Problem with the cfg-wizard - Service Registry and SLD Client
Hi,
I try to complete the initial activity for configuring the Registering Services Registry instance in SLD (http:
localhost:port\nwa\cfg-wizard) but when i start the wizard i found this error:
Error: Getting WBEMClient failed: com.sap.sldserv.exception.SldServiceRuntimeException: Destination SLD_Client not found. Destinations are defined in the Destination service.. Please check that destination SLD_Client is maintained correctly.
I don't know what is that error. Anyone can help us?
regard.
Hi ,
I am facing an issue while running SLD configuration wizard in SAp NW 7.3.
Find the error message below.
com.sap.sldserv.exception.SldServiceRuntimeException: Getting WBEMClient failed: com.sap.sldserv.exception.SldServiceRuntimeException: Destination SLD_Client not found. Destinations are defined in the Destination service.. Please check that destination SLD_Client is maintained correctly.
Can anyone guide on this issue.
~Viswanathan
Similar Messages
-
Problem with the Browsing of Services Registry in Visual Composer
Hi,
I have tried to connect Visula Composer of CE 7.1 to the Services Registry for ES Workplace by configuring 3 Web Service destination on my local server:
1. UDDI_DESTINATION
2. CLASSIFICATION_DESTINATION
3. Backend destination "HU2"
as stated in the tutorial "How to Browse an Enterprise Services Registry in Visual Composer" (https://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/605303db-9d5f-2a10-e0a2-c0e1c8af9e96&overridelayout=true).
After the configuration, I opened up the "Search" dialog in Visual Composer and selected "Service Registry" for the "Search in" drop down list and then clicked on the link "Advanced Search". An error message "XMSG_COULD_NOT_LOAD_CLASSIFICATIONS" was then displayed. I have tried to google the error message but to my surprise there wasn't even a single result for that.
Could anyone please help me on this?
Thanks in advance.
Regards,
Joon MengHi Mike,
Thanks for your reply. It is actually my intention to try out with the Services Registry for ES Workplace. The thing is, I was able to connect my NWDS to the SR, but not in Visual Composer.
Below are the URLs for both destination.
1. UDDI_DESTINATION: http://sr.esworkplace.sap.com/uddi/wsdl/uddi_v3_service.wsdl
2. CLASSIFICATION_DESTINATION: http://sr.esworkplace.sap.com/ClassificationService/CS?wsdl
I tried to open the first URL in my browser and a WSDL document was displayed, but for the second URL an error message "503 Service Unavailable" was returned.
Does this mean that the second URL "http://sr.esworkplace.sap.com/ClassificationService/CS?wsdl" might be the cause of the problem?
Regards,
Joon Meng -
With my i phone 4 , the Push notifications doesn't work for apps like (fb viber , whatsapp etc ) it only works for the official apps like message even when im using the phone, has this probleme with the iOs 6.0.1 and also with the iOs 6.1
This isn't an issue. Notice the screen prior to the one that shows usage has an iCloud section and a Manage Storage button. For this button to activate ios needs to download a few kb from icloud. Switching back to this screen forces ios to download those few kb.
-
I have a problem with the synchronisation of my iPhone and iPad with Outlook 2007 on my 64-bit Windows 7 PC. For several years,
I have had no problems with the synchronisation by cord connection and iTunes between these programmes. However, a few months ago I decided to use Mobile Me. However, there were problems with duplication of calendars and then “rogue events” – which could not be deleted – even if deleted on Outlook and on the iPhone (or both at the same time) – they would just reappear after the next synchronisation. All other synchronisation areas (eg Contacts, Notes etc) work fine.
I have looked for help through the Apple Support Community and tried many things. I have repaired my Outlook. I have repaired my .pst file in Windows. I have re-installed the latest version of iTunes on my PC. I have re-installed the firmware on my iPhone. I have tried many permutations on my iPhone. I have closed down all Mobile Me functions on the iPhone. I have spent upwards of 24 hours trying to solve this problem.
