Problem with the function module SO_DOCUMENT_SEND_API1

Hi Friends,
I am facing the problem wiht the function module SO_DOCUMENT_SEND_API1,
My actull requirement is : - i need to send the sap data to my externa mail id (Like as XYZ@) with out the any attachment , So i have implemented the code with the function module SO_DOCUMENT_SEND_API1.
The mail has successfully sent the sap inbox (SOST) but the mail are not reached to the external mail ID'S( XYZ@GMAIL)
i Have maintained my code lines same as below.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
    EXPORTING
      document_data = wa_doc_data
      put_in_outbox = ca_x
      commit_work   = ca_x
    TABLES
      packing_list = tb_packing_list
      contents_txt = tb_mailbody
      receivers     = tb_receiver.
Can you please tell me soultion ,
Thanks
charan.

Hi charan,
If u r able to see the mail in sost, then i think ur code has worked fine. if the mail is not going to outside domains from sost u need to do some configurations for that, u can find lots of configuration docs regarding mail setup in sap.
once try to pass below parameter also.
t_receivers1-rec_type = 'U'.
For configuring mail setup u need to sit with ur basis guy.
Moderator message: please do not use SMS speak.
Edited by: Thomas Zloch on Nov 23, 2010 5:51 PM

Similar Messages

Performance problem with OLE_FLUSH_CALL function module

Hello Everyone,
I am facing problem with OLE_FLUSH_CALL function module (execution is taking long time which is going to be dump error).
Could you please help me in knowing solution for this problem?
Thanking you in advance.
Srinivas

Hi Srinivas,
the OLE_FLUSH_CALL does an RFC from ABAP backend to frontend UI. So high execution time could result from high network time, for example latency between UI and backend server.
How many UI interaction steps did you measure for the trace above? Ideally, there should only be one OLE_FLUSH_CALL per user interaction step. If its more, the application is not written in an optimized way.
Best Regards, Randolf

