Problem with Sequence in ADF

Hi,
I have a sequece for a table value. I have the following code to retrieve the sequence value.
protected void create(AttributeList attributeList) {
ApplicationModule am = getDBTransaction().getRootApplicationModule();
DBSequence dS = new DBSequence("REBILL_REQUEST_ID",am);
setRebillRequestId(dS.getSequenceNumber());
super.create(attributeList);
When I run the application, everytime the same sequence number gets displayed in the field. It does not change at all. Any idea why this happens?
Thanks,
Priya

Hi,
not sure why you need to do this programmatically as tehre is a declarative of doing the same (http://download-uk.oracle.com/docs/html/B25947_01/bcentities006.htm#sm0147)
However,
here is the programmatic way of doing it
http://download-uk.oracle.com/docs/html/B25947_01/bcrules004.htm#sthref766
Frank

Similar Messages

Problems with Sequence Operator in OWB

Hi everybody,
i want to use a sequence in my mapping. Now i have two problems.
The first problem is the following. When i want to import my sequence (exists on my DB) i can select the sequence in the Selection Window, but when i click on Import i didn't see it in the Design Center, also there is no window which tells me that i have successfully imported the sequence.
The second problem is, when i drag the Sequence Operator into my Mapping i shows the Selection Window where i have to select the poject and object to bind the operator. But i can't select any object.
Can anyone help me with my problems and tell me how i can use a Sequence and the Sequence Operator in my Mapping
Many thanks in advance.
Greetings

Hi everyone!
I'm having a repeated problem with sequences in OWB: I'm filling a TIME table with 1096 rows. Now matter how and when I create the sequence it always starts with 2 instead of 1. Moreover, the last value of the sequence is 1101, when it was supposed to be 1097 or 1098....
I did achieve the right ouput sometimes, but I must be doing something wrong. Here are the several ways I've tried in OWB:
1) I've created all the sequences by sql code, in SQL DEVELOPER or PLUS*, and then imported to OWB. Because of being imported, I didn't have to deploy each sequence. Then, I've connected (by drag and drop to the canvas mapping) the sequence I wanted with NEXTVAL (as I always do) attached do TIME_ID of table TIME;
2) I've dropped and created, several times(as before), the sequences and never had problems..until now. I've also experimented creating, by scratch, the sequences just in OWB and then deploy them in Control Center. After this, deployed the mapping and executed, just like in 1).
So, the difference lies on how I create the sequences and what are the correct steps to create, deploy (if needed), deploy the map and execute the map.
This is insain and I really need this to work. I've tried so many ways....
Could someone PLEASE help me with this? Any thoughts?

Problem with sequences after import

We recently imported some table data from QA to DEV and now the DEV database has issues with sequences errors. How can I resolve the problem with sequences since we have constraint violation errors as a result of the table sequences being out of sync after the import of several schema tables.

We run a script like the following to get the sequences as close as possible after importing from PROD to DEV:
set serveroutput on;
DECLARE
     CURSOR CUR IS
          SELECT      otherdb_seq.sequence_owner AS owner,
                    otherdb_seq.sequence_name AS seq_nm,
                    TO_CHAR(otherdb_seq.last_number) AS start_nr
          FROM           dba_sequences currdb_seq,
                    dba_sequences@prod otherdb_seq
     WHERE      currdb_seq.sequence_owner IN ('~schemaname~') AND
                    currdb_seq.sequence_owner = otherdb_seq.sequence_owner AND
               currdb_seq.SEQUENCE_NAME = otherdb_seq.sequence_name
          ORDER BY      1, 2;
     sql_string VARCHAR2(500);
BEGIN
     FOR REC IN CUR
     LOOP
     sql_string := 'DROP SEQUENCE '||REC.owner||'.'||REC.seq_nm;
          DBMS_OUTPUT.PUT_LINE(sql_string||';');
          EXECUTE IMMEDIATE sql_string;
          sql_string := 'CREATE SEQUENCE '||REC.owner||'.'||REC.seq_nm;
          sql_string := sql_string ||' START WITH '||REC.start_nr;
          sql_string := sql_string ||' MAXVALUE 999999999999999999999999999';
          sql_string := sql_string ||' MINVALUE '||REC.start_nr;
          sql_string := sql_string ||' NOCYCLE NOCACHE ORDER';
          DBMS_OUTPUT.PUT_LINE(sql_string||';');
          EXECUTE IMMEDIATE sql_string;
          sql_string := 'DROP PUBLIC SYNONYM '||REC.seq_nm;
          DBMS_OUTPUT.PUT_LINE(sql_string||';');
          EXECUTE IMMEDIATE sql_string;
          sql_string := 'CREATE PUBLIC SYNONYM '||REC.seq_nm||' FOR '||REC.owner||'.'||REC.seq_nm;
          DBMS_OUTPUT.PUT_LINE(sql_string||';');
          EXECUTE IMMEDIATE sql_string;
          sql_string := 'GRANT SELECT ON '||REC.owner||'.'||REC.seq_nm||' TO PUBLIC';
          DBMS_OUTPUT.PUT_LINE(sql_string||';');
          EXECUTE IMMEDIATE sql_string;
     END LOOP;
END;

