Problem with Print Window in Landscape
Hi,
I am using "Print Window" menu option of LabVIEW to print Visible area of Front Panel. When I select printer setting for Portrait printing, the print is fine and same as visible on screen. However when I change printer setting to Landscape, the lower portion of screen(on print out) is cut. Also screen is displaced on print. This abnormal behaviour also changes if I change margins but it never vanishes.
I have tried changing "Tools >> Options >> Printing" to Bitmap from LabVIEW. This corrects the problem but now the print resolution is extremely poor.
I am using screen resolution of 1024x768 on LCD monitor. The screenshots of two situations are attached. Please help me getting out of this trouble. I am using LabVIEW 8.6 initially installed in Evaluation mode and now working in Base Licensed mode. However the results are same.
Thanks & Regards
Mnuet
Attachments:
Portrait Print of Front Panel.jpg 71 KB
Landscape Print of Front Panel.jpg 54 KB
I am also having a similar problem printing a VI. I'd like to print out some barcodes but some of them are printing with poor resolution. It prints out a few of the control using full resolution true type, and the others are in screen resolution. I'm using LV8.5 but I think I've seen this problem in other new versions.
A printout in pdf is attached.
Thanks,
Bruce
Attachments:
Barcodes.pdf 213 KB
Similar Messages
-
HP 4622 All in One Printer: Problem with Printer or Ink System
Problem with Printer or Ink System Error OXC19a0027.
charleshia wrote:
Thanks so much for replying to my post. I tried the fist suggestions and they did not work. So, I attempted to move on Dow to the cleaning of my printer. I am the the first to admit that I'm not the genius when it come to electronics buys, my printer do not seem to have what is described in the photos. I'd like to upload a photo of my ink cartage but do not know how.
Charleshia, you can upload a photo here to reply. Click Reply, then on the window you'll see the image below..
click the one which has the red box, it's where you insert the photo
Going back on your issue.. the basic step would be.. take out the inks then close the door... what error message you got? If it's saying "Missing Ink Cartridge" just hit OK. Unplug the power cable at back of the printer, plug it back in.. Clean the copper contacts on the ink cartridges using a lint free cloth then reinstall them. Let me know if it resolved it or not.. I can only give basic troubleshooting here -
Hi All,
I'm developing a web application written in J2EE that uses Java Reporting Component (JRC) to display crystal reports from some filters recovered from a jsp and passed to a report .rpt previously designed and invoked just at runtime.
I have a problem with printing a PDF:
I want, after entering the filters in a jsp, to print a report in PDF format (WORD) without opening it
with Adobe Reader (Microsoft Word). The class of API JRC used for export is ReportExportControl.
Can anyone help me?
I wish a great day to You all.Hi Ted Ueda,
sorry for the delay of my answer.
I understand very well the problems related to security.
With the following code that I used to produce a report (PDF) at runtime,
is the PDF created on the server and then sent to the client, or is it directly created on the client as PDF
from RTF previously realized?
ReportExportControl exportControl = new ReportExportControl();
String report = report path;
ReportClientDocument reportClientDoc = new ReportClientDocument();
reportClientDoc.open(report, OpenReportOptions._openAsReadOnly);
Object reportSource = null;
reportSource = reportClientDoc.getReportSource();
//The method setConnectionProperties() stores all the connection parameters in the collection
//ConnectioInfos
ConnectionInfos connInfos = setConnectionProperties(request, reportClientDoc);
exportControl.setEnableLogonPrompt(false);
exportControl.setEnableParameterPrompt(false);
exportControl.setReportSource(reportSource);
exportControl.setDatabaseLogonInfos(connInfos);
//Single method to pass parameters to Crystal Reports. Using classes ParameterFieldController and
//ParameterFieldDiscreteValue
setReportParametersValue(reportClientDoc, reportParameters, subReportParameters);
ExportOptions exportOptions = new ExportOptions();
//Set the export format (PDF)
exportOptions.setExportFormatType(ReportExportFormat.PDF);
PDFExportFormatOptions PDFExpOpts = new PDFExportFormatOptions();
exportOptions.setFormatOptions(PDFExpOpts);
exportControl.setExportOptions(exportOptions);
exportControl.setExportAsAttachment(true);
try {
exportControl.getHtmlContent(request, response, getServletConfig().getServletContext());
} catch (ReportSDKExceptionBase e) {
throw new ApplicationException("error code", ": error message"); }
As, however, I predicted in my previous message about the direct printing on the client,
I read about ActiveX, but I don't know how to use them.
