Problem with Software update and n70 Branded Tim

Excuse me just before for my no fluenty english.
I'd tried to flash my phone N70 Fw. v2.x branded 3 Italy to new version 5.x branded 3 Italy and all have finish ok, but
when i'd tried to flash my N70 fw. v3.x branded TIM to new fw 5.x the flash was ok but the Themes, the screen saver, and the multimedia button wasn't correctly installed.
When i went to change themes i can see one theme called TIMN70_2nd.skn but the option for it is delete it or exit.
If i try to delete it not work..
I want my old screen saver, desktop and theme of TIM branded
Can anyone help me?
It's a problem of firmware or Software Update?

For this me workied perfect, hope you get yours updated properly too! I just noticed this: http://discussions.europe.nokia.com/discussions/board/message?board.id=swupdate&message.id=451 Maybe it's good idea to post your product code here and retry in few days?

Similar Messages

  • Problem with software update and restore section in iTunes

         Recently i have had this problem with iTunes. I cannot check for updates or restore. These sections have been greyed out. I have tried everything. Rebooted my device, reinstalled iTunes, downgrade iTunes, i have tried it on other computers. Nothing seems to work. Please help me out here.

    For this me workied perfect, hope you get yours updated properly too! I just noticed this: http://discussions.europe.nokia.com/discussions/board/message?board.id=swupdate&message.id=451 Maybe it's good idea to post your product code here and retry in few days?

  • HT4993 problem with software update

    I need help how to reslove problems with software update on my iphone 4s.

    Reset your device and try it again: hold down the home button along with the sleep/wake button until you see the apple, then let go.(No data loss)
    Also make sure you have enough free space on the device for the update file - usually requires 2 to 3 times the actual size of the file to be able unpack & install.

  • Had a problem with newest update and the advice from turingtest2 resolved my problem just to say thanks! Had never used this route before so was less painful than thought it would be again thanks.

    Had a problem with newest update and the advice from turingtest2 resolved my problem just to say thanks! Had never used this route before so was less painful than thought it would be again thanks.

    how can i find out what the fix is that works..please

  • Do firmware updates come with Software Update and installed automatically?

    Do firmware updates come with Software Update and installed automatically?

    Do firmware updates come with Software Update
    Yes.
    and installed automatically?
    No (at least, I can't think of one that has automatically run). Usually Software Update will download an updater that you then need to run separately. Usually the updaters will be installed to the Utilities folder ready for you to use.

  • HT1338 I have a problem with the calendar and notifications, every time I dismiss or snooze locks up and hangs, just reboot goes.

    I have a problem with the calendar and notifications, every time I dismiss or snooze locks up and hangs, just reboot goes.

    Have you run Disk Utility/Repair Permissions and/or deleted the .plist from your user library To see the user library, hold down the option key while using the Finder Go to Folder command.

  • Problems running Software Update and Disk Utility

    I had automatic updating turned on in the Software Updates control panel, so I believe the system tried to apply the 10.4.6 automatically and somehow failed.
    Ever since, when I try to run Software Update it hangs while trying to connect to the internet to get the list of available updates. I tried downloading the installer directly from Apple, but when I try to select a volume on which to install the update, it doesn't list my hard drive.
    Finally, when trying to run the Disk Utility, I get an error about how the Disk Utility cannot be started because a background process is not running. I have to Force Quit to exit out of the Utility.
    I was able to boot off the Mac OS X 10.4 installation DVD at which point I repaired the permissions and repaired the disk. However, upon restart the same problems remain.
    I've seen several other people post about this issue; has anyone found a resolution OTHER than doing an Archive and Install (which I don't want to do if I don't have to?)
    Thanks so much for help that anyone can provide!
    iBook G4   Mac OS X (10.4.5)  

    Create a new admin account with Apple menu -> System Preferences -> Accounts and see if the issue duplicates itself logging into that account. That will say if the issue systemwide, or just localized to the a bad user cache file. If the issue persists in the new user, you can try looking in the System -> Library and Library -> Cache, Applications Support, and ByHost folders for cache files relating to Software Update and Disk Utility. Once you find them, carefully extract them to comparable folders on your desktop you create (i.e. name one systemlibrarycache) so you know where you go them from, and restart your Mac. If the issues go away after two restarts then it is just one set of bad cache files. If the issues return after two restarts, you have something generating bad cache files which needs a more system wide repair tool.

