Problem with server behind router

Hey there,
I'm working on a small chatting application which performs pretty well when connecting to a server on the same local network, but not-so-well when it's connecting to a server behind a router that's not on the same network.
Is there any way to get past this problem without using port forwarding? I'd try using that, if it weren't for the fact that the router in question didn't come with any software for configuring it.
I've looked around for a fix to this problem for a while, but I still haven't managed to find anything. Any ideas?
The chat program uses ObjectInput/Output streams to send data between the client and server.

Without port forwarding on the router, your options are a bit limited. You'll probably need a central server to act as a go-between, or at least a rendez-vous point.
But doesn't your router have an HTML interface? What make and type is it? A manual should be easy to find online, if you don't have a printed version.

Similar Messages

My iphone 5 does not remember the password of my home network. Well this is ot the case with my ipad. The wifi gets disconnected every 2 minutes. Its not any problem with my wifi router as my ipad and other devices work fine. So how do i fix this problem?

Well my iphone 5 does not remember my home network. This is not a problem with the wifi router as the ipad works absolutely fine. The wifi loses it connection in just 2 minutes. So could you please fix this problem.

Not unless the modem is causing a problem.
What you want to do is get it to work reliably over Ethernet first, then tackle wifi. Power off the modem. On your macbook, delete the Ethernet configuration and the Wifi configuration. Power up the modem, then connect the mac via Ethernet. Create the new Ethernet configuration and see if you can connect.

Tried opening Firefox and got error code 502 - problem with server - how do i fix please

i tried to open internet through Firefox as usual and got repeated error message 502 (problem with server - try again in 30 seconds) - but no joy. is there a problem with the server or is there a problem at my end somehow?
tks Paul

Thanks for the suggestion Rhonda. You're correct in saying this is impractical though. The fact is, I can't open a tab to keep it open. After doing some online research, I was able to locate a site where I could download a previous Firefox version (6.0). Problem solved! Google: "''How can I find a previous version of Firefox''. As I stated in my original question, Mozilla should not update w/o making certain it doesn't create these issues. I spent hours on this. I also turned off auto updates. I appreciate your suggestion. Thank you!

Pls help me.i have a problem with WRT54G wireless router.

Dear all, Now i got face some problem with WRT54G wireless router.The problem is after i connect to the internet...the wireless will automatic drop..is that any ppl here got face this and got any solution to solve it...?thanks for sharing..

hi...logon to router's setup page and try changing channel to 11, go to advanced wireless settings, try changing transmission rate to 54Mbps, beacon interval to 50, fragmentation and RTS threshold to 2304, also try upgrading latest firmwar on the router...check whether it maks any difference or not and let me know.

I cannot sign in to icloud because of problems with server

I have Lost It All!
I cannot find all of my iTunes info.
I tried signing into iCloud due to a message "problem with server".

I have used the solution below to fix mine and others that have run into this issue.
Start --> Programs --> Accessories (Right Click on Command Prompt) --> Run as Administrator
then type in: "Netsh winsock reset" (-without the quotes-)
Hit enter, restart PC, iCloud For PC should now connect without any server errors
(This solutions will work in some instances when trying to fix errors associated when you are unable to connect to iTunes also.)

Why my Ipod send a message like "a problem with server bloq connection of ID Apple"

Hi i just buy an Ipod Touch 8GB is my second one the last one have lost in the street, i Know my Apple ID and my password but when Itry to setup the new one send that message i am from mexico and my message is in spanish more less like this Impossible start session A problem with server is bloking the connection with the ID Apple . Try to connect again.

