11e958 _signotifywait (ff1de000, 59, 0, 0, 0, 0) + 8
ff1c2030 thr_yield (0, 0, 0, 0, 0, 0) + 8c
----------------- lwp# 3 --------------------------------
ff1c9774 private___lwp_cond_wait (ff075d70, ff1ded9c, ff1de000, 0, 0, 4) + 8
ff11c554 doorreturn (ff075cb0, ff1ba740, 0, 0, 0, 0) + 68
----------------- lwp# 4 / thread# 4 --------------------
ff11efbc ___lwp_cond_wait (60048, 60030, fe901ad0, 0, 0, fe901ac8) + 8
ff116610 lwpcond_timedwait (1cb8c88, 3dd1157a, fe901ba4, 60030, 60048, 1) + 98
fecfc7d8 ???????? (0, 1, 0, 581b8, feffa26c, 0)
fecfcfd4 ???????? (ff00a15c, feffa4b8, feffa4b4, 0, 0, 0)
fecfccc0 ???????? (d3980, 0, 0, 0, 0, 0)
fecfcbd0 ???????? (d3980, ff1df688, 1, 1, ff1de000, 0)
ff1cb728 threadstart (d3980, 0, 0, 0, 0, 0) + 40
----------------- lwp# 5 --------------------------------
ff11c4fc doorreturn (4, ff1df688, ff1df6a0, 3, ff1de000, 1) + 10
ff1ba740 lwpstart (fea95d70, 0, 6000, ff075b74, 0, 0) + 18
ff1c2030 thr_yield (0, 0, 0, 0, 0, 0) + 8c
----------------- lwp# 6 / thread# 5 --------------------
ff11efbc ___lwp_cond_wait (d5720, d5708, 0, fed10a40, 0, 0) + 8
fed110d4 ???????? (d56c8, 0, 5000, 5210, d4d38, 4d24)
fed10824 ???????? (fdf8172c, 0, 0, d4d38, d4d38, 30dec8)
fed103b0 ???????? (d4dcc, fdf81824, 0, 0, 0, 0)
fa40cc94 ???????? (f2000380, b6, fdf818a4, ffffffff, 0, fdf817c0)
fa405da0 ???????? (f2000380, b6, fdf818a8, fa415444, 0, fdf81840)
fa405da0 ???????? (fdf81938, 0, 0, fa4157a4, 2f4210, fdf818d8)
fa400438 ???????? (fdf819c0, fdf81c08, a, f6050b68, fa40bc8c, fdf81b50)
fecfe2f8 ???????? (fdf81c00, fdf81a88, fdf81b48, d4d38, d4d38, fdf81a9c)
fed0ff90 ???????? (fefe4000, d5298, fdf81b3c, fdf81b38, fdf81b48, d4d38)
fed0fdf0 ???????? (fdf81c00, fdf81bfc, fdf81bf0, fdf81be8, fdf81be0, d4d38)
fed0fd78 ???????? (d4d38, d4d38, ac9a0, d5298, 2d4488, fed0fa60)
fed0fa88 ???????? (d4d38, 0, 0, 0, 0, 0)
fecfcbd0 ???????? (d4d38, ff1df688, 1, 1, ff1de000, 0)
ff1cb728 threadstart (d4d38, 0, 0, 0, 0, 0) + 40
----------------- lwp# 7 / thread# 6 --------------------
ff11efbc ___lwp_cond_wait (d7040, d7028, 0, 1, 0, 0) + 8
fed110d4 ???????? (d6fe8, 0, 5000, 5210, d6658, 4d24)
fed10824 ???????? (fa38169c, 0, 0, d6658, d6658, 30dec8)
fed103b0 ???????? (d66ec, fa38179c, 0, 0, 0, 0)
fa40cc94 ???????? (f2000490, b6, fa3817a0, fa414050, 0, fa381730)
fa405da0 ???????? (f2000478, b6, fa3818b4, fa415444, 0, fa3817d8)
fa405c4c ???????? (f2000478, b6, fa381934, fa415444, d6658, fa381858)