I read this information in the 'Crystal Reports for Eclipse Developer Guide' about "printMode" attribute:
"In ActiveX print mode, an ActiveX control is downloaded to the client machine and the report is send directly to the printer...."
The ActiveX alternative is a java applet that runs on the client and takes the pdf from the server and prints directly onto the clients through the commands that I used in the DOS command line:
1) AcroRd32.exe /p /h FILENAME
where
/p = print
/h = hide window
to print the report and
2) tkill AcroRd32
to close Adobe Reader, because it doesn't end automatically after printing and the command /h is used just to minimize the process.
I hope you can give me advice because I need to print directly on the client. Thank you -
Problem with printing pdf file
hello,
lately i have problem with printing pdf file:
i click on the print button and the respod is very slow
it takes more than a minute till the print window apears.
i tryied to install version X but it's the same, the problem exist only when printing via adobe reader,
other programs i'd working much faster.
please advice,
thank youNo, it is not set to overprint. Also, I have to add that the printing results were not consistent. Sometimes it covered and sometimes it did not.
-
Problems with printer and network connectivity
So I've been using an HP B110a photosmart wireless e-all-in-one printer that I got with my macbook pro and at the start, everything worked perfectly in terms of wireless printing, ePrint, and AirPrint. But recently, when I try to print wirelessly, it says the printer is not connected and I also can't find it on the list of nearby printers on the 'add printer' window. I also had problems with printing via ePrint but those have cleared up (I don't know what was wrong but it's fine now). Printing with AirPrint on my iPod touch has stopped working as well because the printer doesn't show up when I search for nearby printers.
Here's what I've checked/tried so far:
All the wireless services are enabled on my printer and my mac
I've reset the printing system on my mac, printer settings to factory defaults
Restarted mac/printer/iPod
Restarted router
Reinstalled HP printing software that came with the printer
All software is up to date
Wireless printing on another windows computer does work
Setting up wireless printing using the HP install disc doesn't work
Trying to add a new printer using the HP software disc that came with the printer is unsuccessful in locating the printer as well.
Printing over USB is problem-free
When I tried restarting the printer/router, I could see the printer for just a few minutes in the 'add printer' list but then it would disappear from the list and the printer would be 'not connected' so I can't print wirelessly.
More info
MacBook Pro (13 inch, early 2011)
Mac OS X Lion (10.7.2)
HP Photosmart e-All-in-One B110a
Router is a Huawei HG556a that I got from Vodafone NZ
Thanks in advance!http://support.apple.com/kb/DL907
-
Problem with printing true colors
Had PSE7 and colors printed true and beautiful. Upgraded to PSE10 and all of a sudden colors printed muddy and dull with purplish overcast. Took printer in for service but problem persisted. Upgraded to PSE11 and once again colors were printing true and beautiful for over a year. Printed a card about 5 days ago using PSE11 - beautiful. Printed a card yesterday using PSE11 and colors muddy and dull with purplish overtones. Installed PSE13 and colors printing dull, muddy with purplish overcast.. I feel it is a problem somewhere in settings of PSE, but can't figure out where. I don't think it is a problem with printer. Both printer and PSE set to Adobe RGB. Color control set to optimize for printer. Using PC with Windows 7, 64 bit. Printer is Epson stylus photo 1400. Thanks for any help, Merrie
See if this helps:
http://helpx.adobe.com/photoshop-elements/kb/color-management-settings-best-print.html -
I am trying to install iTunes on my PC (using Windows 8.1), but I get this error: "There is a problem with this Windows Installer package. A DLL required for this install to complete could not be run. Contact your support personnel or package vendor." The iTunes file (64-bit) I am trying to install, is named "iTunes64Setup.exe". What seems to be the problem? Help!
