Problem with some features after changing memory c...

My N2690 cannot work with 2GB. Right now most of the functions like; Ovi, Life tools, Web browser is refusing to open.
Community Manager note: this post has been removed from an unrelated thread and the subject line changed to reflect the nature of the question.

Problem Solved! 
I discovered how to locate earlier versions - I my case had to go back 3 versions of HotKey fix. For my laptop, T60 2007-49U, the latest version is 3.86.0000 - I found that 3.84.2000 restored both audio & brightness levels on screen display.
One point though, my previous display was a series of green bars - the new display is a black bar with white characters... no real problem - at least the On Screen Display is back! 
Thanks for your help in suggesting I try previous versions.

Similar Messages

  • Problem with some apps after upgrade to 5.1 (can I downgrade it to 5.0 ??)

    Dear all,
    I'm experiencing some problems with apps after upgrading to 5.1, some of them just got stucked or not even start up. Is there a way of fixing this or downgrade to 5.0 ??
    Thanks

    you cannot downgrade, sorry.

  • Problem with Push Notifications after change from 3GS to 4S

    After I changed from my 3GS to my 4S I have a Problem with the Push Notifications.
    I only receive them on my old device, not on my new 4S.
    They both have different Phone Numbers, and i set the 4S up with a Backup from the 3GS.
    How can I fix this problem?

    I have the same phone, and have just had it replaced with an identical model and am having the same issue. I am going to go through Apple Care again and see what seems to be the problem. I never had any push issues with my 3G, except at the initial launch.

  • Problems with ALV - Excel after changing from 640 to 710

    Hi all,
    first i have to say, that i have tried to set this thread in the SAPGUI-Forum,
    but i didn't get any answers, therefore i try it here.
    I have changed our SAPGUI from 640 to 710. Now i get problems
    with ALV-GRID display.
    When i change the output to EXCEL-Inplace i get the Error-Message:
    0K000
    View cannot be switched: Product is not installed or integration is not active.
    In 640 i don't have any problems. We have ECC6.
    When i use GUI710 and SAP 4.6C i don't have any problems.
    Simple Test is possible with SE16N and change ALV output to excel-inplace.
    Can anybody help?
    Thanks.
    Regards, Dieter

    Hi Dieter,
    we had a similar problem who we resolved installing path the GUI710_1-10002995.EXE.
    Have you tried to install the patch?
    Bye
    Giovanni Mortati

  • Problem with some queries after migration from MS Access

    Hi everyone!
    We've just finished a migration from a MS Access database and we notice some errors when running some queries like :
    Query1:
    SELECT A.field1, A.field2, B.field1 as FieldTmp
    FROM A,B
    where (B.field1 <=10);
    Query2:
    SELECT Query1.field1, Query1.field2, Query1.FieldTmp
    FROM Query1 LEFT JOIN Table3
    ON (Table3.field1 = Query1.Field2) AND
    (Table3.field5 = Query1.FieldTmp)
    WHERE ((Table3.field5) Is Null)
    ORDER BY Query1.field1, Query1.FieldTmp;
    The Query1 runs as expected, but when I try to run the Query2 I got a ORA-00904 error message. If I remove the (Table3.field5 = Query1.FieldTmp) statement or modify to compare with another field (as instance, field2) everything goes fine.
    If I modify the first query to a make-table query, the Query2 request runs as desired too.
    Is there anything that we can do to keep the queries statement as it is when using the MS Access DB?
    Thanks in advance,
    Elaine Viel Denadai

    Hi Turloch! Thanks for your help!
    Those SQL Statements were extracted from the MS Access application that we will continue to use to access the data , now on an Oracle Database.
    I don't know what I can do to make this kind of statements works as it is on Access database. The first query, that I called Query1 works fine on Oracle, I just mentioned it because the 2nd Query , named Query2, use it.
    I'm not able to understand why when I change the 1st. query to a "make-table" query the Query2 works as desired, but if I keep the Query1 and Query2 as it is on the MS Access Application I got the ODBC error message and the ORA-00904 error message , related (I think!) to the FieldTmp field used on the LEFT JOIN statement (AND).
    As I told before, if I change the AND clause to compare to another field, as instance, field1 :
    FROM Query1 LEFT JOIN Table3
    ON (Table3.field1=Query1.Field2) AND
    (Table3.field5 = Query1.Field1)
    it works.
    Please, is there anything that I can do to keep the MS Access Application unchanged?
    Oracle = 8.1.6
    Oracle ODBC Driver = 8.1.6.4
    Oracle Migration Workbench = 1.3.1
    Thanks in advance,
    Elaine Viel Denadai

