Problem with my tabular form report repeating columns

hello,
i have a problem like, I have created a tabular form report and I have just copied the page to an another new page in the same application.
once i copied the page to a new page, and when i tried to run the report the columns are repeating. I ahve seen the report attributes, in the new page they were repeating. I am not able to understand what might be the problem.
can anyone plz sort it out this problem.
thanks.

hi,
Copy page will never repeat columns anywhere in page ... this s just a suggestion..
delete the new page and try once again the copy of Tabular form page. if still come problem then we can solve it by some other way !
Thanks
Mark Wyatt

Similar Messages

Issue with APEX_ITEM.CHECKBOX in Manual Tabular Form report

Hi,
I have a simple manual tabular form report with query :
SELECT
APEX_ITEM.CHECKBOX(1,order_id) ,
APEX_ITEM.TEXT(3,Ord_number) ,
APEX_ITEM.TEXT(4,ord_flag)
from
tbl_order
and a process to update the value of Ord_number & ord_flag columns for the selected (Checked) rows.
FOR i in 1..apex_application.g_f01.count
loop
UPDATE
tbl_order
SET
Ord_number = apex_application.g_f03(i),
ord_flag = apex_application.g_f04(i)
WHERE
order_id = apex_application.g_f01(i);
END LOOP;
But the values getting updated wrongly , how can I ensure the exact values is retrieved in apex_application.g_f03(i) & apex_application.g_f04(i) ?
Regards.
Benz

I think the row selector is there if you create an tabular form. However, you can create it yourself following this example:
http://apex.oracle.com/pls/otn/f?p=31517:170
Basically,
apex_item.checkbox (30,
                           '#ROWNUM#',
                           'onclick="highlight_row(this,' || ROWNUM || ')"',
                           NULL,
                           'f30_' || LPAD (ROWNUM, 4, '0')
                          ) delete_checkboxDenes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://apex.oracle.com/pls/otn/f?p=31517:1
http://www.amazon.de/Oracle-APEX-XE-Praxis/dp/3826655494
-------------------------------------------------------------------

How to change Number of Rows in a Tabular Form report page?

Hi
I am working with a tabular form to create an attendance sheet for a school using Oracle Application Express 3.0.1.00.12. Whenever I change the Number of Rows value from 10 to 1000 in the Layout and Pagination section of the report page, the SUBMIT button is not working and it is unable to process at that stage. How can I change the valu so that I can see all the rows in a single page, make changes to all rows and submit the page rightaway. Please help me.
Thanks,
Chak
Edited by: user520137 on Jan 12, 2010 12:04 PM

Hi
I am working with a tabular form to create an attendance sheet for a school using Oracle Application Express 3.0.1.00.12. Whenever I change the Number of Rows value from 10 to 1000 in the Layout and Pagination section of the report page, the SUBMIT button is not working and it is unable to process at that stage. How can I change the valu so that I can see all the rows in a single page, make changes to all rows and submit the page rightaway. Please help me.
Thanks,
Chak
Edited by: user520137 on Jan 12, 2010 12:04 PM

How to put borders in the tabular form report

Hi,
I need to put borders in the tabular form report in the apex UI .I mean in the by default no boundary comes so I need vertical lines in the column .
So how to do that.
Thanks in advance.
Edited by: Vivek on May 22, 2012 8:25 PM

Edit the report page > Report Attributes > Change the report template for different look and feel
You can also customize the report template or even create your own template
http://docs.oracle.com/cd/E23903_01/doc/doc.41/e21674/ui_templt.htm#HTMDB25707

Problem With SQL Query (updateable report)

Hi,
I have a report which I have set as type 'SQL Query (updateable report)'. I have added a 'row selector' to the report but when I run it I get the following error message:
failed to parse SQL query:
ORA-00904: "COL60": invalid identifier
The report works fine if I remove the row selector. Any ideas as to why the error is being produced?
Cheers
Simon

I don't have the apex_application.g_f01(i) referenced in the page source...In the page source you wouldn't find anything by that name
Identify the tabular form's checkbox column in the page(firebug/chrome developer panel makes this easy)
It should be like
<input id="..." value="" type="checkbox" name="fXX" >we are interested in the name attribute , get that number (between 01 and 50)
Replace that number in the code, for instance if it was f05 , the code would use
apex_application.g_f05
--i'th checked record' primary keyWhen you loop through a checkbox array, it only contains the rows which are checked and it is common practice to returns the record's primary key as the value of the checkbox(available as the the i'th array index as apex_application.g_f05(i) , where i is sequence position of the checked row) so that you can identify the record.

