WS2012 Standard R2 with Essentials sudden problem with Server Manager, Essential Dashboard and other services

Hi all,
I have a problem with my Windows Server 2012 R2 with Essential installed. When I try to run Server Manager the server manager window doesn't appear and the same thing applies for starting the essentials dashboard. This leads to that some of the features doesn't
work properly like remote web access, client backup and so on. When I check the Services a lot of services haven't even started. Trying to manually start for example Windows Server Essentials Management Services gives me following error message: 
"Windows could not start the Windows Server Essentials Management Services on Local Computer. Error 1068: The dependency service or group failed to start"
What can be wrong here? I haven't done anything to the server that could start these problems. This started all of a sudden. 
Thank you all in advance for any help.
EDIT:
I rebooted my server in safe mode and I tried to run SFC /Scannow which stops at 84% and gives me following message:
"Windows Resource Protection could not perform the requested operation."
I also tried to run "DISM.exe /Online /Cleanup-Image /RestoreHealth". This did not help either. It completes the operation but nothing changes. The problem is still there.
I thought that my server backups were OK and that this problem would be gone by restoring the C: drive with backup image. The problem is that all my good backups was rewritten with new backups that could not take backup of the C: drive for some reason. Now
I need to solve this problem without reinstalling the whole operating system.
EDIT:
I have also completed the chkdsk C: /r command and now the SFC /Scannow command can be completed, with notification that some files could not be fixed. I have attached the sfcdetail.txt file which points out that
"tsgclean.exe" cannot be repaired. What has that file to do with my WS2012 problems...
2015-01-04 03:12:54, Info                  CSI    00000477 [SR] Cannot repair member file [l:24{12}]"tsgclean.exe" of Microsoft-Windows-TSProxy-EdgeAdapter,
Version = 6.3.9600.16384, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch

Hi,
Did you remember any operation which you had done before this issue occurred? For examples, install any update,
install any third-party application or any other? Just a confirmation, thanks for your understanding.
For those problematic services, please open services’ Properties and navigate to
Dependencies tab, then check if all system components which this service depends on run as normal.
In addition, please open Event Viewer and check if find relevant events. Meanwhile, please follow the path:
%programdata%\Microsoft\Windows Server\Logs and check Dashboard log file if find more clues.
By the way, when you run
sfc /scannow command completely, did you open Server Manager or Dashboard again? Any difference?
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected].
Hello Justin,
Regarding the third-party applications:
I have not installed any third-party application that could cause this problem. All my third-party applications that are installed on the WS2012 R2 are confirmed working well with the operative system and are installed at the time when I hadn't these problems.
I cannot say anything about windows update because that is something that I update once in a week after checking that no user is reporting any issues. I have learned my leason with windows update when I had Surface Pro 2, that was a dissaster.
Regarding the Windows Updates:
Anyway, I tried to remove all the windows updates before as well (not the security updates) down to 5th December which is the time when I know that my server worked well. Only two updates could not be removed (KB3012199 and KB2989647). I don't
know if these two updates can cause any problem?
Regarding the problematic services:
For example: Checking the properties for "Windows Server Essentials Management Service" -> It is dependable on
"1. Active Directory Domain Services" and "2. Windows Server Essentials Provider Registry Service".
No 1 is running but not no 2. If I try to start no 2 service it will give me the same message as before:
"Windows could not start the Windows Server Essentials Management Services on Local Computer. Error 1068: The dependency service or group failed to start"
Regarding the Logs:
I have uploaded Dashboard log files which are created after 5th December to my dropbox account: Link
Regarding the SFC command:
Of course, when the SFC command was completed but with error that it could not repair
tsgclean.exe I tried to start the essentials dashboard and WS2012 server manager with no luck.
What about the error message? I looked up that file in the explorer and it is located in folder "C:\Windows\WinSxS\amd64_microsoft-windows-tsproxy-edgeadapter_31bf3856ad364e35_6.3.9600.16384_none_2ec8d374a0ac5606"
Why can't it be repaired and what kind of file is that?
Best regards

Similar Messages

  • How to connect my iphone to iTunes with my imac so i can mannage my songs and other documents on my phone

    how to connect my iphone to iTunes with my imac so i can mannage my songs and other documents on my phone

    Launch iTunes on your Mac, plug your phone in, select it in the sidebar, select what you want to sync under the various tabs, hit the sync button. If the sidebar is not visible, go up to the "View" menu & select "Show Sidebar".

  • I'm having a problem connecting my BlueRay DVD player and other non-Mac devices to my wireless network. Is there a limit on the number of devices I can connect to my AirPort? I never have a problem connecting an Apple device (AirBook, iPad, etc).

    I'm having a problem connecting my BlueRay DVD player and other non-Mac devices to my AirPort Express network. Is there a limit on the number of devices I can connect to the wireless network? I never have a problem connecting a new Apple product (AirBook, iPad) and even a basic laptop. Thanks for your help.

    The AirPort Express Base Station (AX) can support up to ten (10) simultaneously connected Wi-Fi clients.

