Problem with ODI 11.1.1.5 on different server from Web-logic

Basically a problem is being faced with installing ODI 11.1.1.5 (Developer, Standalone and Java EE installations) on a different server from OBI 11.1.1.5. Basically, the thing that did cause this type of installation is that I cannot find a version of ODI to run a 64-bit machine like OBI 11.1.1.5. Hence, I installed the OBI on the 64 bit machine and shared the entire drive on which the home of the BI exist. The share process referenced all the folders contained inside the home with full permission given for read and change. This was being done to provide the bea home for the ODI Java EE installation which is required as a part of the installation process.
The problem is when I specify the middleware home location in the ODI installation with the given shared bea location an error appears saying: INST-07058: unexpected error occurred while validating Oracle home location.
I would be grateful to receive some advice on how to overcome this obstacle with regards to installting ODI on a 32-bit server where the weblogic AS is resided on a different machine running in 64-bit.
Help is very much appreciated...

Thank you for answer, well in the Logueo.jspx i have this code
<?xml version='1.0' encoding='UTF-8'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:h="http://java.sun.com/jsf/html"
xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
<jsp:directive.page contentType="text/html;charset=UTF-8"/>
<f:view>
<af:document id="d1" binding="#{backingBeanScope.backing_Logueo.d1}">
<af:form id="f1" binding="#{backingBeanScope.backing_Logueo.f1}">
<af:outputLabel value="outputLabel1"
binding="#{backingBeanScope.backing_Logueo.ol1}"
id="ol1"/>
</af:form>
</af:document>
</f:view>
<!--oracle-jdev-comment:auto-binding-backing-bean-name:backing_Logueo-->
</jsp:root>
this not is the problem, because is the project number 3 made on fedora and this don't function fine...... thank you for answer...!!!

Similar Messages

  • ODI 11.1.1.5 on different server from OBI 11.1.1.5

    I am basically facing a problem with installing ODI 11.1.1.5 (Developer, Standalone and Java EE installations) on a different server from OBI 11.1.1.5. Basically, the thing that did cause this type of installation is that I cannot find a version of ODI to run a 64-bit machine like OBI 11.1.1.5. Hence, I installed the OBI on the 64 bit machine and shared the entire drive on which the home of the BI exist. The share process referenced all the folders contained inside the home with full permission given for read and change. This was being done to provide the bea home for the ODI Java EE installation which is required as a part of the installation process.
    The problem is when I specify the middleware home location in the ODI installation with the given shared bea location an error appears saying: INST-07058: unexpected error occurred while validating Oracle home location.
    I would be grateful to receive some advice on how to overcome this obstacle with regards to installting ODI on a 32-bit server where the weblogic AS is resided on a different machine running in 64-bit.
    Help is very much appreciated...

    EPM 11.1.2.1 is certified with 10.3.5.6+
    To be honest if you are using 10.3.5.x then it worth patching the latest patch releases as many bugs have been addressed.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Anyone having problems with Elements organiser 13 when try to import photos from Mac photos which was an upgrade from Iphotos on 9th April 2015. Before when I was using Iphotos all was ok...

    Anyone having problems with Elements organiser 13 when try to import photos from Mac photos which was an upgrade from Iphotos on 9th April 2015. Before when I was using Iphotos all was ok...

    hi I have been trying to do this, but PE13 comes up with a fail message saying that file types are not supported, am only trying to import jpeg files so can't understand this.  So far have been unable to use PE13 at all, any ideas anyone please!

  • Problem with Xsan 2.1.1 and Mac Os server 10.5.6

    Hi,
    We have a big problem with xsan 2.1.1 and Mac Os server 10.5.6.
    - We have one server, is a Open Directory Master, and also is a metadata controller of xsan2. The Volumes of xsan2 are shares via afp, and the clients (moreless 50) connect with server via afp.
    - We have some problems, one of them is:
    odm fsm [341]: XSAN FSS 'VolDocs [0] ' : Invalid inode lookup: 0x7f80000000007e0 markers 0x0/0x0 nextiel 0x0
    This message is always in the log. We stop the volume, and start cvfsck -wv, but dont have anything, how fix it??
    - Another problem is with AFP service, suddenly the service stop, and the error is :
    mds [58] (error) Server: Mach error queueing checkin to peer manager: (ipc /send) invalid port right.
    -What of the meaning of (ipc/send) invalid port right??.
    And the last error is:
    -com.appelAppleFileServer [347] MDSChannelPeerRequest: (ipc/rcv) timed out.
    Need Help please!.

