Problem with REUSE_ALV_LIST_DISPLAY when report is run in background

Hi All,
I had a problem with my report I am using the REUSE_ALV_LIST_DISPLAY when I run the report in foreground the report shows the output correctly but when I run it in background the report output is broken I mean some text are cut and place under each other. Please advise solution.
Regards,
Ekit

Hello Ekit
Please, check notes below to correct it:
- 1174095 ALV print: Collective correction PRI_PARAMS_SET4
- 1039655 ALV total: Subtotals disappear from printout II
Only apply if they are relevant for your release. And always test thoroughly.
regards
Ray

Similar Messages

  • Potential problems with using a report to run a commit in a separate LUW.

    I am working with a classic Badi within a transaction where I wanted to commit some information to a database before the commit that occurs at the end of the transaction.
    Putting a commit point directly inside the BADI caused problems with cursors that were open inside the transaction, so I researched some and discovered that Report Programs can run in a separate database Logical Unit of Work (LUW).
    I coded my BADI to call a report which does some database work based on input parameters, and then commits this work to the database before returning control back to the calling BADI function.
    Does anyone know of any potential problems from doing this?  It seems like a good way to get around restrictions on the use of commit points inside transactions, but I'm not sure if there could be potential undesired effects from doing this.
    Has anyone tried this before?

    Hi Clay,
    Yes I did it too. We faced some issues with commit when using fm HR_INFOTYPE_OPERATION . We had to enclose it in separate report which only then let us do physical change in DB.
    What is to be noticed here as well is (according to SAP) that DB commit is triggered each time work process is released which happens when:
    - system shows dialog message
    - RFC call is executed
    - new transaction is called
    The above however didn't work for me in couple cases, but using separate SAP LUW solves the problem (as you already read). This happens each time:
    - new report is called (SUBMIT ...),
    - new transaction is called (CALL TRANSACTION ...)
    - new asynchoronus RFC call is executed (CALL FUNCTION...STARTING NEW TASK).
    This approach works fine for cases I met and had to overcome with such solution. So far we didn't face any issues with that. Works perfectly
    Regards
    Marcin

  • Maximum Line Width when Report is running in background

    Hello Experts,
    I have written a ABAP program and user is running in background. My output is of width of 599 characters. But wehn the user is running in the background, it is showing a warning that last 345 columns won't be displayed.
    What is the maximum width, that is allowed for report being displayed in background.
    Kindly help and points will be rewarded. its really urgent.
    Thanks in advance.
    Thanks and Regards,
    Saurabh

    Hey Saurabh,
    I am facing the same problem. I have a report which has 406 characters. It is displayed correctly when executed in foreground but only 255 characters when executed in background.
    You have resolved this issue. Can you please provide me the solution to execute it in background and get the complete output.
    Regards,
    Anosh

  • How to download file to local system when report is run in background?

    Hello all,
    Can anybody tell me how can we donwload file into local machin when the program is running in background?
    thanks

    Hi,
    We can't communicate with presentation server while processing in background.
    if needed we can do this by creating RFC destination and doing some setting in Desktop system.
    [Reference document|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9831750a-0801-0010-1d9e-f8c64efb2bd2]
    Regards,
    Amal

  • Help me, I have a problem with font when export report to PDF?

    Hi everyone! Help me
    I have a problem with font when export report to PDF
    My report uses template .rtf with font Times New Roman (Unicode), language is VietNamese.
    when desige template no problem, error only happen when view report by PDF.
    Edited by: user10236405 on Oct 15, 2008 11:23 PM

    give it time to boot. the time depends on yr memory size n data. soon a process bar will appear indicating the boot process. if still this doesnt work. try formating the phone. but this ways u lose all data on the phone (unless u backed it). relax! the data on the memory card is safe.

  • Problem with printing some report

    hi very body
    we have some problems with printing some reports.
    the problem is when printing a report the computer processes stoped
    and i should restart the computer a gain to print the report for first time and
    then in the second time i have same problem.

