Problem with Table control & i/o field

hi experts,
i have a problem with both table control and i/o field.
2 i/o fields and 1 table control.
i/o field are common for table control data.
when i am inserting ata from here to database table, table control data are inserted successfully, but from i/o field data are not inserted.
kind regards,
debendra

Hi
You must create data objects in your ABAP code having same name as your screen i/o fields. Now these objects will contain the data entered in your screen. Use these objects to insert data in your db table.
Hope this helps
Regards,
Jayanthi.K

Similar Messages

Problem with Table control lines

Hi Friends,
This is the problem with table control lines:
I have screen with table control and I would like change the table control lines dynamicaly.
Exp:
In my PBO the Internal table which I am using to loop the TC is havig 7 records and its displayed with 7 records, now I have added one more record into my ITAB and now ITAB is having 8 records, when I am looping this ITAB with TC its taking the TC lines 7 only.
here is the code:
Initial values in gt_scr400 = 8
Initial values in tc_scr400 = 8
Now added one more recor into gt_scr400 , now gt_scr400 = 9.
LOOP AT   gt_scr400
       INTO wa_scr400
       WITH CONTROL tc_scr400
       CURSOR tc_scr400-current_line.
ENDLOOP.
I have used this logic :
DESCRIBE TABLE gt_scr400 LINES g_rec_300 .
tc_scr300-lines = g_rec_300.
but its not modifying the lines in my table control.
How to change the TC lines based on ITAB total records.
Thanks,
Sridhar

there is a field in TableViewName-xxx
don't remember the exact field name for (total no of records)
you can check it in debug. when you add records in Internal table, u need to modify this field which is set at the first time when table control is populated.