Problem with PPR in ADF

I have a problem with Partial Page Refreshing in ADF faces. what my requirement is I have Table with two cells. One cell contains the ADF Tree component. This tree component can expand their children. If you click any of the tree component then the details of that component displayed on the another cell. I want to display contents with out refreshing the entire page.

let`s give you what i did :
I adding two dataPage ,First one for browse employee and second one for deleting an employee .
So, i did same what is write in a bove link for deleting
but when i run it :
first browse the employee
Then when click the link of delete it is go to DataPage that`s name( Delete employee) .So , when click the button delete
it is return to the first DataPage(browse employee)
and you will see that row is deleting but when go to the DataBase
you will see the row not Deleting.

Problems with refreshing a adf table

Hi,
i am using jdeveloper 11 with the new adf framework.
I use a table which i bind to an arraylist. works fine. the table shows the data from the list.
at sometime i change the backing arraylist but the table show (only in the section i saw on the screen) the old data, when i scroll down the new data is shown.
so i know the arraylist holds the new data and the binding is ok but the refresh of the table doesnt work in the section i see....
hope you understand my problem
hannes

Hi,
As far as I understand , you are not clearing the previous or old data. This results in your table showing the new data towards the end.
If you are using something like this : List tableRows = new ArrayList(); to populate the data in the table , ensure that you clear this list everytime you method runs
You can do this by : tableRows.clear()
HTH
-Shishir

Problems with RowSelection in adf table

I have problems with selection of a row in a adf table. Even though I have set the property : rowSelection="single" , when i select a row, the two other rows that follow, get selected too. For example I have 10 records an when i select the 7th row, the 8th and 9th row are also selected. This doesn't happen with the first rows.
Also when i evaluate an attribute on selectionListener, it is always getting just the one from the first row.
<f:facet name="second">
<af:panelBox id="pbCon" showDisclosure="false" text="Históricos"
binding="#{pageFlowScope.HistoricoEnvios.pbCon}">
<af:table var="row" summary="Histórico de envios"
rows="#{bindings.VOHistoricoEnvios.rangeSize}"
emptyText="#{bindings.VOHistoricoEnvios.viewable ? 'No se encontraron resultados.' : 'Access Denied.'}"
fetchSize="#{bindings.VOHistoricoEnvios.rangeSize}"
rowBandingInterval="0" id="tHist"
disableColumnReordering="true"
value="#{bindings.VOHistoricoEnvios.collectionModel}"
binding="#{pageFlowScope.HistoricoEnvios.thist}"
rowSelection="single">
<af:column width="32" id="c13" align="center"
headerText="#{bindings.VOHistoricoEnvios.hints.Rownum.label}"
rowHeader="unstyled">
.