    Maher,
    You can check out the new printer driver test utility verions2.0 on OTN at:
    http://otn.oracle.com/software/products/reports/files/printerdrivertest.zip
    This should help you determine if it is a printer problem or whether you should look into another area.
    Also, you don't mention which version of reports, what command line options your using, the computer
    configuration your using whether it is a network printer or local printer connected to the machine. Support
    will need this information to help determine where your problem lies.
    Regards,
    The Oracle Reports Team

  • Problem with the crystal reports XI

    Portuguese
    Boa Tarde, tenho um problema com o cristal reports XI.
    ele esta em producao fazendo a consulta em um servidor mas quando eu acesso passando parametro connectionInfo.ServerName = <endereco do servidor> para um servidor de teste pelo VStudio 2005, ele nao busca os dados deste e continua acessando o servidor de producao.
    gostaria de saber como consertar isso
    English
    Good afternoon, I have a problem with the crystal reports XI. him this in production making the consultation in a servant but when I access passing parameter connectionInfo.ServerName =  I address of the servant > for a test servant for VStudio 2005, he doesn't look for the data of this and it continues accessing the production servant.

    Fabiano, here is what I understand of the issue:
    1) You are using CR XI (I am not sure if release 1 or release 2)
    2) you are using .NET 2005
    3) you are trying to change the server name, but the report keeps giving you data from the original server
    Please answer the following:
    1) Are you using CR XI release 1 or release 2?
    2) Can you change to the new server, using the Crystal Reports Designer?
    3) Can you duplicate the issue on your development computer?
    4) What Crystal Reports service pack are you on?
    5) Are you connecting to the database using OLE DB?
    Ludek

  • Strange problem with SQLPLUS when client and server on the same box

    Hi,
    I have the problem with SQLPLUS when clinet and server on the same machine.
    With client and server on the same machine i am running the command
    sqlplus -l username/password@connect_identifier as SYSDBA.
    With this command, even if you pass in wrong username or wrong password or both as wrong you can able to connect to database and execute queries.
    Once Connect_identifier is correct and trying to log in as SYSDBA ,sqlplus will log in to DB with any username and password.
    How to get rid of this behaviour. Is there any way to do this.
    I am running this command by creating a process in C#
    Edited by: user11000236 on Jun 16, 2009 10:31 AM

    user11000236 wrote:
    Thanks for the info.
    How does Oracle/SQLPLUS allows any username or password to log in to DB with SYSDBA Privillages? What is the concept behind this.?
    This is explainted in the above mentioned link:
    Operating system authentication takes precedence over password file authentication. If you meet the requirements for operating system authentication, then even if you use a password file, you will be authenticated by operating system authentication.

  • Having a problem with dates when I send my numbers doc to excel. dates are all out and that they have to cut and paste individual entries onto their spreadsheet. Any idea how I can prevent this

    having a problem with dates when I send my numbers doc to excel. dates are all out and that they have to cut and paste individual entries onto their spreadsheet. Any idea how I can prevent this.
    I'm using Lion on an MBP and Numbers is the latest version

    May you give more details about what is wrong with your dates ?
    M…oSoft products aren't allowed on my machines but I use LibreOffice which is a clone of Office.
    When I export from Numbers to Excel and open the result with LibreOffice, the dates are correctly treated.
    To be precise, dates after 01/01/1904 are correctly treated. dates before 01/01/1904 are exported as strings but, as it's flagged during the export process, it's not surprising.
    Yvan KOENIG (VALLAURIS, France) mardi 3 janvier 2012
    iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
    My iDisk is : http://public.me.com/koenigyvan
    Please : Search for questions similar to your own before submitting them to the community
    For iWork's applications dedicated to iOS, go to :
    https://discussions.apple.com/community/app_store/iwork_for_ios

  • I have a problem with itunes when I sync the saved music and want to sync my iphone 5 ios 7.0.6 no longer passes the music thing is that just stays on "waiting for sync" and not worry please help are more than 400 songs that do not want to hear who are wi

    I have a problem with itunes when I sync the saved music and want to sync my iphone 5 ios 7.0.6 no longer passes the music thing is that just stays on "waiting for sync" and not worry please help are more than 400 songs that do not want to hear who are wi

    Plawexki wrote:
    ...  do you know if the contacts, photos, messages etc will be wiped?
    Yes... Everything will be Wiped and Replaced with what is currently on Your Mac.
    SYNCING with iTunes
    See here  >  http://support.apple.com/kb/HT1386
    From Here  >  http://www.apple.com/support/iphone/syncing/
    You may find this information of interest...
    Have a read here...
    https://discussions.apple.com/message/18409815?ac_cid=ha
    And See Here...
    How to Use Multiple iDevices with One Computer

  • Problem with exporting a report to excel vial citrix server

    Hi,
    We are encountering a problem with exporting a report to excel through ALV local file icon.A spread sheet is downloading only one row (From header) instead of many rows from the ALV output .  
    Above is working fine for the GUI installed on my PC, but not throgh the Citrix server.
    Can any body have idea on above mentined?
    Regards,
    SK.