  • TROUBLE SHOOTING PROBLEM ON SQL*NET, NET8.X, AND NET SERVICES

    제품 : SQL*NET
    작성날짜 : 2002-11-24
    TROUBLE SHOOTING PROBLEM ON SQL*NET, NET8.X, AND NET SERVICES
    (GENERATING TRACE FILE OF SQL*NET, NET8.X, AND NET SERVICES)
    ==========================================================
    PURPOSE
    이 글은 고객들이 Oracle Server의 Oracle Networking 제품들을 사용하다가
    Networking과 관련된 문제를 만났으나 스스로 해결할 수 없는 경우, 예를
    들어 http://metalink.oracle.com 에서 같은 case를 발견할 수 없는 경우,
    원인을 찾기 위하여 Networking 제품의 trace를 떠 보는 방법을 설명합니다.
    Explanation
    Oracle Networking 제품을 사용 중에 어떠한 문제를 겪는 경우 무엇보다도
    OS의 Networking Protocol Stack 쪽을 살펴보는 것이 선행되어야 합니다.
    일부 고객분들은 Oracle Networking 제품들이 OS의 Protocol Stack이 동작
    하는데 어떤 중대한 영향을 주는 것이 아닌가 하고 문의를 합니다만
    그러한 의문은 Oracle Networking 제품도 OS의 Protocol Stack을 사용하는
    하나의 network client라는 것을 이해함으로써 해소가 됩니다.
    Oracle Networking 제품도 OS의 Protocol Stack을 이용하는 하나의 network
    client이기 때문에 Oracle Networking 제품이 OS Protocol Stack의 동작에
    어떠한 식으로든 영향을 준다던가 하는 것은 있을 수 없기 때문입니다.
    고객의 관점에서 OS의 Protocol Stack은 정상적으로 설정이 되었다고 믿고
    있으며 기타 networking 환경을 정확히 판단할 수 없는, 예를 들어
    host설정은 잘 되어 있다고 믿고 있으나 firewall을 통해야만 하는 등의
    다소 접근하기 어려운 networking 환경에서 networking이 잘 되지 않는,
    예를 들어, Oracle Server에 연결이 잘 안되거나 연결 중 networking
    error가 발생하는 경우에는 http://metalink.oracle.com에서 같은 case를
    찾는 것이 가장 빠른 해결 방법입니다.
    그러나 드물게 http://metalink.oracle.com에서 같은 case가 나오지 않는
    경우 Oracle Networking 제품의 trace file을 떠서 원인을 찾게 됩니다.
    Oracle Networking 제품은 Oracle 7.x에서 SQL*Net, Oracle 8.x에서 Net 8.x,
    Oracle 9.x에서 Oracle Net Services라는 이름이 가지고 있으나 여기에서는
    편의상 모두 Oracle Networking 제품으로 부르도록 하겠습니다.
    아울러 여기서 언급하는 Trace File은 Oracle Server의 Trace File과
    다른 것입니다. Oracle Server의 Trace File은 database instance의 대한
    내용만을 기록하며 Oracle Networking 제품의 Trace File은 networking에
    대한 내용만을 기록합니다.
    Trace File의 작성 방법은 Oracle 7.x부터 9.x까지 같습니다.
    Solution Description
    1. Client가 되는 host에서 어떠한 문제를 경험한 경우, 간혹 문제의 발생
    빈도가 낮거나 network나 server 쪽에 이상을 느끼시면서도 문제를 확인하기
    여러운 경우가 있습니다. 이런 경우엔는 문제가 다시 발생될 때 까지
    Client에서 Client Trace File를 작성하여 보아야 합니다.
    a. prompt$ echo $TNS_ADMIN
    b. $TNS_ADMIN이 설정되어 있으면, prompt$ cd $TNS_ADMIN
    아니면, prompt$ cd $ORACLE_HOME/network/admin
    c. vi sqlnet.ora
    # 다음 line들을 추가
    TRACE_LEVEL_client=16
    TRACE_FILE_client=<filename>
    TRACE_DIRECTORY_client=<directory>
    TRACE_UNIQUE_client=TRUE
    :wq
    prompt$
    예를 들어, client가 Windows OS인 경우 다음과 같이 합니다.
    prompt> notepad sqlnet.ora
    TRACE_LEVEL_client=16
    TRACE_FILE_client=client
    TRACE_DIRECTORY_client=D:\temp
    TRACE_UNIQUE_client=TRUE
    prompt>
    d. SQL*Plus와 같은, 또는 사용하던 Client software를 계속 이용
    e. 다시 문제가 발생
    f. 작성된 trace file들의 날자를 보아 문제가 발생한 시간과
    거의 같은 시간에 작성된 file들이 있는지 확인
    prompt> dir D:\temp
    client_<PID1>.trc ...
    client_<PID2>.trc ...
    prompt>
    g. trace를 중단합니다.
    prompt$ vi sqlnet.ora
    TRACE_LEVEL_client=0
    :wq
    prompt$
    h. Trace Assistant를 이용하여 Oracle Networking 제품의 error code
    (이하 TNS error code)를 trace file에서 찾아냅니다.
    prompt$ cd <directory of TRACE_DIRECTORY_client>
    prompt$ trcasst <filename of TRACE_FILE_client>_<PID>.trc > trcasst.out
    prompt$ vi -R trcasst.out
    Trace Assistant (trcasst command)는 Oracle 8.x부터 제공되며,
    Oracle 9.x의 Trace Assistant를 사용할 것을 권합니다.
    i. oerr command로 tns error에 대한 error message를 봅니다.
    예를 들어, 흔한 경우 중에 listener가 실행 중이지 않거나 잘못된
    tnsnames.ora 설정으로 client가 listener가 service 중이지 않은
    network address로 연결을 시도하다가 TNS-12541 TNS-12560 TNS-511