Problem with BAPI_SALESORDER_CHANGE function module

I know lot of posts have been done about problems with this function module. However I was not able to find the answer to my problem. Hence posting a new thread
I have the following code which changes the reason rejection (if required to 'ZF') and also updates the sales order quantity.
The code works absolutely fine as long as the PGI date of the order item is either today or in the future. However if the PGI date of the order item is in the past. I get an error in the t_return table with error type 'E' saying 'PGI date is in the past hence could not update the item'.
If I try to update the same order quantity in VA02 for the item with PGI date in the past it does so without any problem.
Can someone please suggest what the problem might be. Or if there is some other way I can update the quantity. (I dont want to use BDC)
FORM change_sales_order_item USING value(r_rtb_posnrs) TYPE zpsd_ztsdrtb_ro_track
                             CHANGING r_return TYPE type_t_bapiret2.
DATA: v_order_header_in TYPE bapisdh1,
v_order_header_inx TYPE bapisdh1x,
t_schedule_lines TYPE bapischdl OCCURS 0 WITH HEADER LINE,
t_schedule_linesx TYPE bapischdlx OCCURS 0 WITH HEADER LINE,
v_temp_rtb_vbeln TYPE vbeln,
v_temp_rtb_posnr TYPE posnr,
wa_old_rtb_posnrs TYPE ztsdrtb_ro_track,
t_item_in TYPE bapisditm OCCURS 0 WITH HEADER LINE,
t_item_inx TYPE bapisditmx OCCURS 0 WITH HEADER LINE,
v_rtb_old_vbeln TYPE zrtbvbeln,
v_rtb_old_posnr TYPE zrtbposnr,
v_ro_old_vbeln TYPE zrovbeln,
v_ro_old_posnr TYPE zroposnr,
v_rtb_count TYPE i,
v_next_row_index TYPE i,
v_update_order_flg TYPE char1, "Update the sales order flag
v_rtb_record_counter TYPE i,
v_original_vbeln TYPE vbeln,
t_bapiret TYPE STANDARD TABLE OF bapiret2.
FIELD-SYMBOLS: <wa_r_rtb_posnrs> TYPE ztsdrtb_ro_track,
                 <wa_r_rtb_posnr_next> TYPE ztsdrtb_ro_track.
CONSTANTS: c_updateflag TYPE bapisditmx-updateflag VALUE 'U'.
v_order_header_inx-updateflag = 'U'.
Get rid of the duplicate records for the same RTB order. Just use
the last record quantity in the internal table
LOOP AT r_rtb_posnrs ASSIGNING <wa_r_rtb_posnrs>.
    v_rtb_record_counter = v_rtb_record_counter + 1.
    <wa_r_rtb_posnrs>-seqnr = v_rtb_record_counter.
ENDLOOP.
SORT r_rtb_posnrs DESCENDING BY zrtbvbeln zrtbposnr seqnr zrtbconsumedflg.
DELETE ADJACENT DUPLICATES FROM r_rtb_posnrs COMPARING zrtbvbeln zrtbposnr.
DESCRIBE TABLE r_rtb_posnrs LINES v_rtb_count.
v_rtb_record_counter = 0.
v_update_order_flg = space.
LOOP AT r_rtb_posnrs ASSIGNING <wa_r_rtb_posnrs>.
    v_rtb_record_counter = v_rtb_record_counter + 1.
    v_update_order_flg = space.
Popluate the item quantity update flags for schedule lines
    t_schedule_linesx-itm_number = <wa_r_rtb_posnrs>-zrtbposnr.
    t_schedule_linesx-sched_line = '0001'.
    t_schedule_linesx-updateflag = c_updateflag.
    t_schedule_linesx-req_qty = 'X'.
    APPEND t_schedule_linesx.
    CLEAR t_schedule_linesx.
*Item (Order QQuantity Field to be changed "KWMENG")
    t_schedule_lines-itm_number = <wa_r_rtb_posnrs>-zrtbposnr.
    t_schedule_lines-sched_line = '0001'.
    t_schedule_lines-req_qty = <wa_r_rtb_posnrs>-zrtbchgqty.
    APPEND t_schedule_lines.
    CLEAR t_schedule_lines.
If fully consumed then set the rejection flag
    IF <wa_r_rtb_posnrs>-zrtbconsumedflg = 'X'.
      t_item_inx-itm_number = <wa_r_rtb_posnrs>-zrtbposnr.
      t_item_inx-updateflag = 'X'.
      t_item_inx-reason_rej = 'X'.
      APPEND t_item_inx.
      CLEAR t_item_inx.
      t_item_in-itm_number = <wa_r_rtb_posnrs>-zrtbposnr.
      t_item_in-reason_rej = 'ZF'.
      APPEND t_item_in.
      CLEAR t_item_in.
    ELSE.
      t_item_inx-itm_number = <wa_r_rtb_posnrs>-zrtbposnr.
      t_item_inx-updateflag = 'X'.
      t_item_inx-reason_rej = 'X'.
      APPEND t_item_inx.
      CLEAR t_item_inx.
      t_item_in-itm_number = <wa_r_rtb_posnrs>-zrtbposnr.
      t_item_in-reason_rej = ' '.
      APPEND t_item_in.
      CLEAR t_item_in.
    ENDIF.
If you have reached the last line of the RTB intern table update the sales order
*Index pointing to the next row
    v_next_row_index = v_rtb_record_counter + 1.
    IF v_rtb_record_counter = v_rtb_count.
      v_update_order_flg = 'X'.
    ELSEIF v_rtb_record_counter < v_rtb_count.
Get the next row data
      READ TABLE r_rtb_posnrs INDEX v_next_row_index ASSIGNING <wa_r_rtb_posnr_next>.
      IF sy-subrc = 0.
        IF <wa_r_rtb_posnrs>-zrtbvbeln <> <wa_r_rtb_posnr_next>-zrtbvbeln.
          v_update_order_flg = 'X'.
        ENDIF.
      ENDIF.
    ELSE.
      v_update_order_flg = space.
    ENDIF.
update the rtb orders with quantities and the rejection flag (if required)
    IF v_update_order_flg = 'X'.
      CALL FUNCTION 'BAPI_SALESORDER_CHANGE' STARTING NEW TASK 'SOUPDATE'
        PERFORMING callbk_bapi_salesorder_change ON END OF TASK
        EXPORTING
          salesdocument    = <wa_r_rtb_posnrs>-zrtbvbeln
          order_header_in = v_order_header_in
          order_header_inx = v_order_header_inx
        TABLES
          return           = t_return
          schedule_lines   = t_schedule_lines
          schedule_linesx = t_schedule_linesx
          order_item_in    = t_item_in
          order_item_inx   = t_item_inx.
      WAIT UNTIL t_return[] IS NOT INITIAL.
      READ TABLE t_return INTO wa_return WITH KEY type = 'E'.
      IF sy-subrc <> 0.
      ELSE.
        r_return[] = t_return[].
        MESSAGE ID 'ZSD' TYPE 'E' NUMBER 613.
       RAISE errorinorderupdate.
      ENDIF.
      REFRESH t_schedule_linesx.
      REFRESH t_schedule_lines.
      REFRESH t_item_in.
      REFRESH t_item_inx.
      REFRESH t_return.
    ENDIF.
ENDLOOP.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
   IMPORTING
     return = t_bapiret.
ENDFORM.                    "Change_Sales_Order