What is the error message you are receiving and it is from iTunes or your iPod Touch?
B-rock

Problem with Cisco 861W router and outgoing VPN

We have a Cisco 861W router that is blocking an outgoing PPTP on the internal access point only. The outgoing VPN works when the traffic is through a wired connection or the connection is on another access point. We fail to make a connection only when connection to the 861W's internal Access Point.
Here is the Access Point Configuration:
Current configuration : 2100 bytes
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname obap
enable secret 5 $1$.1RF$go1D7WITXUn3s8TUaw3tC.
no aaa new-model
dot11 syslog
dot11 ssid OLIVER
   authentication open
   authentication key-management wpa
   guest-mode
   wpa-psk ascii 0 XXXXXXXXXXX
username XXXXXX privilege 15 secret 5 $1$Wc0K$OzcQDDQfjHP6La31eXMoG/
bridge irb
interface Dot11Radio0
no ip address
no ip route-cache
encryption mode ciphers aes-ccm tkip
ssid OLIVER
antenna gain 0
station-role root
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface GigabitEthernet0
description the embedded AP GigabitEthernet 0 is an internal interface connecti
ng AP with the host router
no ip address
no ip route-cache
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
interface BVI1
ip address 192.168.0.2 255.255.255.0
no ip route-cache
ip http server
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
bridge 1 route ip
banner login ^CC
% Password change notice.
Default username/password setup on AP is cisco/cisco with priv¾ilege level 15.
It is strongly suggested that you create a new username with privilege level
15 using the following command for console security.
username <myuser> privilege 15 secret 0 <mypassword>
no username cisco
Replace <myuser> and <mypassword> with the username and password you want to
use. After you change your username/password you can turn off this message
by configuring "no banner login" and "no banner exec" in privileged mode.
^C
line con 0
privilege level 15
login local
no activation-character
line vty 0 4
login local
cns dhcp
end
obap#
Here is the Router's Configuration:
Current configuration : 5908 bytes
! No configuration change since last restart
version 15.0
no service pad
service tcp-keepalives-in
service tcp-keepalives-out
service timestamps debug datetime msec localtime show-timezone
service timestamps log datetime msec localtime show-timezone
service password-encryption
service sequence-numbers
hostname obrouter
boot-start-marker
boot-end-marker
logging buffered 51200
logging console critical
enable secret 5 $1$i9XE$DjxFVAEC9nC4/r6EQKCd6/
no aaa new-model
memory-size iomem 10
clock timezone PCTime -5
clock summer-time PCTime date Apr 6 2003 2:00 Oct 26 2003 2:00
crypto pki trustpoint TP-self-signed-1856757619
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-1856757619
revocation-check none
rsakeypair TP-self-signed-1856757619
crypto pki certificate chain TP-self-signed-1856757619
certificate self-signed 01
3082024D 308201B6 A0030201 02020101 300D0609 2A864886 F70D0101 04050030
31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D 43657274
69666963 6174652D 31383536 37353736 3139301E 170D3036 30313032 31323030
34345A17 0D323030 31303130 30303030 305A3031 312F302D 06035504 03132649
4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D31 38353637
35373631 3930819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281
8100B1A4 FB786547 3D582260 03DB768D 116BDE9A 309FBA04 B53F77B0 BFE32344
7C3439B3 97192B36 760A9411 1D5C7549 8D86F532 ABA44F53 0D08B7F4 A9A747D5
071330C3 65BF25A8 927F3596 29BB5A80 90C8D169 22268476 3B8DDE1E FDB7170D
B4820D03 5580A849 A92C7E76 9AC10867 505A2FEE 64360741 7F9DBDBF 3D79982C
F81D0203 010001A3 75307330 0F060355 1D130101 FF040530 030101FF 30200603
551D1104 19301782 156F6272 6F757465 722E6272 75736868 6F672E63 6F6D301F