I have two panelBox, one for a set of options with commandMenuItem and the second one wich shows the result in a table. The first commandMenuItem generate records an show them in the table. Here i got no problem with selection. The third commandMenuItem execute a log of the records generated, here is the problem.
Thes two pages are part o a template, the template has a panelSpliter, in the right are the set of commandMenuItem an in the second is the part that i can edit.
I have also drag an drop from the datacontrol again and have the same result
The table that shows the records is :
<af:panelTabbed id="ptReg" styleClass="AFStretchWidth"
visible="true"
binding="#{pageFlowScope.EnvioSunasa.ptReg}"
partialTriggers="::dpEnv">
<af:showDetailItem text="Datos Personales" id="sdiDp"
stretchChildren="first"
inflexibleHeight="100">
<af:panelSplitter id="psDP" orientation="vertical"
splitterPosition="216">
<f:facet name="first">
<af:panelBox id="pbErrDP"
text="Registros con Error:#{pageFlowScope.EnvioSunasa.numRegErrDP}"
showDisclosure="false">
<af:table var="row" summary="Errores Datos Personales"
rows="#{bindings.VOErrDatosPersonalesAfiliado1.rangeSize}"
emptyText="#{bindings.VOErrDatosPersonalesAfiliado1.viewable ? 'No se encontraron errores.' : 'Access Denied.'}"
fetchSize="#{bindings.VOErrDatosPersonalesAfiliado1.rangeSize}"
rowBandingInterval="0" id="tErrDp"
disableColumnReordering="false"
value="#{bindings.VOErrDatosPersonalesAfiliado1.collectionModel}"
rowSelection="single"
binding="#{pageFlowScope.EnvioSunasa.terrDp}">
.

XSLT-problem with sequence attributes

Hi,
in my XSLT-program (i'm a real newbie!) i'm adding dynamically attributes and their values to a tag, by using the following code :
<SUPPLIER>
<xsl:attribute name="FUNLOC">
    <xsl:value-of select="SUPPLIER_FUNLOC" />
</xsl:attribute>
<xsl:attribute name="NAME">
    <xsl:value-of select="SUPPLIER_NAME" />
</xsl:attribute>
<xsl:attribute name="LOCATION">
    <xsl:value-of select="SUPPLIER_LOCATION" />
</xsl:attribute>
</SUPPLIER>
The problem is that the attributes in the resulting xml-file are alphabetically ordered. For instance :
<SUPPLIER FUNLOC="9522222" LOCATION="NL" NAME="Test vendor VMOI">
How can i arrange that the result of the xml-file is a sequence of entrance is taken, so
<SUPPLIER FUNLOC="9522222" NAME="Test vendor VMOI" LOCATION="NL" >
regards,
Hans
[email protected]

Hi Hans,
I think you're using ABAP-XSLT?!
If you do so, you can solve the sorting problem by using a 1:1 Message mapping after the ABAP-XSLT mapping. This resolves the problem that the nodes are not in the correct order.
In your interface mapping you have to configure 2 mappings:
1: ABAP-XSLT
2: Message mapping.
Of course this means that the total processing time increases a little bit.
I had the same problem with the sequence of my (ACC_DOCUMENT) idoc nodes, the ABAP-XSLT screwed up the idoc, but the 1:1 message mapping solved the problem.
Regards,
Mark

VariableScope problem with sequence containers (SSIS 2012)

Hi,
a co-worker of mine experienced a problem with variable scopes in SSIS 2012 when copying a sequence container.
This is what he tried to do:
Create a sequence container with a data flow task and a script component
Add variable "a" with scope set to the sequence container
Add "a" to ReadOnlyVariables in the script component and assign it to a variable within PreExecute() in the script
Copy the sequence container (with DFT and SC)
Rename (or remove and add new - doesn't matter) variable "b" with scope set to the new sequence container
Change variable in ReadOnlyVariables of copied SC to "b", change it in the script as well
Now when executing the package, one of the sequence containers will always fail. Interestingly enough, it is not always the same but switches seemingly randomly. It doesn't matter if the script is written in C# or VB.
The following error is thrown:
Exception from HRESULT: 0xC0010009
   at Microsoft.SqlServer.Dts.Runtime.Wrapper.IDTSVariables100.get_Item(Object Index)
   at SC_f8fa68ce667a42d2b4b154c26831db5f.Variables.get_VarForCopySeqC()
   at SC_f8fa68ce667a42d2b4b154c26831db5f.ScriptMain.PreExecute()
   at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.PreExecute()
In this case, VarForCopySeqC is the variable used in the copied sequence container, but the failing one is the original sequence container.
Does anyone have an idea how to resolve this? Thanks in advance for anyone helping us out here!
Regards,
Thorsten H.