What am I left with? Outlook works seamlessly on my PC. My iPhone calendar now has no events from my calendar, but does not synchronise through iTunes. Nor does it send events initiated on the iPhone to the Outlook. I am at the point of abandoning iPhones and iPads altogether. I need to have a properly synchronising calendar on my phone. Do you have any suggestions?In the control panel goto the "Lenovo - Power Manager" and click the battery tab, there is a maintenance button in there that will let you change the charging profile for your battery. (from memory, so exact wording may be off)
The lower the numbers you use there, the longer the battery *should* last. These batteries degrade faster at higher charge levels, however storing them at too low of levels is also not good for them... I've read that 40% is optimal, but just not realistic if you use your computer.
--- ThinkPad T61 / Win 7 / Core 2 / 4gb RAM / Nvidia / Still used daily --- ThinkPad Edge 15/ i5 / Win 7 / TrueCrypt / 8gb RAM / Hated it, died at 1 yr 1 mo old --- ThinkPad T510 / Win 7 / TrueCrypt / i5 / 8gb RAM / Nvidia / Current primary machine --- ThinkPad X220 / i7 / IPS / 4gb / TrueCrypt / My Road Machine -
Problem with the fiells MEINS(PO Unit ) and MENGE(Quantity) .
Hi experts
I am having problem with the fiells MEINS(PO Unit ) and MENGE(Quantity) of the datasource 2lis_02_acc .
I have created custom cube and have mapped the fiels MEINS to infoobject 0PO_UNIT and MENGE(Quantity) to infoobject 0CPQUAOU.
Now the data is successfully loaded in the cube but the values of the above 2 fields are getting changed.
In r3 the value for MEINS is "AU","EA" , "H" etc but this field value is getting converted to "LE" in the cube and also the field MENGE(Quantity
) in r3 is for example "1" it is getting converted to 3 in the cube. do u have any idea what is the problem.
The rule type is direct assingment and there is no routine .
Any clues.
Thank you.holy devilz wrote:
Hi experts
> I am having problem with the fiells MEINS(PO Unit ) and MENGE(Quantity) of the datasource 2lis_02_acc .
>
> I have created custom cube and have mapped the fiels MEINS to infoobject 0PO_UNIT and MENGE(Quantity) to infoobject 0CPQUAOU.
> Now the data is successfully loaded in the cube but the values of the above 2 fields are getting changed.
> In r3 the value for MEINS is "AU","EA" , "H" etc but this field value is getting converted to "LE" in the cube and also the field MENGE(Quantity
> ) in r3 is for example "1" it is getting converted to 3 in the cube. do u have any idea what is the problem.
> The rule type is direct assingment and there is no routine .
> Any clues.
> Thank you.
Hmm, your system should consider the alternative UOM maintain in the material master.
Each material in SAP has its standard, base unit of measure (stored in MARA-MEINS). To allow using alternative units, those can be maintained per material in table MARM. So, assuming the Base UoM is only considered (for LE), it converts material quantity from one unit to another, most likely from alternative units to the base one. So, changing that settings must solve. http://goo.gl/JuZlm
Alternative steps:
1.Goto MM42 (Assuming there's no BAPI req?)
2. change po unit from basic unit to other -> save OK
3. change po unit from other to basic unit -> save OK
Also, MD63 shows all data in the base unit of measure.
If you want to explore basic steps, goto RSD1 > Additional > Alternative UoM.
Best Regards, @{ -
i have problem with the firmeware file...and I do not know what is that
Make sure you are updating your phone the correct way, by connecting to iTunes and clicking Check for Updates on the Summary tab of your iTunes sync settings. Do not try to download the firmware file from the internet first. Also be sure iTunes is up to date before updating.
