Problem with table maintenance

hello there,
when iam tring to edit this custom table it says transport has been locked and not allowing me to change ..anybody know how to solve this issue ..
thanks

Hi,
In SE10 (or similar) you can lock or unlock a transport.
On the menu choose Request/Task -> Request -> Protect or Remove Protection, if the message is coming up with a transport that is not in you user id, check with the transport's owner.
Regards,
Nick

Similar Messages

Problem with table maintenance allowed

hi,
here my problem is table is genarated and stored under local object that time i m creating function group is zabc. afterwards i m storing my table in my development class that time it is not possible to change function group in table maintenance genarator plz help me any one knows.
what is the exact use of table maintenance generator i m using this for ztables and i m going to screen painter i m adjesting the fields.what is the exact use of it.

Hi,
1) You may delete the function group assignment and re-assign another one in change mode
2) The use of table maintenance generator is to provide users with a screen to maintain data in the table. If the data is not going to be populated by any users then there is no need for it. Transactions will automatically populate the data in the background
3) One can access the maintenance screen by going to SM30 or can assign your own transaction code to access it
Hope it helps.
Raj
Reward points if helpful

Problem with table maintenance event

Hi Experts,
In the table maintenance event 05 for a ztable, I have written logic to validate if few key fields and non key fields are not initial.
If they are initial,need to throw an error message and it has to stay in the same screen.But right now it grays out the non key field.
Tried the combination of events 01 and 05 it grays out the key field.
Please let me know if there are any ways to achieve this without making modifications in the PBO or PAI of the ztable.
Regards,
Sridevi

I have this exact problem, why is this thread 'closed'? Is there an answer provided somewhere?
I have found a topic which shows an information message, which claims that the data is not saved.
But it does save the data if you use an information message and blocks non-key fields when using an error message
so this problem is still open for me.
Does anybody have a solution?
Ah an answer was indeed provided in another topic:
Issuing an Error in Table Maintenance Event
Edited by: Arno ter Horst on May 5, 2011 4:12 PM

Problem with table maintenance generator overview screen

I added a field in a custom table and then used table maintenance generator to regenerate the table maintenance screen.
I used 2 step to generate. The problem that I have is the field not displayed in the overview screen though it is visible in the single screen ( ie the second screen).
I am not sure where the problem is as the field is not visible at all in the table control of overview screen.
Please help me on this as to what could be the problem.

Usually it is enough to regenerate both screens and the modules, but sometimes it doesn't pick up all the changes. In that case just delete the maintenance dialog and recreate it. That should do it.
Regards,
Michael

Problem with table maintenance generator

Hye,
When i do create entries in table contents, the column name is shown as (+)....
where the problem is ?? how to get resolved....tried recreating the TMG but not use.
Thanx & Regards,
Manisha Suvarna.

Hi Manisha Suvarna.
You can edit this information editing Maintenance view following steps below:
- Transaction Se55
- Environment -> Modification -> Modification Screens
There you can edit this information and Add the right value.
Kind regards

Problem with table maintenance and screen

Hi,
I modified the screen for a maintenance view table and added new fields. I went to SE11 to add the new fields in the table and then to SE51 to change the layout. My problem is when I edit the new field that I added, a message(Data was saved) at the bottom of the screen will appear but the value that I put in the field is gone. When i checked the contents of the table, the values were not also updated. Please let me know if there are other things that I forgot to activate or change.
Thanks in advance,
Eric

Hi
Its the other way.
First you modify the table to add new fields. Goto sm30, delete the already generated maintenance screens and then regenerate them.
Regards,
Raj