If the variable is scoped to the Sequence Container then you could leave it as is in the new Sequence Container too. Why rename it to "b" ?
Granular scoping makes the package debugging and maintenance a lot more difficult because you have to bring the component in focus to see its scoped variables. It is easier to have package-scoped variables IMHO.
- Aalamjeet Rangi | (Blog)

Problem with Sequence in Form

I created a sequence as:
-- Create sequence-----
create sequence MY_SEQ minvalue 1 maxvalue 100000 start with 21increment by 1cache 20 order;
In Form(Form10g) I set the Initial Value propery as:
:sequence.30_seq.nextval
The problem is, Whenever I go for Insert Item and cancel Insertion. The sequence continues to the next after next. How do I keep it with MAX+1 through Sequence

Yes, I've worked with something like that before. I'm not sure if there was an issue with using a 'for update nowait' lock, but it used dbms_lock instead. After getting a lock, delete the record. If the user saves the form then the sequence will used there, if they roll back it will remain on the table.
But with more than one user and the option not to save after the sequence has been issued, you could still have gaps in the sequences within each session and sequence numbers will not always be issued in ascending order. In the long term you will have a continuous sequence on the table (unless a record is deleted), but in the short term it may not look like it, so be prepared for complaints.

Problems with combination of ADF Faces, Tomahawk, Facelets and MyFaces

Hello,
I am trying to combine all things named in the Subject and run into several problems:
1. ADF Render Kit forces the Tomahawk Components to be rendered in a wrong way or stop there functionality.
Example 1: The clickable parts of the t:dataScroller Tag can not be accessed because an empty a Tag will be rendered after the outputText.
Example 2: The t:commandSortHeader Tag can be clicked but the table content will not be sorted anymore.
The given examples works if i remove the default-render-kit-id element from the faces-config.xml
2. The ad:table Tag runs into an ClassCastException, only when I put a simple example code snipped into my xhtml file.
Code snipped:
<af:table>
<af:column>
<f:facet name="header">
<af:outputText value="Firstname"/>
</f:facet>
</af:column>
<af:column>
<f:facet name="header">
<h:outputText value="Lastname"/>
</f:facet>
</af:column>
</af:table>
The stack trace look like this:
java.lang.ClassCastException at oracle.adfinternal.view.faces.renderkit.core.xhtml.DesktopTableRenderer._renderRegularColumns(DesktopTableRenderer.java:1029)
     at oracle.adfinternal.view.faces.renderkit.core.xhtml.DesktopTableRenderer.renderSingleRow(DesktopTableRenderer.java:109)
     at oracle.adfinternal.view.faces.renderkit.core.xhtml.TableRenderer.encodeAll(TableRenderer.java:229)
     at oracle.adfinternal.view.faces.renderkit.core.xhtml.DesktopTableRenderer.encodeAll(DesktopTableRenderer.java:79)
     at oracle.adfinternal.view.faces.renderkit.core.CoreRenderer.encodeEnd(CoreRenderer.java:159)
     at oracle.adf.view.faces.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:624)
     at oracle.adf.view.faces.component.UIXCollection.encodeEnd(UIXCollection.java:438)
     at oracle.adfinternal.view.faces.renderkit.RenderUtils.encodeRecursive(RenderUtils.java:54)
     at oracle.adfinternal.view.faces.renderkit.core.CoreRenderer.encodeChild(CoreRenderer.java:232)
     at oracle.adfinternal.view.faces.renderkit.core.CoreRenderer.encodeAllChildren(CoreRenderer.java:255)
     at oracle.adfinternal.view.faces.renderkit.core.xhtml.PanelPartialRootRenderer.renderContent(PanelPartialRootRenderer.java:65)
     at oracle.adfinternal.view.faces.renderkit.core.xhtml.BodyRenderer.renderContent(BodyRenderer.java:117)
     at oracle.adfinternal.view.faces.renderkit.core.xhtml.PanelPartialRootRenderer.encodeAll(PanelPartialRootRenderer.java:147)
     at oracle.adfinternal.view.faces.renderkit.core.xhtml.BodyRenderer.encodeAll(BodyRenderer.java:60)
     at oracle.adfinternal.view.faces.renderkit.core.CoreRenderer.encodeEnd(CoreRenderer.java:159)
     at oracle.adf.view.faces.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:624)
     at com.sun.facelets.tag.jsf.ComponentSupport.encodeRecursive(ComponentSupport.java:242)
     at com.sun.facelets.tag.jsf.ComponentSupport.encodeRecursive(ComponentSupport.java:239)
     at com.sun.facelets.tag.jsf.ComponentSupport.encodeRecursive(ComponentSupport.java:239)
     at com.sun.facelets.FaceletViewHandler.renderView(FaceletViewHandler.java:521)
     at oracle.adfinternal.view.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:157)
     at org.apache.myfaces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:352)
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:107)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
     at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._invokeDoFilter(AdfFacesFilterImpl.java:367)
     at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._doFilterImpl(AdfFacesFilterImpl.java:336)
     at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl.doFilter(AdfFacesFilterImpl.java:196)
     at oracle.adf.view.faces.webapp.AdfFacesFilter.doFilter(AdfFacesFilter.java:87)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:16)
     at org.apache.myfaces.component.html.util.ExtensionsFilter.doFilter(ExtensionsFilter.java:122)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:659)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:285)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:126)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
     at java.lang.Thread.run(Thread.java:534)
I followed all steps for the ADF installation and the suggested steps for using ADF with Facelets.
Used versions:
- Oracle ADF Faces 10.1.3 Early Access
- myFaces 1.1.1
- Facelets 1.1.1
- oc4j 10.1.2.0.2
Has somebody try to use these things together, too?
Thanks,
Carsten

