Problem with speakers/headset working together

I'm trying to set it up so all my sound comes through the speakers except for Ventrilo, which would come through the headset. The mic on the headset is working fine, and there are no problems with the speakers at all. The only problem is getting only Ventrilo to come through on the headset.

Hi,
Try the following.
Download the Conexant HD Audio installer on the link below and save it to your Downloads folder.
http://ftp.hp.com/pub/softpaq/sp45001-45500/sp45166.exe
When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers. Right click the Conexant device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
When complete, shut down the notebook, unplug the AC Adapter and then remove the battery. Hold down the Power button for 30 seconds. Re-insert the battery and plug in the AC Adapter.
Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu. Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter. Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
Let Windows fully load - it will automatically load an audio driver, but just let this complete. Then open your Downloads folder, right click on the Conexant installer and select 'Run as Administrator' to start the installation. When this has completed, right click the speaker icon in the Taskbar and select Playback Devices. Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if you now have audio.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

Audio has ceased when at Amazon and with e-mails with audio attachments. This only during last few days previously O.K. Windows Media Player still working so no problem with speakers only happens with online audio. John

Operating system Windows 7. A few days ago no problems with audio, clear sound when listening to e-mail audio attachments and Amazon music samplers. During last 2/3 days both attachments and samplers fail to work, but when playing music from library held in Windows Media Player no problems. This would appear to show no problem with speakers etc and I have not knowingly amended any audio controls.

Thank you so much for replying.
Yes I have removed and reinstalled WMP.
I had good results with the PD6 application installed on the default path onto the C: drive with the one exception that if the application was launched by accident and the user data path was not available, the PD6 application would blow away my custom user path registry settings. Now that I know what they are I have made a .reg file to repair my registry to my desired user data paths.
Installing the application on the removable drive appeared to help prevent me from launching the application by accident and overwriting my registry with default user paths.
So which is the less of the two evils?
If the application directory is not available, windows media player still tries to launch the .msi for installing PD6.
If I install the application to the C: drive but the user data to the removable drive, launching the PD6 application without the user data drive will still corrupt my registry settings for a user data path.
Both these issues seem like a logical (if not easy) fix that should be done in the PD6 application and installation package. I mean really, cannot anyone tell me why windows media player is checking the PD6 application directory? Why in PD4 did we have an option control for setting the user data path from the PD4 application? Why is this option not in the PD6 application, just the installer?
I am given a choice during installation to move the user data to another non default location. Why else would this be provided if not to accommodate my kind of request to store the user data into an alternate location other than “My Document”. Certainly Palm is not trying to force the users on how to protect and store their personal data?
Post relates to: Centro (Verizon)

Problems with logitech headset

Hey guys I was just playing Call of Duty 4 the other day, using my Logitech headset on Mountain Lion 10.8.3. But when I updated to 10.8.4 the sound from the game just completely stuffed up. The music is OK but all other sound is gone. The only other sound I can hear is what appears to be voice chat coming from the right headphone but it is very, incredibly soft and you an barly hear it. Although the sound is fine when I use the built-in speakers. Is there a problem with the headset or is it just the software in Call of Duty 4?

Hi,
As it has been so long I reread the topic.
I am now confused though.
In the first post you said
... It works fine with Skype, but when using iChat, there is no microphone pick up. I have set the audio settings to the USB headset in both the System preferences for my iMac and for the iChat preferences; ...
From that I went on to say set the iChat bits to anything else then set System Preferences > Sound > Input and then reset iChat to the Headset Mic option.
You then said it was the Output (incoming Audio) that you could not hear.
I suggested the same technique be applied to the iChat Output options/System Preferences > Sound > Output with iChat again being Set "Last".
You have replied that you have set the preferences in both places but not to the order in which you did them (this is the important bit).
I have seen one post that suggests that Output to the Headset should be done before the Mic/Input settings but did view this with a deal of scepticism.
Also even though you have no MIDI device can you Open Audio MIDI Set up in Applications/Utilities and see what sample rate the Headset is using for Input (Mic) and Output.
Ideally iChat seems to prefer 44100
You may also notice here that you have different controls over the volume.
Is it Mic/Input (your Outgoing Audio) or Incoming Audio/Output to Headset that is the issue ?
8:52 PM Tuesday; June 22, 2010
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
Message was edited by: Ralph Johns (UK)

