Problem with strus-config.xml

i have created the small application in struts which is not hgetting the valures \
from struts -config.xml
my folder structure is like this
struts-example
WEB-INF
classes
sample
actionform
action class
lib
all lib files
web.xml
struts-config.xml
index.jsp
if i am trying to access the jsp file it is throwing an error
i copied all lib files to lib folder
and i set the struts.jar and servlet.jar to classparth
please help what else i need to configure for running struts

Did you add following to web.xml ?
<servlet>
        <servlet-name>action</servlet-name>
        <servlet-class>org.apache.struts.action.ActionServlet</servlet-class>
        <init-param>
            <param-name>config</param-name>
            <param-value>/WEB-INF/struts-config.xml,/WEB-INF/struts-config-2.xml</param-value>
        </init-param>
        <init-param>
            <param-name>application</param-name>
            <param-value>application</param-value>
        </init-param>
        <load-on-startup>1</load-on-startup>
    </servlet>
<servlet-mapping>
    <servlet-name>action</servlet-name>
    <url-pattern>*.do</url-pattern>
</servlet-mapping>

Similar Messages

Problem with the config.xml

Dear all,
After doing a wscompile on the config.xml file (JWSDP1.6), I am able to generate the wsdl for the interface defined.
But now the config.xml shows an error
"Cannot find the declaration of element 'configuration' "
for the attribute xmlns="http://java.sun.com/xml/ns/jax-rpc/ri/config"
Any idea what is the problem as "http://java.sun.com/xml/ns/jax-rpc/ri/config" is no longer available on the sun site.
Any alternate references to be made to this xml namespace declaration.
Rgds,
Seetesh

My point above is that Project 2007 was extremely buggy and unless files are saved using Project 2007 SP3 first you are likely to experience problems with the files when opening in project 2010. Project 2007 to 2010 with no service packs is problematic.
With SPs applied you should have far fewer problems.
Doesn't look like a exe with SP2 is available yet so you need to add the service pack separately, probably in the updates folder.
If all Project 2007 installs are already at SP3 then no need for this.
Rod Gill
Author of the one and only Project VBA Book
www.project-systems.co.nz

Problem with uix-config.xml, custom stylesheet mystyles.xss

using JDeveloper 9i (9.0.3.1035)
Hi,
I have created a uix-config.xml in the WEB-INF directory of my web-application. It looks as follows:
<?xml version="1.0" encoding="ISO-8859-1"?>
<configurations xmlns="http://xmlns.oracle.com/uix/config">
<application-configuration debug="true" >
<style-sheet-name>mystyles.xss</style-sheet-name>
</application-configuration>
</configurations>
(I did try to use the default-configuration element but there result was similarly disappointing)
in the /cabo/styles directory, I have created the mystyles.xcc file:
<?xml version="1.0"?>
<styleSheetDocument xmlns="http://xmlns.oracle.com/uix/style">
<import href="blaf.xss"/>
<styleSheet>
<style name="DefaultFontFamily">
<property name="font-family">serif</property>
</style>

<style name="DefaultFont">
<property name="font-size">15pt</property>
</style>
</styleSheet>
</styleSheetDocument>
When I start the application, I notice that debug-mode is switched on, i.e. the uix-config.xml is found and correctly loaded. However, I see no effect whatsoever of my own stylesheet mystyles.xss.
I have even tried to define the stylesheet on the UIXPagebroker servlet in the web.xml (though I have no idea whether that is possible at all):
<servlet>
<servlet-name>uix</servlet-name>
<servlet-class>oracle.cabo.servlet.UIXServlet</servlet-class>
<init-param>
<param-name>oracle.cabo.servlet.xml.CheckModified</param-name>
<param-value>true</param-value>
</init-param>
<init-param>
<param-name>oracle.cabo.ui.StylesheetName</param-name>
<param-value>mystyles.xss</param-value>
</init-param>
In short, is there anyone who can tell me how to "invoke" my own stylesheet? Am I doing something wrong?
Thanks for your thoughts!
Lucas