Hi,
Inside our fusion applications(ADF/Webcenter) using combination of JSTL and ADF Faces is good practice or pitfal?
To suggest a a rule of thumb: Try ADF Faces on-board functionality first before reaching out to JSTL. The difference between JSF in general and JSTL is that the JSTL expressions are evaluated at page compile time wheras JSF expressions are evaluated deferred. This difference may have an impact to PPR refreshes and the data rendering (which in many cases I assume you can fix by setting the ADF Faces component content delivery to immediate instead of deferred). On a training slight I flagged JSTL with a "heads up" alert because of this
Frank

Problems with sequence context and W2000

I have a Test Stand 1.0 sequence that works correctly in W98 but I have tried to execute in a PC with W2000 and the sequence doesn´t work. It seems that the problem is with the sequence context activeX pointer.

Hello,
TestStand 1.0 and 1.0.1 did not support operation under Windows 2000. TestStand 1.0.2 and later did. Are you by any chance using one of the versions not supported? If so, I would recommend upgrading to the latest version which is TestStand 3.0.
Bob

This is a tough one! Problem with sequence settings....

OK...where to begin!
Here is some background (I have posted many questions about these issues and have resolved most of them, except this project)
1.Recently upgraded to 6.0.1
2. 'lost' my scratch disc (ok, I accidently deleted it)
3. All projects are OK to do without, except this one!
4. The footage for this project was from 2 cameras: one is DV and one is HD. The HD footage was downgraded to DV during capture from camera for the original project. Now, with 6.0.1, I bring it in HD and mix the footage on the same timeline with the DV (which is so cool and so much easier for me!) But I wanted to make sure and do the same thing I did for the original clips on this project, so when I just batch captured all the clips, I brought the HD in as DV. Both were shot wide screen.
This one sequence is 6 minutes long and I COULD recreate it, but it is very detailed and has a lot of filters, edits, etc. Here is the problem:
I did a batch capture on all the clips and successfully got all the clips back and the timeline plays, but the two different "cameras" footage looks different in the canvas: (the sequence settings are frame size: ntsc dv 3:2, pixel aspect ratio ntsc-ccir601/dv and anormorphic is checked)
The HD footage, downgraded to DV, looks fine
The DV footage is stretched, and has a bar on the top and bottom.
I have played around with the sequence settings and these are the best results i can get.
Now I made a new sequence with same settings as above and i dragged a couple different clips from the browser into the timeline and they are fine... (these clips are the same ones in the problem sequence that look stretched)
Any ideas??
Thanks in advance!!

