PROBLEM WITH MY DATE BETWEEN CLAUSE IN SELECT QUERY

WHEN I RUN THE CODE IT'S FETCHING DATA FROM 2007,2008,2009.
SELECT ERDAT VBELN NETWR
FROM VBRK INTO CORRESPONDING FIELDS OF TABLE IT_VBRK
WHERE ERDAT BETWEEN '01.11.2008' AND '30.11.2008'.
PLEASE GIVE ME A SOLUTION GUYS.

Hi, Zubaer,
Please Don't Use All Caps in Subject and Body Text too
Have a look at [Rules of Engagement|https://www.sdn.sap.com/irj/scn/wiki?path=/display/home/rulesofEngagement]
Under Heading
- Use a Good Subject Line
Do not use words in capital letters
Use the following way. it will solve out your Problem,
SELECT erdat vbeln netwr
FROM vbrk INTO CORRESPONDING FIELDS OF TABLE it_vbrk
WHERE erdat BETWEEN '20081101' AND '20081130'.
Best Regards,
Faisal

Similar Messages

Between Clause in select query

In the selection screen, i enter April month i.e. 04. Now i have to go 5 months back i.e. November i.e. 11. Now from table T247, I want to select data from November to April. Ho do i do it.

Hi,
If you want you can also use BETWEEN clause in select condition.
Example :
DATA: LOW TYPE I VALUE '04',
HIGH TYPE I VALUE '11.
SELECT FIELDS.....
FROM TABLE
INTO TABLE ITAB
WHERE PARAMETER BETWEEN LOW AND HIGH.
This will help you.
Plz reward if useful.
Thanks,
Dhanahsri.
Edited by: Dhanashri Pawar on Jun 18, 2008 11:52 AM
Edited by: Dhanashri Pawar on Jun 18, 2008 11:53 AM

Facing problem with a date column in select query

Hi,
I am facing problem with a date column. Below is my query and its fainling with " invalid number format model" .
Query: SELECT *
FROM EMP
WHERE trunc(LAST_UPDATED) >= to_date(to_char(22-05-2009,'dd-mm-yyyy'),'dd-mm-yyyy')
LAST_UPDATED column is "DATE" data type.
Please help me Thanks

Radhakrishna Sarma wrote:
SeánMacGC wrote:
WHERE LAST_UPDATED >= to_date('22-05-2009','dd-mm-yyyy');
You do not need the TRUNC here in any case.
I don't think so. What if the user wants only data for 22nd May and the table has records with date later than 22nd also? In that case your query willl not work. In order for the Index to work, I think the query can be written like this I think Sean is right though. Use of TRUNC Function is quiet useless based on the condition given here, since the to_date Function used by OP will always point to midnight of the specified date, in this case 22-05-2009 00:00:00.
Regards,
Jo
Edit: I think Sean proved his point... ;)

HT1296 I have a problem synching calendar data between my iPhone 3GS iOS 5.1 & Outlook 2007 on MS7. The basic calendar is OK but the birthdays (little box icon) are a day early & cannot be changed to the correct date. How can I fix this?

I have a problem synching calendar data between my iPhone 3GS iOS 5.1 & Outlook 2007 on MS7. The basic calendar data transfer is OK but the birthdays (little box icon) are a day early & cannot be changed to the correct date. The birthday entries in my Outlook contacts have correct dates.How can I fix this?

The following peocess corrects the calendar entry:
edit the contact & change the birthday, save the change; edit the contact & change the birthday to the correct value, save the change again. The calendar entry then displays on the correct date. Alternatively as a temp solution I can just de-select the "birthdays" calendar which stops the icon being displayed.
Thanks for your advice, I think that it's n going to be a slow process to fix all the entries for not much return.

PSP: problems with viewing data

Hello.
I'm currently working at on-line shop and have some problems with viewing data from database. When there is no much inserts to table its working very well. But after inserting all Inserts I have its acting weird.
Sample with 10 INSERTS:
http://gafgarion.atspace.com/psp/1.jpg
Sample with 100 INSERTS:
http://gafgarion.atspace.com/psp/2.jpg
I'm using Oracle 9i. when I have more data in my database its acting weird. There is SELECT only from one table, but sometimes I have data from other tables aswell.
I didnt touch any config files or something else. Only created new User and DAD.
any ideas what should I do to fix that ??
thnx in advice

Hello,
My guess is that you are speaking about PLSQL Server Pages (PSP), and the PLSQL Web Toolkit.
This is why I do not think that you will have lot of answer since this forum is targeted toward Web Services developer (XML, SOAP, and so on)
I am inviting you to ask your question on the general Oracle Application Server - General or PLSQL forums.
Regards
Tugdual Grall

