Problem with LoadVars and stopping/playing

I've got a flash movie set up online that isn't working
properly. The details are this: the movie has two frames, the first
being a blank loading frame meant to keep anything from being
displayed till the variables are delivered by my PHP script, and
the second being the frame with the actual movie content.
The actionscript I use on the first frame is as follows:
quote:
names = new LoadVars();
names.onLoad = function() {
gotoAndStop(2);
names.load("txt?id="+"EBfig298x"+"&"+secure);
stop();
The
"txt. . .secure bit is the location of my PHP script that
delivers the necessary variables. I know that the PHP side of
things is working because the flash program DOES load all the
variables in exactly as I want it to. The problem I am having is
that when played, the program stops indefinitely on frame 1. I have
to right-click and force the program to play before it flickers
past frame 2 (the content) and back to the loading frame, where it
then loads the variables and plays like it's supposed to.
You can play the flash movie at
http://images4u.com/thumbs_i4u.php?play=EBfig298x.swf
As I described above, it remains blank indefinitely, so you
will need to force it to play to see what I'm talking about.
I'd appreciate any help you guys can give to get the movie
playing automatically as it should.

The first time flash attempts to do the loading, there
appears to be a 301 redirect from images4u.com to www.images4u.com
for the requested text data.
This then appears to sent... but then flash requests a
crossdomain.xml file from www.images4u.com and it receives none
(404 not found).
At that point I assume that the LoadVars onLoad does not
trigger.
The second time around it requests it from the
www.images4u.com domain and there is no problem - it doesn't seem
to need a crossdomain.xml permission.
So the problem is with the redirect. I don't know exactly the
solution. I would guess either make the request from flash to
www.images4u.com/etcetera or put a crossdomain.xml at your sites
root covering both www.images4u.com and images4u.com in terms of
permissions.

Similar Messages

Problems With Syncing and Audio Play with Itunes

I've been having a problem with Itunes and my iPhone for the past few days. First of all, iTunes will not play any songs. When I press the play button, the speaker changes to the play picture, and the song loads at the top, but the timer stays stuck on zero. Also, when I attempt to sync my iPhone it will not add new songs downloaded onto my phone. I have updated and re-installed iTunes and it has not helped. Also, tonight I even updated my phone settings (which I interestingly enough was able to do despite the fact that I cant get a song to transfer to my iPhone, yet somehow the new program settings were able to make the jump.)
I am using Windows Vista at the moment. Does anyone have any idea as to what could be going on? Any help would be greatly appreciated.

Hi,
Have you tried backing up you iPhone and copying over everything to iTunes etc.Apps,Videos...Then Restoring to factory setting?
If that doesn't work try Manually Managing you Music and Videos.

Multiple problems with installation and stop frame animation

I have just spent 24 hours of increasing frustration trying to install and use On Location. I recently bought a Matrox RTX 2 Premiere CS3 desktop edit suite. On Location recognises any camera I attach via the drop down menu but will never display a video image or activate any capture commands. An afternoon with my dealer's tech support did not find a solution.
Next I tried installing it on my Vaio laptop. It would not display the menu bar, but components would display, my camera was recognised, and I managed to capture avi type 2 files in mpeg at 1080i PAL. These will play back on the laptop in media player but crash Premiere when I import them. Matrox say these files should be supported. After these tests, OnLocation began to crash the Vaio as soon as I plugged in a camera. The Vaio presents a black screen and the OS freezes completely, requiring a hard boot for recovery.
I have uninstalled it and attempted to install it in a brand new Vista HP laptop. The install crashes during activation. After 3 uninstall/reinstall attempts I gave up. I will now start again with a fresh install on the Vaio. Will report back if I make any progress today. Any suggestions meanwhile would be much appreciated.
The holy grail, by any means possible, is to capture stop frame animations in HDV 1080i PAL format. I need one laptop to work for capture, then to transfer the animation files to the desktop for editing.
many thanks