Problem with table control

Hi all,
I am able to loop two items for the sales order using table control.But I am not able to populate more than 2 items. Can anybody explain what exactly is the problem.
I am including my code below.
DATA: BEGIN OF ITAB OCCURS 0,
      KUNNR(255) TYPE C,
   END OF ITAB.
DATA :BEGIN OF ITAB1 OCCURS 0,
      KUNNR1(10) TYPE C,
      KUNNR2(10) TYPE C,
      KETDAT(8) TYPE C,
      DWERK(4) TYPE C,
      ZTERM(4) TYPE C,
      INCO1(3) TYPE C,
      INCO2(16) TYPE C,
      AUDAT(8) TYPE C,
      VKBUR(4) TYPE C,
      BZIRK(3) TYPE C,
      END OF ITAB1.
DATA : BEGIN OF ITAB2 OCCURS 0,
       KUNNR1(10) TYPE C,
       MABNR(8) TYPE C,
       KWMENG(1) TYPE C,
      END OF ITAB2.
include bdcrecx1.
PARAMETERS PATH(128) DEFAULT 'C:\SALES1.TXT'.
DATA : FNAM(20) TYPE C,
       IDX      TYPE C.
start-of-selection.
CALL FUNCTION 'WS_UPLOAD'
   EXPORTING
     FILENAME                      = PATH
     FILETYPE                      = 'ASC'
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT ITAB.
   itab1-kunnr1 = itab2-kunnr1.
    ITAB1-KUNNR1 = ITAB-KUNNR+0(10).
    ITAB1-KUNNR2 = ITAB-KUNNR+10(10).
    ITAB1-KETDAT = ITAB-KUNNR+20(8).
    ITAB1-DWERK = ITAB-KUNNR+28(4).
    ITAB1-ZTERM = ITAB-KUNNR+32(4).
    ITAB1-INCO1 = ITAB-KUNNR+36(3).
    ITAB1-INCO2 = ITAB-KUNNR+39(16).
    ITAB1-AUDAT = ITAB-KUNNR+55(8).
    ITAB1-VKBUR = ITAB-KUNNR+63(4).
    ITAB1-BZIRK = ITAB-KUNNR+67(3).
   ITAB2-KUNNR1 = ITAB-KUNNR+0(10).
    ITAB2-MABNR = ITAB-KUNNR+70(8).
    ITAB2-KWMENG = ITAB-KUNNR+78(1).
    APPEND ITAB1.
    CLEAR ITAB1.
    APPEND ITAB2.
    CLEAR ITAB2.
ENDLOOP.
perform open_group.
loop at itab1.
    perform bdc_dynpro      using 'SAPMV45A' '0101'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBAK-AUART'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'VBAK-AUART'
                                  'ZOR'.
    perform bdc_field       using 'VBAK-VKORG'
                                  '1000'.
    perform bdc_field       using 'VBAK-VTWEG'
                                  '10'.
    perform bdc_field       using 'VBAK-SPART'
                                  '10'.
    perform bdc_dynpro      using 'SAPMV45A' '4001'.
    perform bdc_field       using 'BDC_OKCODE'
                                  'KKAU'.
    perform bdc_field       using 'KUAGV-KUNNR'
                                   itab1-kunnr1.
    perform bdc_field       using 'KUWEV-KUNNR'
                                  itab1-kunnr2.
    perform bdc_field       using 'RV45A-KETDAT'
                                  itab1-ketdat.
    perform bdc_field       using 'RV45A-KPRGBZ'
                                  'D'.
    perform bdc_field       using 'VBKD-PRSDT'
                                  '11/21/2005'.
    perform bdc_field       using 'VBKD-ZTERM'
                                  itab1-zterm.
    perform bdc_field       using 'VBKD-INCO1'
                                  ITAB1-INCO1.
    perform bdc_field       using 'VBKD-INCO2'
                                  ITAB1-INCO2.
    perform bdc_dynpro      using 'SAPMV45A' '4002'.
    perform bdc_field       using 'BDC_OKCODE'
                                     '=T\05'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBKD-BZIRK'.
    perform bdc_field       using 'VBAK-AUDAT'
                                  ITAB1-AUDAT.
    perform bdc_field       using 'VBAK-VKBUR'
                                  ITAB1-VKBUR.
    perform bdc_field       using 'VBAK-WAERK'
                                  'USD'.
    perform bdc_field       using 'VBKD-PRSDT'
                                  '11/21/2005'.
    perform bdc_field       using 'VBKD-BZIRK'
                                  ITAB1-BZIRK.
    perform bdc_dynpro     using 'SAPLV60F' '4001'.
    perform bdc_field       using 'BDC_OKCODE'
                                 '=T\06'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'FPLT-AFDAT(05)'.
    perform bdc_field       using 'FPLA-BEDAT'
                                  '11/21/2005'.
    perform bdc_field       using 'FPLA-BEDAR'
                                  '01'.
    perform bdc_field       using 'FPLA-RFPLN'
                                  '0000000042'.
    perform bdc_field       using 'FPLT-AFDAT(01)'
                                  '11/21/2005'.
    perform bdc_field       using 'FPLT-AFDAT(02)'
                                  '11/21/2005'.
    perform bdc_field       using 'FPLT-AFDAT(03)'
                                  '11/21/2005'.
    perform bdc_field       using 'FPLT-AFDAT(04)'
                                  '11/21/2005'.
    perform bdc_field       using 'FPLT-AFDAT(05)'
                                  '11/21/2005'.
    perform bdc_dynpro      using 'SAPMV45A' '4002'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=T\09'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBKD-ZLSCH'.
    perform bdc_field       using 'VBKD-KTGRD'
                                  '01'.