HT3310 i have a problem with the headset of my ipod nano 4th gen. the right side don't have a sound. It comes in and out. what do I need to do?.. I am using the original headset eversince. I took it to an Apple Mac Center I was told they can't do anythin

I have a problem with the headset of my ipod nano 4th gen. the right side don't have a sound. It comes in and out. what do I need to do.. I am using the original headset eversince. I tool it to a Apple Mac Cennter and Taked with a Service Center Rep. And he told me that they can't do anything because they don't repair the ipod they didn;t even look at it. I was told instead to buy a new one. I was very disappointed.. This is already my 5th ipod though i am planning to buy a new one.. I still want it fixed so I can give it to my little sister

From the OP: "My old computer got a virus and when that happened all my music was lost. "
They don't have the music on their computer so they cannot transfer the iTunes folder, from the computer to their iPod and then to the new computer. And if they try to enable disk use on the iPod it will erase all the music that is on it. The method you cited is moving the files in a data format using the iPod as a flash drive. It doesn't work if they are in music format. That is why I suggested Yamipod.

C2-00 Problem with Bluetooth headset

I use it for a week and have a problem with bluetooth headset.
When I finish a call my mobile is stop working.
The only way to get it back is remove a battery.
I try to use other bluetooth headset but it have the same problem.
Please help me to fix this problem.
Thank you.

conceivably, yes, that is how its supposed to work
i was just wondering if there was a way to turn it off somehow, so as to only enable the bluetooth for calls and not for all audio. unpairing and pairing the bluetooth definitely works, but it just seems like overkill everytime i want to anything regarding sounds (asise from calls)
thanks,
vasilis

Blackberry 8220 Flip Black problems with Bluetooth headsets/caller cannot hear me

Problems with 3 headsets. Eralier it was working fine. but now I can hear the caller but the caller cannot hear me or anything from my side over the bluetooth headset. Otherwise without the headset the phone and the speakerphone work just fine. Any ideas????

I am experiencing the same problem, started about 10 days ago. To date, I have reset network settings, and have restored to default without success.
The weird thing with my issue I've noticed, after I go through a half dozen attempts at calling and recalling the person back, eventually, the problem goes away and the caller can hear me without issue after that. But then that may just be the 50% of the time occurrence.
So, I wonder if this is signal related, although it has occurred in 3 different locations in the US. Or if there is some restricted, or privacy policy that is related to AT&T regarding my account when calling. Kind of like being on a no fly list?
However, I can't continue with this happening, everyone says I am give Steve Jobs a bad name, so its to the genius bar or whatever they call it these days, I am heading.

