Problem [with netcat] in git
Hi,
I have some repositories in my laptop, when i want to pull the new commits in git hub i get this problem:
[root@mysystem /home/user/gitrepos]# git clone git://github.com/me/myrepository
Cloning into 'myrepository'...
nc: connection failed, SOCKS error 6
fatal: Could not read from remote repository.
I have reinstalled git and netcat but it had no effects.
Last edited by prodigen (2013-04-20 18:27:36)
First, welcome to the Arch community.
Second, please use code tags
(like so)
It makes everything much easier to read.
Third, please don't post faux commands, post what you actually typed and ran; it makes troubleshooting much simpler.
All the best,
-HG
Similar Messages
-
[Solved] Problem with upgrading polkit or filesystem
Ok so first off they do "upgrade" but the problem has me worried that something is wrong.
A week or so ago after converting to systemd I tried getting rid of ConsoleKit and installing polkit 0.107 from the [testing] repo but it caused pacman to get stuck at "(1/1) upgrading polkit" So I tried that a couple of times but I could never get pacman to finish and get past that. I had to control + c to get out of that then type exit in the console (no text was visible that I typed however but typing exit + enter worked for closing it). So I then opened a new terminal and downgraded polkit back to 0.105 and waited for polkit to get pushed from testing to see if it would fix my issue. Fast forward to today and I go to upgrade my system. Among the 83 updates or so was polkit and filesystem. What do you know it gets stuck at "(15/83) upgrading polkit". Fuck so I control + c, open new terminal and then do the upgrade again and it continues to update but this time it gets stuck doing the same thing for filesystem. I control + c, open new terminal and continue the upgrade until it finishes, which it does this time, and I reboot.
I tried re-installing polkit again and filesystem again but they continue to get stuck. I cannot "complete" the upgrade even though they show the appropriate version when I check.
Terminal
[507] shauder@arch-desktop [~] $ sudo pacman -S polkit
warning: polkit-0.107-4 is up to date -- reinstalling
resolving dependencies...
looking for inter-conflicts...
Targets (1): polkit-0.107-4
Total Installed Size: 1.77 MiB
Net Upgrade Size: 0.00 MiB
Proceed with installation? [Y/n]
(1/1) checking package integrity [########################################################] 100%
(1/1) loading package files [########################################################] 100%
(1/1) checking for file conflicts [########################################################] 100%
(1/1) checking available disk space [########################################################] 100%
(1/1) upgrading polkit
/var/log/pacman.log
[2012-07-18 18:27] installed filesystem (2012.6-4)
[2012-07-18 18:27] installed findutils (4.4.2-4)
[2012-07-18 18:27] installed gawk (4.0.1-1)
[2012-07-18 18:27] installed gettext (0.18.1.1-4)
[2012-07-18 18:27] installed grep (2.13-2)
[2012-07-18 18:27] installed sed (4.2.1-4)
[2012-07-18 18:27] installed grub (0.97-21)
[2012-07-18 18:27] installed gzip (1.5-1)
[2012-07-18 18:27] installed gdbm (1.10-1)
[2012-07-18 18:27] installed perl (5.16.0-2)
[2012-07-18 18:27] installed openssl (1.0.1.c-1)
[2012-07-18 18:27] installed libsasl (2.1.23-9)
[2012-07-18 18:27] installed libldap (2.4.31-4)
[2012-07-18 18:27] installed keyutils (1.5.5-3)
[2012-07-18 18:27] installed krb5 (1.10.2-2)
[2012-07-18 18:27] installed heirloom-mailx (12.5-3)
[2012-07-18 18:27] installed inetutils (1.9.1-2)
[2012-07-18 18:27] installed iproute2 (3.4.0-2)
[2012-07-18 18:27] installed sysvinit (2.88-6)
[2012-07-18 18:27] installed initscripts (2012.06.3-2)
[2012-07-18 18:27] installed sysfsutils (2.1.0-8)
[2012-07-18 18:27] >> Traceroute is now provided by core/traceroute
[2012-07-18 18:27] installed iputils (20101006-4)
[2012-07-18 18:27] installed jfsutils (1.1.15-3)
[2012-07-18 18:27] installed less (444-3)
[2012-07-18 18:27] installed licenses (2.9-1)
[2012-07-18 18:27] installed linux-firmware (20120625-1)
[2012-07-18 18:27] installed mkinitcpio-busybox (1.20.1-1)
[2012-07-18 18:27] installed expat (2.1.0-1)
[2012-07-18 18:27] installed libarchive (3.0.4-1)
[2012-07-18 18:27] installed mkinitcpio (0.9.2-2)
[2012-07-18 18:27] >>> Updating module dependencies. Please wait ...
[2012-07-18 18:27] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2012-07-18 18:27] ==> Building image from preset: 'default'
[2012-07-18 18:27] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2012-07-18 18:27] ==> Starting build: 3.4.5-1-ARCH
[2012-07-18 18:27] -> Running build hook: [base]
[2012-07-18 18:27] -> Running build hook: [udev]
[2012-07-18 18:27] -> Running build hook: [autodetect]
[2012-07-18 18:27] -> Running build hook: [pata]
[2012-07-18 18:27] -> Running build hook: [scsi]
[2012-07-18 18:27] -> Running build hook: [sata]
[2012-07-18 18:27] -> Running build hook: [filesystems]
[2012-07-18 18:27] -> Running build hook: [usbinput]
[2012-07-18 18:27] -> Running build hook: [fsck]
[2012-07-18 18:27] ==> Generating module dependencies
[2012-07-18 18:27] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
[2012-07-18 18:27] bsdcpio: Failed to set default locale
[2012-07-18 18:27] ==> Image generation successful
[2012-07-18 18:27] ==> Building image from preset: 'fallback'
[2012-07-18 18:27] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
[2012-07-18 18:27] ==> Starting build: 3.4.5-1-ARCH
[2012-07-18 18:27] -> Running build hook: [base]
[2012-07-18 18:27] -> Running build hook: [udev]
[2012-07-18 18:27] -> Running build hook: [pata]
[2012-07-18 18:27] -> Running build hook: [scsi]
[2012-07-18 18:27] -> Running build hook: [sata]
[2012-07-18 18:27] -> Running build hook: [filesystems]
[2012-07-18 18:27] -> Running build hook: [usbinput]
[2012-07-18 18:27] -> Running build hook: [fsck]
[2012-07-18 18:27] ==> Generating module dependencies
[2012-07-18 18:27] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
[2012-07-18 18:27] bsdcpio: Failed to set default locale
[2012-07-18 18:27] ==> Image generation successful
[2012-07-18 18:27] installed linux (3.4.5-1)
[2012-07-18 18:27] installed logrotate (3.8.1-2)
[2012-07-18 18:27] installed lvm2 (2.02.96-3)
[2012-07-18 18:27] installed texinfo (4.13a-7)
[2012-07-18 18:27] installed groff (1.21-2)
[2012-07-18 18:27] installed libpipeline (1.2.1-1)
[2012-07-18 18:27] it's recommended to create an initial
[2012-07-18 18:27] database running as root:
[2012-07-18 18:27] "/usr/bin/mandb --quiet"
[2012-07-18 18:27] installed man-db (2.6.2-1)
[2012-07-18 18:27] installed man-pages (3.41-1)
[2012-07-18 18:27] installed mdadm (3.2.5-2)
[2012-07-18 18:27] installed nano (2.2.6-2)
[2012-07-18 18:27] installed ca-certificates (20120623-1)
[2012-07-18 18:27] installed libssh2 (1.4.2-1)
[2012-07-18 18:27] installed curl (7.26.0-1)
[2012-07-18 18:27] installed pth (2.0.7-4)
[2012-07-18 18:27] installed libksba (1.2.0-2)
[2012-07-18 18:27] installed libassuan (2.0.3-1)
[2012-07-18 18:27] installed pinentry (0.8.1-4)
[2012-07-18 18:27] installed dirmngr (1.1.0-4)
[2012-07-18 18:27] installed gnupg (2.0.19-2)
[2012-07-18 18:27] installed gpgme (1.3.1-4)
[2012-07-18 18:27] installed pacman-mirrorlist (20120626-1)
[2012-07-18 18:27] installed archlinux-keyring (20120622-1)
[2012-07-18 18:27] >>> Run `pacman-key --init; pacman-key --populate archlinux`
[2012-07-18 18:27] >>> to import the data required by pacman for package verification.
[2012-07-18 18:27] >>> See: https://www.archlinux.org/news/having-pacman-verify-packages
[2012-07-18 18:27] installed pacman (4.0.3-3)
[2012-07-18 18:27] installed pciutils (3.1.10-1)
[2012-07-18 18:27] installed pcmciautils (018-4)
[2012-07-18 18:27] installed libnl (3.2.11-1)
[2012-07-18 18:27] installed libusbx (1.0.12-2)
[2012-07-18 18:27] installed libpcap (1.3.0-1)
[2012-07-18 18:27] installed ppp (2.4.5-3)
[2012-07-18 18:27] installed procps-ng (3.3.3-3)
[2012-07-18 18:27] installed psmisc (22.19-1)
[2012-07-18 18:27] installed reiserfsprogs (3.6.21-4)
[2012-07-18 18:27] installed shadow (4.1.5.1-1)
[2012-07-18 18:27] installed eventlog (0.2.12-3)
[2012-07-18 18:27] installed syslog-ng (3.3.5-2)
[2012-07-18 18:27] installed tar (1.26-2)
[2012-07-18 18:27] installed usbutils (006-1)
[2012-07-18 18:27] installed vi (1:050325-2)
[2012-07-18 18:27] installed wget (1.13.4-1)
[2012-07-18 18:27] installed which (2.20-5)
[2012-07-18 18:27] installed dbus-core (1.6.2-2)
[2012-07-18 18:27] installed wpa_supplicant (1.0-1)
[2012-07-18 18:27] installed xfsprogs (3.1.8-2)
[2012-07-18 18:27] installed m4 (1.4.16-2)
[2012-07-18 18:27] installed autoconf (2.69-1)
[2012-07-18 18:27] installed automake (1.12.2-1)
[2012-07-18 18:27] installed binutils (2.22-9)
[2012-07-18 18:27] installed bison (2.5.1-1)
[2012-07-18 18:27] installed fakeroot (1.18.4-1)
[2012-07-18 18:27] installed flex (2.5.35-5)
[2012-07-18 18:27] installed mpfr (3.1.1-1)
[2012-07-18 18:27] installed libmpc (0.9-2)
[2012-07-18 18:27] installed isl (0.10-1)
[2012-07-18 18:27] installed cloog (0.17.0-2)
[2012-07-18 18:27] installed ppl (1.0-1)
[2012-07-18 18:27] installed gcc (4.7.1-4)
[2012-07-18 18:27] installed libltdl (2.4.2-6)
[2012-07-18 18:27] installed libtool (2.4.2-6)
[2012-07-18 18:27] installed make (3.82-4)
[2012-07-18 18:27] installed patch (2.6.1-3)
[2012-07-18 18:27] installed pkg-config (0.27-1)
[2012-07-18 18:37] Running 'pacman -Syy'
[2012-07-18 18:37] synchronizing package lists
[2012-07-18 18:38] Running 'pacman -Syy'
[2012-07-18 18:38] synchronizing package lists
[2012-07-18 18:39] Running 'pacman -S sudo'
[2012-07-18 18:43] Running 'pacman -S sudo'
[2012-07-18 18:44] Running 'pacman -S sudo'
[2012-07-18 18:44] installed sudo (1.8.5.p2-1)
[2012-07-18 18:45] Running 'pacman -S alsa-utils'
[2012-07-18 18:46] installed alsa-lib (1.0.25-1)
[2012-07-18 18:46] installed dialog (1.1_20120706-1)
[2012-07-18 18:46] installed libogg (1.3.0-1)
[2012-07-18 18:46] installed flac (1.2.1-3)
[2012-07-18 18:46] installed libvorbis (1.3.3-1)
[2012-07-18 18:46] installed libsndfile (1.0.25-2)
[2012-07-18 18:46] installed libsamplerate (0.1.8-1)
[2012-07-18 18:46] installed alsa-utils (1.0.25-3)
[2012-07-18 18:46] Running 'pacman -S alsa-plugins'
[2012-07-18 18:46] installed alsa-plugins (1.0.25-2)
[2012-07-18 18:48] Running 'pacman -S xorg-server xorg-xinit xorg-server-utils'
[2012-07-18 18:48] installed xproto (7.0.23-1)
[2012-07-18 18:48] installed libxdmcp (1.1.1-1)
[2012-07-18 18:48] installed freetype2 (2.4.10-1)
[2012-07-18 18:48] installed libfontenc (1.1.1-1)
[2012-07-18 18:48] installed fontsproto (2.1.2-1)
[2012-07-18 18:48] installed libxfont (1.4.5-1)
[2012-07-18 18:48] installed libpciaccess (0.13.1-1)
[2012-07-18 18:48] installed libdrm (2.4.37-1)
[2012-07-18 18:48] installed pixman (0.26.2-1)
[2012-07-18 18:48] installed libxau (1.0.7-1)
[2012-07-18 18:48] installed xcb-proto (1.7.1-1)
[2012-07-18 18:48] installed libxcb (1.8.1-1)
[2012-07-18 18:48] installed kbproto (1.0.6-1)
[2012-07-18 18:48] installed libx11 (1.5.0-1)
[2012-07-18 18:48] installed libxkbfile (1.0.8-1)
[2012-07-18 18:48] installed xorg-xkbcomp (1.2.4-1)
[2012-07-18 18:48] installed xkeyboard-config (2.6-1)
[2012-07-18 18:48] installed xorg-setxkbmap (1.3.0-1)
[2012-07-18 18:48] installed xorg-fonts-encodings (1.0.4-3)
[2012-07-18 18:48] installed xorg-fonts-alias (1.0.2-2)
[2012-07-18 18:48] installed xorg-bdftopcf (1.0.3-2)
[2012-07-18 18:48] installed xorg-mkfontscale (1.1.0-1)
[2012-07-18 18:48] installed xorg-mkfontdir (1.0.7-1)
[2012-07-18 18:48] installed xorg-font-util (1.3.0-1)
[2012-07-18 18:48] installed xorg-font-utils (7.6-3)
[2012-07-18 18:48] updating font cache... done.
[2012-07-18 18:48] installed fontconfig (2.8.0-2)
[2012-07-18 18:49] Updating font cache... done.
[2012-07-18 18:49] installed xorg-fonts-misc (1.0.1-2)
[2012-07-18 18:49] installed xorg-server-common (1.12.3-1)
[2012-07-18 18:49] installed xf86-input-evdev (2.7.0-2)
[2012-07-18 18:49] installed xorg-server (1.12.3-1)
[2012-07-18 18:49] installed xextproto (7.2.1-1)
[2012-07-18 18:49] installed libxext (1.3.1-1)
[2012-07-18 18:49] installed libice (1.0.8-1)
[2012-07-18 18:49] installed libsm (1.2.1-1)
[2012-07-18 18:49] installed libxt (1.1.3-1)
[2012-07-18 18:49] installed libxmu (1.1.1-1)
[2012-07-18 18:49] installed xorg-xauth (1.0.7-1)
[2012-07-18 18:49] installed xorg-xinit (1.3.2-1)
[2012-07-18 18:49] installed xorg-iceauth (1.0.5-1)
[2012-07-18 18:49] installed xorg-sessreg (1.0.7-1)
[2012-07-18 18:49] installed xorg-xcmsdb (1.0.4-1)
[2012-07-18 18:49] installed renderproto (0.11.1-2)
[2012-07-18 18:49] installed libxrender (0.9.7-1)
[2012-07-18 18:49] installed randrproto (1.3.2-2)
[2012-07-18 18:49] installed libxrandr (1.3.2-2)
[2012-07-18 18:49] installed xorg-xbacklight (1.1.2-3)
[2012-07-18 18:49] installed xf86vidmodeproto (2.3.1-2)
[2012-07-18 18:49] installed libxxf86vm (1.1.2-1)
[2012-07-18 18:49] installed xorg-xgamma (1.0.5-1)
[2012-07-18 18:49] installed xorg-xhost (1.0.5-1)
[2012-07-18 18:49] installed xorg-xrandr (1.3.5-1)
[2012-07-18 18:49] installed inputproto (2.2-1)
[2012-07-18 18:49] installed libxi (1.6.1-1)
[2012-07-18 18:49] installed xineramaproto (1.2.1-2)
[2012-07-18 18:49] installed libxinerama (1.1.2-1)
[2012-07-18 18:49] installed xorg-xinput (1.6.0-1)
[2012-07-18 18:49] installed xorg-xmodmap (1.0.7-1)
[2012-07-18 18:49] installed mcpp (2.7.2-4)
[2012-07-18 18:49] installed xorg-xrdb (1.0.9-2)
[2012-07-18 18:49] installed xorg-xrefresh (1.0.4-3)
[2012-07-18 18:49] installed xorg-xset (1.2.2-1)
[2012-07-18 18:49] installed fixesproto (5.0-2)
[2012-07-18 18:49] installed libxfixes (5.0-2)
[2012-07-18 18:49] installed libxcursor (1.1.13-1)
[2012-07-18 18:49] installed xorg-xsetroot (1.1.0-3)
[2012-07-18 18:49] installed xorg-server-utils (7.6-3)
[2012-07-18 18:50] Running 'pacman -S nvidia nvidia-utils'
[2012-07-18 18:50] Running 'pacman -S nvidia nvidia-utils lib32-nvidia-utils'
[2012-07-18 18:51] installed videoproto (2.3.1-2)
[2012-07-18 18:51] installed libxv (1.0.7-1)
[2012-07-18 18:51] installed libxvmc (1.0.7-1)
[2012-07-18 18:51] installed nvidia-utils (302.17-1)
[2012-07-18 18:51] In order to use nvidia module, reboot the system.
[2012-07-18 18:51] installed nvidia (302.17-3)
[2012-07-18 18:51] installed lib32-glibc (2.16.0-2)
[2012-07-18 18:51] installed lib32-libxdmcp (1.1.1-1)
[2012-07-18 18:51] installed lib32-libxau (1.0.7-1)
[2012-07-18 18:51] installed lib32-libxcb (1.8.1-2)
[2012-07-18 18:51] installed lib32-libx11 (1.5.0-1)
[2012-07-18 18:51] installed lib32-libxext (1.3.1-1)
[2012-07-18 18:51] installed lib32-libxv (1.0.7-1)
[2012-07-18 18:51] installed lib32-libxvmc (1.0.7-1)
[2012-07-18 18:51] installed lib32-zlib (1.2.7-1)
[2012-07-18 18:51] installed lib32-gcc-libs (4.7.1-4.1)
[2012-07-18 18:51] installed lib32-nvidia-utils (302.17-1)
[2012-07-18 18:55] Running 'pacman -S xorg-twm xorg-xclock xterm'
[2012-07-18 18:55] installed xorg-twm (1.0.7-1)
[2012-07-18 18:55] installed libxpm (3.5.10-1)
[2012-07-18 18:55] installed libxaw (1.0.11-1)
[2012-07-18 18:55] installed libxft (2.3.1-1)
[2012-07-18 18:55] installed xorg-xclock (1.0.6-1)
[2012-07-18 18:55] installed xorg-luit (1.1.1-1)
[2012-07-18 18:55] installed xbitmaps (1.1.1-2)
[2012-07-18 18:55] installed xterm (281-1)
[2012-07-18 18:55] Running 'pacman -S dbus'
[2012-07-18 18:55] installed dbus (1.6.2-1)
[2012-07-18 18:56] Running 'pacman -S ttf-dejavu'
[2012-07-18 18:56] installed ttf-dejavu (2.33-3)
[2012-07-18 18:57] Running 'pacman -S awesome'
[2012-07-18 18:57] installed libpng (1.5.11-1)
[2012-07-18 18:57] installed cairo (1.12.2-2)
[2012-07-18 18:57] installed libjpeg-turbo (1.2.1-1)
[2012-07-18 18:57] installed libtiff (4.0.2-1)
[2012-07-18 18:57] installed giflib (4.1.6-5)
[2012-07-18 18:57] installed libid3tag (0.15.1b-7)
[2012-07-18 18:57] installed imlib2 (1.4.5-2)
[2012-07-18 18:57] installed libev (4.11-1)
[2012-07-18 18:57] installed libxdg-basedir (1.2.0-1)
[2012-07-18 18:57] installed lua (5.1.5-2)
[2012-07-18 18:57] installed libdatrie (0.2.5-1)
[2012-07-18 18:57] installed libthai (0.1.17-1)
[2012-07-18 18:57] installed pango (1.30.1-1)
[2012-07-18 18:57] installed xcb-util (0.3.9-1)
[2012-07-18 18:57] installed startup-notification (0.12-3)
[2012-07-18 18:57] installed xcb-util-image (0.3.9-1)
[2012-07-18 18:57] installed xcb-util-keysyms (0.3.9-1)
[2012-07-18 18:57] installed xcb-util-wm (0.3.9-1)
[2012-07-18 18:57] installed xorg-xmessage (1.0.3-2)
[2012-07-18 18:57] installed awesome (3.4.13-1)
[2012-07-18 18:58] Running 'pacman -S rlwrap feh'
[2012-07-18 18:58] installed rlwrap (0.37-2)
[2012-07-18 18:58] installed giblib (1.2.4-5)
[2012-07-18 18:58] installed libexif (0.6.20-2)
[2012-07-18 18:58] installed feh (2.5-1)
[2012-07-18 18:59] Running 'pacman -S packer'
[2012-07-18 18:59] Running 'pacman -S lightdm'
[2012-07-18 19:01] Running 'pacman -S fakeroot'
[2012-07-18 19:01] upgraded fakeroot (1.18.4-1 -> 1.18.4-1)
[2012-07-18 19:08] Running 'pacman -S git'
[2012-07-18 19:08] installed perl-error (0.17018-1)
[2012-07-18 19:08] installed git (1.7.11.2-1)
[2012-07-18 19:08] Running 'pacman -S jshon'
[2012-07-18 19:08] installed jansson (2.3-1)
[2012-07-18 19:08] installed jshon (20111222-1)
[2012-07-18 19:08] Running 'pacman -U packer-20120718-1-any.pkg.tar.xz'
[2012-07-18 19:08] installed packer (20120718-1)
[2012-07-18 19:10] Running 'pacman --noconfirm --asdeps -S -- accountsservice dbus-glib gobject-introspection intltool itstool libxklavier'
[2012-07-18 19:10] installed polkit (0.105-1)
[2012-07-18 19:10] installed accountsservice (0.6.22-1)
[2012-07-18 19:10] installed dbus-glib (0.100-1)
[2012-07-18 19:10] installed sqlite (3.7.13-1)
[2012-07-18 19:10] installed python2 (2.7.3-2)
[2012-07-18 19:10] installed gobject-introspection (1.32.1-2)
[2012-07-18 19:10] installed perl-xml-parser (2.41-3)
[2012-07-18 19:10] installed intltool (0.50.2-1)
[2012-07-18 19:10] installed libxml2 (2.7.8-2)
[2012-07-18 19:10] installed itstool (1.1.2-1)
[2012-07-18 19:10] installed iso-codes (3.34-1)
[2012-07-18 19:10] installed libxklavier (5.2.1-2)
[2012-07-18 19:13] Running 'pacman -U lightdm-1.3.1-4-x86_64.pkg.tar.xz'
[2012-07-18 19:14] You need to install lightdm-gtk-greeter to run the default and most stable greeter
[2012-07-18 19:14] installed lightdm (1.3.1-4)
[2012-07-18 19:14] Running 'pacman --noconfirm --asdeps -S -- archlinux-wallpaper bzr gnome-common gnome-doc-utils gtk-doc gtk-engines libwebkit vala'
[2012-07-18 19:15] ==> Wallpapers have been installed to /usr/share/archlinux/wallpaper
[2012-07-18 19:15] installed archlinux-wallpaper (1.4-1)
[2012-07-18 19:15] installed bzr (2.5.1-1)
[2012-07-18 19:15] installed gnome-common (3.4.0.1-2)
[2012-07-18 19:15] installed libxslt (1.1.26-3)
[2012-07-18 19:15] installed docbook-xml (4.5-5)
[2012-07-18 19:15] installed rarian (0.8.1-2)
[2012-07-18 19:15] installed gnome-doc-utils (0.20.10-1)
[2012-07-18 19:15] installed docbook-xsl (1.77.1-2)
[2012-07-18 19:15] installed gtk-doc (1.18-1)
[2012-07-18 19:15] installed atk (2.4.0-1)
[2012-07-18 19:15] installed compositeproto (0.4.2-2)
[2012-07-18 19:15] installed libxcomposite (0.4.3-2)
[2012-07-18 19:15] installed damageproto (1.2.1-2)
[2012-07-18 19:15] installed libxdamage (1.1.3-2)
[2012-07-18 19:15] installed shared-mime-info (1.0-1)
[2012-07-18 19:15] installed libtasn1 (2.13-1)
[2012-07-18 19:15] installed nettle (2.5-1)
[2012-07-18 19:15] installed p11-kit (0.12-1)
[2012-07-18 19:15] installed gnutls (3.0.21-1)
[2012-07-18 19:15] installed libdaemon (0.14-2)
[2012-07-18 19:15] ==> The following daemons may be added to DAEMONS in /etc/rc.conf:
[2012-07-18 19:15] ==> avahi-daemon: the mdns responder, you probably want this.