  • Problem with License MAC after change Time Zone in UCCX 8.02

    Hi all,
    Please I need Help.
    The last weekend, we changed the Time Zone in we Cluster of UCCX 8.02.
    Now when entry to administration page, show a warning that says.
    “The Unified CCX Systems is currently using a license that has a grace period of 30 days”
    How i can solve this problem. I must go back with the change , and return time zone previous ?
    Thanks
    Guillermo

    Welcome to the wonderful world of Cisco Licensing with 8.5 (perhaps 8.0 as well). Changes to the IP address, hostname, DNS, Time Zone, and a few other fields will change your License MAC and invalidate all licenses.
    Send an email to [email protected] asking them to rehost your license for the new license mac.
    Tanner

  • Problem with restore win8 after change hardware. (GT70 0ND-492US)

    Hi everyone!
    I have de notebook model GT70 0ND-492US  this came with one msata ssd with 128gb and i add other the same model for use super raid, that came with win8, but i make the downgrade to win7.  But now i cant make the recovery to win8 with original recovery discs, the message displayed is: "cannot recovery hardware is changed" .
    Can help?
    Thanks!!!

    Quote from: flobelix on 09-March-13, 02:25:21
    Hm, seems it won't accept the oem key then So far I couldn't find another legal source for an .iso
    OK! Can i use my serial for this copy? I Find from MS this: http://care.dlservice.microsoft.com//dl/download/5/3/C/53C31ED0-886C-4F81-9A38-F58CE4CE71E8/9200.16384.WIN8_RTM.120725-1247_X64FRE_ENTERPRISE_EVAL_EN-US-HRM_CENA_X64FREE_EN-US_DV5.ISO?lcid=1033
    thanks so much for your help!

  • Problem with updating apps after changing country in appstore account

    I have recently moved from France to New Zealand so I changed the country of my app store account. But now I can't update the apps I downloaded in the French store as I am in NZ with NZ store set. How can I fix that?

    KiwiBens wrote:
    How can I fix that?
    You'll have to switch back to the French store to update those apps.

  • HT4889 After using migration assistant I have had problems with some apps that were brought down from App store, as well as IntelliJ that just doesnt want to start at all. Does it have anything to do with the UID being changed?

    After using migration assistant I have had problems with some apps that were brought down from App store, as well as IntelliJ that just doesnt want to start at all. Does it have anything to do with the UID being changed?
    13-07-03 6:24:12.447 PM com.apple.launchd.peruser.502[1632]: ([0x0-0x5be5be].com.jetbrains.intellij[5805]) Job failed to exec(3) for weird reason: 13

    What is the exact name of the application you're trying to launch? Is it in the Applications folder?

  • Hi guy! I have been using iPhone since 2010 but now I'm facing problem with hardware still after i reclaim new iPhone some times my phone just completely blackout!! any idea??

    hi guy! I have been using iPhone since 2010 but now I'm facing problem with hardware still after i reclaim new iPhone some times my phone just completely blackout!! any idea??

    If there is a problem with your AppleID, you - and not the provider - must
    straighten out the matter.
    AppleID disabled:
    http://support.apple.com/kb/TS2446
    http://www.apple.com/support/itunes/contact/
    https://getsupport.apple.com/Issues.action

  • Problem with my laptop colour changing and some time moniter screen black out

     i have a problem with my laptop screen some time its working ok but some time its going to changing and blinking colours and screen shows black out and not respend for 10 minutes or more.i want a solution for this.

    Hi @hpsah
    Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I see that you are having a problem with your laptop screen changing and blinking through colours. I will be happy to help find a solution for this but you didn't give me information to work with. For future posts I suggest checking out Want Good Answers? Ask Good Questions. I will need to know what operating system you are using? What is the product number of the notebook? Does this issue happen if you connect an external monitor?
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • Problem with the workbook after upgrade

    Hi all,
    We are facing some problems with the workbooks after BW 3.5 Upgrade.e.g. some templates are disturbed, some variables have been affected. So I have few doubts --
    1. What could be the possible reason behind this?
    2. What exactly got changed in the system which reflected this problems?
    3. What other problems might have occurred which we may not have noticed?
    4. How can I find out the number of workbooks affected due to this?