fa405c4c ???????? (fa381938, 0, 0, fa38197c, 2f4210, fa3818d8)
fa400438 ???????? (fa3819c0, fa381c08, a, f60520b8, fa40bc8c, fa381b50)
fecfe2f8 ???????? (fa381c00, fa381a88, fa381b48, d6658, d6658, fa381a9c)
fed0ff90 ???????? (fefe4000, d6bb8, fa381b3c, fa381b38, fa381b48, d6658)
fed0fdf0 ???????? (fa381c00, fa381bfc, fa381bf0, fa381be8, fa381be0, d6658)
fed0fd78 ???????? (d6658, d6658, ac9e0, d6bb8, 2d4488, fed0fa60)
fed0fa88 ???????? (d6658, 0, 0, 0, 0, 0)
fecfcbd0 ???????? (d6658, ff1df688, 1, 1, ff1de000, 0)
ff1cb728 threadstart (d6658, 0, 0, 0, 0, 0) + 40
----------------- lwp# 8 / thread# 7 --------------------
ff11d194 _poll    (0, 0, 0, fa281a28, ff13f1b4, fa281a28) + 8
ff1cb134 select (0, a, 0, ff1de000, fa281e14, 0) + 34
fed32afc ???????? (d8040, 0, a, 0, 0, 0)
fed328b4 ???????? (d8040, 0, 0, 0, 0, 0)
fecfcbd0 ???????? (d8040, ff1df688, 1, 1, ff1de000, 0)
ff1cb728 threadstart (d8040, 0, 0, 0, 0, 0) + 40
----------------- lwp# 9 / thread# 8 --------------------
ff11efbc ___lwp_cond_wait (5f998, 5f980, 2e7aa0, ff1de000, fa181e14, 0) + 8
fecfc634 ???????? (5f950, 0, 0, 0, feffa26c, 0)
fed3371c ???????? (3c00, 3f44, 0, 0, 0, 0)
fecfcbd0 ???????? (d81a8, ff1df688, 1, 1, ff1de000, 0)
ff1cb728 threadstart (d81a8, 0, 0, 0, 0, 0) + 40
----------------- lwp# 10 / thread# 9 --------------------
ff11f008 lwpsema_wait (f1f81e30, ff1de000, 0, f1f81d70, ff3e2628, 0) + c
ff1b94c0 _swtch   (f1f81d70, ffffffff, ff1de000, 5, 1000, 0) + 158
ff1bcc64 sema_wait (ff020fe0, ff1e98e4, 5000, 10000, 534d, 1) + bc
fed345c8 ???????? (0, 6, b, a, 1, 0)
fed34254 ???????? (ff002ae4, ff00a5a0, ff00a5d4, dab90, 2d4488, fed0fa60)
fed0fa88 ???????? (da630, 0, 0, 0, 0, 0)
fecfcbd0 ???????? (da630, ff1df688, 1, 1, ff1de000, 0)
ff1cb728 threadstart (da630, 0, 0, 0, 0, 0) + 40
----------------- lwp# 11 / thread# 10 --------------------
ff11efbc ___lwp_cond_wait (604e8, 604d0, 2e7aa0, feffa26c, 106c40, 0) + 8
fecfc88c ???????? (604a0, 0, 0, dbbd0, feffa26c, 0)
fed349ac ???????? (db670, db670, dbfd0, dbbd0, 2d4488, fed0fa60)
fed0fa88 ???????? (db670, 0, 0, 0, 0, 0)
fecfcbd0 ???????? (db670, ff1df688, 1, 1, ff1de000, 0)
ff1cb728 threadstart (db670, 0, 0, 0, 0, 0) + 40
-------------------------- thread# 3 --------------------
ff1bddbc reapwait (ff1e29e0, 20520, 0, ff1de000, 0, 0) + 38
ff1bdb14 _reaper (ff1dee30, ff1e4740, ff1e29e0, ff1dee08, 1, fe400000) + 38
ff1cb728 threadstart (0, 0, 0, 0, 0, 0) + 40