Problems with retrieving data from tables with 240 and more records

Hi,
I've been connecting to Oracle 11g Server (not sure exact version) using Oracle 10.1.0 Client and O10 Oracle 10g driver. Everything was ok.
I installed Oracle 11.2.0 Client and I started to have problems with retrieving data from tables.
First I used the same connection string, driver and so on (O10 Oracle 10g) then I tried ORA Oracle but with no luck. The result is like this:
I'm able to connect to database. I'm able to retrieve data but from small tables (e.g. with 110 records it works perfectly using both O10 and ORA drivers). When I try to retrieve data from tables with like 240 and more records retrieval simply hangs (nothing happens at all - no error, no timeout). Application seems to hang forever.
I'm using Powerbuilder to connect to Database (either PB10.5 using O10 driver or PB12 using ORA driver). I used DBTrace, so I see that query hangs on the first FETCH.
So for the retrievals that hang I have something like:
(3260008): BIND SELECT OUTPUT BUFFER (DataWindow):(DBI_SELBIND) (0.186 MS / 18978.709 MS)
(3260008): ,len=160,type=DECIMAL,pbt=4,dbt=0,ct=0,prec=0,scale=0
(3260008): ,len=160,type=DECIMAL,pbt=4,dbt=0,ct=0,prec=0,scale=1
(3260008): ,len=160,type=DECIMAL,pbt=4,dbt=0,ct=0,prec=0,scale=0
(3260008): EXECUTE:(DBI_DW_EXECUTE) (192.982 MS / 19171.691 MS)
(3260008): FETCH NEXT:(DBI_FETCHNEXT)
and this is the last line,
while for retrievals that end, I have FETCH producing time, data in buffer and moving to the next Fetch until all data is retrieved
On the side note, I have no problems with retrieving data either by SQL Developer or DbVisualizer.
Problems started when I installed 11.2.0 Client. Even if I want to use 10.0.1 Client, the same problem occurs. So I guess something from 11.2.0 overrides 10.0.1 settings.
I will appreciate any comments/hints/help.
Thank you very much.

pgoel wrote:
I've been connecting to Oracle 11g Server (not sure exact version) using Oracle 10.1.0 Client and O10 Oracle 10g driver. Everything was ok.Earlier (before installing new stuff) did you ever try retrieving data from big tables (like 240 and more records), if yes, was it working?Yes, with Oracle 10g client (before installing 11g) I was able to retrieve any data, either it was 10k+ records or 100 records. Installing 11g client changed something that even using old 10g client (which I still have installed) fails to work. The same problem occur no matter I'm using 10g or 11g client now. Powerbuilder hangs on retrieving tables with more than like 240 records.
Thanks.

Problem with universal data cleanse

I have problem with universal data cleanse.
I am using DS 3.2.x (12.2.2).
I created:
Dictionary: TEST
Classification: TEST_CL
Custom outputs: category: TEST_CAT
Dictionary Entry:
Primary: BO
Classification: TEST_CL
Gender: Unassigned
Secondary information:
When used as: TEST_CAT
Standard: Business Objects
Rule file:
DataCleanse Rule File v2.0;
TEST_CAT = TEST_CL;
action = TEST_CAT;
TEST_CAT = 1 : TEST_CAT : 1;
end_action
Data Cleanse:
Input: Multiline1
Options:
Parsing Dictionary: TEST
Rule file: .../test_rules.dat
Break On Whitespace Only: Yes
Parser Sequences Multiline1: TEST_CAT
Output:
Parent_component: TEST_CAT1
Generated_field_name: TEST_CAT and RULE_LABEL
Generated_field_class: parsed/standardized
Contenet_type: none
and EXTRA field
I wanted to replace word u201CBOu201D with the standard words u201CBusiness Objectu201D, but I have result: there is "BO" in the extra field,
there are "null" in others fields.
What am I doing wrong?
Thanks for all help!
P.S. I don't have cleansing packages installer.

There seem to be a couple of things going on here:
1. If you are using your custom dictionaries, then you have to map your input to MULTILINE1 and enable the custom parsers - just something to be aware of
2. You mentioned that you made some changes to the existing dictionary and you are not seeing any changes. To be clear, do you have different TEST and PRODUCTION environments? Or is it the same environment except that you have a local DS repository and for the dictionary you are pointing to another repository (using Dictionary --> Manage Connections)?
Having the dictionaries on a different repository should not make any difference as long as you point to them in your designer using the Dictionary --> Manage Connection option.
So I think there may be some issue with your job setup and/or dictionary values need to be looked at. You can start by adding another output field named "EXTRA" to see whether or not your data is getting parsed at all. Also, make sure the entry "CLEANME" is classified as FIRM_NAME_ALONE in the dictionary and that you are selecting the correct dictionary name in the Datacleanse Transform options.

