Problem with the clock widget

Hi,
I would like to know if someone have a problem with the clock widget after doing the update system to Mac OS X Mavericks (v.10.9), cause the appearance of my clock was like this (attached image). Pay attention for the position of hands of the clock (watch hands): Don't have something strange?
Anyone know how to fix this problem?
Thanks in advance.

Hi, I have the same problem, I have done a fresh install of OS X and still did not fix the clock ... For when a new update?
Thanks

Similar Messages

Is anyone having problems with the stock widget not updating?

Is anyone having problems with the stock widget not updating?

Widgets unfortunately have gone by the wayside since Apple introduced the App Store a couple years ago. No widget has received any official recognition in the Apple listing of Widgets since that time. So it is entirely possible the widget has gotten redirected. There are many other Apps for stocks. I personally like the Nasdaq Quote website since it knows mutual funds and other markets as well.

Has anyone had problems with the clock app in iOS 6?

The clock app has been updated and now allows me to use a song as my alarm tone. Have been wanting apple to do this for a long time. Problem is that when alarm goes off I get no sound. The phone just vibrates. I do not have the phone muted. Guessing this is a glitch in the app? Anyone else having similar problem?

Been using iOS 6 now for a couple weeks on an iPad 2 and twice have relied on it as an alarm clock. Both times it's failed to play the song I've designated as the alarm. I've tried it with the cover open and closed, volume maxed and not. Each time, after the designated alarm time, I've opened the iPad up & entered the security code only to be greeted by the alarm message pop up. That's it.
Kinda frustrating, to say the least.
Am I using it incorrectly? Having used the clock on the iPhone this way in earlier versions of iOS, I've never had an issue. Would like to leverage this functionality, but being 0 for 2, not sure I want to risk a third time...
Thoughts?

I'm having problems with the Spry Widgets, Help!

I'm using Dreamweaver CS6 and Have installed it twice, to no avail. When I try to insert any of the spry widgets, I get the HTML code for the widget but none of the javascript or css code and I cannot figure out why. Also, The Spryassets folder never get created. Is there anyone that help me figure out what I might be doing wrong. If all you got is "Spry is no good, use Javascript", then don't bother responding. All other useful suggestions are greatly appreaciated,
K

Hi Fehmi76,
The article linked below details how to go about seeing what apps on your iPhone are using what amounts of space.
See how much storage you've used on your iPhone, iPad, and iPod touch
https://support.apple.com/en-us/HT201656
Regards,
Allen

Mac with boot camp. i got problem with the clock .. help please ..

hi. im using macbook pro. my mac hav been install with boot camp. so now i run two operating system. mac n windows 7 (64 bits) but i can set my clock time correctly for both my OS.. how can i solved this .? i hav doing google search about this... but i found nothing.. can sumone help me

Your OSX psrtition and your Boot Camp partition are completely separate. You can reinstall Mavericks without affecting Boot Camp and you can redo Boot Camp without affacting OSX.

Problems with the Spry Content Slider Widget in DW6

Hello there,
I have been wrestling with a problem I'm having with the Spry Content Slider Widget that I hope someone has an answer for.
I have 2 widgets on a page, but the problem I'm having occurs whether there is 1 or 2 on the page.
No matter how many slides I have in the widget, it only shows the first 3. The 2 widgets per page occurs on every html page (9 in total.)
In there a setting in the inline or linked .js code limiting the number of slides to 3?
In addition to these widgets, I also use a DWUser_EasyRotator Slider on the pages, and both the easyRotator and Spry Widgets launch a fancyBox jQuery Gallery. Tho it's a possibility, I don't think the mixing of sliders/js is the problem, as I was having the problem with the Spry Widget showing only the first 3 upon the first insert of the Widget.
Any suggestions on settings I should be aware of, as regards the Widget, would be greatly appreciated… (;

On line 66 of your code, you have an extra </head> tag that doesn't belong. Remove that and validate your code again.
http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Fwww.gallerynumber9.com.au%2Findex ---778.html
Nancy O.