This is an update to the original message -
I have tried both HotSpot & Server JVMs but still see the
same behavior. I'm using 1.4 .
I'd like to provide more information to those who can help
me. I have a feeling there might be something wrong in my
CC options. Thus you will find below what my CC statement
looks like for one of the files in my project & for the
linking of the final shared library. I also have
provided the output of ldd on my shared library libaicd.so
& for comparison the output of ldd on libjvm.so as that
might provide some usefull information just incase
something looks suspecious & might ring a bell.
/opt/SUNWspro.cc6/bin/CC -c -KPIC -g -DDEBUG=DEBUG -
D_DEBUG -mt -DSOLARIS -DSTD_STREAM -
I/vob1/qwsrc/fw/include -I.-I/vob4/source/idl -
I/vob4/source/mttoolkit -I/vob4/source/mttoolkit/tools -
I/vob4/source/integrations/siebel/aicd -
I/vob4/source/include -I/vob1/qwsrc/fw/include -
I/vob4/source/source -I/vob4/source/mttoolkit -
I/vob1/external/platform_neutral/siebel/scapi/include -
I/external/sparc/Sun/jdk/1.3.1/include -
I/external/sparc/Sun/jdk/1.3.1/include/solaris -
I/vob4/source/idl -I/vob4/source/mttoolkit -
I/vob4/source/mttoolkit/tools -
I/vob4/source/mttoolkit/vnet -
I/vob4/source/mttoolkit/bool -DUNIX -
D_USE_MTTServerToolkit -D_JAVA_ WIAcceptTimeOut.cpp -
o /space/users/janak/buildoutput/sparc/debug/obj/integratio s/siebel/aicd/WIAcceptTimeOut.o
/opt/SUNWspro.cc6/bin/CC -G -
o /space/users/janak/buildoutput/sparc/debug/lib/fw/libaicd.so
/space/us
ers/janak/buildoutput/sparc/debug/obj/integrations/siebel/ai
cd/AgentService.o /space/users/janak/buildoutput/sparc/debug
/obj/integrations/siebel/aicd/AgentServiceCmds.o /space/user
s/janak/buildoutput/sparc/debug/obj/integrations/siebel/aicd
/AgentServiceEvents.o /space/users/janak/buildoutput/sparc/d
ebug/obj/integrations/siebel/aicd/AgentServiceICAReq.o /spac
e/users/janak/buildoutput/sparc/debug/obj/integrations/siebe
l/aicd/AgentServiceICEvents.o /space/users/janak/buildoutput
/sparc/debug/obj/integrations/siebel/aicd/AgentServiceUtilit
ies.o /space/users/janak/buildoutput/sparc/debug/obj/integra
tions/siebel/aicd/AvMc.o /space/users/janak/buildoutput/spar
c/debug/obj/integrations/siebel/aicd/InternationalStrings.o
/space/users/janak/buildoutput/sparc/debug/obj/integrations/
siebel/aicd/JEvent.o /space/users/janak/buildoutput/sparc/de
bug/obj/integrations/siebel/aicd/JMultipleEvents.o /space/us
ers/janak/buildoutput/sparc/debug/obj/integrations/siebel/ai
cd/JNIObject.o /space/users/janak/buildoutput/sparc/debug/ob
j/integrations/siebel/aicd/JObject.o /space/users/janak/buil
doutput/sparc/debug/obj/integrations/siebel/aicd/JSemaphore.
o /space/users/janak/buildoutput/sparc/debug/obj/integration
s/siebel/aicd/JWorkerThread.o /space/users/janak/buildoutput
/sparc/debug/obj/integrations/siebel/aicd/MultipleEvents.o /
space/users/janak/buildoutput/sparc/debug/obj/integrations/s
iebel/aicd/Param.o /space/users/janak/buildoutput/sparc/debu
g/obj/integrations/siebel/aicd/ParamQueue.o /space/users/jan
ak/buildoutput/sparc/debug/obj/integrations/siebel/aicd/RefC
ount.o /space/users/janak/buildoutput/sparc/debug/obj/integr
ations/siebel/aicd/SiebelDriver.o /space/users/janak/buildou
tput/sparc/debug/obj/integrations/siebel/aicd/SiebelEvent.o
/space/users/janak/buildoutput/sparc/debug/obj/integrations/
siebel/aicd/SiebelWorkItem.o /space/users/janak/buildoutput/
sparc/debug/obj/integrations/siebel/aicd/SingleEvent.o /spac
e/users/janak/buildoutput/sparc/debug/obj/integrations/siebe
l/aicd/SmartPtr.o /space/users/janak/buildoutput/sparc/debug
/obj/integrations/siebel/aicd/StdAfx.o /space/users/janak/bu
ildoutput/sparc/debug/obj/integrations/siebel/aicd/ThreadPoo
l.o /space/users/janak/buildoutput/sparc/debug/obj/integrati
ons/siebel/aicd/Utilities.o /space/users/janak/buildoutput/s
parc/debug/obj/integrations/siebel/aicd/WIAcceptTimeOut.o -
lnsl -lc -lCstd -
L/space/users/janak/buildoutput/sparc/debug/lib/cti -
lmttoolkit -
L/space/users/janak/buildoutput/sparc/debug/lib/fw -
lmttlogger -
L/space/users/janak/buildoutput/sparc/debug/lib/fw -
lqwlicmtt -
L/external/sparc/Sun/jdk/1.3.1/jre/lib/sparc/server -
Bdynamic -ljvm -mt -lpthread -lposix4
$ ldd /usr/j2se/jre/lib/sparc/libjvm.so
libCrun.so.1 => /usr/lib/libCrun.so.1
libdl.so.1 => /usr/lib/libdl.so.1
libthread.so.1 => /usr/lib/libthread.so.1
libsocket.so.1 => /usr/lib/libsocket.so.1
libnsl.so.1 => /usr/lib/libnsl.so.1
libm.so.1 => /usr/lib/libm.so.1
libw.so.1 => /usr/lib/libw.so.1
libc.so.1 => /usr/lib/libc.so.1
libmp.so.2 => /usr/lib/libmp.so.2
/usr/platform/SUNW,Sun-Blade-1000/lib/libc_psr.so.1
$ ldd libaicd.so
libnsl.so.1 => /usr/lib/libnsl.so.1
libc.so.1 => /usr/lib/libc.so.1
libmttoolkit.so => ./libmttoolkit.so
libmttlogger.so => ./libmttlogger.so
libjvm.so => /usr/java/jre/lib/sparc/libjvm.so
libpthread.so.1 => /usr/lib/libpthread.so.1
librt.so.1 => /usr/lib/librt.so.1
libdl.so.1 => /usr/lib/libdl.so.1
libmp.so.2 => /usr/lib/libmp.so.2
libCrun.so.1 => /usr/lib/libCrun.so.1
libthread.so.1 => /usr/lib/libthread.so.1
libsocket.so.1 => /usr/lib/libsocket.so.1
libm.so.1 => /usr/lib/libm.so.1
libaio.so.1 => /usr/lib/libaio.so.1
libw.so.1 => /usr/lib/libw.so.1
/usr/platform/SUNW,Sun-Blade-1000/lib/libc_psr.so.1