see the following example and try to do this:
i_hdrx-updateflag = 'U'.
*" Fill required SCHEDULE_LINES data.
i_sched-itm_number = p_posnr.
i_sched-sched_line = p_etenr.
i_sched-req_qty = p_reqqty.
i_schedx-updateflag = 'U'.
i_schedx-itm_number = p_posnr.
i_schedx-sched_line = p_etenr.
i_schedx-req_qty = 'X'.
APPEND i_sched.
APPEND i_schedx.
CALL FUNCTION 'BAPI_SALESORDER_CHANGE'
EXPORTING
salesdocument = p_vbeln
order_header_in = i_hdr
order_header_inx = i_hdrx
TABLES
return = i_ret
schedule_lines = i_sched
schedule_linesx = i_schedx.

Some issue with the Function Module u0093'SKWF_FIND_BY_QUERY' in a BW ECC6.0

Hi All,
Need some urgent help..
Iam facing some issue with the Function Module 'SKWF_FIND_BY_QUERY' in a BW ECC6.0 system.
As shown below, in the function module, the Table IT_PROPERTIES_RESULT gets populated with some values based on inputs like IT_CLASSES, IT_QUERY, and L.
This updation of IT_PROPERTIES_RESULT table is happening for some of the services sent through IT_QUERY and is not getting populated for some.
call function 'SKWF_FIND_BY_QUERY
exporting
CONNECTION_SPACE         =
    OBJ_TYPE                 = 'L'
PTYPE                    =
X_STRICT                 =
IMPORTING
ERROR                    =
     tables
     CLASSES                  = IT_CLASSES
     QUERIES                  = IT_QUERY
     RESULT_OBJECTS           = IT_LOIO
PROPERTIES_REQUEST       = PROPERTIES_RESULT        = IT_PROPERTIES_RESULT.
The values are as follows:-
Values getting populated in IT_CLASSES BW_LO_TRAN               Values getting populated in IT_QUERY 1) BW_QUERY, 2) /BIC/ZSERVICE
I would like to know whether any Standard Customizing BW transaction is present that is maintaining IT_PROPERTIES_RESULT table properties and fetching through this Function Module.
Also, suggest how this issue can be resolved
Thanks & Regards,
Shailesh nagar

Thanks Suhas. That definitely helped.
Also the following links helped.
http://help.sap.com/saphelp_nw70/helpdata/EN/86/1c8c3e94243446e10000000a114084/frameset.htm
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
Cheers,
Preethi

Error thread java : problem with the function "resume 0x***" (forum sun)

One problem with the function of jdb occured when I tried to use it to
pilot the processor with differents threads. In fact, I use a simple example with 2 threads.
I stop the two threads with two breakpoint, and I want to resume one or the other (with the function "resume 0x****"), the one wich I resumed stop again on the breackpoint and I decide again to resume one or the other. All of that to obtain a tree of execution.
I give you the code of the class and the code of jdb.
CLASS: (it's just a object Room with a variable degre that I increment and decrement with two threads increase and decrease)
public class Test{
     public static void main(String[] args){
          Room r = new Room();
          decrease de = new decrease(r);
          increase in = new increase(r);
          de.start();
          in.start();
class Room {
     private volatile int degre=20;
     public void more(){
     degre += 4;
     public void less(){
     degre -= 3;
class decrease extends Thread{
private Room room;
public decrease(Room r){
          room =r;
public void run(){
try{
     while (!interrupted()){
          room.less();
catch(InterruptedException e) {}
class increase extends Thread{
private Room room;
public increase(Room r){
     room =r;
public void run(){
     try{
          while (!interrupted()){
               room.more();
catch(InterruptedException e) {}
JDB:
Initializing jdb ...
stop at Test:7Deferring breakpoint Test:7.
It will be set after the class is loaded.
runrun Test
Set uncaught java.lang.Throwable
Set deferred uncaught java.lang.Throwable
>
VM Started: Set deferred breakpoint Test:7
Breakpoint hit: "thread=main", Test.main(), line=7 bci=30
7 in.start();
main[1] stop at room:16
Set breakpoint room:16
main[1] stop at room:20
Set breakpoint room:20
main[1] resume
All threads resumed.
>
Breakpoint hit: "thread=Thread-0", room.less(), line=20 bci=0
20 degre -= 3;
Thread-0[1] threads
Group system:
(java.lang.ref.Reference$ReferenceHandler)0x10d Reference Handler cond. waiting
(java.lang.ref.Finalizer$FinalizerThread)0x10c Finalizer cond. waiting
(java.lang.Thread)0x10b Signal Dispatcher running
Group main:
(decrease)0x146 Thread-0 running (at breakpoint)
(increase)0x147 Thread-1 running (at breakpoint)
(java.lang.Thread)0x148 DestroyJavaVM running
Thread-0[1] resume 0x147
Thread-0[1]
Breakpoint hit: "thread=Thread-1", room.more(), line=16 bci=0
16 degre += 4;
Thread-1[1] resume 0x147
Thread-1[1]
Breakpoint hit: "thread=Thread-1", room.more(), line=16 bci=0
16 degre += 4;
Thread-1[1] print degre
degre = 24
Thread-1[1] resume 0x146 //It's here the problem, thread 0x146 have to stop on the //next breakpoint of decrease but nothing happen
Thread-1[1] resume 0x147
Thread-1[1]
Breakpoint hit: "thread=Thread-1", room.more(), line=16 bci=0
16 degre += 4;
Thread-1[1] clear
Breakpoints set:
breakpoint Test:7
breakpoint room:16
breakpoint room:20
PS: I tried many other examples with other class and other kind of breakpoints, but, in any cases, on thread doesn't manage to resume. When I try with general resume (no specification of the thread), It works but it isn't interresting for me because I want to decide wich thread continue his execution.