    error가 차례대로 나왔다면 다음과 같이 하여 각 TNS error code에
    대한 message와 설명 및 해결방법을 볼 수 있습니다.
    prompt$ oerr tns 12541
    prompt$ oerr tns 12560
    prompt$ oerr tns 511
    j. Trace Assistant가 알려준 TNS error code를 http://metalink.oracle.com
    에서 검색하여 같은 case가 있는지 확인합니다.
    Web browser에서:
    1) Go to http://metalink.oracle.com, then login
    오른쪽 위 HTML frame에서 :
    2) "Advanced" Button을 누릅니다.
    오른쪽 아래 HTML frame에서:
    3) "Enter Keyword" text box에 tns error code를 모두 입력합니다.
    예를 들어, tns-12541 tns-12560 tns-511
    4) "Search" button을 누릅니다.
    k. http://metalink.oracle.com에서 검색이 거의 되지 않거나
    문제가 매우 이상한 경우 이 글 아래를 보시기 바랍니다.
    2. Client에서 SQL*Plus나 Oracle Client를 사용하는 다른 3rd party
    appliction은 잘 동작하나 유독 tnsping command에서 error가 나는 경우가
    드물게 있습니다. 이 때에는 tnsping command의 trace file을 작성해봅니다.
    prompt$ vi sqlnet.ora
    TNSPING_TRACE_LEVEL=16
    TNSPING_TRACE_DIRECTORY=<directory>
    :wq
    prompt$ tnsping <tns alias>
    3. Server, 즉 listener에 문제가 있다고 생각되는 경우 우선 listener의
    log file을 봅니다. listener의 log에 대해서는 bulletin.18364를
    이용합니다.
    4. listener의 trace file은 다음과 같이 설정합니다.
    listener의 trace 설정은 parameter 이름에 trace file을 작성하고자 하는
    listener의 이름이 오는 점, 설정 후 listener process를 restart해야 하는
    점 두 가지를 제외하면 나머지 절차가 앞서 설명드린 client와 같습니다.
    prompt$ vi listener.ora
    TRACE_LEVEL_<listener name>=16
    TRACE_FILE_<listener name>=<filename>
    TRACE_DIRECTORY_<listener name>=<directory>
    :wq
    prompt$ lsnrctl stop <listener name>
    prompt$ lsnrctl start <listener name>
    5. 만일 위와 같이 http://metalink.oracle.com을 검색하여도
    같은 case가 전혀 없거나 찾아낸 error message들이 원인과 관련이 없어
    보일정도로 매우 이상한 경우 다음과 같이 해봅니다.
    a. Oracle Software의 version과 OS의 version이 certification matrix에
    있는 지 확인합니다.
    Web browser에서:
    1) Go to http://metalink.oracle.com, then login
    왼쪽 menu에서 :
    2) "Certify & Availabilty" menu item을 click합니다.
    오른쪽 아래 HTML frame에서:
    3) 현재 사용중인 Product와 그 version 및 OS와 그 version을 선택하
    여 검색합니다.
    Certification Matrix는 매우 정확하게 정보를 보여주고 있습니다.
    Matrix에 없는 Oracle Product와 OS version은 certify되어 있지 않으며
    모든 Oracle 제품을 Certify되지 않은 OS version에서 사용하는 것은
    그 어떠한 이유로든 보증과 지원이 되지 않습니다.
    만일 사용중인 제품이 certify되지 않은 경우, 무조건 certify된 제품
    과 OS의 version으로 install하여 다시 시도를 해야 합니다.
    예를 들어, Windows OS의 경우 그 어떠한 Oracle 제품도 Windows Me 및
    Windows XP Home Edition에 certify되어 있지 않습니다.
    Windows 2000 Professional 이상에 Certify된 제품은 Oracle 8.1.6부터
    이며 XP Professional 이상에 Certify된 제품은 Oracle 9.0.1부터
    입니다.
    Oracle 제품은 software이기는 하나 매우 완벽한 수준의 제품이라고 할
    수 있습니다. 그러나 Oracle 제품은 하나의 OS의 process로써 실행이
    되고 시간이 지나며 많은 환경이 major upgrade가 되면서 그러한 환경
    에 따라 Oracle software도 새로운 version으로 제작이 되면서 다시
    certification이 이루어지게 됩니다.
    그렇기 때문에 고객들은 특히 다수의 client나 고가의 server를 계획하
    시는 고객들은 저희 certification matrix를 사전에 철저히 확인하셔야
    합니다.
    앞서 Certification Matrix이전에 Installation Guide에 명시된
    OS version만이 certify되어 있다고 생각하시면 되겠습니다.
    b. Unix에서는 Oracle Software를 install한 후 OS의 Networking patch를
    씌우고 사용하다보면 문제가 되는 경우가 있습니다.
    이런 경우 relink를 해주어 바뀐 OS환경에서 Oracle 실행 file들을 다
    시 만들어 주어야 합니다.
    자세한 내용은 http://metalink.oracle.com에서
    다음 글을 읽어 보시기 바랍니다.
    Note:131321.1 How to Relink Oracle Database Software on UNIX
    c. Certify된 환경에서도 원인을 찾을 수 없는 경우 trace file을 가지고
    Oracle Support Services에 문의를 합니다. (지원 계약 고객에 한함)
    Reference Documents
    Chapter 17 Trouble shooting Oracle Net Services
    Oracle 9i Net Services Administrator's Guide
    SQL*Net, Net8.x, Net Services 9.x Network Administration Guide/Reference