OK,
I have been reading more of the other posts on this topic and figured out the problem. Of course I had used the <stylesheet-name> element listed in the On Line Help UIX Developer's Guide instead of the <stylesheet> it should be.
Having made that change in the uix-config.xml file, everything was fine.
(so now no more rubbish in the web.xml, a straightforward uix-config.xml and my own mystyles.xss)
<?xml version="1.0" encoding="ISO-8859-1"?>
<configurations xmlns="http://xmlns.oracle.com/uix/config">
<default-configuration debug="true" >
<style-sheet>tmitts.xss</style-sheet-name>
</default-configuration>
</configurations>
and
<?xml version="1.0"?>
<styleSheetDocument xmlns="http://xmlns.oracle.com/uix/style">
<import href="blaf.xss"/>
<styleSheet>
<style name="DefaultFontFamily">
<property name="font-family">serif</property>
</style>

<style name="DefaultFont">
<property name="font-size">15pt</property>
</style>
</styleSheet>
</styleSheetDocument>
best regards,
Lucas Jellema (AMIS Services BV)

Problem w.r.t. JSF 2.0 with faces-config.xml

Hi All,
I am trying to evaluate the features of JSF2.0.
For that, I have created a very simple application with "JSF 2.0.2".
There is a page that displays a composite component and some other form related components (inputtext, commandbutton).
When I deploy my application without any faces-config.xml file, everything renders perfectly fine.
When I deploy the app with faces-config.xml (even an empty one without any configuration), none of the components get rendered.
Only the html elements get displayed.
I need to define some navigation-rules in my config file. I am not sure how to go further from here.
The app server I am using for deploying my app is GlassFish(v3).
Any help or pointers towards solving my problem are highly appreciated.
You can find the xhtml file, etc of my project below.
Thank you,
With best regards,
Praveen
web.xml
<?xml version="1.0" encoding="UTF-8"?>
<web-app xmlns="http://java.sun.com/xml/ns/javaee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
     xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd" version="2.5">
     <context-param>
          <param-name>javax.faces.DEFAULT_SUFFIX</param-name>
          <param-value>.xhtml</param-value>
     </context-param>
     <servlet>
          <servlet-name>Faces Servlet</servlet-name>
          <servlet-class>javax.faces.webapp.FacesServlet</servlet-class>
          <load-on-startup>1</load-on-startup>
     </servlet>
     <servlet-mapping>
          <servlet-name>Faces Servlet</servlet-name>
          <url-pattern>*.jsf</url-pattern>
     </servlet-mapping>
</web-app>
faces-config.xml
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE faces-config PUBLIC "-//Sun Microsystems, Inc.//DTD JavaServer Faces Config 1.1//EN" "http://java.sun.com/dtd/web-facesconfig_1_1.dtd">
<faces-config xmlns="http://java.sun.com/JSF/Configuration">
</faces-config>
resources->acicomp->namesection.xhtml
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml"
      xmlns:ui="http://java.sun.com/jsf/facelets"
      xmlns:f="http://java.sun.com/jsf/core"
      xmlns:h="http://java.sun.com/jsf/html"
      xmlns:composite="http://java.sun.com/jsf/composite">
<composite:interface>
</composite:interface>
<composite:implementation>
     <h:panelGroup>
     <h:panelGrid columns="2">
          <h:outputText value="Name: "/>
          <h:inputText value="myName"/>
          <h:outputText value="Company: "/>
          <h:inputText value="myComp"/>
     </h:panelGrid>
     </h:panelGroup>
</composite:implementation>
</html>
index.xhtml
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml"
      xmlns:h="http://java.sun.com/jsf/html"
      xmlns:aci="http://java.sun.com/jsf/composite/acicomp">
<h:head>
     <title>JSF Test Program</title>
</h:head>
<h:body>
     <p>My Simple Test Program</p>
        <h:form id="testForm" >
            <p>TEST</p>
            <aci:namesection></aci:namesection>
            <h:inputText id="username" value="John" />
            <h:commandButton id="submit" action="response" value="Submit"/>
        </h:form>
</h:body>
</html>

I found the problem.
The dtd location of the faces-config.xml had to be changed. It was pointing to the schema of 1.1.
With the following faces-config.xml, my application worked perfectly fine.
<?xml version="1.0"?>
<faces-config xmlns="http://java.sun.com/xml/ns/javaee"
              xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
              xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-facesconfig_2_0.xsd"
              version="2.0">
</faces-config>