Hi,
I have read the FAQ of the JMF.
The problem was the jar files of the JMF were not in the JRE\BIN\EXT
folder of the Java runtime!
now it works!
thanks
Reg

Could not complete the ... command because of a problem with the filter module interface

I just reinstalled Photoshop CS6. I'm running OS X 10.8.2 .
I use the Nik plugins suite, and reinstalled them as well. Now whenever I try to use one of those plugins I get the error "Could not complete the ... command because of a problem with the filter module interface."
The reinstallation was a bit of a struggle due to issues on Adobe's end, and I am hesitatnt to just dive in and reinstall without wome idea as to what might cause these errors.
Any insight appreciated.
Stu

Not sure I know what you mean by "disabling the Nik filter folder".
I have the latest updates for the Nik filters and they are compatible with CS6.
Since yesterday I tried uninstalling the Nik filters, manually locating and removing every file related to Nik/Nik Software, redownloading the Nik installers, uninstalling/reinstalling Photoshop, and reinstalling the Nik filters. Same result.
I am pretty sure this is something on the Photoshop end, but am not sure what to do next. Maybe repeat the above and use the Creative Suite cleaner before reinstalling?
Stu

Can't use certain filters- "problem with the filter module interface"

Hello,
I frequently use the BPelt Flatten and Multifill plugins and they have always worked perfectly until today. Now I get the following error: "Could not complete the [Multifill/Flatten] command because of a problem with the filter module interface."
I use Photoshop CS6 Extended with the Creative Cloud membership, and just recently updated to version 13.1.1 x64. I believe this may be related, as the plugins worked before the update and nothing else has changed. Any recommendations on how to fix this? Is it possible to undo the update?

Usually this means a bug in the third party plugin that you are using.

Problem with "QC01_Q_CHARACTERISTICS_SELECT" function module

Hi,
Can anyone help me out with the problem that i am facing while using the function module "QC01_Q_CHARACTERISTICS_SELECT"?
This function module is working fine for me for the first time with a specific inspectio lot number but when i call the same function module for the second or third time with the same above data then it gives me an error that "No Characteristics Found"?
I am using this function module in an Interactive ALV report, where the initial list stores all the storage conditions based on the material, plant and batch number we give.
Then in the second list, when the user clicks on the storage conditions we will display the results for that conditions.
This concept is working fine for the first time but not for the second time.
Is there any restriction on the number of times that we have to call this function module?
Can anyone please help me out with this?
Thanks,
Praveen

Hi Praveen,
I observed one thing in the function module that is after executing this function module se37 and gave a lot no in I_QALS i could not get the result initially the system is giving the message
No characteristics were found for inspection lot 040000211677 000000
But for the same lot when i remove the default value 'X' in the field I_WITH_OPERATIONS and tested the result i am able to get the result, Please check this, Hope this helps you.
Regards,
Naveen.