Very big problem with JSF about FORM and "id=" for HTML form's elements and

I have discovered a very big problem with JSF about FORM and "id=" for HTML form's elements and java instruction "request.getParameterNames()".
Suppose you have something like this, to render some datas form a Java Beans :
<h:dataTable value="#{TablesDb2Bean.myDataDb2ListSelection}" var="current" border="2" width="50%" cellpadding="2" cellspacing="2" style="text-align: center">
<h:column>
<f:facet name="header">
<h:outputText value="Name"/>
</f:facet>
<h:outputText id="nameTableDb2" value="#{current.db2_name_table}"/>
</h:column>
</h:dataTable>
Everything works fine...
Suppose you want to get the name/value pairs for id="nameTableDb2" and #{current.db2_name_table} to process them in a servlet. Here is the HTML generated :
<td><span <span class="attribute-name">id=<span class="attribute-value">"j_id_jsp_1715189495_22:0:nameTableDb2">my-table-db2-xxxxx</span></td>
You think you can use the java instructions :
Enumeration NamesParam = request.getParameterNames();
while (NomsParam.hasMoreElements()) {
String NameParam = (String) NamesParam.nextElement();
out.println("<h4>"++NameParam+ "+</h4>);
YOU ARE WRONG : request.getParameterNames() wants the syntax *name="nameTableDb2" but JSF must use id="nameTableDb2" for "<h:outputText"... So, you can't process datas in a FORM generated with JSF in a Servlet ! Perhaps I have made an error, but really, I wonder which ?
Edited by: ungars on Jul 18, 2010 12:43 AM
Edited by: ungars on Jul 18, 2010 12:45 AM

While I certainly appreciate ejb's helpful responses, this thread shows up a difference in perspective between how I read the forum and how others do. Author ejb is correct in advising you to stay inside JSF for form processing if form processing is what you want to do.
However, I detect another aspect to this post which reminds me of something Marc Andreesen once said when he was trying to get Netscape off the ground: "there's no such thing as bad HTML."
In this case, I interpret ungar's request as a new feature request. Can I phrase it like this?
"Wouldn't it be nice if I could render my nice form with JSF but, in certain cases, when I REALLY know what I'm doing" just post out to a separate servlet? I know that in this case I'll be missing out on all the nice validation, conversion, l10n, i18n, ajax, portlet and other features provided by JSF".
If this is the case, because it really misses the point of JSF, we don't allow it, but we do have an issue filed for it
https://javaserverfaces-spec-public.dev.java.net/issues/show_bug.cgi?id=127
If you can't wait for it to be fixed, you could decorate the FormRenderer to fix what you want.
I have an example in my JSF book that shows how to do this decoration. http://bit.ly/edburnsjsf2
Ed

Tabular form report export to excel

Hi,
I have a tabular form report and i want to export the tabular form report data to excel when a button is clicked on the tabular form.
can anyone help me out with this.
thanks.

Hi,
Yes,
http://matzberger.de/oracle/spreadsheet-tut-en.html
http://garethroberts.blogspot.com/2007/10/excel-file-output-from-oracle.html
Br ,Jari
Also
Guides to tomcat + cocoon
http://carlback.blogspot.com/2007/03/apex-cocoon-pdf-and-more.html
http://www.poveravoce.net/blog/?p=85
And use this fop_post
http://rste.blogspot.com/2008/07/excel-export-from-apex-cocoon.html
Then of course there is other printing engines like BI publisher , jasper reports, birt ....
Edited by: jarola on Oct 1, 2009 12:33 AM