Problem with reading config file

Hello,
I have problem with reading config file from the same dir as class is. Situation is:
I have servlet which working with DB, and in confing file (config.pirms) are all info about connection (drivers, users, passw, etc.). Everything work fine if I hardcoded like:
configFileName = "C:\\config.pirms";I need to avoid such hardcoding, I tryied to use:
configFileName = Pirms.class.getClassLoader().getResourceAsStream ("/prj/config.pirms").toString();but it isn't work.
My config file is in the same directory as Pirms.class (C:\apache-tomcat-5.5.17\webapps\ROOT\WEB-INF\classes\prj)
Also I tryied BundledResources, it isn't work fo me also.
Can anybody help me to solve this problem? with any examples or other stuff?
Thanks in advance.
Andrew

Thanks, but I am getting error that "non-static method getServletConfig() cannot be referenced from a static context"
Maybe is it possibility to use <init-param> into web.xml file like:
<init-param>
<param-name>configFile</param-name>
<param-value>/prj/config.pirms</param-value>
</init-param>If yes can anybody explain how to do that?
I need to have that file for:
FileReader readFile = new FileReader(configFile);Thanks in advance.

Problems with reports and XML-publisher - No XML

Hi!
I'm having a problem with Apps and XML-publisher. I made a report file, which queries some views. When executing in reports, I get all the data I expect.
Now, when I upload the reportfile to Apps and let it generate XML, my xml-file is empty (well, almost empty)
<?xml version="1.0" ?>

<T03501684>
<LIST_G_PERSOON>
<LIST_G_PERSOON />
</T03501684>
Anyone who can shed any light upon this problem?

OK, finally solved the problem... A good night's sleep always helps ;).
After just trying each queried table one after an other, I found the problem:
The difference between Oracle Apps (Dutch locale) and the reports builder (English) is the language... And our functional people have changed some names, but the Dutch ones, leaving the english names in place and one of the tables I query has language specific data, which is also appears in a where clause.

Problems with Qt Config (Xfce 4.6)

Hi
I have problems with QT Config .
I use Desktop Environments XFCE , when you save settings QT Congif (set size fonts etc ) .
Setting do not save
I have set chmod in catalog QT config .
How to fix ?
Last edited by nocentis (2009-03-16 12:00:29)

Welcome to the Apple discussion forums.
As Joeuu stated, assuming you don't have an Intel-based MacBook Pro, that means that your PowerBook is PowerPC-based. There are several steps that should get you back on track.
First, reset your power management unit (PMU). Follow directions at http://docs.info.apple.com/article.html?artnum=14449
Next, repair permissions by running Disk Utility, located in your mac hd, application/utilities folder. Highlight your hard drive and repair permissions.
Did you use the software update function or did you download the update from the Apple support site? In any event, download the combo update 10.4.6 from http://www.apple.com/support/downloads/macosx1046comboforppc.html Updates through the software update function have recently created some unique 'situations', that use of the combo update have solved.
After the update, repair disk permissions again. This is good housekeeping to do before and after any major software installation.
PB G4 1.67ghz 1.5gb; mini G4 1.5ghz 1gb Mac OS X (10.4.6)

ADF:How to use NavigationHandler in Phase-Listener with adfc-config.xml

Hi,
in our application a user should be navigated to the login-page, when he tries to navigate directly to a page where he has no right for or if the session is expired.
Our navigation is complete in the adfc-config.xml. So I created a phase-listener, which is called by the adf-settings.xml.
Inside the phase-listener I'm checking the rights. If the user doesn't have the needed rights, he should be linked to the login page. But how can I do that?
Some days ago our navigation has been complete in the faces-config.xml. But now we moved the navigation to the adfc-config.xml, because we are sure that it's better. E.g. for using the dialog framework.
In the face-config.xml we had also the call of the phase-listener. There we did the forwarding like this and it worked:
FacesContext facesContext = FacesContext.getCurrentInstance();
facesContext.getApplication().getNavigationHandler().handleNavigation(facesContext, null, "login_page");But now I think I have to use the ADFContext somehow, or?
So how can I do that with the adfc-config.xml?
Thanks a lot for your help,
Bastian
I'm using JDeveloper 11g Release 1 (11.1.1.3.0)