Hey madnest,
Thanks for the question. After reviewing your post, it sounds like you are having difficulty installing iTunes in Windows. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
Issues installing iTunes or QuickTime for Windows
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
I keep getting the following error message when I try to update my itunes, "There is a problem with this windows installer package. Aprogram run as part of the set up did not finish as expected. Contact your support personnel or package vendor."
Yes, I had found a similar solution also. I'm running XP Pro, SP3. I went Control Panels/ Add-Remove programmes/apple software update/ change/ repair. Then run the 10.5 exe.
While the programme updated from version 8 of iTunes, my new iTunes is now a mess. Not all of my music was in the same folder previously but it all showed up on iTunes. Now many albums have been left out, some have only a few tracks and some have two copies of some tracks as well as having other tracks missing. I haven't begun to work on that. -
I have Wondows Vista... I tried to upgrade to Itunes 10.5, and received an error orginially stating that I was trying to install a version older than the one I had. I uninstalled all of itunes, and now I'm getting the error message "there is a problem with this windows installer package. Aprogram required for this install to complete could not be run.
Help! I have an IPhone, and I would like to get my Itunes upgraded so I can download the new Iphone software...
Thanks!I have been in touch with Apple support in reference to my problem. We went through every solution available, and found no fix. The tech then suggested I contact Microsoft concerning this issue. I thought that suggestion was just to get me pointed somewhere but Apple. Boy was I wrong!! I contacted Microsoft, and was directed to a free download called Microsoft Fix. This program fixed something in the regisitor, and wala everything was fixed!! I now have I-Cloud and I-Tunes loaded and working well. So, if you can't install Apple Software and are running Window 7 you might give Microsoft Fix a try, it fixed my problem.....
-
I am trying to install itunes 10.5, but during the download I get the following message, "There is a problem with this Window Installer Package. A program required for this install to complete could not be run. Contact your support personanal or package vendor." If this is my personal computer and was able to upgrade to the previous version (pre 10.5), why not now? What is my "package vendor"? And what is it I need to do to fix this? The message is unclear. Unfortunately, I deleted my itunes program, thinking that in doing so, 10.5 would finally load. Now I have no itunes on my computer and unable to sync my iphone. Help!
Thanks - RickHi Rick,
by "repair" I mean I went to the control panel, option - programs and features, and in the list of all my installed programs I selected "Apple Software Update". On top of the screen you find the options Uinstall, Change and Repair. I clicked the repair button and that did the trick. After the repair I could uninstall the program. I also uninstalled iTunes, Apple Application Support, Apple Mobile Device Support en Bonjour, thus all Apple programs. Then I installed iTunes 10.5 again and everything went fine.
Success,
Peter -
when trying to setup itunes on my pc i get the following message: there is a problem with this Windows installer package. A program required for this install to complete could not be run. How could I solve this problem?
Repair your Apple software update.
Go to START/ALL PROGRAMS/Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install
If you don't find ASU, go to Control Panel:
START/CONTROL PANEL/Programs n Features/highlight ASU and click REPAIR, -
When Upgrading on my laptop from iTunes 10.2.11 to 10.5.0 the message I get is: "There is a problem with this Windows Installer Package. Aprogram run as part of the setup did not finish as expected. Contact your support personnel or pacakge vendor.
After reading all these posts, one by one did not resolve my problem until I got the very end. Regardless of what step would resolve your problem, these are the steps I would recomment to everyone for a what seems to be a safe and fool-proof upgrade to iTunes 10.5.