I understood that the sequence looked at the first stuff dropped into it for behavior. If you dropped the problem material from the first sequence into the second sequence you created prior to dropping any thing else in then it will behave as you would expect. if you dropped footage that wasn't formatted the same as your sequence settings you get the "...would you like to ..." and the sequence settings get changed. I avoid this because some of the changes applied don't allow my Kona to playout.

Problem with Dates in ADF Calendar (Possibly Oracle 9i related?)

Hi All,
I have an entity and up-datable view object based on the following table
CREATE TABLE IM_CALENDAR
ID VARCHAR2(32 BYTE),
START_TIME DATE,
END_TIME DATE,
PROVIDER_ID VARCHAR2(32 BYTE),
TITLE VARCHAR2(256 BYTE),
RECURRING VARCHAR2(32 BYTE),
REMINDER VARCHAR2(3 BYTE),
TIME_TYPE VARCHAR2(6 BYTE),
LOCATION VARCHAR2(256 BYTE)
When I run the ADF Application, it responds with the following error.
Cannot create an object of type:java.sql.Date from type:java.util.Date with value:22/12/10 00:00
In the app server console, I get the following error message.
<Utils><buildFacesMessage> ADF: Adding the following JSF error message: Cannot create an object of type:java.sql.Date from type:java.util.Date with value:22/12/10 00:00
oracle.jbo.domain.DataCreationException: JBO-25009: Cannot create an object of type:java.sql.Date from type:java.util.Date with value:22/12/10 00:00
at oracle.jbo.domain.TypeFactory.get(TypeFactory.java:852)
In my Oracle XE database this ran fine. But I am now running on an Oracle 9i Database, will this cause an issue with ADF?

The error message you give has nothing to do with the database.. seems that something else has changed (assuming it used to work)

Multitable insert problem with sequences

Lets consider that I have the folowing configuration:
create table t1 (col number, col2 varchar2(100));
create table t2 (col number, col2 varchar2(100));
create sequence s;
I want to put the same sequence value into many tables with one multitable insert like:
insert all
into t1 (col, col2) values (a, 'dummy 1.1')
into t2 (col, col2) values (a, 'dummy 1.1')
into t2 (col, col2) values (a, 'dummy 1.2')
into t2 (col, col2) values (a, 'dummy 1.3')
select s.nextval as a from dual
I know that the previous statement is "impossible" (acording oracle documentation http://download-uk.oracle.com/docs/cd/B19306_01/server.102/b14200/statements_9014.htm it is forbidden and issue "ORA-02287: sequence number not allowed here" exception)
Do you have any ideas how to workaround this?

SQL> insert all
2 into t1 (col, col2) values (s.nextval, 'dummy 1.1')
3 into t2 (col, col2) values (s.currval, 'dummy 1.1')
4 into t2 (col, col2) values (s.currval, 'dummy 1.2')
5 into t2 (col, col2) values (s.currval, 'dummy 1.3')
6 select 1 from dual;
4 rows created.
SQL> select *from t1;
       COL COL2
         1 dummy 1.1
1 row selected.
SQL> select * from t2;
       COL COL2
         1 dummy 1.1
         1 dummy 1.2
         1 dummy 1.3
3 rows selected.
SQL> Nicolas.

Problem with sequences

I'm having trouble finding a sequence for a video file that I recorded. The settings for the video are 1680x1050 (1.0) 200fps. It's a video that I recorded off my screen. What sequence should I use to make this work properly? I looked through all of the presets and didn't see anything that looked close to that.
Thanks for any help.

Use General in the Sequence settings to create a desktop sequence, or even easier, drag a clip from the project panel to the New Item icon and a new sequence with the correct settings will be created automatically.

Problem with Sequence in ADF

Similar Messages

Maybe you are looking for