Problem with Text file attachment

Hello All,
I am sending data from my program via mail in an attachment of text format in 4.6C. But the format of the data in the attachment is not correct. There is no line break in the data.
I've tried putting the line break manually by using hexadecimal code '09' as the line break. But it is not working.
Kindly suggest.
Thanks

Hello Brad,
I marked the problem as solved previously because the issue of all the lines coming together was solved.
So, I marked the question as solved.
Now, I have a different problem and rather than creating a new thread I opened this one only.
Thank you

Similar Messages

  • Email with Text File Attachement as Source

    Hi All,
           One of my interfaces needs to listen to incoming mails with an text file attachements.I wish to know how we can convert the text file contents into XML to further process it on the reciever side.

    Hi,
    To perform content conversion of a flat file, check these blogs,
    /people/venkat.donela/blog/2005/06/08/how-to-send-a-flat-file-with-various-field-lengths-and-variable-substructures-to-xi-30
    /people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
    Also, to understand file content conversion better, you can check this link on SAP Help,
    http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
    Regards,
    Bhavesh

  • Problem in text file attachment while sending to lotusnotes

    Hi friends,
    Good day. I am sending the ALV report data as a text file to lotus notes. I am getting the text file as an attachment and finding data while opening it. But data is not coming properly. I am getting some space in between two rows in text file.
    I am using below code to get new line.
    data: c_val type x value ' 0D'.
    concatenate c_value itab into itab.
    Actual Result
    testtesttesttesttesttesttesttesttesttest
    testtesttesttesttesttesttesttesttesttest
    testtesttesttesttesttesttesttesttesttest
    Expected result
    testtesttesttesttesttesttesttesttesttest
    testtesttesttesttesttesttesttesttesttest
    testtesttesttesttesttesttesttesttesttest.
    Please send some code to get the lines properly.
    Thanks
    Kumar

    use this :
    data: c_val type c value CL_ABAP_CHAR_UTILITIES=>CR_LF.

  • Receiver mail with text file attached without line feeds

    Hi, friends
    I have a text file  to mail scenario, where file must be attached to receiver mail.
    Receiver CC mail is protocol XIPAYLOAD and use mail package and keep attachment.
    In tab module, i have:
    Module name --> SAP XI Sample/ConvertCRLFfromToLF
    Module configuration --> mode LFtoCRLF
    The plain text file is attached to mail but there are no line feeds after the plain text lines.
    Thanks, in advance

    Stefan,
    This is not a Java mapping, it's an ABAP mapping.
    I've tryed also to insert this characters, but without success.
    In my abap class i have:
      data: l_newline type c value cl_abap_char_utilities=>newline.
      data: l_linefeed type c value cl_abap_char_utilities=>CR_LF.
      clear wa_string.
      incode = idocument->get_elements_by_tag_name( 'linea' ).
      length = incode->GET_LENGTH( ).
      do length times.
        outcode = incode->get_item( index = d_lines ).
        wa_linea = outcode->get_value( ).
        if wa_string is initial.
          wa_string = wa_linea.
        else.
          concatenate wa_string l_newline  l_linefeed crlf wa_linea into wa_string.
        endif.
        add 1 to d_lines.
      enddo.
      l_element_dummy  = l_document->create_simple_element(
                    name = 'Content'
                    VALUE = wa_string
                    parent = l_element_root  ).
    so...it's similar to your suggestion..
    Any other input, please?
    Regards,
    Carme.

  • Text file attachment in UTF-8 encoding

    Hi
    I have written a program which sends  mails to the users with text file attached. the problem is the text file when you save it to the local desktop ( by clicking on save as ) the encoding is by default ANSI. I want to make the encoding as UTF-8. Is it possible to change this in program?.
    thanks
    sankar

