Problem with MM Scheduling Agreement Inbound Delivery

Hello all Gurus,
I have a problem with inbound delivery. Whenever I am trying to create inbound delivery in VL31N with the total open quantity of MM scheduling agreement, I am getting a warning message as below
"Notified quantity less than goods receipt quantity".
If the quantity was less then 80, then I should get this message.
But the total open quantity in MM Scheduling agreement in ME38 is 80. So when I am creating the inbound delivery for 80, why system is giving me this warning message????
Kindly advise whether we have to maintain any settings anywhere or am I missing something here.
Thanks and Regards,
Umakanth.

Got the result.

Similar Messages

Problem in posting the goods receipt with reference to the inbound delivery

Hi All,
Below is the explanation of the scenario:
1. Materials are purchased (PO created in CAS as order unit) and inbound delivery document is created in cases as well.
2. When the TO is created for put away (we are performing put away using the hand held devices) the line item is split resulting in new line item number created
3. When the TO is confirmed the del quantity on the split line item is zeroing out and as a result the system is treating it as a service item with zero del quantity and is stopping from performing the GR with respect to the inbound delivery document
And also the inbound delivery is disappearing from the confirmation tab on the PO)
This is happening only with the materials which have an alternate unit set up in the material master (in this scenario CAS is the order unit and JAR is the base unit of measure)
Can some one help fix this?

Hi,
There is no standard option available and I don't think that there is any feasible way of stopping this without the use of a user exit (as already suggested).
But even the user exit option would be complex because it would have to block off the PO number field after enter (or any other key) was pressed.
It would also have to stop the use of multiple entries via the "find" option.
If you have a valid reason for doing this, have you thought of trying to get your users to do as they are told instead of changing the system?
Why is it important to have one PO per GR ?
Steve B

Dates and quantities copied from Scheduling Agreement to Delivery Order

Hi everybody,
we're experiencing a problem with copying control for dates/quantities between Scheduling Agreement and Delivery Order.
If we define a Forecast Delivery Schedule with more lines/dates into a Scheduling agreement, when I create a Delivery Order with reference to a specific date the system always copies the first forecast delivery schedule date, disregardful the date specified in the selection criteria for delivery creation and with the fact that this could have already been carried out.
Here's an example:
Forecast Delivery Schedule into Scheduling agreement:
(Date) 12.03.07   (Quantity) 10 TO
(Date) 13.03.07   (Quantity) 12 TO
(Date) 14.03.07   (Quantity) 15 TO
When delivery has to be created with reference to Scheduling Agreement, the system doesn't about the date specified in selection parameters (e.g. 14.03.07) and copies the quantity of the first forecast delivery schedule line (10 TO).
Does anybody knows how to maintain Copying Control for dates and quantities between Scheduling agreement to Delivery Order?
Thank you!
Luca

Dear Pattanaik,
check data transfer from copy controls.for this T-code is VTLA
here select your doc type and select details and check also item.check inside both types data trasfer wich is assigned change from this item to header.your problem may ve coming from here.
hope this will helps you
Prem

Problems in sending Scheduling Agreement Change using ORDCHG

Hi All,
I am having problem while sending Scheduling Agreement change from a source system to a target system using ORDCHG in ALE,
Its going to ORDERS and creating a fresh new Sales Order instead of creating ORDCHG idoc's & creating a new order only for the chages.
Please provide some inputs on what Messge Types can support Scheduling Agreement change to Sales Order change.
Regards
Rajendra.

Hi Pavan,
Thanks for ur suggestion.
I have tried with DELINS message type, the IDoc is getting created but in the receiver side the status always remains 51 with message Vendor XXXXX not saved for the customer YYYYY.
Thanks
Rajendra

Problems with Target service agreement

Problems with Target service agreement to repair my ipod nano. I have gone to the BBB. Who can I contact at Apple to let them know the poor service that Target gave with a Apple product?

Apple Customer Relations (800) 767-2775

Problems in transferring Scheduling Agreements from ECC to APO

Hi All
We are facing a strange problem in transferring scheduling agreements to APO.
When we create the integration model, it shows the selected scheduling agreements and vendors. On activating the integration model in CFM2 or CFM3, we do not get any error.
But when we check in APO, we do not see any scheduling agreements.
Can any one tell us what could be problem or where should we check to identify the issue ?
Best Regards
Mitesh

Hi Mitesh,
Did you try deleting all the integration models in CFM7 and trying again ? You could also try deleting the blocked queues in SMQ1.
Regards
Mukundan

Customer support says I can't make in-app purchases because of problems with terms and agreements. What can I do?

I can't make any in-app purchases anymore on my IPad. Customer support says its a problem with terms and agreements and they can't help me since they don' t know what it is. I can still buy on my PC and my old iPad just not my new one. I used to be able to buy but not anymore. Can anyone help me?

