Problem with LONG FIELD

Hello,
In HTML DB, I would like to insert a line in a table with a database link (in a PL/SQL Block).
Description of my table :
Nom NULL ? Type
LCOMMENTID NOT NULL NUMBER(10)
DTLASTMODIF DATE
MEMCOMMENT LONG
TABLENAME VARCHAR2(18)
My command :
insert into amcomment@B_ASSET.WORLD values (1,'01/01/2005','toto','AMTICKET');
Each time I try to insert a value in the long field, I have this error :
"ORA-06550: Ligne 8, colonne 13 : PL/SQL: ORA-00600: code erreur interne, arguments : [qctstc2o1], [1], [0], [31], [8], [0], [0], [] ORA-06550: Ligne 8, colonne 1 : PL/SQL: SQL Statement ignored"
I try also with null value. Same problem ...
Have you a solution for this problem ?
Thanks.
FW

From the SQL Reference guide:
"LONG and LONG RAW columns cannot be used in distributed SQL statements"
It should also be noted that the LONG datatype has been deprecated and may not be supported in the future. It is suggested that LONG columns be replaced with CLOB columns. These are much easier to work with than LONGs and have fewer restrictions. You can easily use the TO_LOB function to convert a LONG to a CLOB (see http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96540/functions139a.htm#79466)

Similar Messages

Problem with a field set to refresh after insert at Row level

hello all,
i have a problem with a field (a serial) which is set by a db trigger at insertion. The field "refresh after insert" is properly set in the Entity and everything is refreshed correctly when i insert data via an adf form in a jspx but when i want to insert programmatically nothing is refreshed. I insert data this way :
ViewObject insertVO = findViewObject("myView");
Row newRow = insertVO.createRow();
newRow.setAttribute("mandatoryAttribute1",value1);
newRow.setAttribute("mandatoryAttribute2",value2);
<more init here but not the serial since it will be set by the DB trigger>
insertVO.insertRow(newRow);
but when i want to get back the value with "newRow().getAttribute("TheSerial");" i always get a null back and not the value set by the db trigger.
One way to get the serial is to commit after each insert but i don't want to commit between inserts.
i've tried to unset the refresh after insert and override the createDef() method to setUseReturningClause(false) as it's is advised in chapter 26.5 of the ADF 4GL dev. guide but in this case i have an exception JBO-29000: JBO-26041.
How can i get the value back properly ?
thanks
-regards

The data for the newly created row doesn't get inserted into the database until the commit is executed, so the insert trigger isn't called.
If you need to get the value without committing, then you should implement the trigger programmatically and drop the trigger from the database. The code below shows how you could do this.
ViewObject insertVO = findViewObject("myView");
Row newRow = insertVO.createRow();
SequenceImpl seq = new SequenceImpl("MY_SEQ", insertVO.getDBTransaction());
Long next = (Long)seq.getData();
newRow.setAttribute("primaryAttribute", new Number(next));
...You will need to replace MY_SEQ and primaryAttribute with the correct values for your example, but this should acheive what you want.

Problem with currency field in smart form

hi
friends ..
i had problem with currency field in smartform iam printing 5 currecny
fields after the main window .But not getting printed on right way gets printed down from the given mesaurement and i get lot of gap betwen the
each fields for ex.
33,260.00
120.00
0.00
0.00
0.00
i thought the the problem is with space .so iwanted to condense it but cannot as it is currency field so move into character fields .but the user want out put in currency format like 22,60.20 if i get the value in char variable i get 2260.20 which i dont want .
so pls help me how to condense or shift left and print the currency field on right place.
regards
answers will be rewarded points.

hi,
this is a normal problem u can avoid this by moveing these currencu value to a character field then print the char field us ing condece... &var(C)&..
eve if not solve the problem use the TEMPLATE node..
Please Close this thread.. when u r problem is solved. Reward all Helpful answers
Regards
Naresh Reddy K

Error -43 when try playback on win7 64bits over the network QT that recide MacPro osx 10.5 however i can play with VLC player, This happend when the QT is inside a Folder with name longer 8 chars other files has no problem with long names just the QT

error -43 when try playback on win7 64bits over the network QT that recide MacPro osx 10.5 however i can play with VLC player, This happend when the QT is inside a Folder with name longer 8 chars other files has no problem with long names just the QT nfs sharing