Hi Martin,<br />Sorry to hear you're having such problems. I have no experience with Matrox system, so I cannot speak directly to compatibility with OnLocation CS3. For both computers, I'd be interested in seeing the system specs. If you're willing, how about sending the dxdiag file for each to me at [email protected] I'll see if anything jumps out at me.<br /><br />One detail that does not compute is your reference to recoring "avi type 2 files in mpeg at 1080i PAL." HDV content cannot be recorded to the AVI format. The only options are MPG and M2T. If the clips are indeed AVIs, then the camera must have been set to the DV mode.<br /><br />As for OnLocation crashing the computer so badly that a hard reboot is necessary, that generally points to some deeper problem in the computer's drivers or BIOS. When it gets into that state, have you tried bringing up Windows Task Manager (CTRL+SHIFT+ESCAPE) and killing the OnLocation process? I'm wondering if the system isn't totally locked up but appears to be so because on this low res display, OnLocation has basically taken over the whole display, so when it fails to launch, you can't see any other Windows controls. If this is the case, then deleting the AppProps file here: C:\Documents and Settings\<username>\Local Settings\Application Data\Adobe\OnLocation CS3.<br /><br />btw, the reason you see no menu bar is that the laptop's display is at the minimum for OnLocation CS3 (1024x768, if memory serves). The menu is shown only at higher display resoltions.

Burned CD is distorted and stops playing after a few seconds

I burned a cd in the usual manner with itunes, but the cd is distorted and stops playing in the cd player. I have burned dozens of cds in the past with no problem. Is this caused by the recent update?

Try a different brand of cd; I recently had this happen. It freaked me out at first, but after switching brands it never happened again.

In my shuffle 4g the songs not playing properly most of the times it gives some kind of sound and stop playing songs.

in my shuffle 4g the songs not playing properly most of the times it gives some kind of sound and stop playing songs.

First, make sure the headphones plug is completely pushed into the headphones jack. Because the jack serves multiple functions, the fit may be tighter than expected (especially if you have the Apple EarPods).
Also, try using the headphones with another device, to rule out bad headphones. Or try another set of (known working) headphones with the shuffle.
Are you using older headphones that have remote control buttons? Not the latest EarPods and not the immediately previous version of white Apple earbuds. Or non-Apple headphones with remote control buttons. It's possible they are not compatible and interfering with the shuffle's operation. Any standard headphones (with no buttons) should work.
If that does not help, you can try doing a Restore on the shuffle in iTunes. The Restore button is on the shuffle's Summary screen in iTunes. This will erase the shuffle, reinstall its software, and set it to defaut settings. If a software (or settings) problem on the shuffle is the cause, the Restore should fix it.
Otherwise, if the Restore does not help, it may be a hardware problem. If it has been less than one year since purchase, it is under warranty.

Problems with LE7 and focusrite saffire

hello,
i've bought a saffire and i've some problems: sometimes the audio stops playing and the only way i have to let it works again is to disconnect firewire cable and then reconnect it.
i've already downloaded V2 of saffire's drivers.
can you help me?
anybody using a saffire? anybody with same problems?
please help

I use the Saffire but I've never had this problem. Maybe you have a bad firewire cable and you lose temporary the connection? Are the lights on the Saffire changing when you lose connections? I've heard Focusrite support is great, you could try to email them.

Problem with Speaker and Headset in Windows Vista

Hi, I just got my Macbook Pro 13" and having problem with speaker and headset when working with Windows Vista (I have installed the driver from bootcamp). The sound very weak if I play music from Itunes or youtube even the volume already full and if i put my headset the sound not coming out. Is there anyone can help me to solve this problem?
Regards,Edwin

When you post about Windows / Boot Camp, in Mac Pro (workstation) forum where others with a MacBOOK would be more likely to have same hardware configuration, and you won't find Windows drivers on Apple downloads. More like at
http://www.guru3d.com or other sites, or go to RealTek (if that is the type of audio you have).

Problem with wpa and hidden ssid

hi,
I have a powerbook g4 (1,67ghz). i am having trouble connecting to a netgear router mr814 v3 if i use wpa and hidden ssid, i get a message, that the router would not support wpa!
there is no problem with wep and hidden ssid or wpa with no hidden ssid.
is also have no problems with wpa and hidden ssid with an ibook.
the problems occur only with the powerbook with os x 10.3.9 as well as 10.4.2. even after the recent airport update, no change.
thanks for the help,
ben

I would use WPA and broadcast your SSID.
It use to be useful, but closing your Airport or wireless network (sometimes referred to as not broadcasting your SSID) is really no longer a real option when it comes to wireless security.
Unfortunately "Closed" networks, MAC access control lists, and reduction in transmission power are all more "feel good" security rather than real security. All these various approaches are dated and mistakenly lead to overconfidence.
WPA is your friend if you value wireless security.
My recommendation is not to worry about broadcasting your SSID but use WPA. This will be more secure than a closed WEP encrypted network. Closing your network makes it very difficult for neighbouring networks to see which channels are free thus causing potential interference problems.
Another thing to consider is that a closed network is still broadcasting and therefore is detectable (regardless of whether it is broadcasting a SSID). If someone was determined to hack into your network, then not broadcasting your SSID and MAC address access control is not going to stop them.
WPA is virtually uncrackable (only really vunerable to a dictionary attack if a real word is used as a password) and therefore will stop the casual user and the determined hacker.