1. Stand alone upgrade to the latest Quicktime version
2. Go to control panel and "change" then select repair to the following applications in the order specified by the post on Oct 27. (Notice I skipped Quicktime because it had been upgrade manually,and Bonjour did not have a "repair" option)
iTunes; Apple Software Update: Mobile Device Support; Apple Applications Support
Some of these applications may not appear if they do not apply to your configuration (no iPhone, or no iPad, or other apple devices).
Once all updated, I did not need to restart nor launch any applications, I simply went straight into the 10.5 upgrade, and where it normally got stuck, this time the installation continued for a while longer until it completed successfully.
Great work everyone who contributed! Thank you very much! -
Hi,
This is how it all started. When the new update for iTunes 11 came out, I tried to update it. After I had updated it I found nothing had changed. So i tried rebooting my computer and everything and found that still nothing had changed. So I tried uninstalling it. After that I tried to re-install it, but it came up with the
"There is a problem with this Windows Installer package ..." message. So I looked around the internet and found a website that told me to uninstall all Apple products. So i did that. When i tried to uninstall Apple Software Update, it came up with the 'problem with windows' message again. So I used Revo to uninstall it. So I rebooted and tried to install it again. It installed Bonjour and all of the other programs but stopped halfway and gave me the 'proplem with windows' message again. I've looked around and most of the solutions have been to try and repair Apple Software Update, but the problem is, I've already deleted it. So can someone PLEASSEEEE help me fix this problem! (Sorry for droning on)http://support.microsoft.com/mats/Program_Install_and_Uninstall try this an see if it fixes it.
-
Not able to access Itunes store anymore. Just quit working for no reason. I've tried deleting Itunes and related components from the Control Panel, but when I try to remove Apple Software Update, I get a message that states "There is a problem with this Windows installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor". Not sure what this message means. Am I suppose to contact Apple ? What is meant by package vendor ?
Apparently it's an itunes issue. I just tried to update and got the same issue. Called att to activate my iphone 4s and they say they can do the swap but apple is telling them itunes is down atm. So will have to wait
-
5, it says, "There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor." I have Windows XP and I need help.
After reading all these posts, one by one did not resolve my problem until I got the very end. Regardless of what step would resolve your problem, these are the steps I would recomment to everyone for a what seems to be a safe and fool-proof upgrade to iTunes 10.5.
1. Stand alone upgrade to the latest Quicktime version
2. Go to control panel and "change" then select repair to the following applications in the order specified by the post on Oct 27. (Notice I skipped Quicktime because it had been upgrade manually,and Bonjour did not have a "repair" option)
iTunes; Apple Software Update: Mobile Device Support; Apple Applications Support
Some of these applications may not appear if they do not apply to your configuration (no iPhone, or no iPad, or other apple devices).
Once all updated, I did not need to restart nor launch any applications, I simply went straight into the 10.5 upgrade, and where it normally got stuck, this time the installation continued for a while longer until it completed successfully.
Great work everyone who contributed! Thank you very much!
Maybe you are looking for
-
Sales order stock should post in unrestrcited use stock
Hi We have MTO and MTS both scenario. Now, for SFG materials we produce through CIR in MD81. Hence, the planned order -> process orders are generated after MRP run has reference of sales order. Our all SFG products are Auto Goods receipt through COR6
-
How do i correct the phone number in iMessage on iPad air
how do i correct the phone number in iMessage on iPad air
-
I have an array of integer values. If my program asks the user to input a number and they input a number that is not in the array, how would I be able to say which values in the array would add up to that number? for example: my array has values of 1
-
BUG: F3 (find next) is disabled?
I'm really not sure whats going on but it seems like recently my F3 button stopped working for Find Next, really annoying... but I thought maybe the shortcut key was changed or something like that so I goto the "Search" mainmenu item and its listed t
-
Need you help! Our master catalog is locked and I'm trying to unlock it. As I read some of the postings in this thread, I checked /CCM/D_CTLG_REG and I see two versions of our master catalog. However, both versions are inactive (there's no x next to