  • HT4461 How can I cancel a download once it starts? I started a download with software update and decided I don't want it. I can pause the download, but I want to cancel entirely

    I started to download from software update and decided I don't want the items after the download had begun. How can I cancel a download? I don't want to just pause it, I want it to GO AWAY. I don't want it to resume any time ever.

    Hello cranky71,
    Unrelated, for anyone curious.     The following link may help to solve your problem.
    Mac App Store: Buy, download, and install apps
    Regards.  71.

  • Problems with windows update and fingerprint

    HI
    My windows was out of date and in the coarse of trying to update it, the system runned into a problem and the only way i could get back my information was to let the system settings go back to its default settings. Following that, i find it difficult to download new updates and the fingerprint is also not working any more. Please what should i do ?

    Hi @CLEPRIS ,
    Thank you for visiting the HP Support Forums and Welcome.It is a great site for information and questions. I have looked into your issue about your HP-ENVY m6 Notebook and issues with Windows Updates and the Fingerprint reader software. Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers that might need updating on your system.
    It shows me that there seems to be interference with Software task, usually your virus protection.
    You might have to disable this software and then run the Windows update.
    I would suggest to uninstall HP SimplePass and reinstalled the latest version for Windows 8.1.
    I would be happy to assist if needed. How Do I Find My Model Number or Product Number?
    I hope this fixes things up for you.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Problem with software update version 6.0 Bundle 2333 and email.

    I'm having a problem updating my blackberry bold 9650 with the new service update that came out a couple weeks ago. I left the US for Germany about 3 weeks ago and a couple days after arriving the software update popped up. For whatever the reason, I am unable to load the new update. Neither the 3G service nor connecting to wifi allows me to complete the update. It keeps telling me it can not connect. Now I'm having a problem with my email all of a sudden, as the email icon has disappeared. Whenever I try to reset up my email (which it tells me I need to do) it says I have to do the software update first. Which puts me in quite the dilemma. Apparently no update = no email, which I can not have. Unfortunately I forgot to bring my computer cord to sync my phone, and I really do not want to have to wait until August when I get back to the States to update my phone and have email again. 
    Any help would be greatly appreciated. Thank you. 

    My assumption is that since you're not on the Verizon network currently and you don't have access to the network, you can't OTA the update.
    And since you don't have the USB data cable, you won't be able to connect your phone to your computer to update.  My best suggestion... Get a data cable. There should be someplace nearby you in Germany where you can get an inexpensive data cable.
    Then go about backing up your phone with the desktop manager and then update via the DM as well.
    No, you can't be on TV.
    Yes, this camera is heavy..
    Go bother the reporter...I'm busy!!

  • Backlight problem with software updat 1.1 for neno

    the new 1.1 software update of 'iPod Updater 2006-01-10' for neno stuffs up the backlight. if i leave the light in always off or always on and try to use (press and hold) menu button to manually switch on and off the back light DOES NOT WORK any more....
    apple pls fix it asap...

    heres wats new with 1.1-
    1. holding menu will take you to the main menu instead of activating or deactivating the backlight
    2. lyrics and album art staying on screen and not disappearing after 10 seconds
    3. Apple Radio Remote support
    4. Line-out problem, occasionally when going from headphones to line-out, there would be no sound.
    5. The 'Alarm' feature has been overhauled, easier to set the time, and a little bell icon is displayed next to the 'Alarm' menu item when it is set.
    6. 'Screen-lock' has also been changed, slightly different interface, the numbers are in sunken boxes as opposed to the red glow. And a new warning is given telling you to hook your Nano up to your comp if you forget your code.
    7. There was a problem with turning off, if you scrolled back or forward through a playlist/album, back to the main menu, sometimes it would not turn off.
    8. The song title is in bold above the lyrics when you go to the lyrics screen
    9. itunes opens almost instantly (within a second or 2) with the ipod showing. Before, this used to take 5-10 seconds, maybe more.
    10. Reduced lag, before, when scrolling and clicking quickly through menus and songs, had some 'slow down', this is gone now.
    11. Before the update I noticed a lag when I would skip songs, the next song would come on but the tags would have a slight lag on them and that has been fixed as well.
    12. More accurate battery meter. Doesn't go down too quickly as it used too. One person said that it actually increases battery life after a testing.
    13. When using the Universal dock with remote the backlight will come on after you change the volume, before the backlight remained off.
    Nano 4GB black,Moto RAZR V3 black, PSP, all kinds of cases for nano,radio/remote   Windows XP   <img src="http://i36.photobucket.com/albums/e13/superman5656/s.gif"align="right"</span>

  • Compressor problems with software update

    Software update has downloaded and installed once or more every day since last week thursday!
    nothing works, the software update installs 2.01 compressor and QTmaster over and over again.
    DVD Studio Pro is a mess...
    How can I make software update wasting my time and bandwidth?
    Message was edited by: Host

    I was experiencing this same problem with the 3.02 update. It look like I was finally able to resolve it by manually downloading the compressor update and installing it instead of using software update. I only made the change today, but so far software update seems to recognize that I'm up-to-date.