Problem with vista and 5.1

problem with vista and 5. i install my old audigy 2 zs exp pro with DTT2500 speaker
In my new pc.
i install vista 64 and SBAX_PCDRV_LB_2_8_000 driver from creative site.
when i go to control panel/sound and test the 5. surrund ' iget only the two front speaker.
why is that?
i try to play a song from vista folder "Distance" and i get all 5 +sub to play.
do i miss something?
is the test worg and with another test i can get all spedajer to work or the driver is not good?
thanks for all you help
last update...
i can get 4 speaker when i use the fourpoint mode on the desktop theather 5. dtt2500 digital,
but in movie mode i get only 2 front speaker.
i use the digital out from the sound blaster.
Message Edited by raflevi on 05-4-2009 02:38 [email protected]

My apologies about not explaining further about disabling SPDIF passthrough. See the steps below to enable DDL encoding.
***Before proceeding please make sure that you've purchased, installed and activated the DDL pack***
. Open Creative Audio Console, go to the Decoder tab to disable driver level encoding and enable SPDIF passthrough (this is done by selecting SPDIF passthrough or any similar option that enable the use of an external decoder) instead of using the built-in decoders.
2. Open up your playback devices window (right click on the speaker icon on the taskbar and select playback devices) and set analog speakers (not SPDIF) as your default device. This is VERY IMPORTANT step, or else you get the "the device is busy" error when enbaling DDL encoding.
3. In the Audio Console, select the Encoder tab and enable DLL encoding.
Note:
When DDL encoding is enabled, it makes exclusi've use of your SPDIF connection so, no passthrough is possible. The default output format when using DDL encoding is 48KHz/6 bits. If you make use of any AC3 audio filters (such as ac3filter/others included in codec packs/media player softwares) when DLL encoding is enabled, then please change their output device to analog speakers instead of SPDIF.
To use back SPDIF passthrough (when playing back media with a pre-encoded audio source), open up Audio Console and disable DDL encoding and in the Playback Devices window change the default device to SPDIF. If you make use of any AC3 audio filters (such as ac3filter/others included in codec packs/media player softwares) then please change their output device back to SPDIF. You may also wish to change back your output format to 92KHz/24 bits (right click on SPDIF and select properties -> Advanced tab).
raflevi wrote:
when you said to install ddl? pack you mean the "[url="http://buy.soundblaster.com/_creativelabsstore/cgi-bin/pd.cgi?page=product_detail&category=Software&pid=F 2222SR6PAKH5DGY6SD">Dolby Digital Li've Pack - SB Audigy Series[/url] "?
thanks again for all your help.
i wanted to use the 5. function mostly for games
Yes... also please see the link in my previous post.
Hope this answers your questions.

Problem with Facebook and instagram after istalling iOS 7.1. Can not open them!

Problem with Facebook and instagram after istalling iOS 7.1. Can not open them!

Hi Hanjon!
Here is an article that will help you troubleshoot these purchased apps:
iOS: An app you installed unexpectedly quits, stops responding, or won’t open
http://support.apple.com/kb/ts1702
Thanks for being a part of the Apple Support Communities!
Regards,
Braden

Problem with java and pogo games

i use mozilla and now with the problems with java and hackers cannot play my pogo games,what can i do? i disabled my java i tried java 6 doesnt work or is not safe,what is a safe way to play games on pogo that use java?