0603551D 23041830 168014D8 5BC2FFB2 967A4C7B 11B44122 5C8D31F7 749B9230
1D060355 1D0E0416 0414D85B C2FFB296 7A4C7B11 B441225C 8D31F774 9B92300D
06092A86 4886F70D 01010405 00038181 005901F1 C239074B B8213567 CF7B65BF
DAFE4557 69B2A3B1 5F2593C7 A54B9598 23FD5E7A 563AA6E0 AFB25801 FA0061E8
F9545372 DB600B3A BE68AE65 1EDA593E 6A0C96B8 5A4136AF 393F9AAC 651E1C36
B8B7C6C0 47936C24 D2ECE9A5 9446EE32 FC7461FA AD8CF1CE A7FBF341 07E9C3C6
505AB88D 0E7FCAFC 5792298A E5E4D1FE CC
        quit
no ip source-route
ip dhcp excluded-address 192.168.0.1 192.168.0.99
ip dhcp pool ccp-pool1
   import all
   network 192.168.0.0 255.255.255.0
   dns-server 216.49.160.10 216.49.160.66
   default-router 192.168.0.1
ip cef
no ip bootp server
ip domain name brushhog.com
ip name-server 216.49.160.10
ip name-server 216.49.160.66
license udi pid CISCO861W-GN-A-K9 sn FTX155281FY
username tech38 privilege 15 secret 5 $1$d/4Z$n/23EsXbzfHF5XfJ8Nv.y0
ip tcp synwait-time 10
ip ssh time-out 60
ip ssh authentication-retries 2
interface FastEthernet0
interface FastEthernet1
interface FastEthernet2
interface FastEthernet3
interface FastEthernet4
description $ES_WAN$$FW_OUTSIDE$
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
duplex auto
speed auto
pppoe-client dial-pool-number 1
interface wlan-ap0
description Service module interface to manage the embedded AP
ip unnumbered Vlan1
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
arp timeout 0
interface Wlan-GigabitEthernet0
description Internal switch interface connecting to the embedded AP
interface Vlan1
description $ETH-SW-LAUNCH$$INTF-INFO-HWIC 4ESW$$ES_LAN$$FW_INSIDE$
ip address 192.168.0.1 255.255.255.0
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
ip nat inside
ip virtual-reassembly
ip tcp adjust-mss 1412
interface Dialer0
ip address negotiated
no ip redirects
no ip unreachables
no ip proxy-arp
ip mtu 1452
ip flow ingress
ip nat outside
ip virtual-reassembly
encapsulation ppp
dialer pool 1
dialer-group 1
ppp authentication chap pap callin
ppp chap hostname XXXXXXXXXXXXX
ppp chap password 7 XXXXXXXXXXXXXXXX
ppp pap sent-username XXXXXXXXXXXXXX password 7 XXXXXXXXXXX
no cdp enable
ip forward-protocol nd
ip http server
ip http authentication local
ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
ip nat inside source static tcp 192.168.0.25 80 interface Dialer0 80
ip nat inside source list 1 interface Dialer0 overload
ip route 0.0.0.0 0.0.0.0 Dialer0
logging trap debugging
access-list 1 remark INSIDE_IF=Vlan1
access-list 1 remark CCP_ACL Category=2
access-list 1 permit 192.168.0.0 0.0.0.255
dialer-list 1 protocol ip permit
no cdp run
control-plane
banner exec ^C
% Password expiration warning.
Cisco Configuration Professional (Cisco CP) is installed on this device
and it provides the default username "cisco" for one-time use. If you have
already used the username "cisco" to login to the router and your IOS image
supports the "one-time" user option, then this username has already expired.
You will not be able to login to the router with this username after you exit
this session.
It is strongly suggested that you create a new username with a privilege level
of 15 using the following command.
username <myuser> privilege 15 secret 0 <mypassword>
Replace <myuser> and <mypassword> with the username and password you
want to use.
^C
banner login ^CAuthorized access only!
Disconnect IMMEDIATELY if you are not an authorized user!^C
line con 0
login local
no modem enable
transport output telnet
line aux 0
login local
transport output telnet
line 2
no activation-character
no exec
transport preferred none
transport input all
line vty 0 4
privilege level 15
login local
transport input telnet ssh
scheduler max-task-time 5000
scheduler allocate 4000 1000
scheduler interval 500
end
Any help would be appreciated