    My configuration:
    - Master Directory:
    Hardware Configuration:
    Model: Xserve
    Processor: 2x2,8 Ghz Quad-Core Intel Xeon
    Memory 8 Gb
    Disk: 70,04 Tb
    Software:
    Kernel Version: 9.6.0
    System Version: Mac OS X Server 10.5.6
    Xsan 2.1.1
    Services: AFP, DNS, Open Directory RADIUS
    Status: connected Users: 37
    This server is the open directory Master and metadata controller of xsan2, but we have another server that is open directory replica and metadata controller of xsan2. The fisrt server have too many errors with afp, the service stop and the server is dead, and you must restart via terminal with the command sudo reboot. I dont know what happen, do you help me please?

  • I face a problem with my macbook air or i think it's from the lion OS cause i didn't happen with snow leopard OS the massage says ( you can't open the application ....... because powerPC applications are no longer supported) any advice ??

    I face a problem with my macbook air or i think it's from the lion OS cause i didn't happen with snow leopard OS the massage says ( you can't open the application ....... because powerPC applications are no longer supported). any advice ??

    Mac OS X Lion has dropped support for Rosetta, the feature that allowed you to run PowerPC apps on previous OS X systems. Check if you can find a newer version of the app you are trying to run that supports Intel processors.
    What application are you trying to run? Maybe I can help you find a version that runs on Lion.

  • Are there any problems with a "required Extended Protection" / "Always On" / "Livelink Server" combination?

    Hello,
    we have a Livelink  Server database running with two replicas on two nodes as Always On Group, both instances running extended protection in "allowed" mode.
    Our company security policy demands setting the extended protection to "required".
    Are there any known problems with a "required Extended Protection" / "Always On" / "Livelink Server" combination?
    Environment:
    OS: Windows Server 2008 R2 Enterprise X64 SP1
    DB: SQL Server 2012 (11.0.5556.0)
    Thx & BR
    Achim

    Hi Achim,
    According to my knowledge, there are no known problems with a "required Extended Protection" / "Always On" / "Livelink Server" combination.
    Extended Protection helps to prevent an authentication relay attack by using service binding and channel binding. We need to note that when Extended Protection is set to
    Required, only connections from protected applications on protected operating systems are accepted. This setting is the most secure but connections from operating systems or applications that do not support Extended Protection will not be able
    to connect to SQL Server. For more details, please review the following article.
    Connect to the Database Engine Using Extended Protection
    https://msdn.microsoft.com/en-us/library/ff487261(v=sql.110).aspx
    Thanks,
    Lydia Zhang
    If you have any feedback on our support, please click
    here.
    Lydia Zhang
    TechNet Community Support

  • I have some problems with my iPhone. Can i change my iphone from USA (ME495LL/A) in Germany? Warranty is ok till october 2014

    I have some problems with my iPhone. Can i change my iphone from USA (ME495LL/A) in Germany? Warranty is ok till october 2014

    No you cannot. The iPhone warranty is only good in the country of purchase. You would need to bring it back to the US, or send it to someone that could take it to an Apple store in the US. Apple will not accept international shipments.

  • Problem with errorPage in page directive tag while proxying request from iPlanet to WebLogic

              Hi,
              We are using iPlanet 4.0 as the webserver and WebLogic 5.1 as the application server on different solaris machines. We have put our JSPs in the weblogic application server and proxy the requests from iplanet to weblogic.
              We are facing a problem with the errorPage in the 'Page Directive' tag of the JSP. We have given xxx.jsp as an 'errorpage' parameter in the page directive tag. If we directly access the JSP from the WebLogic, and there is an system error, the error page specified in the JSP is getting displayed. But if we access the JSP from iPlanet and there is an system error, instead of displaying the error page, iPlanet is asking whether we want to download the file. If we say yes it downloads the actual JSP code itself. We have defined the mime types in obj.conf file as well as mime.types for the iPlanet.
              If anyone knows how this can be solved, it would be of great help
              Regards,
              Krish
              