Problems with the function DBMS_XMLSCHEMA.copyEvolve

I´m having problems with the evolution of xml-schema.
First the function DBMS_XMLSCHEMA.copyEvolve works correctly, but since one week I get only errors. Strangely is the fact that I use the same files (xml-schema, xslt and xml instances) and the same SQL-Code. Even if I delete all tables, directories, ... with the drop instruction and create them again, I get only error messages. It is also strangely that the function DBMS_XMLSCHEMA.copyEvolve not works if the old and new xml-schema are identical and no XSLT-Stylesheet is handed over. Can by the function DBMS_XMLSCHEMA.copyEvolve something going wrong in the database ? Do I must recreate the database, and how can I do that by the XE? But that can not be a good solution.
Has anybody a idea what can I do?
Here is my error report:
Error starting at line 1 in command:
BEGIN
DBMS_XMLSCHEMA.copyEvolve(
schemaURLs => xdb$string_list_t('http://localhost:8080/internal/xmlschema/testschema.xsd'),
newSchemas => XMLSequenceType(XDBURIType('/public/testschema_evolution.xsd').getXML()),
transforms => XMLSequenceType(XDBURIType('/public/MapTotestschema_evolution.xslt').getXML()));
END;
Error report:
ORA-30944: Fehler beim Rollback für XML-Schema "http://localhost:8080/internal/xmlschema/testschema.xsd" Tabelle "MYUSER"."XMLSCHEMATABELLE" Spalte ""
ORA-02304: Ungültiges Objektidentifizierungsliteral
ORA-30942: Fehler bei XML Schema Evolution für Schema "http://localhost:8080/internal/xmlschema/testschema.xsd" Tabelle <n/a> Spalte ""
ORA-31088: Objekt "MYUSER"."BIN$QNQjNoYiRfC4KlQtnfUpMw==$0" hängt von Schema ab
ORA-06512: in "XDB.DBMS_XMLSCHEMA_INT", Zeile 113
ORA-06512: in "XDB.DBMS_XMLSCHEMA", Zeile 210
ORA-06512: in Zeile 2
Thanks David

Can you try doing the following before running copyEvolve
SQL> purge recyclebin
2 /
Recyclebin purged.
SQL> alter session set recyclebin = off
2 /
Session altered.
SQL>and see if it works as expected.

Problem in the function module HAZMAT_PRI_DATA_GET

hi all ,
This is related to the shipment.
we are trying to print a form with details of dangerous goods
but function module HAZMAT_PRI_DATA_GET not returning values of the dangerous goods details when the MOT is 05 ie; air .
The function module is a standard one,Is there any SAP-note for this ?
thanks in advance,
Naval Bhatt

Dear All,
When i am using the Function module Table Parameters in the Tab strip, i am getting this error, " Table Parameters are obsolete". My requirement is to get the list of employees which will be more than one. so how can i catch the employee list.
Thanks
Yogesh

Problem with Create_Text Function module

Hi All,
I am using the function module Create_Text to create the text for Condition types in ME31K. Its working fine and creating text when i go to debug mode. Its updating into transactions(ME31K). But if i run the program in back ground or foregorund with out debuging modes its not creating text. Please do let me know any reasons

Hi,
Have you used FM COMMIT_TEXT after CREATE_TEXT ? :
        CALL FUNCTION 'COMMIT_TEXT'
          EXPORTING
            OBJECT   = 'PMS'
            NAME     = W_TDNAME
            ID       = 'LTXT'
            LANGUAGE = 'E'.
Try adding the 'COMMIT_TEXT' and check.
Thanks & Regards,
Faheem.

Problem in the Function module

Dear All,
I am using the ECC 6.0 with all the service packs applied. when i am creating a function module, i am getting an error like " Tables parameters are obsolete". My requirement is to get the internal table structure what should i do???
Thanks in Advance.
Yogesh.

Dear All,
When i am using the Function module Table Parameters in the Tab strip, i am getting this error, " Table Parameters are obsolete". My requirement is to get the list of employees which will be more than one. so how can i catch the employee list.
Thanks
Yogesh

Problems with the function RFC_GET_TABLE_ENTRIES

Hi experts,
We have a external application named P-Synch that is used when a user needs to change or unlock their password on our SAP system. The problem we are presenting is that in our PBP system the application is working fine but in our BW and XI environment when the P-Synch application call the function RFC_GET_TABLE_ENTRIES in SAP it can't take the result of the field 'expiration_date' because for some reason the output for this field is not in the same position that is in the PBP system.
Example:
This are the output that we receive in the environments with the function RFC_GET_TABLE_ENTRIES :
PBP:
000001ú320020401*99991231*AESSUSER
BWP:
0000200408039999*1231AESS*USER
As you see in PBP P-Synch can take the expiration date (in bold) in the correct position '99991231'.... but for some reason in BWP the function present the expiration date in the incorrect position '1231AESS', for that reason the P-Synch application can't change or unlock the user of a person because terminate with error with the expiration date.
Exist a way that I can fix this?
Thanks a lot!
Edited by: Carlos Mercado Aponte on Oct 16, 2009 3:42 PM