Update primary key with a tabular form based on a select list for each row

Hello!
I've two tables: Table1 with only one column (primary key) is a foreign key for table2.column1 (primary key). There is also a second primary key column in table2.
Now I want to change the primary key values in table2.column1 with a tabular form (MRU) based on a select list (LOV based on table1.column1) for each row.
The user should be able to choose for every row a new value from the select list to change the old primary key value at this position.
How can I do this with ApEx?
I've the tabular form and so on, but at the moment I get the following error:
"Error in mru internal routine: ORA-20001: Fehler in MRU: row= 1, ORA-20001: ORA-20001: Die aktuelle Version der Daten in der Datenbank wurde geändert, seit der Benutzer einen Update-Prozess eingeleitet hat. ..."
Thank you for your support!
Kay

Hello!
I've two tables: Table1 with only one column (primary key) is a foreign key for table2.column1 (primary key). There is also a second primary key column in table2.
Now I want to change the primary key values in table2.column1 with a tabular form (MRU) based on a select list (LOV based on table1.column1) for each row.
The user should be able to choose for every row a new value from the select list to change the old primary key value at this position.
How can I do this with ApEx?
I've the tabular form and so on, but at the moment I get the following error:
"Error in mru internal routine: ORA-20001: Fehler in MRU: row= 1, ORA-20001: ORA-20001: Die aktuelle Version der Daten in der Datenbank wurde geändert, seit der Benutzer einen Update-Prozess eingeleitet hat. ..."
Thank you for your support!
Kay

My Client is having a serious problem with the Contact Form Widget

My Client is having a serious problem with the Contact Form Widget that I can not figure out how to correct.
I created a website for a client and inserted a Contact Form widget on their 'Contact Us' page. Whenever anyone uses the form, the e-mail my client receive shows my e-mail address as the sender. So, when they 'reply' to the e-mail, the reply is sent to me and not the person who sent the original message. This creates a major problem in that I get barraged with e-mail replies while my client's potential customers go without a response.
When I look at 'Site Manager > System E-Mails > Workflow Information > E-mail From Address' on the site's Admin Console, it shows my e-mail information. Is this is what needs to be changed? If it is, what needs to be placed in that field so that the e-mail my client receives shows the senders e-mail information in the 'From' field. My client wants to be able to click reply and have the message sent to the right party. They would be very upset if they have to cut and past the senders e-mail address from the body text on every contact they receive.
Their feeling is that if I can't find a way to make the contact form work the way it should, then it's useless to them.
Can anyone help me figure this out? I really don't want to disappoint my first client.

Are you on a plan that has the CRM feature that stores your customers' data? If so, the idea of the contact form is that you'll receive a notification that there's been an inquiry filled out on your contact form and there should be a link in that email notification that leads to the "Case" that was created when that customer filled out a contact form. You can click that link and visit the case for that customer in your BC site and reply to them from there so that all of the correspondence is logged in the CRM for safe-keeping and for your records.
If your client finds this is too much work to login to BC to reply every time, then you should check to see if you have the "Customer Service Ticketing" feature on your hosting plan. This is a feature where you create a dedicated email account (like [email protected]) and the BC system will automatically login to that email account and pull any emails in that inbox and convert them to a customer case for the sender of the email and then it will send out a notification via email to any of the BC Admin users you delegate as "Customer Service Agents". Since the CST integrates with the BC CRM it lets you reply directly within the email-- but when you reply it will be going to that same email address dedicated to the CST but once the CST service checks your email again and sees that you replied to this inquiry it will log your reply against the customer's case and sends your reply via email back to them so that all the correspondance gets logged on BC's CRM but you can still reply via email.
There's no way to use the default web forms to update the "From" or "Reply-To" address.. it must come from an approved email address to avoid spam issues. On most web services you cannot change the "from" address anyway but usually you can at least specify the "Reply-To" address so that when someone hits "reply" in their email client it will reply to whoever you setup as the "Reply-To" address.
Here's some more information about CST: http://kb.worldsecuresystems.com/kb/customer-service-ticketing.html?bc-partner
I don't think the CST feature is in the webMarketing BC plan-- I think it's only in the webCommerce plan so if you have less than an webCommerce plan you have to tell your client to reply through BC by clicking the link in the notification they get. You can justify it by saying its one or two more steps but it keeps the entire convo on record in their CRM for easy referral later.