[2012-07-18 19:15] ==> dbus needs to be running when you start it.
[2012-07-18 19:15] ==> avahi-dnsconfd: daemon used for peer-to-peer automatic dns
[2012-07-18 19:15] ==> configuration on dhcp-less networks.
[2012-07-18 19:15]
[2012-07-18 19:15] ==> To use some of the client applications you will have to install python.
[2012-07-18 19:15] ==> In addition, pygtk is required for the graphical ones and
[2012-07-18 19:15] ==> twisted for avahi-bookmarks.
[2012-07-18 19:15] installed avahi (0.6.31-3)
[2012-07-18 19:15] installed libcups (1.5.3-5)
[2012-07-18 19:15] installed gdk-pixbuf2 (2.26.1-1)
[2012-07-18 19:15] installed gtk-update-icon-cache (2.24.10-3)
[2012-07-18 19:15] installed gtk2 (2.24.10-3)
[2012-07-18 19:15] installed gtk-engines (2.21.0-1)
[2012-07-18 19:15] installed icu (49.1.2-1)
[2012-07-18 19:15] installed gstreamer0.10 (0.10.36-1)
[2012-07-18 19:15] installed orc (0.4.16-1)
[2012-07-18 19:15] installed gstreamer0.10-base (0.10.36-1)
[2012-07-18 19:15] installed libproxy (0.4.7-2)
[2012-07-18 19:15] installed gsettings-desktop-schemas (3.4.2-1)
[2012-07-18 19:15] installed glib-networking (2.32.3-1)
[2012-07-18 19:15] installed libsoup (2.38.1-1)
[2012-07-18 19:15] ==> aspell comes with no default dictionary
[2012-07-18 19:15] installed aspell (0.60.6.1-1)
[2012-07-18 19:15] installed hunspell (1.3.2-1)
[2012-07-18 19:15] installed hspell (1.1-2)
[2012-07-18 19:15] installed enchant (1.6.0-4)
[2012-07-18 19:15] installed geoclue (0.12.0-5)
[2012-07-18 19:15] installed libwebkit (1.8.1-1)
[2012-07-18 19:15] installed vala (0.16.1-1)
[2012-07-18 19:16] Running 'pacman -U lightdm-webkit-greeter-bzr-13-3-x86_64.pkg.tar.xz'
[2012-07-18 19:16] Running 'pacman -U lightdm-webkit-greeter-0.1.2-3-x86_64.pkg.tar.xz'
[2012-07-18 19:16] installed lightdm-webkit-greeter (0.1.2-3)
[2012-07-18 19:47] Running 'pacman -R lightdm'
[2012-07-18 19:48] Running 'pacman -R lightdm-webkit-greeter lightdm accountsservice dbus-glib libxklavier'
[2012-07-18 19:48] Running 'pacman -R lightdm-webkit-greeter lightdm accountsservice enchant geoclue dbus-glib libxklavier'
[2012-07-18 19:48] Running 'pacman -R lightdm-webkit-greeter lightdm accountsservice libwebkite enchant geoclue dbus-glib libxklavier'
[2012-07-18 19:48] Running 'pacman -R lightdm-webkit-greeter lightdm accountsservice libwebkit enchant geoclue dbus-glib libxklavier'
[2012-07-18 19:49] removed lightdm-webkit-greeter (0.1.2-3)
[2012-07-18 19:49] removed libwebkit (1.8.1-1)
[2012-07-18 19:49] removed geoclue (0.12.0-5)
[2012-07-18 19:49] removed enchant (1.6.0-4)
[2012-07-18 19:49] userdel: user lightdm is currently used by process 657
[2012-07-18 19:49] groupdel: cannot remove the primary group of user 'lightdm'
[2012-07-18 19:49] removed lightdm (1.3.1-4)
[2012-07-18 19:49] removed libxklavier (5.2.1-2)
[2012-07-18 19:49] removed dbus-glib (0.100-1)
[2012-07-18 19:49] removed accountsservice (0.6.22-1)
[2012-07-18 19:50] Running 'pacman -S chromium'
[2012-07-18 19:50] installed dbus-glib (0.100-1)
[2012-07-18 19:50] installed nspr (4.9.1-1)
[2012-07-18 19:50] installed nss (3.13.5-1)
[2012-07-18 19:50] installed xdg-utils (1.1.0-2.20120520)
[2012-07-18 19:50] installed libevent (2.0.19-1)
[2012-07-18 19:50] installed scrnsaverproto (1.2.2-1)
[2012-07-18 19:50] installed libxss (1.2.2-1)
[2012-07-18 19:50] installed desktop-file-utils (0.20-1)
[2012-07-18 19:50] installed hicolor-icon-theme (0.12-2)
[2012-07-18 19:50] installed chromium (20.0.1132.57-1)
[2012-07-18 19:50] Running 'pacman -Sy abs'
[2012-07-18 19:50] synchronizing package lists
[2012-07-18 19:51] installed rsync (3.0.9-3)
[2012-07-18 19:51] installed abs (2.4.3-2)
[2012-07-18 19:52] Running 'pacman -S openjdk6 perl git gnupg flex bison gperf zip unzip wxgtk squashfs-tools ncurses libpng zlib libusb libusb-compat readline'
[2012-07-18 19:53] installed ca-certificates-java (20120608-1)
[2012-07-18 19:53] installed recordproto (1.14.2-1)
[2012-07-18 19:53] installed libxtst (1.2.1-1)
[2012-07-18 19:53] upgraded zlib (1.2.7-1 -> 1.2.7-1)
[2012-07-18 19:53] upgraded libpng (1.5.11-1 -> 1.5.11-1)
[2012-07-18 19:53] Warning: there was a problem reading the certificate file /etc/ssl/certs/NetLock_Arany_=Class_Gold=_F?tan?s?tv?ny.pem. Message:
[2012-07-18 19:53] /etc/ssl/certs/NetLock_Arany_=Class_Gold=_F?tan?s?tv?ny.pem (No such file or directory)
[2012-07-18 19:53] Warning: there was a problem reading the certificate file /etc/ssl/certs/AC_Ra?z_Certic?mara_S.A..pem. Message:
[2012-07-18 19:53] /etc/ssl/certs/AC_Ra?z_Certic?mara_S.A..pem (No such file or directory)
[2012-07-18 19:53] Warning: there was a problem reading the certificate file /etc/ssl/certs/Certinomis_-_Autorit?_Racine.pem. Message:
[2012-07-18 19:53] /etc/ssl/certs/Certinomis_-_Autorit?_Racine.pem (No such file or directory)
[2012-07-18 19:53] Warning: there was a problem reading the certificate file /etc/ssl/certs/T?B?TAK_UEKAE_K?k_Sertifika_Hizmet_Sa?lay?c?s?_-_S?r?m_3.pem. Message:
[2012-07-18 19:53] /etc/ssl/certs/T?B?TAK_UEKAE_K?k_Sertifika_Hizmet_Sa?lay?c?s?_-_S?r?m_3.pem (No such file or directory)
[2012-07-18 19:53] Warning: there was a problem reading the certificate file /etc/ssl/certs/EBG_Elektronik_Sertifika_Hizmet_Sa?lay?c?s?.pem. Message:
[2012-07-18 19:53] /etc/ssl/certs/EBG_Elektronik_Sertifika_Hizmet_Sa?lay?c?s?.pem (No such file or directory)
[2012-07-18 19:53] done.
[2012-07-18 19:53] when you use a non-reparenting window manager
[2012-07-18 19:53] set _JAVA_AWT_WM_NONREPARENTING=1 in
[2012-07-18 19:53] /etc/profile.d/openjdk6.sh
[2012-07-18 19:53] installed openjdk6 (6.b24_1.11.3-1)
[2012-07-18 19:53] upgraded perl (5.16.0-2 -> 5.16.0-2)
[2012-07-18 19:53] upgraded git (1.7.11.2-1 -> 1.7.11.2-1)
[2012-07-18 19:53] upgraded ncurses (5.9-3 -> 5.9-3)
[2012-07-18 19:53] upgraded readline (6.2.003-2 -> 6.2.003-2)
[2012-07-18 19:53] upgraded gnupg (2.0.19-2 -> 2.0.19-2)
[2012-07-18 19:53] upgraded flex (2.5.35-5 -> 2.5.35-5)
[2012-07-18 19:53] upgraded bison (2.5.1-1 -> 2.5.1-1)
[2012-07-18 19:53] installed gperf (3.0.4-4)
[2012-07-18 19:53] installed zip (3.0-3)
[2012-07-18 19:53] installed unzip (6.0-6)
[2012-07-18 19:53] installed wxgtk (2.8.12.1-3)
[2012-07-18 19:53] installed lzo2 (2.06-1)
[2012-07-18 19:53] installed squashfs-tools (4.2-2)
[2012-07-18 19:53] upgraded libusbx (1.0.12-2 -> 1.0.12-2)
[2012-07-18 19:53] installed libusb-compat (0.1.4-2)
[2012-07-18 19:53] Running 'pacman -S -- esdl schedtool'
[2012-07-18 19:54] installed erlang (R15B01-1)
[2012-07-18 19:54] installed sdl (1.2.15-1)
[2012-07-18 19:54] installed dri2proto (2.6-1)
[2012-07-18 19:54] installed glproto (1.4.15-1)
[2012-07-18 19:54] installed mesa (8.0.4-1)
[2012-07-18 19:54] installed esdl (2:1.2-1)
[2012-07-18 19:54] installed schedtool (1.3.0-2)
[2012-07-18 19:55] Running 'pacman -U pngcrush-1.7.31-1-x86_64.pkg.tar.xz'
[2012-07-18 19:55] installed pngcrush (1.7.31-1)
[2012-07-18 19:55] Running 'pacman -U repo-1.17-1-x86_64.pkg.tar.xz'
[2012-07-18 19:55] installed repo (1.17-1)
[2012-07-18 19:59] Running 'pacman -S terminator'
[2012-07-18 19:59] installed vte-common (0.32.2-1)
[2012-07-18 19:59] installed vte (0.28.2-3)
[2012-07-18 19:59] installed libglade (2.6.4-3)
[2012-07-18 19:59] installed python2-cairo (1.10.0-1)
[2012-07-18 19:59] installed pygobject2-devel (2.28.6-6)
[2012-07-18 19:59] installed python2-gobject2 (2.28.6-6)
[2012-07-18 19:59] installed pygtk (2.24.0-3)
[2012-07-18 19:59] installed terminator (0.96-1)
[2012-07-18 20:00] Running 'pacman -Sy gcc-multilib gcc-libs-multilib binutils-multilib libtool-multilib lib32-libusb lib32-libusb-compat lib32-readline lib32-glibc lib32-zlib'
[2012-07-18 20:00] synchronizing package lists
[2012-07-18 20:00] Running 'pacman -Sy gcc-multilib gcc-libs-multilib binutils-multilib libtool-multilib lib32-libusb-compat lib32-readline lib32-glibc lib32-zlib'
[2012-07-18 20:00] synchronizing package lists
[2012-07-18 20:00] Running 'pacman -Sy gcc-multilib gcc-libs-multilib binutils-multilib libtool-multilib lib32-readline lib32-glibc lib32-zlib'
[2012-07-18 20:00] synchronizing package lists
[2012-07-18 20:01] removed gcc-libs (4.7.1-4)
[2012-07-18 20:01] removed binutils (2.22-9)
[2012-07-18 20:01] removed gcc (4.7.1-4)
[2012-07-18 20:01] removed libtool (2.4.2-6)
[2012-07-18 20:01] installed gcc-libs-multilib (4.7.1-4.1)
[2012-07-18 20:01] installed binutils-multilib (2.22-8)
[2012-07-18 20:01] installed gcc-multilib (4.7.1-4.1)
[2012-07-18 20:01] upgraded lib32-glibc (2.16.0-2 -> 2.16.0-2)
[2012-07-18 20:01] installed lib32-libltdl (2.4.2-6)
[2012-07-18 20:01] installed libtool-multilib (2.4.2-6)
[2012-07-18 20:01] installed lib32-ncurses (5.9-1)
[2012-07-18 20:01] installed lib32-readline (6.2.003-1)
[2012-07-18 20:01] upgraded lib32-zlib (1.2.7-1 -> 1.2.7-1)
[2012-07-18 20:07] Running 'pacman -S ssh'
[2012-07-18 20:10] Running 'pacman -S ssh-keygen'
[2012-07-18 20:10] Running 'pacman -S openssh'
[2012-07-18 20:10] installed libedit (20120311_3.0-1)
[2012-07-18 20:10] installed dnssec-anchors (20120422-1)
[2012-07-18 20:10] installed ldns (1.6.13-1)
[2012-07-18 20:10] installed openssh (6.0p1-3)
[2012-07-18 20:11] Running 'pacman -S pbcopy'
[2012-07-18 20:11] Running 'pacman -S copy'
[2012-07-18 20:13] Running 'pacman -S gedit'
[2012-07-18 20:13] installed lcms2 (2.3-2)
[2012-07-18 20:13] installed libgusb (0.1.3-1)
[2012-07-18 20:13] installed gd (2.0.36RC1-5)
[2012-07-18 20:13] installed libgphoto2 (2.4.14-1)
[2012-07-18 20:13] installed libieee1284 (0.2.11-4)
[2012-07-18 20:13] installed v4l-utils (0.8.8-1)
[2012-07-18 20:13] installed net-snmp (5.7.1-3)
[2012-07-18 20:13] NOTE
[2012-07-18 20:13] ----
[2012-07-18 20:13] Add your user to group 'scanner' to use scanner devices.
[2012-07-18 20:13] installed sane (1.0.22-9)
[2012-07-18 20:13] installed shared-color-profiles (0.1.5-1)
[2012-07-18 20:13] installed colord (0.1.21-2)
[2012-07-18 20:13] installed gtk3 (3.4.3-1)
[2012-07-18 20:13] installed gtksourceview3 (3.4.2-1)
[2012-07-18 20:13] installed libpeas (1.4.0-2)
[2012-07-18 20:13] installed enchant (1.6.0-4)
[2012-07-18 20:13] installed pygobject-devel (3.2.2-1)
[2012-07-18 20:13] installed python2-gobject (3.2.2-1)
[2012-07-18 20:13] installed dconf (0.12.1-2)
[2012-07-18 20:13] installed gedit (3.4.2-1)
[2012-07-18 20:15] Running 'pacman -S python'
[2012-07-18 20:16] installed python (3.2.3-3)
[2012-07-18 20:26] Running 'pacman -S xclip'
[2012-07-18 20:26] installed xclip (0.12-3)
[2012-07-18 20:37] Running 'pacman --noconfirm --asdeps -S -- lib32-alsa-lib lib32-libstdc++5 lib32-openal lib32-sdl swt'
[2012-07-18 20:37] installed lib32-alsa-lib (1.0.25-1)
[2012-07-18 20:37] installed lib32-libstdc++5 (3.3.6-6)
[2012-07-18 20:37] installed openal (1.14-1)
[2012-07-18 20:37] installed lib32-openal (1.14-1)
[2012-07-18 20:37] installed lib32-libxrender (0.9.7-1)
[2012-07-18 20:37] installed lib32-sdl (1.2.15-2)
[2012-07-18 20:37] installed swt (3.7.2-1)
[2012-07-18 20:45] Running 'pacman --asdeps -U android-sdk-r20-2-x86_64.pkg.tar.xz'
[2012-07-18 20:50] You need to source /etc/profile or relogin to add the Android SDK tools to your path.
[2012-07-18 20:50] The android group has been removed, install android packages as root.
[2012-07-18 20:50] installed android-sdk (r20-2)
[2012-07-18 20:51] Running 'pacman -U android-sdk-r20-2-x86_64.pkg.tar.xz'
[2012-07-18 20:54] You need to source /etc/profile or relogin to add the Android SDK tools to your path.
[2012-07-18 20:54] The android group has been removed, install android packages as root.
[2012-07-18 20:54] upgraded android-sdk (r20-2 -> r20-2)
[2012-07-18 20:59] Running 'pacman -U android-sdk-platform-tools-r12-1-any.pkg.tar.xz'
[2012-07-18 20:59] installed android-sdk-platform-tools (r12-1)
[2012-07-18 21:10] Running 'pacman -S perl-switch'
[2012-07-18 21:10] installed perl-switch (2.16-1)
[2012-07-21 03:29] Running 'pacman -S flashplugin'
[2012-07-21 03:29] relogin or source /etc/profile.d/mozilla-common.sh
[2012-07-21 03:29] installed mozilla-common (1.4-3)
[2012-07-21 03:29] >>
[2012-07-21 03:29] >> If you have an NVIDIA card that supports libvdpau or Broadcom Crystal HD chips,
[2012-07-21 03:29] >> uncomment EnableLinuxHWVideoDecode=1 from /etc/adobe/mms.cfg.
[2012-07-21 03:29] >> If you run into problems, please contact nVidia or Broadcom along with your system config info / driver version.