  • Problem with software update - now can't log on to administrator account

    Hello -
    I updated software yesterday and didn't pay attention to what was updating. I always just install the updates when they come up.
    Now I can't login to my administrator account or change the password. I could log into another account, but iTunes won't stay open. It opens for about 10 seconds then closes.
    So I'm assuming that the updates were a mac OSX update and an iTunes update.
    Does anyone know why this is happening and how to fix?
    Is there anyway to "undo" the most recent update?
    Any help would be appreciated.
    -jamendan

    Hi jamendan, and a warm welcome to the forums!
    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
    5. Select your Mac OS X volume.
    6. Click Repair. Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    The usual reason why updates fail or mess things up, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions.
    Some people get away without Repairing Permissions for years, some for only days.
    If Permissions are wrong before applying an update, you could get mixed OS versions, if Directory is the slightest messed up, who knows!
    If many Permission are repaired, or any Directory errors are found, you may need to re-apply some the latest/biggest updates.
    May even need to do an Archive and Install if you have room on the HD...
    http://docs.info.apple.com/article.html?artnum=107120
    I only use Software Update to see what is needed, then get them for real via...
    http://www.apple.com/support/downloads/
    That way I can wait a week or so, check the forums for potential problems, and get Permissions & such in order before installing.

  • Problem with IOS8 update and my 2013 Honda Accord

    Updated my iPod touch with IOS8 and now it acts weird while connected to the stereo of my 2013 Honda Accord with a USB cable.  When I start the car and set the stereo to iPod, it will grab a random song from the iTunes Library and start playing it.  I can manually change the music on the iPod but the stereo display still shows the random song title and none of the stereo controls (including those on the steering wheel) will control the iPod.  The random song title will stay on the stereo for a  random length of time.  I will be changing the music selection from the iPod and all of a sudden the stereo display will show the correct song and the radio controls will work.  Something is missing here regarding the communication between the car stereo and the iPod.  Anyone hear of a Honda software update to work out the bugs?

    Contact Honda. Sometimes an IOS update breaks compatibility
    Also sometimes this helps:
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync/delete all music and resync
    To delete all music go to Settings>General>Usage>Storage>Music>Tap edit in upper right and then tap the minus sign by All Music
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       

  • Having problem with software update

    Hello,
    I am having problem with reinstalling my software with Nokia Suite. It shows while backing up the data that phone memory is full. However already I have exhausted all the options for freeing phone memory. 
    I need to reinstall my software as my mobile phone is causing some problem.
    I have Asha 305 phone. Kindly reply back if you could help me.
    Regards,
    Ayush Sharma

    Hello @poochini21 ,
    Thanks for replying. 
    The reason i wish to reinstall software in my cellphone because of 'deletion of certificates'. It shows a 'Certificate Invalid, Check date and time settings'. Furthermore, my nokia browser has restored to its default version. And the mail does not work.
    Re backup: I am unable to create backup following the mentioned instruction, it again pops the memory issue. 
    I have already tried to reset my mobile, both the settings and the full reset, which at maximum saves me a free phone memory of 6.0 MB. Moreover I have also tried the option in Nokia Suite, 'Free some space'. That too could not help me out.
    If you can help me out, kindly reply.
    Thanks and Regards,
    Ayush Sharma
    poochini21 wrote:
    Hi ayushmnit,
    Just to clarify, the main reason why you'd like to reinstall the phone's SW via Nokia Suite is due to the memory full error that you're getting, is that correct? Do you also get the same error when creating a backup file using the phone itself? In your Asha 305, try going to Settings > sync and Backup > create a backup. A memory card is required to do this. 
    BTW, is resetting one of the steps you did to free more phone space? If the phone backup process succeeded, try resetting your phone by going to Settings > Restore factory settings. You can select Settings only to just restore the defaul settings, or Restore all to wipe out all your personal data which could free more space in your phone. After the reset, try reinstalling the phone's SW via Nokia Suite and see your Asha 305 will work fine afterwards.
    Let us know how it will go. 

Maybe you are looking for