    제품 : SQL*NET
    작성날짜 : 2002-11-24
    TROUBLE SHOOTING PROBLEM ON SQL*NET, NET8.X, AND NET SERVICES
    (GENERATING TRACE FILE OF SQL*NET, NET8.X, AND NET SERVICES)
    ==========================================================
    PURPOSE
    이 글은 고객들이 Oracle Server의 Oracle Networking 제품들을 사용하다가
    Networking과 관련된 문제를 만났으나 스스로 해결할 수 없는 경우, 예를
    들어 http://metalink.oracle.com 에서 같은 case를 발견할 수 없는 경우,
    원인을 찾기 위하여 Networking 제품의 trace를 떠 보는 방법을 설명합니다.
    Explanation
    Oracle Networking 제품을 사용 중에 어떠한 문제를 겪는 경우 무엇보다도
    OS의 Networking Protocol Stack 쪽을 살펴보는 것이 선행되어야 합니다.
    일부 고객분들은 Oracle Networking 제품들이 OS의 Protocol Stack이 동작
    하는데 어떤 중대한 영향을 주는 것이 아닌가 하고 문의를 합니다만
    그러한 의문은 Oracle Networking 제품도 OS의 Protocol Stack을 사용하는
    하나의 network client라는 것을 이해함으로써 해소가 됩니다.
    Oracle Networking 제품도 OS의 Protocol Stack을 이용하는 하나의 network
    client이기 때문에 Oracle Networking 제품이 OS Protocol Stack의 동작에
    어떠한 식으로든 영향을 준다던가 하는 것은 있을 수 없기 때문입니다.
    고객의 관점에서 OS의 Protocol Stack은 정상적으로 설정이 되었다고 믿고
    있으며 기타 networking 환경을 정확히 판단할 수 없는, 예를 들어
    host설정은 잘 되어 있다고 믿고 있으나 firewall을 통해야만 하는 등의
    다소 접근하기 어려운 networking 환경에서 networking이 잘 되지 않는,
    예를 들어, Oracle Server에 연결이 잘 안되거나 연결 중 networking
    error가 발생하는 경우에는 http://metalink.oracle.com에서 같은 case를
    찾는 것이 가장 빠른 해결 방법입니다.
    그러나 드물게 http://metalink.oracle.com에서 같은 case가 나오지 않는
    경우 Oracle Networking 제품의 trace file을 떠서 원인을 찾게 됩니다.
    Oracle Networking 제품은 Oracle 7.x에서 SQL*Net, Oracle 8.x에서 Net 8.x,
    Oracle 9.x에서 Oracle Net Services라는 이름이 가지고 있으나 여기에서는
    편의상 모두 Oracle Networking 제품으로 부르도록 하겠습니다.
    아울러 여기서 언급하는 Trace File은 Oracle Server의 Trace File과
    다른 것입니다. Oracle Server의 Trace File은 database instance의 대한
    내용만을 기록하며 Oracle Networking 제품의 Trace File은 networking에
    대한 내용만을 기록합니다.
    Trace File의 작성 방법은 Oracle 7.x부터 9.x까지 같습니다.
    Solution Description
    1. Client가 되는 host에서 어떠한 문제를 경험한 경우, 간혹 문제의 발생
    빈도가 낮거나 network나 server 쪽에 이상을 느끼시면서도 문제를 확인하기
    여러운 경우가 있습니다. 이런 경우엔는 문제가 다시 발생될 때 까지
    Client에서 Client Trace File를 작성하여 보아야 합니다.
    a. prompt$ echo $TNS_ADMIN
    b. $TNS_ADMIN이 설정되어 있으면, prompt$ cd $TNS_ADMIN
    아니면, prompt$ cd $ORACLE_HOME/network/admin
    c. vi sqlnet.ora
    # 다음 line들을 추가
    TRACE_LEVEL_client=16
    TRACE_FILE_client=<filename>
    TRACE_DIRECTORY_client=<directory>
    TRACE_UNIQUE_client=TRUE
    :wq
    prompt$
    예를 들어, client가 Windows OS인 경우 다음과 같이 합니다.
    prompt> notepad sqlnet.ora
    TRACE_LEVEL_client=16
    TRACE_FILE_client=client
    TRACE_DIRECTORY_client=D:\temp
    TRACE_UNIQUE_client=TRUE
    prompt>
    d. SQL*Plus와 같은, 또는 사용하던 Client software를 계속 이용
    e. 다시 문제가 발생
    f. 작성된 trace file들의 날자를 보아 문제가 발생한 시간과
    거의 같은 시간에 작성된 file들이 있는지 확인
    prompt> dir D:\temp
    client_<PID1>.trc ...
    client_<PID2>.trc ...
    prompt>
    g. trace를 중단합니다.
    prompt$ vi sqlnet.ora
    TRACE_LEVEL_client=0
    :wq
    prompt$
    h. Trace Assistant를 이용하여 Oracle Networking 제품의 error code
    (이하 TNS error code)를 trace file에서 찾아냅니다.
    prompt$ cd <directory of TRACE_DIRECTORY_client>
    prompt$ trcasst <filename of TRACE_FILE_client>_<PID>.trc > trcasst.out
    prompt$ vi -R trcasst.out
    Trace Assistant (trcasst command)는 Oracle 8.x부터 제공되며,
    Oracle 9.x의 Trace Assistant를 사용할 것을 권합니다.
    i. oerr command로 tns error에 대한 error message를 봅니다.
    예를 들어, 흔한 경우 중에 listener가 실행 중이지 않거나 잘못된
    tnsnames.ora 설정으로 client가 listener가 service 중이지 않은
    network address로 연결을 시도하다가 TNS-12541 TNS-12560 TNS-511
