Multiple Report print out on Check box click
Hi,
I am using version apex_3.2.
I have created Report and define check box in report. i want to give print functionality on check box. As i tick multiple invoices from report and click on print link defined below to the report, Selected Invoices should be printed. How i can do this?
Thanks & regards
Vedant
Hello Vedant,
<li> Do you already have a report that will accept multiple invoice numbers as input and generate required "Invoice Report" for you?
<li> If Yes - Are you looking to generate URL based on user check-box selection? If so, please provide sample URL format which will accept multiple invoice numbers.
<li> If No - I think first you should create such report (I have limited knowledge on Oracle Reports though)
Regards,
Hari
Similar Messages
-
How to capture check box click in ALV
Hi,
I have requirement in which after displaying the ALV out put, immediately when the check box is checked i need to capture it and proceed with further coding with that input.
Check box click is not getting captured in "USER COMMAND or LINE SELECTION"
Could you please suggest a way.
Regards
venkatesh.Venkatesh,
If you are using cl_gui_alv_grid you need to register "change" event to catch the checkbox change.
you do so with this method of cl_gui_alv_grid class :
register_edit_event( i_event_id = cl_gui_alv_grid=>mc_evt_modified ).
event handler class
class lcl_event_receiver definition.
public section.
methods:
user_command for event user_command of cl_gui_alv_grid
importing e_ucomm, "#EC NEEDED
data_changed for event data_changed of cl_gui_alv_grid
importing er_data_changed e_onf4 e_onf4_before e_onf4_after e_ucomm,"#EC NEEDED
endclass.
global data
data: o_event_receiver type ref to lcl_event_receiver.
data: goo_grid type ref to cl_gui_alv_grid.
At the displaying of your grid / register the change event and set handlers
goo_grid->register_edit_event( i_event_id = cl_gui_alv_grid=>mc_evt_modified ).
set handler:
o_event_receiver->user_command for goo_grid,
o_event_receiver->data_changed for goo_grid.
hope this helps...
regards -
Want Print Priview of check box on smart forms
Hi Expert,
I want Print Priview of check box on smart forms.
I get the checkbox symbol when i give the print out but it not show in priview.
So pls suggest how it show in print priview.
Thanks & Regards
SwatantraPathakHi,
If you used the symbols then you cannot see the print preview of the checkboxes. This can seen in the print. If you want to have the print preview of checkbiex you have to create the Window of same size as check size and place it where you required. This cannot be possible with symbols -
Crystal Report Print Out Template
Hi Dear;
How can i create or from where can i Get Crystal report print out template for sales and purchasing Documents in SBO 8.8
best regards;Link for documentation of B1 8.8
https://websmp104.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000680297&_SCENARIO=01100035870000000183&_ADDINC=011000358700002837782005E&
Thanks
Krish -
Hi! I am newbie to Reports need help with check boxes
Hi! I am newbie to Reports need help with check boxes. I am try-in to make a new check boxes that will validate in runtime. I have created two frames and one frame is dummy and other frame has big X line on it with conditions. Is this a right way to create check box! Please help thanks!
and one frame is dummy and other frame has big X
line on it with conditions. Is this a right way to
create check box! Please help thanks!Instead of creating a frame for X, you can create Ractangle and place X in it. Rest is fine. -
Does OIM Provides Orphan Accounts report generation Out of the Box ???
Hi All ,
Does OIM Provides Orphan Accounts report generation Out of the Box ???Nopes, OIM Doesn't.
Custom Report
Re: How to generate a report on 'Event Received' events for a resource objects
http://download.oracle.com/docs/cd/B32386_01/generic.902/b32137/reporting.htm -
Hi,
I have developed a ALV report .
I also want to take the print out of this report.
How can i do this.Hi,
Refer this code
DATA : wa_variant TYPE disvariant, "Work area for variant
wa_variant1 TYPE disvariant, "Work area for variant
wa_layout TYPE slis_layout_alv, "Work area for layout
wa_print TYPE slis_print_alv, "Work area for print
*& Form sub_alv_display *
This form displays the output using REUSE_ALV_GRID_DISPLAY *
function module *
FORM sub_alv_display .
*--Local Internal Table
DATA : li_sort TYPE slis_t_sortinfo_alv.
*--Define print list
wa_print-no_print_listinfos = c_chk.
wa_print-no_coverpage = c_chk.
*--If the No zero stock lines is checked in the selection screen
IF p_sline IS NOT INITIAL.
DELETE i_final WHERE einme = c_zero.
ENDIF.
IF NOT i_final[] IS INITIAL.
*--Call the function module to display the ALV report
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = v_repid
is_layout = wa_layout
it_fieldcat = i_fieldcat
i_default = c_chk
i_save = c_save
is_variant = wa_variant
it_events = i_events
is_print = wa_print
it_sort = li_sort
TABLES
t_outtab = i_final
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ELSE.
*--No data found for the given selection criteria.
MESSAGE i001.
LEAVE LIST-PROCESSING.