Oracle has released a Java 7 Update 11 to address security vulnerabilities and you should update to that version.
*https://support.mozilla.org/kb/how-to-use-java-if-its-been-blocked
See also:
*http://kb.mozillazine.org/Java#Windows_installation_issues
You can find the latest Java version on the Oracle website.
See Java Platform > Java SE 7U11 and Java 6U38 (Download JRE)
*http://www.oracle.com/technetwork/java/javase/downloads/index.html

Problem with IE and pubblishedIntoWall

Hi to all,
   i have a problem with InternetExplorer and CallBack
In my flex code i have :
flash.external.ExternalInterface.addCallback("pubblishedIntoWall", pubblishedIntoWall);
The javascript code:
function pubblishedIntoWallCarrello() {
        document.getElementById("composer").pubblishedIntoWall(1)
In both Firefox and Chrome the javascript works in the right way.
In internet explorer the function pubblishedIntoWall is not called.
Have some one got an idea of this problem?
Thanks for your time

First of all, thank for your reply
This is the code that i use in the HTML, i use   allowScriptAccess = sameDomain
----------- CODE -------------------
<div id="divContainercomposer" style="position:absolute;left:50%;top:0px;width:930;height:100%;margin-left:-465px">
            <script language="JavaScript" type="text/javascript">
            
            </script>
            <noscript>
                  <object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000"
                        id="flashContent" width="930" height="100%"
                        codebase="http://fpdownload.macromedia.com/get/flashplayer/current/swflash.cab">
                        <param name="movie" value="composer.swf" />
                        <param name="quality" value="high" />
                        <param name="bgcolor" value="#ffffff" />
                        <param name="allowScriptAccess" value="sameDomain" />
                        <embed src="composer.swf" quality="high" bgcolor="#ffffff" id="composer"
                            width="930" height="100%" name="composer" align="middle"
                            play="true"
                            loop="false"
                            quality="high"
                           allowScriptAccess="sameDomain"
                            type="application/x-shockwave-flash"
                            pluginspage="http://www.adobe.com/go/getflashplayer">
                        </embed>
                </object>
            </noscript>
</div>

Problem with JRE and Yahoo applets

Hi, I couldn't find any answer for this anywhere else...
Whenever I try to play a Yahoo game, certain windows will "shake". For example, if I log into yahoo, then go to play their spades game, the applet will load without any problem. The game room will appear and everything seems to be fine. But if I click on the Start Panel, the borders of the Start menu will "shake" If I right click on anything, that menu will also shake. This only occurs while JRE is running the yahoo applet. Once I leave the yahoo game, everything returns to normal. If I use IE and MSVM, this problem does not occur. This problem does not seem to occur with other instances of Java either. Only Yahoo games. I tried searching Yahoo for an answer to this, but didn't find anything. When I tried getting help from them, they replied with an email to update Java and/or my browsers. Well, I am using version 1.4.2_04 of java, and have IE6 updated as of today. Also, I am using Opera version 7.54 and Firefox 0.93. This problem with Java and Yahoo occurs no matter which browser I am using. The only way to keep this from happening seems to be to use IE with MSVM. Any ideas?

That page does apply. Everything that you have written indicates conclusively that the Yahoo game you're playing is the source of the problem. The fact that it works with the MS jvm but not with the Sun jvm, that the Sun jvm works with other Java applets, etc all say the same thing - that Yahoo applets wer/are coded to work with the MS jvm, which uses MS extensions in violation of the Sun/MS licensing agreements. The statement at the bottom of the page is proof positive - your spades game is not listed by Yahoo as being fixed.
"07/17/03 - From Yahoo! Customer Care:
We have deployed a fix for the incompatibilities with the Sun JVM� in the following games:
Chess Gin Cribbage Euchre Bridge
Hearts Toki Toki Boom Graffiti Pool
We plan to upgrade the rest of the games on an ongoing basis. "
The Yahoo applet is the problem and requires repair...

Problem with Class and Classpath

Hello ME Windows Users, now before you place a wry smile on your face, I have a problem with path and classpath. Stop it, I can see you smiling!
By visiting the the last 10 pages of the forum and reading Sun installation notes, some tooldocs and by given some answers by some nice people, I have become an expert in turning off my computer, about 10 times/hr. I still am trying to make my first cup of java.
With the ME computer,
I'm unable to right click on the desktop and go to properties, advanced,
I'm unable to go go start, run, sysedit,
I'm unable to change the ms-dos window of autoexec.bat, it just shuts down.
Now before you tell me, I should of bought a different computer, the only place I can find to modify the path and classpath is in the environment which is in system configuration under tools. Here I have placed numerous configurations, like
C:\java>set path=%path%;c:\j2sdk1.4.2\bin
C:\java>set classpath=%classpath%;.;
;java_dir\bin where ;java_bin is c:\j2sdk1.4.2
.; java_dir\bin; %path% where ;java_bin is c:\j2sdk1.4.2 and the list goes on.
But, I know you are still smiling, the % signs comes up in a dialog box, saying too many, and will not convert the text to the environment to be saved when I close down for the tenth time in the last hour.
Can someone help me before I make a real cup of coffee and accidentally drop it on the ME box.
Have a laugh on me Mik.