Problem with linux installation on Thinkpad T410i

Hello everyone. I have a problem with an installation of Linux (Debian). Installation ended in my Thinkpad T410i, but when you are starting, the computer constantly restarts. With windows does not happen. What's the problem?
Probe with two versions: one with and one without GUI, and always restarts during startup stage or just finish loading the operating system. If eligo Windows in GRUB, the pc works normally.
I appreciate any help you can give me.

Madhukar,
Check the below forums which also discuss about same problem like yours.
Trouble with SAP system installation GUI
error in installation of solution manager
Regards,
Debasis.

Problem with native ldapsearch in Solaris 10

Hi all,
someone could tell me please why native ldapsearch in Solaris 10 do not work with SSL connection when same command comes with Sun Directory Server 5.2 works perfectly ?
With native ldapsearch in Solaris 10, I get the error message "Can't contact LDAP server":
# /bin/ldapsearch -v -h ldapserver -p 636 -Z -P /var/ldap -b dc=exemple,dc=fr -s base objectclass=\*
ldap_init( ldapserver, 636 )
filter pattern: objectclass=*
returning: ALL
filter is: (objectclass=*)
ldap_search: Can't contact LDAP server
When, on the same host, on which Directory server is installed, there's no problem:
# /var/opt/mps/serverroot/shared/bin/ldapsearch -v -h ldapserver -p 636 -Z -P /var/ldap -b dc=exemple,dc=fr -s base objectclass=\*
ldap_init( exemple, 636 )
ldaptool_getcertpath -- /var/opt/mps/serverroot/alias
ldaptool_getkeypath -- /var/opt/mps/serverroot/alias
ldaptool_getdonglefilename -- (null)
filter pattern: objectclass=*
returning: ALL
filter is: (objectclass=*)
version: 1
dn: dc=exemple,dc=fr
nisDomain: exemple.fr
objectClass: top
objectClass: domain
objectClass: nisDomainObject
1 matches
What can I do to bind to ldap server with SSL connection from an ordinary work station?
Thank you in advance.
Dra