[2012-07-21 03:29] >>
[2012-07-21 03:29] installed flashplugin (11.2.202.236-1)
[2012-07-21 03:32] Running 'pacman -S libvdpau'
[2012-07-21 03:32] installed libvdpau (0.4.1-2)
[2012-07-21 14:53] Running 'pacman -S gedit-common'
[2012-07-21 14:55] Running 'pacman -S gtk-theme-switch2'
[2012-07-21 14:56] installed gtk-theme-switch2 (2.1.0-2)
[2012-07-21 15:00] Running 'pacman -S gtk-icons'
[2012-07-21 15:04] Running 'pacman -R gtk-theme-switch2 gedit dconf desktop-file-utils enchant gsettings-desktop-schemas gtksourceview3 iso-codes libpeas libsm python2-gobject'
[2012-07-21 15:06] Running 'pacman -R gtk-theme-switch2 gedit dconf enchant gtksourceview3 iso-codes libpeas python2-gobject'
[2012-07-21 15:06] removed gedit (3.4.2-1)
[2012-07-21 15:06] removed python2-gobject (3.2.2-1)
[2012-07-21 15:06] removed libpeas (1.4.0-2)
[2012-07-21 15:06] removed iso-codes (3.34-1)
[2012-07-21 15:06] removed gtksourceview3 (3.4.2-1)
[2012-07-21 15:06] removed enchant (1.6.0-4)
[2012-07-21 15:06] removed dconf (0.12.1-2)
[2012-07-21 15:06] removed gtk-theme-switch2 (2.1.0-2)
[2012-07-21 15:06] Running 'pacman -R glib-networking gsettings-desktop-schemas'
[2012-07-21 15:06] Running 'pacman -R libsoup glib-networking gsettings-desktop-schemas'
[2012-07-21 15:06] removed libsoup (2.38.1-1)
[2012-07-21 15:06] removed glib-networking (2.32.3-1)
[2012-07-21 15:06] removed gsettings-desktop-schemas (3.4.2-1)
[2012-07-21 15:07] Running 'pacman -R wxgtk'
[2012-07-21 15:07] removed wxgtk (2.8.12.1-3)
[2012-07-21 15:07] Running 'pacman -R libxt libsm'
[2012-07-21 15:11] Running 'pacman -S ranger'
[2012-07-21 15:11] installed ranger (1.5.4-1)
[2012-07-21 15:32] Running 'pacman -S irssi'
[2012-07-21 15:32] installed irssi (0.8.15-6)
[2012-07-24 20:20] Running 'pacman -U sublime-text-2.0.1-1-x86_64.pkg.tar.xz'
[2012-07-24 20:20] installed sublime-text (2.0.1-1)
[2012-07-24 23:41] Running 'pacman -U dropbox-1.4.11-1-x86_64.pkg.tar.xz'
[2012-07-24 23:41] installed dropbox (1.4.11-1)
[2012-07-24 23:41] Running 'pacman -U dropbox-daemon-0.8-8-any.pkg.tar.xz'
[2012-07-24 23:41] >> Configure the Dropbox daemon script by editing /etc/conf.d/dropboxd.conf
[2012-07-24 23:41] installed dropbox-daemon (0.8-8)
[2012-07-24 23:48] Running 'pacman -U dropbox-cli-1-12-x86_64.pkg.tar.xz'
[2012-07-24 23:48] installed dropbox-cli (1-12)
[2012-07-24 23:49] Running 'pacman -S nautilus'
[2012-07-24 23:56] Running 'pacman -S ranger'
[2012-07-24 23:57] upgraded ranger (1.5.4-1 -> 1.5.4-1)
[2012-07-25 00:23] Running 'pacman --noconfirm --asdeps -S -- gconf qt qtwebkit'
[2012-07-25 00:23] Running 'pacman --noconfirm --asdeps -S -- gconf qt qtwebkit'
[2012-07-25 00:23] Running 'pacman -Sy'
[2012-07-25 00:23] synchronizing package lists
[2012-07-25 00:24] Running 'pacman --noconfirm --asdeps -S -- gconf qt qtwebkit'
[2012-07-25 00:25] installed gconf (3.2.5-2)
[2012-07-25 00:25] installed libmng (1.0.10-4)
[2012-07-25 00:25] installed qt (4.8.2-3)
[2012-07-25 00:25] installed qtwebkit (2.2.2-1)
[2012-07-25 00:27] Running 'pacman --asdeps -U openssl098-0.9.8.x-1-x86_64.pkg.tar.xz'
[2012-07-25 00:27] installed openssl098 (0.9.8.x-1)
[2012-07-25 00:28] Running 'pacman --asdeps -U libpng12-1.2.49-1-x86_64.pkg.tar.xz'
[2012-07-25 00:28] installed libpng12 (1.2.49-1)
[2012-07-25 00:30] Running 'pacman -U spotify-0.8.4.103-1-x86_64.pkg.tar.xz'
[2012-07-25 00:31] installed spotify (0.8.4.103-1)
[2012-07-29 16:57] Running 'pacman --noconfirm --asdeps -S -- ffmpeg libmediainfo mencoder mplayer'
[2012-07-29 16:58] Running 'pacman --noconfirm --asdeps -S -- ffmpeg libmediainfo mencoder mplayer'
[2012-07-29 16:58] Running 'pacman -Syy'
[2012-07-29 16:58] synchronizing package lists
[2012-07-29 17:00] Running 'pacman --noconfirm --asdeps -S -- ffmpeg libmediainfo mencoder mplayer'
[2012-07-29 17:00] installed gsm (1.0.13-7)
[2012-07-29 17:00] installed lame (3.99.5-1)
[2012-07-29 17:00] installed libasyncns (0.8-4)
[2012-07-29 17:00] installed json-c (0.9-1)
[2012-07-29 17:00] installed libpulse (2.1-1)
[2012-07-29 17:00] installed libtheora (1.1.1-2)
[2012-07-29 17:00] installed libglapi (8.0.4-2)
[2012-07-29 17:00] installed khrplatform-devel (8.0.4-2)
[2012-07-29 17:00] installed libegl (8.0.4-2)
[2012-07-29 17:00] installed libva (1.1.0-1)
[2012-07-29 17:00] installed libvpx (1.1.0-1)
[2012-07-29 17:00] installed opencore-amr (0.1.3-1)
[2012-07-29 17:00] installed openjpeg (1.5.0-1)
[2012-07-29 17:00] installed rtmpdump (2.4-1)
[2012-07-29 17:00] installed schroedinger (1.0.11-1)
[2012-07-29 17:00] installed speex (1.2rc1-2)
[2012-07-29 17:00] installed x264 (20120705-1)
[2012-07-29 17:00] installed xvidcore (1.3.2-1)
[2012-07-29 17:00] installed ffmpeg (1:0.11.1-1)
[2012-07-29 17:00] installed libmms (0.6.2-1)
[2012-07-29 17:00] installed libzen (0.4.26-1)
[2012-07-29 17:00] installed libmediainfo (0.7.58-1)
[2012-07-29 17:00] installed recode (3.6-7)
[2012-07-29 17:00] installed enca (1.13-2)
[2012-07-29 17:00] installed a52dec (0.7.4-6)
[2012-07-29 17:00] installed libdca (0.0.5-3)
[2012-07-29 17:00] installed talloc (2.0.7-1)
[2012-07-29 17:00] installed libwbclient (3.6.6-1)
[2012-07-29 17:00] installed libcap-ng (0.6.6-1)
[2012-07-29 17:00] installed cifs-utils (5.5-1)
[2012-07-29 17:00] installed tdb (1.2.9-2)
[2012-07-29 17:00] installed smbclient (3.6.6-1)
[2012-07-29 17:00] installed libmad (0.15.1b-6)
[2012-07-29 17:00] installed fribidi (0.19.2-2)
[2012-07-29 17:00] installed libmp4v2 (2.0.0-2)
[2012-07-29 17:00] installed faac (1.28-4)
[2012-07-29 17:00] installed faad2 (2.7-3)
[2012-07-29 17:00] installed mpg123 (1.14.4-1)
[2012-07-29 17:00] installed libass (0.10.0-3)
[2012-07-29 17:00] installed libbluray (0.2.2-1)
[2012-07-29 17:00] installed libcddb (1.3.2-3)
[2012-07-29 17:00] installed libcdio (0.83-1)
[2012-07-29 17:00] installed mencoder (35014-1)
[2012-07-29 17:00] installed libftdi (0.20-1)
[2012-07-29 17:00] installed libirman (0.4.5-3)
[2012-07-29 17:00] installed lirc-utils (1:0.9.0-22)
[2012-07-29 17:00] installed gpm (1.20.6-10)
[2012-07-29 17:00] installed aalib (1.4rc5-9)
[2012-07-29 17:00] installed jack (0.121.3-6)
[2012-07-29 17:00] installed libcaca (0.99.beta18-1)
[2012-07-29 17:00] installed xf86dgaproto (2.1-2)
[2012-07-29 17:00] installed libxxf86dga (1.1.3-1)
[2012-07-29 17:00] installed mplayer (35014-1)
[2012-07-29 17:00] Running 'pacman -U pms-1.60.0-1-x86_64.pkg.tar.xz'
[2012-07-29 17:00] installed pms (1.60.0-1)
[2012-07-29 17:20] Running 'pacman -S netstat'
[2012-07-29 17:31] Running 'pacman -S ntfs-3g'
[2012-07-29 17:31] installed fuse (2.9.0-1)
[2012-07-29 17:31] installed ntfs-3g (2012.1.15-3)
[2012-07-29 17:45] Running 'pacman -S tsmuxer'
[2012-07-29 17:45] Running 'pacman -S tsMuxeR'
[2012-07-29 17:45] Running 'pacman --noconfirm --asdeps -S -- lib32-freetype2'
[2012-07-29 17:45] installed lib32-bzip2 (1.0.6-1)
[2012-07-29 17:45] installed lib32-freetype2 (2.4.10-1)
[2012-07-29 17:48] Running 'pacman -U tsmuxer-1.10.6-12-x86_64.pkg.tar.xz'
[2012-07-29 17:48] The tsmuxer package is licensed software.
[2012-07-29 17:48] You MUST read and agree to the license stored in
[2012-07-29 17:48] /opt/tsmuxer/LICENSE before using it.
[2012-07-29 17:48] installed tsmuxer (1.10.6-12)
[2012-07-29 18:23] Running 'pacman -S icedtea-web-java7'
[2012-07-29 18:23] Running 'pacman -S icedtea-web-java6'
[2012-07-29 18:24] Running 'pacman -S openjre'
[2012-07-29 18:25] Running 'pacman -S jre'
[2012-07-29 18:25] Running 'pacman -S icetea-plugin'
[2012-07-29 18:27] Running 'pacman -S icedtea-web'
[2012-07-29 18:27] installed icedtea-web (1.2-1)
[2012-07-29 18:35] Running 'pacman -S ccache'
[2012-07-29 18:35] installed ccache (3.1.7-1)
[2012-07-29 18:50] Running 'pacman -S rtorrent'
[2012-07-29 18:50] installed libsigc++ (2.2.10-2)
[2012-07-29 18:50] installed libtorrent (0.13.2-2)
[2012-07-29 18:50] installed xmlrpc-c (1:1.31.02-2)
[2012-07-29 18:50] installed rtorrent (0.9.2-2)
[2012-07-29 18:52] Running 'pacman -S rutorrent'
[2012-07-29 18:52] Running 'pacman --noconfirm --asdeps -S -- php'
[2012-07-29 18:52] installed php (5.4.5-1)
[2012-07-29 18:52] Running 'pacman -U rutorrent-3.4-2-any.pkg.tar.xz'
[2012-07-29 18:53] installed rutorrent (3.4-2)
[2012-07-29 18:53] Running 'pacman -R rtorrent'
[2012-07-29 18:53] removed rtorrent (0.9.2-2)
[2012-07-29 18:53] Running 'pacman -S rtorrent-svn'
[2012-07-29 18:54] Running 'pacman -S rtorrent'
[2012-07-29 18:54] installed rtorrent (0.9.2-2)
[2012-07-29 18:54] Running 'pacman -S apache php-apache php-cgi mod-scgi php-xsl rutorrent-plugins php-geoip screen'
[2012-07-29 18:55] Running 'pacman -S apache php-apache php-cgi php-xsl rutorrent-plugins php-geoip screen'
[2012-07-29 18:55] Running 'pacman -S apache php-apache php-cgi php-xsl php-geoip screen'
[2012-07-29 18:55] installed apr (1.4.6-1)
[2012-07-29 18:55] installed unixodbc (2.3.1-1)
[2012-07-29 18:55] installed apr-util (1.4.1-1)
[2012-07-29 18:55] installed apache (2.2.22-4)
[2012-07-29 18:55] installed php-apache (5.4.5-1)
[2012-07-29 18:55] installed php-cgi (5.4.5-1)
[2012-07-29 18:55] installed php-xsl (5.4.5-1)
[2012-07-29 18:55] installed geoip-database (20120706-1)
[2012-07-29 18:55] installed geoip (1.4.8-2)
[2012-07-29 18:55] installed php-geoip (1.0.8-2)
[2012-07-29 18:55] installed screen (4.0.3-13)
[2012-07-29 19:03] Running 'pacman -U mod_scgi-1.14-1-x86_64.pkg.tar.xz'
[2012-07-29 19:03] installed mod_scgi (1.14-1)
[2012-07-29 19:03] Running 'pacman -U rutorrent-plugins-3.4-2-any.pkg.tar.xz'
[2012-07-29 19:03] installed rutorrent-plugins (3.4-2)
[2012-07-29 19:04] Running 'pacman -U rutorrent-3.4-2-any.pkg.tar.xz'
[2012-07-29 19:04] upgraded rutorrent (3.4-2 -> 3.4-2)
[2012-07-29 19:46] Running 'pacman -S unrar unzip'
[2012-07-29 19:46] installed unrar (4.2.4-1)
[2012-07-29 19:46] upgraded unzip (6.0-6 -> 6.0-6)
[2012-07-29 20:00] Running 'pacman -S php-apache mysql'
[2012-07-29 20:02] upgraded php-apache (5.4.5-1 -> 5.4.5-1)
[2012-07-29 20:02] installed libmysqlclient (5.5.25.a-1)
[2012-07-29 20:02] installed mysql-clients (5.5.25.a-1)
[2012-07-29 20:02] Installing MySQL system tables...
[2012-07-29 20:02] OK
[2012-07-29 20:02] Filling help tables...
[2012-07-29 20:02] OK
[2012-07-29 20:02]
[2012-07-29 20:02] To start mysqld at boot time you have to copy
[2012-07-29 20:02] support-files/mysql.server to the right place for your system
[2012-07-29 20:02]
[2012-07-29 20:02] PLEASE REMEMBER TO SET A PASSWORD FOR THE MySQL root USER !
[2012-07-29 20:02] To do so, start the server, then issue the following commands:
[2012-07-29 20:02]
[2012-07-29 20:02] /usr/bin/mysqladmin -u root password 'new-password'
[2012-07-29 20:02] /usr/bin/mysqladmin -u root -h arch-shauder password 'new-password'
[2012-07-29 20:02]
[2012-07-29 20:02] Alternatively you can run:
[2012-07-29 20:02] /usr/bin/mysql_secure_installation
[2012-07-29 20:02]
[2012-07-29 20:02] which will also give you the option of removing the test
[2012-07-29 20:02] databases and anonymous user created by default. This is
[2012-07-29 20:02] strongly recommended for production servers.
[2012-07-29 20:02]
[2012-07-29 20:02] See the manual for more instructions.
[2012-07-29 20:02]
[2012-07-29 20:02] You can start the MySQL daemon with:
[2012-07-29 20:02] cd /usr ; /usr/bin/mysqld_safe &
[2012-07-29 20:02]
[2012-07-29 20:02] You can test the MySQL daemon with mysql-test-run.pl
[2012-07-29 20:02] cd /usr/mysql-test ; perl mysql-test-run.pl
[2012-07-29 20:02]
[2012-07-29 20:02] Please report any problems with the /usr/scripts/mysqlbug script!
[2012-07-29 20:02]
[2012-07-29 20:02] installed mysql (5.5.25.a-1)
[2012-07-29 20:49] Running 'pacman -Syyu'
[2012-07-29 20:49] synchronizing package lists
[2012-07-29 20:50] starting full system upgrade
[2012-07-29 20:52] upgraded readline (6.2.003-2 -> 6.2.004-1)
[2012-07-29 20:52] upgraded bash (4.2.036-1 -> 4.2.037-1)
[2012-07-29 20:52] upgraded bison (2.5.1-1 -> 2.6-1)
[2012-07-29 20:52] upgraded lib32-gcc-libs (4.7.1-4.1 -> 4.7.1-5)
[2012-07-29 20:52] upgraded gcc-libs-multilib (4.7.1-4.1 -> 4.7.1-5)
[2012-07-29 20:52] upgraded gnutls (3.0.21-1 -> 3.0.21-2)
[2012-07-29 20:52] upgraded libpng (1.5.11-1 -> 1.5.12-1)
[2012-07-29 20:52] upgraded libcups (1.5.3-5 -> 1.5.4-1)
[2012-07-29 20:52] upgraded gtk-update-icon-cache (2.24.10-3 -> 2.24.11-2)
[2012-07-29 20:52] upgraded gtk2 (2.24.10-3 -> 2.24.11-2)
[2012-07-29 20:52] upgraded chromium (20.0.1132.57-1 -> 20.0.1132.57-2)
[2012-07-29 20:52] warning: /etc/protocols installed as /etc/protocols.pacnew
[2012-07-29 20:52] warning: /etc/services installed as /etc/services.pacnew
[2012-07-29 20:52] upgraded iana-etc (2.30-2 -> 2.30-3)
[2012-07-29 20:52] upgraded filesystem (2012.6-4 -> 2012.7-1)
[2012-07-29 20:52] upgraded libsystemd (186-2 -> 187-2)
[2012-07-29 20:52] upgraded glib2 (2.32.3-1 -> 2.32.4-1)
[2012-07-29 20:52] upgraded systemd-tools (186-2 -> 187-2)
[2012-07-29 20:52] upgraded dbus-core (1.6.2-2 -> 1.6.4-1)
[2012-07-29 20:52] upgraded dbus (1.6.2-1 -> 1.6.4-1)
[2012-07-29 20:52] upgraded flex (2.5.35-5 -> 2.5.36-1)
[2012-07-29 20:52] upgraded gcc-multilib (4.7.1-4.1 -> 4.7.1-5)
[2012-07-29 20:52] upgraded git (1.7.11.2-1 -> 1.7.11.3-1)
[2012-07-29 20:52] upgraded glproto (1.4.15-1 -> 1.4.16-1)
[2012-07-29 20:52] upgraded gtk3 (3.4.3-1 -> 3.4.4-1)
[2012-07-29 20:52] upgraded icu (49.1.2-1 -> 49.1.2-2)
[2012-07-29 20:52] warning: /etc/rc.conf installed as /etc/rc.conf.pacnew
[2012-07-29 20:52] upgraded initscripts (2012.06.3-2 -> 2012.07.5-1)
[2012-07-29 20:52] upgraded lib32-readline (6.2.003-1 -> 6.2.004-1)
[2012-07-29 20:52] >>> Updating module dependencies. Please wait ...
[2012-07-29 20:52] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2012-07-29 20:52] ==> Building image from preset: 'default'
[2012-07-29 20:52] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2012-07-29 20:52] ==> Starting build: 3.4.6-1-ARCH
[2012-07-29 20:52] -> Running build hook: [base]
[2012-07-29 20:52] -> Running build hook: [udev]
[2012-07-29 20:52] -> Running build hook: [autodetect]
[2012-07-29 20:52] -> Running build hook: [pata]
[2012-07-29 20:52] -> Running build hook: [scsi]
[2012-07-29 20:52] -> Running build hook: [sata]
[2012-07-29 20:52] -> Running build hook: [filesystems]
[2012-07-29 20:52] -> Running build hook: [usbinput]
[2012-07-29 20:52] -> Running build hook: [fsck]
[2012-07-29 20:52] ==> Generating module dependencies
[2012-07-29 20:52] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
[2012-07-29 20:52] ==> Image generation successful
[2012-07-29 20:52] ==> Building image from preset: 'fallback'
[2012-07-29 20:52] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
[2012-07-29 20:52] ==> Starting build: 3.4.6-1-ARCH
[2012-07-29 20:52] -> Running build hook: [base]
[2012-07-29 20:52] -> Running build hook: [udev]
[2012-07-29 20:52] -> Running build hook: [pata]
[2012-07-29 20:52] -> Running build hook: [scsi]
[2012-07-29 20:52] -> Running build hook: [sata]
[2012-07-29 20:52] -> Running build hook: [filesystems]
[2012-07-29 20:52] -> Running build hook: [usbinput]
[2012-07-29 20:52] -> Running build hook: [fsck]
[2012-07-29 20:52] ==> Generating module dependencies
[2012-07-29 20:52] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
[2012-07-29 20:52] ==> Image generation successful
[2012-07-29 20:52] upgraded linux (3.4.5-1 -> 3.4.6-1)
[2012-07-29 20:52] upgraded linux-api-headers (3.4.4-1 -> 3.4.6-1)
[2012-07-29 20:52] upgraded mesa (8.0.4-1 -> 8.0.4-2)
[2012-07-29 20:52] upgraded nvidia (302.17-3 -> 302.17-4)
[2012-07-29 20:52] upgraded tzdata (2012c-1 -> 2012d-1)
[2012-07-29 20:52] upgraded xf86-input-evdev (2.7.0-2 -> 2.7.1-1)
[2012-08-03 12:40] Running 'pacman -S filezilla'
[2012-08-03 12:40] installed wxgtk (2.8.12.1-3)
[2012-08-03 12:40] installed libidn (1.25-1)
[2012-08-03 12:40] installed filezilla (3.5.3-1)
[2012-08-06 13:55] Running 'pacman -R openjdk'
[2012-08-06 13:55] Running 'pacman -R openjdk6'
[2012-08-06 13:55] Running 'pacman -R icedtea-web'
[2012-08-06 13:55] removed icedtea-web (1.2-1)
[2012-08-06 13:56] Running 'pacman -S jdk'
[2012-08-06 13:57] Running 'pacman --asdeps -U jre-7.5-2-x86_64.pkg.tar.xz'
[2012-08-06 13:58] removed openjdk6 (6.b24_1.11.3-1)
[2012-08-06 13:58]
[2012-08-06 13:58] The jre package is licensed software.
[2012-08-06 13:58] You MUST read and agree to the license stored in
[2012-08-06 13:58] /usr/share/licenses/jre/LICENSE before using it.
[2012-08-06 13:58] Please relogin to include jre in your PATH.
[2012-08-06 13:58]
[2012-08-06 13:58] installed jre (7.5-2)
[2012-08-06 14:01] Running 'pacman -U jdk-7.5-2-x86_64.pkg.tar.xz'
[2012-08-06 14:01]
[2012-08-06 14:01] The jdk package is licensed software.
[2012-08-06 14:01] You MUST read and agree to the license stored in
[2012-08-06 14:01] /usr/share/licenses/jdk/LICENSE before using it.
[2012-08-06 14:01] Please relogin to include jdk in your PATH.
[2012-08-06 14:01]
[2012-08-06 14:01] installed jdk (7.5-2)
[2012-08-06 14:14] Running 'pacman --asdeps -U jre6-6u33-b04-x86_64.pkg.tar.xz'
[2012-08-06 14:15] Running 'pacman -R jdk jre'
[2012-08-06 14:16] Running 'pacman -U jre6-6u33-b04-x86_64.pkg.tar.xz'
[2012-08-06 14:17] Running 'pacman -Rdd jdk jre'
[2012-08-06 14:17] removed jdk (7.5-2)
[2012-08-06 14:17] removed jre (7.5-2)
[2012-08-06 14:19] Running 'pacman --asdeps -U jre6-6u33-b04-x86_64.pkg.tar.xz'
[2012-08-06 14:19] The jre package is licensed software.
[2012-08-06 14:19] You MUST read and agree to the license stored in
[2012-08-06 14:19] /opt/java/jre/LICENSE before using it.
[2012-08-06 14:19] Please relogin to include jre in your PATH.
[2012-08-06 14:19] installed jre6 (6u33-b04)
[2012-08-06 14:21] Running 'pacman -U jdk6-6u33-b04-x86_64.pkg.tar.xz'
[2012-08-06 14:21] The jdk package is licensed software.
[2012-08-06 14:21] You MUST read and agree to the license stored in
[2012-08-06 14:21] /opt/java/LICENSE before using it.
[2012-08-06 14:21] Please relogin to include jdk in your PATH
[2012-08-06 14:21] installed jdk6 (6u33-b04)
[2012-08-06 14:23] Running 'pacman -U jre6-6u33-b04-x86_64.pkg.tar.xz'
[2012-08-06 14:54] upgraded jre6 (6u33-b04 -> 6u33-b04)
[2012-08-06 17:23] Running 'pacman -S gimp'
[2012-08-06 17:23] installed lcms (1.19-2)
[2012-08-06 17:23] Updating font cache... done.
[2012-08-06 17:23] installed gsfonts (1.0.7pre44-3)
[2012-08-06 17:23] installed libwmf (0.2.8.4-9)
[2012-08-06 17:23] installed libcroco (0.6.5-1)
[2012-08-06 17:23] installed librsvg (2.36.1-1)
[2012-08-06 17:23] installed babl (0.1.10-1)
[2012-08-06 17:23] installed gegl (0.2.0-2)
[2012-08-06 17:23] installed freeglut (2.8.0-1)
[2012-08-06 17:23] installed jasper (1.900.1-7)
[2012-08-06 17:23] installed gimp (2.8.0-2)
[2012-08-06 18:25] Running 'pacman -Sy'
[2012-08-06 18:25] synchronizing package lists
[2012-08-06 18:25] Running 'pacman -S yaourt'
[2012-08-06 18:28] Running 'pacman -Sy'
[2012-08-06 18:28] synchronizing package lists
[2012-08-06 18:28] Running 'pacman -S lib32-gcc-libs lib32-glibc lib32-libx11 lib32-libxau lib32-libxcb lib32-libxdmcp lib32-libxext lib32-libxrender lib32-alsa-lib lib32-libstdc++5 lib32-libxv lib32-ncurses lib32-openal lib32-sdl lib32-zlib swt'
[2012-08-06 18:29] Running 'pacman -Sy'
[2012-08-06 18:29] synchronizing package lists
[2012-08-06 18:29] Running 'pacman -S lib32-gcc-libs lib32-glibc lib32-libx11 lib32-libxau lib32-libxcb lib32-libxdmcp lib32-libxext lib32-libxrender lib32-alsa-lib lib32-libstdc++5 lib32-libxv lib32-ncurses lib32-openal lib32-sdl lib32-zlib swt'
[2012-08-06 18:32] Running 'pacman --noconfirm --asdeps -S -- yajl'
[2012-08-06 21:50] Running 'pacman -U jdk6-6u33-b04-x86_64.pkg.tar.xz'
[2012-08-06 21:51] Running 'pacman -Rdd jdk6 jre6'
[2012-08-06 21:51] removed jdk6 (6u33-b04)
[2012-08-06 21:51] removed jre6 (6u33-b04)
[2012-08-06 21:54] Running 'pacman -U sun-java6-6u32-1-x86_64.pkg.tar.xz'
[2012-08-06 21:54] The sun-java6 package is licensed software.
[2012-08-06 21:54] You MUST read and agree to the license stored in
[2012-08-06 21:54] /opt/sun-java6/LICENSE before using it.
[2012-08-06 21:54]
[2012-08-06 21:54] Use '. /opt/sun-java6/envsetup.sh' to setup environment.