    OPEN DATASET - encoding
    Syntax
    ... ENCODING { DEFAULT
                 | {UTF-8 [SKIPPING|WITH BYTE-ORDER MARK]}
                 | NON-UNICODE } ... .
    Alternatives:
    1. ... DEFAULT
    2. ... UTF-8 [SKIPPING|WITH BYTE-ORDER MARK]
    3. ... NON-UNICODE
    Effect
    : The additions after ENCODING determine the character representation in which the content of the file is handled. The addition ENCODING must be specified in Unicode programs and may only be omitted in non-Unicode programs. If the addition ENCODING is not specified in non-Unicode programs, the addition NON-UNICODE is used implicitly.
    Note
    : It is recommended that files are always written in UTF-8, if all readers can process this format. Otherwise, the code page can depend on the text environment and it is difficult to identify the code page from the file content.
    Alternative 1
    ... DEFAULT
    Effect
    : In a Unicode system, the specification DEFAULT corresponds to UTF-8, and in a non-Unicode system, it corresponds to NON-UNICODE.
    Alternative 2
    ... UTF-8 [SKIPPING|WITH BYTE-ORDER MARK]
    Addition:
    ... SKIPPING|WITH BYTE-ORDER MARK
    Effect
    : The characters in the file are handled according to the Unicode character representation UTF-8.
    Notes
    : The class CL_ABAP_FILE_UTILITIES contains the method CHECK_UTF8 for determining whether a file is a UTF-8 file.
    A UTF-16 file can only be opened as a binary file.
    Addition
    ... SKIPPING|WITH BYTE-ORDER MARK
    Effect
    : This addition defines how the byte order mark (BOM), with which a file encoded in the UTF-8 format can begin, is handled. The BOM is a sequence of 3 bytes that indicates that a file is encoded in UTF-8.
    SKIPPING BYTE-ORDER MARK
    is only permitted if the file is opened for reading or changing using FOR INPUT or FOR UPDATE. If there is a BOM at the start of the file, this is ignored and the file pointer is set after it. Without the addition, the BOM is handled as normal file content.
    WITH BYTE-ORDER MARK
    is only permitted if the file is opened for writing using FOR OUTPUT. When the file is opened, a BOM is inserted at the start of the file. Without the addition, no BOM is inserted.
    The addition BYTE-ORDER MARK cannot be used together with the AT POSITION.
    Notes
    : When opening UTF-8 files for reading, it is recommended to always enter the addition SKIPPING BYTE-ORDER MARK so that a BOM is not handled as file content.
    It is recommended to always open a file for reading as a UTF-8 with the addition WITH BYTE-ORDER MARK, if all readers can process this format.
    Alternative 3
    ... NON-UNICODE
    Effect
    : In a non-Unicode system, the data is read or written without conversion. In a Unicode system, the characters of the file are handled according to the non-Unicode codepage that would be assigned at the time of reading or writing in a non-Unicode system according to the entry in the database table TCP0C of the current text environment.

  • Email attachment problems with "excel" files.

    I have just upgraded to the iphone 4 from the 3gs and since doing so any emails I receive with excel files attached will not open the attachment? These files openened with no problem on the same email account on my 3gs.
    Instead when I download the attachment and go to open it I am met with a page displaying....
    "Unable to read document.
    An error occured while reading the document."
    Has anyone else having this problem or even better anyone know what the fix is to get these files showing up?
    Any help would be appreciated,
    Kris

    After much frustration about excel files not opening and repeatedly not getting answers from apple, I think I might have found another way. It seems that the new apple OS does not support older versions of excel. By saving the excel file in question (Save As) to "Microsoft Excel 2007 Workbook" the Workbook opens just fine as an E-mail attachment. If you have macro's you can save as "Microsoft Excel 2007 Workbook (Macro Enabled)" and it works also.
    The Workbook in question as far as I was concerned was created in Microsoft Excel 2003.
    Hope this helps
    Apple needs to get on the ball. This was almost a dealbreaker with me.
    Android is looking better and better every day.

  • Solved: InDesign CC: Problems with text in text box: text flows around invisible object

    I just upgraded from CS4 to CC. I have two problems with text in some text boxes:
    The text seems to flow around invisible object that I cannot find or delete. It's as if there is a photo or other object behind the text box; but when I press COMMAND-a to select all, I don't see any such object.
    When I move this text box, the layout of the text within changes. For example, when the box is high on my spread, the text flows correctly within the box; but when I move it down, it flows around that hidden other object. For another example, when the box is low on the page, the text starts at the top of the box; but when I move the text box up, the text starts somewhere in the middle of the box.
    I have checked margins of the text box and the paragraph options of the text paragraphs (margins, indents, alignments). They all look OK.
    If I modify the text box, checking the box "Ignore text wrap", then the problem goes away; but then the text also will not flow around a real object that I want it to flow around.
    Solution:
    There were objects in a hidden layer on that one spread. It seems that in CS4 when you "select all" you would also select objects in hidden layers; but in CC it doesn't.