Please Help: A Problem With Oracle-Provided 'Working' Example

A Problem With Oracle-Provided 'Working' Example Using htp.formcheckbox
I followed the simple steps in the Oracle-provided example:
Doc ID: Note:116534.1
Subject: How to use checkbox in webdb for bulk update using webdb report
However, when I select a checkbox and click on the Update button, I get a "ORA-01036: illegal variable name/number" error. Please advise. This was a very promising feature.
Fred
Below are step-by-step instructions provided by Oracle to create this "working" example:
How to use a checkbox in WEBDB 2.2 report for bulk update.
PURPOSE
This article shows how checkbox can used placed on WEBDB report
and how to use it.
SCOPE & APPLICATION
The following example to guide through the steps to create a working
example of this.
In this example, the checkbox is used to select the records. On clicking
the update button, the pl/sql procedure is called which will update col1 to
the string 'OK'.
After the update is done, the PL/SQL procedure calls the report again.
Since the report only select records where col1 is null, the updated
records will not be displayed when the report is called again.
Step 1 - Create Table
From Sqlplus, log in as scott/tiger and execute the following:
drop table chkbox_example;
create table chkbox_example
(id varchar2(10) not null,
comments varchar2(20),
col1 varchar2(10));
Step 2 - Insert Test Data
From Sqlplus, still logged in as scott/tiger , execute the following:
declare
l_i number;
begin
for l_i in 1..50 loop
insert into chkbox_example values (l_i, 'Comments ' || l_i , NULL);
end loop;
commit;
end;
Step 3 -Create SQL Query based WEBDB report
Logon to a WEBDB site which has access to the database the above tables are created.
Create a SQL based Report.
Name the report :RPT_CHKBOX
The select statement for the report is :
select c.id, c.comments, c.col1,
htf.formcheckbox('p_qty',c.id) Tick
from SCOTT.chkbox_example c
where c.col1 is null
In Advanced PL/SQL, (REPORT, Before displaying the form), put the following code
htp.formOpen('scott.chkbox_process');
htp.formsubmit('p_request','Update');
htp.br;
htp.br;
Step 4 - Create a stored procedure in the database
Log on to the database as scott/tiger and execute the following to create the
procedure.
Note: Replace WEBDB to the appropriate webdb user for your installation.
In my database, I had installed webdb using WEBDB username, hence user webdb owns
the packages.
create or replace procedure chkbox_process
( p_request in varchar2 default null,
p_qty in wwv_utl_api_types.vc_arr ,
p_arg_names in wwv_utl_api_types.vc_arr ,
p_arg_values in wwv_utl_api_types.vc_arr
is
i number;
begin
for i in 1..p_qty.count loop
if p_qty(i) is not null then
begin
update chkbox_example
set col1 = 'OK'
where chkbox_example.id = p_qty(i);
end;
end if;
end loop;
commit;
/* To Call Report again after updating */
SCOTT.RPT_CHKBOX.show
(p_request=>'Run Report',
p_arg_names=>webdb.wwv_standard_util.string_to_table2(' '),
p_arg_values=>webdb.wwv_standard_util.string_to_table2(' '));
end;
Summary
There are essentially 2 main modules, The WEBDB report and the pl/sql procedure (chkbox_process)
A button is created via the advanced pl/sql coding which shows on top of the report. (The
button cannot be placed at the bottom of the report due to the way WEBDB creates the procedure
internally)
When any button is clicked on the report, it calls the pl/sql procedure chkbox_process.
The procedure is called , WEBDB always passes the parameters p_request,p_arg_names and o_arg_values.
p_qty is another parameter that we are passing additionally, This comes from the checkbox created
using the htf.formcheckbox in the report select statement.
The pl/sql procedure calls the report again after processing. This is done to
show how to call the report.
Restrictions:
-The Next and Prev buttons on the report will not work.
So it is important that the report can fit in 1 page only.
(This may mean that you will not select(not ticked) 'Paginate' under
'Display Option' in the WEBDB report. If you do this,
then in Step 4, remove p_arg_names and p_arg_values as input parameters
to the chkbox_process)

If your not so sure you can use the instanceof
insurance,
Object o = evt.getSource();
if (o instanceof Button) {
Button source = (Button) o;
I haven't thoroughly read the thread, but I use something like this:if (evt.getSource() == someObjRef) {
// do that voodoo
]I haven't looked into why you'd be creating a new reference...

I am getting problem with internal table & work area declaration.

I am working with 'makt' table ..with the table makt i need to work with styles attributes ..so i declared like this
TYPES : BEGIN OF ty_makt,
         matnr TYPE makt-matnr,
         spras TYPE makt-spras,
         maktx TYPE makt-maktx,
         maktg TYPE makt-maktg,
         celltab TYPE lvc_t_styl,
       END OF ty_makt.
DATA : i_makt TYPE TABLE OF ty_makt.
DATA : wa_makt TYPE ty_makt .
    But end of program i need to update dbtable "makt"...i am getting problem with internal table & work area declaration.
i think makt table fields mapping and internal table/work area mapping is not correct. so please help me to get out from this.

Hi Nagasankar,
TYPES : BEGIN OF TY_MATNR,
              MATNR TYPE MAKT-MATNR,
              SPRAS TYPE MAKT-SPRAS,
              MAKTX TYPE MAKT-MAKTX,
              MAKTX TYPE MAKT-MAKTG,
              CELLTAB TYPE LVC_T_STYL, " Its Working perfectly fine..
             END OF TY_MAKT.
DATA: IT_MAKT TYPE STANDARD TABLE OF TY_MAKT,
          WA_MAKT TYPE TY_MAKT.
Its working perfectly fine. if still you are facing any issue post your complete code.
Thanks,
Sandeep

Has anyone ever had a problem with your iphone working outside your home but not inside. The internet works fine in and outside of the house

Has anyone had problems with your iphone working outside of the house, but not inside? Cannot make or receive calls, nor can I send or receive any text messages. This is something that just happened out of nowhere. Can I get some help please?