Problem with table formatting

I'm having a lot of problems with tables not reflecting their formatting when I open them in a browser. I've tried opening in Safari, Firefox & Camino with the same results. For example, a row with the following html content has a much larger height & aligns the text to the top when opened in a browser:
<tr>
          <td height="15" colspan="3" valign="middle"><h6 align="center">Summer 2009</h6>
          </td>
        </tr>
If it matters, this is a row in a table nested in another table. Here's the code down to the row in question (all tags are closed properly in the remaining code):
<table width="600" border="2" align="center" cellpadding="0" cellspacing="0">
    <tr>
      <td align="center" valign="top"><img src="images/events.jpg" width="250" height="35"></td>
    </tr>
    <tr>
      <td align="left" valign="top">
      <table width="100%" border="0" align="center" cellpadding="1" cellspacing="0">
        <tr>
          <td height="15" colspan="3" valign="middle"><h6 align="center">Summer 2009</h6>
          </td>
        </tr>
I am using a style sheet for text. Here's the code for "h6" if that matters:
h6 {
font-family: Verdana, Geneva, Arial;
font-size: 14px;
font-weight: bold;
color: #660099;
Any ideas is appreciated. This is driving me nuts. Spacing and alignment sometimes work and sometimes don't work. Dreamweaver is supposed to make such things easier!
Kevin

Header tags are usually used round a bit of text, not parts of a table, and if you don't specify the margins on them, can force different amounts of space below in different browsers. Try making the bottom margin on h6 zero, and confine it to text within a cell.
Also, if you can upload your page somewhere and let us have the url it will be easier to troubleshoot.

Problem in Table maintenance view

Hi all,
i am getting some problem in table maintenance view.
In my table i have some fields and when i created my table maintenance view , it is created , but when i try to see it in SM30 its not showing my fields and even i am unable to create a new entry. when i click
new entries its going back to the sm30 screen..
How to go abt it
please help me

Hello,
Have you created the table maintanence view the right way.
You can get good help from below link: [[http://www.****************/Tutorials/ABAP/TableMaintenance/demo.htm]]
Also, please check the Delivery Class and Data Browser/Table View Maint. in the Delivery and Maintanence tab of the table.
Thanks,
Jayant
Edited by: Jayant Sahu on Nov 24, 2008 3:00 PM

Problem with tables -- need help!

I am having problems with table formatting, when using
Preformatted text. The tables look fine in the WYSIWYG editor, but
have lots of extra space above and below the text when looking at
the output files.
I will attach the code from one of the HTML files from my
project, so you can see what I'm talking about.
Thanks.

Well, if you're talking about the single-celled table with
the line:
<p class=Preformatted>[assembly:
Ace.AceAssembly]</p>
</pre>
... you can eliminate the <P> tags. that will give you
one line less. Otherwise, your remaining space is the result of the
<PRE> tag. It, like the <XMP> tag, gives it one line of
space beneath as well.
Your alternative beyond that would be to, when needed, wrap
up the script in Javascript. That line, for instance, wouldn't need
it.

What could be the problem with table REGUH

Hi exprts
i developed a report . its wrking ok in developemt system
but in Quality system ,
the below query is taking more time.
in quality even i have taken slection criteria which is very less than devlopment selection.
please tell me the below query is performance wise not good or
is there any problem with table REGUH in quality system?
IF NOT ( t_bsak_aux[] IS INITIAL ).
    SELECT laufd laufi xvorl zbukr lifnr rwbtr kunnr empfg"
           vblnr ausfd rzawe
      FROM reguh
      INTO TABLE t_reguh
      FOR ALL ENTRIES IN t_bsak_aux
      WHERE laufd <> space
        AND laufi <> space
        AND zbukr = t_bsak_aux-bukrs
        AND lifnr = t_bsak_aux-lifnr
        AND vblnr = t_bsak_aux-augbl.
thanks in advance
regards
neeru

Hi,
Using SPACE against the keys (LAUFI, LAUFD - specifically LAUFD) will most likely return no results. LAUFD, being one of the keys and the date which the program is supposed to run (considering that this is settlement data - it has already run) - implies that this field will be populated. Putting " = SPACE" in your where clause is saying that you want to find records from the table where those fields are not populated. That is fine for LAUFI, considering it is the indicator for a proposal only. In my requirement, my client did not want to see proposals but only real payment runs - therefore, LAUFI = SPACE is correct.
The reason you are having poor performance while selecting form this table is because it is a cluster table like bseg. This thread explains a little bit of why cluster tables are a performance nightmare when trying to select - although it is about bseg, you will get the idea:
http://blogs.ittoolbox.com/sap/db2/archives/select-from-bsegrfblg-performance-problem-14247
I'm trying to find an alternative to get bank account information regarding payments - I will post a reply if I am lucky to find one!
Good luck