    Arthur, Garry
    Would be great if you could send the files as attachment in an email to [email protected]
    Else, you may post here using these steps: http://forums.adobe.com/message/3994281
    Thanks!
    - Neeraj

  • Sending mail with PDF file attachment ?

    Hi All,
    I have scenario File ---> Mail, monitoring FTP directory for PDF file and sending using mail attachment.
    At the moment i am using JAVA mapping to construct the mail package structure follow all the step in this blog : XI Mail Adapter: An approach for sending emails with attachment with help of Java mapping
    it is working if i am using text file but then how to encode the pdf content so i can send throught the mail adapter. ?
    Thank you and Best Regards
    Fernand

    Hi,
    Actually, i am using this java code below :
    try {
        //     create XML structure of mail package
        String output = "<?xml version=\"1.0\" encoding=\"UTF-8\"?>"
               + "<ns:Mail xmlns:ns=\"http://sap.com/xi/XI/Mail/30\">"         
               + "<Subject>" + mailSubject     + "</Subject>"
               + "<From>" + mailSender     + "</From>"
               + "<To>" + mailReceiver     + "</To>"
               + "<Content_Type>multipart/mixed; boundary=\"" + boundary + "\"</Content_Type>"
               + "<Content>";
        out.write(output.getBytes());
        // create the declaration of the MIME parts
        //First part
        output = "--" + boundary + CRLF
               + "Content-Type: text/plain; charset=UTF-8" + CRLF
               //+ "Content-Transfer-Encoding: 8bit" + CRLF
               + "Content-Disposition: inline" + CRLF + CRLF
               + mailContent + CRLF
        //Second part
        + "--" + boundary + CRLF
        + "Content-Type: Application/pdf; name=" + attachmentName + CRLF  
        //+ "Content-Transfer-Encoding: base64" + CRLF
        + "Content-Disposition: attachment; filename=" + attachmentName + CRLF + CRLF;
        out.write(output.getBytes());
        //Source is taken as attachment
        copySource(in, out);
        out.write("</Content></ns:Mail>".getBytes());
      } catch (IOException e) {
        throw new StreamTransformationException(e.getMessage());
    protected static void copySource(InputStream in, OutputStream out)
         throws IOException {
        byte[] bbuf = new byte[in.available()];
        int bblen = in.read(bbuf);
        if (!(bblen < 0)) {
          //String sbuf = new String(bbuf);
          //String encoded = Base64.encode(sbuf);
          // replace all control characters with escape sequences
          //sbuf = sbuf.replaceAll("&", "&amp;");
          //sbuf = sbuf.replaceAll("\"", "&quot;");
          //sbuf = sbuf.replaceAll("'", "&apos;");
          //sbuf = sbuf.replaceAll("<", "&lt;");
          //sbuf = sbuf.replaceAll(">", "&gt;");
          out.write(bbuf);
    This code working fine with text file but not for pdf file. because i got error in mail adapter :
    Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: com.sap.aii.messaging.util.XMLScanException: java.lang.NullPointerException; nested exception caused by: com.sap.engine.lib.xml.parser.NestedSAXParserException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: Unsupported character: 8f(:main:, row:11, col:4)(:main:, row=11, col=4) -> com.sap.engine.lib.xml.parser.ParserException: Unsupported character: 8f(:main:, row:11, col:4)
    I guest the problem because the mail adapter doen't accept pdf content insite the mail package.
    please advise me
    Best Regards
    Fernand