Problem with navagation of forms

Hi everybody
I have a problem with navigation of forms
I have two forms say a and b.In form a i have a button and i want, when i press that button the form b should open.I wrote when_button_pressed trigger for that button in form a as open_form('b'); Raise form_trigger_failure;
When i run form a and press the button form b is not opening.It is giving me a message as 'form b cannot be opened'
Can somebody tell me where i am wrong.I have compiled b.
TIA
Prajakta

Why are you using Raise form_trigger_failure;
You don't need it.
Try doing open_form('b.fmx');
If this doesnt work
I think your problem is that the fmx file for form b is not in the path to be found.
make sure to include the direcoty in the forms60_path or have it in the same directory as form a.

Help me, I have a problem with font when export report to PDF?

Hi everyone! Help me
I have a problem with font when export report to PDF
My report uses template .rtf with font Times New Roman (Unicode), language is VietNamese.
when desige template no problem, error only happen when view report by PDF.
Edited by: user10236405 on Oct 15, 2008 11:23 PM

give it time to boot. the time depends on yr memory size n data. soon a process bar will appear indicating the boot process. if still this doesnt work. try formating the phone. but this ways u lose all data on the phone (unless u backed it). relax! the data on the memory card is safe.

Problems with Submitting the form

Hey Guys,
I have a form with 7 different fields. my form is connected with the database. once the user fills out the information and clicks on submit the entry should be saved in the database.
Everything is working fine. i can establish connection with the database. my only problem is that when i click on submit its not adding the entry in the database. I think i have problems with this command
<form method = "post" > . Any helpo will be really appreciated. I am posting some part of the code.
<%!
public void jspInit() {
    try {
      Class.forName("org.apache.derby.jdbc.ClientDriver");
      System.out.println("JDBC driver loaded");
    catch (ClassNotFoundException e) {
      System.out.println(e.toString());
<body>
<%
String name, unit, title, supervisor, region, dept, date;
%>
<p align="center"><b><font size="5" face="Arial">LOGIN REQUEST FORM </font></b>
<form method="POST">
<p align="left"><b><font size="2">
     </b>Name:<b> <input type="text" name="name" size="20">   </b>Title   <b>
     <input type="text" name="title" size="20">         </b> Dept <b>
     <input type="text" name="dept" size="20"></b></font></p>
     <p align="left"><font size="2"><b>
     </b>Supervisor: <b> <input type="text" name="supervisor" size="20"> </b>Region<b>
     <input type="text" name="region" size="20"> </b>Business Unit<b>
     <input type="text" name="unit" size="20"></b></font></p>
     <p align="left"><font size="2"><b>              </b>
     Effective Date:<b> <input type="text" name="date" size="20"></b></font></p>
     <input type = "reset">
     <input type = "submit">
     <%
     name = request.getParameter("name");
     unit = request.getParameter("unit");
     title = request.getParameter("title");
     supervisor = request.getParameter("supervisor");
     region = request.getParameter("region");
     dept = request.getParameter("dept");
     date = request.getParameter("date");
     boolean error = false;
     String message = null;
     try {
          Connection con = DriverManager.getConnection("jdbc:derby://localhost:1527/sample");
          System.out.println("Connection Established");
          Statement s = con.createStatement();
          String sql = "SELECT name FROM users" +
          "WHERE name='" + name + "'";
          ResultSet rs = s.executeQuery(sql);
          if(rs.next()) {
               rs.close();
               message = "The username <B>" + encodeHtmlTag(name) + "</B> has already been taken. Please select another name.";
               error = true;
          else {
               rs.close();
               sql = "INSERT INTO user" +
               "(name, unit, title, supervisor, region, dept, date)" +
               "VALUES" +
               "('" + name + "'," + " '" + unit + "'," + " '" + title + "'," + " '" + supervisor + "',"
               + " '" + region + "'," + " '" + dept + "'," + " '" + date + "')";
               int i = s.executeUpdate(sql);
               if(i==1) {
                    message = "User Added";
          s.close();
          con.close();
     catch(SQLException e) {
          message = "Error " + e.toString();
     catch(Exception e) {
          message = "Error" + e.toString();
          error = true;
     %>
</form>
</body>
</html>