C:\java>set path=%path%;c:\j2sdk1.4.2\binGood
But it is no good because it has to many % and a dialog box appears, saying you have too many parameters.
Are you saying I have to shutdown again to answer your ?
From the HELP menu-
To confirm startup commands line by line
Click Start, and then click Shut down.
Click Restart, click OK, and then press and hold the CTRL key until the Windows Startup Menu appears.
Enter the number for Step-by-step confirmation, and then press ENTER.
For each command you want to run, press Y.
If the command runs successfully, you are prompted with the next command.
If the command does not run successfully, you receive an error message.
To skip a command, press N.
Mik

Problems with a simple stop watch program

I would appreciate help sorting out a problem with a simple stop watch program. The problem is that it throws up inappropriate values. For example, the first time I ran it today it showed the best time at 19 seconds before the actual time had reached 2 seconds. I restarted the program and it ran correctly until about the thirtieth time I started it again when it was going okay until the display suddenly changed to something like '-50:31:30:50-'. I don't have screenshot because I had twenty thirteen year olds suddenly yelling at me that it was wrong. I clicked 'Stop' and then 'Start' again and it ran correctly.
I have posted the whole code (minus the GUI section) because I want you to see that the program is very, very simple. I can't see where it could go wrong. I would appreciate any hints.
public class StopWatch extends javax.swing.JFrame implements Runnable {
    int startTime, stopTime, totalTime, bestTime;
    private volatile Thread myThread = null;
    /** Creates new form StopWatch */
    public StopWatch() {
     startTime = 0;
     stopTime = 0;
     totalTime = 0;
     bestTime = 0;
     initComponents();
    public void run() {
     Thread thisThread = Thread.currentThread();
     while(myThread == thisThread) {
         try {
          Thread.sleep(100);
          getEnd();
         } catch (InterruptedException e) {}
    public void start() {
     if(myThread == null) {
         myThread = new Thread(this);
         myThread.start();
    public void getStart() {
     Calendar now = Calendar.getInstance();
     startTime = (now.get(Calendar.MINUTE) * 60) + now.get(Calendar.SECOND);
    public void getEnd() {
     Calendar now1 = Calendar.getInstance();
     stopTime = (now1.get(Calendar.MINUTE) * 60) + now1.get(Calendar.SECOND);
     totalTime = stopTime - startTime;
     setLabel();
     if(bestTime < totalTime) bestTime = totalTime;
    public void setLabel() {
     if((totalTime % 60) < 10) {
         jLabel1.setText(""+totalTime/60+ ":0"+(totalTime % 60));
     } else {
         jLabel1.setText(""+totalTime/60 + ":"+(totalTime % 60));
     if((bestTime % 60) < 10) {
         jLabel3.setText(""+bestTime/60+ ":0"+(bestTime % 60));
     } else {
         jLabel3.setText(""+bestTime/60 + ":"+(bestTime % 60));
    private void ButtonClicked(java.awt.event.ActionEvent evt) {
     JButton temp = (JButton) evt.getSource();
     if(temp.equals(jButton1)) {
         start();
         getStart();
     if(temp.equals(jButton2)) {
         getEnd();
         myThread = null;
     * @param args the command line arguments
    public static void main(String args[]) {
     java.awt.EventQueue.invokeLater(new Runnable() {
         public void run() {
          new StopWatch().setVisible(true);
    // Variables declaration - do not modify
    private javax.swing.JButton jButton1;
    private javax.swing.JButton jButton2;
    private javax.swing.JLabel jLabel1;
    private javax.swing.JLabel jLabel2;
    private javax.swing.JLabel jLabel3;
    private javax.swing.JPanel jPanel1;
    // End of variables declaration
}

Although I appreciate this information, it still doesn't actually solve the problem. I can't see an error in the logic (or the code). The fact that the formatting works most of the time suggests that the problem does not lie there. As well, I use the same basic code for other time related displays e.g. countdown timers where the user sets a maximum time and the computer stops when zero is reached. I haven't had an error is these programs.
For me, it is such a simple program and the room for errors seem small. I am guessing that I have misunderstood something about dates, but I obviously don't know.
Again, thank you for taking the time to look at the problem and post a reply.

Problem with LoadVars and stopping/playing

Similar Messages

Maybe you are looking for