  • ID CS5: Problem with Text Wrap being Forgetful :(

    I am having a problem with text wrap. Whenever I open this INDD file I am working on now, some of the images shift from having what I call "actual" text wrap to having "false" text wrap. "Actual" text wrap *actually* wraps the text around the image as it is supposed to; "false" text wrap says that "Wrap Around Bounding Box" is applied to the image yet no text is wrapped. After opening the file, making sure to unset and reset the text wrap on each offending image to show an "actual" text wrap WITHOUT changing layer order, saving the file, closing, and reopening, some images have "false" text wrap again! This is a 77 page document with images on every page.
    Another occurrence is if I largely change the flowed text. If I must remove a paragraph on page 7, for example, then the "actual" text wrapped images on page 10, 12, and 18 change to "false" text wrapped images and I have to reset the text wrap on each image. There are often images in between offending ones that DO NOT change, but it doesn't seem to be the same ones each time. So once image A, C, and D will change to "false" text wrap, while B, E, and F are fine; the next time, A, B, and F are wrong and the others are fine. This is driving me crazy as I have never in 8 years of using InDesign encountered a problem using Text Wrap. Please note:
    Ignore Text Wrap IS NOT selected.
    The text box IS below the images.
    The copy is flowed throughout the document.
    Preferences>Composition>"Text Wrap Only Affects Text Beneath Selected"" DOES NOT FIX IT.
    "Wrap around bounding box" IS showing as selected for the image/images.
    There is NO CLIPPING PATH / PHOTOSHOP PATH / ALPHA PATH on these images.
    The images / text box order is not changed between being correct and being incorrect.
    Anyone else with this trouble? And, if so, how did you fix it? Thanks,
    A. Henson
    InDesign 7.0.3
    iMac i7
    8GB RAM
    OS X 10.6.6

    @henson26,
    I emailed you offline to see if you can provide me with an example file that shows the problem.
    Matthew

  • What is the exact problem with this file?

    Hi all,
    There is an old form , which was not in use from many days.
    Now when we tried to run the form, i got the error saying "FRM-40734:Internal Error:Pl/SQL error occured.", in the login form.
    When i tried to open the fmb file in Oracle Forms Builder 6i, i got the following error:
    FRM-10102: Cannot attach PL/SQL library d2kwutil. This library attachment will be lost if the module is saved., but the fmb file got open.
    The login button has the following code:
    DECLARE
      UNAME VARCHAR2(30);
      --USER_ID PARAMLIST;
      V_USER APUSERMA.USER_NAME%TYPE;
      V_PASSWED APUSERMA.USER_PASSWD%TYPE;
    BEGIN
    select user_CD INTO :GLOBAL.USER_ID from apuserma 
    where user_CD = :TI_USER_NAME AND user_PASSWD = :IT_USER_PASSWD
    AND SYSDATE BETWEEN USER_VALID_FRM AND USER_VALID_TO;
    :global.user_id  := substr(win_api_environment.read_registry('HKEY_LOCAL_MACHINE\system\currentcontrolset\control\computername\computername','computername'),1,10);
    :global.compname := :compname;
    compnm(:compname);
    --USER_ID := CREATE_PARAMETER_LIST('USER_id_NAME');
    call_form('Forms\MAIN_SCREEN',hide,DO_REPLACE);
    exception
      when no_data_found then
      MESSAGE('Incorrect Username or Password.  Please Re-Enter');
      message(' ');
      RAISE FORM_TRIGGER_FAILURE;
    END;
    EXIT_FORM;
    When i tried to compile, i got error saying ,
    Error 201 at line 10, column 28
    identifier 'WIN_API_ENVIRONMENT.READ_REGISTRY' must be declared.
    I am not getting to know What is the exact problem with this file?
    Help me with this please.
    Thank You.
    Oracle forms builder 6i.
    Oracle 9i.

    Vijetha wrote:
    I also want to know what is the use of  win_api_environment.read_registry('HKEY_LOCAL_MACHINE\system\currentcontrolset\control\computername\computername','computername') ??
    What does it do??
    If i comment the following line , will it be a problem??
    :global.user_id  := substr(win_api_environment.read_registry('HKEY_LOCAL_MACHINE\system\currentcontrolset\control\computername\computername','computername'),1,10);
    Because i commented the above line & compiled, so it is not giving any error now.
    So please tell me what win_api_environment.read_registry does??
    it's read windows registry value. So, no problem if you comment it.
    Thanks