Delete the existing firmware (.ipsw) file and try again. You will find it at one of the following locations:
Mac OS X: ~/Library/Application Support/MobileSync/Backup
Windows XP: %AppData%\Apple Computer\MobileSync\Backup
Windows Vista: %AppData%\Roaming\Apple Computer\MobileSync\Backup
Windows 7: %AppData%\Roaming\Apple Computer\MobileSync\Backup -
Problem with the importing wizard
Hei,
I have a dll which I want to import to the Labview project. So, I decided ti use the import wizard, but when parsing the header file, Labview freezes. I am using a couple of structures (3) and a handle. I have also read that the wizard has problems when dealing with complex data. What would be best solution for adding it to the project? To in a way "unbundle" the struct and then create a many simple variables and then parsed to dll. (This would be a pain)
How to deal with the handle or will wizard easy understand that?
I am really looking for a painless solution
thanks for the helpCan you post the header file for the DLL?
Through a process of trial and error you could determine which functions causes problems with the wizard (comment out half the functions, attempt to import, repeat) and then manually create the LabVIEW VIs for the troublesome ones. If there aren't too many functions, you could do it all by hand, which isn't that hard if you have some understanding of C (and if you don't, you'll undoubtedly have other problems when the wizard doesn't do the right thing). -
I updated the ITunes on the computer and that went ok, but when i went to go and update the IPhone 4 it went to restore it to the factory settings and then something happened where it wouldn't let it update and now the phone is stuck in Limbo world with the apple symbol showing and a status bar, but nothing else. also the phone is not showing up as being plugged in while in this limbo faze.
Yes. I had problems with Firefox 3.5. The primary problem was very slow or never-ending loading of certain websites (particularly secure sites and sites with many features). I also have had similar, but not as bad, problems with Safari 4. I never had these problems with Safari 2 or Firefox 2. It just seems that with each update, the problems increased for me. I have read the Safari and Firefox forums and tried many fixes with little improvement. I have come to the conclusion that there is some kind of compatibility problem between the latest versions of Safari and Firefox and Shockwave Flash and/or Javascript and OS 10.4, particularly on PPC Macs. I expect there are many who will disagree and I cannot argue or prove the point. This is just my opinion. And I recognize that my problems could be caused by my setup and not by the browsers. By the way, I do not use any add-ons with any of my browsers. Anyway, I got tired of dealing with it and installed the latest version of Camino about 2 weeks ago. I also did a clean install of Firefox 3.0.13. Camino is working out great for me. It is simple and it works. No problems at all. So currently I am using Camino as my primary browser and Firefox 3.0.13 as my backup. I hope this helps.
-
Problems with the link between PXI chassis and PC via MXI-4
MAX display the chassis with a yellow exclamation point, and the MXI-4 conection monitor indicates taht the connection to the chassis has timed out.
Under the windows device manager appears PCI std PCI-to-PCI bridge and MXI-4 connection monitor working properly.
The system has bben working properly for one year and suddenly start to fail.
I've tried to uninstall fromn device manager and reinstall again, and teh problem continues. When the PC starts detect new hardware and reinstall from CD with MXI-4 software for windows v 1.0
Only the led PWR lights. The link indicator remains always off, from power up continuously. The cable connection has benn checked ok.
The chassis is powered up in the proper sequence, first the PXI chassis, and the the PC.
Operating system windows XP service pack 2; latest update KB835732 30/12/2004 (V 6.2)
labwindows/cvi (fds) 7.0
ivi compliance oackage 2.1.2
max 3.1
ni-daq 7.3
visa 3.1
chassis pxi-1000b with PXI-8331.Hello,
it could it be an incompatibility with the desktop PC (maybe?). I know of cases in which the PCI board can be incompatible with a certain PC for various reasons (PCI bus not 100% compliant to PCI standards, PCI power rails, PCI bus-master capabilities, motherboard/chipset issues, etc..).
I mean, has the PC been changed?
Wich PC model/brand is it?
Have you tested it on another of PC (another model)?