Problem with my clock

I've updated my 3GS yesterday to 4.2.1 and have now problems with the clock. My iPhone is still in the German summer time. Synchronising again this morning didn't solve the problem.
Well done Apple, this caused a morning in unnecessary rush this morning. I was hoping Apple learned from the big issues in Australia with the alarm clock after the last update.
Cheers

Right now this is the Slipknot - Scream, does this not enought ?

Problem with Dashboard Details Widget

Hi!
I'm using SCOM 2012R2 UR 4 running og SQL 2012R2 with 3 MS. I have problems with the Details widget on my Dashboards. The problem is that when I select an object, no data is showing up in the details widget - see picture.
I've deleted the "Health Service State" folder on all MS's and restarted them. I've also started the console witn /clearcache without luck.
In addition I've created an SQL maintenance plan running sp_updatestats every 30. minutes, but it
still fails...
What should I do?
Best regards
Rune Haugen

Rune Haugen you are right.
1) try to restart the opeations console with /clearcache
2) try to import the following MP again an make sure that their version number is 7.1.10226.1046
Microsoft.SystemCenter.Visualization.Library.mpb
Microsoft.SystemCenter.Visualization.Component.Library.mpb
Microsoft.SystemCenter.Advisor.mpb
Microsoft.SystemCenter.Advisor.Internal.mpb
Microsoft.SystemCenter.2007.mp
Roger

Satellite A60 - Conflict with the clock

Greetings, I have a problem with a Toshiba Satellite A60, is this: the PC clock advances one second as time goes 4 seconds, ie in the pc are the clock is 9:29:17 and the same time but to change one second on the pc, is like this: 9:29:18 and the clock has advanced 4 seconds running 9:29:21, and disassemble the laptop and check the internal battery of the board and is soldered to the pc, if you can not take off, but I believe that working with the battery of the laptop, the pc does not have windows installed, in fact I'm going on no hard drive and entered the BIOS and still gives the error.
That could be? I suggest they do? Thank you.
My language is Spanish, so I apologize for my English.

Hey mate,
To be honest I really dont know what mean exaclty. I only understand that you have problems with the clock.
The RTC (BIOS) battery can be charged if you leave the notebook connected to AC/DC adaptor. This also loads the RTC battery.
Check this!!!

My Client is having a serious problem with the Contact Form Widget

My Client is having a serious problem with the Contact Form Widget that I can not figure out how to correct.
I created a website for a client and inserted a Contact Form widget on their 'Contact Us' page. Whenever anyone uses the form, the e-mail my client receive shows my e-mail address as the sender. So, when they 'reply' to the e-mail, the reply is sent to me and not the person who sent the original message. This creates a major problem in that I get barraged with e-mail replies while my client's potential customers go without a response.
When I look at 'Site Manager > System E-Mails > Workflow Information > E-mail From Address' on the site's Admin Console, it shows my e-mail information. Is this is what needs to be changed? If it is, what needs to be placed in that field so that the e-mail my client receives shows the senders e-mail information in the 'From' field. My client wants to be able to click reply and have the message sent to the right party. They would be very upset if they have to cut and past the senders e-mail address from the body text on every contact they receive.
Their feeling is that if I can't find a way to make the contact form work the way it should, then it's useless to them.
Can anyone help me figure this out? I really don't want to disappoint my first client.