Hi :
"The /usr/bin/ldapsearch is an old version that does not support the "-Z" and "-P" flags to test SSL connection on port 636, use the ldapsearch command from SUN DS5.0/5.1 that comes bundled with Solaris9 and usually installed at /usr/iplanet/ds5 (DS5.0/5.1) or /var/Sun/mps (DS5.1/5.2) or /var/opt/mps/serverroot (DS5.2)"
Source : http://forums.sun.com/thread.jspa?threadID=5089467
Hope this can help,
Regards,
Groucho_fr

Problems with 8.1.7 Solaris/32bits

I tried to download the 8.1.7 for Sparc Solaris 32bits but when I called gzip it returned a message that it is not on gzip format. I downloaded again and the same message was reported by gzip. I compared the two files and no differences was encountered. Is there any problem with the image ?
File : 817solaris.cpio.gz
Browser : M$-Internet Explorer 5.0 on Window$ 2000
OS : SPARC Solaris 8
Thanks,
Daniel Vermes

Hans,
It is a known problem on Windows 98, Windows and Windows 2000 if you are using Intel Pentium 4 processor with Sun JRE and Symantec JIT. I had the same problem with Windows 98. Oracle has a patch. Please see Note:131299.1 on metalink for details.

Tecra S2: Problems with Linux Live CDs after BIOS upgrade

Hi all,
a short while ago I flashed the BIOS of my Tecra S2. My current BIOS version now is 2.80. Unfortunately no I have got problems with booting Linux Live CDs like Knoppix or Kanotix. The boot process freezes, when the PCMCIA module is tried bo be started.
What i want to do now is to downgrade my BIOS version. Does anyone know how that stuff works and does anyone have an old BIOS version from 2005? I couldn`t found older versions on the Toshiba support sites.
Thanks for all answers!
biberkopf

Youre right. On the Toshiba page you will find only the newest version of the BIOS and the older versions are not available on the page.
In my opinion if you want to downgrade the BIOS you have to ask the authorized service provider in your country for the help.
But did you check this useful site:
http://newsletter.toshiba-tro.de/main/
There you can check the area machine installation help
It provides some useful tips with the device configuration

Problem with Linux AS 2.1

Hi Guru's
I installed RHAS 2.1 it was installed successfully but it is not opening Gnome or KDE, it is opening only command prompt, i run startx command also even it is not
opening. what i will do please tell me
Regards

dear
first
to open file /etc/inittab
do this
chmod 777 /etc/initab
this change mode to full permissions (read-write even execute) for owner (root) group and others
second
ur hardware i think it compitable with linux as 2,1
third
as u said u enterd init5 command and it switches to init3 give me some time and i will told u files to check
bye now

Problems with installer/executable files

I created an installer with an executable file so I can run my program on another computer that does not have labview. I went ahead and installed all the drivers on the target computer and I installed 8.2.1 Runtime Engine as well as NI-VISA Runtime engine. My program tests circuit boards which are connected to the the various modules and the target computer will be used on the manufacturing floor allowing employees to test circuit boards but not being able to mess up my program which is why I figured the stand alone is the way to go. The main problem I am coming across right now is that when the DAQ modules arent even connected to the usb port of the computer the executable is still running and saying the test passed which is very bad in the case on the manufacturing floor because boards could be sent out that have failures. I dont understand why when the DAQ isnt hooked to the computer the exe still runs when I feel like it shouldnt. Is there some function I can put in my program to make sure there is a signal being sent to the computer whether it is connected or not?? The actual program wont run if its not connected because it does not detect the modules which is good. What also confuses me is that when the DAQ modules are connected to the developer computer and the executable runs the circuit board test fails, BUT if the DAQ modules are connected to the target computer and the executable runs the circuit board test passes like before when the modules arent even connected...it makes me think there is something else I need to install on the target computer...