In case you have already tested your mxi-4 in other PCs and the behavior is the same, I suggest you to contact your local NI office for assistance.
Regards,
Jorge M. -
Problems with the Setup Wizard for WRT54GC
Hi…
I just bought a WRT54GC router and while trying to install it I had some problems.
I opened the Setup Wizard on the CD to install the router.
When I reach step 6 the internet connection is being checked with the following result: “Unable to detect the internet connection. Please check your cable connections”.
I’ve checked all the cables and everything is okay – I’m also able to access the internet which shows me that all cables are correctly connected.
So why do I get this message?
What do I have to do?
The problem is that I’m not able to continue the Setup Wizard further than step 6.
Thanks!well..if you have an internet connection through the router and the CD setup shows “Unable to detect the internet connection. Please check your cable connections”. I would recommend you to neglect it....discard the CD and configure the router manually
you can access the router from the wired computer using http://192.168.1.1 .. the default password is admin -
My system consists of differents vi´s.Some of them are used to read analogic inputs and digital inputs, using the serial port.
The values that I read, go through differents vi to be proccesed, and at the end, these values are written in a file, all the values in the same file.
My problems of synchronization are:
1. I have one vi per input, and all of them use the same serial port. How can I synchronize them to avoid serial port conflicts? (using queues??) And how can I do, to get differents number of samples/sg with every vi? I have to introduce them in differents loops?
2. The other problem is that, for example, I want to read 8 samples/ s but I only want
to write two samples every second. How can I do to avoid stoping the data flow?
Maybe, my problem is that I want to see the system like
one block, and I am ignoring that, although all the system works like a block, every part works using a different "speed". I don´t know how tools can I use to combine two ideas, working like an only system( data dependence, some vis need the data of others vi to be able to work) and working getting differents numbers of samples/s.
I have seen that there are synchronization vis. I am going to glance at them, maybe I find something interesting but I amsure that your help will be very useful?
Thanks in advanced!!
GraciI think you are pretty much on the right track with Queues. I have implemented a very similar system myself using queues. I have even different systems connected to the serial interface, but I can synchronise them all easily using the following method:
1) Make a VI for opening the serial port and reading the data. The data (parsed to extract the numbers required) are then stored in an array (Shift register). If the pre-determined time delay is reached (say 5 seconds) the values are averaged and written to a Queue with a defined data type. Save the VI as a VI template.
2) Make a VI which starts an instance of this template VI for every channel you require. You can use VI Server to set values on the new front panel before you set it's property to "running". Setting a timer value for all can help ensure that the X-Axis of your timing values (if you require) are synchronised. The clue here is to define and initiate a QUEUE per channel. (RS-232_1, RS-232_2 and so on). The QUEUE name needs to be passed to the VI Template before running so that each VI running in the background has an individual link to the main program.
The second part of this VI simply uses an array of QUEUES, polling them one after another with a timeout of, say 5 ms. If data is found, append accordingly to an XY-Graph.
I also add in some "Auto termination" in the VI template (MAx number of values allowed in the QUEUE for example) to allow for the background processes to find out if the front-VI is still running or not. There are many different ways to do this, shoose the best for your application.
With this approach, it's not even important what instrument is connected as long as data is written in a specified format into a known QUEUE. I have also developed systems where I can transparently (almost) drop in VI Templates for instruments with similar functionality (output data) from different suppliers.
I would post an example, but the time it would take me to clean it up is too large. Sorry. If you have any further questions, don't hesitate to ask further questions.
Shane.
Using LV 6.1 and 8.2.1 on W2k (SP4) and WXP (SP2) -
Problems with the batch in transaction MB1A and MB21
Hi everybody, I am new in the MM module. I am having a problem with transaction MB1A and MB21, when i try to select a batch for the movement 901. if i click the match code for the material's batch, the system shows me all the batches for the material, but some of these batches don't have available quantity stock and order creates the reservation or the material output. The system dont allow negative stock. Do you have any idea of this problem? Regards.