Are you on a plan that has the CRM feature that stores your customers' data? If so, the idea of the contact form is that you'll receive a notification that there's been an inquiry filled out on your contact form and there should be a link in that email notification that leads to the "Case" that was created when that customer filled out a contact form. You can click that link and visit the case for that customer in your BC site and reply to them from there so that all of the correspondence is logged in the CRM for safe-keeping and for your records.
If your client finds this is too much work to login to BC to reply every time, then you should check to see if you have the "Customer Service Ticketing" feature on your hosting plan. This is a feature where you create a dedicated email account (like [email protected]) and the BC system will automatically login to that email account and pull any emails in that inbox and convert them to a customer case for the sender of the email and then it will send out a notification via email to any of the BC Admin users you delegate as "Customer Service Agents". Since the CST integrates with the BC CRM it lets you reply directly within the email-- but when you reply it will be going to that same email address dedicated to the CST but once the CST service checks your email again and sees that you replied to this inquiry it will log your reply against the customer's case and sends your reply via email back to them so that all the correspondance gets logged on BC's CRM but you can still reply via email.
There's no way to use the default web forms to update the "From" or "Reply-To" address.. it must come from an approved email address to avoid spam issues. On most web services you cannot change the "from" address anyway but usually you can at least specify the "Reply-To" address so that when someone hits "reply" in their email client it will reply to whoever you setup as the "Reply-To" address.
Here's some more information about CST: http://kb.worldsecuresystems.com/kb/customer-service-ticketing.html?bc-partner
I don't think the CST feature is in the webMarketing BC plan-- I think it's only in the webCommerce plan so if you have less than an webCommerce plan you have to tell your client to reply through BC by clicking the link in the notification they get. You can justify it by saying its one or two more steps but it keeps the entire convo on record in their CRM for easy referral later.

Problems with the Widget "Text Ticker"

Hello, I have a problem with the widget "Text ticker". I tried to put more then one text ticker on my site, but it doesn't work, when I look in Muse it looks like this:
and when I look in the preview only the first text ticker works...maybe it is not possible to have more then one text ticker on one site?
Thank you.

It seems you are using the same name for all the ticker instances on page.
You need to have unique names for each of the ticker you want on a single page. Tickers with duplicate names will not work.
Cheers,
Vikas

Problem with the browse sequence back and browse sequence next widget placed in the screen layout

Hi,
Some basics: We are using Robohelp 10 to generate multiscreen html5 output. We used the pharmaceutical screen layout downloaded from: http://helpx.adobe.com/robohelp/robohelp-screen-profiles-layouts.html but modified it to match our GUI.
We are having a problem with the browse sequence back and browse sequence next buttons placed in the screen layout from the widgets tool bar. We are in no way experts at this part of Robohelp...and the css portion of all this is a bit of mystery but we have managed to get mostly what we need. Now we just need these buttons to work. In the past we used Airhelp and things worked great. Can anyone help us understand why the sequence buttons are not showing up in the output even though it does in the topic preview?
Also
This shows up in the layout.css file:
a.wBSBackButton {
                margin: 0 8pt 0 0;
                padding: 0;
                background-color: transparent;
img.wBSBackButton {
                border: none;
a.wBSNextButton {
                margin: 0 8pt 0 0;
                padding: 0;
                background-color: transparent;
img.wBSNextButton {
                border: none;
Also btw, I forgot to mention that we are linking our FrameMaker files.
Appreciate the help.
Thanks!