    perform bdc_field       using 'VBKD-ZLSCH'
                                  'C'.
    perform bdc_field       using 'VBAK-ZUONR'
                                 'Open Sales order'.
    perform bdc_dynpro      using 'SAPMV45A' '4002'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=T\11'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'GVS_TC_DATA-REC-PARTNER(05)'.
    perform bdc_field       using 'GV_FILTER'
                                  'PARALL'.
    perform bdc_field       using 'GVS_TC_DATA-REC-PARTNER(05)'
                                  '3838'.
    perform bdc_dynpro      using 'SAPMV45A' '4002'.
    perform bdc_field       using 'BDC_OKCODE'
                                   '=T\14'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBKD-BSARK'.
    perform bdc_field       using 'VBKD-BSARK'
                                  'CU01'.
    perform bdc_field       using 'VBKD-IHREZ'
                                   '12134'.
    perform bdc_dynpro      using 'SAPMV45A' '4002'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/EBACK'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBAK-ZZLEAT'.
    perform bdc_field       using 'VBAK-ZZWARR'
                                  '12346C'.
    perform bdc_field       using 'VBAK-ZZFABW'
                                  'F14689'.
    perform bdc_field       using 'VBAK-ZZWARX'
                                  '12012005'.
    perform bdc_field       using 'VBAK-ZZLEAT'
                                  'CGUYFIU'.
    perform bdc_dynpro      using 'SAPMV45A' '4001'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=PKO1'.
    perform bdc_field       using 'KUAGV-KUNNR'
                                  itab1-kunnr1.
    perform bdc_field       using 'KUWEV-KUNNR'
                                  itab1-kunnr2.
    perform bdc_field       using 'RV45A-KETDAT'
                                  itab1-ketdat.
    perform bdc_field       using 'RV45A-KPRGBZ'
                                  'D'.
    perform bdc_field       using 'VBKD-PRSDT'
                                  '11/21/2005'.
    perform bdc_field       using 'VBKD-ZTERM'
                                  itab1-zterm.
    perform bdc_field       using 'VBKD-INCO1'
                                  ITAB1-INCO1.
    perform bdc_field       using 'VBKD-INCO2'
                                  ITAB1-INCO2.
perform bdc_field       using 'BDC_CURSOR'
                                  'RV45A-ccode(idx)'.
MOVE 1 TO IDX.
    LOOP AT ITAB2 WHERE KUNNR1 = ITAB2-KUNNR1.
      CONCATENATE 'RV45A-MABNR(' IDX ')' INTO FNAM.
      perform bdc_field       using FNAM
                              ITAB2-MABNR.
      CONCATENATE 'RV45A-KWMENG(' IDX ')' INTO FNAM.
      perform bdc_field       using FNAM
                              ITAB2-KWMENG.
      IDX = IDX + 1.
ENDLOOP.
    perform bdc_dynpro      using 'SAPMV45A' '4001'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=PKO1'.
    perform bdc_field       using 'KUAGV-KUNNR'
                                  itab1-kunnr1.
    perform bdc_field       using 'KUWEV-KUNNR'
                                  itab1-kunnr2.
    perform bdc_field       using 'RV45A-KETDAT'
                                  itab1-ketdat.
    perform bdc_field       using 'RV45A-KPRGBZ'
                                  'D'.
    perform bdc_field       using 'VBKD-PRSDT'
                                  '11/21/2005'.
    perform bdc_field       using 'VBKD-ZTERM'
                                  itab1-zterm.
    perform bdc_field       using 'VBKD-INCO1'
                                  ITAB1-INCO1.
    perform bdc_field       using 'VBKD-INCO2'
                                  ITAB1-INCO2.
    perform bdc_field       using 'RV45A-VBAP_SELKZ(01)'
                                  'X'.
    perform bdc_dynpro      using 'SAPMV45A' '5003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/EBACK'.
    perform bdc_dynpro      using 'SAPMV45A' '4001'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=SICH'.
    perform bdc_field       using 'KUAGV-KUNNR'
                                  itab1-kunnr1.
    perform bdc_field       using 'KUWEV-KUNNR'
                                  itab1-kunnr2.
    perform bdc_field       using 'RV45A-KETDAT'
                                  ITAB1-KETDAT.
    perform bdc_field       using 'RV45A-KPRGBZ'
                                  'D'.
    perform bdc_field       using 'VBKD-PRSDT'
                                  '11/21/2005'.
    perform bdc_field       using 'VBKD-ZTERM'
                                  ITAB1-ZTERM.
    perform bdc_field       using 'VBKD-INCO1'
                                   ITAB1-INCO1.
    perform bdc_field       using 'VBKD-INCO2'
                                  ITAB1-INCO2.
    perform bdc_field       using 'BDC_CURSOR'
                                    'RV45A-MABNR(idx)'.
    perform bdc_transaction using 'VA01'.
endloop.
Perform close_group.