Even if there was an exception being thrown, you wouldn't see it because you're catching it but not doing anything with the message:
catch(SQLException e) {
          message = "Error " + e.toString();
     catch(Exception e) {
          message = "Error" + e.toString();
          error = true;
     }Try changing this part to:
catch(SQLException e) {
          message = "Error " + e.toString();
                e.printStackTrace();
     catch(Exception e) {
          message = "Error" + e.toString();
          error = true;
                e.printStackTrace();
     }

I have problems with buttons and Forms in my trial proof of Indesign CC, how can I fix it?

I have problems with buttons and Forms in my trial proof of Indesign CC, how can I fix it?

Moved to InDesign forum.
You can start by telling us what the problem is.

Problem with a link in a number-column

I use Apex 2.2 in German Version. In a report there is a column containing numbers (7,2). For this column I installed a link to a cell from a tabular form. When there is a number like 1234,56 the result of the link in the tabular form is 1234. The after-comma figures are not transferred and it is necessary to add them manually.
I use Apex 2.2 in German version. Maybe the comma is the reason that the figures behind are not carried forward. Would it be possible to improve this?

Hello Scott and Michael...
Firstly I'm a newbie and using APEX v2.2
I have this problem, for example in my employee table with this columns.
id_emp, first_name, last_name, mobile_no, id_department, id_manager.
<<id_manager is recursive to id_emp,>>
So, when I try to setup i#ID_MANAGER# using P1_REPORT_SEARCH, Always receive "No data found". If I put, for example the first_name, i't's work perfectly, but show me multiples rows.
I tried this too:
f?p=&APP_ID.:1:&SESSION.::&DEBUG.::P1_REPORT_SEARCH,P1_REPORT_SEARCH:#ID_MANAGER#
Do you have any idea to this problem?. I want to see the employee row, in this case the manager row.
Before the problem began, I run the patch to apex, and after that the problem begun.
Thanks,
David :D

Problem with Localization of Crystal Reports

Post Author: raj20007
CA Forum: Crystal Reports
Hi everyone..I am having a problem with crystal Reports. I need Malayalam unicode( INDIAN Language) to be displayed in the reports, this data will be binded from database.And the problem is : After applying this unicode font to the labels of my reports, some labels in the reports are going invisible.Also, previously if I increase the font size beyond 22, I used to get "A Generic error occured in GDI+". But after changing the textformat property of the field to "crRtfText" from "crstandardText" , I could resolve this Generic Error.
And, I could also observe that the last char of the fields in the "details" section is repeating.This is the code I am using to apply local font to the labels.
Private Sub assignfont()
Dim Mfont As New Font("kartika", 20, FontStyle.Regular,GraphicsUnit.Document)
CType(Report.Section8.ReportObjects("Field45"), CrystalDecisions.CrystalReports.Engine.FieldObject).ApplyFont(Mfont)
CType(Report.Section8.ReportObjects("Field48"), CrystalDecisions.CrystalReports.Engine.FieldObject).ApplyFont(Mfont)
End SubAnd I am calling this function in the form load event of that report.Any suggestion on this is greatly appreciated........Thanks in advance..

Thanks for replying.
Yes I am trying to move the 15mb of template files which are located in the Users Profile to a different location. I have modified the key in the Registry which defines this location: HKEY_CURRENT_USER\Software
Business Objects\Suite 12.0\Crystal Reports\ChartSupportPath=My Defined Location
I have done this prior to installtion and prepulated the registry and the templates in my defined location, but the installation over looks this and writes over the reg key. Even after modifying the reg key post installation, the application writes over this key and ignores what's in there. Does this mean that the Install.EXE is hard coded to always over write that location, and therefore the crw32.exe is hard coded to look in the User's Profile for the templates, and if they are not there it will create a copy for the User specific??
Thanks

Problem with my tabular form report repeating columns

Similar Messages

Maybe you are looking for