Hello Carlos,
Few days back i also faced some problem with the RFC_GET_TABLE_ENTRIES.
May be you can try with RFC_READ_TABLE instead. Not much difference in the way you call the 2 FMs. From my experience i can tell, RFC_GET_TABLE_ENTRIES returns some garbage characters which RFC_READ_TABLE does not.
For details refer to this [link|RFC_READ_TABLE v/s RFC_GET_TABLE_ENTRIES;.
BR,
Suhas

System_failure error with the function module HTTP_POST

Hi Friends,
While executing the function module "HTTP_POST" ,sometime we are getting the error "System_Failure" exception.
Can anyone tell what could be the reason for this exception,any configurations need to be done on SAP???
For this FM we are passing the RFC destination"SAPHTTPA" as one of the paratmeter and
The two import paramters we are passing to this FM are
URI :
http://10.74.40.31:8686/ArchiveBridge/?informaticaArchive&contRep=IA&sumFile=MYTA_SUMMARY_20090820063258.sum
Destintion : SAPHTTPA
Thanks all in advance.
Regards
Dharmaraju

Hi,
Check if any proxy is maitained in the client by going into transaction
SICF-> Goto-> HTTP Client Proxy -> HTTP LOG TAB.
If there is anything maintained under Host name and port, if yes you need to specify the IP address while calling FM HTTP_POST
under PROXY as
192.168.0.1:8080 where first part is IP address & 2nd part(8080) is port.
Also test connection for SAPHTTPA under SM59 to see if its properly configured.
Regards,
Amit

Collection problem with RFC function module WSDL.