Hello Frank,
thanks for your answer, but it doesn't really help me, because I'm a newbie, sorry.
Does your answer mean, that I should leave the call of the phase-listener in the faces-config and then I would also have access to the login-page, which is in the adfc-config?
Or does it mean, that I call now my phase-listener by adf-settings but don't have to change the phase-listener itself and can still use my code (FacesContext...)? But that's not working. I get no error but he is also not redirecting.
Maybe my problem starts on an earlier point.
Is it better to create all pages in the adfc-config or faces-config? (Maybe you have a good reference for reading about such a basic discussion)
I thought adfc-config would be the better one. But there I'm not able to redirect to another page (login) if somebody calls a special page without rights for example.
So my second basic question would be about the relation of adfc-config, faces-config and ADFContext and FacesContext.
Because I think it's not a short answer I hope you could give me also for this a reference so that I can read these basics myself.
Thanks a lot for helping a newbie becoming better :-)
Bastian

Issue with faces-config.xml file

Hi,
I'm working on a project which needs more no. of JSF Pages and JSF Navigations,
But when i trying to creat pages more than 25 pages,the process becoming too slow,does this
effects the Application performance?Can any one suggest me why it happens and what are the
limitations for creating the JSF pages.
Does their any alternative to solve this Issue,I'm thing to create more faces-config.xml files as the
Jsf pages increases,does this solves?
Please suggest me.
Thank you,
Bandaru,

Hi Bandaru,
Are you trying to use the visual diagram option of faces-config? Coz i encountered difficulties when using it with many pages (more than 40) and the faces-config.oxd_faces was no longer able to support the diagram. "Solution" was to use only the overview and the sources of the faces-config. I don't know exactly but my problems were caused by the faces-config.oxd_faces and i don't think it affects performances for the application.
For information, that was on a Jdev 10.1.3.0.4
Regards,
Tif

Problem in faces-config.xml cycle detection

Hi,
I'm having the following problem in my jsf application. I have a loginMangager bean which holds a reference to the logged user and which is used by many other beans in my application. But in a particular situation I'm getting the following error:
SEVERE: JSF will be unable to create managed bean listaChecagemBean when it is requested. The following problems where found:
     - Managed bean mesaTarefasBean contains cyclic references. Evaluation path: mesaTarefasBean -> loginManager -> listaChecagemBean -> loginManager.My faces-config.xml looks like this:
<managed-bean>
    <managed-bean-name>loginManager</managed-bean-name>
    <managed-bean-class>
      br.gov.pgfn.efdv.mesa.view.login.LoginManagerBean
    </managed-bean-class>
    <managed-bean-scope>session</managed-bean-scope>
</managed-bean>
<managed-bean>
    <managed-bean-name>listaChecagemBean</managed-bean-name>
    <managed-bean-class>
      br.gov.pgfn.efdv.mesa.view.ListaChecagemBean
    </managed-bean-class>
    <managed-bean-scope>session</managed-bean-scope>
    <managed-property>
      <property-name>loginManager</property-name>
      <value>#{loginManager}</value>
    </managed-property>
    <managed-property>
      <property-name>mesaTarefasBean</property-name>
      <value>#{mesaTarefasBean}</value>
    </managed-property>
    <managed-property>
      <property-name>listaChecagemFacade</property-name>
      <value>#{listaChecagemFacade}</value>
    </managed-property>
</managed-bean>
<managed-bean>
    <managed-bean-name>mesaTarefasBean</managed-bean-name>
    <managed-bean-class>br.gov.pgfn.efdv.mesa.view.MesaTarefasBean</managed-bean-class>
    <managed-bean-scope>session</managed-bean-scope>
    <managed-property>
      <property-name>loginManager</property-name>
      <value>#{loginManager}</value>
    </managed-property>
    <managed-property>
      <property-name>mesaTarefasFacade</property-name>
      <value>#{mesaTarefasFacade}</value>
    </managed-property>
</managed-bean>As you can see, there is not really a cycle here since the loginManagerBean does not depend on any other bean. If you think of it as directed graph, listaChecagemBean is connected to mesaTarefasBean and both of them are connected to the loginManagerBean, which is not connected to any other bean, it's a sink node.
I'm a missing something? Is this a bug?
I'm using JSF 1.2 RI 1.2_05 and Tomcat 6.0.
Thanks in advance,
Andr� Rodrigues

