Problem with Select Filter value.......

HI all
We have created a report on Sales cube,and Inserted the Report into work book.
In the report we have 2 Commission codes 1.Customer,2.material.
   when we are trying to select filter values for customer Commission code,we are Gatting the Pop-up window but the system is Getting hanged, it is not showing any values also.
   We thought it is a Bex problem, but when tried other reports it is working fine.
   Suggest me any possible solution to resolve the issue
Thanks in advance

Little more improvement
After deleting and re creating the indexes, the Filter values are comming but it is taking almost 10-12 min to display the values.

Similar Messages

Problem with Selection screen values of an authorization variable

hi Gurus,
I have an authorization variable for Division in my queries....Now whenever a user tries to run the query...a list of divisions is available to him....All divisions for which he/she has proper roles assigned.
Now the problem is that these values are not restricted to the ones relevant to that query (namely the multi provider)
Eg. for a Flowers Query (divisions relevant to Flowers only) all the divisions (including the ones for Vegetables, Crops etc.) are also visible only because these roles are also assigned to the same user. This needs to be avoided.
In a nutshell....
Is their any way by which i can restrict the number of values popping up for an authorization variable in the selection screen, to only those values which are relevant to the info-provider on which the queries are based ???

hi Deepu,
I did go through that SAP note. I just have one concern regarding that. The check at the Info provider level is clear enough and i already have that in place. Now there are 2 more checks required a) at the info object level and b) at the BEX designer level.
Are all three checks required???
and also how do you place the check at the BEX level??? i could not quite figure that one out...
Any inputs would be welcome.
Thanks,
Nikhil

NW04s(SP7/FEP7)-Select Filter value for HIER in 3.XBexAnalyzer doesn't work

Hi,
We went live with SPS 7/FEP 7 and we are having problem in 3.X Bex Analyzer with "Select Filter Value" for charcteristic having active hierarchy(in this case it is using time dependent hierarchy). (For Eg: Organization Unit)
If I inactivate the hierarchy for organization unit at query level and then execute the query, then "select filter value" works for Organization Unit.
NOTE: I checked other query using hierarchy (not time dependent hierarchy) and I was able to do "select filter value"
Please let me know if any OSS note is available for this issue so that we can fix this issue in our Production Environment.
NOTE: The above issue works in SPS 8/FEP 802 with 3.X Bex Analyzer.
Thankyou,
-Sini
Message was edited by: Sini Kumar

Hi,
Did you have an asnwer to your problem?
We've a similar problem we had a technical upgrade to BI 7.0. But we still work with the frond end tools of 3.5.
When we select in the Bex analyzer a node in an hierarchy it shows the result, but if want to select an other node we must first remove the old filter. This wasn't when we're on the 3.5 enviroment.
Maybe if the problem is solved, this can help us.
Thanks in advance!
Regards,
Juriaan

Problem with ALV filter functionality when filtered for multiple values

Hi,
I am facing a problem with ALV filter functionality.
I have displayed an ALV with some columns col_A, col_B and col_C
col_A---- col_B -
col_C
1----
a -
abc
2----
b -
pqr
3----
c -
lmn
4----
d -
xyz
5----
f -
stu
From the settings link I am applying filter on column col_C and selected multiple values say 'pqr', 'xyz' and 'lmn'.
Now the ALV is showing rows only for last selection i.e . results are fetched only for value 'lmn'.
i.e. after applying the filter the ALV table looks as below:
col_A---- col_B -
col_C
3----
c -
lmn
But ideally it should be:
col_A---- col_B -
col_C
2----
b -
pqr
3----
c -
lmn
4----
d -
xyz
I could not find any OSS note related to this issue.
Please help me resolve this issue.
Thanks,
Feroz