Hi.
I have developed an RFC function module in a SAP system version 4.7 (WAS 620). This FM has 2 table parameters. I have no problem when I see the WSDL in the SAP Web Service Browser.
Another team is trying to consume this RFC FM as a web service from a Java application but they say they can't see the table parameters as collections.
Here is the WSDL of the FM, the table parameters are T_MOVIM and T_ERROR:
<?xml version="1.0" encoding="UTF-8" ?>
<definitions xmlns="http://schemas.xmlsoap.org/wsdl/" xmlns:s0="urn:sap-com:document:sap:rfc:functions" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" targetNamespace="urn:sap-com:document:sap:rfc:functions">
     <types>
          <xsd:schema targetNamespace="urn:sap-com:document:sap:rfc:functions">
               <xsd:element name="ZMMFUSAPTK_0001">
                    <xsd:complexType>
                         <xsd:all>
                              <xsd:element name="GENIDOC" minOccurs="0">
                                   <xsd:simpleType>
                                        <xsd:restriction base="xsd:string">
                                             <xsd:maxLength value="1" />
                                        </xsd:restriction>
                                   </xsd:simpleType>
                              </xsd:element>
                              <xsd:element name="T_ERROR">
                                   <xsd:complexType>
                                        <xsd:sequence>
                                             <xsd:element name="item" minOccurs="0" maxOccurs="unbounded" type="s0:ZMMTASAPTK_0012" />
                                        </xsd:sequence>
                                   </xsd:complexType>
                              </xsd:element>
                              <xsd:element name="T_MOVIM">
                                   <xsd:complexType>
                                        <xsd:sequence>
                                             <xsd:element name="item" minOccurs="0" maxOccurs="unbounded" type="s0:ZMMTASAPTK_0011" />
                                        </xsd:sequence>
                                   </xsd:complexType>
                              </xsd:element>
                         </xsd:all>
                    </xsd:complexType>
               </xsd:element>
               <xsd:element name="ZMMFUSAPTK_0001.Response">
                    <xsd:complexType>
                         <xsd:all>
                              <xsd:element name="CODRET">
                                   <xsd:simpleType>
                                        <xsd:restriction base="xsd:string">
                                             <xsd:maxLength value="1" />
                                        </xsd:restriction>
                                   </xsd:simpleType>
                              </xsd:element>
                              <xsd:element name="T_ERROR">
                                   <xsd:complexType>
                                        <xsd:sequence>
                                             <xsd:element name="item" minOccurs="0" maxOccurs="unbounded" type="s0:ZMMTASAPTK_0012" />
                                        </xsd:sequence>
                                   </xsd:complexType>
                              </xsd:element>
                              <xsd:element name="T_MOVIM">
                                   <xsd:complexType>
                                        <xsd:sequence>
                                             <xsd:element name="item" minOccurs="0" maxOccurs="unbounded" type="s0:ZMMTASAPTK_0011" />
                                        </xsd:sequence>
                                   </xsd:complexType>
                              </xsd:element>
                         </xsd:all>
                    </xsd:complexType>
               </xsd:element>
               <xsd:complexType name="ZMMTASAPTK_0011">
                    <xsd:sequence>
                         <xsd:element name="REFERENCIA" minOccurs="0">
                              <xsd:simpleType>
                                   <xsd:restriction base="xsd:string">
                                        <xsd:maxLength value="10" />
                                   </xsd:restriction>
                              </xsd:simpleType>
                         </xsd:element>
                         <xsd:element name="FECHACONT" minOccurs="0">
                              <xsd:simpleType>
                                   <xsd:restriction base="xsd:string">
                                        <xsd:maxLength value="8" />
                                   </xsd:restriction>
                              </xsd:simpleType>
                         </xsd:element>
                         <xsd:element name="FECHADOC" minOccurs="0">
                              <xsd:simpleType>
                                   <xsd:restriction base="xsd:string">
                                        <xsd:maxLength value="8" />
                                   </xsd:restriction>
                              </xsd:simpleType>
                         </xsd:element>
                         <xsd:element name="CODMOV" minOccurs="0">
                              <xsd:simpleType>
                                   <xsd:restriction base="xsd:string">
                                        <xsd:maxLength value="2" />
                                   </xsd:restriction>
                              </xsd:simpleType>
                         </xsd:element>
                         <xsd:element name="NROPLAN" minOccurs="0">
                              <xsd:simpleType>
                                   <xsd:restriction base="xsd:string">
                                        <xsd:maxLength value="12" />
                                   </xsd:restriction>
                              </xsd:simpleType>
                         </xsd:element>
                         <xsd:element name="NROCOMP" minOccurs="0">
                              <xsd:simpleType>
                                   <xsd:restriction base="xsd:string">
                                        <xsd:maxLength value="10" />
                                   </xsd:restriction>
                              </xsd:simpleType>
                         </xsd:element>
                         <xsd:element name="CLASEMOV" minOccurs="0">
                              <xsd:simpleType>
                                   <xsd:restriction base="xsd:string">
                                        <xsd:maxLength value="3" />
                                   </xsd:restriction>
                              </xsd:simpleType>
                         </xsd:element>
                         <xsd:element name="CENTRO" minOccurs="0">
                              <xsd:simpleType>
                                   <xsd:restriction base="xsd:string">
                                        <xsd:maxLength value="4" />
                                   </xsd:restriction>
                              </xsd:simpleType>
                         </xsd:element>
                         <xsd:element name="ALMACEN" minOccurs="0">
                              <xsd:simpleType>
                                   <xsd:restriction base="xsd:string">
                                        <xsd:maxLength value="4" />
                                   </xsd:restriction>
                              </xsd:simpleType>
                         </xsd:element>
                         <xsd:element name="MATERIAL" minOccurs="0">
                              <xsd:simpleType>