Hi Ryan,
I still problems with the release 1.2_07 which works fine with 1.2_04 when I use external beans through a custom el-resolver.
<?xml version="1.0" encoding="UTF-8"?>
<faces-config xmlns="http://java.sun.com/xml/ns/javaee"
     xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
     xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-facesconfig_1_2.xsd"
     version="1.2">
     <application>
          <el-resolver>net.t_mobile.test.resolver.TestELResolver</el-resolver>
     </application>
     <managed-bean>
          <managed-bean-name>sessionBean</managed-bean-name>
          <managed-bean-class>net.t_mobile.test.beans.SessionBean</managed-bean-class>
          <managed-bean-scope>session</managed-bean-scope>
          <managed-property>
               <property-name>externalBean</property-name>
               <value>#{externalBean}</value>
          </managed-property>
     </managed-bean>
     <managed-bean>
          <managed-bean-name>dummyA</managed-bean-name>
          <managed-bean-class>net.t_mobile.test.beans.DummyBean</managed-bean-class>
          <managed-bean-scope>session</managed-bean-scope>
          <managed-property>
               <property-name>sessionBean</property-name>
               <value>#{sessionBean}</value>
          </managed-property>
     </managed-bean>
     <managed-bean>
          <managed-bean-name>dummyB</managed-bean-name>
          <managed-bean-class>net.t_mobile.test.beans.DummyBean</managed-bean-class>
          <managed-bean-scope>session</managed-bean-scope>
          <managed-property>
               <property-name>sessionBean</property-name>
               <value>#{sessionBean}</value>
          </managed-property>
          <managed-property>
               <property-name>parentBean</property-name>
               <value>#{dummyA}</value>
          </managed-property>
     </managed-bean>
</faces-config>
The dependencies are like follows:
dummyB.parentBean = dummyA
dummyB.sessionBean = sessionBean
dummyA.sessionBean = sessionBean
sessionBean.externalBean = externalBean (resolved through external el-resolver)
If I remove "dummyB" or the reference to externalBean no cycles are detected anymore.
Could you confirm this bug?
Regards,
Marc

Problem with tabs in xml text

I have a problem with my XML setup here
i use Tab key to aligh up info in the xml text for aligned
display in the program
hoever i tested on several computers and get different
resolts.
how can i fix this.
Please view the linked Image
http://img129.imageshack.us/img129/8394/flashtextproblemti4.jpg
this is what happenes even thow all run xp and all run same
latest flash version.
Anyone got an ideer how i can solve this.
BTW the font is verdana.
This is my actionscript ....
// Function to parse an address
f_parseAddress = function () {
// Set the text
_root.stageholder.textfield.htmlText =
this.firstChild.firstChild.firstChild.nodeValue;
// Create the XML object
XML_address = new XML();
// Set up the XML object
XML_address.ignoreWhite = true;
// Add the handlers
XML_address.onLoad = f_parseAddress;
// Load the XML file
XML_address.load("./Data/xml/kontakt.xml");
This is my XML file
<?xml version="1.0" encoding="iso-8859-1"?>
<text>
<address>
<![CDATA[
<font size="20">Company name</font>
Company name
address
address
Dir. tlf. + xx xx xx xx xx
+ xx xx xx xx xx
Mobil + xx xx xx xx xx
+ xx xx xx xx xx
web: <a href="
http://www.xxxxxxxxxxxxx.xx"><b>www.xxxxxxxxxxxxx.xx</b></a>
E-mail: <a
href="mailto:[email protected]"><b>[email protected]</b></a>
]]>
</address>
</text>
If anyone got a solution on how i can get my text to allign
corect
i would like to hear about it
Best reguards
Mis

alrighty then try this xml structure.
Note: formatting information like b, or linkage tags should
not be part of the xml.
The XML format is a universal format for data, if you fill it
with style information this is not good practive (in general, there
are of course scenarios where it makes sense, also since (x)html IS
also XML).
In your case you want to put the information about multiple
companies in a xml file, but you let the flash decide how to
display format this information.
so if you use the sugested XMl structure you will have full
control of the layout within flash, because you can grab every
piece of information from the xml and place it jsut where you want
in flash and format it within flash.
Of course this process is more coding work than your previous
attempt, but it pays of when you have a lot of data to process and
when you want to have full control of the final layout.
But maybe its overkill for your application (I don't know how
many companies will be stored in your xml and how complex the rest
of the app is).