[2012-08-06 21:54] installed sun-java6 (6u32-1)
[2012-08-06 21:59] Running 'pacman -Syu'
[2012-08-06 21:59] synchronizing package lists
[2012-08-06 21:59] starting full system upgrade
[2012-08-06 22:00] Running 'pacman -Sy'
[2012-08-06 22:00] synchronizing package lists
[2012-08-06 22:00] Running 'pacman -S yaourt'
[2012-08-06 22:00] installed yajl (2.0.4-1)
[2012-08-06 22:00] installed package-query (1.0.1-1)
[2012-08-06 22:00] installed yaourt (1.1-1)
[2012-08-06 22:00] Running 'pacman -S extra/schedtool community/esdl'
[2012-08-06 22:00] upgraded schedtool (1.3.0-2 -> 1.3.0-2)
[2012-08-06 22:00] upgraded esdl (2:1.2-1 -> 2:1.2-1)
[2012-08-06 22:00] Running 'pacman -S extra/schedtool community/esdl'
[2012-08-06 22:00] upgraded schedtool (1.3.0-2 -> 1.3.0-2)
[2012-08-06 22:00] upgraded esdl (2:1.2-1 -> 2:1.2-1)
[2012-08-06 22:00] Running 'pacman -S --asdeps --needed extra/jdk7-openjdk'
[2012-08-06 22:01] installed java-rhino (1.7R3-3)
[2012-08-06 22:01] installed jre7-openjdk-headless (7.u5_2.2.1-1)
[2012-08-06 22:01] when you use a non-reparenting window manager
[2012-08-06 22:01] set _JAVA_AWT_WM_NONREPARENTING=1 in
[2012-08-06 22:01] /etc/profile.d/jre.sh
[2012-08-06 22:01] installed jre7-openjdk (7.u5_2.2.1-1)
[2012-08-06 22:01] installed jdk7-openjdk (7.u5_2.2.1-1)
[2012-08-06 22:02] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.kJz/android-apktool-1.4.9-1-x86_64.pkg.tar.xz'
[2012-08-06 22:02] installed android-apktool (1.4.9-1)
[2012-08-06 22:04] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.ubB/android-sdk-r20.0.1-1-x86_64.pkg.tar.xz'
[2012-08-06 22:05] You need to source /etc/profile or relogin to add the Android SDK tools to your path.
[2012-08-06 22:05] The android group has been removed, install android packages as root.
[2012-08-06 22:05] upgraded android-sdk (r20-2 -> r20.0.1-1)
[2012-08-06 22:08] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.g9s/android-sdk-platform-tools-r14-1-any.pkg.tar.xz'
[2012-08-06 22:08] upgraded android-sdk-platform-tools (r12-1 -> r14-1)
[2012-08-06 22:08] Running 'pacman -S --asdeps --needed extra/libmtp'
[2012-08-06 22:08] installed libmtp (1.1.3-1)
[2012-08-06 22:08] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.0Uc/android-udev-1.3-4-any.pkg.tar.xz'
[2012-08-06 22:08] ===> In order to use adb, you have to be in the 'adbusers' group
[2012-08-06 22:08] ===> For that, use: gpasswd -a USERNAME adbusers
[2012-08-06 22:08] installed android-udev (1.3-4)
[2012-08-06 22:08] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.n8w/fastboot-20110628-2-any.pkg.tar.xz'
[2012-08-06 22:08] installed fastboot (20110628-2)
[2012-08-06 22:09] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.aCT/pngcrush-1.7.35-1-x86_64.pkg.tar.xz'
[2012-08-06 22:09] upgraded pngcrush (1.7.31-1 -> 1.7.35-1)
[2012-08-06 22:09] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.ZNg/repo-git-20120806-1-x86_64.pkg.tar.xz'
[2012-08-06 22:10] Running 'pacman -S abs base-devel perl git gnupg flex bison gperf zip unzip sdl wxgtk squashfs-tools ncurses libpng zlib libusb libusb-compat readline alsa-lib openal'
[2012-08-06 22:11] Running 'pacman -S lib32-gcc-libs lib32-glibc lib32-libx11 lib32-libxau lib32-libxcb lib32-libxdmcp lib32-libxext lib32-libxrender lib32-alsa-lib lib32-libstdc++5 lib32-libxv lib32-ncurses lib32-openal lib32-sdl lib32-zlib swt'
[2012-08-06 22:11] upgraded lib32-glibc (2.16.0-2 -> 2.16.0-2)
[2012-08-06 22:11] upgraded lib32-gcc-libs (4.7.1-5 -> 4.7.1-5)
[2012-08-06 22:11] upgraded lib32-libxdmcp (1.1.1-1 -> 1.1.1-1)
[2012-08-06 22:11] upgraded lib32-libxau (1.0.7-1 -> 1.0.7-1)
[2012-08-06 22:11] upgraded lib32-libxcb (1.8.1-2 -> 1.8.1-2)
[2012-08-06 22:11] upgraded lib32-libx11 (1.5.0-1 -> 1.5.0-1)
[2012-08-06 22:11] upgraded lib32-libxext (1.3.1-1 -> 1.3.1-1)
[2012-08-06 22:11] upgraded lib32-libxrender (0.9.7-1 -> 0.9.7-1)
[2012-08-06 22:11] upgraded lib32-alsa-lib (1.0.25-1 -> 1.0.25-1)
[2012-08-06 22:11] upgraded lib32-libstdc++5 (3.3.6-6 -> 3.3.6-6)
[2012-08-06 22:11] upgraded lib32-libxv (1.0.7-1 -> 1.0.7-1)
[2012-08-06 22:11] upgraded lib32-ncurses (5.9-1 -> 5.9-1)
[2012-08-06 22:11] upgraded lib32-openal (1.14-1 -> 1.14-1)
[2012-08-06 22:11] upgraded lib32-sdl (1.2.15-2 -> 1.2.15-2)
[2012-08-06 22:11] upgraded lib32-zlib (1.2.7-1 -> 1.2.7-1)
[2012-08-06 22:11] upgraded swt (3.7.2-1 -> 3.7.2-1)
[2012-08-06 22:11] Running 'pacman -S gcc-multilib gcc-libs-multilib binutils-multilib libtool-multilib lib32-readline lib32-glibc lib32-zlib'
[2012-08-06 22:12] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.u2K/lib32-libusb-1.0.9-1-x86_64.pkg.tar.xz'
[2012-08-06 22:12] installed lib32-libusb (1.0.9-1)
[2012-08-06 22:12] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.ENc/lib32-libusb-compat-0.1.4-2-x86_64.pkg.tar.xz'
[2012-08-06 22:12] installed lib32-libusb-compat (0.1.4-2)
[2012-08-06 22:16] Running 'pacman -S ps3mediaserver'
[2012-08-06 22:17] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.WIi/pms-1.60.0-2-x86_64.pkg.tar.xz'
[2012-08-06 22:17] upgraded pms (1.60.0-1 -> 1.60.0-2)
[2012-08-06 22:18] Running 'pacman -Syu'
[2012-08-06 22:18] synchronizing package lists
[2012-08-06 22:18] starting full system upgrade
[2012-08-06 22:18] Running 'pacman -Syu'
[2012-08-06 22:18] synchronizing package lists
[2012-08-06 22:18] starting full system upgrade
[2012-08-06 22:20] upgraded bison (2.6-1 -> 2.6.2-1)
[2012-08-06 22:20] upgraded chromium (20.0.1132.57-2 -> 21.0.1180.57-1)
[2012-08-06 22:20] upgraded libldap (2.4.31-4 -> 2.4.32-1)
[2012-08-06 22:20] upgraded krb5 (1.10.2-2 -> 1.10.2-3)
[2012-08-06 22:20] upgraded cifs-utils (5.5-1 -> 5.6-2)
[2012-08-06 22:20] upgraded cryptsetup (1.4.3-1 -> 1.5.0-1)
[2012-08-06 22:20] upgraded curl (7.26.0-1 -> 7.27.0-1)
[2012-08-06 22:20] upgraded flex (2.5.36-1 -> 2.5.37-1)
[2012-08-06 22:20] upgraded fuse (2.9.0-1 -> 2.9.1-1)
[2012-08-06 22:20] upgraded git (1.7.11.3-1 -> 1.7.11.4-1)
[2012-08-06 22:20] upgraded gnutls (3.0.21-2 -> 3.0.22-1)
[2012-08-06 22:20] upgraded hwids (20120711-1 -> 20120730-1)
[2012-08-06 22:20] upgraded nvidia-utils (302.17-1 -> 304.32-1)
[2012-08-06 22:20] upgraded lib32-nvidia-utils (302.17-1 -> 304.32-1)
[2012-08-06 22:20] upgraded libcups (1.5.4-1 -> 1.6.1-2)
[2012-08-06 22:20] upgraded libmysqlclient (5.5.25.a-1 -> 5.5.27-1)
[2012-08-06 22:20] upgraded libsystemd (187-2 -> 187-4)
[2012-08-06 22:20] upgraded libthai (0.1.17-1 -> 0.1.18-1)
[2012-08-06 22:20] upgraded systemd-tools (187-2 -> 187-4)
[2012-08-06 22:20] upgraded mkinitcpio (0.9.2-2 -> 0.10-1)
[2012-08-06 22:20] >>> Updating module dependencies. Please wait ...
[2012-08-06 22:20] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2012-08-06 22:20] ==> Building image from preset: 'default'
[2012-08-06 22:20] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2012-08-06 22:20] ==> Starting build: 3.4.7-1-ARCH
[2012-08-06 22:20] -> Running build hook: [base]
[2012-08-06 22:20] -> Running build hook: [udev]
[2012-08-06 22:20] -> Running build hook: [autodetect]
[2012-08-06 22:20] -> Running build hook: [pata]
[2012-08-06 22:20] -> Running build hook: [scsi]
[2012-08-06 22:20] -> Running build hook: [sata]
[2012-08-06 22:20] -> Running build hook: [filesystems]
[2012-08-06 22:20] -> Running build hook: [usbinput]
[2012-08-06 22:20] -> Running build hook: [fsck]
[2012-08-06 22:20] ==> Generating module dependencies
[2012-08-06 22:20] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
[2012-08-06 22:20] ==> Image generation successful
[2012-08-06 22:20] ==> Building image from preset: 'fallback'
[2012-08-06 22:20] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
[2012-08-06 22:20] ==> Starting build: 3.4.7-1-ARCH
[2012-08-06 22:20] -> Running build hook: [base]
[2012-08-06 22:20] -> Running build hook: [udev]
[2012-08-06 22:20] -> Running build hook: [pata]
[2012-08-06 22:20] -> Running build hook: [scsi]
[2012-08-06 22:20] -> Running build hook: [sata]
[2012-08-06 22:20] -> Running build hook: [filesystems]
[2012-08-06 22:20] -> Running build hook: [usbinput]
[2012-08-06 22:20] -> Running build hook: [fsck]
[2012-08-06 22:20] ==> Generating module dependencies
[2012-08-06 22:20] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
[2012-08-06 22:20] ==> Image generation successful
[2012-08-06 22:20] upgraded linux (3.4.6-1 -> 3.4.7-1)
[2012-08-06 22:20] upgraded mysql-clients (5.5.25.a-1 -> 5.5.27-1)
[2012-08-06 22:20] upgraded mysql (5.5.25.a-1 -> 5.5.27-1)
[2012-08-06 22:20] upgraded nspr (4.9.1-1 -> 4.9.2-1)
[2012-08-06 22:20] upgraded nvidia (302.17-4 -> 304.32-1)
[2012-08-06 22:20] upgraded tzdata (2012d-1 -> 2012e-1)
[2012-08-06 22:20] upgraded xf86-input-evdev (2.7.1-1 -> 2.7.2-1)
[2012-08-06 22:23] Running 'pacman -S openjdk'
[2012-08-06 22:23] Running 'pacman -S jdk7-openjdk'
[2012-08-06 22:24] upgraded jdk7-openjdk (7.u5_2.2.1-1 -> 7.u5_2.2.1-1)
[2012-08-06 22:24] Running 'pacman -S jre7-openjdk'
[2012-08-06 22:24] upgraded jre7-openjdk (7.u5_2.2.1-1 -> 7.u5_2.2.1-1)
[2012-08-06 22:25] Running 'pacman -R pms'
[2012-08-06 22:25] warning: /opt/pms/PMS.conf saved as /opt/pms/PMS.conf.pacsave
[2012-08-06 22:25] removed pms (1.60.0-2)
[2012-08-06 22:26] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.QTF/pms-1.60.0-2-x86_64.pkg.tar.xz'
[2012-08-06 22:26] installed pms (1.60.0-2)
[2012-08-06 22:26] Running 'pacman -S vlc'
[2012-08-06 22:26] installed libdvbpsi (0.2.2-1)
[2012-08-06 22:26] installed sdl_image (1.2.12-2)
[2012-08-06 22:26] installed libdvdread (4.2.0-1)
[2012-08-06 22:26] installed libdvdnav (4.2.0-2)
[2012-08-06 22:26] installed libkate (0.4.1-3)
[2012-08-06 22:26] installed libtiger (0.3.4-3)
[2012-08-06 22:26] installed libebml (1.2.2-2)
[2012-08-06 22:26] installed libmatroska (1.3.0-2)
[2012-08-06 22:26] installed zvbi (0.2.33-4)
[2012-08-06 22:26] installed taglib (1.7.2-2)
[2012-08-06 22:26] installed libmpcdec (1.2.6-3)
[2012-08-06 22:26] installed libupnp (1.6.17-1)
[2012-08-06 22:26] installed libshout (1:2.3.0-1)
[2012-08-06 22:26] installed libmpeg2 (0.5.1-3)
[2012-08-06 22:26] installed libmodplug (0.8.8.4-1)
[2012-08-06 22:26] installed ttf-freefont (20120503-1)
[2012-08-06 22:26] installed vlc (2.0.3-2)
[2012-08-06 22:26] Running 'pacman -S lib32-gcc-libs lib32-glibc'
[2012-08-06 22:26] upgraded lib32-glibc (2.16.0-2 -> 2.16.0-2)
[2012-08-06 22:26] upgraded lib32-gcc-libs (4.7.1-5 -> 4.7.1-5)
[2012-08-07 11:44] Running 'pacman --noconfirm --asdeps -S -- pacman-color'
[2012-08-07 11:44] installed pacman-color (4.0.3-1)
[2012-08-07 11:44] Running 'pacman -U packer-color-20120807-1-any.pkg.tar.xz'
[2012-08-07 11:44] installed packer-color (20120807-1)
[2012-08-07 11:50] Running 'pacman-color -S packer'
[2012-08-07 15:50] Running 'pacman -Syyu'
[2012-08-07 15:50] synchronizing package lists
[2012-08-07 15:50] starting full system upgrade
[2012-08-07 15:50] upgraded libwbclient (3.6.6-1 -> 3.6.7-1)
[2012-08-07 15:51] upgraded smbclient (3.6.6-1 -> 3.6.7-1)
[2012-08-07 15:51] Running 'pacman -Sy'
[2012-08-07 15:51] synchronizing package lists
[2012-08-07 15:51] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.77j/rutorrent-plugins-3.4-3-any.pkg.tar.xz'
[2012-08-07 15:51] upgraded rutorrent-plugins (3.4-2 -> 3.4-3)
[2012-08-07 15:51] Running 'pacman -Sy'
[2012-08-07 15:51] synchronizing package lists
[2012-08-07 16:02] Running 'pacman-color -S crontab'
[2012-08-07 16:02] Running 'pacman-color -S cronjob'
[2012-08-07 16:02] Running 'pacman-color -S cron'
[2012-08-07 16:02] upgraded cronie (1.4.8-2 -> 1.4.8-2)
[2012-08-07 16:04] Running 'pacman-color -S cronie'
[2012-08-07 16:05] Running 'pacman-color -S esmtp procmail'
[2012-08-07 16:05] installed libesmtp (1.0.6-2)
[2012-08-07 16:05] installed esmtp (1.2-4)
[2012-08-07 16:05] installed procmail (3.22-5)
[2012-08-08 12:10] Running 'pacman -Sy'
[2012-08-08 12:10] synchronizing package lists
[2012-08-08 12:12] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.82R/pms-1.60.0-2-x86_64.pkg.tar.xz'
[2012-08-08 12:12] upgraded pms (1.60.0-2 -> 1.60.0-2)
[2012-08-08 18:02] Running 'pacman -R pms'
[2012-08-08 18:02] removed pms (1.60.0-2)
[2012-08-08 18:02] Running 'pacman -Sy'
[2012-08-08 18:02] synchronizing package lists
[2012-08-08 18:03] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.BkP/pms-1.60.0-2-x86_64.pkg.tar.xz'
[2012-08-08 18:03] installed pms (1.60.0-2)
[2012-08-08 18:17] Running 'pacman -S extra/icedtea-web'
[2012-08-08 18:17] Running 'pacman -S extra/icedtea-web-java7'
[2012-08-08 18:18] installed icedtea-web-java7 (1.2.1-2)
[2012-08-08 18:36] Running 'pacman -R pms'
[2012-08-08 1shadowlurker wrote:
It's problem in pam configuration files. You need to create files useradd, userdel, groupadd and groupdel in /etc/pam.d/ directory with following content:
auth sufficient pam_rootok.so
auth required pam_unix.so
account required pam_unix.so
session required pam_unix.so
password required pam_permit.so
You da man! I also had to add grpconv and chage to get filesystem working but all seems well now thanks!
Doug piston had me try something that I think will help anyone else who has this problem. Try re-installing pambase and shadow. It generated back most of any I was missing.
Last edited by shauder (2012-11-03 00:55:19) -
Arch64 ati radeon 3870 radeonhd driver. Problem with xorg.conf.
I've got a small problem with my xorg. I won't hide that i'm not a xorg nerd and i've used the automatic xorg tool to generate the xorg.conf. After starting X, the screen goes black and then after ~5 seconds montior switches to power-saving mode.
So here we go.
That's xorg.conf
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "glx"
Load "extmod"
Load "record"
Load "dri2"
Load "dbe"
Load "dri"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "AccelMethod" # [<str>]
#Option "offscreensize" # [<str>]
#Option "SWcursor" # [<bool>]
#Option "ignoreconnector" # [<str>]
#Option "forcereduced" # [<bool>]
#Option "forcedpi" # <i>
#Option "useconfiguredmonitor" # [<bool>]
#Option "HPD" # <str>
#Option "NoRandr" # [<bool>]
#Option "RROutputOrder" # [<str>]
#Option "DRI" # [<bool>]
#Option "TVMode" # [<str>]
#Option "ScaleType" # [<str>]
#Option "UseAtomBIOS" # [<bool>]
#Option "AtomBIOS" # [<str>]
#Option "UnverifiedFeatures" # [<bool>]
#Option "Audio" # [<bool>]
#Option "HDMI" # [<str>]
#Option "COHERENT" # [<str>]
Identifier "Card0"
Driver "radeonhd"
VendorName "ATI Technologies Inc"
BoardName "Radeon HD 3870"
BusID "PCI:1:0:0"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "AccelMethod" # [<str>]
#Option "offscreensize" # [<str>]
#Option "SWcursor" # [<bool>]
#Option "ignoreconnector" # [<str>]
#Option "forcereduced" # [<bool>]
#Option "forcedpi" # <i>
#Option "useconfiguredmonitor" # [<bool>]
#Option "HPD" # <str>
#Option "NoRandr" # [<bool>]
#Option "RROutputOrder" # [<str>]
#Option "DRI" # [<bool>]
#Option "TVMode" # [<str>]
#Option "ScaleType" # [<str>]
#Option "UseAtomBIOS" # [<bool>]
#Option "AtomBIOS" # [<str>]
#Option "UnverifiedFeatures" # [<bool>]
#Option "Audio" # [<bool>]
#Option "HDMI" # [<str>]
#Option "COHERENT" # [<str>]
Identifier "Card1"
Driver "radeonhd"
VendorName "ATI Technologies Inc"
BoardName "Radeon HD 3870"
BusID "PCI:2:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Card1"
Monitor "Monitor1"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
and that's the log
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.6.3.901 (1.6.4 RC 1)
Release Date: 2009-8-25
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30-ARCH x86_64
Current Operating System: Linux kasia 2.6.31-ARCH #1 SMP PREEMPT Tue Oct 13 11:33:39 CEST 2009 x86_64
Build Date: 04 September 2009 05:45:43PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Oct 21 20:31:45 2009
(++) Using config file: "xorg.conf.new"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Screen "Screen1" (1)
(**) | |-->Monitor "Monitor1"
(**) | |-->Device "Card1"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/TTF" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/Type1" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/TTF" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/Type1" does not exist.
Entry deleted from font path.
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
built-ins
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Loader magic: 0x1d40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 7
(!!) More than one possible primary device found
(--) PCI: (0:1:0:0) 1002:9501:1458:21a4 ATI Technologies Inc Radeon HD 3870 rev 0, Mem @ 0xd0000000/268435456, 0xf7000000/65536, I/O @ 0x0000a000/256, BIOS @ 0x????????/131072
(--) PCI: (0:2:0:0) 1002:9501:1458:21a4 ATI Technologies Inc Radeon HD 3870 rev 0, Mem @ 0xe0000000/268435456, 0xf5000000/65536, I/O @ 0x0000b000/256, BIOS @ 0x????????/131072
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "radeonhd"
(II) Loading /usr/lib/xorg/modules/drivers//radeonhd_drv.so
(II) Module radeonhd: vendor="AMD GPG"
compiled for 1.6.0, module version = 1.2.5
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) RADEONHD: X driver for the following AMD GPG (ATI) graphics devices:
RV505 : Radeon X1550, X1550 64bit.
RV515 : Radeon X1300, X1550, X1600; FireGL V3300, V3350.
RV516 : Radeon X1300, X1550, X1550 64-bit, X1600; FireMV 2250.
R520 : Radeon X1800; FireGL V5300, V7200, V7300, V7350.
RV530 : Radeon X1300 XT, X1600, X1600 Pro, X1650; FireGL V3400, V5200.
RV535 : Radeon X1300, X1650.
RV550 : Radeon X2300 HD.
RV560 : Radeon X1650.
RV570 : Radeon X1950, X1950 GT; FireGL V7400.
R580 : Radeon X1900, X1950; AMD Stream Processor.
R600 : Radeon HD 2900 GT/Pro/XT; FireGL V7600/V8600/V8650.
RV610 : Radeon HD 2350, HD 2400 Pro/XT, HD 2400 Pro AGP; FireGL V4000.
RV620 : Radeon HD 3450, HD 3470.
RV630 : Radeon HD 2600 LE/Pro/XT, HD 2600 Pro/XT AGP; Gemini RV630;
FireGL V3600/V5600.
RV635 : Radeon HD 3650, HD 3670.
RV670 : Radeon HD 3690, 3850, HD 3870, FireGL V7700, FireStream 9170.
R680 : Radeon HD 3870 X2.
M52 : Mobility Radeon X1300.
M54 : Mobility Radeon X1400; M54-GL.
M56 : Mobility Radeon X1600; Mobility FireGL V5200.
M58 : Mobility Radeon X1800, X1800 XT; Mobility FireGL V7100, V7200.
M62 : Mobility Radeon X1350.
M64 : Mobility Radeon X1450, X2300.
M66 : Mobility Radeon X1700, X1700 XT; FireGL V5250.
M68 : Mobility Radeon X1900.
M71 : Mobility Radeon HD 2300.
M72 : Mobility Radeon HD 2400; Radeon E2400.
M74 : Mobility Radeon HD 2400 XT.
M76 : Mobility Radeon HD 2600;
(Gemini ATI) Mobility Radeon HD 2600 XT.
M82 : Mobility Radeon HD 3400.
M86 : Mobility Radeon HD 3650, HD 3670, Mobility FireGL V5700.