                                   <xsd:restriction base="xsd:string">
                                        <xsd:maxLength value="5" />
                                   </xsd:restriction>
                              </xsd:simpleType>
                         </xsd:element>
                         <xsd:element name="LOTE" minOccurs="0">
                              <xsd:simpleType>
                                   <xsd:restriction base="xsd:string">
                                        <xsd:maxLength value="10" />
                                   </xsd:restriction>
                              </xsd:simpleType>
                         </xsd:element>
                         <xsd:element name="CANTIDAD" minOccurs="0">
                              <xsd:simpleType>
                                   <xsd:restriction base="xsd:string">
                                        <xsd:maxLength value="15" />
                                   </xsd:restriction>
                              </xsd:simpleType>
                         </xsd:element>
                         <xsd:element name="MOTIVOMOV" minOccurs="0">
                              <xsd:simpleType>
                                   <xsd:restriction base="xsd:string">
                                        <xsd:maxLength value="4" />
                                   </xsd:restriction>
                              </xsd:simpleType>
                         </xsd:element>
                         <xsd:element name="CENTROREC" minOccurs="0">
                              <xsd:simpleType>
                                   <xsd:restriction base="xsd:string">
                                        <xsd:maxLength value="4" />
                                   </xsd:restriction>
                              </xsd:simpleType>
                         </xsd:element>
                         <xsd:element name="ALMACENREC" minOccurs="0">
                              <xsd:simpleType>
                                   <xsd:restriction base="xsd:string">
                                        <xsd:maxLength value="4" />
                                   </xsd:restriction>
                              </xsd:simpleType>
                         </xsd:element>
                         <xsd:element name="CENTROCTO" minOccurs="0">
                              <xsd:simpleType>
                                   <xsd:restriction base="xsd:string">
                                        <xsd:maxLength value="10" />
                                   </xsd:restriction>
                              </xsd:simpleType>
                         </xsd:element>
                         <xsd:element name="ORDEN" minOccurs="0">
                              <xsd:simpleType>
                                   <xsd:restriction base="xsd:string">
                                        <xsd:maxLength value="12" />
                                   </xsd:restriction>
                              </xsd:simpleType>
                         </xsd:element>
                         <xsd:element name="TIPOSTK" minOccurs="0">
                              <xsd:simpleType>
                                   <xsd:restriction base="xsd:string">
                                        <xsd:maxLength value="1" />
                                   </xsd:restriction>
                              </xsd:simpleType>
                         </xsd:element>
                         <xsd:element name="NROPEDIDO" minOccurs="0">
                              <xsd:simpleType>
                                   <xsd:restriction base="xsd:string">
                                        <xsd:maxLength value="10" />
                                   </xsd:restriction>
                              </xsd:simpleType>
                         </xsd:element>
                         <xsd:element name="CODCISTERNA" minOccurs="0">
                              <xsd:simpleType>
                                   <xsd:restriction base="xsd:string">
                                        <xsd:maxLength value="50" />
                                   </xsd:restriction>
                              </xsd:simpleType>
                         </xsd:element>
                    </xsd:sequence>
               </xsd:complexType>
               <xsd:complexType name="ZMMTASAPTK_0012">
                    <xsd:sequence>
                         <xsd:element name="REFERENCIA" minOccurs="0">
                              <xsd:simpleType>
                                   <xsd:restriction base="xsd:string">
                                        <xsd:maxLength value="10" />
                                   </xsd:restriction>
                              </xsd:simpleType>
                         </xsd:element>
                         <xsd:element name="CODERR" minOccurs="0">
                              <xsd:simpleType>
                                   <xsd:restriction base="xsd:string">
                                        <xsd:maxLength value="3" />
                                   </xsd:restriction>
                              </xsd:simpleType>
                         </xsd:element>
                         <xsd:element name="MSJERR" minOccurs="0">
                              <xsd:simpleType>
                                   <xsd:restriction base="xsd:string">
                                        <xsd:maxLength value="100" />
                                   </xsd:restriction>
                              </xsd:simpleType>
                         </xsd:element>
                    </xsd:sequence>
               </xsd:complexType>
          </xsd:schema>
     </types>
     <message name="ZMMFUSAPTK_0001Input">
          <part name="parameters" element="s0:ZMMFUSAPTK_0001" />
     </message>
     <message name="ZMMFUSAPTK_0001Output">
          <part name="parameters" element="s0:ZMMFUSAPTK_0001.Response" />
     </message>
     <portType name="ZMMFUSAPTK_0001PortType">
          <operation name="ZMMFUSAPTK_0001">
               <input message="s0:ZMMFUSAPTK_0001Input" />
               <output message="s0:ZMMFUSAPTK_0001Output" />
          </operation>
     </portType>
     <binding name="ZMMFUSAPTK_0001Binding" type="s0:ZMMFUSAPTK_0001PortType">
          <soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http" />
          <operation name="ZMMFUSAPTK_0001">
               <soap:operation soapAction="http://www.sap.com/ZMMFUSAPTK_0001" />
               <input>
                    <soap:body use="literal" />
               </input>
               <output>
                    <soap:body use="literal" />
               </output>
          </operation>
     </binding>
     <service name="ZMMFUSAPTK_0001Service">
          <documentation>SAP Service ZMMFUSAPTK_0001 via SOAP</documentation>
          <port name="ZMMFUSAPTK_0001PortType" binding="s0:ZMMFUSAPTK_0001Binding">
               <soap:address location="http://dbades00.bue.bemberg.com.ar:8002/sap/bc/soap/rfc" />
          </port>
     </service>
</definitions>
Should I change something in the definition of the parameters of the FM? or the problem is with the parsing process on the other system?
Thanks in advance.
Fabian.

Welcome to SDN.
I am not sure about this particular issue, but i have used WSDL from WAS6.20 system in MS Office infopath to consume webservice where we have had table parameters without any issue.
may be try with office infopath to make sure that the problem is with the WSDL or with the java application.
Regards
Raja

Problem with the function module SO_DOCUMENT_SEND_API1

Similar Messages

Maybe you are looking for