Hello,
i have the same problem with router CISCO861W-GN-E-K9. Version 12.4(22r)YB5, RELEASE SOFTWARE (fc1)
Can someone help?
Thank you.
Here is my config for internal AP and router.

Macbook Pro Problems with D-Link Router

My router D-link (Dl-624+A, model available in Asia) 802.11g/2.4 Ghz wireless router serves a G5 iMac, a G4 Aluminum Powerbook plus a Windows laptop and desktop. We have never experienced any problems with the network.
I have recently bought a 17" Macbook Pro 2.4 Ghz laptop (intel MBP) and have not been able, in any combination of modes, to join the network. A dialogue box simply says that there was an error trying to join the network.
I have no problems joining other wireless networks around town its so easy, just the one at home is the problem.
What is going on? Is there a fix? Thanks

Hi, my MacBook Pro can't connect to my D-Link DSL-G604T router via wireless too.
Airport can see my wireless connection and asks for the WEP password to connect. I put the password key in and an error pops up saying it cannot connect. I can connect via an Ethernet cable. Also, my previous system PowerBook G4 is able to connect via to the router via wireless, hence there is nothing wrong with my network.
Based on the suggestions from other threads, I tried to set my security to WPA instead of WEP. However, after I set my security to WPA, and tried to connect to my wireless network, the AirPort popup only gives me 4 options for the Wireless Security:
WEP Password
WEP 40/128-bit hex
WEP 40/128-bit ASCII
LEAP
There isn't an option to use WPA. Can anyone advise?

Export Release Build - Problem with Server Settings

Hello, i have a big problem and i searched the whole day yesterday but didnt found an answer...
I started a Flex Mobile and PHP Project. The Project has a Data/Services included wich loads some customer from a database (sql)... for the first a
used Zend and try it local (http://localhost and used the htdocs Folder of Zend)... EVERYTHING WORKS PRETTY FINE... so NOW my problem
I wanted to export this project to a release build for my android phone... so the first warning of Flash Builder ist that the project ist currently configured to access data services from a local url. Before exporting the application, you may need to deploy your services to a remote server, then change the server root URL for your project. Click here to change server settings.
When i click the button i get the server setting.
Web root: C:\Program Files (x86)\Zend\Apache2\htdocs
Root URL: http://localhost
whe i change it now i get an eror:"The selected web root folder does not exist (i attached i screenshot of it).
i entered de domain of my server (i also tried the ip) at Root URL. And i think there ist a problem with the Web root...? i get scary

i know WHY Flashbuilder tells me that i have to change the setting when i deploy on the device
my problem ist that i got this error...
and the domain wich i have in the screenshot should only explain how i tried it...
i entered my server url (the real domain) and i entered the folder "app" wich i have created via ftp on my server...
BUT i also get this error (lik in the screenshot)
i think at ROOT URL i cant make lot mistakes .... http://myserver.de or the ip
but i think maybe my web root ist incorrect? i entered here the folder wich is directliy on my server...?
i dont know exactly but i got an error like in the screen

WRE54G wireless extender problem with WRT600N wireless router

My Vista laptops work fine with the WRT600N router but not with the WRE54G extender. On the other hand my XP laptop works fine with the wireless extender so I know that both router and extender are working. Linksys tech support told me that the WRE54G is not compatible with the WRT600N, which is simply not true. With my XP laptop the signal goes from poor (5-10 Mbps) without the extender to excellent (54 Mbps) with the extender. Also, the lower blue light on the extender blinks indicating data transmission. I can access the setup page of the extender only with the XP laptop and wired desktop computers but not the Vista laptops. I suspect there is a Vista network setting that is the problem. I've turned off the firewall but to no avail. I've also switched between mixed mode and G-only, which made no difference. Anybody have any suggestions?