    error가 차례대로 나왔다면 다음과 같이 하여 각 TNS error code에
    대한 message와 설명 및 해결방법을 볼 수 있습니다.
    prompt$ oerr tns 12541
    prompt$ oerr tns 12560
    prompt$ oerr tns 511
    j. Trace Assistant가 알려준 TNS error code를 http://metalink.oracle.com
    에서 검색하여 같은 case가 있는지 확인합니다.
    Web browser에서:
    1) Go to http://metalink.oracle.com, then login
    오른쪽 위 HTML frame에서 :
    2) "Advanced" Button을 누릅니다.
    오른쪽 아래 HTML frame에서:
    3) "Enter Keyword" text box에 tns error code를 모두 입력합니다.
    예를 들어, tns-12541 tns-12560 tns-511
    4) "Search" button을 누릅니다.
    k. http://metalink.oracle.com에서 검색이 거의 되지 않거나
    문제가 매우 이상한 경우 이 글 아래를 보시기 바랍니다.
    2. Client에서 SQL*Plus나 Oracle Client를 사용하는 다른 3rd party
    appliction은 잘 동작하나 유독 tnsping command에서 error가 나는 경우가
    드물게 있습니다. 이 때에는 tnsping command의 trace file을 작성해봅니다.
    prompt$ vi sqlnet.ora
    TNSPING_TRACE_LEVEL=16
    TNSPING_TRACE_DIRECTORY=<directory>
    :wq
    prompt$ tnsping <tns alias>
    3. Server, 즉 listener에 문제가 있다고 생각되는 경우 우선 listener의
    log file을 봅니다. listener의 log에 대해서는 bulletin.18364를
    이용합니다.
    4. listener의 trace file은 다음과 같이 설정합니다.
    listener의 trace 설정은 parameter 이름에 trace file을 작성하고자 하는
    listener의 이름이 오는 점, 설정 후 listener process를 restart해야 하는
    점 두 가지를 제외하면 나머지 절차가 앞서 설명드린 client와 같습니다.
    prompt$ vi listener.ora
    TRACE_LEVEL_<listener name>=16
    TRACE_FILE_<listener name>=<filename>
    TRACE_DIRECTORY_<listener name>=<directory>
    :wq
    prompt$ lsnrctl stop <listener name>
    prompt$ lsnrctl start <listener name>
    5. 만일 위와 같이 http://metalink.oracle.com을 검색하여도
    같은 case가 전혀 없거나 찾아낸 error message들이 원인과 관련이 없어
    보일정도로 매우 이상한 경우 다음과 같이 해봅니다.
    a. Oracle Software의 version과 OS의 version이 certification matrix에
    있는 지 확인합니다.
    Web browser에서:
    1) Go to http://metalink.oracle.com, then login
    왼쪽 menu에서 :
    2) "Certify & Availabilty" menu item을 click합니다.
    오른쪽 아래 HTML frame에서:
    3) 현재 사용중인 Product와 그 version 및 OS와 그 version을 선택하
    여 검색합니다.
    Certification Matrix는 매우 정확하게 정보를 보여주고 있습니다.
    Matrix에 없는 Oracle Product와 OS version은 certify되어 있지 않으며
    모든 Oracle 제품을 Certify되지 않은 OS version에서 사용하는 것은
    그 어떠한 이유로든 보증과 지원이 되지 않습니다.
    만일 사용중인 제품이 certify되지 않은 경우, 무조건 certify된 제품
    과 OS의 version으로 install하여 다시 시도를 해야 합니다.
    예를 들어, Windows OS의 경우 그 어떠한 Oracle 제품도 Windows Me 및
    Windows XP Home Edition에 certify되어 있지 않습니다.
    Windows 2000 Professional 이상에 Certify된 제품은 Oracle 8.1.6부터
    이며 XP Professional 이상에 Certify된 제품은 Oracle 9.0.1부터
    입니다.
    Oracle 제품은 software이기는 하나 매우 완벽한 수준의 제품이라고 할
    수 있습니다. 그러나 Oracle 제품은 하나의 OS의 process로써 실행이
    되고 시간이 지나며 많은 환경이 major upgrade가 되면서 그러한 환경
    에 따라 Oracle software도 새로운 version으로 제작이 되면서 다시
    certification이 이루어지게 됩니다.
    그렇기 때문에 고객들은 특히 다수의 client나 고가의 server를 계획하
    시는 고객들은 저희 certification matrix를 사전에 철저히 확인하셔야
    합니다.
    앞서 Certification Matrix이전에 Installation Guide에 명시된
    OS version만이 certify되어 있다고 생각하시면 되겠습니다.
    b. Unix에서는 Oracle Software를 install한 후 OS의 Networking patch를
    씌우고 사용하다보면 문제가 되는 경우가 있습니다.
    이런 경우 relink를 해주어 바뀐 OS환경에서 Oracle 실행 file들을 다
    시 만들어 주어야 합니다.
    자세한 내용은 http://metalink.oracle.com에서
    다음 글을 읽어 보시기 바랍니다.
    Note:131321.1 How to Relink Oracle Database Software on UNIX
    c. Certify된 환경에서도 원인을 찾을 수 없는 경우 trace file을 가지고
    Oracle Support Services에 문의를 합니다. (지원 계약 고객에 한함)
    Reference Documents
    Chapter 17 Trouble shooting Oracle Net Services
    Oracle 9i Net Services Administrator's Guide
    SQL*Net, Net8.x, Net Services 9.x Network Administration Guide/Reference