Never mind, I already found the solution myself.
What I did wrong was:
- not copying the master image to the nbi folder
- selecting the netinstall-restore.dmg image as source to copy to my HD.
The thing is, when you create a netinstall image for 10.5, the image itself is already included in the netinstall image so you don't have to do anything else.
With the 10.4 image however, you also have to copy the master image to the NetBootSP0 directory.
In the *.nbi folder contains an netinstall-restore.dmg file. But that is only to boot you to netrestore, it's not the image itself.
Other alternative is to copy the images to another folder that you share with AFP and adjust the configuration of netrestore like described in this manual:
http://www.shellharbourd.det.nsw.edu.au/pdf/misc/osxrestoringnet.pdf
This manual was also how I figured out that I forgot to copy the image to the NetBootSP0 folder.

Has anyone else had problems with long wakeup times on Cinema displays?

We're having problems with long wakeup times on our Cinema Display. Noticed it after the Maverick update.
Need help please. This thing is nothing more than a boat anchor to my developers... frustrating, expensive boat anchor.
Thoughts?
Thanks,
Jeff Stutzman

Hey Jeff,
Thanks for the question. I understand you are experiencing issues with an external display and your MacBook Air. The following resource may provide a solution:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
While you should give all of the troubleshooting steps a whirl, definitely make sure to follow the steps in this section:
Reset the system
You can reset the Mac's parameter RAM and SMC.
Thanks,
Matt M.

Problem with long response time when looking at queues!

Hello,
I have a problem with extream long response times, when looking at the queues in Message mapping test tool . Does anyone know how to improve performance.
The source message I use is about 200 segments (idoc)
The mapping is done with the graphical tool, with 10-15 field contain standard sap functions for mapping.
Target structure is EDIFACT (xml)
Brgds
Karl Bergströ

Hi Rod.
Go to Apple Menu > System Preferences > Network > Show: Network Port Configurations. Make sure that the configuration used to connect to Internet is at the top of the list. Also, disable any communications/networking configuration enabled, but not in use.
If the above doesn't fix the problem, open Keychain Access > Preferences, and disable Search .Mac For Certificates if it's enabled. Take a look at the following articles for an explanation of why this could fix the problem:
http://www.hawkwings.net/2006/07/18/apple-mail-phones-home-too/
http://www.macgeekery.com/tips/mailapp_doesnt_phone_homeeither

Problem with Date fields in Search panel

Hi all,
I use TP2 and in my jspx page I have a search panel with two date fields and table where the results is displayed. But there is a problem with these date fields, because when I search dates the results is nothing even I retype the date from table. Also I have other pages where this problem exist with same structure.
Could somebody help me with some advice?
Thanks in advance!