M88 : Mobility Radeon HD 3850, HD 3850 X2, HD 3870, HD3870 X2.
RS600 : Radeon Xpress 1200, Xpress 1250.
RS690 : Radeon X1200, X1250, X1270.
RS740 : RS740, RS740M.
RS780 : Radeon HD 3100/3200/3300 Series.
RV770 : Radeon HD 4800 Series; Everest, K2, Denali ATI FirePro.
R700 : Radeon R700.
M98 : Radeon M98 Mobility.
RV730 : Radeon HD4670, HD4650.
M96 : Radeon M96 Mobility.
RV710 : Radeon HD4570, HD4350.
(II) RADEONHD: version 1.2.5, built from dist of git branch master, commit cb54f48b
(II) Primary Device is:
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] 1 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[8] 1 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[9] 1 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[10] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[11] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[12] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[13] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
[14] 1 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[15] 1 0 0x000003c0 - 0x000003df (0x20) IS[b]
(==) RADEONHD(0): Depth 24, (--) framebuffer bpp 32
(**) RADEONHD(0): Selected ShadowFB.
(II) RADEONHD(0): Unknown card detected: 0x9501:0x1458:0x21A4.
If - and only if - your card does not work or does not work optimally
please contact [email protected] to help rectify this.
Use the subject: 0x9501:0x1458:0x21A4: <name of board>
and *please* describe the problems you are seeing
in your message.
(--) RADEONHD(0): Detected an RV670 on an unidentified card
(II) RADEONHD(0): Mapped IO @ 0xf7000000 to 0x7f39ca36f000 (size 0x00010000)
(II) RADEONHD(0): PCIE Card Detected
(II) RADEONHD(0): Getting BIOS copy from PCI ROM
(II) RADEONHD(0): ATOM BIOS Rom:
SubsystemVendorID: 0x1458 SubsystemID: 0x21a4
IOBaseAddress: 0xa000
Filename: Test.bin
BIOS Bootup Message:
GV-RX387512HP_F10
(II) RADEONHD(0): Default Engine Clock: 825000
(II) RADEONHD(0): Default Memory Clock: 900000
(II) RADEONHD(0): Calling ASIC Init
(II) RADEONHD(0): ASIC_INIT Successful
(II) RADEONHD(0): Analog TV Default Mode: 1
(II) RADEONHD(0): Found default TV Mode NTSC
(II) RADEONHD(0): The detected amount of videoram exceeds the PCI BAR aperture.
(II) RADEONHD(0): Using only 262144kB of the total 524288kB.
(--) RADEONHD(0): VideoRAM: 262144 kByte
(II) RADEONHD(0): Framebuffer space used by Firmware (kb): 16
(II) RADEONHD(0): Start of VRAM area used by Firmware: 0x1fffc000
(II) RADEONHD(0): AtomBIOS requests 16kB of VRAM scratch space
(II) RADEONHD(0): AtomBIOS VRAM scratch base: 0x1fffc000
(WW) RADEONHD(0): rhdAtomAllocateFbScratch: FW FB scratch area 536854528 (size: 16384) extends beyond available framebuffer size 268435456
(II) RADEONHD(0): Cannot get VRAM scratch space. Allocating in main memory instead
(II) RADEONHD(0): Default Engine Clock: 825000
(II) RADEONHD(0): Default Memory Clock: 900000
(II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Output: 1200000
(II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Output: 0
(II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Input: 13500
(II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Input: 1000
(II) RADEONHD(0): Maximum Pixel Clock: 400000
(II) RADEONHD(0): Reference Clock: 27000
(II) RADEONHD(0): Direct rendering not officially supported on R600 and up
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) RADEONHD(0): Reference Clock: 27000
(II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f90
(II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f90
(II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(0): I2C bus "RHD I2C line 0" initialized.
(II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f94
(II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f94
(II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(0): I2C bus "RHD I2C line 1" initialized.
(II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f98
(II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f98
(II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(0): I2C bus "RHD I2C line 2" initialized.
(II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f80
(II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f80
(II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(0): I2C bus "RHD I2C line 3" initialized.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) RADEONHD(0): Detected VGA mode.
(II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Output: 0
(II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Output: 1200000
(II) RADEONHD(0): Maximum Pixel Clock: 400000
(II) RADEONHD(0): Reference Clock: 27000
(II) RADEONHD(0): FB: Allocated Cursor Image at offset 0x00000000 (size = 0x00004000)
(II) RADEONHD(0): FB: Allocated Cursor Image at offset 0x00004000 (size = 0x00004000)
(II) RADEONHD(0): Connector[0] {RHD_CONNECTOR_DVI, "DUAL_LINK_DVI_I DFP1 CRT2", RHD_DDC_1, RHD_HPD_0, { RHD_OUTPUT_TMDSA, RHD_OUTPUT_DACB } }
(II) RADEONHD(0): Connector[1] {RHD_CONNECTOR_TV, "7PIN_DIN TV1 CV", RHD_DDC_0, RHD_HPD_NONE, { RHD_OUTPUT_DACB, RHD_OUTPUT_NONE } }
(II) RADEONHD(0): Connector[2] {RHD_CONNECTOR_DVI, "DUAL_LINK_DVI_I CRT1 DFP2", RHD_DDC_0, RHD_HPD_1, { RHD_OUTPUT_LVTMA, RHD_OUTPUT_DACA } }
(--) RADEONHD(0): Attaching Output TMDS A to Connector DVI-I 1
(--) RADEONHD(0): Attaching Output DAC B to Connector DVI-I 1
(--) RADEONHD(0): Attaching Output DAC B to Connector TV 7PIN_DIN
(--) RADEONHD(0): Attaching Output TMDS B to Connector DVI-I 2
(--) RADEONHD(0): Attaching Output DAC A to Connector DVI-I 2
(II) RADEONHD(0): RandR: Adding RRoutput DVI-I_1/digital for Output TMDS A
(II) RADEONHD(0): RandR: Adding RRoutput DVI-I_1/analog for Output DAC B
(II) RADEONHD(0): RandR: Adding RRoutput TV_7PIN_DIN for Output DAC B
(II) RADEONHD(0): RandR: Adding RRoutput DVI-I_2/digital for Output TMDS B
(II) RADEONHD(0): RandR: Adding RRoutput DVI-I_2/analog for Output DAC A
(II) RADEONHD(0): Output DVI-I_1/digital using monitor section Monitor0
(II) RADEONHD(0): Output DVI-I_1/digital has no monitor section
(II) RADEONHD(0): Output DVI-I_1/analog has no monitor section
(II) RADEONHD(0): Output TV_7PIN_DIN has no monitor section
(II) RADEONHD(0): Output DVI-I_2/digital has no monitor section
(II) RADEONHD(0): Output DVI-I_2/analog has no monitor section
(II) RADEONHD(0): TMDS A: Sensed Output: DVI
(II) RADEONHD(0): Setting TMDS A to incoherent
(II) RADEONHD(0): I2C device "RHD I2C line 1:E-EDID segment register" registered at address 0x60.
(II) RADEONHD(0): I2C device "RHD I2C line 1:ddc2" registered at address 0xA0.
(II) RADEONHD(0): EDID data for W2253
(II) RADEONHD(0): Manufacturer: GSM Model: 56dc Serial#: 385315
(II) RADEONHD(0): Year: 2009 Week: 5
(II) RADEONHD(0): EDID Version: 1.3
(II) RADEONHD(0): Digital Display Input
(II) RADEONHD(0): Max Image Size [cm]: horiz.: 49 vert.: 32
(II) RADEONHD(0): Gamma: 2.20
(II) RADEONHD(0): DPMS capabilities: StandBy Suspend Off
(II) RADEONHD(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEONHD(0): First detailed timing is preferred mode
(II) RADEONHD(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
(II) RADEONHD(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329
(II) RADEONHD(0): Supported established timings:
(II) RADEONHD(0): 720x400@70Hz
(II) RADEONHD(0): 640x480@60Hz
(II) RADEONHD(0): 640x480@75Hz
(II) RADEONHD(0): 800x600@56Hz
(II) RADEONHD(0): 800x600@60Hz
(II) RADEONHD(0): 800x600@75Hz
(II) RADEONHD(0): 832x624@75Hz
(II) RADEONHD(0): 1024x768@60Hz
(II) RADEONHD(0): 1024x768@75Hz
(II) RADEONHD(0): 1280x1024@75Hz
(II) RADEONHD(0): 1152x870@75Hz
(II) RADEONHD(0): Manufacturer's mask: 0
(II) RADEONHD(0): Supported standard timings:
(II) RADEONHD(0): #0: hsize: 1680 vsize 1050 refresh: 60 vid: 179
(II) RADEONHD(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) RADEONHD(0): #2: hsize: 1280 vsize 1024 refresh: 75 vid: 36737
(II) RADEONHD(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) RADEONHD(0): Supported detailed timing:
(II) RADEONHD(0): clock: 138.5 MHz Image Size: 510 x 290 mm
(II) RADEONHD(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
(II) RADEONHD(0): v_active: 1080 v_sync: 1083 v_sync_end 1088 v_blanking: 1111 v_border: 0
(II) RADEONHD(0): Supported detailed timing:
(II) RADEONHD(0): clock: 148.5 MHz Image Size: 510 x 290 mm
(II) RADEONHD(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
(II) RADEONHD(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
(II) RADEONHD(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 150 MHz
(II) RADEONHD(0): Monitor name: W2253
(II) RADEONHD(0): EDID (in hex):
(II) RADEONHD(0): 00ffffffffffff001e6ddc5623e10500
(II) RADEONHD(0): 0513010380312078eaee91a3544c9926
(II) RADEONHD(0): 0f5054a76b80b3008180818f714f0101
(II) RADEONHD(0): 0101010101011a3680a070381f403020
(II) RADEONHD(0): 3500fe221100001e023a801871382d40
(II) RADEONHD(0): 582c4500fe221100001c000000fd0038
(II) RADEONHD(0): 4b1e530f000a202020202020000000fc
(II) RADEONHD(0): 0057323235330a202020202020200081
(II) RADEONHD(0): EDID vendor "GSM", prod id 22236
(II) RADEONHD(0): Using EDID range info for horizontal sync
(II) RADEONHD(0): Using EDID range info for vertical refresh
(II) RADEONHD(0): Printing DDC gathered Modelines:
(II) RADEONHD(0): Modeline "1920x1080"x0.0 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync +vsync (66.6 kHz)
(II) RADEONHD(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 -hsync +vsync (67.5 kHz)
(II) RADEONHD(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEONHD(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEONHD(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEONHD(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEONHD(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEONHD(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) RADEONHD(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEONHD(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEONHD(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEONHD(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEONHD(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) RADEONHD(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
(II) RADEONHD(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEONHD(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) RADEONHD(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) RADEONHD(0): Output DVI-I_1/digital connected
(II) RADEONHD(0): Output DVI-I_1/analog disconnected
(II) RADEONHD(0): Output TV_7PIN_DIN disconnected
(II) RADEONHD(0): Output DVI-I_2/digital disconnected
(II) RADEONHD(0): Output DVI-I_2/analog disconnected
(II) RADEONHD(0): Using exact sizes for initial modes
(II) RADEONHD(0): Output DVI-I_1/digital using initial mode 1920x1080
(II) RADEONHD(0): RandR 1.2 support enabled
(==) RADEONHD(0): RGB weight 888
(==) RADEONHD(0): Default visual is TrueColor
(==) RADEONHD(0): Using gamma correction (1.0, 1.0, 1.0)
(II) RADEONHD(0): Using 1920x1920 Framebuffer with 1920 pitch
(II) RADEONHD(0): FB: Allocated ScanoutBuffer at offset 0x00008000 (size = 0x00E10000)
(**) RADEONHD(0): Display dimensions: (490, 320) mm
(**) RADEONHD(0): DPI set to (99, 152)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) Loading sub module "shadow"
(II) LoadModule: "shadow"
(II) Loading /usr/lib/xorg/modules//libshadow.so
(II) Module shadow: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.1.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) RADEONHD(0): Using ShadowFB
(==) RADEONHD(1): Depth 24, (--) framebuffer bpp 32
(**) RADEONHD(1): Selected ShadowFB.
(II) RADEONHD(1): Unknown card detected: 0x9501:0x1458:0x21A4.
If - and only if - your card does not work or does not work optimally
please contact [email protected] to help rectify this.
Use the subject: 0x9501:0x1458:0x21A4: <name of board>
and *please* describe the problems you are seeing
in your message.
(--) RADEONHD(1): Detected an RV670 on an unidentified card
(II) RADEONHD(1): Mapped IO @ 0xf5000000 to 0x7f39ca36f000 (size 0x00010000)
(II) RADEONHD(1): PCIE Card Detected
(II) RADEONHD(1): Getting BIOS copy from PCI ROM
(II) RADEONHD(1): ATOM BIOS Rom:
SubsystemVendorID: 0x1458 SubsystemID: 0x21a4
IOBaseAddress: 0x0000
Filename: Test.bin
BIOS Bootup Message:
GV-RX387512HP_F10
(II) RADEONHD(1): Default Engine Clock: 825000
(II) RADEONHD(1): Default Memory Clock: 900000
(II) RADEONHD(1): Calling ASIC Init
(II) RADEONHD(1): ASIC_INIT Successful
(II) RADEONHD(1): Analog TV Default Mode: 27049664
(II) RADEONHD(1): The detected amount of videoram exceeds the PCI BAR aperture.
(II) RADEONHD(1): Using only 262144kB of the total 524288kB.
(--) RADEONHD(1): VideoRAM: 262144 kByte
(II) RADEONHD(1): Framebuffer space used by Firmware (kb): 0
(WW) RADEONHD(1): rhdAtomGetFbBaseAndSize: AtomBIOS specified VRAM scratch space size invalid
(II) RADEONHD(1): default to: 20480
(II) RADEONHD(1): Cannot get VRAM scratch space. Allocating in main memory instead
(II) RADEONHD(1): Default Engine Clock: 825000
(II) RADEONHD(1): Default Memory Clock: 900000
(II) RADEONHD(1): Maximum Pixel ClockPLL Frequency Output: 1200000
(II) RADEONHD(1): Minimum Pixel ClockPLL Frequency Output: 0
(II) RADEONHD(1): Maximum Pixel ClockPLL Frequency Input: 13500
(II) RADEONHD(1): Minimum Pixel ClockPLL Frequency Input: 1000
(II) RADEONHD(1): Maximum Pixel Clock: 400000
(II) RADEONHD(1): Reference Clock: 27000
(II) RADEONHD(1): Direct rendering not officially supported on R600 and up
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) RADEONHD(1): Reference Clock: 27000
(II) RADEONHD(1): GPIO_I2C_Clk_Mask: 0x1f90
(II) RADEONHD(1): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(1): GPIO_I2C_Data_Mask: 0x1f90
(II) RADEONHD(1): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(1): I2C bus "RHD I2C line 0" initialized.
(II) RADEONHD(1): GPIO_I2C_Clk_Mask: 0x1f94
(II) RADEONHD(1): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(1): GPIO_I2C_Data_Mask: 0x1f94
(II) RADEONHD(1): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(1): I2C bus "RHD I2C line 1" initialized.
(II) RADEONHD(1): GPIO_I2C_Clk_Mask: 0x1f98
(II) RADEONHD(1): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(1): GPIO_I2C_Data_Mask: 0x1f98
(II) RADEONHD(1): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(1): I2C bus "RHD I2C line 2" initialized.
(II) RADEONHD(1): GPIO_I2C_Clk_Mask: 0x1f80
(II) RADEONHD(1): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(1): GPIO_I2C_Data_Mask: 0x1f80
(II) RADEONHD(1): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(1): I2C bus "RHD I2C line 3" initialized.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) RADEONHD(1): Detected VGA mode.
(II) RADEONHD(1): Minimum Pixel ClockPLL Frequency Output: 0
(II) RADEONHD(1): Maximum Pixel ClockPLL Frequency Output: 1200000
(II) RADEONHD(1): Maximum Pixel Clock: 400000
(II) RADEONHD(1): Reference Clock: 27000
(II) RADEONHD(1): FB: Allocated Cursor Image at offset 0x00000000 (size = 0x00004000)
(II) RADEONHD(1): FB: Allocated Cursor Image at offset 0x00004000 (size = 0x00004000)
(II) RADEONHD(1): Connector[0] {RHD_CONNECTOR_DVI, "DUAL_LINK_DVI_I DFP1 CRT2", RHD_DDC_1, RHD_HPD_0, { RHD_OUTPUT_TMDSA, RHD_OUTPUT_DACB } }
(II) RADEONHD(1): Connector[1] {RHD_CONNECTOR_TV, "7PIN_DIN TV1 CV", RHD_DDC_0, RHD_HPD_NONE, { RHD_OUTPUT_DACB, RHD_OUTPUT_NONE } }
(II) RADEONHD(1): Connector[2] {RHD_CONNECTOR_DVI, "DUAL_LINK_DVI_I CRT1 DFP2", RHD_DDC_0, RHD_HPD_1, { RHD_OUTPUT_LVTMA, RHD_OUTPUT_DACA } }
(--) RADEONHD(1): Attaching Output TMDS A to Connector DVI-I 1
(--) RADEONHD(1): Attaching Output DAC B to Connector DVI-I 1
(--) RADEONHD(1): Attaching Output DAC B to Connector TV 7PIN_DIN
(--) RADEONHD(1): Attaching Output TMDS B to Connector DVI-I 2
(--) RADEONHD(1): Attaching Output DAC A to Connector DVI-I 2
(II) RADEONHD(1): RandR: Adding RRoutput DVI-I_1/digital for Output TMDS A
(II) RADEONHD(1): RandR: Adding RRoutput DVI-I_1/analog for Output DAC B
(II) RADEONHD(1): RandR: Adding RRoutput TV_7PIN_DIN for Output DAC B
(II) RADEONHD(1): RandR: Adding RRoutput DVI-I_2/digital for Output TMDS B
(II) RADEONHD(1): RandR: Adding RRoutput DVI-I_2/analog for Output DAC A
(II) RADEONHD(1): Output DVI-I_1/digital using monitor section Monitor1
(II) RADEONHD(1): Output DVI-I_1/digital has no monitor section
(II) RADEONHD(1): Output DVI-I_1/analog has no monitor section
(II) RADEONHD(1): Output TV_7PIN_DIN has no monitor section
(II) RADEONHD(1): Output DVI-I_2/digital has no monitor section
(II) RADEONHD(1): Output DVI-I_2/analog has no monitor section
(II) RADEONHD(1): Output DVI-I_1/digital disconnected
(II) RADEONHD(1): Output DVI-I_1/analog disconnected
(II) RADEONHD(1): Output TV_7PIN_DIN disconnected
(II) RADEONHD(1): Output DVI-I_2/digital disconnected
(II) RADEONHD(1): Output DVI-I_2/analog disconnected
(WW) RADEONHD(1): No outputs definitely connected, trying again...
(II) RADEONHD(1): Output DVI-I_1/digital disconnected
(II) RADEONHD(1): Output DVI-I_1/analog disconnected
(II) RADEONHD(1): Output TV_7PIN_DIN disconnected
(II) RADEONHD(1): Output DVI-I_2/digital disconnected
(II) RADEONHD(1): Output DVI-I_2/analog disconnected
(WW) RADEONHD(1): Unable to find initial modes
(EE) RADEONHD(1): RandR: No valid modes. Disabling RandR support.
(EE) RADEONHD(1): Failed to detect a connected monitor
(II) RADEONHD(1): Destroying TMDS A
(II) RADEONHD(1): Destroying DAC B
(II) RADEONHD(1): Destroying TMDS B
(II) RADEONHD(1): Destroying DAC A
(II) RADEONHD(1): I2C bus "RHD I2C line 0" removed.
(II) RADEONHD(1): I2C bus "RHD I2C line 1" removed.
(II) RADEONHD(1): I2C bus "RHD I2C line 2" removed.
(II) RADEONHD(1): I2C bus "RHD I2C line 3" removed.
(II) UnloadModule: "radeonhd"
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) RADEONHD(0): Mapped IO @ 0xf7000000 to 0x7f39ca36f000 (size 0x00010000)
(II) RADEONHD(0): Mapped FB @ 0xd0000000 to 0x7f39b66f6000 (size 0x10000000)
(WW) RADEONHD(0): RHDCSInit: No CS for R600 and up yet.
(==) RADEONHD(0): Backing store disabled
(==) RADEONHD(0): Silken mouse enabled
(II) RADEONHD(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) RADEONHD(0): On Crtc 0 Setting 59.9 Hz Mode: Modeline "1920x1080" 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync +vsync
None
(II) RADEONHD(0): RHDAudioSetClock: using TMDS A as clock source with 138500 khz
(II) RADEONHD(0): Using ACR timing N=4096 CTS=138500 for frequency 32000
(II) RADEONHD(0): Using ACR timing N=6272 CTS=153888 for frequency 44100
(II) RADEONHD(0): Using ACR timing N=6144 CTS=138500 for frequency 48000
(II) RADEONHD(0): RHDAudioSetSupported: config 0x60040 codec 0x1
(II) RADEONHD(0): DPMS enabled
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) RADEONHD(0): Setting screen physical size to 510 x 290
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 2.2.5
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device ImPS/2 Logitech Wheel Mouse
(**) ImPS/2 Logitech Wheel Mouse: always reports core events
(**) ImPS/2 Logitech Wheel Mouse: Device: "/dev/input/event5"
(II) ImPS/2 Logitech Wheel Mouse: Found 3 mouse buttons
(II) ImPS/2 Logitech Wheel Mouse: Found x and y relative axes
(II) ImPS/2 Logitech Wheel Mouse: Found scroll wheel(s)
(II) ImPS/2 Logitech Wheel Mouse: Configuring as mouse
(**) ImPS/2 Logitech Wheel Mouse: YAxisMapping: buttons 4 and 5
(**) ImPS/2 Logitech Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "ImPS/2 Logitech Wheel Mouse" (type: MOUSE)
(**) ImPS/2 Logitech Wheel Mouse: (accel) keeping acceleration scheme 1
(**) ImPS/2 Logitech Wheel Mouse: (accel) filter chain progression: 2.00
(**) ImPS/2 Logitech Wheel Mouse: (accel) filter stage 0: 20.00 ms
(**) ImPS/2 Logitech Wheel Mouse: (accel) set acceleration profile 0
(II) ImPS/2 Logitech Wheel Mouse: initialized for relative axes.