    How did you configure the obj.conf file? proxy by mime type or ppath? It
              seems errorPage.jsp was not proxyed and treated as a unknown mime type.
              Krishnaraja <[email protected]> wrote in message
              news:3a372d79$[email protected]..
              >
              > Hi,
              >
              > We are using iPlanet 4.0 as the webserver and WebLogic 5.1 as the
              application server on different solaris machines. We have put our JSPs in
              the weblogic application server and proxy the requests from iplanet to
              weblogic.
              >
              > We are facing a problem with the errorPage in the 'Page Directive' tag of
              the JSP. We have given xxx.jsp as an 'errorpage' parameter in the page
              directive tag. If we directly access the JSP from the WebLogic, and there is
              an system error, the error page specified in the JSP is getting displayed.
              But if we access the JSP from iPlanet and there is an system error, instead
              of displaying the error page, iPlanet is asking whether we want to download
              the file. If we say yes it downloads the actual JSP code itself. We have
              defined the mime types in obj.conf file as well as mime.types for the
              iPlanet.
              >
              > If anyone knows how this can be solved, it would be of great help
              >
              > Regards,
              > Krish
              

  • Problem with iTunes purchased track.  I purchased an album from the store and downloaded.  I contacted support as one track was defective and had this one track setup to re-download, which was successful.

    I purchased an album with 11 tracks from the Store.  When the download was complete, I edited the name to make it easier for me to find. I then synced my iPod and iPad with the new album.  However I found that one of the tracks was defective and after writing to the support community, a second download was setup and this fixed the bad track.  I was surprised that when the track downloaded, it went to the track with the new name.  However it works perfectly on my computer.  For some reason, the iPod and iPad have synced a few times but the track for this album on these is the original track with the defect and this has not fixed, though there have been multiple times that it has synced. The laptop with its corrected track works fine.
    The message from support told me to be sure that the software on my laptop was the current version and I did correct this before getting that corrected download.  However I notice that my iPod says that it has the latest version and won't check for an update until 2/24.
    Can you help me figure this out.  I thought if I could delete this track off the iPod and iPad that it would sync the correct version, but I can't see how to delete these.
    Thanks for any help you can offer.

    Assuming you are in a region where you are allowed to redownload your past music purchases, delete the problem tracks from your iTunes library, close and then reopen iTunes, go to the iTunes Store home page, click the Purchased link from the Quick Links section in the right-hand column, then select Music and Not on this computer. You should find download links for your tracks there.
    While downloading select Downloads in the left-hand column and make sure Allow Simultaneous Downloads is unticked.
    If the problem persists, or that facility is not yet available in your region, contact the iTunes Store support staff through the "Report a problem" links in your account history, or via Contact Support.
    See also:
    HT5085 - iTunes in the Cloud and iTunes Match Availability
    HT2519 - Downloading past purchases from the App Store, iBookstore, and iTunes Store
    tt2

  • I've got a mac pro problem with the starting up, but also a red light on the logic board solidly on. Its not among the diagnostic led. It's located near the BT adapter and the front fans. Also the fans run loud also. any solutions?

    Hi
    I've got a mac pro late 2006, and i am having problem with it for quite a while now. the problem i am facing is the start up process, and the red light on the logic board. Earlier I've got the two led on the diagnostic leds 5 and 6 turned on without the diagnostic button being pressed, and i think those are related to the processors overtemp. I've managed to solve that by, removing the processors and re applying the thermal compound on the heatsink. what i have left now with is the red light on  the logic board at the time i plugged in the power. At the same time when this light come on, the power indicator at the front panel come on as well. i am not sure what is this light relates to. We've replace the power supply too, and gone through the SMC reset but seems no help.
    Any idea on the problem? I am desperate about it, and i will be greatful if anyone can help..
    thanks and hope for your best solutions
    Kari

    I can't help directly with your problem but you might check here http://tim.id.au/laptops/apple/macpro/ for a service manual which could answer your question.

  • Problem with exporting a report to excel vial citrix server

    Hi,
    We are encountering a problem with exporting a report to excel through ALV local file icon.A spread sheet is downloading only one row (From header) instead of many rows from the ALV output .  
    Above is working fine for the GUI installed on my PC, but not throgh the Citrix server.
    Can any body have idea on above mentined?
    Regards,
    SK.