Answered the other post.
<i>
I think i see the problem,
LOOP AT ITAB2 WHERE KUNNR1 = <b>ITAB2</b>-KUNNR1.
CONCATENATE 'RV45A-MABNR(' IDX ')' INTO FNAM.
perform bdc_field using FNAM
ITAB2-MABNR.
CONCATENATE 'RV45A-KWMENG(' IDX ')' INTO FNAM.
perform bdc_field using FNAM
ITAB2-KWMENG.
IDX = IDX + 1.
ENDLOOP.
I think that it should be .....
LOOP AT ITAB2 WHERE KUNNR1 = <b>ITAB1</b>-KUNNR1.
</i>
Regards,
Rich Heilman

STRANGE PROBLEM WITH TABLE CONTROL

Hi all,
I am having a strange problem.
I have a table control in which i have a sort button .WHEN I PLACE THE CURSOR AND CLICK SORT BUTTON,IT WOULD SORT THE RECORDS IN ASCENDING BASED ON THAT COLUMN.
THE PROBLEM IS THAT WHEN I SCROLL DOWN THE WINDOW USING MY MOUSE ,IAM LOSING THE SORT AND THE RECORDS COME TO ORGINAL WAY THAT ARE BEING READ FROM DATABASE.i WANTED TO MAINTAIN THE RECORDS IN THE SORTED WAY EVEN THOUGH I SCROLL DOWN THROUGH MY MOUSE .
PLEASE TELL ME IF I MISS ANY TRICK

Hello,
You may get your data again in the PBO section. So, get all your data before the PBO .
regards,
Naimesh

Problem with table controle

hai experts
how should i implement a table control in LSMW please send me u r seggassions and code also
Message was edited by:
venkat rathnam

hai experts my question has not been answered yet please send me answer

Problem with Table control in BDC

Hi Experts,
I have dought regarding Table control i.e How to handle Table control in BDC? i need explanation for handling TC and senario for using T C in BDC?
regards,
Sudha.