What you have set up only detects unit under test errors. There could be logic/programming errors or external hardware errors. The subVIs are not working if there is no hardware. They are returning an error and the Boolean state of the read should be ignored. The subVIs will always return something, even if it's a default value.
Shown below is some of simple optiopns you have for error handling. Look through the shipping examples. You will see a lot in them as well.
Message Edited by Dennis Knutson on 04-08-2009 12:38 PM
Attachments:
Error Handling Options.PNG ‏6 KB

Problem with not executed include

Hi all,
I've a problem with my include in production system. Whole story looks like this. We have product from 3rd company so this is not z-namespace. There are some places in which we can add our own code - function module with not existing z-include. This FM is called with CALL FUNCTION statement, not CALL CUSTOMER-FUNCTION, so there are no CMOD entries to modify. I've created this include and implemented my functionality. Unfortunatelly my code in production is sometimes executed and sometimes not. What I've observed is that when include is not executed debugger steps over it (it goes in to FM but ignores include) and what is more funny I'm not able to set breakpoint in this include (I'm getting a message that ithis is not possible). 2 Minutes later everything works (I can set break point and include is executed) although I didn't do anything (no activation). I've transported once more all transports from development to production without any change. I didn't observe this behavior in development or test systems, but to be honest I didn't do so many tests to be sure that problem is only in production.
I suspect that there is something wrong with 3rd party product, but I'm not 100% sure. Did anyone has this kind of problem?
Best Regards
Marcin Cholewczuk

hi,
I've transported once more all transports from development to production without any change.
you could not activate debugger because . during transporting object from dev to prd all the object where not transported correctly . and some times the include which gets created has there namespace registered in repository objects , so when you re transported that request it corrected those entries .
regards
Deepak.

MSI FX 5700 Ultra problem with linux

Hi,
I know that linux are not officially suported by MSI VGA cards, but NVIDIA based VGA cards use to work under linux. I've got a problem with a recent purchase and until now I didn't found any answer.
Here is my problem, if anyone here have an idea :
I recently upgraded my video card Geforce 2 MX to a Geforce FX 5700 Ultra from MSI (FX 5700 Ultra TD128).
I've an Athlon XP 2000,
motherboard Gigabyte GA-7VAXP, 512 Mb,
distrib Mandrake 9.2
latest nvidia driver 5328
At startup after installation, Mandrake detected a new hardware, but it was not the right card name. The video test failed and X (graphic mode) didn't start.
Back to console mode, I discovered that even the console mode doesn't work properly : I have no cursor and the screen lines don't scroll up when the screen gets full (very hard to type commands or edit files).
I checked the XF86Config-4 : for me it seems ok. Actually, it didn't change from the previous card.
I've no errors in the XFree log (no lines with (EE)).
I went to the MSI site to look for a newer bios version, but there is'nt.
I tried both DVI and VGA connection with my LCD monitor, same thing.
I also tried running Knoppix (liveCD distrib), same prob.
I pasted below the message i've got on screen when I try to start X manually (this doesn't help much either) :
XIO: fatal IO error 104 (Connection reset by peer) on X server ":0.0"
after 0 requests (0 known processed) with 0 events remaining.
It seems to me that this graphic card simply doesn't work under linux.
Thanks a lot for any help.

To get X to work with your LCD during the installation process append nofb as one of the installation options.
I have a 17" LCD so you might like to compare the relevant sections in your XF86Config with these:
Section "Module"
   Load "dbe"
   Load "extmod"
   Load "fbdevhw"
   Load "glx"
Load "dri"
   Load "record"
   Load "freetype"
   Load "type1"
EndSection
(The Load "dri" gets removed prior to installing nvidia's Forceware drivers.)
Section "Monitor"
   Identifier "Monitor0"
   VendorName "Monitor Vendor"
   ModelName "CML174SX"
   DisplaySize 340   270
   HorizSync 24.0 - 80.0
   VertRefresh 56.0 - 75.0
   Option    "dpms"
EndSection

Runtime.exec() problem with Linux

Hi All,
I have a java program which I am using to launch java programs on all platforms.
I am using the Runtime.exec() method to start the process in a separate JVM.
But, I had a problem with the -classpath switch if the directories contained spaces. So I modified the java command which I am passing to the exec() method to something like:
java -classpath \"./my dir with spaces\" com.harshal.MainThis I had to do because of the problem in windows. But, if I use double quotes in Linux (for the classpath switch in my exec() method), it won't work.
Can anyone correct me so that I can use the Runtime.exec() method on all platforms to launch the java application even if the classpath directories contains spaces.
Thank you very much.