    I understand that you're trying to download the file to a local computer  through Citrix. In this case you need autorizations in Citrix for your user ( CItrix user)

  • Problems with navigation when deploy application on WebLogic 10.3

    Hi! I have problems with navigation when I deploy my application on Weblogic server 10.3. In my application I have two pages. One page where I can see the records. In this page I have button Create with action to secound jspx page. When I press this button then the first form (where I could see all records) is empty - the create operation worked, but navigation to second page not. Navigation rules is in adf task flow. In default server all works correct. Where is the problem?
    Maybe when I deploy my application I need specialy deploy adf task flow or somewhere write something? If so, then can you explain me where? Any suggestions what to do.
    Best regards!

    I have in log:
    2009.26.3 20:12:52 oracle.adfinternal.controller.faces.lifecycle.JSFLifecycleImp
    l setLifecycleContextBuilder
    WARNING: ADFc: Replacing the ADF Page Lifecycle implementation with 'oracle.adfi
    nternal.controller.application.model.JSFDataBindingLifecycleContextBuilder'.
    2009.26.3 20:12:52 oracle.adfinternal.controller.util.model.AdfmInterface initia
    lize
    INFO: ADFc: BindingContext is present, using ADFm APIs for DataControlFrames.
    2009.26.3 20:12:52 oracle.adfinternal.controller.metadata.provider.MdsMetadataRe
    sourceProvider <init>
    INFO: ADFc: Controller caching of MDS metadata resources ENABLED.
    2009.26.3 20:12:52 oracle.adf.controller.internal.metadata.MetadataService$Boots
    trap add
    INFO: ADFc: Loading bootstrap metadata from '/WEB-INF/adfc-config.xml'.
    2009.26.3 20:12:54 oracle.adf.share.security.providers.jps.CSFCredentialStore fe
    tchCredential
    WARNING: Unable to locate the credential for key AUGI in D:\bea\user_projects\do
    mains\base_domain\config\oracle.
    2009.26.3 20:12:54 oracle.adf.share.jndi.ReferenceStoreHelper throwPartialResult
    Exception
    WARNING: Incomplete connection information
    Edited by: Debuger on Mar 26, 2009 11:18 AM

  • When attempting to use Lightroom external editor program to edit a photo in Photoshop Elements 10, the photo does not open / appear on photoshop elements screen.  I don't have any problem with this when using Photoshop Elements 6 or Photoshop CS.  I'm usi

    When attempting to use Lightroom external editor program to edit a photo in Photoshop Elements 10, the photo does not open / appear on photoshop elements screen.  I don't have any problem with this when using Photoshop Elements 6 or Photoshop CS.  I'm using a Mac with Mountain Lion OS.  Any solutions?

    Adobe now hides the editor - what looks like it is not - you want the editor hidden in the support folder - see http://forums.adobe.com/message/3955558#3955558 for details
    LN

  • Hi, recently purchased macbook 13", I have problem with sound when connect to my LG Smart tv with sound system. When i change sounds effect on my sound system also LG its all go quiet didn't have this problem with my laptop. Any advise ?

    Hi, recently purchased macbook 13", I have problem with sound when connect to my LG Smart tv with sound system. When i change sounds effect on my sound system also LG its all go quiet didn't have this problem with my laptop. Any advise ?

    Some progess I see. To be honest, i would not waste your time with trying to connect using wireless.
    You are likely to get poor connections and dropping out.
    If its working using a cable, then there is no need to bother with giving me the network settings, bu see how it goes, because sometimes giving the TV a static IP address can give better results.
    There is an example of a couple of powerline adapters on the diagram below. Just ignore the network switch unless you want to connect other devices which are near to the TV.
    http://forumhelp.dyndns.info/networking/powerline3.jpg
    I will monitor the subject line of this thread, should you want to post any more information.
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • I have a problem with Safari: when it opens and I go on google, it opens a page that says: PLEASE UPDATE INTERNET EXPLORERE.   What should I do?

    I have a problem with Safari: when it opens and I go on google, it opens a page that says: please update internet explorer!
    What should I do?

    It's a scam. Have a look at this thread:
    https://discussions.apple.com/thread/6058094?tstart=0

Maybe you are looking for