Problem with '&' character in xml

Hello!
i work with XI3.0 sp19
i have a interface ftp ->XI-> idoc.
ftp adapter send a xml file.
I solve all problems with special characters using encoding="ISO-8859-9", but i have problem when in my message there are a '&' character.
any idea?????

This has been discussed lately:
Ampersand ('&') in XML - Mapping error
Regards
Stefan

Problem with images in XML with excel output

Hello:
I made an XML concurrent program, with excel output, but i am having a problem:
The rtf template has a logo (bmp image), but it is not showing in the excel (if i execute the concurrent in the oracle applications). However, if i create the xml in Oracle Reports in my computer, and then load that xml in the rdf template in word, i can see the logo in the excel preview. I don't know why is it not showing when i execute the program in applications.
If someone can help me with this, i will be very grateful.
Greetings
Message was edited by:
user632438

xml cP, will not give you a image in excel output,..
In RDF there is a placeholder for image, and the image is located in certain location, at runtime it picks and render the output with logo.
but xml CP, will get the data in xml type and merge with rtf to get the output you wanted..
if you have the rtf with logo embedded in it, if output is of pdf or rtf output , then it will display the logo ,.
in excel currently it is not possible to show the logo,..
excel you see could be xml-excel or csv-excel not the true binary excel.
to get the logo embedded ,for that you have to wait on tim for the excel template, which will be release in near future i guess..

Problem with TMS config

Hi all,
I have a problem with my TMS config.
When I adjust the transport queue, the "No system found in another group for import queue QAS" message appears.
My landscape includes a DEV-QAS and a PRD systems.
can somebody help me?
thanks in advance.

Hello,
I have the same problem. I just forund the alert from RZ20. When we are doing transport and checking RFC connections from SM59, seems to be all working fine. So I am not sure where this alert is coming from.
Command TMS_MGR_READ_TRANSPORT_QUEUE
Service Transport Service
Start Online
Function TMS_MGR_TRANSMIT_TR_QUEUE
Message TRANSMIT_QUEUE_FAILED
No system found in another group for import queue <SID>
I run into this thread but there is no information on how the problem got resolved. Please let me know if you have any ideas.
Regards,
Tony

Build shared problem with configure / config.guess

Hi,
I'm constructing some 3rd party libraries from source level with configure/automake in Suse 9.2. A common mistake in all libs is done by config.guess: it prints out "i686-pc-linux-gnuaout" which switch off the shared support at all. It's easy to workaround by print "i686-pc-linux" instead directly from configure:
ac_config_guess="echo i686-pc-linux"
Then the shared support is enabled and there left some minor problems with linker options -soname and --rpath. Then some libs can create the shared libs, for instance the apr and xml2.
Others do not, for instance log4cxx and acetao, but they do not produce any error. It looks like that simply the shared link step is not done, however the symbolic links to the release version are done. I also tryed with LD=CC and LD=cc instead of the gnu ld, but then already in config.log the shared support is not recognized. If I build by hand:
cc -shared *.o -o libACE.so
it seems to work and the result usable by applications. Since acatao includes lots of libraries to build, the manual creation is not handy / possible. So any hint to solving that are welcome. I'm using the latest sunstudio version (feb2007).
thanx rolf

It really depends on autoconf/libtool version those libs are using.
Till the most recent versions libtool had absolutely no clue that SunStudio exists on Linux. And default fallback happened to be gcc.
If you give me some specific lib (source URL or name/version) I can tell you why this lib does not configure with Sun Studio :)
Most recent version of autoconf is wize enough to handle Sun Studio on Linux. So one of the solutions for the libs might be to upgrade to a newer autoconf. Not what common user would commonly do though...
regards,
__Fedor.

Problem with strus-config.xml

Similar Messages

Maybe you are looking for