  • Hi, my macbook 13" retina [a week old] keeps having problems where the keys/trackpad freeze and other times OS crashes itself. has anyone found/been given a solution? i cant get an applecare appt for 2weeks.

    hi, my macbook 13" retina [a week old] keeps having problems where the keys/trackpad freeze and other times OS crashes itself. has anyone found/been given a solution? i cant get an applecare appt for 2weeks.

    Book your Apple appointment now, in the mean time you can try a SMC reset.
    http://support.apple.com/kb/HT3964
    1 week old !, call Apple and tell them you need a priority appointment at a genius bar.
    http://www.apple.com/support/contact/
    http://www.apple.com/retail/
    1-800-692-7753
    Explain that he MBP is 1 week old, and you need it ASAP, they seem to be very responsive to these kind of issuses.
    All the best

  • Sudden problem with iTunes quitting - problem and solution

    This is a fairly lengthy diatribe but it was driving me nuts and so hopefully will help someone else:
    The Problem:
    I have an XPS M1710 running Windows Vista. A couple of days ago all Apple programs started to malfunction, specifically iTunes, QuickTime. When I try to start iTunes it quits immediately and I get the message “A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available”. The same thing happens with Quicktime. When I go to Internet Explorer this works fine until I go to the Apple website and try to Download iTunes (to reinstall) or even to go to the Apple Support page, Then the Apple site seems to “force” IE to quit. The same thing happens when I use the Apple Safari Browser (works generally but quits on Apple iTunes or support site). I am not sure if it is relevant but we bought some iTunes songs online in the last couple of days using another laptop. That machine is still working fine as are two other laptops in the house re iTunes (they are Windows XP Dells, my machine is Windows Vista). I received an email receipt on my XPS for the purchases in the usual fashion. I can open it, but when I click the links to the iTunes site it doesn’t work (does work using other computers).
    I have performed 2 system restores (to 2 and 4 weeks ago – long before the current problem) but this did not help. I have uninstalled iTunes – but even so still could not directly download the iTunes setup.exe from Apple. I did eventually get it from a third party link. Using the downloaded file I reinstalled iTunes but exactly the same problems persist. On one occasion I let the “A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available” dialogue box sit for a while – the system identified some Apple updates needed which I downloaded and installed (in fact I had done these probably a week or so ago anyway but the system restore would have reverted that). This still did not fix the problem.
    Today I phoned XPS support. I was initially told to leave my number and someone would call me back. 2 hours later no-one had so I phoned again and got someone who suggested doing a full scan disk (ie by getting into diagnostics at startup by pressing F12). I did this – no problems found. The person had also suggested trying to access iTunes using a different logon account. I switch on “guest” account and tried from there but the same problem persisted.
    I have checked Windows Defender and Windows Firewall and as far as I can see iTunes is allowed to access the internet. No sign that it is deliberately blocked. As far as I can tell from the Windows updater the system is up to date (as it was when the problem first happened, and not fixed by rolling back many updates via the system restores).
    I have run a full Virus check using Kaspersky (with latest updated database) and nothing was found.
    So, no matter what I try, my computer is suddenly blocking everything to do with iTunes (and Quicktime), including Apple’s own support site. The failure of iTunes or QuickTime to launch happens whether or not I am connected to the Internet at the time. All other programs seem to be working.
    I would be very appreciative if you could help. I have been unable to find any online solution, although one person may have had a similar problem, no resolution was evident.
    The solution:
    I have only just now solved the problem (two weeks down the track). The Dell technician that I spoke to over the phone tried hard but we could not get the issue solved completely, although the problem with accessing the iTunes website we did solve by turning off some internet explorer add-ons. As it turned out the problem was with QuickTime. The clue was that although I had attempted to uninstall iTunes + Quicktime many times the QuickTime component never disappeared. So when I reinstalled iTunes + QuickTime (which I did many times) the problem remained. After again uninstalling iTunes + QuickTime (by going to control panel, selecting iTunes and uninstall, then QuickTime and unintstall in the usual way, and realising that QuickTime did not uninstall properly, I then selected QuickTime and chose the "repair" option at the top of the control panel dialogue box instead of uninstall. After that I was then able to open QuickTime properly, and then when I reinstalled iTunes it worked! This had been driving me nuts, and I was on the verge of re-installing the operating system. Can I suggest that you enter this solution into your database for future reference.

    I was wondering if you ever fixed this problem? Today I went to open itunes and it started installing it and said it couldn't access the file ja.lproj/ea0423.rtf which would be the Japanese language version. I just wanted to know if I should do what was suggested to you or if that didn't work.

  • Sudden problem with Flash Player right now?

    Hello,
    we're currently got a problem with our Flash video player suddenly stopped working, just this evening. We havent touched it anything in a few days, and now suddenly our player does not start. The debug-version of the player outputs this:
    Warning: 'flash' has no property 'prototype'
    Error #2046: The loaded file did not have a valid signature.
    Failed to load RSL http://fpdownload.adobe.com/pub/swz/flex/4.0.0.10485/textLayout_4.0.0.10485.swz
    Failing over to RSL textLayout_4.0.0.10485.swz
    Warning: Ignoring 'secure' attribute in policy file from http://fpdownload.adobe.com/pub/swz/crossdomain.xml.  The 'secure' attribute is only permitted in HTTPS and socket policy files.  See http://www.adobe.com/go/strict_policy_files for details.
    Error #2046: The loaded file did not have a valid signature.
    This player have been working perfectly fine for multiple browsers/OS'es/people the last week,and now suddenly this evening we suddenly get this problem, without any changs from our end (our player checksum matches the known file).
    Any ideas, what is going on here?
    Best regards
    Johan

    Hi, I just noticed your thread. There may be info on one of these forums. I have not seen any report of Flash Player issues here and I was on line late last night.
    http://forums.adobe.com/community/flex
    There are several forums listed there.
    Thanks,
    eidnolb