Click here and request assistance.
(80403)

Scheduling Agreement New Delivery Schedule With & Without Proposal

Hi Experts!
I had an issue regarding our scheduling agreements. Issue is below:
What is the difference between "New Delivery Schedule WITH Proposal" and New Delivery Schedule WITHOUT Proposal"?
Any responses will be greatly appreciated and points. Thank you for your time!!
Best Regards,
WC

In addition to the above post,
as you changed the date manually from 2nd to 3rd....
so there are was no report for 2nd generated ulitmately...and if generated it was changed...right...
so when you again run the mrp...the system will generate one more pr for the same article....
this ultimately happens because of the set del dates in the MMR as i told above..
Hope it helps..
Regards
Priyanka.P

Inbound Idoc with T-code: BORGR ( Inbound delivery create) EDI cannection

Dear all,
Kindly help me to create inbound delivery with BORGR transaction.
Here the we have to create the inbound delivery in the system with the help of vendor number and material without using Scheduling agreement number in BORGR
Please suggest the processing code and the function module required for the BORGR document posting.
I have done the following steps u2026but not able to post the dummy idoc through WE19 .
1. Use standard message Type DESADV (T code: WE81).
2. Use standard IDOC type DELVRY05 (T code: WE30).
3. Assign message type to IDOC Type ( Tcode: WE82).Message Type:-DESADV, Basic Type:-DELVRY05,Release 700
4. Use standard assignment of process code DELS with the message type DESADV ( Tcode: WE42)
5. Inbound Function Module : IDOC_INPUT_DESADV1 ( T code : WE57)
6. Define Port type File (Tcode: WE21) Port u2013 EDI_ASN Inbound Delivery.
7. Define Partner Profile (Tcode: WE20) Inbound Parameters.
8. Enhancement can be done in inbound IDOC as per the business requirement. Business has confirmed Field name wise Inbound IDOC data which will be received from vendor and all fields are available in the standard IDOC type DELVRY05.
Please help if anything more required for posting dummy idoc .
Thanks and regards,
koshti

Hi Dick,
just one additional hint as we had recently such problems :
It my happen that DESADV creates an inb.del w/o packing the HUs (idoc status is 'yellow' instead of 'red'). To avoid this OSS #912470 is the solution.
Kind Regards
Kay

Scheduling agreement - Direct delivery

Hi,
I am currently facing a challange where I have create a schedule agreement with a vendor who is providing raw materials directly to a subcontractor. My goal is to be able to do goods receipt using mvt 101 o and have the materials stored on a "Material provided to Subcontractor"-Storage loaction.
I am not able to create a Source list in the Vendor MRP area, but only in the plant MRP Area
I have done as follows:
Create a MRP area type 03-Vendor with ref to the subcontractor vendor number
Assigned the raw material to the MRP Area
Create a Scheduling agreement with out ret to any storage locations
When running MRP the schedule lines are created in plant MRP area ant NOT in the vendor MRP Area.
Please let me know how to assign a vendor MRP area in the source list.
Thanks again for your help.
Anders

Hello,
I've got a similar problem except that I don't manage MRP area for this specific plant. I would like that at GR the goods are received directly at the subcontractor's site in the stock provided to vendor (101 O).
For this :
- I have created the Scheduling agreement (LPA type) with delivery address flagged in item.
- The source list is fixed to the vendor with Scheduling agreement number and item (and same start date and finish date as in the contract).
- The material master has all information to let the schedule lines to be generated (lot size and planning calendar).
=> When I run the MRP it generates purchase requisitions instead of schedule lines, when the SC vendor is flagged in scheduling agreement.
When the SC vendor is not flagged in scheduling agreement, it works perfectly.
Is it a matter of customizing, or is there any other parameter to set ?
Thanks a lot for your help,
Regards,
Anna.

Scheduling agreement : No delivery schedule

I am facing a problem regarding scheduling agreement (it is through JIT delivery schedule)
where a line item shows a delivery scheduled for today, but when i got VL01N it shows an error "No schedule lines due for delivery up to the selected date. Message no. VL248
i've checked in MMBE & CO09, it shows the material as available.I dont see any material reservation also.
Any Ideas??