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event4"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) RADEONHD(0): RHDHdmiUpdateAudioSettings: stoped with 1 channels, 48000 Hz sampling rate, 8 bits per sample,
(II) RADEONHD(0): RHDHdmiUpdateAudioSettings: 0x00 IEC60958 status bits and 0x00 category code
(II) RADEONHD(0): RHDHdmiUpdateAudioSettings: stoped with 1 channels, 48000 Hz sampling rate, 8 bits per sample,
(II) RADEONHD(0): RHDHdmiUpdateAudioSettings: 0x00 IEC60958 status bits and 0x00 category code
(II) Macintosh mouse button emulation: Close
(II) UnloadModule: "evdev"
(II) ImPS/2 Logitech Wheel Mouse: Close
(II) UnloadModule: "evdev"
(II) AT Translated Set 2 keyboard: Close
(II) UnloadModule: "evdev"
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) Power Button: Close
(II) UnloadModule: "evdev"
Last edited by warnab (2009-10-21 18:53:12)i'm getting then such log
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.6.3.901 (1.6.4 RC 1)
Release Date: 2009-8-25
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30-ARCH x86_64
Current Operating System: Linux kasia 2.6.31-ARCH #1 SMP PREEMPT Tue Oct 13 11:33:39 CEST 2009 x86_64
Build Date: 04 September 2009 05:45:43PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Oct 21 22:35:22 2009
(II) Loader magic: 0x1d40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 7
(!!) More than one possible primary device found
(--) PCI: (0:1:0:0) 1002:9501:1458:21a4 ATI Technologies Inc Radeon HD 3870 rev 0, Mem @ 0xd0000000/268435456, 0xf7000000/65536, I/O @ 0x0000a000/256, BIOS @ 0x????????/131072
(--) PCI: (0:2:0:0) 1002:9501:1458:21a4 ATI Technologies Inc Radeon HD 3870 rev 0, Mem @ 0xe0000000/268435456, 0xf5000000/65536, I/O @ 0x0000b000/256, BIOS @ 0x????????/131072
Primary device is not PCI
(==) Using default built-in configuration (21 lines)
(==) --- Start of built-in configuration ---
Section "Device"
Identifier "Builtin Default vesa Device 0"
Driver "vesa"
EndSection
Section "Screen"
Identifier "Builtin Default vesa Screen 0"
Device "Builtin Default vesa Device 0"
EndSection
Section "Device"
Identifier "Builtin Default fbdev Device 0"
Driver "fbdev"
EndSection
Section "Screen"
Identifier "Builtin Default fbdev Screen 0"
Device "Builtin Default fbdev Device 0"
EndSection
Section "ServerLayout"
Identifier "Builtin Default Layout"
Screen "Builtin Default vesa Screen 0"
Screen "Builtin Default fbdev Screen 0"
EndSection
(==) --- End of built-in configuration ---
(==) ServerLayout "Builtin Default Layout"
(**) |-->Screen "Builtin Default vesa Screen 0" (0)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default vesa Device 0"
(==) No monitor specified for screen "Builtin Default vesa Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default fbdev Screen 0" (1)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default fbdev Device 0"
(==) No monitor specified for screen "Builtin Default fbdev Screen 0".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/TTF" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/Type1" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "vesa"
(WW) Warning, couldn't open module vesa
(II) UnloadModule: "vesa"
(EE) Failed to load module "vesa" (module does not exist, 0)
(II) LoadModule: "fbdev"
(WW) Warning, couldn't open module fbdev
(II) UnloadModule: "fbdev"
(EE) Failed to load module "fbdev" (module does not exist, 0)
(EE) No drivers available.
Fatal server error:
no screens found
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information. -
i have a problem with the opensource hdradeon driver.
Here is the output of
lspci | grep VGA
01:00.0 VGA compatible controller: ATI Technologies Inc RV710 [Radeon HD 4350]
Here's my /etc/X11/xorg.conf.d/10-monitor.conf file:
Section "Monitor"
Identifier "Monitor0"
EndSection
Section "Device"
Identifier "Device0"
Driver "hdradeon"
EndSection
Section "Screen"
Identifier "Screen0" #Collapse Monitor and Device section to Screen section
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 16
Modes "1280x1024_75.00"
EndSubSection
EndSection
Here is a part of the Xorg.0.log file
[ 54.169]
X.Org X Server 1.9.0
Release Date: 2010-08-20
[ 54.169] X Protocol Version 11, Revision 0
[ 54.169] Build Operating System: Linux 2.6.34-ARCH x86_64
[ 54.169] Current Operating System: Linux myhost 2.6.35-ARCH #1 SMP PREEMPT Fri Aug 27 17:14:28 CEST 2010 x86_64
[ 54.170] Kernel command line: root=/dev/disk/by-uuid/690cd2a9-efb4-466c-a51f-dbba2903989b ro
[ 54.170] Build Date: 24 August 2010 01:44:37PM
[ 54.170]
[ 54.170] Current version of pixman: 0.18.4
[ 54.170] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 54.170] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 54.170] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jan 5 02:17:07 2004
[ 54.170] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 54.171] (==) No Layout section. Using the first Screen section.
[ 54.171] (**) |-->Screen "Screen0" (0)
[ 54.171] (**) | |-->Monitor "Monitor0"
[ 54.171] (**) | |-->Device "Device0"
[ 54.171] (==) Automatically adding devices
[ 54.171] (==) Automatically enabling devices
[ 54.171] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 54.171] Entry deleted from font path.
[ 54.171] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 54.171] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 54.171] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 54.171] (II) Loader magic: 0x7d4880
[ 54.171] (II) Module ABI versions:
[ 54.171] X.Org ANSI C Emulation: 0.4
[ 54.171] X.Org Video Driver: 8.0
[ 54.171] X.Org XInput driver : 11.0
[ 54.171] X.Org Server Extension : 4.0
[ 54.172] (--) PCI:*(0:1:0:0) 1002:954f:174b:1341 rev 0, Mem @ 0x20000000/268435456, 0x30200000/65536, I/O @ 0x00002000/256, BIOS @ 0x????????/131072
[ 54.173] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 54.173] (II) LoadModule: "extmod"
[ 54.173] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 54.173] (II) Module extmod: vendor="X.Org Foundation"
[ 54.173] compiled for 1.9.0, module version = 1.0.0
[ 54.173] Module class: X.Org Server Extension
[ 54.173] ABI class: X.Org Server Extension, version 4.0
[ 54.173] (II) Loading extension MIT-SCREEN-SAVER
[ 54.173] (II) Loading extension XFree86-VidModeExtension
[ 54.173] (II) Loading extension XFree86-DGA
[ 54.173] (II) Loading extension DPMS
[ 54.173] (II) Loading extension XVideo
[ 54.173] (II) Loading extension XVideo-MotionCompensation
[ 54.173] (II) Loading extension X-Resource
[ 54.173] (II) LoadModule: "dbe"
[ 54.174] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 54.174] (II) Module dbe: vendor="X.Org Foundation"
[ 54.174] compiled for 1.9.0, module version = 1.0.0
[ 54.174] Module class: X.Org Server Extension
[ 54.174] ABI class: X.Org Server Extension, version 4.0
[ 54.174] (II) Loading extension DOUBLE-BUFFER
[ 54.174] (II) LoadModule: "glx"
[ 54.174] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 54.174] (II) Module glx: vendor="X.Org Foundation"
[ 54.174] compiled for 1.9.0, module version = 1.0.0
[ 54.174] ABI class: X.Org Server Extension, version 4.0
[ 54.174] (==) AIGLX enabled
[ 54.174] (II) Loading extension GLX
[ 54.174] (II) LoadModule: "record"
[ 54.174] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 54.174] (II) Module record: vendor="X.Org Foundation"
[ 54.174] compiled for 1.9.0, module version = 1.13.0
[ 54.174] Module class: X.Org Server Extension
[ 54.174] ABI class: X.Org Server Extension, version 4.0
[ 54.174] (II) Loading extension RECORD
[ 54.174] (II) LoadModule: "dri"
[ 54.175] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 54.175] (II) Module dri: vendor="X.Org Foundation"
[ 54.175] compiled for 1.9.0, module version = 1.0.0
[ 54.175] ABI class: X.Org Server Extension, version 4.0
[ 54.175] (II) Loading extension XFree86-DRI
[ 54.175] (II) LoadModule: "dri2"
[ 54.175] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 54.175] (II) Module dri2: vendor="X.Org Foundation"
[ 54.175] compiled for 1.9.0, module version = 1.2.0
[ 54.175] ABI class: X.Org Server Extension, version 4.0
[ 54.175] (II) Loading extension DRI2
[ 54.175] (II) LoadModule: "radeonhd"
[ 54.175] (II) Loading /usr/lib/xorg/modules/drivers/radeonhd_drv.so
[ 54.176] (II) Module radeonhd: vendor="AMD GPG"
[ 54.176] compiled for 1.9.0, module version = 1.3.0
[ 54.176] Module class: X.Org Video Driver
[ 54.176] ABI class: X.Org Video Driver, version 8.0
[ 54.176] (II) RADEONHD: X driver for the following AMD GPG (ATI) graphics devices:
[ 54.176] RV505 : Radeon X1550, X1550 64bit.
RV515 : Radeon X1300, X1550, X1600; FireGL V3300, V3350.
RV516 : Radeon X1300, X1550, X1550 64-bit, X1600; FireMV 2250.
R520 : Radeon X1800; FireGL V5300, V7200, V7300, V7350.
RV530 : Radeon X1300 XT, X1600, X1600 Pro, X1650; FireGL V3400, V5200.
RV535 : Radeon X1300, X1650.
RV550 : Radeon X2300 HD.
RV560 : Radeon X1650.
RV570 : Radeon X1950, X1950 GT; FireGL V7400.
R580 : Radeon X1900, X1950; AMD Stream Processor.
[ 54.176] R600 : Radeon HD 2900 GT/Pro/XT; FireGL V7600/V8600/V8650.
RV610 : Radeon HD 2350, HD 2400 Pro/XT, HD 2400 Pro AGP; FireGL V4000.
RV620 : Radeon HD 3450, HD 3470.
RV630 : Radeon HD 2600 LE/Pro/XT, HD 2600 Pro/XT AGP; Gemini RV630;
FireGL V3600/V5600.
RV635 : Radeon HD 3650, HD 3670.
RV670 : Radeon HD 3690, 3850, HD 3870, FireGL V7700, FireStream 9170.
R680 : Radeon HD 3870 X2.
[ 54.176] M52 : Mobility Radeon X1300.
M54 : Mobility Radeon X1400; M54-GL.
M56 : Mobility Radeon X1600; Mobility FireGL V5200.
M58 : Mobility Radeon X1800, X1800 XT; Mobility FireGL V7100, V7200.
M62 : Mobility Radeon X1350.
M64 : Mobility Radeon X1450, X2300.
M66 : Mobility Radeon X1700, X1700 XT; FireGL V5250.
M68 : Mobility Radeon X1900.
[ 54.176] M71 : Mobility Radeon HD 2300.
M72 : Mobility Radeon HD 2400; Radeon E2400.
M74 : Mobility Radeon HD 2400 XT.
M76 : Mobility Radeon HD 2600;
(Gemini ATI) Mobility Radeon HD 2600 XT.
[ 54.176] M82 : Mobility Radeon HD 3400.
M86 : Mobility Radeon HD 3650, HD 3670, Mobility FireGL V5700.
M88 : Mobility Radeon HD 3850, HD 3850 X2, HD 3870, HD3870 X2.
[ 54.176] RS600 : Radeon Xpress 1200, Xpress 1250.
RS690 : Radeon X1200, X1250, X1270.
RS740 : RS740, RS740M.
RS780 : Radeon HD 3100/3200/3300 Series.
[ 54.176] R700 : Radeon R700.
RV710 : Radeon HD4570, HD4350.
RV730 : Radeon HD4670, HD4650.
RV740 : Radeon HD4770. EXPERIMENTAL AND UNTESTED.
RV770 : Radeon HD 4800 Series; Everest, K2, Denali ATI FirePro.
RV790 : Radeon HD 4890.
[ 54.176] M92 : Mobility Radeon HD4330, HD4530, HD4570. EXPERIMENTAL.
M93 : Mobility Radeon M93. EXPERIMENTAL AND UNTESTED.
M96 : Mobility Radeon HD4600.
M97 : Mobility Radeon HD4860. EXPERIMENTAL AND UNTESTED.
M98 : Mobility Radeon HD4850, HD4870.
[ 54.176]
[ 54.176] (II) RADEONHD: version 1.3.0, built from dist of git branch master, commit 8cbff7bf
[ 54.176] (--) using VT number 7
[ 54.181] (**) RADEONHD(0): Depth 24, (--) framebuffer bpp 32
[ 54.181] (**) RADEONHD(0): Selected EXA 2D acceleration.
[ 54.181] (II) RADEONHD(0): Card not in database: 0x954F:0x174B:0x1341; using generic modesetting.
[ 54.181] If - and only if - your card does not work or does not work optimally
please contact [email protected] to help rectify this.
Use the subject: 0x954F:0x174B:0x1341: <name of board>
and *please* describe the problems you are seeing
in your message.
[ 54.181] (--) RADEONHD(0): Detected an RV710 on an unidentified card
[ 54.181] (II) RADEONHD(0): Mapped IO @ 0x30200000 to 0x7fec7fbe3000 (size 0x00010000)
[ 54.181] (II) RADEONHD(0): PCIE Card Detected
[ 54.181] (II) RADEONHD(0): Getting BIOS copy from legacy VBIOS location
[ 54.183] (II) RADEONHD(0): ATOM BIOS Rom:
[ 54.183] SubsystemVendorID: 0x174b SubsystemID: 0x1341
[ 54.183] IOBaseAddress: 0x2000
[ 54.183] Filename: 1E1341SA.AM1
[ 54.183] BIOS Bootup Message: RV710 HM AMD DDR2 64BIT 600E/400M
[ 54.183] (II) RADEONHD(0): Analog TV Default Mode: 8
[ 54.183] (II) RADEONHD(0): Found default TV Mode PAL
[ 54.183] (II) RADEONHD(0): The detected amount of videoram exceeds the PCI BAR aperture.
[ 54.183] (II) RADEONHD(0): Using only 262144kB of the total 1048576kB.
[ 54.183] (--) RADEONHD(0): VideoRAM: 262144 kByte
[ 54.183] (II) RADEONHD(0): Framebuffer space used by Firmware (kb): 20
[ 54.183] (II) RADEONHD(0): Start of VRAM area used by Firmware: 0xfffec
[ 54.183] (II) RADEONHD(0): AtomBIOS requests 20kB of VRAM scratch space
[ 54.183] (II) RADEONHD(0): AtomBIOS VRAM scratch base: 0xfffec
[ 54.183] (WW) RADEONHD(0): rhdAtomAllocateFbScratch: FW FB scratch area not located at the end of VRAM. Scratch End: 0x104fec VRAM End: 0x10000000
[ 54.183] (II) RADEONHD(0): Cannot get VRAM scratch space. Allocating in main memory instead
[ 54.183] (II) RADEONHD(0): Default Engine Clock: 600000
[ 54.183] (II) RADEONHD(0): Default Memory Clock: 400000
[ 54.183] (II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Output: 1200000
[ 54.183] (II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Output: 0
[ 54.183] (II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Input: 16000
[ 54.183] (II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Input: 6000
[ 54.183] (II) RADEONHD(0): Maximum Pixel Clock: 400000
[ 54.183] (II) RADEONHD(0): Reference Clock: 27000
[ 54.183] (II) RADEONHD(0): Found libdri 5.4.0.
[ 54.183] drmOpenDevice: node name is /dev/dri/card0
[ 54.183] drmOpenDevice: open result is 10, (OK)
[ 54.183] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
[ 54.183] drmOpenDevice: node name is /dev/dri/card0
[ 54.183] drmOpenDevice: open result is 10, (OK)
[ 54.183] drmOpenByBusid: drmOpenMinor returns 10
[ 54.183] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
[ 54.183] (II) RADEONHD(0): Found libdrm 1.3.0.
[ 54.183] (II) RADEONHD(0): Found radeon drm 2.5.0.
[ 54.183] (II) Loading sub module "i2c"
[ 54.183] (II) LoadModule: "i2c"
[ 54.183] (II) Module "i2c" already built-in
[ 54.183] (II) RADEONHD(0): Reference Clock: 27000
[ 54.183] (II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f90
[ 54.183] (II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
[ 54.183] (II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f90
[ 54.183] (II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
[ 54.183] (II) RADEONHD(0): I2C bus "RHD I2C line 0" initialized.
[ 54.183] (II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f94
[ 54.183] (II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
[ 54.184] (II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f94
[ 54.184] (II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
[ 54.184] (II) RADEONHD(0): I2C bus "RHD I2C line 1" initialized.
[ 54.184] (II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f98
[ 54.184] (II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
[ 54.184] (II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f98
[ 54.184] (II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
[ 54.184] (II) RADEONHD(0): I2C bus "RHD I2C line 2" initialized.
[ 54.184] (II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f88
[ 54.184] (II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
[ 54.184] (II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f88
[ 54.184] (II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
[ 54.184] (II) RADEONHD(0): I2C bus "RHD I2C line 3" initialized.
[ 54.184] (II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1fc4
[ 54.184] (II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
[ 54.184] (II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1fc4
[ 54.184] (II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
[ 54.184] (II) RADEONHD(0): I2C bus "RHD I2C line 4" initialized.
[ 54.184] (II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1fe8
[ 54.184] (II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
[ 54.184] (II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1fe8
[ 54.184] (II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
[ 54.184] (II) RADEONHD(0): I2C bus "RHD I2C line 5" initialized.
[ 54.184] (II) Loading sub module "ddc"
[ 54.184] (II) LoadModule: "ddc"
[ 54.184] (II) Module "ddc" already built-in
[ 54.184] (II) RADEONHD(0): Detected VGA mode.
[ 54.184] (**) RADEONHD(0): Using AtomBIOS for Crtcs
[ 54.184] (**) RADEONHD(0): Using AtomBIOS for PLLs
[ 54.184] (II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Output: 0
[ 54.184] (II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Output: 1200000
[ 54.184] (II) RADEONHD(0): Maximum Pixel Clock: 400000
[ 54.184] (II) RADEONHD(0): Reference Clock: 27000
[ 54.184] (II) RADEONHD(0): rhdAtomSetPixelClockVersion returned version 3 for index 0xc
[ 54.184] (II) RADEONHD(0): rhdAtomSetPixelClockVersion returned version 3 for index 0xc
[ 54.184] (II) RADEONHD(0): FB: Allocated Cursor Image at offset 0x00000000 (size = 0x00004000)
[ 54.184] (II) RADEONHD(0): FB: Allocated Cursor Image at offset 0x00004000 (size = 0x00004000)
[ 54.184] (II) RADEONHD(0): FirmwareInfo Revision 0104
[ 54.184] (II) RADEONHD(0): Unused attribute: ul3DAccelerationEngineClock 0
[ 54.184] (II) RADEONHD(0): Unused attribute: ulDriverTargetEngineClock 0
[ 54.184] (II) RADEONHD(0): Unused attribute: ulDriverTargetMemoryClock 0
[ 54.184] (II) RADEONHD(0): Unused attribute: ucASICMaxTemperature 0
[ 54.184] (II) RADEONHD(0): Scary bits: Estimated MinEngineClock 250000 kHz
[ 54.184] (II) RADEONHD(0): Scary bits: Estimated MinMemoryClock 250000 kHz
[ 54.184] (II) RADEONHD(0): Default Engine Clock: 600000
[ 54.184] (II) RADEONHD(0): Default Memory Clock: 400000
[ 54.184] (II) RADEONHD(0): Current Engine Clock: 599060
[ 54.184] (II) RADEONHD(0): Current Memory Clock: 396000
[ 54.184] (II) RADEONHD(0): Current Chip Voltage: 0
[ 54.184] (II) RADEONHD(0): Power Management: used engine clock / memory clock / core (VDDC) voltage (0: ignore)
[ 54.184] (II) RADEONHD(0): Power Management: Raw Ranges
[ 54.184] (II) RADEONHD(0): Minimum 250000 kHz / 250000 kHz / 0.900 V
[ 54.184] (II) RADEONHD(0): Maximum 650000 kHz / 550000 kHz / 1.100 V
[ 54.184] (II) RADEONHD(0): Default 600000 kHz / 400000 kHz / 1.100 V
[ 54.184] (II) RADEONHD(0): PowerPlayInfo Revision 0501
[ 54.184] (EE) RADEONHD(0): Unusupported PowerPlayInfo Revision
[ 54.184] (II) RADEONHD(0): Query for Get Chip Configs: not implemented
[ 54.184] (EE) RADEONHD(0): Power Management: Cannot get known good chip configurations
[ 54.185] (II) RADEONHD(0): Power Management: Validated Ranges
[ 54.185] (II) RADEONHD(0): Minimum 250000 kHz / 250000 kHz / 0.900 V
[ 54.185] (II) RADEONHD(0): Maximum 650000 kHz / 550000 kHz / 1.100 V
[ 54.185] (II) RADEONHD(0): Default 600000 kHz / 400000 kHz / 1.100 V
[ 54.185] (II) RADEONHD(0): Power Management: Final Levels
[ 54.185] (II) RADEONHD(0): Off 250000 kHz / 250000 kHz / 0.900 V
[ 54.185] (II) RADEONHD(0): Idle 600000 kHz / 400000 kHz / 1.100 V
[ 54.185] (II) RADEONHD(0): Slow2D 600000 kHz / 400000 kHz / 1.100 V
[ 54.185] (II) RADEONHD(0): Fast2D 600000 kHz / 400000 kHz / 1.100 V
[ 54.185] (II) RADEONHD(0): Slow3D 600000 kHz / 400000 kHz / 1.100 V
[ 54.185] (II) RADEONHD(0): Fast3D 600000 kHz / 400000 kHz / 1.100 V
[ 54.185] (II) RADEONHD(0): Max3D 650000 kHz / 550000 kHz / 1.100 V
[ 54.185] (II) RADEONHD(0): User 600000 kHz / 400000 kHz / 1.100 V
[ 54.185] (II) RADEONHD(0): Connector[0] {RHD_CONNECTOR_VGA, "VGA CRT2", RHD_DDC_0, RHD_HPD_NONE, { RHD_OUTPUT_DACB, RHD_OUTPUT_NONE } }
[ 54.185] (II) RADEONHD(0): Connector[1] {RHD_CONNECTOR_DVI_SINGLE, "HDMI_TYPE_A DFP1", RHD_DDC_4, RHD_HPD_0, { RHD_OUTPUT_UNIPHYB, RHD_OUTPUT_NONE } }
[ 54.185] (II) RADEONHD(0): Connector[2] {RHD_CONNECTOR_DVI, "DUAL_LINK_DVI_I CRT1 DFP2", RHD_DDC_1, RHD_HPD_3, { RHD_OUTPUT_UNIPHYE, RHD_OUTPUT_DACA } }
[ 54.185] (**) RADEONHD(0): Using AtomBIOS for Outputs
[ 54.185] (II) RADEONHD(0): rhdAtomSelectCrtcSourceVersion returned version 2 for index 0x2a
[ 54.185] (--) RADEONHD(0): Attaching Output AtomOutputDACB to Connector VGA 1
[ 54.185] (**) RADEONHD(0): Using AtomBIOS for Outputs
[ 54.185] (EE) RADEONHD(0): RHDHdmiInit: unknown HDMI output type
[ 54.185] (II) RADEONHD(0): rhdAtomSelectCrtcSourceVersion returned version 2 for index 0x2a
[ 54.185] (--) RADEONHD(0): Attaching Output AtomOutputUniphyB to Connector DVI-D 1
[ 54.185] (**) RADEONHD(0): Using AtomBIOS for Outputs
[ 54.185] (EE) RADEONHD(0): RHDHdmiInit: unknown HDMI output type
[ 54.185] (II) RADEONHD(0): rhdAtomSelectCrtcSourceVersion returned version 2 for index 0x2a
[ 54.185] (--) RADEONHD(0): Attaching Output AtomOutputUniphyE to Connector DVI-I 2
[ 54.185] (**) RADEONHD(0): Using AtomBIOS for Outputs
[ 54.185] (II) RADEONHD(0): rhdAtomSelectCrtcSourceVersion returned version 2 for index 0x2a
[ 54.185] (--) RADEONHD(0): Attaching Output AtomOutputDACA to Connector DVI-I 2
[ 54.185] (II) RADEONHD(0): RandR: Adding RRoutput VGA_1 for Output AtomOutputDACB
[ 54.185] (II) RADEONHD(0): RandR: Adding RRoutput DVI-D_1 for Output AtomOutputUniphyB
[ 54.185] (II) RADEONHD(0): RandR: Adding RRoutput DVI-I_2/digital for Output AtomOutputUniphyE
[ 54.185] (II) RADEONHD(0): RandR: Adding RRoutput DVI-I_2/analog for Output AtomOutputDACA
[ 54.185] (II) RADEONHD(0): Output VGA_1 using monitor section Monitor0
[ 54.185] (II) RADEONHD(0): Output VGA_1 has no monitor section
[ 54.185] (II) RADEONHD(0): Output DVI-D_1 has no monitor section
[ 54.185] (II) RADEONHD(0): Output DVI-I_2/digital has no monitor section
[ 54.185] (II) RADEONHD(0): Output DVI-I_2/analog has no monitor section
[ 54.185] (II) RADEONHD(0): Calling DAC_LoadDetection
[ 54.191] (II) RADEONHD(0): DAC_LoadDetection Successful
[ 54.191] (II) RADEONHD(0): EDID for output VGA_1
[ 54.191] (II) RADEONHD(0): EDID for output DVI-D_1
[ 54.191] (II) RADEONHD(0): EDID for output DVI-I_2/digital
[ 54.191] (II) RADEONHD(0): EDID for output DVI-I_2/analog
[ 54.191] (II) RADEONHD(0): Output VGA_1 disconnected
[ 54.191] (II) RADEONHD(0): Output DVI-D_1 disconnected
[ 54.191] (II) RADEONHD(0): Output DVI-I_2/digital disconnected
[ 54.191] (II) RADEONHD(0): Output DVI-I_2/analog disconnected
[ 54.191] (WW) RADEONHD(0): No outputs definitely connected, trying again...