ENDIF.
ENDFORM. "sub_alv_display
Regards,
Prashant -
Acrobat 9-forms-Radio buttons print different than check boxes
I am using Acrobat Pro 9 to create forms.
I've used both radio buttons and check boxes (that are circles).
Forms were designed in InDesign with Zapf Dingbats as the open circles to be filled in.
I used radio buttons when the user had to pick one over the other.
I used check boxes when there were multiple choices or I wanted the user to be able to uncheck a box. (I used the circle style so they would look like radio buttons).
The radio buttons are printing differently than the check boxes. It looks almost like there is an overlay on top of the actual open circle created by Zapf Dingbats.
I checked the "appearance" window and there is no border or fill color on the radio buttons (same for the check boxes).
Under the <general> tab, <common properties> is visible. I'm assuming it should be in order for the radio button to appear on the form.
I would appreciate any input as to how to fix this.
Thansk!
MaureenThat's just the way radio buttons are, and one reason I rarely use them in preference to check boxes. If Adobe wanted to, they could allow you to use any appearance you want for both the selected an unselected state of a check box or radio button, but they've actually further restricted your options over the years.
-
Delete multiple record in tabular with check box.
Hello guys,
I need your suggestion..
I have master detail block. (INSTRUCTOR and SECTION)
At detail block, I add check box item (name: RB_SECTION_ID) with Database Item "No", and value when check :SECTION_ID (on the property).
I make a button DELETE. The trigger was DELETE from SECTION where section_id = :SECTION.RB_SECTION_ID and
instructor_id = :INTRUCTOR.INSTRUCTOR_ID;
but It not work.
How we delete multiple record by check multiple check box then click DELETE button..??
Regard.
Nia..You datablock in the form cannot automaticaly refresh the changes you make with the SQL statements.
For that you need to explicity call certain built-ins to refresh the data
execute_query(no_validate) --> fetches the available data for that session. Here you deleted some records, so those records will not be available until you do a rollback in the same session(i.e, you exit the form without saving). But until you save, those deleted records will be avaiable for the users in other sessions)
Also, your code works only because the records you deleted are all already saved ones.
So it will be a good practice to use built-in of form builder rather than DML stmt.s
Here you can do like this
begin
go_block('TRY_TABLE');
first_record;
loop
if :TRY_TABLE.CCKBOX = 'Y' THEN
delete_record;
END IF;
NEXT_RECORD;
EXIT WHEN :SYSTEM.LAST_RECORD = 'TRUE';
END LOOP;
END;
If your code is like above one, you can revert your deletion by simply giving a F7 (enter-query) and F8 (xecute query). -
Pie chart out of check boxes table
Hi,
Another thing that is bugging me! I have a few tables with check boxes. I would like to make a pie chart out of the false/true conditions of the check boxes in the table. My pie chart always results in a 100% value, no matter what the check boxes values are.
Any idea?Hi Steve,
If you attempt to chart the checkboxes directly, you'll get either 100% or as many equal slices as you have boxes checked (eg. with seven checked boxes, you should see seven equal slices, each labeled "14%"). Probably not what you want.
My interpretation (an example):
You have a table with 10 checkboxes, in cells B2:B11, 7 of them checked and 3 unchecked.
You want a pie chart that will show the portion checked (70%) and the portion unchecked (30%).
To get this, you'll need to generate some numbers.
In C2, enter: =1*B2
When you click Accept (or press return or tab) you will get a blue triangle alerting you that "The formula uses a Boolean in place of a number." Click the Ignore button.
Fill the formula down to C11. As you do so, you should see a 1 in the cell beside each checked box and a 0 in the cell beside each unchecked box.
In C13, enter: =SUM(C2:C11)
In C14, enter: =10-C13
In B13, enter: Checked
In B14, enter: Unchecked
Select B13..C14, then choose the pie chart from the list under the Chart button.
If the resulting chart shows 100%, click the box mentioned in Ashka's post.
Regards,
Barry -
How to select multiple row of table using check box?
hi,
i am having table on view having first field as checkbox. what i want, when i click on checkboxes in multiple rows, and i click on any button i need to use those content to next view...
my problem is if i select only one row , i can use onlead select property of table..but when i select multiple rows through check box how should i read contents of table....?
Plz solve it.
Thanks,
Saurin ShahHello Saurin,
You are right using LeadSelection you can select only 1 row at a time. You will have to make use of Selection for achieving this. First you will have to change the selection mode of the table to multiple & also change the selection property for the related context to 0..n . Please find a code extract which might help you. (However this facility is only available from SP 14.) The main part is using the set_selected method of if_wd_context_node.
data: node_zcourse_details type ref to if_wd_context_node,
node_course_assign type ref to if_wd_context_node,
elem_course_assign type ref to if_wd_context_element,
stru_course_assign type if_v_details=>element_course_assign ,
item_popin_selected like stru_course_assign-popin_selected.