Hello,
This is the bdc to update the XK01 transaction code (Vendor Creation).
Here we will use table controls for bankings. Here Iam sending the coding and text files.
Coding
REPORT zprataptable2
       NO STANDARD PAGE HEADING LINE-SIZE 255.
DATA : BEGIN OF itab OCCURS 0,
        i1 TYPE i,
        lifnr LIKE   rf02k-lifnr,
        bukrs LIKE   rf02k-bukrs,
        ekorg LIKE   rf02k-ekorg,
        ktokk LIKE   rf02k-ktokk,
        anred LIKE lfa1-anred,
        name1 LIKE lfa1-name1,
        sortl LIKE lfa1-sortl,
        land1 LIKE lfa1-land1,
        akont LIKE lfb1-akont,
        fdgrv LIKE lfb1-fdgrv,
         waers LIKE lfm1-waers,
        END OF itab.
DATA : BEGIN OF jtab OCCURS 0,
        j1 TYPE i,
        banks LIKE lfbk-banks,
        bankl LIKE lfbk-bankl,
        bankn LIKE lfbk-bankn,
         END OF jtab.
DATA : cnt(4) TYPE n.
DATA : fdt(20) TYPE c.
DATA : c TYPE i.
INCLUDE bdcrecx1.
START-OF-SELECTION.
CALL FUNCTION 'WS_UPLOAD'
    EXPORTING
      filename = 'C:\first1.txt'
      filetype = 'DAT'
    TABLES
      data_tab = itab.
CALL FUNCTION 'WS_UPLOAD'
   EXPORTING
     filename                      = 'C:\second.txt'
     filetype                      = 'DAT'
    TABLES
      data_tab                      = jtab.
LOOP AT itab.
    PERFORM bdc_dynpro      USING 'SAPMF02K' '0100'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'RF02K-KTOKK'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM bdc_field       USING 'RF02K-LIFNR'
                                  itab-lifnr.
    PERFORM bdc_field       USING 'RF02K-BUKRS'
                                  itab-bukrs.
    PERFORM bdc_field       USING 'RF02K-EKORG'
                                   itab-ekorg.
    PERFORM bdc_field       USING 'RF02K-KTOKK'
                                   itab-ktokk.
    PERFORM bdc_dynpro      USING 'SAPMF02K' '0110'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'LFA1-LAND1'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM bdc_field       USING 'LFA1-ANRED'
                                  itab-anred.
    PERFORM bdc_field       USING 'LFA1-NAME1'
                                  itab-name1.
    PERFORM bdc_field       USING 'LFA1-SORTL'
                                  itab-sortl.
    PERFORM bdc_field       USING 'LFA1-LAND1'
                                  itab-land1.
    PERFORM bdc_dynpro      USING 'SAPMF02K' '0120'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'LFA1-KUNNR'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM bdc_dynpro      USING 'SAPMF02K' '0130'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'LFBK-BANKN(01)'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '=ENTR'.
    cnt = 0.
    LOOP AT jtab WHERE j1 = itab-i1.
      cnt = cnt + 1.
      CONCATENATE 'LFBK-BANKS(' cnt ')' INTO fdt.
      PERFORM bdc_field USING fdt jtab-banks.
      CONCATENATE 'LFBK-BANKL(' cnt ')' INTO fdt.
      PERFORM bdc_field USING fdt jtab-bankl.
      CONCATENATE 'LFBK-BANKN(' cnt ')' INTO fdt.
      PERFORM bdc_field   USING fdt jtab-bankn.
      IF cnt = 5.
        cnt = 0.
        PERFORM bdc_dynpro      USING 'SAPMF02K' '0130'.
        PERFORM bdc_field       USING 'BDC_CURSOR'
                                      'LFBK-BANKS(01)'.
        PERFORM bdc_field       USING 'BDC_OKCODE'
                                      '=P+'.
        PERFORM bdc_dynpro      USING 'SAPMF02K' '0130'.
        PERFORM bdc_field       USING 'BDC_CURSOR'
                                      'LFBK-BANKN(02)'.
        PERFORM bdc_field       USING 'BDC_OKCODE'
                                      '=ENTR'.
      ENDIF.
    ENDLOOP.
    PERFORM bdc_dynpro      USING 'SAPMF02K' '0130'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'LFBK-BANKS(01)'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '=ENTR'.
    PERFORM bdc_dynpro      USING 'SAPMF02K' '0210'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'LFB1-FDGRV'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM bdc_field       USING 'LFB1-AKONT'
                                  itab-akont.
    PERFORM bdc_field       USING 'LFB1-FDGRV'
                                  itab-fdgrv.
    PERFORM bdc_dynpro      USING 'SAPMF02K' '0215'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'LFB1-ZTERM'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM bdc_dynpro      USING 'SAPMF02K' '0220'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'LFB5-MAHNA'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM bdc_dynpro      USING 'SAPMF02K' '0310'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'LFM1-WAERS'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM bdc_field       USING 'LFM1-WAERS'
                                  itab-waers.
    PERFORM bdc_dynpro      USING 'SAPMF02K' '0320'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'RF02K-LIFNR'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '=ENTR'.
    PERFORM bdc_dynpro      USING 'SAPLSPO1' '0300'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '=YES'.
    PERFORM bdc_transaction USING 'XK01'.
ENDLOOP.
PERFORM close_group.
Intial screen data file.
1     63190      0001     0001     0001     mr     bal188     b     in     31000     a1     inr
2     63191      0001     0001     0001     mr     bal189     b     in     31000     a1     inr
Table control Data:
1     in     sb     11000
1     in     sb     12000
1     in     sb     13000
1     in     sb     14000
1     in     sb     15000
1     in     sb     16000
1     in     sb     17000
1     in     sb     18000
1     in     sb     19000
1     in     sb     20000
1     in     sb     21000
1     in     sb     22000
2     in     sb     21000
2     in     sb     22000
Thanks,
Vasanth