  • Sudden problem with fill layers

    I use Adobe Photoshop Elements 11.  Until recently, I've had no problem with fill layers.  I'd make a selection from the photo, then I'd make a layer of the selection, then I'd go to edit, fill layer, fill with background/foreground color.  Then the selection only would be filled.  Now, all of a sudden, I make the selection, make a layer of the selection, go to edit/fill layer/fill with background/foreground color, and the whole photo becomes filled with the fill color, and not just the selection.  I'm always on the selection layer, not the background or any other layer.  I've reset all the tool defaults, and I've even deleted the defaults file, but to no avail.  What's happening here?  How do I fix this?
    Thanks,
    Sue

    Sue and MichelB
    MichelB
    When I tried to help Sue with the inquiry, I was doing so based on what was written and my interpretation of it
    then I'd go to edit, fill layer, fill with background/foreground color.
    For me that Photoshop Elements 11 Full Editor, Edit Menu/Fill Layer and the issue did not fit.
    But if the route were as you have suggested Photoshop Elements 11 Full Editor, Layer Menu/New Fill Layer/Solid Color then everything would fall into place, centering around that option in the New Layer dialog "Use Previous Layer to Create Clipping Mask" being checked or unchecked.
    Sue
    We look forward to your follow up.
    Thank you both.
    ATR

  • SUDDEN PROBLEMS WITH 3G

    HAVE HAD THE 3G FOR ABOUT 8 MONTHS AND HAVE NOT HAD ANY ISSUES. HERE THE LAST 3 WEEKS ALL OF A SUDDEN I WILL HAVE 2 OR 3 DAYS WITH DROPPED CALL ALL DAY LONG THEN IT WILL WORK FINE FOR A COUPLE OF DAYS. GOT MY BATTERY ISSUES WORKED OUT AND HAVENT HAD ANY PROBLEMS. TALK ON MY PHONE ON AVERAGE ABOUT 3 TO 4 HOURS A DAY FOR WORK WITH BLUETOOTH BATTERY LAST ALL DAY NO PROBLEMS RECHARGE AT NIGHT. THEN ABOUT A WEEK AGO ALL OF A SUDDEN MY BATTERY WONT LAST UNTIL NOON AND HAVE TO RECHARGE THEN IT MAY LAST AN HOUR.THIS WENT ON FOR ABOUT 5 DAYS THEN IT WORKED FINE SUNDAY THEN BACK TO THE SAME PROBLEM TODAY. ANY ONE HAVE A CLUE? DID ALL THE LITTLE BATTERY TRICKS AND TIPS WHEN I FIRST GOT THE PHONE.
    HELP PLEASE?
    Message was edited by: stimebrown

    The first step is to fix your keyboard and turn the cap lock key OFF. We're users like you and don't appreciate being screamed at.
    Things you can try:
    1) Let the battery drain all the way and fully recharge it to recalibrate the battery.
    2) Reset (hold the sleep/wake & home button until the Apple logo appears
    3) Restore in iTunes.

  • Strange and Sudden Problem With Ipad and Itunes

    Hey all, have been searching online and haven't found an answer to this problem... so any help would be very much appreciated!
    My girlfriend's father gave us an IPad as a very generous present several months ago. He had hooked it up to his computer to play with it a bit before handing it over, so of course his ITunes info was present when I plugged it into my computer. No problem: I went into the setting and changed everything, sync'ed it up, etc.
    No problems until last week.
    I saw I needed to update some apps. I went into the Ipad's App Store. It prompted me for my ITunes username and password. I entered it, and it let me continue. I went to update my apps, and it prompted me a second time: this time suddenly asking for my gf's father's password!
    I have never had this problem before (use the ipad all the time, etc). As far as troubleshooting, I have so far:
    1) Gone into the ipad settings, signed out of my username, signed back in, etc.
    2) Signed out of the IPad's itunes in settings, gone into my computer's Itunes and signed out... then plugged Ipad into computer and signed back in to both Itunes at the same time.
    But still, the same thing happens.... prompts me for MY itunes password upon just entering the App Store.... then asking for my gf's father's password the moment I try to download something.
    Any help would be very much appreciated! Thanks in advance!

    In order to resolve this, you need to do the following:
    1) Go back to your girlfriend's father's computer where the iPad was first synced.
    2.) Plug the iPad in to the computer.
    3.) Sign out of your dad's iTunes Store account via iTunes.
    4.) Then, reboot the iPad.
    That should fix the issue.

  • Sudden problems with image behaviors, javascript on Yahoo servers

    I have been posting my website with Yahoo Small Business for 10 years and have never had a server-side issue (to my knowledge).  Until now.
    It should first be pointed out that all my sites are basic HTML, constructed using Dreamweaver 8 on an old Sawtooth PowerMac that runs OS X.3.8.  I am behind the times and know it. 
    I have a 2011 iMAC, but can't afford to upgrade my imaging software.  If adobe cared anything about aspiring designers, they would come down to earth with the pricing (why should current students, educators and private business be given such a massive advantage in pricing?).  Sorry, I'm just being truthful.  I do not use style sheets (though it would be helpful to learn since the web is run by them now).
    Recently, I completely redesigned my personal website.  When I tested it on my old mac, everything functioned as desired.  When tested on my new mac, everything functioned as desired.  When viewed online after uploading to the server, the page appears to load in full, but none of the image behaviors work.  Correction, the "mailto:" link works, but it was assigned in the property inspector rather than the behaviors inspector.  So I have no rollovers and no operative links beyond email.
    I sent the site files to a friend so he could check the site.  He posted it to the server he uses and all the functions on the page work correctly.  This is where I came to suspect that the problem is with the Yahoo servers and not my coding.
    Here is the link to the page that does not work correctly:
    http://www.boughnermultimedia.com
    Here is the link to the page that does work correctly:
    http://www.ericsearsandeyes.com/fboughner
    In Safari, I checked the error console and the following message appears for all java script behaviors:
    ReferenceError: Can't find variable:
    If someone here could check my source code and let me know where Yahoo is having problems with my code, it would be greatly appreciated.
    Thanks.