  • How to send a text file attachment through mail in ECC 6.0

    Hi Friends,
    As per the requirement, I need to send a ALV report result as text file attachment to user in ECC 6.0 . I know how to do in 4.6C version. But the same code is not working here in ECC 6.0.
    Generally to get the data in new row in the text file we use below code in 4.6c.
    data: c_value type x value ' 0D '.
    concatenate c_value itab-line into itab-line.
    By using above code, we get each row of the itab in a new line in text file.
    Same code is not working in ECC6.0 as it is not supporting  to concatenate bytes with characters. Getting the error like " field c_value should be diclared as type C or I or N or T or P"
    Even I have used function module NLS_STRING_CONVERT_TO_SYS to convert hexa to char. It is converting the value' 0D' to ' # '. But it is not working.
    Could you please suggest me that how can get each row of itab as a new line in text file in ECC 6.0.
    Itab value:
    abcdefdfldjfñlkdsjfñldsjfdsñljñla
    fdsljfñldskjfldsñkjfñldsjfñldsajñld
    vcxusfcxusfcusafcxusafcusafcdsauc
    Actual result currently coming in text file:
    abcdefdfldjfñlkdsjfñldsjfdsñljñlafdsljfñldskjfldsñkjfñldsjfñldsajñldvcxusfcxusfcusafcxusafcusafcdsauc
    Expected result in text file:
    abcdefdfldjfñlkdsjfñldsjfdsñljñla
    fdsljfñldskjfldsñkjfñldsjfñldsajñld
    vcxusfcxusfcusafcxusafcusafcdsauc
    Please do the needful.
    Thanks
    Kumar

    hi,
    Try this function Module
    CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1 '
    *example code
    ******* Create Message Body Title and Description****************
      i_objtxt = 'test with pdf-Attachment!'.
      append i_objtxt.
      describe table i_objtxt lines v_lines_txt.
      read table i_objtxt index v_lines_txt.
      wa_doc_chng-obj_name = 'smartform'.
      wa_doc_chng-expiry_dat = sy-datum + 10.
      wa_doc_chng-obj_descr = 'smartform'.
      wa_doc_chng-sensitivty = 'F'.
      wa_doc_chng-doc_size = v_lines_txt * 255.
    **** Main Text*****************************
      clear i_objpack-transf_bin.
      i_objpack-head_start = 1.
      i_objpack-head_num = 0.
      i_objpack-body_start = 1.
      i_objpack-body_num = v_lines_txt.
      i_objpack-doc_type = 'RAW'.
      append i_objpack.
    **** Attachment (pdf-Attachment)*************
      i_objpack-transf_bin = 'X'.
      i_objpack-head_start = 1.
      i_objpack-head_num = 1.
      i_objpack-body_start = 1.
      i_objpack-body_num = v_lines_bin.
      i_objpack-doc_type = 'PDF'.
      i_objpack-obj_name = 'smartform'.
      concatenate i_objpack-obj_name i_objpack-doc_type into
    i_objpack-obj_descr separated by '.'.
    *  I_OBJPACK-OBJ_DESCR = 'test'.
      i_objpack-doc_size =  v_lines_bin * 255 .
      append i_objpack.
    * Länge des Attachment ermitteln
      clear i_reclist.
      i_reclist-receiver = 'email address'.
      i_reclist-rec_type = 'U'.
      i_reclist-express = 'X'.
      data: tab_lines like sy-tabix.
      describe table i_objbin lines tab_lines.
      append i_reclist.
      call function 'SO_NEW_DOCUMENT_ATT_SEND_API1'
        exporting
          document_data              = wa_doc_chng
          put_in_outbox              = 'X'
          commit_work                = 'X'
        tables
          packing_list               = i_objpack
          object_header              = wa_objhead
          contents_bin               = i_objbin
          contents_txt               = i_objtxt
          receivers                  = i_reclist
        exceptions
          too_many_receivers         = 1
          document_not_sent          = 2
          document_type_not_exist    = 3
          operation_no_authorization = 4
          parameter_error            = 5
          x_error                    = 6
          enqueue_error              = 7
          others                     = 8.
      if sy-subrc <> 0.
        write:/ 'Error When Sending the File', sy-subrc.
      else.
        write:/ 'Mail sent'.
      endif.

  • Mail Adapter: How to send data as a simple text file attachment?