Problem with table control adding new line

Dear friends,
i am working with the VA01 upload program.
when i am uploading the multiple line items i am getting the error.
i resoved the error and successfully upload the data for 3 line items.
when i am upload the data for 10line items it was showing the error as the screen field doesn't exists.
here i am attaching the logic
DATA: V_MABNR(20) TYPE C,
      V_KWMENG(20) TYPE C,
      V_KBETR(20) TYPE C,
      VAL(03) TYPE N VALUE 01.
include bdcrecx1.
start-of-selection.
perform open_group.
LOOP AT IT_FINAL INTO WA_FINAL.
perform bdc_dynpro      using 'SAPMV45A' '0101'.
perform bdc_field       using 'BDC_CURSOR'                              'VBAK-AUART'.
perform bdc_field       using 'BDC_OKCODE'                              '/00'.
perform bdc_field       using 'VBAK-AUART'                              WA_FINAL-AUART."'OR'.
perform bdc_field       using 'VBAK-VKORG'                              WA_FINAL-VKORG."'1000'.
perform bdc_field       using 'VBAK-VTWEG'                              WA_FINAL-VTWEG."'12'.
perform bdc_field       using 'VBAK-SPART'                              WA_FINAL-SPART."'00'.
perform bdc_dynpro      using 'SAPMV45A' '4001'.
perform bdc_field       using 'BDC_OKCODE'                              '/00'.
perform bdc_field       using 'BDC_CURSOR'                              'VBKD-BSTDK'.
perform bdc_field       using 'VBKD-BSTKD'                              WA_FINAL-BSTKD."'PO TEST'.
perform bdc_field       using 'VBKD-BSTDK'                              WA_FINAL-BSTDK."'03.02.2012'.
perform bdc_field       using 'KUAGV-KUNNR'                             WA_FINAL-KUNAG." '1033'.
perform bdc_field       using 'KUWEV-KUNNR'                             WA_FINAL-KUNWE." '1033'.
LOOP AT IT_FINAL1 INTO WA_FINAL1.
CONCATENATE 'RV45A-MABNR(' '0' VAL ')' INTO V_MABNR.
CONCATENATE 'RV45A-KWMENG(' '0' VAL ')' INTO V_KWMENG.
CONCATENATE 'KOMV-KBETR(' '0' VAL ')' INTO V_KBETR.
perform bdc_field using 'BDC_CURSOR'                                    V_KBETR."v_kwmeng.
perform bdc_field using v_mabnr                                         WA_FINAL1-MATNR."wa_item-matnr.
perform bdc_field using v_kwmeng                                        WA_FINAL1-KWMENG."wa_item-kwmeng.
perform bdc_field using v_kbetr                                         WA_FINAL1-KBETR."wa_item-kwmeng.
perform bdc_dynpro using 'SAPMV45A' '4001'.
perform bdc_field using 'BDC_OKCODE'                                    '/00'.
VAL = VAL + 1.
endloop.
*VAL = 01.
perform bdc_dynpro using 'SAPMV45A' '4001'.
perform bdc_field using 'BDC_OKCODE'                                    '=SICH'.
ENDLOOP.
perform bdc_transaction using 'VA01'.
perform close_group.
i searched in SDN i found a lot of links but i can't find the proper document.
can any one explain me clearly about adding the N line items and screen resolution logic.
Thanks,
karunakar

Hi,
For screen resolution logic, you can pass the value 'X' into the variable CTU_PARAMS-DEFSIZE in the OPTIONS parameter of CALL TRANSACTION using BDC DATA.
      CALL TRANSACTION TCODE USING BDCDATA
                                                     MODE   CTUMODE
                                                     UPDATE CUPDATE
                                                     OPTIONS FROM OPT
                                                     MESSAGES INTO MESSTAB.
DEFSIZE - Selects whether the screens of the called transaction are displayed in the standard screen size. Values: "X" (standard size), " " (current size).