Hi Frank,
Thanks for the answer.
I use the standart method to make search panel with drag and drop the data control to the page. The other search panel fileds work fine, only the date fileds are problem. Maybe something in view object doesn't work properly.
Here I post the code from my page.
<table border="1" style="margin:5px;">
<tr>
<td>
<af:showDetailHeader text="ТЪРСЕНЕ" disclosed="true"
inlineStyle="width:780px;">
<table cellspacing="2" cellpadding="3" border="0">
<tr align="left">
<td align="right">
<af:outputLabel value="#{bindings.EGN.hints.label}"/>
</td>
<td align="left">
<af:inputText value="#{bindings.EGN.inputValue}"
label="#{bindings.EGN.hints.label}"
columns="#{bindings.EGN.hints.displayWidth}"
maximumLength="#{bindings.EGN.hints.precision}"
simple="true"/>
</td>
<td align="right">
<af:outputLabel value="#{bindings.LNC.hints.label}"/>
</td>
<td align="left">
<af:inputText value="#{bindings.LNC.inputValue}"
label="#{bindings.LNC.hints.label}"
columns="#{bindings.LNC.hints.displayWidth}"
maximumLength="#{bindings.LNC.hints.precision}"
simple="true"/>
</td>
<td align="right">
<af:outputLabel value="#{bindings.AccPersonID.hints.label}"/>
</td>
<td align="left">
<af:inputText value="#{bindings.AccPersonID.inputValue}"
label="#{bindings.AccPersonID.hints.label}"
columns="#{bindings.AccPersonID.hints.displayWidth}"
maximumLength="#{bindings.AccPersonID.hints.precision}"
simple="true"/>
</td>
</tr>
<tr align="left">
<td align="right">
<af:outputLabel value="#{bindings.PersonName.hints.label}"/>
</td>
<td align="left" colspan="5">
<af:inputText value="#{bindings.PersonName.inputValue}"
label="#{bindings.PersonName.hints.label}"
columns="#{bindings.PersonName.hints.displayWidth}"
maximumLength="#{bindings.PersonName.hints.precision}"
simple="true"/>
</td>
</tr>
<tr align="left">
<td align="right">
<af:outputLabel value="#{bindings.DateFrom.hints.label}"/>
</td>
<td align="left">
<af:inputDate value="#{bindings.DateFrom.inputValue}"
label="#{bindings.DateFrom.hints.label}"
simple="true">
<af:convertDateTime pattern="#{bindings.DateFrom.format}"/>
</af:inputDate>
</td>
<td align="right">
<af:outputLabel value="#{bindings.DateTo.hints.label}"/>
</td>
<td align="left">
<af:inputDate value="#{bindings.DateTo.inputValue}"
label="#{bindings.DateTo.hints.label}"
simple="true">
<af:convertDateTime pattern="#{bindings.DateTo.format}"/>
</af:inputDate>
</td>
</tr>
<tr>
<td align="right">
<af:commandButton actionListener="{bindings.Execute.execute}"
text="#{bundle.FindBtn_LABEL}"
disabled="#{!bindings.Execute.enabled}"
icon="/images/find.png"/>
</td>
<td align="left">
<af:commandButton text="#{bundle.FindClearBtn_LABEL}"
icon="/images/find_clear.png"
action="#{PeopleBean.onClearVCBtn}"/>
</td>
</tr>
</table>
</af:showDetailHeader>
</td>
</tr>
</table>
Also I have a result table for the search panel, but I don't believe the problem can be there because it works fine when I search in fields different by inputDate.
Do you have any suggestions?

Problem with Date-Field

Hi,
I have a problem with a date-field. Maybe I must describe the problem more detailled, but first I just want to ask you, if you know the following error-message: "21.10.2010 kommt nicht in der Menge der erlaubten Werte vor". I don't know the correct translation but it must be something like this: "21.10.2010 does not occur in the quantity of the permitted values". I don't find the position in the sourcecode of this message. And I know, that this message isn't thrown by a functionblock from SAP. So what is the describtion of this message?

Yes I have a date field in my form. Ok I must describe it more detailled. I have an employee searchfield. After select an employee you see a form. After filling the form you click on "Send". It creates a ticket and sends the data to the Backend and jumps back to the employee search field. Untill this point everything works fine. There is no problem with the datefield. Now I want to create the form. I choose an employee and fill the form. But now it comes this message. But not after clicking the "send" button. The message comes after changing some data (e.g. change a radio button). So it looks like a validationproblem, but only at the second creationprocess. Maybe the first date is in some cache? I don't know...

Problem with long text

Hi folks,
iam uploading longtext in transaction KP06 in bdc programing using create_text.
now my problem is if i pass selection criteria
case 1:
Vertion : N0
fiscal year : 2007
planner profile: CCPLAN4
then the budeget plan data uploading successfully along with long text.
case2: Vertion : N1
in this case also everthing wrking fine
case3: Vertion : 001
in this case budgetplan data uploading sucessfully but longtext is not uploading,
i debbug the proragm , create_text also returning sy-subrc = 0. but if i check in KP06 the long text is not there.
data declaration
vertion : VERSN type C(3)
can u tell me the problem is in logic or with FM ?
note : i checked with save_text also.
regards
neeru