No schedule lines due for delivery up to the selected date
Message no. VL248
Diagnosis
There are no schedule lines due for the given order item up to the date chosen.
System Response
The system does not create a delivery item for this order item.
Procedure
Check whether the order item to be delivered contains confirmed schedule lines.
If this is the case, set the selection date further into the future if you still want to create a delivery for this item.
solution:
VL01N
Change the Selection date to another day.
<<-VL604 | | VL096->>
Download Link: Get the Password for the File

Scheduling agreement to Delivery Document

Dear All Gurus,
I am facing an issue, please advise it is the standard system functionality, if yes tell me the work around.
I have a schedulin gagreement with two schedule lines for say 23.03.2010 Qty 5, and 24.03.2010 Qty 5.
As per my business scenario fluctuation occur i deliveries.
on 23.03.2010 delivery change from 5 to 6 units system process is accordingly.
but when i see the scheduling agreement system have following satus
Date            Delivery Qty
23.03.2010      5
24.03.2010      1
when 24th of march still not come, system not only adjust the quantitywith te next date but also transfer the extra quantity to the next date.
and when i will start delivery for the 24.03.2010 system by default shows me the 4 qty.
If for the time being i accept it is the standard functionlity, and if some one ask me the qty delivery on 23.03.2010 system shows it 5, but as per senario actual quantity delivred is 6 on the 23rd march.
I want that system only call the schedule quantity, and if there is fluctuation system cater it against the same delivery date. new delivery date come fresh with its actual as per correct scheduling agreement.
Requesting you to pls try it from you end, and send me your valuable feedback.
Might have some issue in my system, or can tell the control area if any where i can cntrol it.
Looking for the prompt response.
Regards,

Dear All,
Same i have tried to another system, its like standard functionality..
but, suggest me the work around if any or have any control in customizing....
Regards.

Scheduling Agreement to Delivery

Dear All,
I am using scheduling agreement and explode the BOM in it, with LUMF (TAP) TAN and TAN.
In scheduling agreement I assign schedule line for all the items including 1 main, 2 and 3 for sub item.
When i create delivery same will be copy accordingly to the delivery document and priceing will calculate fine...
But when i create deivery after saving first delivery document, let say create delivery for 17.03.2010 and than create for 18.03.2010 system only call the sub items on the delivery document ????
give me your value added feedback at your earliest.
Regards

repost the question in detail again.
Thanks

Scheduling agreement, unnecessary delivery schedule lines

Hello
We use Scheduling agreements for purchasing spare parts. The MRP run checks the warehouse requirements and creates delivery schedule line to scheduling agreement.
Now the MRP run creates unnecessary delivery schedule lines to scheduling agreement if the earlier created delivery schedule line's delivery date has been changed manually.
For example,
Today the MRP run finds requirement for one article and creates the delivery schedule line, where delivery date is 2.9.2008 (determined from articles basic data).
The Vendor confirms the delivery date as 3.10.2008 and the purchaser changes manually (transaction ME38) the delivery date to delivery schedule line accordingly and prints the created message.
The next MRP run creates new delivery schedule line, where delivery date is again 2.9.2008.
now there are two open delivery schedule lines for this article with delivery dates 3.10.2008 and 2.9.2008.
Why the MRP run does not notice the existing delivery schedule line with the new delivery date 3.10.2008?
we have changed delivery dates manually several years and this has never happened before.
could you please help me to resolve this.
Thanks in advance,
Srikanth

In addition to the above post,
as you changed the date manually from 2nd to 3rd....
so there are was no report for 2nd generated ulitmately...and if generated it was changed...right...
so when you again run the mrp...the system will generate one more pr for the same article....
this ultimately happens because of the set del dates in the MMR as i told above..
Hope it helps..
Regards
Priyanka.P

What is the difference between scheduling agreement and delivery schedule

Hi
1. Can anyone explain me the difference between scheduling agreement output
    and scheduling agreement delivey schedule
    Will the both look same in T.code SP02 when seeing the output for a document.
    Can anyone send me T.codes for above ones in purchasing.
2. when seeing the Detailed statement for rebate agreement,there is item number.
    In which table can we see the item number for rebate agreement

Hi,
If you have to deal with more complex situations, you can define a delivery cycle in the material master record in addition to the planning cycle. In so doing, you determine the days on whichthe vendor delivers his goods. The delivery cycle is entered in the material master record as a planning calendar in the Planning calendar field.
You enter a delivery cycle if the delivery date (or the goods receipt date) depends on the day on which you order the goods. For example, you carry out the planning run and place your orders on Mondays and Tuesdays. If you place the order on Monday, the delivery is made on Wednesday, if you wait until Tuesday to place the order, the delivery is not made until Friday
Where as Planning calander is Three character number (numeric or using letters) that specifically identifies a PPS-planning calendar. The difference between Planning calender and delivery cycle is If you have selected the MRP type "MRP" and have set a period lot-sizing procedure according to planning calendar, you enter here which planning calendar is to be used.
If you selected the "time-phased planning" MRP type, the planning calendar that you specify here defines the delivery cycle. This specifies the days on which the vendor delivers the material. You can enter the planning cycle in addition to the delivery cycle

Problem with MM Scheduling Agreement Inbound Delivery

Similar Messages

Maybe you are looking for