I was reading about the command line args on java's
tutorial and I found a shocking news. Mac OS doesn't
support command line args, That's news to me. Could you please elaborate ?
More important is: I got it working. I figured out I had forgotten to try something before, or, to be more correct, I made an error when trying malcommc's envp suggestion: I used "classpath" as key, not "CLASSPATH", as it should have been.
Ran a new test, got it working.
Sample:
Given a rootdir. Subdirectory "cp test" with a classfile (named "test") without package declaration. Running another class in another directory, using:
String[] cmd = new String[]{
"java", "test"
String[] envp = new String[]{
"CLASSPATH=rootdir:rootdir/cp test" // <-- without quotes.
Runtime.getRuntime().exec(cmd, envp);It's been my wrong all the time. I didn't check hard enough. It simply had to work somehow (that's the kind of things that's easy to say afterwards :-)).

Problems with make/gcc on Solaris

I'm working on building a binary on several different platforms, but the only one giving me trouble is Solaris 10 (64-bit -- though apparently this is building a 32-bit binary). The binary relies on the following project:
https://projects.coin-or.org/Cbc
I can checkout their code from SVN and build it without a problem. However, we then have a small cpp file that links to those libraries. I cannot get this cpp file to build. In fact, Solaris chokes on the makefile itself complaining that one of the lines ends with the '$' (which it does). The strange thing is, this makefile works correctly on Linux. It also works just fine on Windows in the MinGW environment (I do have to add a few flags on Windows but they are completely unrelated and the line ending with '$' still still present and works).
Since the makefile failed, I tried to run the 2 commands that it does manually. The first one succeeds but the second command fails to locate the dynamic libraries -- even though the directory they reside in is specified in the -L argument. What gives??
I put /usr/ccs/bin and /usr/sfw/bin in my PATH variable so that I can use make and gcc. I had to add /usr/sfw/lib to the LIBDIR variable, otherwise I was getting even more errors. Here is the makefile and the error that I get when I try to run make:
-bash-3.2$ cat makefile
CPP = gcc
COINPATH = /export/home/locuser/cbc_source/coin-cbc
CPATH += -I$(COINPATH)/include/coin
LIBDIR = -L$(COINPATH)/lib:/usr/sfw/lib
COINLIBS = -lCbcSolver -lCbc -lCgl -lOsiClp -lClp -lOsi -lCoinUtils -lm
CFLAGS += -DUSE_SNAPSHOT=1 -DNEW_SIMULATOR=1 -g $(CPATH)
DATASTORE=$(PSASRC)/datastore.a
.c.o:
$(CC) $(CFLAGS) -c -o $@ $<
.cpp.o:
$(CPP) $(CFLAGS) -c -o $@ $<
OBJSx = cbc.o
cbc: $(OBJSx) $
$(CPP) $(CFLAGS) -o cbc $+ $(LIBDIR) $(COINLIBS)
-bash-3.2$ make
mksh: Fatal error in reader: '$' at end of line
Current working directory /export/home/locuser/cbc_source/solver
Then this is what happened when I tried to run the 2 commands manually:
-bash-3.2$ gcc -DUSE_SNAPSHOT=1 -DNEW_SIMULATOR=1 -g -I/export/home/locuser/cbc_source/coin-cbc/include/coin -c -o cbc.o cbc.cpp
-bash-3.2$ gcc -DUSE_SNAPSHOT=1 -DNEW_SIMULATOR=1 -g -I/export/home/locuser/cbc_source/coin-cbc/include/coin -o cbc cbc.o -L/export/home/locuser/cbc_source/coin-cbc/lib:/usr/sfw/lib -lCbcSolver -lCbc -lCgl -lOsiClp -lClp -lOsi -lCoinUtils -lm
ld: fatal: library -lCbcSolver: not found
ld: fatal: library -lCbc: not found
ld: fatal: library -lCgl: not found
ld: fatal: library -lOsiClp: not found
ld: fatal: library -lClp: not found
ld: fatal: library -lOsi: not found
ld: fatal: library -lCoinUtils: not found
ld: fatal: file processing errors. No output written to cbc
collect2: ld returned 1 exit status
However, if I cd into the directory /export/home/locuser/cbc_source/coin-cbc/lib then the libraries do indeed exist there:
-bash-3.2$ cd /export/home/locuser/cbc_source/coin-cbc/lib
-bash-3.2$ ls lib*.so.0
libCbc.so.0 libClp.so.0 libOsiCbc.so.0
libCbcSolver.so.0 libCoinUtils.so.0 libOsiClp.so.0
libCgl.so.0 libOsi.so.0 libOsiCommonTests.so.0
Any ideas on what I am doing wrong here? It seems like there is something non-standard about make on Solaris?