[ 54.191] (II) RADEONHD(0): Output VGA_1 disconnected
[ 54.191] (II) RADEONHD(0): Output DVI-D_1 disconnected
[ 54.191] (II) RADEONHD(0): Output DVI-I_2/digital disconnected
[ 54.191] (II) RADEONHD(0): Output DVI-I_2/analog disconnected
[ 54.191] (WW) RADEONHD(0): Unable to find initial modes
[ 54.191] (EE) RADEONHD(0): RandR: No valid modes. Disabling RandR support.
[ 54.191] (II) RADEONHD(0): Calling DAC_LoadDetection
[ 54.197] (II) RADEONHD(0): DAC_LoadDetection Successful
[ 54.197] (EE) RADEONHD(0): Failed to detect a connected monitor
[ 54.197]
Backtrace:
[ 54.197] 0: X (xorg_backtrace+0x28) [0x49f558]
[ 54.197] 1: X (0x400000+0x67939) [0x467939]
[ 54.197] 2: /lib/libpthread.so.0 (0x7fec7ef28000+0xf1c0) [0x7fec7ef371c0]
[ 54.197] 3: X (xf86InitViewport+0xbf) [0x480f6f]
[ 54.197] 4: X (InitOutput+0xacc) [0x47025c]
[ 54.197] 5: X (0x400000+0x2108d) [0x42108d]
[ 54.197] 6: /lib/libc.so.6 (__libc_start_main+0xfd) [0x7fec7debbc4d]
[ 54.197] 7: X (0x400000+0x20de9) [0x420de9]
[ 54.198] Segmentation fault at address 0x24
[ 54.198]
Fatal server error:
[ 54.198] Caught signal 11 (Segmentation fault). Server aborting
[ 54.198]
[ 54.198]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 54.198] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 54.198]
Das heißt auf Deutsch dass ich die Xorg.0.log und noch paar andere Dateien reinkopiert habe.
Last edited by tupolew.eljam (2010-09-12 16:58:27)I tried it with xf86-video-ati, but it didnt worked.
Heres the logfile:
[ 50.479]
X.Org X Server 1.9.0
Release Date: 2010-08-20
[ 50.480] X Protocol Version 11, Revision 0
[ 50.480] Build Operating System: Linux 2.6.34-ARCH x86_64
[ 50.480] Current Operating System: Linux myhost 2.6.35-ARCH #1 SMP PREEMPT Fri Aug 27 17:14:28 CEST 2010 x86_64
[ 50.480] Kernel command line: root=/dev/disk/by-uuid/690cd2a9-efb4-466c-a51f-dbba2903989b ro
[ 50.480] Build Date: 24 August 2010 01:44:37PM
[ 50.480]
[ 50.480] Current version of pixman: 0.18.4
[ 50.480] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 50.480] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 50.480] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jan 5 05:14:54 2004
[ 50.481] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 50.481] (==) No Layout section. Using the first Screen section.
[ 50.481] (**) |-->Screen "Screen0" (0)
[ 50.481] (**) | |-->Monitor "Monitor0"
[ 50.481] (**) | |-->Device "Device0"
[ 50.481] (==) Automatically adding devices
[ 50.481] (==) Automatically enabling devices
[ 50.481] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 50.481] Entry deleted from font path.
[ 50.481] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 50.481] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 50.481] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 50.482] (II) Loader magic: 0x7d4880
[ 50.482] (II) Module ABI versions:
[ 50.482] X.Org ANSI C Emulation: 0.4
[ 50.482] X.Org Video Driver: 8.0
[ 50.482] X.Org XInput driver : 11.0
[ 50.482] X.Org Server Extension : 4.0
[ 50.483] (--) PCI:*(0:1:0:0) 1002:954f:174b:1341 rev 0, Mem @ 0x20000000/268435456, 0x30200000/65536, I/O @ 0x00002000/256, BIOS @ 0x????????/131072
[ 50.483] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 50.483] (II) LoadModule: "extmod"
[ 50.483] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 50.483] (II) Module extmod: vendor="X.Org Foundation"
[ 50.483] compiled for 1.9.0, module version = 1.0.0
[ 50.483] Module class: X.Org Server Extension
[ 50.483] ABI class: X.Org Server Extension, version 4.0
[ 50.483] (II) Loading extension MIT-SCREEN-SAVER
[ 50.483] (II) Loading extension XFree86-VidModeExtension
[ 50.483] (II) Loading extension XFree86-DGA
[ 50.483] (II) Loading extension DPMS
[ 50.483] (II) Loading extension XVideo
[ 50.483] (II) Loading extension XVideo-MotionCompensation
[ 50.484] (II) Loading extension X-Resource
[ 50.484] (II) LoadModule: "dbe"
[ 50.484] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 50.484] (II) Module dbe: vendor="X.Org Foundation"
[ 50.484] compiled for 1.9.0, module version = 1.0.0
[ 50.484] Module class: X.Org Server Extension
[ 50.484] ABI class: X.Org Server Extension, version 4.0
[ 50.484] (II) Loading extension DOUBLE-BUFFER
[ 50.484] (II) LoadModule: "glx"
[ 50.484] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 50.484] (II) Module glx: vendor="X.Org Foundation"
[ 50.484] compiled for 1.9.0, module version = 1.0.0
[ 50.484] ABI class: X.Org Server Extension, version 4.0
[ 50.484] (==) AIGLX enabled
[ 50.484] (II) Loading extension GLX
[ 50.484] (II) LoadModule: "record"
[ 50.484] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 50.484] (II) Module record: vendor="X.Org Foundation"
[ 50.484] compiled for 1.9.0, module version = 1.13.0
[ 50.484] Module class: X.Org Server Extension
[ 50.484] ABI class: X.Org Server Extension, version 4.0
[ 50.484] (II) Loading extension RECORD
[ 50.484] (II) LoadModule: "dri"
[ 50.485] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 50.485] (II) Module dri: vendor="X.Org Foundation"
[ 50.485] compiled for 1.9.0, module version = 1.0.0
[ 50.485] ABI class: X.Org Server Extension, version 4.0
[ 50.485] (II) Loading extension XFree86-DRI
[ 50.485] (II) LoadModule: "dri2"
[ 50.485] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 50.485] (II) Module dri2: vendor="X.Org Foundation"
[ 50.485] compiled for 1.9.0, module version = 1.2.0
[ 50.485] ABI class: X.Org Server Extension, version 4.0
[ 50.485] (II) Loading extension DRI2
[ 50.485] (II) LoadModule: "xf86-video-radeonhd"
[ 50.486] (WW) Warning, couldn't open module xf86-video-radeonhd
[ 50.486] (II) UnloadModule: "xf86-video-radeonhd"
[ 50.486] (EE) Failed to load module "xf86-video-radeonhd" (module does not exist, 0)
[ 50.486] (EE) No drivers available.
[ 50.486]
Fatal server error:
[ 50.486] no screens found
[ 50.486]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 50.486] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 50.486]
Last edited by tupolew.eljam (2010-09-12 18:54:56) -
Tty display problems with nvidia and uvesafb
I'm trying to get my console to display correctly at 1080p; trying to do so through GRUB was always an absolute nightmare.
The console displays fine with nouveau, but nouveau causes the infamous pink line bug, which is simply too irritating to ignore; nouveau is not an option.
In the past, my console has run at low res and incorrect scale with nvidia, but I've ignored the problem since I prefer to use a virtual terminal in X.
Now, if possible, I need to use the actual console for the purposes of module development.
I installed v86d and uvesafb and configured the console for 1920x1080 and 32 bit depth.
The console is displaying with the correct resolution now, but is surrounded by a black border, making the font distorted and extremely difficult to read.
How can I get my console to scale correctly to fullscreen? Any ideas at all. I found nothing in the forums or wiki, and I'm out.
I'm fairly certain there are no vga or video settings in GRUB that are interfering.Output of "pacman -Qi nvidia"
Name : nvidia
Version : 343.36-2
Description : NVIDIA drivers for linux
Architecture : x86_64
URL : http://www.nvidia.com/
Licenses : custom
Groups : None
Provides : None
Depends On : linux>=3.17 linux<3.18 nvidia-libgl nvidia-utils=343.36
Optional Deps : None
Required By : None
Optional For : None
Conflicts With : None
Replaces : None
Installed Size : 5.30 MiB
Packager : Felix Yan <[email protected]>
Build Date : Thu 11 Dec 2014 08:32:19 AM CST
Install Date : Fri 12 Dec 2014 12:10:32 AM CST
Install Reason : Explicitly installed
Install Script : Yes
Validated By : Signature
Output "cat /boot/grub/grub.cfg"
# DO NOT EDIT THIS FILE
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
### BEGIN /etc/grub.d/00_header ###
insmod part_gpt
insmod part_msdos
if [ -s $prefix/grubenv ]; then
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
set menu_color_normal=green/black
set menu_color_highlight=black/green
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 337acc84-0300-43b1-b426-79391d39e898
else
search --no-floppy --fs-uuid --set=root 337acc84-0300-43b1-b426-79391d39e898
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=en_US
insmod gettext
fi
terminal_input console
terminal_output gfxterm
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 337acc84-0300-43b1-b426-79391d39e898
else
search --no-floppy --fs-uuid --set=root 337acc84-0300-43b1-b426-79391d39e898
fi
insmod png
background_image -m stretch /boot/grub/archgrub.png
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=menu
set timeout=5
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
set timeout=5
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Arch Linux' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-337acc84-0300-43b1-b426-79391d39e898' {
load_video
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 337acc84-0300-43b1-b426-79391d39e898
else
search --no-floppy --fs-uuid --set=root 337acc84-0300-43b1-b426-79391d39e898
fi
echo 'Loading Linux linux ...'
linux /boot/vmlinuz-linux root=UUID=337acc84-0300-43b1-b426-79391d39e898 rw quiet
echo 'Loading initial ramdisk ...'
initrd /boot/initramfs-linux.img
submenu 'Advanced options for Arch Linux' $menuentry_id_option 'gnulinux-advanced-337acc84-0300-43b1-b426-79391d39e898' {
menuentry 'Arch Linux, with Linux linux' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-linux-advanced-337acc84-0300-43b1-b426-79391d39e898' {
load_video
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 337acc84-0300-43b1-b426-79391d39e898
else
search --no-floppy --fs-uuid --set=root 337acc84-0300-43b1-b426-79391d39e898
fi
echo 'Loading Linux linux ...'
linux /boot/vmlinuz-linux root=UUID=337acc84-0300-43b1-b426-79391d39e898 rw quiet
echo 'Loading initial ramdisk ...'
initrd /boot/initramfs-linux.img
menuentry 'Arch Linux, with Linux linux (fallback initramfs)' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-linux-fallback-337acc84-0300-43b1-b426-79391d39e898' {
load_video
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 337acc84-0300-43b1-b426-79391d39e898
else
search --no-floppy --fs-uuid --set=root 337acc84-0300-43b1-b426-79391d39e898
fi
echo 'Loading Linux linux ...'
linux /boot/vmlinuz-linux root=UUID=337acc84-0300-43b1-b426-79391d39e898 rw quiet
echo 'Loading initial ramdisk ...'
initrd /boot/initramfs-linux-fallback.img
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
### BEGIN /etc/grub.d/60_memtest86+ ###
### END /etc/grub.d/60_memtest86+ ###
Output "cat /usr/lib/modprobe.d/uvesafb.conf"
Video mode is set as "1920x1080-32".
# This file sets the parameters for uvesafb module.
# The following format should be used:
# options uvesafb mode=<xres>x<yres>[-<bpp>][@<refresh>] scroll=<ywrap|ypan|redraw> ...
# For more details see:
# http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=blob;f=Documentation/fb/uvesafb.txt
options uvesafb mode_option=1920x1080-32 scroll=ywrap
This file is mirrored in /etc/modprobe.d/uvesafb.conf.
Running "diff /usr/lib/modprobe.d/uvesafb.conf /etc/modprobe.d/uvesafb.conf" returns no output.
Output of "cat /sys/class/graphics/fb0/virtual_size" is solely "1920,1080".
---edit---
Output of "cat /etc/default/grub" in case it's helpful.
GRUB_DEFAULT=0
GRUB_TIMEOUT=5
GRUB_DISTRIBUTOR="Arch"
GRUB_CMDLINE_LINUX_DEFAULT="quiet"
GRUB_CMDLINE_LINUX=""
# Preload both GPT and MBR modules so that they are not missed
GRUB_PRELOAD_MODULES="part_gpt part_msdos"
# Uncomment to enable Hidden Menu, and optionally hide the timeout count
#GRUB_HIDDEN_TIMEOUT=5
#GRUB_HIDDEN_TIMEOUT_QUIET=true
# Uncomment to use basic console
GRUB_TERMINAL_INPUT=console
# Uncomment to disable graphical terminal
#GRUB_TERMINAL_OUTPUT=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
GRUB_GFXMODE=auto
# Uncomment to allow the kernel use the same resolution used by grub
#GRUB_GFXPAYLOAD_LINUX=keep
# Uncomment if you want GRUB to pass to the Linux kernel the old parameter
# format "root=/dev/xxx" instead of "root=/dev/disk/by-uuid/xxx"
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
GRUB_DISABLE_RECOVERY=true
# Uncomment and set to the desired menu colors. Used by normal and wallpaper
# modes only. Entries specified as foreground/background.
GRUB_COLOR_NORMAL="green/black"
GRUB_COLOR_HIGHLIGHT="black/green"
# Uncomment one of them for the gfx desired, a image background or a gfxtheme
GRUB_BACKGROUND="/boot/grub/archgrub.png"
#GRUB_THEME="/path/to/gfxtheme"
# Uncomment to get a beep at GRUB start
#GRUB_INIT_TUNE="480 440 1"
#GRUB_SAVEDEFAULT="true"
Also, it might help to describe the behaviour more specifically / more in depth...
The rendered part of the console occupies the same space as the GRUB boot menu.
I installed and configured virtualbox a few weeks previously.
I ran "sudo depmod -a" as the wiki / forums indicated it could remedy problems with virtual machines failing to start.
It did fix the virtualbox problem; after reboot, suddenly lightdm *also* initally occupied the same window space as grub.
That was new behaviour. When I logged in to xmonad, the desktop displayed similarly to GRUB.
I hadn't tried fixing it; logging in with root followed by "ps -e | grep X" and "kill -9 <Xpid>" caused X as a whole to start behaving and scaling normally.
I haven't rebooted until attempting to rectify the issue with my console.
The oddity with scaling in lightdm and xmonad still shows up after reboot and is still reparable by killing X.
Killing X doesn't - obviously - have any effect on console scale.
---/edit---
d(-_-)
Last edited by seppukuzushi (2014-12-31 14:01:23) -
Problem with truncate table in procedure ora -00054
hi do anybody know where is mistake ???
the procedure has problem with truncate table
ora - 00054: resource busy and acquire with NOWAIT specified
ora - 06512 at "POVAPSYS.HMAN_P_REFRESH", line 6
ora - 06512 at "POVAPSYS.POVAPSYS", line 6
ora - 06512 at line 1
this is my procedure....
AS
BEGIN
execute immediate 'TRUNCATE TABLE hman_t_max';
INSERT INTO hman_t_max SELECT * FROM hman_v_max;
COMMIT;
END;2.MAKE SURE THAT OTHER THAN YOU ANYBODY IS TRYING TO
COMPILE AND RUN THE PROCEDUREShould he make sure that anybody is running the procedure?
3.MAKE SURE THAT ANY PARALLEL QUERY IS RUNNING IN THE
SERVER SIDE,THATS KEEPS THE RESOURCE BUSYShould he make sure any parallel query is running in the server side to keep the resource busy?
Gita,
I COULDN'T RESIST HAVING ONE SUGGESTION FOR YOU. Please look at the impact of your English in the reply before posting. Check if that sends reverse message!
Cheers
Sarma. -
Problem with Compiz Fusion 0.5.2 Internal Server Error
I trying compiz fusion 0.5.2 version, but I have this error:
$ sudo pacman -Sy compiz-fusion
:: Synchronizing package databases...
current is up to date
extra is up to date
community is up to date
compiz-fusion is up to date
:: group compiz-fusion:
ccsm compiz-bcop compiz-fusion-plugins-extra compiz-fusion-plugins-main compiz-fusion-plugins-unsupported
compizconfig-python emerald emerald-themes libcompizconfig
:: Install whole content? [Y/n]
resolving dependencies... done.
looking for inter-conflicts...
:: compiz conflicts with compiz-git. Remove compiz-git? [Y/n]
done.
Remove: compiz-git
Targets: compiz-0.5.2-1 libcompizconfig-0.5.2-1 compizconfig-python-0.5.2-1 ccsm-0.5.2-1 compiz-bcop-0.5.2-1
compiz-fusion-plugins-main-0.5.2-1 compiz-fusion-plugins-extra-0.5.2-1
compiz-fusion-plugins-unsupported-0.5.2-1 beryl-core-0.2.1-1 emerald-0.2.1-1 emerald-themes-0.2.1-1
Total Package Size: 6.19 MB
Total Installed Size: 13.91 MB
Proceed with installation? [Y/n]
:: Retrieving packages from compiz-fusion...
error: failed retrieving file 'compiz-fusion-plugins-main-0.5.2-1-i686.pkg.tar.gz' from arch.nesl247.org : Internal Server Error
error: failed retrieving file 'compiz-fusion-plugins-extra-0.5.2-1-i686.pkg.tar.gz' from arch.nesl247.org : Internal Server Error
error: failed retrieving file 'compiz-fusion-plugins-unsupported-0.5.2-1-i686.pkg.tar.gz' from arch.nesl247.org : Internal Server Error
warning: failed to retrieve some files from compiz-fusion
error: failed to commit transaction (unexpected error)
What's the problem with this three packages?.
Best regards.You can install the packages from AUR too (you will need to compile them).
Ive compiled the packlages with GNOME support and athlon optimizations and puted on my ftp:
http://download.tuxfamily.org/oproj/compizfusion/ -
Cdrecord permission problems with k3b
when trying to write cds and dvds i get the following error:
for some reason cdrecord has no permissions to the device with my user.
my user is member of optical. i also tried:
- burning group
- older cdrkit package
- older udev and udev-compat packages
- k3b-git from aur
with no luck.
I have to mention that i never had any problems with cd/dvd writing and i believe that it has to do with some of the latest updates.
Any idea?today i tested k3b in a simular arch installation in my lenovo r61 laptop and there is no problem at all.
It seems that the problem is machine/installation dependable.
@Mr Green
Yes the device is the right one.
I will try cdrecord from command line and post here the results.
Last edited by mechmg93 (2011-01-07 10:49:07) -
I've been getting this message recently when executing the build script in the releng profile of archiso. This happens even with an unmodified source.
Here's the error:
sed: can't read /home/bran/archlive/build.sh/pacman.conf: Not a directory
Here's the code that causes this error:
# Setup custom pacman.conf with current cache directories.
make_pacman_conf() {
local _cache_dirs
_cache_dirs=($(pacman -v 2>&1 | grep '^Cache Dirs:' | sed 's/Cache Dirs:\s*//g'))
sed -r "s|^#?\\s*CacheDir.+|CacheDir = $(echo -n ${_cache_dirs[@]})|g" ${script_path}/pacman.conf > ${pacman_conf}
Variable Definitions
pacman_conf=${work_dir}/pacman.conf
script_path=$(readlink -f ${0%/*})
work_dir=/home/bran/archlive/work
If I comment out that sed expression it continues until it tries to build the ISO, so it actually seems like it's a problem with the script_path variable, considering the output from stdout
grep: /home/bran/archlive/build.sh/packages.both: Not a directory
grep: /home/bran/archlive/build.sh/packages.i686: Not a directory
[mkarchiso] ERROR: Packages must be specified
usage mkarchiso [options] command <command options>
Essentially what I'm getting from this is that it thinks my script path is /home/bran/archlive/build.sh/ instead of just /home/bran/archlive/
Any idea on how to fix this so that it can be submitted to the archiso-git maintainer?
Last edited by brando56894 (2013-11-13 06:08:03)You want me to paste the output of help??
[bran@ra ~/archlive]$ sudo bash build.sh -h
usage build.sh [options]
General options:
-N <iso_name> Set an iso filename (prefix)
Default: archlinux
-V <iso_version> Set an iso version (in filename)
Default: 2013.11.12
-L <iso_label> Set an iso label (disk label)
Default: ARCH_201311
-D <install_dir> Set an install_dir (directory inside iso)
Default: arch
-w <work_dir> Set the working directory
Default: work
-o <out_dir> Set the output directory
Default: out
-v Enable verbose output
-h This help message
Your suspicion seems to be correct, but do you know why? I'm curious.
[bran@ra ~]$ cp -r /usr/share/archiso/configs/releng .
[bran@ra ~]$ cd releng/
[bran@ra ~/releng]$ sudo bash build.sh -v
sed: can't read /home/bran/releng/build.sh/pacman.conf: Not a directory
[bran@ra ~/releng]$ sudo ./build.sh -v
[mkarchiso] INFO: Configuration settings
[mkarchiso] INFO: Command: init
[mkarchiso] INFO: Architecture: i686
[mkarchiso] INFO: Working directory: work/i686
[mkarchiso] INFO: Installation directory: arch
[mkarchiso] INFO: Pacman config file: work/pacman.conf
[mkarchiso] INFO: Installing packages to 'work/i686/root-image/'...