HI Naimesh,
the FM Create_text internally contains both FMs save_text and commit_text,
even i debug the FM in case of vertion N1, N0 and 001,
all the cases sy-subrc = 0.
code:
CLEAR G_OBJNR.
LOOP AT RECORD.
COST = RECORD-BDC01.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
    EXPORTING
      input = COST
    IMPORTING
      output = COST.
    CONCATENATE 'KS' p_kokrs record-bdc00 INTO g_objnr.
        SELECT SINGLE * FROM COSP WHERE OBJNR = g_objnr
                          AND GJAHR = P_GJAHR
                          AND VERSN = p_ver
                          AND KSTAR = COST.
IF SY-SUBRC = 0.
      LEDNR = COSP-LEDNR.
      OBJNR = COSP-OBJNR.
      GJAHR = COSP-GJAHR.
      WRTTP = COSP-WRTTP.
      VERSN = COSP-VERSN.
      KSTAR = COSP-KSTAR.
      HRKFT = COSP-HRKFT.
      VRGNG = COSP-VRGNG.
      VBUND = COSP-VBUND.
      PARGB = COSP-PARGB.
      BEKNZ = COSP-BEKNZ.
      TWAER = COSP-TWAER.
CONCATENATE LEDNR OBJNR INTO OBJNR.
CONCATENATE OBJNR GJAHR INTO TNAME1 separated BY SPACE10.
CONCATENATE TNAME1 WRTTP VERSN INTO TNAME2.
CONCATENATE TNAME2 KSTAR INTO TNAME3 separated BY SPACE.
CONCATENATE TNAME3 VRGNG INTO TNAME4 separated BY SPACE4.
CONCATENATE TNAME4 BEKNZ INTO TNAME5 separated BY SPACE10.
CONCATENATE TNAME5 TWAER INTO TNAME.
I_THEAD-TDOBJECT = 'CCSS'.
I_THEAD-TDID = 'COSP'.
I_THEAD-TDNAME = TNAME.
I_THEAD-TDSPRAS = 'E'.
APPEND I_THEAD.
i_tline-tdformat = '*'.
I_TLINE-TDLINE = RECORD-LONGTEXT.
APPEND I_TLINE.
loop at i_thead.
CALL FUNCTION 'CREATE_TEXT'
EXPORTING
    FID               = I_THEAD-TDID
    FLANGUAGE         = I_THEAD-TDSPRAS
    FNAME             = I_THEAD-TDNAME
    FOBJECT           = I_THEAD-TDOBJECT
SAVE_DIRECT       = 'X'
FFORMAT           = '*'
TABLES
    FLINES            = i_tline
EXCEPTIONS
NO_INIT           = 1
NO_SAVE           = 2
OTHERS            = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDLOOP.
CLEAR I_TLINE.
REFRESH I_TLINE.
CLEAR I_THEAD.
REFRESH I_THEAD.
SELECT SINGLE * from cokp into itab WHERE OBJNR = g_objnr
                          AND GJAHR = P_GJAHR
                          AND VERSN = p_ver
                          AND KSTAR = COST.
if sy-subrc = 0.
   itab-TXFLG = 'X'.
   append itab.
   write:/ 'Text saved for', record-bdc00 , record-bdc01.
   else.
      write:/ 'Text saved for', record-bdc00 , record-bdc01.
      ENDIF.
ENDIF.
my program wrking fine but the long text is not visible for vertion 001.
regards
niru

Problems with Long Interactive PDFs with Extensive Interactivity via Buttons and Hyperlinks