Problem with order data

Hi, I have a problem with order data. A string column has these values:
A....
B....
PSTA-FRA
PSTA+FRA
Q....
R....
If i order data directly from db ( select column1 from table order by column1 ) , i obtain this result:
PSTA-FRA
PSTA+FRA
If i create a simple report on that table and order on that column the result is:
PSTA+FRA
PSTA-FRA
I can obtain correct output if I set parameter 'Perform group on server' but if i write a selection formula :
{table.column} >= 'PSTA+FRA'
record containing PSTA-FRA value not appear.
I've tried both with Crytal 8.5 and Crystal 11 R2 sp6, database is Sybase SQL Anywhere odbc connection.
Thanks in advance

Ordering is done according to the ASCII values of the characters.
In R2 create a new report and log onto your DB and select Command for your data source. Paste in the SQL you use to get the data in the order the server users. Then you don't have to use CR to do the sorting. DB Servers are much more efficient at collecting the data than CR is.
Thank you
Don

PLSQL Server Pages (PSP): problems with viewing data

Hello.
I'm currently working at on-line shop and have some problems with viewing data from database. When there is no much inserts to table its working very well. But after inserting all Inserts I have its acting weird.
Sample with 10 INSERTS:
http://gafgarion.atspace.com/psp/1.jpg
Sample with 100 INSERTS:
http://gafgarion.atspace.com/psp/2.jpg
I'm using Oracle 9i. when I have more data in my database its acting weird. There is SELECT only from one table, but sometimes I have data from other tables aswell.
I didnt touch any config files or something else. Only created new User and DAD.
any ideas what should I do to fix that ??
thnx in advice

Hello,
My guess is that you are speaking about PLSQL Server Pages (PSP), and the PLSQL Web Toolkit.
This is why I do not think that you will have lot of answer since this forum is targeted toward Web Services developer (XML, SOAP, and so on)
I am inviting you to ask your question on the general Oracle Application Server - General or PLSQL forums.
Regards
Tugdual Grall

I have a problem with the sync between iTunes and ipad2. I can not see the files in iPad. Help me please.

I have a problem with the sync between iTunes and ipad2. I can not see the files in iPad. Help me please.

Cannot see what files ? Music (synced music should appear in the iPod app), films/TV shows (Videos app), documents ... ?

Problem with Java Dates and UPDATE for SQL2000

I am having problems with the date formats for Java. I am trying to put the current date time into a SQL table, here it the code I am using:
var Today = new Date()
var conn = Server.CreateObject( "ADODB.Connection" )
conn.Open( "Provider=SQLOLEDB;Server=(local);Database=BillTracking;UID=sa;PWD=;")
var sql = "UPDATE BillAssignments SET DatePosted = " + Today + " WHERE AssignmentID = '" + Request.QueryString("AssignmentID") + "'"
var rs = conn.execute(sql)
I keep getting different errors and I have been unable to find a solution yet. I know that I need to change the date format from the Java standard to the one that SQL likes.
Help....
Norm...

Please tell us where the Java part of this comes in. I see that you are using JavaScript to load up data via an ADO connection (presumably on an IIS platform) - but I do not see where you are using Java
Lee

Problem with billing date at closed period

Hi
We have a problem with billing date in transaction . Previously we could set up different (earlier) billing date than the actual posting period and now it is not working. We receive an error message that the posting period is closed ) .
I attached an example invoice which we managed to post and where you can see what Iu2019m thinking about, parking number: 1024337, BILLING DOCUMENT: 841835. In this case the billing date was at 30.11.2007, but the posting in 15.07.2008 and we managed to post.
Pls help that issue
yps

hi,
it is due to posting period closed for the month of 07/2008.
u need to open posting during that period.
Regards,
Greeshma

Problems with Dinamic Link between Premiere pro CC and After Effects CC

I'm having serious problems with dinamic link between premiere pro and after effects, really serious problems that have 2 big projects in trouble (a documentary and a video clip) and I had to redo all the work pipeline to the consumer.
The documentary for a spanish TV was made on CC 2014 and a video clip was made on CC. Both of them with a lot of after effects composition in the premiere pro timeline. Render freeze, a lot of playback issues, and many more problems... Until I decided to remove these links between premiere and after effects and render out all the after effects compositions one by one and insert as clips in premiere pro. 1 week working away with back and fourth.
I've got a huge workstation:
i7 4990
32Gb ram
GTX780 3gb
256 gb system ssd
2 Tb project storage
*All my hardware and software are update.
I know that a lot of folks are on the same huge problem and I want to ask everyone:
How do you save this?
What is your pipeline?
Are there any solution?
Best practice to use dinamic link in a huge project?
Thanks,
Ruben Gimenez.
R&D iceblink.es
www.rambot.es