==> Creating install root at work/i686/root-image
==> Installing packages to work/i686/root-image
:: Synchronizing package databases...
core 106.8 KiB 380K/s 00:00 [############################################################] 100%
^Cxtra 849.6 KiB 735K/s 00:00 [##################################--------------------------] 57%
Interrupt signal received -
I am trying to implement some kind of a server listening for requests. The listener part of the app, is a daemon thread that listens for connections and instantiates a handling daemon thread once it gets some. However, my problem is that i must be able to kill the listening thread at the user's will (say via a sto button). I have done this via the Sun's proposed way, by testing a boolean flag in the loop, which is set to false when i wish to kill the thread. The problem with this thing is the following...
Once the thread starts excecuting, it will test the flag, find it true and enter the loop. At some point it will LOCK on the server socket waiting for connection. Unless some client actually connects, it will keep on listening indefinatelly whithought ever bothering to check for the flag again (no matter how many times you set the damn thing to false).
My question is this: Is there any real, non-theoretical, applied way to stop thread in java safely?
Thank you in advance,
LeftyThis was one solution from the socket programming forum, have you tried this??
public Thread MyThread extends Thread{
boolean active = true;
public void run(){
ss.setSoTimeout(90);
while (active){
try{
serverSocket = ss.accept();
catch (SocketTimeoutException ste){
// do nothing
// interrupt thread
public void deactivate(){
active = false;
// you gotta sleep for a time longer than the
// accept() timeout to make sure that timeout is finished.
try{
sleep(91);
}catch (InterruptedException ie){
interrupt();
} -
Problem with Threads and a static variable
I have a problem with the code below. I am yet to make sure that I understand the problem. Correct me if I am wrong please.
Code functionality:
A timer calls SetState every second. It sets the state and sets boolean variable "changed" to true. Then notifies a main process thread to check if the state changed to send a message.
The problem as far I understand is:
Assume the timer Thread calls SetState twice before the main process Thread runs. As a result, "changed" is set to true twice. However, since the main process is blocked twice during the two calls to SetState, when it runs it would have the two SetState timer threads blocked on its synchronized body. It will pass the first one, send the message and set "changed" to false since it was true. Now, it will pass the second thread, but here is the problem, "changed" is already set to false. As a result, it won't send the message even though it is supposed to.
Would you please let me know if my understanding is correct? If so, what would you propose to resolve the problem? Should I call wait some other or should I notify in a different way?
Thanks,
B.D.
Code:
private static volatile boolean bChanged = false;
private static Thread objMainProcess;
protected static void Init(){
objMainProcess = new Thread() {
public void run() {
while( objMainProcess == Thread.currentThread() ) {
GetState();
objMainProcess.setDaemon( true );
objMainProcess.start();
public static void initStatusTimer(){
if(objTimer == null)
objTimer = new javax.swing.Timer( 1000, new java.awt.event.ActionListener(){
public void actionPerformed( java.awt.event.ActionEvent evt){
SetState();
private static void SetState(){
if( objMainProcess == null ) return;
synchronized( objMainProcess ) {
bChanged = true;
try{
objMainProcess.notify();
}catch( IllegalMonitorStateException e ) {}
private static boolean GetState() {
if( objMainProcess == null ) return false;
synchronized( objMainProcess ) {
if( bChanged) {
SendMessage();
bChanged = false;
return true;
try {
objMainProcess.wait();
}catch( InterruptedException e ) {}
return false;
}Thanks DrClap for your reply. Everything you said is right. It is not easy to make them alternate since SetState() could be called from different places where the state could be anything else but a status message. Like a GREETING message for example. It is a handshaking message but not a status message.
Again as you said, There is a reason I can't call sendMessage() inside setState().
The only way I was able to do it is by having a counter of the number of notifies that have been called. Every time notify() is called a counter is incremented. Now instead of just checking if "changed" flag is true, I also check if notify counter is greater than zero. If both true, I send the message. If "changed" flag is false, I check again if the notify counter is greater than zero, I send the message. This way it works, but it is kind of a patch than a good design fix. I am yet to find a good solution.
Thanks,
B.D. -
Problem with threads running javaw
Hi,
Having a problem with multi thread programming using client server sockets. The program works find when starting the the application in a console using java muti.java , but when using javaw multi.java the program doesnt die and have to kill it in the task manager. The program doesnt display any of my gui error messages either when the server disconnect the client. all works find in a console. any advice on this as I havent been able to understand why this is happening? any comment would be appreciated.
troy.troy,
Try and post a minimum code sample of your app which
does not work.
When using javaw, make sure you redirect the standard
error and standard output streams to file.
Graeme.Hi Graeme,
I dont understand what you mean by redirection to file? some of my code below.
The code works fine under a console, code is supposed to exit when the client (the other server )disconnects. the problem is that but the clientworker side of the code still works. which under console it doesnt.
public class Server{
ServerSocket aServerSocket;
Socket dianosticsSocket;
Socket nPortExpress;
ClientListener aClientListener;
LinkedList queue = new LinkedList();
int port = 0;
int clientPort = 0;
String clientName = null;
boolean serverAlive = true;
* Server constructor generates a server
* Socket and then starts a client threads.
* @param aPort socket port of local machine.
public Server(int aPort, String aClientName, int aClientPort){
port = aPort;
clientName = aClientName;
clientPort = aClientPort;
try{
// create a new thread
aServerSocket = new ServerSocket(port) ;
// connect to the nPortExpress
aClientListener = new ClientListener(InetAddress.getByName(clientName), clientPort, queue,this);
// aClientListener.setDaemon(true);
aClientListener.start();
// start a dianostic port
DiagnosticsServer aDiagnosticsServer = new DiagnosticsServer(port,queue,aClientListener);
// System.out.println("Server is running on port " + port + "...");
// System.out.println("Connect to nPort");
catch(Exception e)
// System.out.println("ERROR: Server port " + port + " not available");
JOptionPane.showMessageDialog(null, (e.toString()),"ERROR: Server port " + port + " not available", JOptionPane.ERROR_MESSAGE);
serverAlive = false;
System.exit(1);
while(serverAlive&&aClientListener.hostSocket.isConnected()){
try{
// connect the client
Socket aClient = aServerSocket.accept();
//System.out.println("open client connection");
//System.out.println("client local: "+ aClient.getLocalAddress().toString());
// System.out.println("client localport: "+ aClient.getLocalPort());
// System.out.println("client : "+ aClient.getInetAddress().toString());
// System.out.println("client port: "+ aClient.getLocalPort());
// make a new client thread
ClientWorker clientThread = new ClientWorker(aClient, queue, aClientListener, false);
// start thread
clientThread.start();
catch(Exception e)
//System.out.println("ERROR: Client connection failure");
JOptionPane.showMessageDialog(null, (e.toString()),"ERROR: Client connection failure", JOptionPane.ERROR_MESSAGE);
}// end while
} // end constructor Server
void serverExit(){
JOptionPane.showMessageDialog(null, "Server ","ERROR: nPort Failure", JOptionPane.ERROR_MESSAGE);
System.exit(1);
}// end class Server
*** connect to another server
public class ClientListener extends Thread{
InetAddress hostName;
int hostPort;
Socket hostSocket;
BufferedReader in;
PrintWriter out;
boolean loggedIn;
LinkedList queue; // reference to Server queue
Server serverRef; // reference to main server
* ClientListener connects to the host server.
* @param aHostName is the name of the host eg server name or IP address.
* @param aHostPort is a port number of the host.
* @param aLoginName is the users login name.
public ClientListener(InetAddress aHostName, int aHostPort,LinkedList aQueue,Server aServer) // reference to Server queue)
hostName = aHostName;
hostPort = aHostPort;
queue = aQueue;
serverRef = aServer;
// connect to the server
try{
hostSocket = new Socket(hostName, hostPort);
catch(IOException e){
//System.out.println("ERROR: Connection Host Failed");
JOptionPane.showMessageDialog(null, (e.toString()),"ERROR: Connection to nPort Failed", JOptionPane.ERROR_MESSAGE);
System.exit(0);
} // end constructor ClientListener
** multi client connection server
ClientWorker(Socket aSocket,LinkedList aQueue, ClientListener aClientListener, boolean diagnostics){
queue = aQueue;
addToQueue(this);
client = aSocket;
clientRef = aClientListener;
aDiagnostic = diagnostics;
} // end constructor ClientWorker
* run method is the main loop of the server program
* in change of handle new client connection as well
* as handle all messages and errors.
public void run(){
boolean alive = true;
String aSubString = "";
in = null;
out = null;
loginName = "";
loggedIn = false;
while (alive && client.isConnected()&& clientRef.hostSocket.isConnected()){
try{
in = new BufferedReader(new InputStreamReader(client.getInputStream()));
out = new PrintWriter(new OutputStreamWriter(client.getOutputStream()));
if(aDiagnostic){
out.println("WELCOME to diagnostics");
broadCastDia("Connect : diagnostics "+client.getInetAddress().toString());
out.flush();
else {
out.println("WELCOME to Troy's Server");
broadCastDia("Connect : client "+client.getInetAddress().toString());
out.flush();
String line;
while(((line = in.readLine())!= null)){
StringTokenizer aStringToken = new StringTokenizer(line, " ");
if(!aDiagnostic){
broadCastDia(line);
clientRef.sendMessage(line); // send mesage out to netExpress
out.println(line);
out.flush();
else{
if(line.equals("GETIPS"))
getIPs();
else{
clientRef.sendMessage(line); // send mesage out to netExpress
out.println(line);
out.flush();
} // end while
catch(Exception e){
// System.out.println("ERROR:Client Connection reset");
JOptionPane.showMessageDialog(null, (e.toString()),"ERROR:Client Connection reset", JOptionPane.ERROR_MESSAGE);
try{
if(aDiagnostic){
broadCastDia("Disconnect : diagnostics "+client.getInetAddress().toString());
out.flush();
else {
broadCastDia("Disconnect : client "+client.getInetAddress().toString());
out.flush();
// close the buffers and connection;
in.close();
out.close();
client.close();
// System.out.println("out");
// remove from list
removeThreadQueue(this);
alive = false;
catch(Exception e){
// System.out.println("ERROR: Client Connection reset failure");
JOptionPane.showMessageDialog(null, (e.toString()),"ERROR: Client Connection reset failure", JOptionPane.ERROR_MESSAGE);
}// end while
} // end method run
* method run - Generates io stream for communicating with the server and
* starts the client gui. Run also parses the input commands from the server.
public void run(){
boolean alive = true;
try{
// begin to life the gui
// aGuiClient = new ClientGui(hostName.getHostName(), hostPort, loginName, this);
// aGuiClient.show();
in = new BufferedReader(new InputStreamReader(hostSocket.getInputStream()));
out = new PrintWriter(new OutputStreamWriter(hostSocket.getOutputStream()));
while (alive && hostSocket.isConnected()){
String line;
while(((line = in.readLine())!= null)){
System.out.println(line);
broadCast(line);
} // end while
} // end while
catch(Exception e){
// System.out.println("ERRORa Connection to host reset");
JOptionPane.showMessageDialog(null, (e.toString()),"ERROR: Connection to nPort reset", JOptionPane.ERROR_MESSAGE);
try{
hostSocket.close();
}catch(Exception a){
JOptionPane.showMessageDialog(null, (a.toString()),"ERROR: Exception", JOptionPane.ERROR_MESSAGE);
alive = false;
System.exit(1);
} // end method run -
Problem with threads and camera.
Hi everybody!
I've a problem with taking snapshot.
I would like to display a loading screen after it take snapshot ( sometimes i
have to wait few seconds after i took snapshot. Propably photo is being taken in time where i have to wait).
I was trying to use threads but i didn't succeed.
I made this code:
display.setCurrent(perform);
new Thread(new Runnable(){
public void run() {
while((!performing.isShown()) && (backgroundCamera.isShown())){
Thread.yield();
notifyAll();
}).start();
new Thread(new Runnable(){
public void run() {
try {
this.wait();
} catch(Exception e) {
exceptionHandler(e);
photo = camera.snapshot();
display.setCurrent(displayPhoto);
}).start();This code is sometimes showing performing screen but sometimes no.
I don't know why. In my opinion performing.isShown() method isn't working correctly.
Does anyone have some idea how to use threads here?Hi,
I've finally managed to work this fine.
The code:
Object o = new Object();
display.setCurrent(perform);
new Thread(new Runnable(){
public void run() {
while(!performing.isShown()){
Thread.yield();
synchronized(o) {
o.notify();
}).start();
new Thread(new Runnable(){
public void run() {
try {
synchronized(o) {
o.wait(1);
} catch(Exception e) {
exceptionHandler(e);
photo = camera.snapshot();
display.setCurrent(displayPhoto);
}).start(); -
We have a problem where our application stops responding after a few days of usage. Things will for fine for a day or two, and then pretty quickly threads will start getting hung up, usually in places where they are allocating memory
We are running WebLogic 8.1 SP2 on Sun JDK 1.4.2_04 on Solaris 8 using the alternate threading model and the -server hotspot vm. We are running pretty much the same code that we had no problems with under WebLogic 6.1 SP4 and Sun JDK 1.3.1.
A thread dump usually shows that some or all of our execute threads are in the state "waiting for monitor entry" even though they are not currently waiting on any java locks. Here is a sample thread from the thread dump (we have ~120 threads so I don't want to post the full dump).
=============================================================================================
"ExecuteThread: '8' for queue: 'itgCrmWarExecutionQueue'" daemon prio=5 tid=0x005941d0 nid=0x2c waiting for monitor entry [c807f000..c807fc28]
at java.lang.String.substring(String.java:1446)
at java.lang.String.substring(String.java:1411)
at weblogic.servlet.internal.ServletRequestImpl.getRelativeUri(ServletRequestImpl.java:1872)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3492)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2585)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
=============================================================================================
String.java line 1446 for this jdk allocates a new String object, and all the other threads in this state also are creating new objects or arrays, etc.
We've done a pstack on this process when it's in this state, and the threads that are in the "waiting for monitor entry" that look like they're allocating memory are all waiting on the same lwp_mutex_lock with some allocation method that's calling into the native TwoGenerationCollectorPolicy.mem_allocate_work (see pstack output below for the same thread as in the thread dump above)
=============================================================================================
----------------- lwp# 44 / thread# 44 --------------------
ff31f364 lwp_mutex_lock (e3d70)
fee92384 __1cNObjectMonitorGenter26MpnGThread__v_ (5000, 525c, 5000, 50dc, 4800, 4af0) + 2d8
fee324d4 __1cSObjectSynchronizerKfast_enter6FnGHandle_pnJBasicLock_pnGThread__v_ (c807f65c, c807f7d4, 5941d0, 0, 35d654, fee328ec) + 68
fee32954 __1cQinstanceRefKlassZacquire_pending_list_lock6FpnJBasicLock__v_ (c807f7d4, ff170000, d4680000, 4491d4, fee1bc2c,
0) + 78
fee3167c __1cPVM_GC_OperationNdoit_prologue6M_i_ (c807f7bc, 4400, ff170000, 2d2b8, 4a6268, c807fa18) + 38
fee2e0b0 __1cIVMThreadHexecute6FpnMVM_Operation__v_ (c807f7bc, 963a8, 0, 0, 1, 0) + 90
fed2c2a4 __1cbCTwoGenerationCollectorPolicyRmem_allocate_work6MIii_pnIHeapWord__ (962c0, ff1c29ec, ff1c297c, ff131a26, 4800, 4998) + 160
fed22940 __1cNinstanceKlassRallocate_instance6MpnGThread__pnPinstanceOopDesc__ (ee009020, 5941d0, 15ca581, 3647f0, 4a6268, c807f8c8) + 180
fed34928 __1cLOptoRuntimeFnew_C6FpnMklassOopDesc_pnKJavaThread__v_ (ee009018, 5941d0, 0, 0, 0, 0) + 28
fa435a58 ???????? (ee009018, e86de, 15ca4de, 50dc, 5941d0, c807f9c8)
fb36f9a4 ???????? (0, d412ccd8, ee046c28, ff170000, 0, 0)
fad8b278 ???????? (ee046c28, d6000c90, ee046530, 8, db8e8450, c807f9e8)
fad62abc ???????? (d412ccd8, ee046530, d6000c90, ee3bfa38, 8, c807fa18)
fa4b3c38 ???????? (c807fb9c, 0, f2134700, fa415e50, 8, c807faa8)
fa40010c ???????? (c807fc28, c807fe90, a, ee9e1e20, 4, c807fb40)
fed5d48c __1cJJavaCallsLcall_helper6FpnJJavaValue_pnMmethodHandle_pnRJavaCallArguments_pnGThread__v_ (c807fe88, c807fcf0, c807fda8, 5941d0, 5941d0, c807fd00) + 27c
fee4b784 __1cJJavaCallsMcall_virtual6FpnJJavaValue_nLKlassHandle_nMsymbolHandle_4pnRJavaCallArguments_pnGThread__v_ (ff170000, 594778, c807fd9c, c807fd98, c807fda8, 5941d0) + 164
fee5e8dc __1cJJavaCallsMcall_virtual6FpnJJavaValue_nGHandle_nLKlassHandle_nMsymbolHandle_5pnGThread__v_ (c807fe88, c807fe84, c807fe7c, c807fe74, c807fe6c, 5941d0) + 6c
fee6fc74 __1cMthread_entry6FpnKJavaThread_pnGThread__v_ (5941d0, 5941d0, 838588, 594778, 306d10, fee69254) + 128
fee6927c __1cKJavaThreadDrun6M_v_ (5941d0, 2c, 40, 0, 40, 0) + 284
fee6575c _start (5941d0, fa1a1600, 0, 0, 0, 0) + 134
ff3758c0 lwpstart (0, 0, 0, 0, 0, 0)
=============================================================================================
Also when it's having this problem, the "VM Thread" is always using a lot of processor time. We did a couple of pstacks today while it was having this problem, and this thread was stuck in the ONMethodSweeper.sweep for over 15 minutes when we finally killed the server.
From the thread dump:
"VM Thread" prio=5 tid=0x000e2d20 nid=0x2 runnable
From the first pstack:
=============================================================================================
----------------- lwp# 2 / thread# 2 --------------------
fed40c04 __1cXvirtual_call_RelocationIparse_ic6FrpnICodeBlob_rpC5rppnHoopDesc_pi_nNRelocIterator__ (42a2f4, fa5fa46d, ffffffff, fc4ffcb8, 42a2f4, 42a324) + 124
fed46318 __1cKCompiledIC2t5B6MpnKRelocation__v_ (42a2f0, fc4ffd24, fc4ffd4c, e802, 0, 6) + 38
fed90c38 __1cHnmethodVcleanup_inline_caches6M_v_ (fa5f7f88, fa608940, 1, 0, fa400000, 6) + 1ac
fede18b4 __1cONMethodSweeperFsweep6F_v_ (2cf38, 0, ffffffff, ff1cf1fc, ff1c66e8, fede1d44) + 1b0
fede1e6c __1cUSafepointSynchronizeFbegin6F_v_ (2cf38, ff1ba138, 5000, 50dc, 5000, 525c) + 248
feef1fd4 __1cIVMThreadEloop6M_v_ (4400, 4000, 4324, 4000, 42b0, 3800) + 3d4
feef1ae4 __1cIVMThreadDrun6M_v_ (e2d20, 2, 40, 0, 40, 0) + 8c
fee6575c _start (e2d20, ff270200, 0, 0, 0, 0) + 134
ff3758c0 lwpstart (0, 0, 0, 0, 0, 0)
=============================================================================================
Second pstack
=============================================================================================
----------------- lwp# 2 / thread# 2 --------------------
fed41180 __1cXvirtual_call_RelocationIparse_ic6FrpnICodeBlob_rpC5rppnHoopDesc_pi_nNRelocIterator__ (0, ff1b9664, ffffffff, fc4ffcb8, a6f2cc, fc4ffbd0) + 6a0
fed46318 __1cKCompiledIC2t5B6MpnKRelocation__v_ (a6f2c8, fc4ffd24, fc4ffd4c, e802, 0, 6) + 38
fed90c38 __1cHnmethodVcleanup_inline_caches6M_v_ (faded4c8, fadf2c80, 1, 0, fa400000, 6) + 1ac
fede18b4 __1cONMethodSweeperFsweep6F_v_ (2cf38, 0, ffffffff, ff1cf1fc, ff1c66e8, fede1d44) + 1b0
fede1e6c __1cUSafepointSynchronizeFbegin6F_v_ (2cf38, ff1ba138, 5000, 50dc, 5000, 525c) + 248
feef1fd4 __1cIVMThreadEloop6M_v_ (4400, 4000, 4324, 4000, 42b0, 3800) + 3d4
feef1ae4 __1cIVMThreadDrun6M_v_ (e2d20, 2, 40, 0, 40, 0) + 8c
fee6575c _start (e2d20, ff270200, 0, 0, 0, 0) + 134
ff3758c0 lwpstart (0, 0, 0, 0, 0, 0)
=============================================================================================
Has anyone ever seen anything like this? I'm trying to figure out if this is caused by something we're doing, or something relating to our environment and jvm options. Any ideas?Thanks for the reply - I'm testing our app with the +UseConcMarkSweepGC now in our test environment to make sure it doesn't cause any problems there. Unfortunately the only place we've had this problem is on the production server, so it's extra difficult debugging this.
We're using the following memory options:
-ms512m -mx512m -XX:NewSize=128m -XX:PermSize=192m -XX:MaxNewSize=128m -XX:MaxPermSize=192m -XX:SurvivorRatio=8and the following debugging options, as we've also been seeing OutOfMemoryErrors ( see http://forum.java.sun.com/thread.jsp?forum=37&thread=522354&tstart=45&trange=15 )
-verbosegc -XX:+PrintGCDetails -XX:+PrintGCTimeStamps -XX:+PrintHeapAtGCBTW, which c++filt version and options are you using? Our Solaris boxes only seem to have the GNU version installed. I was trying to run that on some of the other stack traces and wasn't getting anywhere, and didn't know if because it was GNU version wouldn't work on something compiled with the Sun compiler.
Thanks!
--Andy -
Problem with threads and ProgressMonitor
Dear Friends:
I have a little problem with a thread and a ProgressMonitor. I have a long time process that runs in a thread (the thread is in an separate class). The thread has a ProgressMonitor that works fine and shows the tasks progress.
But I need deactivate the main class(the main class is the user interface) until the thread ends.
I use something like this:
LongTask myTask=new LongTask();
myTask.start();
myTask.join();
Now, the main class waits for the task to end, but the progress monitor don`t works fine: it shows only the dialog but not the progress bar.
What's wrong?Is the dialog a modal dialog? This can block other UI updates.
In general, you should make sure that it isn't modal, and that your workThread has a fairly low priority so that the UI can do its updating
Maybe you are looking for
-
Hi there; For some reason I am unable to attach documents to a yahoo email from my macbook pro. I do not experience this problem on a nomal PC and i can even open attachments on the mac. However on trying to attach a document to an email it keeps com
-
Search files in current folder doesn't work
When I search my whole mac for e.g. "Danse Macabre" i get the results from all over the place, which is to be expected. So when I go into the folder I get a list of files including the one I was searching for. So far so good. While typing in a new se
-
I shot a clip with 50fps in 720/25p with Panasonic HVX200 and I have to conform the clip into 25fps so that FCP can read in slow motion. After make the conform and opened the file in FCP, all is ok, the clip appears to be 960x720 but the problem is i
-
Domain name and search engines
Hi There have been a few helpful postings about the importance of having text on your frontpage for crawlers etc to improve your search ranking. My question: how important is the domain name for search engines? Is it worth investing a dime or 2 on a
-
What are the attributes in Org Model used for? Thanks