I have inherited a project which requires the creation of large interactive pdfs with lots of buttons and hyperlinks. I am having continuing problems with buttons not working and long periods of wasted time as attempted exports fail.
Background:
The largest books range from 264 MB to 411 MB – (764 to 1024 pages). Per book, the maximum number of buttons on each page is 16, linking separate files (subsections) in the book via text anchors. The buttons are created using Master Pages which are set for each file (subsection) in the book. 50% to 60% of the pages in each file (subsection) will also be referenced as 2 hyperlinks. One is the source page hyperlink on each workflow and the second is a listing on the source page as a possible navigation path. I have created hyperlink destinations for each page which is used to generate the source and navigation hyperlinks. With 2 hyperlinks representing 50%-60% of the pages - that means the largest book contains a maximum of 1200 hyperlinks. Each file (subsection) also has it’s own separate TOC and the bookmarks that are created (optionally) during the TOC creation process.   As currenlty formatted, the book is primarily images of workflows which mean 50%-60% of the pages contain pdf images.
Several questions:
1. How do I get my buttons to work consistently? There is nothing worse than working hard and then ending up with faulty product. I have been thinking about combining all the files into 1 document per book. Then I could change the buttons to objects, add a hyperlink over each one and set them for a specific hyperlink destination. Can I do that if the buttons are on Master Pages? Can InDesign handle a document with 1024 pages?    I can't fix the problems in Acrobat later because it would mean 1024 fixes for just 1 button correction.
2. How do I stop InDesign from freezing when exporting these large pdfs? It seems to wait until the final steps to crash which sometimes means a 4-6 hour waste of time per export.
3. Are we making a mistake using pdfs as our workflow images? I'm not pleased with the quality of the images we have and wonder if we switched to another image format if this would improve the results.   Would it be worth the effort and relinking? I have been reading different information on what the preferred source image format is for InDesign. One article I found yesterday says using pdf images is a problem. Another site said the Photoshop, TIF and JPG are preferred but PDFs were also acceptable.
4. Do I need to propose scrapping InDesign as the source of the project? If so, what application can better meet my needs?

Those are the limitations you have to put up with.
Apple doesn't follow the PDF spec. It chooses which PDF features it will support.
As to the version number (v5 or v6 or the new multimedia features in v9), there is different support in different versions of Reader/Acrobat as the product has developed. You just need to post a message to downloaders that they need to view the file in Adobe Reader version X or above to get the best experience.
Other industry standards face the same problem: How can you add new feature like multimedia? You can't always be backwards compatible.

Smartform: Formatting Problem with QUAN-Field

I want to print a smartform and get exception 1 (formatting error). With function SSF_READ_ERRORS I get an error table. There is on entry: errnumber = 020011, msgid = SSFCOMPOSER, msgty = E, msgno = 601, msgv1 = wa_outtab-menge.
It seems to be a formatting problem with field WA_OUTTAB-MENGE. But in the structure this field is referenced correctly.
Does anybody know a solution?

I solve this kind of problem in my SmartForm.
Try this:
Go to "Global Definitions" Node, then "Current/Quant.Fields" tab and set these values:
Field Name: WA_OUTTAB-MENGE
Reference Field: WA_OUTTAB-MEINS
Data Type: QUAN
Best Regards,
Eduardo Ribeiro.

Problem with decimal fields using BADI For PD Infotypes

Hi,
I'm implementing BADI HRBAS00INFTY.
For reading the fields of infotype , I'm using the substring
of the field NEW_INNNN-VDATA .
I have a problem with fields of type DEC.
In field NEW_INNNN-VDATA it looks like this : '####'
I believe that the possible reason for this is conversion from DEC to CHAR
But I don't know how to fix it.
Thank you .
Message was edited by: Alon Lozinsky

Hi Alon,
We had same issue. Use following code.
data: hri1011_str type hri1011.
move new_innnn-vdata to hri1011_str.
HRI1011_STR fields will have decimal values.
Let me know if you still have any issues. If solution works, kindly do Point Recognition.
-Bharat

Problem with number field

Hi,
I'm using ADO (Oracle Provider for OLEDB) to connect Oracle 9. If the type of any field in table is Number(9) and I open query with this field, all negative values are displayed as positive values. For example: If I write -1 value to this field and then post the dataSet (Delphi7 - TADOQuery) value is refreshed to 1. Real value in database is -1.
Could anybody help me with this problem?
Regards Jan.

Once again :)
I finally foud out that Deplhi does support (varDecimal), but delphi TCustomADODataSet (ADO recordSet wrapper) component incorrecltly treats such field type. It regards Decimal(<9,0) as integer (TIntegerField) but when it gets value from underlying ADO recordset it expects integer variant. So it's delphi problem. I hat to fix this problem in source code of this component.
Regards Jan.