Woo hoo! I was able to finally get past this. Thank you both for you assistance. I tried the LD_DEBUG=files option and it didn't seem to help me much. I got some additional output but it appeared unrelated. So then I separated out my -L argument into 2 separate arguments. This changed the error messages and led to some errors about operator new and delete not being found as well as some gz and BZ2 functions not being found:
Undefined first referenced
symbol in file
operator new[](unsigned int) cbc.o (symbol belongs to implicit dependency /usr/sfw/lib/libstdc++.so.6)
operator new(unsigned int) cbc.o (symbol belongs to implicit dependency /usr/sfw/lib/libstdc++.so.6)
std::basic_string<char, std::char_traits<char>, std::allocator<char> >::operator[](unsigned int) constcbc.o (symbol belongs to implicit dependency /usr/sfw/lib/libstdc++.so.6)
std::basic_ostream<char, std::char_traits<char> >::operator<<(std::basic_ostream<char, std::char_traits<char> >& (*)(std::basic_ostream<char, std::char_traits<char> >&))cbc.o (symbol belongs to implicit dependency /usr/sfw/lib/libstdc++.so.6)
vtable for __cxxabiv1::__si_class_type_infocbc.o (symbol belongs to implicit dependency /usr/sfw/lib/libstdc++.so.6)
std::basic_ostream<char, std::char_traits<char> >::operator<<(int)cbc.o (symbol belongs to implicit dependency /usr/sfw/lib/libstdc++.so.6)
BZ2_bzRead /export/home/locuser/cbc_source/coin-cbc/lib/libCoinUtils.so
operator delete[](void*) cbc.o (symbol belongs to implicit dependency /usr/sfw/lib/libstdc++.so.6)
operator delete(void*) cbc.o (symbol belongs to implicit dependency /usr/sfw/lib/libstdc++.so.6)
gzopen /export/home/locuser/cbc_source/coin-cbc/lib/libCoinUtils.so
gzread /export/home/locuser/cbc_source/coin-cbc/lib/libCoinUtils.so
BZ2_bzReadOpen /export/home/locuser/cbc_source/coin-cbc/lib/libCoinUtils.so
BZ2_bzWriteOpen /export/home/locuser/cbc_source/coin-cbc/lib/libCoinUtils.so
This led me to two conclusions:
1. I needed to change the makefile to use g++ instead of gcc (due to the messages about the operators existing in libstd*c++*.so.6).
2. I needed to include the libz and libbz2 libraries (by adding -lz and -lbz2) to COINLIBS.
I made those 2 changes to the makefile and it built successfully with gmake! So now I'm off to go document this information on our wiki. Thanks for the suggestions -- they pointed me in the right direction and ultimately helped me resolve this issue. :)

Problem with coldfusion installation on Solaris

Dear all,
Can any of you please help on installing coldfusion 8 setup on solaris.
I am getting the following error when I perform coldfusion installation
Preparing to install...
Extracting the JRE from the installer archive...
Unpacking the JRE...
Extracting the installation resources from the installer archive...
Configuring the installer for this system's environment...
Launching installer...
../coldfusion-61-sol.bin:
/tmp/install.dir.1997/Solaris/resource/jre/bin/java: cannot execute
Please help...It is an urgent issue.

Hi
Thank you for replay
This is happened exactly when I zlogin for first time to complete installation.
The installation procedure flow flawless.I set terminal type 13 (dt terminal) and everything is OK, but when I try to setup hostname I�ve got this error.
I try this with 3 different zones on this machine with same result
I have old x86 machines with solaris 11/06 zones installed , everything works fine (1 year uptime)
This is not the first zone in my life :)
Best Regards
DJ JAM

Problem with Linux executable in solaris

Similar Messages

Maybe you are looking for