    Hi All
    I have a proxy to file scenario, where i write data to a text file.
    Now, i need to have a second receiver. I have to send an email, with the above file as an attachment, to this receiver.
    How can i do this?
    How can i send the data as a text file attachment to the receiver?
    Many Thanks
    Chandra

    Hi,
    To send the message to the second receiver you need to have:
    1) Necessary mail message format (can download from service marketplace)
    2) Receiver mail communication channel.
    3) Create the necessary Configuration Objects .... Receiver Determination, Interface Determination, Receiver Agreement.
    3) You can do a XSLT mapping (if required)....if no complex logic is needed then you can do a simple Message mapping.
    4) In the receiver CC make sure that you check the Adapter Specific Message Attribute checkbox.
    For more info you can refer my answer in this thread:
    Re: xml in mail
    Also refer the blog:
    /people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter
    Regards,
    Abhishek.

  • We have a mac laptop and dont have any problems with pdf files but our imac will not open them.  any suggestions

    we have a mac laptop and dont have any problems with pdf files but our imac will not open them.  any suggestions?

    Back up all data.
    In the Finder, select Go ▹ Go to Folder from the menu bar, or press the key combination shift-command-G. Copy the line of text below into the box that opens, and press return:
    /Library/Internet Plug-ins
    From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
    If you still have the issue, repeat with this line:
    ~/Library/Internet Plug-ins
    If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

  • I am trying to get the free trial to cc but it said there seems to be a problem with the files (Error code: 205)

    I am trying to get the free trial to cc but it said there seems to be a problem with the files (Error code: 205) please help

    BOILERPLATE TEXT:
    Note that this is boilerplate text.
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    etc.,
    someone may be able to help you (not necessarily this poster, who is not a Windows user).
    a screen shot of your settings or of the image could be very helpful too.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • Problems with .ARW files and auto toning

    problems with .ARW files and auto toning
    let me try to explain this because this has happened in past and never found a way to resolve but i lived with it
    now that I have a Sony A7R the problem is more serious
    Firstly i take pride it making the picture happen all in camera, i use DRO lvl 5 to get enough light, like when i'm shooting at dusk. DRO its like doing HDR but in a single file, it lightens the darks. in my camera i'm happy with results
    but when I upload them to lightroom, they come out near black.
    allow me to explain
    lets say I import 100 images
    i double check my preferences and everything is UNCHECKED when it comes to importing options, there is no auto toning, nothing.
    as the images import i see a preview in the thumbnail which looks fine.
    i double click on one to enlarge it, hence leave grid view.
    for a brief 1 or 2 seconds, i see the full image in all its glory but than lightroom does something funny, it darkens the image
    one by one as it inspects each image, if it was a DRO image it makes it too dark.
    to make this clear, the image is perfect as it was in the beginning but after a few seconds lightroom for some reason thinks it needs to correct it.
    how to prevent lightroom from doing this, i want the image exactly as it is, why must lightroom apply a correction>?
    i think it has to do something with interpreting the raw file and lightroom applies its own algorithm.
    but here is what i dont get.....before lightroom makes the change i'm able to witness the picture exactly as it was taken and want it unchanged..
    now i have to tweak each file or find a profile for it which is added work.
    any ideas how to prevent lightroom from ruining my images and just leave them as they were when first detected...
    there are 2 phases...one is when it originally imports and they look fine
    second is scanning each image and applying some kind of toning which darkens it too much.
    thanks for the help

    sorry thats the auto reply message from yahoo email.
    i've disabled it now
    thing is, there is no DRO jpg to download from the camera
    its only ARW. so my understanding is when i use DRO setting, the camera makes changes to the ARW than lightroom somehow reads this from the ARW.
    but then sadly reverts it to no DRO settings.
    because i notice if i take normal picture in raw mode its dark but if i apply dro to it, it comes out brighter, yet when i d/l the image from camera to lightroom, which is an ARW - there are no jpgs. lightroom decides to mess it up
    so in reality there is no point in using DRO because when i upload it lightroom removes it.
    is there a way to tell lightroom to preserve the jpg preview as it first sees it.
    its just lame, picture appears perfect...than lightroom does something, than bam, its ruined,.
    what do i need to do to prevent lightroom from ruining the image? if it was good in the first place.

Maybe you are looking for