" navigate from <CONTEXT> to <ZCOURSE_DETAILS> via lead selection
node_zcourse_details = wd_context->get_child_node( name = if_v_details=>wdctx_zcourse_details ).
" navigate from <ZCOURSE_DETAILS> to <COURSE_ASSIGN> via lead selection
node_course_assign = node_zcourse_details->get_child_node( name = if_v_details=>wdctx_course_assign ).
" @TODO handle not set lead selection
if ( node_course_assign is initial ).
exit.
endif.
data elem_set type wdr_context_element_set.
field-symbols <wa_elem> like line of elem_set.
elem_set = node_course_assign->get_elements( ).
loop at elem_set assigning <wa_elem>.
<wa_elem>->set_selected( TRUE OR FALSE ). " Supply either TRUE/FALSE in here
endloop. -
Page print options with check box selected.
I'm developing a small catalogue of forms, not all of which I want to print after they're produced. I work in a hospital, and prepare patient data forms (up to 24) based on the patient room, or bed. I would prefer to not print the form of the bed if it's empty (no patient registered there). What I had in mind was including a check box on each of the forms, and the form, or forms, (pages) with a check box checked would not print. Thanks for any suggestions.
Hi Dana,
You may double check this user's default under the user profile to find out anything that is different from other users.
Thanks,
Gordon -
Hi Experts,
I am having problem while taking print out of Alv report format. In that report, 1 column contains Unit Values.
Eg. Unit value - 'LE' , AFTER USING CONVERSION EXIT LOGIC it is converted into 'AU' which is finally displayed in the Alv -Report display format.
while taking Print-out of that report , that field Unit Value 'AU' is Shown in this format "****'.
Please give me your Valuable Suggestions.
Thanks and Regards
BalaNarasimman Mwhile defining filed catalog define the data type also
clear l_fieldcat.
l_fieldcat-fieldname = 'MEINS'.
l_fieldcat-datatype = 'UNIT'.
l_fieldcat-no_out = ' '.
l_fieldcat-do_sum = 'X'.
l_fieldcat-seltext_l = 'UOM'.
append l_fieldcat to p_fieldtab.
may be it would help.
anya -
How to handle check box click in ALV grid
Hi Experts,
I use ALV grid using FM.
I have list of delivery note items with one custom field as check-box. When I check the checkbox, all other lines related to the same delivery note should be automaticaly checked.
Is there any event or function code, where I can handle single click to checkbox?
Thanks®ards,
JirkaHI
you can use following code in user command function .
DATA :BEGIN OF IT_MAINDATA OCCURS 0,
MAINDATA(1),
IT_RD1(1),
END OF IT_MAINDATA.
data: V_INDEX TYPE I.
DESCRIBE TABLE itab LINES LINE.
DO. " line times.
READ LINE SY-INDEX FIELD VALUE Iitab-RD1.
IF SY-SUBRC NE 0. EXIT. ENDIF.
CHECK V_INDEX > 0.
CHECK itab-RD1 = 'X'.
MODIFY itab INDEX V_INDEX.
IT_MAINDATA-IT_RD1 = Iitab-RD1.
ENDDO.
i think is work.
regards,
Abhi -
Print Out of Check List In Maintenance Order.
Hi All
I just added one checklist to the Long Text in the tasklist of an equipment.
In the checklist there are some tabular cloumns, lines, square box, etc...
But when i take a print out of the checklist/Orerations from the maintenance order the tabular cloumns, lines, square box, etc...
are not shown in the print out.
Pls. Suggest some way of adding the checklist with tabular cloumns, lines, square box, etc...
VenkatVenkat,
Long text doesn't support table formats.
You could get around it by having those fields maintained as characteristics and then generating a table while printing forms with that data using Adobe forms, smartform or sap script.
If you would still like to maintain the same in long text, it can be done by drawing vertical and horizontal lines using "|" AND "_" .Its tedious and ugly process, but you could get what you want.However the you may have to go through a iterative process to get the format right. It would be easier if there were just two columns.
Regards
Narasimhan
Maybe you are looking for
-
My Firefox was not working, so I deleted it and planned to reinstall it. I downloaded Firefox using Safari. When I try to reinstall, I get the above message.
-
Hi experts, SAP requested system code for remote access to my BW system. Can anybody tell me what is system code? Thanks in advance. Sharat.
-
HT6378 How to upload iPhoto library into iCloud Photo library?
Hi, I am having a MBP mid 2012 w/ Yosemite along w/ iPhone and iPad, all running 8.1. After having upgraded all devices to latest version, I wonder how do you get now the Mac iPhoto library into iCloud Photo library? iCloud Photo Library setting has
-
I cannot access my raw images from my Nikon d5300 in PSE12.
From the website, it states that PSE12 would be compatible with camera raw plug in through version 8.3, which my camera requires. The error I get when trying to open in PSE 12 states that the file I am trying to open appears to be from a camera that
-
I accidentally screwed up my apple id when trying to change my primary email address. Password recovery options and security questions arent working either to restore. Created a new appleid just to get into forums to ask a question but hesitate to sy