ABAP HR How to create infotype with table control in it like Infotype 0008

Hi Experts.
I need help from u guys. My client requirement is to create custom infotype just like 0008 infotype which contain table control to save amount and wage types. I try to create infotype with table control using PM01, but that table control is in display mode only, i almost search every where to create custom infotype with table control but what ever threads in forum all are they unanswered and most of the threads for creating infotype. But i already done with infotype , but my main problem is table control.
If any one have some suggestion for this please share with me.
<removed by moderator> i am looking for positive reply.
Edited by: Thomas Zloch on Aug 30, 2011 12:54 PM

Hi
I've created several infotypes with a Table Control and it is always the same story. You have to create a custom Z table to store the Table Control data (if you can have unlimited records), so in the PSXXXX structure you need to add a TABNR field to link the PAXXXX table and the Z one, just like the type table OM infotypes.
Then in your code you have to control every possible operation, INS, MOD, DEL... and update the Z table accordingly (the standard code won't do that)
If your TC fields appear in display mode, take a look at the Groups 1 and 3 in your fields, the must be set with the usual values for a PA infotype.
If you have more questions, just ask,
Regards

What could be the problem with table REGUH

Hi exprts
i developed a report . its wrking ok in developemt system
but in Quality system ,
the below query is taking more time.
in quality even i have taken slection criteria which is very less than devlopment selection.
please tell me the below query is performance wise not good or
is there any problem with table REGUH in quality system?
IF NOT ( t_bsak_aux[] IS INITIAL ).
    SELECT laufd laufi xvorl zbukr lifnr rwbtr kunnr empfg"
           vblnr ausfd rzawe
      FROM reguh
      INTO TABLE t_reguh
      FOR ALL ENTRIES IN t_bsak_aux
      WHERE laufd <> space
        AND laufi <> space
        AND zbukr = t_bsak_aux-bukrs
        AND lifnr = t_bsak_aux-lifnr
        AND vblnr = t_bsak_aux-augbl.
thanks in advance
regards
neeru

Hi,
Using SPACE against the keys (LAUFI, LAUFD - specifically LAUFD) will most likely return no results. LAUFD, being one of the keys and the date which the program is supposed to run (considering that this is settlement data - it has already run) - implies that this field will be populated. Putting " = SPACE" in your where clause is saying that you want to find records from the table where those fields are not populated. That is fine for LAUFI, considering it is the indicator for a proposal only. In my requirement, my client did not want to see proposals but only real payment runs - therefore, LAUFI = SPACE is correct.
The reason you are having poor performance while selecting form this table is because it is a cluster table like bseg. This thread explains a little bit of why cluster tables are a performance nightmare when trying to select - although it is about bseg, you will get the idea:
http://blogs.ittoolbox.com/sap/db2/archives/select-from-bsegrfblg-performance-problem-14247
I'm trying to find an alternative to get bank account information regarding payments - I will post a reply if I am lucky to find one!
Good luck

Problem with table paging [PDK for NET]

Hi All,
I have a problem with table paging in PDK for .NET (ver 2).
The Table has 14 visible rows.
The lead selection is set to "SINGLE"
When the user selects a row I can use
Table1.SelectedKeys(0) Mod Table1.VisibleRowCount
in order to get the info of the selected row.
If I will page using the "Prev/Next" page of the Table UI element it will also work.
However, when I press "Prev/Next" item and then select a row it chooses the wrong row.
(See picture: http://img509.imageshack.us/img509/3882/table5tq.jpg)
What can I do in order to solve the problem?
Thanks,
Omri

Hi Omri,
how are you doing ?
The SAPTable is similar to a DataGrid control and need to be bound to the datasource on every postback
a good idea is to keep the dataset available in the page or on the server ( so that you dont need to keep making expensive fetch operations
The selected row is affected by the recordset (dataset) and needs additional programming
A work around for the selected row issue is to save it in a server side hidden variable (or anything that will persist) and read and set the value in the page / next button handler
with respect,
amit

URGENT ! JDEV 10.1.2 Problem with data control generated from session bean

I got a problem with data control generated from session bean which return a collection of data transfer object.
The dto's seem to be correct. The session bean load correctly the data into and the object's are plenty of data. Using the console to display the dto content is ok.
When generating a data control from this session bean and associate the dto included in the collection only the first object level and one-to-one dto object are correctly setted in the data control. Object that represent collection into the dto (one-to-many foreign key) are setted as collection with an iterator but the structure of the object is not setted. I don't know how to associate this second level of collection with the dto bean class to obtain the attributes definition.
I created a case with hr schema like the hrApp demo application in the tutorial with departments and employees table. I got the same problem.
Is it a bug ?
It exists a workaround to force the data control to understand the collection data structure ?
Help is welcome ! this is urgent !!!

we found the problem by assigning the child dto bean class to the node representing the iterator in the xml file corresponding to the master dto.