hi pradeep
It does not happen but if you Wait for a while that may be solved

Problem with the MenuBar and how can i delete a own component out of the storage

Hello,
I opened this thread in the category "Flex Builder 2", but
under this category my questions fit better.
I have a problem with the MenuBar and a question to delete a
component out of storage.
1. We have implemented the MenuBar, which was filled
dynamically with XML data.
Sporadically it will appear following fault, if we "mousover"
the root layer.
RangeError: Error #2006: Der angegebene Index liegt
außerhalb des zulässigen Bereichs.
at flash.display::DisplayObjectContainer/addChildAt()
at mx.managers::SystemManager/
http://www.adobe.com/2006/flex/mx/internal::rawChildren_addChildAt()
at mx.managers::SystemManager/addChild()
at mx.managers::PopUpManager$/addPopUp()
at mx.controls::Menu/show()
at mx.controls::MenuBar/::showMenu()
at mx.controls::MenuBar/::mouseOverHandler()
Here a abrid ged version of our XML to create the MenuBar:
<Menuebar>
<menu label="Artikel">
<menu label="Artikel anlegen" data="new_article" />
<menu label="Artikel bearbeiten" data="edit_article" />
<menu label="Verpackung">
<menu label="Verpackung anlegen" data="new_package" />
<menu label="Verpackung bearbeiten" data="edit_package"
/>
</menu>
<menu label="Materialgruppe">
<menu label="Materialgruppe anlegen"
data="new_materialgroup" />
<menu label="Materialgruppe bearbeiten"
data="edit_materialgroup" />
</menu>
</menu>
</Menuebar>
It is a well-formed XML.
2. Delete a component out of storage
We have some own components (basically forms), which will be
created and shown by an construct e.g.
var myComponent : T_Component = new T_Component ;
this.addChild(myComponent)
Some of our forms will be created in an popup. On every call
of the popup, we lost 5 mb or more, all childs on the windows will
be removed by formname.removeAllChild();
What cann we do, that the garbage collector will dispose this
objects.
Is there a way to show all objects with references (NOT
NULL)?
I have read in the Flex Help, that
this.removeChild(myComponent) not delete the form and/or object out
of the storage.
Rather the object must be destroyed.
It is sufficient to call delete(myComponent) about remove
this object out of the storage as the case may be that the
garbage-collector remove this object at any time?
Or how can I destroy a component correctly. What happens with
the widgets on this component e.g. input fields or datagrids?
Are they also being deleted?
Thanks for your help.
Matze

If you mena the "photo Library" then you cannot delete it.
This is how iphone handles photos. There are not two copies. There a re simply two places from which to access the same photos. ALL photos synced to iphone can be accessed via Photo Library. Those same pics can be accessed via their individual folder.

Is anyone having problems with the Health App and Withings?

After upgrading to ios 8.1 I am still having a problem getting my Withings Health Mate data to correctly update my Healt Dashboard. The information that does show up on the different Dashboard widgets is way off. For example, I today walked 2400 steps according to Withings, but the Health Dashboard shows 10,700 steps (720,000 in smaller print on another line). It further shows my daily average at 313,000 steps! Ridiculous.
Walking/Running distance for the days shows 22.5 miles with a daily average of 108 miles.....I'm not Barry Allen/The Flash.

My problems with the Healt App are all over the map. The information on Withings Health Mate is totally accurate, and updates immediately. I have their scale (since 2011) and wireless blood pressure monitor. Also, I find the heart rate senson on the iPhone 6 to work well, every time.
This issue for me is with Apple's Health app. I get ridiculous readings on the Dashboards. For example, it shows my daily average in steps as 170,688, and miles walked at 80. Hardly! Additionally, the Dashbord widgets will disappear/reappear for no reason. I have tried switching the priority of data sources for the steps dashboard between Withings and my iPhone 6 (because it is indicated that the top source governs the dashboard info), to no avail.
Lastly, I don't know how to interpret the infomration on the individual dashboards. On the same line as the word "Steps" there is a number, i.e. 14,272 steps, and just under it the word "Today." However, when I switch from "Day," "Week,," "Month," and "Year," those number don't change. Below the word Today is a number (which changes all the time), and at the bottom of the widget, just above the month (October now) is the number 1,149,749. Nice.
I would like to get the Apple Watch next year, but if the Health App cannot be fixed I may not.

Problem removing the clock

Hi.
As you know, symbian displays three screens that constitutes the desktop.
I wanted to have the clock in the center screen, as i didn't like to have it on the left screen.
So i added it to the center screen, but, i'm not able to remove the widget from my left screen..
How can i do that ?
Thank you
Solved!
Go to Solution.

You can't delete the first homescreen I'm afraid, so you are stuck with the clock on the first screen which also cannot be removed. Sorry.
Cheers.
Ray

Problem with the clock widget

Similar Messages

Maybe you are looking for