    Dear ,
    This is known issue:
    Please implement the below mentioned note as this will solve your issue,
    Note 1609237 :  Subsequent correction to 1567679
    Regards,
    Arvind

  • Problem with Time Capsule after backup session

    I have a problem with Time Capsule after a backup session. Our two Macs (on Maverick) loose connection with the station and the only thing that seems to help is unplugging the Time Capsule  and starting it again! After the next backup session the same thing happens again. The Macs seem not to be able to hold on to the connection and continually loose it.  The iPhones and iPads that we have (4 units) are not affected - it is the Mac Mini and Mac Powerbook that experiences this problem!
    I would be grateful for your help!
    Thor

    This is standard Mac issues and has been a bug floating around since Lion.. it hits some people worse than others.. but once it starts it is awful hard to get rid of.
    Just to confirm the connection to internet is not a problem?? Just the hard disk drops out?
    I recommend you
    1. Reset the TC to factory.. and start over with all new names.. short, no spaces pure alphanumeric.
    TC name and wireless name/s should conform. By default the disk share name is data which is fine.
    2. Mavericks has changed over from using AFP to SMB for network filesharing.. why Apple why??
    This is unhelpful to say the least. Many many people are struggling with TC and being unable to mount the network drive.
    So do it manually and force it back to AFP.
    In Finder use top menu, Go, Connect to Server.
    Type AFP://TCname or TCIPaddress (it must be the network name of actual TC.. or its IP address)
    When the computer locates the resource it will ask for a password.. it is public by default.. supply your password or public and save it in the keychain.
    3. Delete the existing TM setup and start over.. See A4 here. http://pondini.org/TM/Troubleshooting.html
    I cannot promise this will fix it but should reduce the problem to now and then.. rather than every time TM needs to backup.

  • Problems with ITMS Videos after 1.1 Update

    OK, so there are lots of posts about video problems on 5G ipods after software update 1.1 and what encoding methods were used etc etc.
    After updating my 60GB iPod to 1.1 all my videos, including those purchased from the iTunes Music Store, suffer from audio problems.
    The video playback is fine, no freezing like others have mentioned, but I get loud popping and clicking sounds on the audio, particulalry at the start of a clip.
    Has ayone else experienced problems with video sound after the 1.1 update?
    Restoring to software 1.0 resolved the problem so there is definitely a problem with 1.1 and ITMS content.
    Apple need to sort this out. Fast.

    I foolishly did the 1.1 upgrade to my 60G iPod. I found that, as we all know by now, that all ov my videos that weren't from Quicktime Pro or purchased through iTunes hang after about 30 seconds, and then continues without any audio. But, the really obnoxious part is that my videos that I converted via QuickTime Pro suffered from very strange audio artifacts. These would fall into the category of clicks, purrs, warbles and other strange noises in addition to the audio that is supposed to be there. That pushed me over the line, and I "downgraded" my iPod back to release 1.0. I did the "restore" to completely erase my iPod and then re-loaded it from iTunes. I had already upgraded iTunes, and it has no problems with my now-restored-to-version 1.0 iPod. By the way, you have to edit a system file in order to do the downgrade: Put the ipod in harddisk mode. Edit the file (hidden folder and file) \iPod_Control\Device\SysInfo Replace the line that have the word "buildID" with this line:
    buildID: 0x05908000 (6.0)
    Then run the original iPod Updater to put 1.0 back onto it. This will leave you with the "feature" that any video that you change the Video Kind to TV Show will not show up on your iPod unless it's in a Video Play List. I actually like this, as it keeps the Video list from being cluttered up.
    Sony Vaio PCG-U1   Windows XP Pro  

  • I just updated my latest java but the update is causing problems with some externale devices. So i would like to uninstall this latest java update and get back the previous one. That should solve to problems with my external device

    i just updated my latest java but the update is causing problems with some external devices. So i would like to uninstall this latest java update and get back the previous one. That should solve to problems with my external device.
    Is this possible and how do i do that?
    Anyone who responds thanks for that!
    Juko
    I am running
    Hardware Overview:
      Model Name:          Mac Pro
      Model Identifier:          MacPro1,1
      Processor Name:          Dual-Core Intel Xeon
      Processor Speed:          2,66 GHz
      Number of Processors:          2
      Total Number of Cores:          4
      L2 Cache (per Processor):          4 MB
      Memory:          6 GB
      Bus Speed:          1,33 GHz
      Boot ROM Version:          MP11.005D.B00
      SMC Version (system):          1.7f10
      Serial Number (system):          CK7XXXXXXGP
      Hardware UUID:          00000000-0000-1000-8000-0017F20F82F0
    System Software Overview:
      System Version:          Mac OS X 10.7.5 (11G63)
      Kernel Version:          Darwin 11.4.2
      Boot Volume:          Macintosh HD(2)
      Boot Mode:          Normal
      Computer Name:          Mac Pro van Juko de Vries
      User Name:          Juko de Vries (jukodevries)
      Secure Virtual Memory:          Enabled
      64-bit Kernel and Extensions:          No
      Time since boot:          11 days 20:39
    Message was edited by Host

    Java 6 you can't as Apple maintains it, and Java 7 you could if you uninstall it and Oracle provides the earlier version which they likely won't his last update fixed 37 remote exploits.
    Java broken some software here and there, all you'll have to do is wait for a update from the other parties.

Maybe you are looking for