Thank You, Jim -
Unfortunately that specifically did not work.
Based on another comment sent to me, here is what did.
In PProCC
File > Adobe Dynamic Link > New After Effects Composition
In AECC
From that composition created from PPro, I imported the project (aep) initially created in AECC from another team member. Saved the file.
Back in PProCC
File > Adobe Dynamic Link > Import After Effects Composition
Magic.

Problem with loading data to Essbase

Hi All,
I have a problem with loading data into Essbase. I've prepared maxl script to load the data, calling rule file. The source table is located in RDBMS Oracle. The script works correctly, ie. generally loads data into Essbase.
But the problem lies in the fact, that after deletion of data from Essbase, when I'm trying to load it again from the source table I get the message: WARNING - 1003035 - No data values modified by load of this data file - although there is no data in Essbase... I've also tried to change the mode of loading data from 'overwrite' to 'add to existing values' (in rule file) but it does'nt help ... Any ideas what can I do?

Below few lines from EPM_ORACLE_INSTANCE/diagnostics/logs/essbase/dataload_ODL.err:
[2013-09-24T12:01:40.480-10:01] [ESSBASE0] [AGENT-1160] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1116830016] Received Validate Login Session request
[2013-09-24T12:01:40.482-10:01] [ESSBASE0] [AGENT-1001] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1114724672] Received client request: Get App and Database Status (from user [admin@Native Directory])
[2013-09-24T12:01:54.488-10:01] [ESSBASE0] [AGENT-1001] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1101564224] Received client request: MaxL: Execute (from user [admin@Native Directory])
[2013-09-24T12:01:54.492-10:01] [ESSBASE0] [AGENT-1001] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1115777344] Received client request: MaxL: Describe (from user [admin@Native Directory])
[2013-09-24T12:01:54.492-10:01] [ESSBASE0] [MLEXEC-2] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1115777344] Output columns described
[2013-09-24T12:01:54.494-10:01] [ESSBASE0] [AGENT-1001] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1102616896] Received client request: MaxL: Define (from user [admin@Native Directory])
[2013-09-24T12:01:54.494-10:01] [ESSBASE0] [AGENT-1001] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1102616896] Received client request: MaxL: Fetch (from user [admin@Native Directory])
[2013-09-24T12:01:54.494-10:01] [ESSBASE0] [MLEXEC-3] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1102616896] Record(s) fetched
[2013-09-24T12:01:54.496-10:01] [ESSBASE0] [AGENT-1001] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1116830016] Received client request: MaxL: Fetch (from user [admin@Native Directory])
[2013-09-24T12:01:54.498-10:01] [ESSBASE0] [AGENT-1160] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1114724672] Received Validate Login Session request
[2013-09-24T12:01:54.499-10:01] [ESSBASE0] [AGENT-1001] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1101564224] Received client request: Get Application State (from user [admin@Native Directory])

Problem with the date conversion

Hi Friends,
i am facing the problem with the date conversion, Actuall my requirement is to pass the date to the screen based on the user setting roles(SU01).
I have fetched the user setting date format by using the funciton module SUSR_GET_USER_DEFAULTS, The function module picks the exact user date setting (Like as MM/DD/YYYY, MM.DD.YYYY, DD.MM.YY).
After that i have implemented the FORMAT_DATE_4_OUTPUT funciton module for converting of the user role setting date format into system date format.
for the english language case the funciton module FORMAT_DATE_4_OUTPUT works fine but the funciton module not supported for other languages
Can you please provide the Function Moudle for user setting date conversion.
The funciton module is most important for us,
Thanks
Charan
Moderator message: date conversion questions = FAQ, please search before posting.
Edited by: Thomas Zloch on Dec 21, 2010 2:19 PM

Hope this logic helps you.
DATA LF_DATE TYPE DATS VALUE '21122010'. " 21-dec-2010
DATA LF_DATE_BI(10).
WRITE LF_DATE TO LF_DATE_BI. "Now LF_DATE_BI contains the date in user format
"Now populate the value LF_DATE_BI to the screen field

PROBLEM WITH MY DATE BETWEEN CLAUSE IN SELECT QUERY

Similar Messages

Maybe you are looking for