    I understand that you're trying to download the file to a local computer  through Citrix. In this case you need autorizations in Citrix for your user ( CItrix user)

  • Problems with Late 2011 MBP (catalog corrupt, won't boot from USB/CD)

    Hello,
    I have had some problems with my Late 2011 MBP running OSX 10.8.x (latest update)
    I was using Safari when suddenly my screen froze. It has happened a couple of times before but it usually is either: 1.) a black screen for 5 seconds while nothing works responds and then it continues work like nothing happened, or 2.) just a freeze for a moment which goes away within a few seconds. I have visited the official service and they found nothing wrong with my laptop and said that it may have been just random occurrence. This time it froze and as I waited the fans went crazy and had no other option but to shut down from the power button. Later, when I wanted to boot up, it gets to the Apple logo, the circle spins and the small bar below appears and after a second or two, it disappears and then the computer shuts down. I went to recovery mode and used disk utility to verify and repair the problem (which only works to find out the problem, not to fix it, thanks anyway apple) Heres what it showed:
    Verifying volume “nihil”
    Checking file systemChecking Journaled HFS Plus volume.
    Checking extents overflow file.
    Checking catalog file.
    Keys out of order
    Invalid extent entry
    Incorrect size for file .mdworker_2013-07-21-081г41_эartin-RichaѲds-эacBѯok-ѐro.crash.plist
    (It should be 0 instead of 4398046511104)
    Illegal name
    Invalid extent entry
    Invalid extent entry
    Incorrect size for file .mdworker_2013-07-22-б20303_MartiѮ-RiѣharѤs-MѡcBoѯk-Pro.crash.plist
    (It should be 0 instead of 67108864)
    File has incorrect number of links (id = 60851670)
    (It should be 1 instead of 67108865)
    Invalid extent entry
    Invalid extent entry
    Incorrect block count for file .mdworker_2013-08-04-145002_Martin-Richards-MacBook-Pro.crash.plist
    (It should be 0 instead of 1024)
    Invalid extent entry
    Invalid extent entry
    Incorrect size for file .opendirectoryd_201г-08-04-б516а5_MѡrtiѮ-Riѣhards-MacBook-Pro.crash.plist
    (It should be 0 instead of 67108864)
    File has incorrect number of links (id = 66286495)
    (It should be 1 instead of 67108865)
    Invalid catalog record type
    The volume nihil could not be verified completely.
    Error: This disk needs to be repaired. Click Repair Disk.
    Verify and Repair volume “nihil”
    Checking file systemChecking Journaled HFS Plus volume.
    Checking extents overflow file.
    Checking catalog file.
    Keys out of order
    Invalid extent entry
    Incorrect size for file .mdworker_2013-07-21-081г41_эartin-RichaѲds-эacBѯok-ѐro.crash.plist
    (It should be 0 instead of 4398046511104)
    Illegal name
    Invalid extent entry
    Invalid extent entry
    Incorrect size for file .mdworker_2013-07-22-б20303_MartiѮ-RiѣharѤs-MѡcBoѯk-Pro.crash.plist
    (It should be 0 instead of 67108864)
    File has incorrect number of links (id = 60851670)
    (It should be 1 instead of 67108865)
    Invalid extent entry
    Invalid extent entry
    Incorrect block count for file .mdworker_2013-08-04-145002_Martin-Richards-MacBook-Pro.crash.plist
    (It should be 0 instead of 1024)
    Invalid extent entry
    Invalid extent entry
    Incorrect size for file .opendirectoryd_201г-08-04-б516а5_MѡrtiѮ-Riѣhards-MacBook-Pro.crash.plist
    (It should be 0 instead of 67108864)
    File has incorrect number of links (id = 66286495)
    (It should be 1 instead of 67108865)
    Invalid catalog record type
    The volume nihil could not be verified completely.
    Volume repair complete.Updating boot support partitions for the volume as required.Error: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
    I tried to boot DiskWarrior from a USB and a CD, after pushing enter in the bootable device's screen, I get a continuous loop of 3 beeps and I can't boot from either of the mediums.
    I also tried the Single-user mode (Command-s when booting) and the /sbin/fsck -fy said that my HD is not completely verifiable. Also, 3/4 of the files mentioned in disk utility are also mentioned in this process, with errors as forrows: keys out of order, invalid index key, invalid extent entries (7 times), incorrect block counts, number of links and incorrect sizes for the foretold files and invalid catalog record type.
    The reason why I'm not doing a clean install is that the last few days I've been in the process of deleting unnecessary items on my laptop so I could make a back-up (as for some reason, Time Machine is awfully slow and a new 600 gb backup would take and enormous amount of time, but that's a problem for another day) and as I had not yet reached the backing up part, my data is locked on this (possibly) corrupt HD. How should I advance and what steps should I take?
    My first and most important mission would be to get back into my OS to make a back-up. Then I'd deal with the "not being able to boot form USB nor CD" and the TM problem.
    Thank you all in advance,
    Martin