Hi,
In IM, when you select a batch with possibile entries, system always shows the available batches no matter whether stock is there are not.
However, if you setup batch determination strategy for example, when you are processing in MB1A, SAP fills the batch based on the criterion you define in:
MBC1Logistics -->Materials Management -->Inventory Management -->Environment -->Batch Search Strategy -->MBC1 - Create
Select appropriate strategy (if defined in your system, say for mvt ty)
maintain search strategy and sort criteria for your movement type here.
Hope this helps! -
I have tried to solve the mailbox problem with exchange.
It all works fine with iPhone and iPad.
Can anyone in Apple solve these problems?First this is not Apple. This is a user forum. We are all users like yourself helping each other. Your description of your issue is very vague and incomplete. What exactly is the problem?
-
Problems with the Updater 03-23-2006 and the Nano
FYI.. My problem and resolution with my NANO and the 03-23-2006 updater version.
Problem: My NANO refused to charge while connect via a powered USB port on my computer.
Symptoms: On intial connection the "DO NOT DISCONNECT" message would display for approximately 10 seconds, then my NANO would "disconnect" and the NANO menu screen would appear. While my NANO would not charge, I could update songs via Itunes with out a problem.
Troubleshooting: Connected my Video IPOD to the same cable and USB port to determine if there was a problem with either the USB port, Cable or the NANO itself. The Video IPod connect immediately and began to charge. Therefore I concluded the problem laid with the NANO itself.
The battery indicater was in the red, did some minor research and saw that there are a few posts about charging an IPod if the battery was low and they indicated some problems do exist. So I charged my NANO with the Apple power brick and the same cable, and viola it began to charge and completed the charge within a few hours.
Plug the NANO back into the PC and again no go. Within 10 seconds the menu screen was displayed, but I still could transfer songs but it would not charge.
Solution 1:. Reset my NANO, but symptoms still existed. I performed a soft reset via the NANO menu, and I did a hard reset using the MENU and SELECT buttons.
Last weekend I updated both my IPOD Video and NANO with the latest updater 3.23.2006. This problem did not exist prior the latest update (NANO had worked flawlessly since I purchased it in mid Febuary).
Solution 2: Restored NANO back to the orignal firmware version, and problem has not occured since. NANO now charges when connect via a power USB port. All seems well.
Homegrown Windows 2000uhm tried it but it didn't work still my ipod is still not charging via USB
-
The details are listed in the question. However when I try to send an email message I get a message that says mail can't be sent but when I look in my sent file it shows the message sent.
yes it should be covered using 1 year warranty. You cant get refund unless you have some customer protection program. So call applecare, I dont know the number in the UK.
Maybe you are looking for
-
Having had the previews created I selected all photos and "delete previews". It did this quickly and no more previews being created. Once aperture is closed and then re-opened aperture immediately sets about creating the previews for the same photo
-
Looking for app to sync music, movies, and playlists
Apple products use iTunes to sync music, movies, and playlists, what is a good app for the Android? There have been a few mentioned in other posts, but nothing that will sync the playlists also...
-
Any Advice for 4:3 and 16:9 Menu DVD Authoring / Scripting?
Hi all, Working on my first DVD with both 4:3 and 16:9 menus. I was wondering if anyone has advice, pointers, things to watch out for, tips, etc... I want it to be completely automated so I am using scripts to check SPRMS, jump to menus depending, et
-
The problem is that the phone stopped detecting the sim suddenly Vovi her out and replaced and it worked but it has happened again and no longer detected at all ... the card was cut at the store because it was not microsim format could be this the ca
-
KeyNote Crashes : "EXC_CRASH (SIGABRT)"
Hello. I have a KeyNote slideshow that loops. After 5 hours or so, all of a sudden, it's begining to crash the application down. It's file size is only 35MB, running on a MacMini Intel Core 2, 2GHz, 2GB RAM. No other application is running in the