pfl wrote:
I have a secure wireless network (WPA). Perhaps my 4-5 year old XP laptop is the only laptop on the planet that works with the WRE54G-WRT600N combination. But I can assure all the doubters that this laptop categorically works flawlessly when I would otherwise be out of range without an extender. Good luck to spalaw. Please let me know if you are get your WRT160n to work with the WRE54G, especially you're able to connect with a Vista laptop.
Hi
I am Afraid and wont be surprised if ya all people are nt able to use a N series Router with a G series Range Expander !
the Reasons is simple - N series is not BackWard Compatible as u check out the sources around. (Back Ward Compatible means compatible with the previous versions for its wireless Band , e:g - G band and B band.)
as far as my experience is concerned regarding the Range Expanders , me and my bud wasted a whole Week Configuring a WRT350N and WRE54G v3 , and it worked somehow on the seventh day for an hour and Lost the connection again! Dayumm !
and we tried setting up with the same expander with WRT54GS v7.2 , it worked like a charm.
Conclusion : " WRE54G is a g series 2.4 Ghz expander which will work fine with all g series router though may not work with N Serious routers."
and if you really wish to Use something which can actually Extend the range for ur N routers signals , Better go for WAP4400N !!!!!!
And if someone still wish to run around , wanna try some tweaks (which i dont preferr )!
for WRT600N , just enable 2.4ghz band . as Range expander doesnt support 5 Mhz.
Use Only standard Channels . e.g : 1,9,3,11 .(No Wide and stuff.)
Try using WEP encryption first . (cause thats how we made WRT350N worked for a while. sighs)
At last , Wish u Luck.
Pe@c3
"What u Give , is wht u better start expecting to take back".. - http://Forsakenbliss.wordpress.com

WS2012 Standard R2 with Essentials sudden problem with Server Manager, Essential Dashboard and other services

Hi all,
I have a problem with my Windows Server 2012 R2 with Essential installed. When I try to run Server Manager the server manager window doesn't appear and the same thing applies for starting the essentials dashboard. This leads to that some of the features doesn't
work properly like remote web access, client backup and so on. When I check the Services a lot of services haven't even started. Trying to manually start for example Windows Server Essentials Management Services gives me following error message:
"Windows could not start the Windows Server Essentials Management Services on Local Computer. Error 1068: The dependency service or group failed to start"
What can be wrong here? I haven't done anything to the server that could start these problems. This started all of a sudden.
Thank you all in advance for any help.
EDIT:
I rebooted my server in safe mode and I tried to run SFC /Scannow which stops at 84% and gives me following message:
"Windows Resource Protection could not perform the requested operation."
I also tried to run "DISM.exe /Online /Cleanup-Image /RestoreHealth". This did not help either. It completes the operation but nothing changes. The problem is still there.
I thought that my server backups were OK and that this problem would be gone by restoring the C: drive with backup image. The problem is that all my good backups was rewritten with new backups that could not take backup of the C: drive for some reason. Now
I need to solve this problem without reinstalling the whole operating system.
EDIT:
I have also completed the chkdsk C: /r command and now the SFC /Scannow command can be completed, with notification that some files could not be fixed. I have attached the sfcdetail.txt file which points out that
"tsgclean.exe" cannot be repaired. What has that file to do with my WS2012 problems...
2015-01-04 03:12:54, Info CSI 00000477 [SR] Cannot repair member file [l:24{12}]"tsgclean.exe" of Microsoft-Windows-TSProxy-EdgeAdapter,
Version = 6.3.9600.16384, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch

Hi,
Did you remember any operation which you had done before this issue occurred? For examples, install any update,
install any third-party application or any other? Just a confirmation, thanks for your understanding.
For those problematic services, please open services’ Properties and navigate to
Dependencies tab, then check if all system components which this service depends on run as normal.
In addition, please open Event Viewer and check if find relevant events. Meanwhile, please follow the path:
%programdata%\Microsoft\Windows Server\Logs and check Dashboard log file if find more clues.
By the way, when you run
sfc /scannow command completely, did you open Server Manager or Dashboard again? Any difference?
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected].
Hello Justin,
Regarding the third-party applications:
I have not installed any third-party application that could cause this problem. All my third-party applications that are installed on the WS2012 R2 are confirmed working well with the operative system and are installed at the time when I hadn't these problems.
I cannot say anything about windows update because that is something that I update once in a week after checking that no user is reporting any issues. I have learned my leason with windows update when I had Surface Pro 2, that was a dissaster.
Regarding the Windows Updates:
Anyway, I tried to remove all the windows updates before as well (not the security updates) down to 5th December which is the time when I know that my server worked well. Only two updates could not be removed (KB3012199 and KB2989647). I don't
know if these two updates can cause any problem?
Regarding the problematic services:
For example: Checking the properties for "Windows Server Essentials Management Service" -> It is dependable on
"1. Active Directory Domain Services" and "2. Windows Server Essentials Provider Registry Service".
No 1 is running but not no 2. If I try to start no 2 service it will give me the same message as before:
"Windows could not start the Windows Server Essentials Management Services on Local Computer. Error 1068: The dependency service or group failed to start"
Regarding the Logs:
I have uploaded Dashboard log files which are created after 5th December to my dropbox account: Link
Regarding the SFC command:
Of course, when the SFC command was completed but with error that it could not repair
tsgclean.exe I tried to start the essentials dashboard and WS2012 server manager with no luck.
What about the error message? I looked up that file in the explorer and it is located in folder "C:\Windows\WinSxS\amd64_microsoft-windows-tsproxy-edgeadapter_31bf3856ad364e35_6.3.9600.16384_none_2ec8d374a0ac5606"
Why can't it be repaired and what kind of file is that?
Best regards

Problem with Server Pool

Hello,
I have an pool of physical servers at the company that supports the production environment of virtual servers.
This pool have 4 (0, 1, 2 and 3) domain servers.
I recently had a problem with the OVS-AGENT, and had to restart the whole pool.
After that, all virtual servers I start at the pool, using the VM Manager, always start at the same domain server, the domain number 3.
When I force the start using xm create, I can start the virtual server at domain server 0, 1 and 2 too.
The live migration only works with the shell command (xm migrate -l), using the VM Manager simple do nothing.
I try to force an especific virtual machine to run at an especific node, using Placement Policy at VM Manager, but when I try to start the server, this error occurs:
Start - /OVS/running_pool/441_n_psgl04
PowerOn Failed : Result - failed:errcode=20000, errmsg=No enough memory to run vm(/OVS/running_pool/441_n_psgl04), required memory=16384.
StackTrace:
File "/opt/ovs-agent-2.3/OVSSiteVM.py", line 124, in start_vm
raise e
Any idea what's happening? Is that some problem with the ovs-agent's database? How can I fix that with minimum of outage of the virtual servers?
I'm really concerned about this problem because this weekend we had a stop on the network that caused the restart of the cluster, and when the servers came back, all virtual servers started up on the same physical server, which caused a lack of resources.
Thanks for your help, and sorry about my poor english!

843474 wrote:
PowerOn Failed : Result - failed:errcode=20000, errmsg=No enough memory to run vm(/OVS/running_pool/441_n_psgl04), required memory=16384.You don't have enough memory on the target server to start this guest. So, you need to work out why you don't have enough memory or why Oracle VM Manager isn't seeing all your servers. Check to see if all the servers are listed as "Active" on the servers tab of Oracle VM Manager. Also, you can try and restore the ovs-agent database to the entire pool by clicking the "Restore" button on the Server Pools tab.

Problem with server admin connectio

Hi,
Im using Snow leopard server.
I have a problem with connection to server via server admin app. It just says could not connect to server.
At server console there is:
2/27/10 2:58:30 AM com.apple.launchd[1] (com.apple.servermgrd[414]) Job appears to have crashed: Trace/BPT trap
2/27/10 2:58:30 AM com.apple.launchd[1] (com.apple.servermgrd) Throttling respawn: Will start in 10 seconds
2/27/10 2:58:30 AM com.apple.ReportCrash.Root[410] 2010-02-27 02:58:30.829 ReportCrash[410:390b] Saved crash report for servermgrd[414] version ??? (???) to /Library/Logs/DiagnosticReports/servermgrd2010-02-27-025830localhost.crash
And that repeats.
Any ideas how to fix this ?