Did you used to have service and now suddenly you don't?
This happened to me a few years back, and several other iPhone users in my neighborhood, and after a while on the phone with AT&T they figured out that a technician had recently adjusted the receiver/sender on the tower and it was slightly off. They sent them back up and I actually had a better signal after than I did before it went out.
I would call AT&T and explain the issue you are having and see if they can fix it.
If you never had service there then like wjosten said it's probably just a bad zone.
Hope you get it sussed out.
-PM

I'm having constant problems with pages not working. I.E.: I cannot fill in writeable fields, click on buttons... or anything... nothing on the page works. And, this is not exclusive to a particular site. I can, however, work well in Explorer.

For the last few weeks I have had constant problems with pages not working. I.E.: I cannot fill in writeable fields, click on buttons... or anything... nothing on the page works. And, this is not exclusive to a particular site. It does seem to be a browser issue, because I can work well in Explorer.

Both the Yahoo! Toolbar extension and the Babylon extension have been reported to cause an issue like that. Disable or uninstall those add-ons.
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Since upgrading my Macbook pro with Yosemite, I have problem with my Xerox Work Centre 3045 - the printer works normally but it does not recognise the scanner, can you help with this?

Since upgrading my Mac book pro with Yosemite, I have problems with my Xerox Work Centre 3045 printer. The printer works normally but it does not recognise scanner, I can not scan anything. Can you help?

Open Disk Utility and select your hard drive, then Repair Permissions, it will probably return a very large number of errors, primarily printer and library errors, so run it a second time. Then restart the MacBook Pro. If it still will not scan, try using Image Capture from Finder > Applications and see if that will work. If not, contact Xerox about updated drivers.

Problem with my headset - right side: cannot hear anything

Hello
I have a macbook air and i plugged in a headseat today but I've noticed that the right side of my headset is not working. I cannot hear anything.
I made some tests and tried several different headsets and I realised it is always a problem with the right side. When I try any headset with my mac book air, I've noticed that I could not hear anything at my right ear.
Then I made another test, and I used the same headset and in other devices like my iphone for example. I've noticied that I can hear everything at both sides, so nothing is wrong with the headsets.
It seems to me that there is a problem with my computer. How do I go about solving this issue?
Is there both left and right sound boxes in my mac book air? I am asking this because I cannot see any sound boxes in my macbook air and therefore I wonder if there may be a problem with the right side of my sound box? Can this be possible?
Appreciated quick replies.
Tks,
Debora

System Preferences > Sound > Output > Internal Speakers/Headphone
Settings for the selected device:
Balance:
Make sure that the slider is set at middle.

Problems with the Headset SBH80 of Sony

With OS X Yosemite ver 10.10.3 (14D131) The Headset SBH80 of Sony distorted like speakers being played too loudly or blown out, but this distortion is present at all volumes levels with the headset. The problem is less present when someone speaks softly.
Someone has the same problem?
In the same form this Headset has problem with other devices of Apple like iPhone 6 iOS8.3 and Mini iPad2.
When I connected it with other devices different of Apple sound great without problem. Only with Apple's devices has the problem, why?
Thanks a lot.

Hi
please try two things.
1) factory reset
if that does not help
2) format the mass memory.
before doing factory reset, please do back up your of your personal data to a memory card or Ovi suite.

Problems with Speakers

Hi,
I've had my Airport Express for a couple of years all has been fine until now, I've not used it for a while and wanted to get back to streaming my music into my study.
The unit joins my network without any problem, iTunes allows me to select the Airport Speakers however when I select Play from iTunes I get this error "An error occurred while connecting to the remote speaker "RemoteRoom" An unknown error occured -3256"
I've tried from my iMac and my laptop, both have the same problem, the speakers are also working fine. I am stumped, multiple restarts later I hoped somebody has an idea what this error is and how I can get around it?

I'm having the same issue David,
everything was fine until I updated my iTunes to 8.01. giving me the same 'unknown error -3256' when I try to connect Airport Express with iTunes 8.01. This is troubling since it still works with my other computer which is running iTunes 7.0.
Guesses anyone? I'll post any finding I come up with, please anyone else do the same.
Thx

ITunes problem with speakers

This only started recently, but when I play music on iTunes, it starts off fine but every once in a while, sound will stop coming from one speaker (or sometimes both). I thought it was a problem with my speakers at first, but then I realized that pausing and resuming the song would fix the problem. So I tried playing songs with other programs and tried the audio on websites and they work fine. Not too sure what the problem is.

Some have posted issues using the Apple TV with extended networks.
Is it possible that it is some sort of interference to your network that is causing problems rather than distance. Have you tried using a different wifi channel.

Problem with speakers/headset working together

Similar Messages

Maybe you are looking for