Hi,
I am facing a problem with ALV filter functionality.
I have displayed an ALV with some columns col_A, col_B and col_C
col_A---- col_B -
col_C
1----
a -
abc
2----
b -
pqr
3----
c -
lmn
4----
d -
xyz
5----
f -
stu
From the settings link I am applying filter on column col_C and selected multiple values say 'pqr', 'xyz' and 'lmn'.
Now the ALV is showing rows only for last selection i.e . results are fetched only for value 'lmn'.
i.e. after applying the filter the ALV table looks as below:
col_A---- col_B -
col_C
3----
c -
lmn
But ideally it should be:
col_A---- col_B -
col_C
2----
b -
pqr
3----
c -
lmn
4----
d -
xyz
I could not find any OSS note related to this issue.
Please help me resolve this issue.
Thanks,
Feroz

Problem with "SELECT...FOR UPDATE OF..." and "POST command" combination

Problem with "SELECT...FOR UPDATE OF..." and "POST command" combination
Problem in committing transactions in Multiple Forms (Oracle Forms) with POST built-in command:
Consider that the following statements are written in WHEN-WINDOW-CLOSED trigger of a called form.
Statements in called form (Form name: FORM_CHILD):
go_block('display_block') ;
do_key('execute_query') ;
-- Data from table_b will be populated in this block, based on the value of COLUMN_1 obtained
-- from TABLE_A.
-- Example: If the value of COLUMN_1 is 10, then all the matching records from TABLE_B, which
-- are inserted with value 10 in TABLE_B.COLUMN_1 will be fetched and shown here.
if user_choice = 'YES' then
commit ;
else
rollback ;
end if ;
Statements in calling forms:
There are two calling forms having following statements and it is going to call the above said called form.
CALLING FORM 1
Statements in KEY-COMMIT trigger:
post;
call_form(form_child, no_activate) ;
Statements in ON-INSERT trigger:
select column_1
from table_a
for update of column_1
where column_2 = 'X' ;
update table_a
set column_1 = column_1 + 1
where column_2 = 'X' ;
insert into table_b ...;
insert into table_b ...; Statements in KEY-COMMIT trigger:
post;
call_form(form_child, no_activate) ;
CALLING FORM 2:
Statements in ON-INSERT trigger:
select column_1
from table_a
for update of column_1
where column_2 = 'X' ;
update table_a
set column_1 = column_1 + 1
where column_2 = 'X' ;
insert into table_b ...;
insert into table_b ...;
insert into table_b ...;
Our understanding:
Assume that both the forms are running from two different machines/instances, issuing commit at the same time. In this case, forms will start executing the statements written in ON-INSERT trigger, the moment POST command is executed. Though the commit is issued at the same time, according to oracle, only one of the request will be taken for processing first. Assume that calling form 1 is getting processed first.
So, it fetches the value available in COLUMN_1 of TABLE_A and locks the row from further select, update, etc. as SELECT...FOR UPDATE command is used (note that NOWAIT is not given, hence the lock will be released only when COMMIT or ROLLBACK happens) and proceed executing further INSERT statements. Because of the lock provided by the SELECT...FOR UPDATE command, the statements in calling form 2 will wait for the resource.
After executing the INSERT statements, the FORM_CHILD is called. The rows inserted in to TABLE_A will be queried and shown. The database changes will be committed when user closes the window (as COMMIT is issued in its WHEN-WINDOW-CLOSED trigger). Then the SELECT...FOR UPDATE lock will be released and calling form 2's statements will be executed.
Actual happenings or Mis-behavior:
Calling form 2 starts executing INSERT statements instead of waiting for SELECT...FOR UPDATE lock. Also, the value selected from TABLE_A.COLUMN_1 is same in both the calling forms, which is wrong.
The rows inserted into TABLE_B are having similar COLUMN_1 values in calling form 2 and they are fetched and shown in the called form FORM_CHILD.
Note that in calling form 2 also POST only is issued, but the changes posted there are accessible in calling form 1 also, which is wrong.
Kindly suggest us as to how to fix above problem. It will be much use, if you can send us the information regarding the behavior of Oracle Forms POST built-in also.
Our mail ID: [email protected]
Thanks a lot in advance.