Problem with table MBEWH

Hello SAP experts , im having a little problem with table MBEWH because the data i whant to extract isnt the correct one, i saw that this table stores all the prices for the materials and it groups them by year and by month but when i check to see what was the price for a specific material the price i had on that time periord inst the same as the one on the system, also i manage my material with baches and when i check to see if that batch was in that period of time it isnt so im really confused as to how the system saves the historical data on this table, thank you in advanced.
kind regards

read OSS note 193554 , it explains everything

Problem with Table control lines

Hi Friends,
This is the problem with table control lines:
I have screen with table control and I would like change the table control lines dynamicaly.
Exp:
In my PBO the Internal table which I am using to loop the TC is havig 7 records and its displayed with 7 records, now I have added one more record into my ITAB and now ITAB is having 8 records, when I am looping this ITAB with TC its taking the TC lines 7 only.
here is the code:
Initial values in gt_scr400 = 8
Initial values in tc_scr400 = 8
Now added one more recor into gt_scr400 , now gt_scr400 = 9.
LOOP AT   gt_scr400
       INTO wa_scr400
       WITH CONTROL tc_scr400
       CURSOR tc_scr400-current_line.
ENDLOOP.
I have used this logic :
DESCRIBE TABLE gt_scr400 LINES g_rec_300 .
tc_scr300-lines = g_rec_300.
but its not modifying the lines in my table control.
How to change the TC lines based on ITAB total records.
Thanks,
Sridhar

there is a field in TableViewName-xxx
don't remember the exact field name for (total no of records)
you can check it in debug. when you add records in Internal table, u need to modify this field which is set at the first time when table control is populated.

Problem with table paging [PDK for NET]

Hi All,
I have a problem with table paging in PDK for .NET (ver 2).
The Table has 14 visible rows.
The lead selection is set to "SINGLE"
When the user selects a row I can use
Table1.SelectedKeys(0) Mod Table1.VisibleRowCount
in order to get the info of the selected row.
If I will page using the "Prev/Next" page of the Table UI element it will also work.
However, when I press "Prev/Next" item and then select a row it chooses the wrong row.
(See picture: http://img509.imageshack.us/img509/3882/table5tq.jpg)
What can I do in order to solve the problem?
Thanks,
Omri

Hi Omri,
how are you doing ?
The SAPTable is similar to a DataGrid control and need to be bound to the datasource on every postback
a good idea is to keep the dataset available in the page or on the server ( so that you dont need to keep making expensive fetch operations
The selected row is affected by the recordset (dataset) and needs additional programming
A work around for the selected row issue is to save it in a server side hidden variable (or anything that will persist) and read and set the value in the page / next button handler
with respect,
amit

Bex analyzer - internal error problem with table c_t_variable

HI All,
When ever I try to refresh a query in Bex-Analyzer ,Iam getting "internal error problem with table c_t_variable".
Please advise
Edited by: Aparna Duvvuri on Jan 13, 2010 10:53 AM

Hi Aparna,
try to open the query in RSRT and debug the query.the error is due to some customer exit variable so try to debug the code for the variable and rectify it.
Thanks,
Ashok

Error "DATABASE PROBLEMS WITH TABLE MC11VA0HDRSETUP"

Hi Friends,
I got the following message when am trying to delete the setup tables.
" Error DATABASE PROBLEMS WITH TABLE MC11VA0HDRSETUP"
Am trying to delete the setup tables for application '11', but it gives me the above error. I have gone throug similar threads but it did not solve my issue.
Please can anyone provide a solution.
system detials:
R/3 release    - 4.6c
PI                 - 2004_1_46c
SAP_BW      - 30B
PI_BASIS     - 2003_1_620
Any information will be appreciated
Thanks,
VBR

Hi Kishor,
Thanks for your reply.
I have gone through that SAP Note 456102 and it was not of much help for our issue because we are ahead of PI that is mentioned in the note.
Can you send your email id so that i can forward the error screenshots.
Regards,
VBR

Problem with table maintenance

Similar Messages

Maybe you are looking for