Yes it did work before. Made some changes to DNS and then server admin lost connection. Server works correctly (dns,mail,ssh access) only server admin connection is lost.
servermgrd is running:
bash-3.2# ps aux | grep servermgrd
root 298 0.0 0.7 2494120 28748 ?? Ss 1:49PM 0:22.16 servermgrd -x
root 1588 0.0 0.0 2425708 276 s001 R+ 2:29PM 0:00.00 grep servermgrd
Is there any way to reset/reinstall servermgrd and its settings to default

Problem with server side cookie

Hi, I have a problem with a server side cookie. I'm trying to store a cookie trough the cl_bsp_server_side_cookie=>set_server_cookie method in the OnInitialitation event handler of a bsp (my bsp application is non mvc) and then to retrieve this cookie trough the cl_bsp_server_side_cookie=>get_server_cookie method in the OnInputProcessing event handler of the same bsp. In this cookie i'm storing a internal table but i'm not getting it when i invoke the get_server_cookie method.
This is the source code that i'm implementing:
OnInitialitation:
wa_comunnication_data-mobile = wa-mobile.
          wa_comunnication_data-telefono = wa-tel_number.
          wa_comunnication_data-email = wa-email.
          APPEND wa_comunnication_data to comunnication_data.
           cl_bsp_server_side_cookie=>set_server_cookie(
              EXPORTING
               name = 'cook_comunnication_data'
               application_namespace = 'NONE'
               application_name = 'NONE'
               username = 'NONE'
               session_id = runtime->session_id
               data_value = comunnication_data
               data_name = 'comunnication_data'
               expiry_time_rel = 720 ).
OnInputProcessing:
cl_bsp_server_side_cookie=>get_server_cookie(
      EXPORTING
       name = 'cook_comunnication_data'
       application_namespace = 'NONE'
       application_name = 'NONE'
       username = 'NONE'
       session_id = runtime->session_id
       data_name = 'comunnication_data'
      CHANGING
       data_value = comunnication_data ).
     READ TABLE comunnication_data INDEX 1 INTO wa_comunnication_data.
regards, marcel.

Why do you need to use cookies in the same BSP Application?
Try to use below:
    username              = sy-uname
    application_name      = runtime->application_name
    application_namespace = runtime->application_namespace
<i>*reward each useful answer</i>
Raja T
Message was edited by:
        Raja Thangamani

Problems with linksys wireless router please help!

Me and my 2 flat mates share a wireless network, and for some reasons if cannot connect to it. I have vista home premium and a belkin dongle. We used a Linksys router to begin with, not sure which model, but we recently had to buy a new one because that did not belong to us. I can see the network so the dongle picks up the signal but every time I connect and put in the network key I either get Not close enough to the net work point (the router is about 5 meters away) The network key is incorrect (I created the password and it works on the other two people lap tops) The network has timed out. Sometimes I can connect to the network for a moment then it kicks me off. The connection wizard shows the network at full signal. I’m not sure what the problem is, I have done a full restore on my computer and the dongle was installed onto my computer via the disc it came with. I do have another dongle that is a Linksys one; however it does the same thing. Not sure what the problem is here, can anyone help before I have to go out and buy long network cable and have wires all over my flat i have a heap of work that needs doing this week so any ideas would be really helpfull

I would first try and bring your computer (if possible) closer to the connection point. That way it will have full time to connect. Also sometimes some materials in the walls mess with connections due to the type of material. Sometimes if your IP address is not quite right you will connect but then get booted offline. Sometimes if you don’t broadcast your ssid you cannot connect. (one of my Visa Networks does this ssid broadcast must be on).
Are you using WPA or WEP because Sometimes WEP is not as stable with some wireless modems/ so changing to WPA might solve your problem
With Knowledge… Impossible means nothing.
Credentials
Computer experience: 11 years
Cisco networks experience: 8 years
Network administrator: 6 years
N.E.T. networks experience: 6 years
Linksys networks experience: 6 years
Recent additions: A+ | Networks+ | Linux+ | Security+

Problem with server behind router

Similar Messages

Maybe you are looking for