You have several problems:
1. On-Insert will ONLY run if you have created a new record in a base-table block. If you haven't done that, then the POST command will not cause it to run.
2. Select for update without a "no wait" will lock records for the first form, but when the second form tries this, it will hit the ORA-00054 exception, and will NOT wait. The only way you could make it wait is to issue an UPDATE sql command, which is not such a good way to go.
All POST does is issues SQL insert or update commands for any changes the user has made to records in a form's base-table blocks, without following with a Commit command.
Also understand that Commit is the same as Commit_Form, and Rollback is the same as Clear_Form. You should read up on these in the Forms help topics.

WebAn: select filter value on 0plant gives error (but works fine for other)

Hi all,
have something strange in the web analyzer:
i have a query with 0plant in the free characteristics
when I do 'select filter value' when it's in the free characteristics -> dump
when 0plant is in the rows and I do 'select filter value' -> dump
when I do 'select filter value' on 0customer that is in the free characteristics -> works fine
In the BEx Analyzer it works fine...
Anybody an idea?
Ciao
Joke
the strange world of BI...

Hello,
Is it a 7.0 system? maybe the RSTT trace as per note 899572 can give you more information about this error.
Thanks,
Ricardo

Problem with Extract Filter

I have Problem with Extract Filter which was working OK until recently.
Now, when I choose the filter the screen does not come up as the extract screen as it should and no other action can be taken except to press escape which returns me to normal. working. Looks as if the extraction function has been sleected but does not show?
I am trying to use the extract on a layer. Have tried to use it on a selection also.
Anyone suggest a solution please?
Bill

Without a way to reset the tool, the only possibility seems to be to reset your preferences as described in the FAQ.
http://forums.adobe.com/thread/375776?tstart=0
You either have to physically delete (or rename) the preference files or, if using the Alt, Ctrl, and Shift method, be sure that you get a confirmation dialog.
This resets all settings in Photoshop to factory defaults.
(A complete uninstall/re-install will not affect the preferences and a corrupt file there may be causing the problem.)

Select Filter value for Hierarchy node taking long time

Dear Experts,
I am facing an issue with the Filter value selection in a BEx query and searched the forum for a solution but found none.
I have a free characteristic with hierarchy enabled for it and the Filter value selection at Query execution has been set to 'Values in Master data table' in the query definition and in the Multiprovider as well.
However, whenever the filter value selection is performed, the values are being read from teh underlying infocubes instead of the Master data.
We tried checking the BIA Index for the cube as well as the InfoObject and all is fine.
Can someone please point what might be going wrong here.
Thanks & Regards,
Sonal

Could you please check as per Note 1565809 and make sure the F4 mode is really M mode in each level settings?

Selecting filter value doesn't work

Hi guys,
I've a random problem on some bex query when I try to slect filter value on navigable info object of the query.
The problem is that I can't select filter value because of the message:
<b><Install error> Missing ActiveX component: Business Expolrer Selektor</b>
Have you never had this kind of problem? Somebody knows how i can solve it.
Thank you,
Marco

See the below discussion forum
Error when starting Bex analyzer
Hope it will be useful.
Regs
Gopi
Assign points if it helps ..
Message was edited by: Gopi

Select Filter Value

This is an on-going performance issue that I am bogged down with. The best idea would definitely get 10 points and all the other great ideas will be well rewarded for sure! Please help...
The reports on our system run very slow (15 minutes on the average) though our cube has just about 10 million records. What bothers the user the most is that even when they go for "select filter value" on any of the "free characteristics", it takes 10 lazy minutes for the selection screen to show up. We have indices created on the master data and the SAP indices on the Cube dimensions are supposed to be good enough for faster query/selection screen retreival especially when the number of records are just 10 million. RSRV test came out to be fine on DB and cube indices. Any great ideas to improve the time it takes to bring up the selection screen?
Regarding the general query performance, we already have query cache and several aggregates in place. We use BEx, so how effective are the reporting agents on top of these? Please provide some knowledgeable comments to improve the general query performace as well.