Problem with table formatting

I'm having a lot of problems with tables not reflecting their formatting when I open them in a browser. I've tried opening in Safari, Firefox & Camino with the same results. For example, a row with the following html content has a much larger height & aligns the text to the top when opened in a browser:
<tr>
          <td height="15" colspan="3" valign="middle"><h6 align="center">Summer 2009</h6>
          </td>
        </tr>
If it matters, this is a row in a table nested in another table. Here's the code down to the row in question (all tags are closed properly in the remaining code):
<table width="600" border="2" align="center" cellpadding="0" cellspacing="0">
    <tr>
      <td align="center" valign="top"><img src="images/events.jpg" width="250" height="35"></td>
    </tr>
    <tr>
      <td align="left" valign="top">
      <table width="100%" border="0" align="center" cellpadding="1" cellspacing="0">
        <tr>
          <td height="15" colspan="3" valign="middle"><h6 align="center">Summer 2009</h6>
          </td>
        </tr>
I am using a style sheet for text. Here's the code for "h6" if that matters:
h6 {
font-family: Verdana, Geneva, Arial;
font-size: 14px;
font-weight: bold;
color: #660099;
Any ideas is appreciated. This is driving me nuts. Spacing and alignment sometimes work and sometimes don't work. Dreamweaver is supposed to make such things easier!
Kevin

Header tags are usually used round a bit of text, not parts of a table, and if you don't specify the margins on them, can force different amounts of space below in different browsers. Try making the bottom margin on h6 zero, and confine it to text within a cell.
Also, if you can upload your page somewhere and let us have the url it will be easier to troubleshoot.

Strange issue with table control in dialog programming! Please help!

Hello everyone:
I have a table control on screen painter and I have atleast 10 rows on display when user calls the screen. If I have 15 columns then ofcourse user has to scroll down to see extra rows. I have line selection set to "single" for table control so that user can select only one row at a time. This works fine when user does not have to scroll to see extra rows. It is tough for me to explain i.e., if the table control displays 10 rows when the screen opens up then they can only select single row at a time (rows 1 -10). For example user selected row 7 and now they scroll down to see extra rows (for example 13) then it lets them select row 13 also even though I set line selection to "single" in the properties for table control! They should be able to select only one row at a time. Is this some limitation with table control in SAP? Please give me any information you have.
Thanks.
Mithun

Hi,
As you suspected, this is a limitation in the table control. You need to take care of the single-selection functionality yourself except for the rows that are actually being displayed. See [Note 588284|https://service.sap.com/sap/support/notes/588284] for the official SAP explanation.
Regards,
Jamie

Problem with tables -- need help!

I am having problems with table formatting, when using
Preformatted text. The tables look fine in the WYSIWYG editor, but
have lots of extra space above and below the text when looking at
the output files.
I will attach the code from one of the HTML files from my
project, so you can see what I'm talking about.
Thanks.

Well, if you're talking about the single-celled table with
the line:
<p class=Preformatted>[assembly:
Ace.AceAssembly]</p>
</pre>
... you can eliminate the <P> tags. that will give you
one line less. Otherwise, your remaining space is the result of the
<PRE> tag. It, like the <XMP> tag, gives it one line of
space beneath as well.
Your alternative beyond that would be to, when needed, wrap
up the script in Javascript. That line, for instance, wouldn't need
it.

How can I work lsmw with table control using mm01 appl?

Hi
How can I work lsmw with table control using mm01 appl?
Is it difefrent the way we handle table control in BDC?
Thank You

Hi
How can I work lsmw with table control using mm01 appl?
Is it difefrent the way we handle table control in BDC?
Thank You

Problem with Table control & i/o field

Similar Messages

Maybe you are looking for