    Your code is corrupted.  If you view source in browser, you'll see your code is compressed into one long line. This will surely cause JavaScripts to fail.
    Your friend's version works because the code is not compressed.
    In DW, go to Edit > Preferences > Code Format >
    Which Line Break Type are you using? 
    Nancy O.

  • Sudden problem with lxde panel

    im not sure what i did, but this problem seems to have popped up out of nowhere......when i start lxde, the panel keeps flashing, cant click on anything, wondering whats going on with it, if anyone knows

    oni5115 wrote:
    ssl6 wrote:
    there was something in that thread about modifying a line in a config file, the orignal line is lxde --profile LXDE........which basically tells it to load a profile from ~/.config/something/something/LXDE. i wiped that folder rather than change the config, i think the folder was rebuilt with a new default profile, and i just reconfigured my settings
    sorry i cant be more usefull at the moment. im not near the machine i have with LXDE
    Wiping the config file and re-configuring seems to solve this problem.  At least, once I fixed it I have not seen it come back again.
    I did this also when I had problems with the menu not working and causing my panels to reset.
    So far a great fix. Now panels are back to normal. I will edit if problem shows itself again.

  • Sudden problems with Exchange 2010

    Hey folks,
    my organization recently updated our Exchange server from 2003 to the 2010 version. After the upgrade, Exchange access via Mail, iCal and Address Book was at last possible; didn't work before for whatever reason.
    Which is now the case again, after our admin updated the Exchange Firewall ("Threat Management Gateway 2010", I was told) and installed Service Pack 1 for the 2010 Exchange Server. He doesn't know if there were any settings changed which might have broke access through OSX apps, and I couldn't find explicit hints on what to look for in order to regain it.
    Anybody here with similar problems?

    The problem was a missing exception in the firewall. Up and working again.

  • Serious and Sudden Problem with Z10 NEED HELP PLEASE

    I have a z10, one of the first that came out in Toronto (if it makes a
    difference), a couple of hours ago I came across a serious and sudden
    problem.
    I was able to swipe left and right between pages of apps, even drop down
    from the top, but I cannot open anything, not even make a call or settings
    options.
    Any time I try to, for a split second it looks like its about to load
    something then nothing. (image slides to the right quickly and goes back on
    every attempt)
    So I first did a reset, same problem, then I did a battery pull (about 15 minutes) and problem presisted.
    I tried through USB to do a backup on blackberry manager and perhaps do a
    re-install of everything, however when I was prompted for the password of
    my device on my PC it kept telling me it was an incorrect password (I use
    this blackberry on my computer 4-7 days a week, twice a day sometimes for a
    year and I have never miss typed my password nor have i changed it)
    After trying everything to make sure the first letter maybe was upper/lower
    case, even my other possible phone password, nothing worked..
    On the 5th failed attempt my phone prompted me to type 'blackberry', which
    i did, then i typed my password on my phone which i type in about 15 times
    a day becuase I set my phone to a 5 minute lock and still said it was incorrect.... I am no on 9/10 attempts and lost
    for options.
    Please if anyone can give me any suggestions, or even how to backup my phone
    and whipe it now, or I have an earlier backup form 4 months ago that I
    wouldnt mind going back to in worst case scenario.
    Thank you for your help in advance,
    Solved!
    Go to Solution.

    Sorry, no I haven't experienced that. It could be from an app you downloaded but that's just a guess. Wiping the device will tell us a lot. If the device still doesn't work you'll want to reload the OS using BB Link. if it still doesn't work after that then warranty support will be necessary through Rogers.
    1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
    2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

  • Sudden problems with importing/editing audio files

    I podcast my lectures, which run about 1 hr 15 mins. My SOP was to drag and drop an mp3 or AAC version of the original audio capture into Garageband and then split the file into two separate podcast episodes. Since the big Apple Software upgrade, however, this procedure doesn't seem to work. The file imports and plays, but I can no longer split it into multiple regions (it also shows a flat line for the entire track). Any ideas?

    I am having the same problem. Looking for a fix and will post as soon as possible. This all happened after the new software update.
    M

Maybe you are looking for

  • I am trying to do voice over of my clips

    Hello. I am trying to do voice over for my clips, but when I use the voice over tool, the audio is really low - unusable. I just need a way to use a mic through a Mackie to capture my voice over.

  • How can I use the hardware compare feature of the 6551 card to trigger scripts

    I can dynamically and seamlessly generate different waveforms by triggering different scriptTriggers that drive one or more of the 4 PFI lines. However, I need to evaluate a channel at a specific location or locations set by a script marker in real-t

  • Dynamic file name within 1:n mapping

    Dear all, I have a 1:n mapping and would like to use dynamic file names. I searched the forum but found just some few anserws. As far as I can determine, it is not possible to use dynamic file names for multiple target messages, right? We are using a

  • Need help recreating this in Oracle (Temporary Table and a Cursor)

    Hey all, My client has asked me to see if it's possible to move his SQL Queries into Oracle, and then move EVERYTHING off of MSSQL into this new oracle environment. The problem is, I wrote the entire MSSQL system, and i know nothing about Oracle. Bas

  • Final Cut Pro 4.5 HD crashes when I want open project

    Hello ! I have a problem with Final Cut Pro 4.5. (G5 - Mac OS X 10.4.11 Tiger) When I want to open a project, FCP crashes (but I can open and create other projects). Clarification, when I was under MAC OS X Panther all was well. This is since my MAC