The Select Filter Value time almost certainly has to do with the F4 options you have set for those InfoObjects. You can change this for the the InfoObject, or change the setting just for the cube using the Structure Specifc Settings.
Depending on the setting, using F4 for an InfoObject may simply read the Master Data, or it actually interrogates the the master data and the cube to see what values exist, or actually looks to see what values would be available given all the other query criteria. So as you can imagine, the response time of the options can vary a lot.
As far as query performance in general, try searching this forum, you'll find lots of threads. Also try SDN's Performance Tuning Knowledge Center.
I'm assuming you regularly compress the cube(s). Have you verified the aggregates are being used most of the time and confirmed the the value of the aggregate by comparing explain plans.
A lot of issues may relate back to the data model you are using. You can look at adding secondary indices on some of the dimension tables of you have some large dimensions that get receive full table scans because the BW system built index does not relate well to the query restrictions that are actually used.
Pizzaman

Strange Problem with InKeyset filter

I encountered a strange problem with inkeyset filter.I am trying to do some operations on the the selected set of keys within a cache. I have posted the psuedo code below
InKeySetFilter inKeySet=new InKeySetFilter(AlwaysFilter.INSTANCE,orgDestFlightSubset);
// Set of Keys for NamedCacheInstance
inKeySet.ensureConverted
(NamedCacheInstance.getCacheService().getBackingMapManager().getContext().getKeyToInternalConverter());
Extra code to be Added
System.out.println(NamedCacheInstance.entrySet(inKeySet).size());
Always prints 0 eventhoug the keys are present in cache. If i add the following code
NamedCacheInstance.get(orgDestFlightSubset.toArray()[0]) above printing it gives 1 as a result.
I am sure that object is in cache becoz cache.get() does not call the DB again
Can anyone tell me what could be the possible problem?

Hi,
user10866091 wrote:
I encountered a strange problem with inkeyset filter.I am trying to do some operations on the the selected set of keys within a cache. I have posted the psuedo code below
InKeySetFilter inKeySet=new InKeySetFilter(AlwaysFilter.INSTANCE,orgDestFlightSubset);The orgDestFlightSubset must contain keys in Java format which are existing cache keys.
user10866091 wrote:
// Set of Keys for NamedCacheInstance
inKeySet.ensureConverted
(NamedCacheInstance.getCacheService().getBackingMapManager().getContext().getKeyToInternalConverter());I assume NamedCacheInstance is a NamedCache instance obtained from CacheFactory.
In this case you should not call the ensureConverted method. This is called by Coherence on the storage nodes upon deserializing of the filter.
Try these changes.
Best regards,
Robert

Problem with selecting text in Adobe Reader XI

Hi all, I am encountering a problem with Adobe Reader XI and it is very strange I could not find an alike issue on the internet so I guess I have to submit a question with it.
So here it is, I am using Adobe Reader XI Version 11.0.2, operating system: Windows 7. I do not know it starts from when but it has the problem with selecting text - to be copied in pdf documents. I ensure that the documents are not scanned documents but word-based documents (or whatever you call it, sorry I cannot think of a proper name for it).
Normally, you will select the text/paragraph you want to copy and the text/paragraph will be highlighted, but the problem in this case that I cannot select the text/paragraph, the blinking pointer (| <-- blinking pointer) will just stays at the same location so I cannot select/highlight anything to be copied. It happens oftenly, not all the time but 90%.
This is very annoying as my work involves very much with copying text from pdf documents, I have to close the pdf file and then open it again so I can select the text but then after the first copying or second (if I am lucky), the problem happens again. For a few text I have to type it myself, for a paragraph I have to close all opening pdf documents and open again so I could select the paragraph to copy. I ran out of my patience for this, it causes trouble and extra time for me just to copying those texts from pdf documents. Does this problem happen to anyone and do you have a solution for this? I would much appreciate if you could help me out, thank you!