Problem with number-fields in csv-Export-Files

Hello,
the export with the csv option works fine and our users like this export-function.
But Unfortunatelly we have some problems with the exported number fields. In my region I defined the field with a format mask.
On the screen it looks fine but when I change to csv the values are exported as text-values.
So in excel the columns are shown with left alignment.
When I try to change the format in excel to number, excel change the column type but not the value inside.
On this account we cannot use the sum-function and the display of the value is wrong (alignment).
Which possibilities do I have to resolve that problem?
Thanks in advance
Ulrike

I have the same issue - Anyone any ideas on how to export currency values in a report to excel as numbers?

Mail problem with long titles using utl_smtp / mixed content / attachements

Hello,
I'm having a problem with sending emails. The title as well as the body needs to be able to contain accented letters (é ç ...).
For the body i got it working.
And the title works fine too, untill the encoding passes a certain length, then goes all wrong and my mail header starts showing up in the mail body.
Could anyone help me in finding a solution?
Thanks in advance
Below my code:
DECLARE
   v_From       VARCHAR2(80) := 'test@localhost';
   v_Recipient VARCHAR2(80) := 'test@localhost';
   v_Cc         VARCHAR2(80);
-- long subject causing problems
   v_Subject    VARCHAR2(32000) := '123456789111111111111111111111118888888888888111111111111111991234567891111111111111111111111188888888888881111111111111119912345678911111111111111111111111888888888888811111111111111199';
   v_body       VARCHAR2(32000) := '<a href="#">tester</a><br><br>en nog wat éékes en ççkes';
   v_Mail_Host VARCHAR2(30) := 'localhost';
   v_Mail_Conn utl_smtp.Connection;
   crlf         VARCHAR2(2) := chr(13)||chr(10);
BEGIN
v_Mail_Conn := utl_smtp.Open_Connection(v_Mail_Host, 25);
utl_smtp.Helo(v_Mail_Conn, v_Mail_Host);
utl_smtp.Mail(v_Mail_Conn, v_From);
utl_smtp.Rcpt(v_Mail_Conn, v_Recipient);
utl_smtp.Data(v_Mail_Conn,
-- write header
    'Date: '   || to_char(sysdate, 'Dy, DD Mon YYYY hh24:mi:ss') || crlf ||
    'From: '   || v_From || crlf ||
    'Subject: ' || utl_encode.MIMEHEADER_ENCODE(v_Subject) || crlf ||
    'To: '     || v_Recipient || crlf ||
    'Cc: '     || v_Cc || crlf ||
    'X-Mailer: Mailer by Oracle UTL_SMTP' || crlf ||
    'X-Priority: 1' || crlf ||
    'MIME-Version: 1.0'|| crlf ||       -- Use MIME mail standard
    'Content-Type: multipart/mixed;'|| crlf ||
    ' boundary="-----SECBOUND"'|| crlf ||
    crlf ||
-- add message body
    '-------SECBOUND'|| crlf ||
    'Content-type: text/html; charset=UTF-8'|| crlf ||
    'Content-Transfer-Encoding: base64'|| crlf ||
    crlf ||
    utl_raw.cast_to_varchar2(utl_encode.base64_encode(utl_raw.cast_to_raw(v_body)))||
    crlf ||
-- add csv attachment
    '-------SECBOUND'|| crlf ||
    'Content-Type: text/plain;'|| crlf ||
    ' name="excel.csv"'|| crlf ||
    'Content-Transfer_Encoding: 8bit'|| crlf ||
    'Content-Disposition: attachment;'|| crlf ||
    ' filename="excel.csv"'|| crlf ||
    crlf ||
    'CSV,file,attachement'|| crlf ||   -- Content of attachment
    crlf ||
    '-------SECBOUND--'                            -- End MIME mail
utl_smtp.Quit(v_mail_conn);
EXCEPTION
WHEN utl_smtp.Transient_Error OR utl_smtp.Permanent_Error then
    raise_application_error(-20000, 'Unable to send mail: '||sqlerrm);
END;
/

Hi,
I did not think the characterset and database would matter for this problem, but here is the info you requested.
The database is an Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bi
The characterset : NLS_CHARACTERSET     AL32UTF8
And i don't have a clue about the characterset of the operating system (not even sure what the operating system is), but i think that will be utf-8 aswell.
I'm not sure what i did, to come over as rude, but i didn't mean to and i apologize for it.

Problem with LONG FIELD

Similar Messages

Maybe you are looking for