    Before you even start, consider that there may be no Windows 7 driver support for some of the hardware in your laptop. You won't know which hardware devices and functions are unsupported until you find out the hard way. In some cases, a driver conflict could cripple your computer.
    Like most OEMS, Toshiba pre-installs Windows 8 to boot with EFI on a GPT hard drive. Your Windows 7 install disc, on the other hand, most likely boots with a BIOS from an MBR. Therefore, your Windows 7 disc will not boot your computer.
    You would need to start by performing a low-level format of your hard drive. This completely erases the disc and its metadata. Then you could boot from your Windows installation disc and try to install Windows 7. How successful you will be depends on driver support.
    All things considered, you should stay with Windows 8. Next time, more research before you buy.

  • HT4946 I want to sync my iPad with an older backup, not the old created when I plug mt device in.  Following a problem with my iPad I have lost all my data from a game app and I am trying to retrieve it

    Following a problem with my IPad and restoring it, I have lost the data in one of my game Apps ... I can see in ITunes/ pref my iPad back ups and want to try to sync with an older back up to get the data back.  So how can I sync with an oldera back up?

    In that same window - the one where you see your backups - click on the box at the bottom that say -Prevent iPods, iPhones and iPads form syncing automatically. Then click OK and quit iTunes.
    Connect your iPad to the computer and launch iTunes. Right click on the iPad name on the left side under the devices heading and select - Restore from backup. A window will pop up from which you can select any of the backups that you have for the iPad. Select the backup that you want to restore from and then go agreed and restore the iPad. Sync with iTunes when you are done.
    Remember that when you restore from a backup - you restore everything in that backup to the iPad. You cannot selectively restore content. It is all or none.

  • Dear apple community, now I have some problem with iPad(The New iPad 4G). 1st, start from I got it, it really difficult charge. 2nd, very and very hot with 3G or Internet using. And more, some problem with wifi.

    From Me, THE MAHACHAK to Apple Company
        I think, the apple company are producing and sell only their own country or their ownself, not over the world. And in the other hand, I want to ask Apple Company about their market policy as marketing strategy or size of marketing. How about it? How did you think? Only your own or for world. I like one word as MARKETING IS WATER. Where can't water go? Such as my small country have a lot of people are using apple products a lot as iPhone, iPad, iPod and apple laptop. Cambodia is my small country with much rich families. They can use a good product or high class product, high tenology. Most of products is Apple. But they always have many bad comments and bad problem with Apple products. WHY? The problems such as Lock code, cann't conected with other, hard to find or buy, no Safety, no warranty world wide, wifi, charger, hot during 3G conected, ...etc. hope, these my own idea is looked for all the Apple customers around the world. Please, text me back. Waiting back.
    Thanks and Regard

    Apple Discussions is a user to user forum, so your post is not read by any Apple employee.
     Cheers, Tom

  • Problems with scan jobs Forefront protection 2010 for exchange server administrator console

    Dears,
    I have the following problem with the
    CAS server:
    How do I fix it?
    thanks for your reply
    Edwin Duran Ospina

    Hi,
    FPE will now post a warning if any items are present in the Undeliverable archive folder. You could remove the stuck email from "%Program Files (x86)%\ Microsoft Forefront Protection for Exchange Server\Data\Archive\Undeliverable".
    For more information: http://support.microsoft.com/kb/2420647
    Best Regards,
    Joyce
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

Maybe you are looking for