Yeah, I totally agree, this is very strange. I have always been using Adobe Reader but this problem only occurred ~three months ago. It must be that some software newly installed I think. But I have no idea.
About your additional question, after selecting the texts and Ctrl + C, the texts are copied and nothing strange happens. It's just that right after I managed to copy the texts, it takes me a while to be able to select the texts again. For your information, I just tested to select the texts and then pressed Ctrl, the problem happened. And then I tried pressing C and then others letters, it all led to the problem.
I guess I have to stick with left-clicked + Copy until I/someone figure the source of this problem. Thanks a lot for your help!

Problem with: select 'c' as X from dual

Problem with 'select 'c' as X from dual'
I get 2 different results when I execute the above with SQLPlus (or java) depending on the instance I am connected to. For one instance the result is a single character and for the other the character is padded with blanks to 32 chars in the SQLPlus window (and java). Does anyone know what database setting causes this to happen? Is it a version issue ?
Test #1: Oracle 9.2.0.6 - SQLPlus result is padded with blanks
SQL*Plus: Release 9.2.0.1.0 - Production on Mon Dec 10 09:27:58 2007
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to:
Oracle9i Enterprise Edition Release 9.2.0.6.0 - 64bit Production
With the Partitioning option
JServer Release 9.2.0.6.0 - Production
SQL> select 'c' as X from dual;
X
c
SQL>
Test #2 Oracle 9.2.0.1 SQLPlus result is a single character.
SQL*Plus: Release 9.2.0.1.0 - Production on Mon Dec 10 09:29:27 2007
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to:
Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.1.0 - Production
SQL> select 'c' as X from dual;
X
c
SQL>

Using 9.2.0.6 On AIX 5.2 I get the single byte result:
UT1 > select 'c' as X from dual;
X
c
If the databases are on different Oracle Homes you may want to check the sqlplus global logon files for any set commands.
If you executed the two sql statements from different OS directories you may also want to check your sqlpath for sqlplus .logon files.
Try issueing clear columns and repeating the statement. Are the results the same?
HTH -- Mark D Powell --

How to know if implementation with a filter value exist for a BAdI in code?

Hi all,
Scenario:
I created a BAdI. There will be a button on the UI to call its implementation(s); while if there is no implementation with specified filter value, this button needs to be hidden. Thus I need to know if the implementation exist before calling it.
Question:
In the ABAP code, how to get whether implementation with specified filter value exists for a BAdI?
If it's possible, please help provide code.
Thanks and regards,
Said

Problem solved:
data: r_badi type ref to YOUR_BADI,
          badi_impl_num type i.
get badi r_badi
    filters
      flt_name = fit_val.
badi_impl_num = cl_badi_query=>number_of_implementations( badi = r_badi ).
if badi_impl_num > 0.
    "there are badi implementation(s)
endif.

Could not complete the ... command because of a problem with the filter module interface

I just reinstalled Photoshop CS6. I'm running OS X 10.8.2 .
I use the Nik plugins suite, and reinstalled them as well. Now whenever I try to use one of those plugins I get the error "Could not complete the ... command because of a problem with the filter module interface."
The reinstallation was a bit of a struggle due to issues on Adobe's end, and I am hesitatnt to just dive in and reinstall without wome idea as to what might cause these errors.
Any insight appreciated.
Stu

Not sure I know what you mean by "disabling the Nik filter folder".
I have the latest updates for the Nik filters and they are compatible with CS6.
Since yesterday I tried uninstalling the Nik filters, manually locating and removing every file related to Nik/Nik Software, redownloading the Nik installers, uninstalling/reinstalling Photoshop, and reinstalling the Nik filters. Same result.
I am pretty sure this is something on the Photoshop end, but am not sure what to do next. Maybe repeat the above and use the Creative Suite cleaner before reinstalling?
Stu

Problem with Select Filter value.......

Similar Messages

Maybe you are looking for